Central Gas Supply Systems

Transcription

1 Central Gas Supply Systems We hit the gas

2 Your contact persons / Your way to us Your way to us your way to our production in Solingen for your navigation system Please enter the following address: Stadt: Solingen Straße: Erikaweg Due to the fact that the other side of the Bonner Straße (street) at our company has another name, Ohligser Straße (street), no actual navigation system is able to find our number 305. Close to our premises the Erikaweg exits from the Bonner Straße (street). When your navigation systems tells you please turn into the Erikaweg, you can see our company. Exit Solingen (20) Google Maps The Vulkan Team is yours at any time Management Rolf Everwand + 49 (0)212 / rolf@everwand.de Michael Everwand + 49 (0)212 / michael@everwand.de Sales/Technique Manfred Biermann + 49 (0)212 / m.biermann@everwand.de Guido Fiebig + 49 (0)212 / g.fiebig@everwand.de Sven Tetzlaff + 49 (0)212 / s.tetzlaff@everwand.de Sales Margarete Bortz + 49 (0)212 / m.bortz@everwand.de Petra Quabus + 49 (0)212 / p.quabus@everwand.de Purchase Sabine Schulte-Meier + 49 (0)212 / s.schultemeier@everwand.de Shipping department Gerd Bülte + 49 (0)212 / g.buelte@everwand.de Accountancy Irena Hyza + 49 (0)212 / i.hyza@everwand.de Fax + 49 (0)212 /

3 Responsible for the content: Everwand & Fell GmbH Bonner Straße 305 D Solingen IMPRESSUM Impressum P.O. Box: D Solingen Telephone: +49 (0)212 / Fax: +49 (0)212 / info@everwand.de Managing Directors: Rolf Everwand, Michael Everwand Place of business: Solingen, Deutschland register court: Wuppertal, HRB Vat number: DE Photos: Manfred Biermann, Martin Leclaire, Helge Pohl, Cedric Schanze, Marcel Schauer - Fotolia.com Text and Project management: Aline Scholz, D-Cologne Design: Thomas Gebhard, Köln, Daniel Giesen, D-Cologne Print: W+S Druck und Medien GmbH, D-Troisdorf-Spich Bank details: National Bank AG bank code account no BIC NBAG DE 3 E IBAN DE Sparkasse Langenfeld bank code account no BIC WELADED1LAF IBAN DE Commerzbank AG bank code account no BIC COBADEFF342 IBAN DE The Managing Directors accept no responsibility for changings and factual errors. Issue September

4 Content CONTENT Imprint, Bank Data... Page 3 Everwand-group... Page 5 Automatic manifolds Modula... Page 12 Manual manifolds Modula Vareo... Page 16 Rail systems Modula Vareo... Page 19 Single cylinder- and Single bundle manifold Modula... Page 21 Cylinder and bundle hoses Vareo... Page 24 Cylinder and bundle hoses standard... Page 25 Cylinder and bundle hoses standard and Vareo... Page 26 Tapping point Vulkan... Page 27 Manifold regulators Vulkan acc. to ISO Page 30 In-line regulator Vulkan... Page 37 Pressure regulator Vulkan acc. to ISO Page 43 Accessories... Page 48 Accessories - Tube fittings and flashback arrestors... Page 54 Accessories for regulators and Spare part sets Vulkan... Page 55 Spare part sets Vulkan... Page 56 Accessories for regulators... Page 58 Flow charts... Page 59 LABLINE Automatic manifolds Modula... Page 62 Manual manifolds Modula Vareo... Page 63 Rail systems Vareo / Single cylinder manifolds Vareo... Page 64 Cylinder and bundle hoses Vulkan... Page 65 Tapping point Vulkan... Page 66 In-line regulator Vulkan... Page 67 Pressure regulator Vulkan acc. to ISO Page 68 Accessories Vulkan LabLine... Page 71 Spare part sets for regulators and manifolds... Page 73 Flow charts... Page 74 4

5 FRESH IDEAS MEET 100 YEARS OF EXPERIENCE INNOVATION>100 JAHRE YEARSTRADITION Everwand Since many years the Everwand-group is a well-known part of the gas industry. From single components to complete solutions or services for technical or medical gases as well as for high purity gases, piping constructions and automated welding or brazing machines Everwand has a wide product range and supplies global players around the world. As a family owned company looking back on more than 100 years of history, Everwand benefi ts from its large wealth of experience and combines that with modern and innovative concepts. The subject gas was omnipresent at home and it is always fascinating. I was particularly interested in bringing new ideas into our company after my studies. (Michael Everwand) The brand name Vulkan made by Everwand, stands for conscientious precision work continual further development and state of the technology. Also our online shop is constantly updated. contains all important information about the Vulkan products. Ordering online you will benefi t from attractive prices and special offers. This service is open 24 hours a day, enabling you to browse and order where ever and when ever you want. Responsible for the online-shop: Ingo Knautz, gasetechnik24 KG, Rechenweg 16, Solingen gasetechnik24 5

6 Everwand Some major facts in brief Foundation: 1911 Number of employees: 60 Management: Rolf Everwand and Michael Everwand Product range: Single components, regulators, manifolds, individual complete solutions for central gas manifolds for technical and medical gases, plant and pipeline engineering and construction, special purpose welding and brazing machines Certification: Certified acc. to the Pressure Equipment Directive 2014/68/EU Memberships: DVS, VDMA, standard committee Welding DIN, supporting group standard committee Welding DIN DIN, DVS (in association brazing ) Quality: consistently in-house quality management TECHNICAL PROGRESS WITH THE VIEW TO OUR ENVIRONMENT Nowadays everybody is talking about environmental protection and sustainability. Since many years the Everwand group committed itself to highest quality and safety standards at its own production. That also requests a most possible sustainable manufacturing and the utilisation of recyclable materials. The use of state-of-the-art hardware minimizes the energy input, creates the production more efficient and environmentally compliant. Today the environment concerns everyone, but especially enterprises bear a huge responsibility. Since many years we pay attention to a sustainable and preserving production! (Michael Everwand) All products are Made in Germany and all vendor parts are made in the EU not to guarantee only a imum quality, but also to reduce the emission and to preserve our environment. The label Made in Germany fully applies to our products, as we only manufacture in Germany. (Rolf Everwand) Everwand: Expertise, progress, sustainability around gas. 6

7 EVEN IF VULKAN DOESN T STAND ON THE COVER, VULKAN MIGHT BE INSIDE! Everwand Today you can find Vulkan quality also there where you do not expect it. Since many years the Everwand-group is an OEM (Original Equipment Manufacturer) for many well-known companies of Vulkan-products, which they distribute under their own labels. Our aim is to continue partnership with the best, by providing top-quality products and service. We supply to the following industries: Gas industry Medical industry Automotive industry Heat exchanger industry Glass industry, food industry, Laboratory- and high purity technology Steel and Ship building industry 7

8 Everwand CUSTOM MADE YOU CAN ALWAYS FIND THE PERFECT SOLUTION The Vulkan catalogue shows a variety of different components for the central gas supply. However, the needs and the requirements of our customers and the variety of applications are beginning to differ more and more. 40 years ago the Everwand Group already began to design and deliver individual customized systems. From experience we learned: There is always a perfect solution and we love to rack our brains until we find this solution. (Michael Everwand) Everwand is a full-service provider, supplying the entire range from a single source. Planning, design engineering, assembly as well as maintenance, always in a top quality and with fair conditions. Let us convince you from our comprehensive range of services. Our competent team will advise and support you in all issues regarding your application. 8

9 EVERWAND DRUCKGASTECHNIK GMBH HOSES AND MORE Everwand Since acquiring the Hummel Engineering Products GmbH in 2002, the Everwand-group produces in Solingen/Germany high-quality hose systems for high and low pressure, technical- and cryogenic gases. Furthermore, a core competence of the company lies in developing special solutions tailored to suit individual customer needs. Maximum operational reliability is our supreme goal. Each product undergoes a strict in-house quality control procedure, and only passes this if it complies with the high quality criteria we set for Vulkan products. VULKAN-BRAZING TECHNOLOGY BRAZING MACHINES MADE IN SOLINGEN ARE OPERATING ALL OVER THE WORLD What do fluid components for automotive applications, HVAC components, solar collectors, steel pipe furnitures, domestic appliances, sanitary fittings, or carbide tools have in common? Automated brazing is typically required to manufacture such components and Vulkan Brazing Machines are often used to perform that work. For more than 25 years, the Everwand brazing specialists have been providing now solutions for the automation of brazing processes. Solutions, that are specifically tailored to the individual needs of our customers. Right from the project start with first advisory discussions and demand analysis up to the installation and commissioning of the machine, in all phases of a project we maintain in a close dialogue with our clients. Thus, customized brazing machines are created, that meet all the high standards set by the industry. 9

10 Everwand CENTRAL GAS SUPPLY 4.0 GAS MONITORING FOR THE INDUSTRY 4.0 The uninterrupted and frictionless operation of your production becomes more and more important. A blackout means unexpected costs. Shutdown periods cause delayed delivery times and so upset customers. Consequently it is absolutely necessary to monitor not only machines and technical equipment, but also the gas supply. Only a permanent and failure-free supply for your production with gas guarantees a high quality finishing of your products and ensures hence the satisfaction of your customers. Welcome to the gas supply 4.0 The modern Vulkan Gas monitoring systems monitor permanently all necessary operation pressure and indicate immediately any deviation and interruption, which can be solved instantaneously. If needed, every single incoming gas cylinder can be scanned and registered, to even avoid a wrong connection to the gas supply system. In addition to this you can display all operation conditions on the GasMoApp on your tablet (ipad). So you have access to all of your operating data of your gas supply system at any time all over the world. The Gasmonitoring APP The Gasmonitoring App is able to indicate you any operation condition of your gas supply system on your IOS ipad, and to generate any indications and reports of actual changings or disruptions. All data of the transducers and sensors will be transfered by a small control cabinet via WLAN or GSM to an external server (cloud). The App in combination with your ipad (on iphone actually not available) can receive and show these data. displays clearly gas cylinder pressures shows the different s and concentrations the actual state of the supply is disposable for every gas line status and alarm messages can indicated multi storage management is possible identification of supply stocks and possible shortages 10

11 Vulkan TecLine VULKAN FOR TECHNICAL GASES 11

12 Automatic manifolds LabLine Modula Vulkan Automatic manifold Modula At the fully automatic change-over device, the working pressure is adjusted through the pressure regulator. The switch from the empty to the full side will occur here automatically with the help of the change-over block which is installed between the two main pressure regulators. It is important that both manifold regulators are adjusted to the same working pressure. This is done by the manufacturer. If the cylinders or bundles on one side are empty, the pressure of the cylinders is reduced, leading to a reduction of the working pressure of the manifold regulator adjacent to the change-over block. If the working pressure of the main pressure regulator drops by more than 3-4/5-7 bar below the programmed pressure, the tension of the spring inside of the change-over block will cause the piston to move to the full side. If the empty cylinders or bundles are replaced, they must be opened again, so that the full pressure comes up to the automatic change-over device. This does not cause another switch of the change-over block. The switch will occur only at the time when the side currently in use is empty Automatic manifold Modula AM 35/300 K for oxygen and other gases except acetylene Modula add on system, can be expanded to your requirements consisting of: 2 Manifold regulators H 20 acc. to ISO 7291, adiabatic compression tested 1 In-line regulator AD 35 1 Automatic change over block 1 Main shut off valve 2 contact gauges with Reed switch (optional) acc. to DIN EN complete on stainless steel base plate Body brass pe 300 bar pa 0-10 bar Seals EPDM, polyamide, Viton, PTFE Q 50 Nm³/h at pa 10 bar Diaphragm PTFE de M 24x1,5 RH da G 3/8x10 mm Leakage rate 1x10-6mbar l/s B 450 mm H 420 mm Temperaturee -20 to +60 C T 210 mm M 11,0 kg with contact gauge without contact gauge Oxygen nitrogen argon helium hydrogen compressed air Automatic manifold Modula AM 35/300 H as AM 35 KH, but without In-line regulator, working pressure pre-adjusted at 20 bar Body brass pe 300 bar pa 20 bar Seals EPDM, polyamide, Viton, PTFE Q 120 Nm 3 /h at pa 20 bar Diaphragm PTFE de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 450 mm H 340 mm Temperature -20 to +60 C T 210 mm M 9,0 kg Article-no. with contact gauge Article-no. without contact gauge Oxygen nitrogen argon helium hydrogen compressed air

13 Automatic Manifold AM 40/300 as AM 35/300 H, but with working pressure pre-adjusted at 40 bar Body brass pe 300 bar pa 40 bar Seals EPDM, polyamide, Viton, PTFE Q 160 Nm 3 /h at pa 40 bar Diaphragm PTFE de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 530 mm H 400 mm Temperature -20 to +60 C T 210 mm M 9,5 kg Article-no. with contact gauge Article-no. without contact gauge nitrogen argon helium hydrogen compressed air Automatic manifolds LabLine Modula Vulkan Automatic manifold Modula AM 45/300 K for oxygen and other gases except acetylene Modula add on system, can be expanded to your requirements consisting of: 2 Manifold fin regulators HR 20 acc. to ISO 7291, BAM approved pre-adjusted 1 Automatic change over block 1 Main shut off valve 2 contact gauge acc. to DIN EN optional with Reed switch, complete on stainless steel base plate Body brass pe 300 bar pa 20 bar Seals EPDM, polyamide, Viton Q 170 Nm 3 /h at pa 20 bar Diaphragm PTFE de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 500 mm H 370 mm Temperature -20 to +60 C T 230 mm M 12,5 kg Article-no. with contact gauge Article-no. without contact gauge oxygen nitrogen argon helium hydrogen compressed air Automatic manifold Modula AM 55/300 K for oxygen and other gases except acetylene Modula add on system, can be expanded to your requirements consisting of: 2 Manifold fin regulators HR 40 acc. to ISO 7192, adiabatic compression tested, O 2 with metal diaphragm 1 Automatic change over block 1 Main shut off valve 2 contact gauge acc. to DIN EN optional with Reed switch, complete on stainless steel base plate Body brass pe 300 bar pa 28 bar Seals EPDM, polyamide, Viton Q 250 Nm 3 /h at pa 28 bar Diaphragm rubber; with O2: V2A de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 500 mm H 380 mm Temperature -20 to +60 C T 230 mm M 15,0 kg Article-no. with contact gauge Article-no. without contact gauge oxygen nitrogen argon helium hydrogen compressed air

14 Automatic manifolds Modula Automatic manifold Modula AM 35/300 KM for oxygen and other gases except acetylene Modula add on system, can be expanded to your requirements with solenoid valves for more precise switching processes and lower difference pressures between left and right side consisting of: 2 Manifold regulators H 20 acc. to ISO 7291, adiabatic compression tested 1 In-line regulator AD 35 1 double non return valve, 1 Main shut off valve 2 solenoid valves 24V AC, normally closed 2 contact gauge acc. to DIN EN with Reed switch, complete on stainless steel base plate Body brass pe 300 bar pa 0-10 bar Seals EPDM, polyamide, Viton Q 50 Nm 3 /h at pa 10 bar Diaphragm PTFE de M 24x1,5 RH da G 3/8x10 mm Leakage rate 1x10-6mbar l/s B 690 mm H 430 mm Temperature -20 to +60 C T 210 mm M 12,5 kg oxygen nitrogen argon helium hydrogen compressed air Automatic manifold Modula AM 35/300 KHM for oxygen, inert gases and fuel gases except acetylene Modula add on system, can be expanded to your requirements as AM 35/300 KM, but without In-line regulator working pressure pre-adjusted at 20 bar Body brass pe 300 bar pa 20 bar Seals EPDM, polyamide, Viton Q 120 Nm 3 /h at pa 20 bar Diaphragm PTFE de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 690 mm H 350 mm Temperature -20 to +60 C T 210 mm M 11,0 kg oxygen nitrogen argon helium hydrogen compressed air Automatic manifold Modula AM 40/300 KM for inert gases and fuel gases except acetylene Modula add on system, can be expanded to your requirements consisting of: 2 Manifold regulators H 40 acc. to ISO 7291, adiabatic compression tested 1 double non return valve, 1 Main shut off valve 2 solenoid valves 24V AC, normally closed 2 contact gauge acc. to DIN EN with Reed switch, complete on stainless steel base plate Body brass pe 300 bar pa 40 bar Seals EPDM, polyamide, Viton Q 160 Nm 3 /h at pa 40 bar Diaphragm PTFE de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 690 mm H 350 mm Temperature -20 to +60 C T 210 mm M 11,0 kg oxygen 25 bar working pressure nitrogen argon helium hydrogen compressed air

15 Automatic manifold Modula AM 45/300 KM for oxygen and other gases except acetylene Modula add on system, can be expanded to your requirements consisting of: 2 Manifold fin regulators HR 20 acc. to ISO 7291, adiabatic compression tested 1 double non return valve, 1 Main shut off valve 2 solenoid valves 24V AC, normally closed 2 contact gauge acc. to DIN EN with Reed switch, complete on stainless steel base plate Body brass pe 300 bar pa 20 bar Seals EPDM, polyamide, Viton Q 170 Nm 3 /h at pa 20 bar Diaphragm rubber de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 720 mm H 385 mm Temperature -20 to +60 C T 210 mm M 13,0 kg oxygen nitrogen argon helium hydrogen Compressed air Automatic manifolds Modula 15

16 Manual manifolds Modula Vareo Manual manifold Modula Vareo 300 bar Modula add-on system, for cylinders- and bundles, flexible and always expandable. The heart of this system is the distributing block Modula Vareo which consists of 2 inlets for 2 cylinders or bundles and 2 outlets to connecting a manifold regulator or further distributing blocks Modula Vareo. The distributing block Modula Vareo contains the following components: 2 shut off valves to shut off the cylinders or bundles, 2 non return valves prevent the reverse flow of the gas into empty cylinders or bundles, 2 sinter metal filters prevent the penetration of dirt and extendthe life cycle of the complete manifold. Optionally: 2 purge valves Your advantages of Modula Vareo: - compact construction - all functions in one block - modular system - always expandable - easy assembly - only few thread connections - easy maintenance - all components are easily exchangeable - individual - for 300 bar or 200 bar These components are available: Base station BS One distributing block Modula Vareo with manifold regulator and shut off valve completely fixed. For 2 x 1 cylinders or 2 x 1 bundles or for the connection of further manifold stations VS to connect more cylinders or bundles. Manifold station VS Replaces the traditional rail system. To connect to other manifold systems or to connect to a base station. Base station Modula Vareo BS 60/300 consisting of one distributing block Vareo with two inlets for 2x1 cylinder or 2x1 bundle or for the connection of further distributing blocks Vareo, 1 Manifold regulator H 20 acc. to ISO 7291, adiabatic compression tested 1 Main shut off valve complete on stainless steel base plate also with incorporated gas pre-heater GPH 200 available Body brass pe 300 bar pa 0-20 bar Seals EPDM, polyamide, Viton Q 75 Nm³/h at pa 20 bar Diaphragm PTFE de M 24x1,5 RH da G3/4x18 mm Leakage rate 1x10-6mbar l/s B 570 mm H 250 mm Temperature -20 to +60 C T 210 mm M 10,0 kg oxygen nitrogen argon helium hydrogen compressed air Base station Modula Vareo BS 80/300 as Modula Vareo BS 60, but with manifold fin regulator HR 20 also with incorporated gas pre-heater GPH 200 available Body brass pe 300 bar pa 0-20 bar Seals EPDM, polyamide, Viton Q 170 Nm 3 /h at pa 20 bar Diaphragm rubber de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 590 mm H 250 mm Temperature -20 to +60 C T 210 mm M 11,0 kg oxygen nitrogen argon helium hydrogen compressed air

17 Base station Modula Vareo BS 100/300 as Modula Vareo BS 60, but with Manifold fin regulator HR 40 Base station Modula Vareo BS 120/300 as Modula Vareo BS 60, but with Manifold fin regulator HR 60 Body brass pe 300 bar pa bar Seals EPDM, polyamide, Viton Q 290 Nm³/h at pa 40 bar Diaphragm rubber; with O 2 : V2A de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 590 mm H 270 mm Temperature -20 to +60 C T 210 mm M 14,0 kg oxygen nitrogen argon helium hydrogen compressed air Body brass pe 300 bar pa bar Seals EPDM, polyamide, Viton Q 450 Nm 3 /h at pa 60 bar Diaphragm rubber; with O 2 : V2A de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 590 mm H 270 mm Temperature -20 to +60 C T 210 mm M 14,0 kg Manual manifolds Modula Vareo oxygen nitrogen argon helium hydrogen compressed air Base station Modula Vareo BS 200/300 as Modula Vareo BS 60, but with Manifold regulator LHR 300/200 Body brass pe 300 bar pa bar Seals EPDM, PCTFE Q 480 Nm 3 /h at pa 200 bar Diaphragm brass de M 24x1,5 RH da G 1/2 Rhi Leakage rate 1x10-6mbar l/s B 590 mm H 330 mm Temperature -20 to +60 C T 285 mm M 12,0 kg oxygen Flow direction from right to left nitrogen argon helium hydrogen compressed air Base station Modula Vareo BS 270/300 as BS 200/300 but with working pressure up to 270 bar Body brass pe 300 bar pa bar Seals EPDM, PCTFE Q 480 Nm 3 /h at pa 200 bar Diaphragm brass de M 24x1,5 RH da G 1/2 Rhi Leakage rate 1x10-6mbar l/s B 590 mm H 330 mm Temperature -20 to +60 C T 285 mm M 12,0 kg oxygen Flow direction from right to left nitrogen argon helium hydrogen compressed air

18 Manual manifolds Modula Vareo Base station Modula Vareo BSA 10 F for acetylene for 2x1 cylinder acc. to ISO 14114, consisting of one distributing block Vareo with two inlets for 2x1 cylinder or for connection of further distributing blocks Vareo Vareo 1 Manual Quick cut off valve acc. to ISO 15615, 1 Flashback arrestor acc. to EN 730 and ISO 15615, and Manifold regulator HA10 acc. to ISO 7291 complete on stainless steel base plate Base station Modula Vareo BSA 10 B for acetylene for 2x1 bundles, acc. to ISO as Modula Vareo BSA 10F, but complete with Automatic Quick cut off valve for bundles Body brass pe 26 bar pa 0-1,5 bar Seals EPDM, polyamide, Viton Q 10 Nm 3 /h at pa 1,5 bar Diaphragm PTFE de W21,8x1/14 LH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 860 mm H 250 mm Temperature -20 to +60 C T 210 mm M 14,5 kg acetylene Body brass pe 26 bar pa 0-1,5 bar Seals EPDM, polyamide, Viton Q 10 Nm³/h at pa 1,5 bar Diaphragm EPDM de W21,8x1/14LH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 850 mm H 250 mm Temperature -20 to +60 C T 210 mm M 15,0 kg acetylene Base station Modula Vareo BSA 20 B for acetylene for 2x1 bundle, acc. to ISO as Modula Vareo BSA 10 B, but with Manifold regulator H 20 acetylene, flow 18 Nm 3 /h Body brass pe 26 bar pa 0-1,5 bar Seals EPDM, polyamide, Viton Q 18 Nm³/h at pa 1,5 bar Diaphragm EPDM de W21,8x1/14LH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 980 mm H 250 mm Temperature -20 to +60 C T 230 mm M 19,0 kg acetylene Base station Modula Vareo BSA 40 B for Acetylen, for 2x1 Bundle, acc. to ISO 14114, as BSA 20 B, but with manifold regulator H 40 acetylene, flow 38 Nm³/h Body brass pe 26 bar pa 0-1,5 bar Seals EPDM, polyamide, Viton Q 38 Nm³/h at pa 1,5 bar Diaphragm EPDM de W21,8x1/14LH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 980 mm H 275 mm Temperature -20 to +60 C T 210 mm M 26,0 kg acetylene Purge valve Vareo to fit into manifold station or base station Modula Vareo, complete with shut off valve and optionally with clamp ring outlet Ø 10 mm, for connection of a purging pipe system type without clamp ring in outlet with clamp ring in outlet to connect to outlet of Vareo VS

19 Manifold stations Modula Vareo The manifold stations Modula Vareo replace the classic rail systems. One manifold station is designed for the connection of two cylinders or two bundles. It can be connected to one base station and one other manifold station or with two other manifold stations. The manifold stations consists of two sinter filters, two non return valves and two shut off valves. Optionally every inlet can be equipped with a purge valve, including the possibility to connect a purging pipe system. Manifold station Modula Vareo VS as rail system with two inlets for two cylinders or two bundles and connection to base stations Modula Vareo BS or to further manifold stations Body brass p 300 bar Seals FKM (Viton), EPDM de M24x1,5RH da M24x1,5 RH Leakage rate 1x10-6mbar l/s B 190 mm H 190 mm Temperature -20 to +60 C T 235 mm M 5,0 kg Rail systems Modula Vareo type for oxygen, inert gases, fuel gases except acetylene for acetylene inlet W21,8x1/14LH Manifold station Modula Vareo VSD as Manifold stations VS but without non return valve and sintered filter type for oxygen, inert gases, fuel gases except acetylene Manifold station Modula Vareo VSL as Manifold stations VS but without shut off valve type for oxygen, inert gases, fuel gases except acetylene Railsystem Vulkan Vareo For all gases excpet acetylene, inlets M24x1,5RHak with non return valve and filter, connection to manifold, M24x1,5RHk nut Material brass/copper P 300 bar Seals EPDM de M24x1,5RHak da M24x1,5RHnut Leakage rate 1x10-6mbar l/s Temperature -20 to +60 C quantity inlets left side right side

20 Rail systems Modula Vareo Connecting pipes Vareo DN 10 to connect manifold station to base station or to automatic manifolds Modula as well as manifold stations to each other connecting pipe VB, 90 bent, length 2x 150 mm to connect a manifold station to a base station, for cylinders type for oxygen, inert gases, fuel gases except acetylene for acetylene connecting pipe VU, 2x bent, length 300 mm to connect a manifold station to an automatic or manual manifold for cylinders type for oxygen, inert gases, fuel gases except acetylene for acetylene connecting pipe VF, straight, length 400 mm to connect two manifold stations, for cylinders type for oxygen, inert gases, fuel gases except acetylene for acetylene connecting pipe VBP, 90 bent, length 900 mm x 150 mm to connect a manifold station to a base station, for bundles type for oxygen, inert gases, fuel gases except acetylene for acetylene connecting pipe VP, straight, length 900 mm to connect two manifold stations, for bundles type for oxygen, inert gases, fuel gases except acetylene for acetylene connecting pipe VPU, 2x bent, length 900 mm to connect a manifold station to an automatic manifold and base station for bundles type for oxygen, inert gases, fuel gases except acetylene for acetylene Cylinder rack Vulkan for wall fixture. To protect the gas cylinder against overbalancing. Complete made from stainless steel with edge protection, chain and snap hook for easy change of the cylinder type Quantity cylinder Width Vulkan 1x1 1 cylinder 280 mm Vulkan 1x2 2 cylinders 560 mm Vulkan 1x3 3 cylinders 840 mm

21 Single cylinder manifold Modula SE 10/300 K for oxygen and other gases, Modula add-on system, consisting of: 1 HP-shut off valve, 1 Manifold regulator H 10 acc. to ISO 7291, adiabatic compression tested, 1 Main shut off valve, 1 cylinder rack, complete on stainless steel base plate for acetylene including flashback arrestor acc. to EN 730, adjustable 0-1,5 bar, 5 Nm3/h Single cylinder manifold Modula SE 20/300 K as SE 10 but with Manifold regulator H 20, adjustable 0-20 bar Body brass pe 300 bar pa 0-10 bar Seals EPDM, polyamide Q 50 Nm³/h at pa 10 bar Diaphragm EPDM/PTFE de M 24x1,5 RH da G 3/8x10/12 mm Leakage rate 1x10-6mbar l/s B 420 mm H 260 mm Temperature -20 to +60 C T 110 mm M 4,5 kg with contact gauge without contact gauge oxygen acetylene nitrogen argon helium hydrogen compressed air Body brass pe 300 bar pa 0-20 bar Seals EPDM, polyamide Q 75 Nm³/h at pa 20 bar Diaphragm PTFE de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 420 mm H 320 mm Temperature -20 to +60 C T 110 mm M 5,0 kg with contact gauge without contact gauge oxygen nitrogen argon helium hydrogen compressed air Single cylinder- and -Single bundle manifolds Modula Single bundle manifold acetylene Modula EB 10 K acc. to ISO consisting of: 1 Manifold regulator HA 10 acc. to ISO 7291, 1 Automatic Quick cut off valve acc. to ISO 15615, adiabatic compression tested 1 Flashback arrestor acc. to EN 730, 1 Main shut off valve, complete on stainless steel base plate Body brass pe 26 bar pa 0-1,5 bar Seals EPDM, polyamide Q 10 Nm³/h at pa 1,5 bar Diaphragm EPDM de W21,8x1/14LH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 700 mm H 190 mm Temperature -20 to +60 C T 160 mm M 14,0 kg with contact gauge without contact gauge acetylene Single bundle manifold acetylene Modula EB 20 K as Modula EB 10 but with Manifold regulator H 20 acetylene , flow 18 Nm 3 /h Body brass pe 26 bar pa 0-1,5 bar Seals EPDM, polyamide Q 18 Nm³/h at pa 1,5 bar Diaphragm EPDM de W21,8x1/14LH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 970 mm H 190 mm Temperature -20 to +60 C T 160 mm M 16,0 kg with contact gauge without contact gauge acetylene

22 Single cylinder- and -Single bundle manifolds Modula Single bundle manifold Modula EB 60/300 K for oxygen and other gases, Modula add-on system, consisting of: 1 high pressure-shut off valve, 1 Manifold regulator H 20 acc. to ISO 7291, adiabatic compression tested, 1 Main shut off valve, complete on stainless steel base plate Body brass pe 300 bar pa 0-20 bar Seals EPDM, polyamide Q 75 Nm³/h at pa 20 bar Diaphragm PTFE de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 420 mm H 320 mm Temperature -20 to +60 C T 110 mm M 5 kg Gas type with contact gauge without contact gauge oxygen nitrogen argon helium hydrogen compressed air Single cylinder manifold Modula EB 70/300 as EB 60/300, but with working pressure 0 40 bar Body brass pe 300 bar pa 0-40 bar Seals EPDM, polyamide Q 120 Nm³/h at pa 40 bar Diaphragm PTFE de M 24x1,5 RH da G 3/4x19 mm Leakage rate 1x10-6mbar l/s B 370 mm H 280 mm Temperature -20 to +60 C T 110 mm M 5 kg Gas type with contact gauge without contact gauge nitrogen argon helium hydrogen compressed air Single cylinder manifold Modula EB 75/300 as EB 70/300, but with working pressure 0 60 bar Single bundle manifold Modula EB 80/300 K for oxygen and other gases, Modula add-on system, consisting of: 1 high pressure-shut off valve, 1 manifold fin regulator HR 20 acc. to ISO 7291, adiabatic compression tested 1 main shut off valve complete on stainless steel base plate Body brass pe 300 bar pa 0-60 bar Seals EPDM, polyamide Q 140 Nm³/h at pa 60 bar Diaphragm PTFE de M 24x1,5 RH da G 3/4x19 mm Leakage rate 1x10-6mbar l/s B 370 mm H 280 mm Temperature -20 to +60 C T 110 mm M 5 kg Gas type with contact gauge without contact gauge nitrogen argon helium hydrogen compressed air Body brass pe 300 bar pa 0-20 bar Seals EPDM, polyamide Q 170 Nm³/h at pa 20 bar Diaphragm rubber de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 440 mm H 350 mm Temperature -20 to +60 C T 130 mm M 8 kg Gas type with contact gauge without contact gauge oxygen nitrogen argon helium hydrogen compressed air

23 Single bundle manifold Modula EB 100/300 K as EB 80 but with manifold regulator HR 40, working pressure bar adjustable Body brass pe 300 bar pa bar Seals EPDM, polyamide Q 290 Nm³/h at pa 40 bar Diaphragm rubber; with O2: V2A de M 24x1,5 RH da G 3/4x18 mm Leakage rate 1x10-6mbar l/s B 440 mm H 370 mm Temperature -20 to +60 C T 130 mm M 8,5 kg Gas type with contact gauge without contact gauge oxygen nitrogen argon helium hydrogen compressed air Single bundle manifold Modula EB 120/300 K as EB 100 but with Manifold regulator HR 60, working pressure bar adjustable, flow 450 Nm 3 /h at 60 bar Gas type with contact gauge without contact gauge oxygen nitrogen argon helium hydrogen compressed air Single cylinder manifold Modula EB 200/300 as EB 120/300, but with working pressure bar Body brass pe 300 bar pa bar Seals EPDM, polyamide Q 480 Nm³/h at pa 200 bar Diaphragm brass de M 24x1,5 RH da G 1/2 Rhi Leakage rate 1x10-6mbar l/s B 390 mm H 240 mm Temperature -20 to +60 C T 240 mm M 5,8 kg Single cylinder- and -Single bundle manifolds Modula Gas type with contact gauge without contact gauge nitrogen argon helium hydrogen compressed air Single cylinder manifold Modula EB 270/300 as EB 200/300, but with working pressure bar Body brass pe 300 bar pa bar Seals EPDM, polyamide Q 480 Nm³/h at pa 270 bar Diaphragm brass de M 24x1,5 RH da G 1/2 RHi Leakage rate 1x10-6mbar l/s B 390 mm H 240 mm Temperature -20 to +60 C T 240 mm M 5,8 kg Gas type with contact gauge without contact gauge nitrogen argon helium hydrogen compressed air

24 Cylinder and bundle hoses Vareo HP-rubber hose Vareo rubber hose to connect cylinders or bundles to rail systems or manifolds, polyamide inside and 1 brass coated steel netting, outside polyuretane, with anti kink spring, complete assembled and tested inner tube cover brading PS DN polyamide polyurethane 2x brass-coated steel 300 bar 6 mm HP-Rubber hose Vareo 200 bar connection connection to cylinder an Vareo length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm acetylene Clamp W21,8x1/14 LH inert gases W21,8x1/14 RH M24x1,5 RH nitrogen W24,32x1/14 RH M24x1,5 RH fuel gases W21,8x1/14 LH M24x1,5 RH compressed air G 5/8 RH M24x1,5 RH HP-Rubber hose Vareo 300 bar connection connection to cylinder an Vareo length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm inert gases W30x2 RH M24x1,5 RH nitrogen W30x2 RH M24x1,5 RH fuel gases W30x2 LH M24x1,5 RH compressed air W30x2 RH M24x1,5 RH HP-Stainless steel hose Vareo stainless steel hose to connect cylinders and bundles to rail systems for manifolds, inside stainless steel tube, outside netting from stainless steel wire with anti kink springs, complete welded and tested inner tube corrugated tube 316Ti braiding 1x stainless steel 304 complete welded with anti kink springs PS 300 bar DN 6 mm HP-Stainless steel hose Vareo 200 bar connection connection to cylinder an Vareo length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm oxygen G 3/4 RH M24x1,5 RH inert gases W21,8x1/14 RH M24x1,5 RH nitrogen W24,32x1/14 RH M24x1,5 RH fuel gases W21,8x1/14 LH M24x1,5 RH compressed air G 5/8 RH M24x1,5 RH HP-Stainless steel hose Vareo 300 bar connection connection to cylinder an Vareo length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm oxygen W30x2 RH M24x1,5 RH inert gases W30x2 RH M24x1,5 RH nitrogen W30x2 RH M24x1,5 RH fuel gases W30x2 LH M24x1,5 RH compressed air W30x2 RH M24x1,5 RH

25 HP-rubber hose standard rubber hose to connect cylinders or bundles to rail systems or manifolds, polyamide inside and 1 brass coated steel netting, outside polyuretane, with anti kink spring, complete assembled and tested HP-rubber hose standard 200 bar connection both sides length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm acetylene clamp x W21,8x1/14 LH inert gases W21,8x1/14 RH nitrogen W24,32x1/14 RH fuel gases W21,8x1/14 LH compressed air G 5/8 RH HP-rubber hose standard 300 bar connection both sides length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm inert gases W30x2 RH nitrogen W30x2 RH fuel gases W30x2 LH compressed air W30x2 RH Cylinder and bundle hoses standard HP-Stainless steel hose standard stainless steel hose to connect cylinders and bundles to rail systems for manifolds, inside stainless steel tube, outside netting from stainless steel wire, with anti kink springs, complete welded and tested HP-Stainless steel hose standard 200 bar connection both sides length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm oxygen G 3/4 RH inert gases W21,8x1/14 RH nitrogen W24,32x1/14 RH fuel gases W21,8x1/14 LH compressed air G 5/8 RH HP-Stainless steel hose standard 300 bar connection both sides length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm oxygen W30x2 RH inert gases W30x2 RH nitrogen W30x2 RH fuel gases W30x2 LH compressed air W30x2 RH

26 Cylinder and bundle hoses standard and Vareo HP-bundle hoses acetylene PN 25 acc. to EN 14113, DN 6, also DN 12 available connection to manifold W 21,8x1/14LH with shut off valve and adapter connection to bundle DN 6 DN mm M28 x 1,5 LH flat seat mm M28 x 1,5 LH flat seat mm M28 x 1,5 LH conical seat mm M28 x 1,5 LH conical seat with non return valve and adapter connection to bundle DN 6 DN mm M28 x 1,5 LH flat seat mm M28 x 1,5 LH flat seat mm M28 x 1,5 LH conical seat mm M28 x 1,5 LH conical seat HP-hose accessories available for every hose except for acetylene anti whip cable with 2 sheet steel angles length part of the hose- number depending on hoselength Extras for hoses Extra Part of the of the hose 90 elbow Incorporated purge valve incorporated gauge elbow and purge valve elbow and gauge purge valve and gauge elbow, purge valve and gauge

27 Tapping point regulator Vulkan E 10 single stage, with working gauge to adjust the working pressure at point of use and connection to tapping point Body brass pe 20 bar pa 0-10 bar Seals EPDM Q see below at pa 10 bar Diaphragm Perbunan de G 3/8 RH/LH da see below Leakage rate 1x10-6mbar l/s B 120 mm H 160 mm Temperature -20 to +60 C T 65 mm M 1,0 kg Gas type inlet pressure pressure flow inlet outlet oxygen 20 bar 0-10 bar 46 Nm³/h G 3/8 RH nut G 1/4 RH x 6 mm acetylene 1,5 bar 0-1,5 bar 3,5 Nm³/h G 3/8 LH nut G 3/8 LH x 9 mm /argon 20 bar 0-10 bar 46 Nm³/h G 3/8 RH nut G 1/4 RH x 6 mm Nl/min Nl/min bar 0-30 Nl/min helium 0-10 bar 46 Nm³/h nitrogen hydrogen G 3/8 LH nut G 3/8 LH x 9 mm forming gas Nl/min Nl/min Nl/min compressed air 46 Nm³/h G 3/8 RH nut G 1/4 RH x 6 mm testing gas 46 Nm³/h G 3/8 LH nut G 3/8 LH x 9 mm nitrous oxide 46 Nm³/h G 3/8 RH nut G 1/4 RH x 6 mm propane 8 bar 0-4 bar 5 kg/h G 3/8 LH nut G 3/8 LH x 9 mm bar 0-2,5 bar 2,5 kg/h ethene 0-1,5 bar 3,5 Nm³/h methane 0-1,5 bar 3,5 Nm³/h Tapping point Vulkan Tapping point regulator Vulkan E 10 F single stage with flowmeter and regulating valve for precise adjustment of a constant working flow Body brass pe 20 bar pa 1,5 bar Seals EPDM Q see below at pa 1,5 bar Diaphragm Perbunan de G 3/8 RH/LH da see below Leakage rate 1x10-6mbar l/s B 120 mm H 210 mm Temperature -20 to +60 C T 65 mm M 1,0 kg Gas type flow range pressure inlet outlet oxygen 1,4-14,5 Nl/min. 1,5 bar G 3/8 RH nut G 1/4 RH x 6 mm /argon 1,0 6,5 Nl/min. 4,0 bar ,4-14,0 Nl/min. 1,5 bar ,0-22,0 Nl/min ,6-36,0 Nl/min ,0-95,0 Nl/min. 9,0 bar helium 3,6 34,0 Nl/min. 1,5 bar , 0-65,0 Nl/min nitrogen 0,3-2,0 Nl/min ,0-42 Nl/min ,5-85,0 Nl/min. 4,0 bar hydrogen 1,8-18,0 Nl/min. 1,5 bar G 3/8 LH nut G 3/8 LH x 9 mm ,6-26 Nl/min forming gas 2,0-23,0 Nl/min Tapping point regulator Vulkan E 20 single stage, with working gauge, adjustable 0-20 bar Body brass pe 40 bar pa see below Seals EPDM, polyamide, PTFE Q see below at pa see below Diaphragm EPDM/PTFE de G 1/2 RH/LH da see below Leakage rate 1x10-6mbar l/s B 180 mm H 225 mm Temperature -20 to +60 C T 75 mm M 1,7 kg Gas type inlet pressure pressure flow inlet outlet oxygen 40 bar 0-20 bar 75 Nm³/h G 1/2 RH nut G 1/2 RH x 9 mm acetylene 1,5 bar 0-1,5 bar 5 Nm³/h G 1/2 LH nut G 1/2 LH x 9 mm /argon 40 bar 0-20 bar 75 Nm³/h G 1/2 RH nut G 1/2 RH x 9 mm helium nitrogen hydrogen G 1/2 LH nut G 1/2 LH x 9 mm forming gas compressed air G 1/2 RH nut G 1/2 RH x 9 mm propane 8 bar 0-4,0 bar 10 kg/h G 1/2 LH nut G 1/2 LH x 9 mm

28 Tapping point Vulkan Tapping point regulator Vulkan E 40 single stage, with working gauge, adjustable 0-40 bar Body brass pe 60 bar pa 0-40 bar Seals EPDM, polyamide, PTFE Q see below at pa 40 bar Diaphragm PTFE, oxygen: V2A de G 1/2 RH/LH da see below Leakage rate 1x10-6mbar l/s B 180 mm H 225 mm Temperature -20 to +60 C T 75 mm M 1,7 kg Gas type inlet pressure pressure flow inlet outlet oxygen 60 bar 40 bar 120 Nm³/h G 1/2 RH nut G 1/2 RH x 9 mm /argon helium nitrogen hydrogen G 1/2 LH nut G 1/2 LH x 9 mm forming gas compressed air G 1/2 RH nut G 1/2 RH x 9 mm Tapping point fin regulator Vulkan ER 20 single stage, with working gauge, adjustable 0-20 bar Tapping point fin regulator Vulkan ER 40 single stage, with working gauge, adjustable bar Body brass pe 100 bar pa 0-20 bar Seals polyamide, NBR Q see below at pa 20 bar Diaphragm rubber de G 1/2 RH/LH da see below Leakage rate 1x10-6mbar l/s B 240 mm H 240 mm Temperature -20 to +60 C T 100 mm M 3 kg Gas type inlet pressure pressure flow inlet outlet oxygen 100 bar 0-20 bar 160 Nm³/h G 1/2 RH nut G 1/2 RH /argon helium nitrogen hydrogen G 1/2 LH nut G 1/2 LH forming gas G 1/2 LH compressed air G 1/2 RH nut G 1/2 RH Body brass pe 100 bar pa bar Seals polyamide, NBR Q see below at pa 40 bar Diaphragm rubber, with O2:VA de G 1/2 RH/LH da see below Leakage rate 1x10-6mbar l/s B 240 mm H 330 mm Temperature -20 to +60 C T 100 mm M 3,8 kg Gas type inlet pressure pressure flow inlet outlet oxygen 100 bar bar 280 Nm³/h G 1/2 RH nut G 1/2 RH /argon helium nitrogen hydrogen G 1/2 LH nut G 1/2 LH forming gas compressed air G 1/2 RH nut G 1/2 RH Tapping point Vulkan Alu-Line 3/8 complete on aluminium profile, horizontally adjustable, with shut off valve and brazing connecting pieces for connection to piping system Ø 12 mm, connection for tapping point regulator G3/8RH or LH, PN 40, for acetylene PN 1,5 for 1 tapping point regulator oxygen acetylene fuel gases inert gas propane compressed air For 2 tapping point regulators oxygen acetylene fuel gases inert gas propane compressed air oxygen acetylene fuel gases inert gas propane compressed air

29 Tapping point Vulkan Alu-Line 1/2 ND as tapping point 3/8 with connection G 1/2 for higher flow, PN 40, for acetylene PN 1,5 For 1 tapping point regulator oxygen acetylene fuel gases inert gas propane compressed air For 2 tapping point regulators oxygen acetylene fuel gases inert gas propane compressed air oxygen acetylene fuel gases inert gas propane compressed air Tapping point Vulkan Tapping point Vulkan Alu Line 1/2 MD as tapping point 1/2 ND with connection G 1/2 for higher pressure, PN 100, for acetylene PN 1,5 For 1 tapping point regulator oxygen acetylene fuel gases inert gas propane compressed air For 2 tapping point regulators oxygen acetylene fuel gases inert gas propane compressed air oxygen fuel gases inert gas compressed air Tapping point Vulkan Alu Line 1/2 GU as tapping point 1/2 ND with connection G 1/2 for higher pressure, PN 40, but with outlet downwards for e.g. LH40 or LH25 For 1 tapping point regulator oxygen acetylene fuel gases inert gas propane compressed air For 2 tapping point regulators oxygen acetylene fuel gases inert gas propane compressed air oxygen acetylene fuel gases inert gas propane compressed air Shipyard tapping point Vulkan Alu-Line ST 3/8 complete on aluminium bar, distance between each outlet 85 mm, with distributing pipe and block ball valve, one inlet with shut off valves for each outlet, for fuel gases, inert gases, and oxygen for up to 10 tapping point regulators, inlet with 2 connections G 1/2RH, with more than 2 connections G3/4RH, outlets G 3/8RH or LH, PN 40, for acetylene PN 1,5 quantity connections oxygen acetylene fuel gases inert gas propane compressed air Shipyard tapping point Vulkan Alu-Line ST 1/2 as shipyard tapping point Alu-Line St 3/8 but outlets G 1/2RH/LHak and inlets G 3/4RHi, interval 120 mm quantity connections oxygen acetylene fuel gases inert gas propane compressed air

30 Manifold regulator Vulkan acc. to ISO 7291 Manifold regulator Vulkan HA 5 acetylene acc. to ISO 7291 Hauptdruckminderer Vulkan HA 10 acetylene nach ISO 7291 Body brass pe 26 bar pa 0-1,5 bar Seals EPDM Q 5 Nm³/h at pa 1,5 bar Diaphragm EPDM de G 3/4 LH nut da G 1/2 RHak Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg inlet pressure inlet outlet acetylene 26 bar G 3/4 LH G 1/2 RH Body brass pe 26 bar pa 0-1,5 bar Seals EPDM Q 10 Nm³/h at pa 1,5 bar Diaphragm EPDM de G 3/4 LH nut da G 1/2 RHak Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg inlet pressure inlet outlet acetylene 26 bar G 3/4 LH G 1/2 RH Manifold regulator Vulkan H 20 acetylene Effect with high pressure compensation for a constant working pressure, acc. to ISO 7291, for high flow and high pressure especially suitable for flame cutting machines Body brass pe 26 bar pa 0-1,5 bar Seals EPDM Q 18 Nm³/h at pa 1,5 bar Diaphragm EPDM de G 3/4 LH nut da G 1/2 RHak Leakage rate 1x10-6mbar l/s B 250 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,7 kg inlet pressure inlet outlet acetylene 26 bar G 3/4 LH G 1/2 RH Manifold regulator Vulkan HA 40 acetylene acc. to ISO 7291 Manifold regulator Vulkan H 20/300 Effect for manifolds or direct connection to a bundle, acc. to ISO 7291, adiabatic compression tested Body brass pe 26 bar pa 0-1,5 bar Seals EPDM Q 40 Nm³/h at pa 1,5 bar Diaphragm EPDM de 16 mm da 22 mm Leakage rate 1x10-6mbar l/s B 195 mm H 275 mm Temperature -20 to +60 C T 135 mm M 5,5 kg inlet pressure inlet outlet acetylene 26 bar 16 mm 22 mm Body brass pe 200/300 bar pa 0-20 bar Seals EPDM, polyamide, PTFE Q 75 Nm³/h at pa 20 bar Diaphragm PTFE de see below da see below Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,7 kg inlet pressure inlet outlet oxygen 200 bar G 3/4 RH nut G1/2RH /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut compressed air G 5/8 RH ÜS oxygen 300 bar W30x2 RH nut G1/2RH /argon helium nitrogen hydrogen W30x2 LH nut compressed air W30x2 RH nut

31 Manifold regulator Vulkan H 40/300 Effect for manifolds or direct connection to a bundle, acc. to ISO 7291, adiabatic compression tested Body brass pe 200/300 bar pa 0 40 bar Seals EPDM, polyamide, PTFE Q 120 Nm³/h at pa 40 bar Diaphragm with O 2, V2A, PTFE de see below da see below Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,7 kg inlet pressure inlet outlet oxygen 200 bar G 3/4 RH nut G1/2RH /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut compressed air G 5/8 RH ÜS oxygen 300 bar W30x2 RH nut G1/2RH /argon helium nitrogen hydrogen W30x2 LH nut compressed air W30x2 RH nut Manifold regulator Vulkan H 60/300 Effect for manifolds or direct connection to a bundle, acc. to ISO 7291, adiabatic compression tested Body brass pe 200/300 bar pa 0 60 bar Seals EPDM, polyamide, PTFE Q 140 Nm³/h at pa 60 bar Diaphragm with O 2, V2A, PTFE de see below da see below Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,7 kg Manifold regulator Vulkan acc. to ISO 7291 inlet pressure inlet outlet oxygen 200 bar G 3/4 RH nut G1/2RH /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut compressed air G 5/8 RH ÜS oxygen 300 bar W30x2 RH nut G1/2RH /argon helium nitrogen hydrogen W30x2 LH nut compressed air W30x2 RH nut Manifold fin regulator Vulkan HR 10/300 for manifolds or direct connection to a bundle, acc. to ISO 7291, adiabatic compression tested Body brass pe 200/300 bar pa 0 10 bar Seals polyamide, NBR Q 90 Nm³/h at pa 10 bar Diaphragm rubber de see below da see below Leakage rate 1x10-6mbar l/s B 240 mm H 240 mm Temperature -20 to +60 C T 85 mm M 3,0 kg inlet pressure inlet outlet oxygen 200 bar G 3/4 RH nut G1/2RH /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut compressed air G 5/8 RH ÜS oxygen 300 bar W30x2 RH nut G1/2RH /argon helium nitrogen hydrogen W30x2 LH nut compressed air W30x2 RH nut

32 Manifold regulator Vulkan acc. to ISO 7291 Manifold fin regulator Vulkan HR 20/300 for manifolds or direct connection to a bundle, acc. to ISO 7291, adiabatic compression tested Manifold fin regulator Vulkan HR 40/300 for manifolds or direct connection to a bundle, acc. to ISO 7291, adiabatic compression tested Body brass pe 200/300 bar pa 0-20 bar Seals polyamide, NBR Q 170 Nm³/h at pa 20 bar Diaphragm rubber de see below da see below Leakage rate 1x10-6mbar l/s B 240 mm H 240 mm Temperature -20 to +60 C T 85 mm M 3,0 kg inlet pressure inlet outlet oxygen 200 bar G 3/4 RH nut G1/2RH /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut compressed air G 5/8 RH ÜS oxygen 300 bar W30x2 RH nut G1/2RH /argon helium nitrogen hydrogen W30x2 LH nut compressed air W30x2 RH nut Body brass pe 200/300 bar pa bar Seals polyamide, NBR Q 290 Nm³/h at pa 40 bar Diaphragm rubber, with O2:VA de see below da see below Leakage rate 1x10-6mbar l/s B 240 mm H 330 mm Temperature -20 to +60 C T 85 mm M 3,8 kg inlet pressure inlet outlet oxygen 200 bar G 3/4 RH nut G1/2RH /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut compressed air G 5/8 RH ÜS oxygen 300 bar W30x2 RH nut G1/2RH /argon helium nitrogen hydrogen W30x2 LH nut compressed air W30x2 RH nut Manifold fin regulator Vulkan HR 60/300 for manifolds or direct connection to a bundle, acc. to ISO 7291, adiabatic compression tested Body brass pe 200/300 bar pa bar Seals polyamide, NBR Q 450 Nm³/h at pa 60 bar Diaphragm rubber, with O2:VA de see below da see below Leakage rate 1x10-6mbar l/s B 240 mm H 330 mm Temperature -20 to +60 C T 85 mm M 3,8 kg inlet pressure inlet outlet oxygen 200 bar G 3/4 RH nut G1/2RH /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut compressed air G 5/8 RH ÜS oxygen 300 bar W30x2 RH nut G1/2RH /argon helium nitrogen hydrogen W30x2 LH nut compressed air W30x2 RH nut

33 Manifold and in-line regulator Vulkan LHR 300/200 BSP single stage, with safety gauges acc. to ISO 5171, in 3 working pressure steps, 270 bar, 200 bar und 100 bar, outlet G 1/2RHak Body brass pe see below pa see below Seals EPDM Q 480 Nm³/h at pa see below Diaphragm EPDM de DIN 477 RH/LH da G 1/2 Rhak Leakage rate 1x10-6mbar l/s B 150 mm H 210 mm Temperature -20 to +60 C T 120 mm M 1,2 kg outlet pressure inlet pressure 200 bar inlet pressure 300 bar /argon 270 bar helium 270 bar nitrogen 270 bar hydrogen 270 bar compressed air 270 bar oxygen 200 bar /argon 200 bar helium 200 bar nitrogen 200 bar hydrogen 200 bar compressed air 200 bar oxygen 100 bar /argon 100 bar helium 100 bar nitrogen 100 bar hydrogen 100 bar compressed air 100 bar Manifold regulator Vulkan acc. to ISO 7291 Manifold and in-line regulator Vulkan LHR 300/200 DIN single stage, with safety gauges acc. to ISO 5171, in 3 working pressure steps, 270 bar, 200 bar und 100 bar, outlet acc. to DIN Body brass pe see below pa see below Seals EPDM Q 480 Nm³/h at pa see below Diaphragm EPDM de DIN 477 RH/LH da DIN 477 RH/LH Leakage rate 1x10-6mbar l/s B 150 mm H 210 mm Temperature -20 to +60 C T 120 mm M 1,2 kg outlet outlet pressure inlet pressure 200 bar inlet pressure 300 bar oxygen G 3/4RHaf 200 bar /argon W21,8x1/14RHaf 200 bar helium W21,8x1/14RHaf 200 bar nitrogen W24,32x1/14RHaf 200 bar hydrogen W21,8x1/14LHaf 200 bar compress. air G 5/8RHif 200 bar oxygen G 3/4RHaf 100 bar /argon W21,8x1/14RHaf 100 bar helium W21,8x1/14RHaf 100 bar nitrogen W24,32x1/14RHaf 100 bar hydrogen W21,8x1/14LHaf 100 bar compress. air G 5/8RHif 100 bar

34 Manifold regulator Vulkan acc. to ISO 7291 Manifold regulator Vulkan H 20 for AM 35 / AM 35H exchange regulator for Automatic manifolds AM 35, 35 K, 35 KM, 35 H, 35 KH and 35 KHM, without contact gauge, in case of order please indicate serial no. of manifold Body brass pe 200/300 bar pa see below Seals EPDM, polyamide, PTFE Q 75 Nm³/h at pa 20 bar Diaphragm PTFE de M 24x1,5 RHak da G 1/2RHk nut Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg inlet pressure outlet pressure outlet pressure outlet pressure outlet pressure 14 bar left side 14 bar right side 20 bar left side 20 bar right side oxygen 200 bar /argon helium nitrogen hydrogen compressed air oxygen 300 bar /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan AD 35 (2.stage) exchange regulator for Automatic manifold AM 35, AM 35 K and AM 35 KM inlet pressure outlet pressure oxygen 20 bar 0-10 bar /argon helium nitrogen hydrogen compressed air Manifold regulator Vulkan H40 for AM 40 exchange regulator for Automatic manifolds AM 35, 35 K, 35 KM, 35 H, 35 KH and 35 KHM, without contact gauge, in case of order please indicate serial no. of manifold Body brass pe 200/300 bar pa see below Seals EPDM, polyamide, PTFE Q 120 Nm³/h at pa 40 bar Diaphragm PTFE de M 24x1,5 RHak da G 1/2RHk nut Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg inlet pressure left side right side oxygen 200 bar /argon helium nitrogen hydrogen compressed air oxygen 300 bar /argon helium nitrogen hydrogen compressed air

35 Manifold fin regulator Vulkan HR 20 for AM 45 exchange regulator for Automatic manifolds AM 45, 45 K and 45 KM, without contact gauge, in case of order please indicate serial no. of manifold inlet pressure outlet pressure linke Seite rechte Seite oxygen 200 bar 20 bar /argon helium nitrogen hydrogen compressed air oxygen 300 bar 20 bar /argon helium nitrogen hydrogen compressed air Manifold fin regulator Vulkan HR 40 for AM 55 exchange regulator for Automatic manifolds AM 55, 55 K and 55 KM, without contact gauge, in case of order please indicate serial no. of manifold inlet pressure outlet pressure left side right side oxygen 200 bar 28 bar /argon helium nitrogen hydrogen compressed air oxygen 300 bar 28 bar /argon helium nitrogen hydrogen compressed air Manifold regulator Vulkan acc. to ISO 7291 Manifold regulator Vulkan H 10 for SE 10 exchange regulator for Single cylinder manifold SE 10, in case of order please indicate serial no. of manifold inlet pressure outlet pressure oxygen 300 bar 0-10 bar /argon helium nitrogen hydrogen compressed air Manifold regulator BS 60, SE 20 and EB 60 exchange regulator for Single cylinder manifold BS 60, SE 20 and EB 60 in case of order please indicate serial no. of manifold inlet pressure outlet pressure oxygen 300 bar 0 20 bar /argon helium nitrogen hydrogen compressed air

36 Manifold regulator Vulkan acc. to ISO 7291 Manifold fin regulator BS 80 and EB 80 exchange regulator for Automatic manifolds BS 80 and EB 80, without contact gauge, in case of order please indicate serial no. of manifold inlet pressure outlet pressure oxygen 300 bar 0 20 bar /argon helium nitrogen hydrogen compressed air Manifold fin regulator BS 100 and EB 100 exchange regulator for Automatic manifolds BS 100 and EB 100, without contact gauge, in case of order please indicate serial no. of manifold inlet pressure outlet pressure oxygen 300 bar bar /argon helium nitrogen hydrogen compressed air Manifold fin regulator BS 120 and EB 120 exchange regulator for Automatic manifolds BS 120 and EB 120, without contact gauge, in case of order please indicate serial no. of manifold inlet pressure outlet pressure oxygen 300 bar bar /argon helium nitrogen hydrogen compressed air

37 In-line regulator Vulkan LA 10 acetylene single stage, with safety gauges acc. to ISO 5171 In-line regulator Vulkan L 10 propane single stage, with safety gauges acc. to ISO 5171 Body brass pe 1,5 bar pa 0-1,3 bar Seals EPDM Q 8 Nm³/h at pa 1,3 bar Diaphragm EPDM de G 1/2 RH da G 1/2 RH Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg acetylene Body brass pe 6 bar pa 0-4 bar Seals EPDM Q 15 Nm³/h at pa 4 bar Diaphragm EPDM de G 1/2 RH da G 1/2 RH Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg In-line regulator Vulkan In-line regulator Vulkan L 10 single stage, with safety gauges acc. to ISO 5171 In-line regulator Vulkan L 20 single stage, with safety gauges acc. to ISO 5171 In-line regulator Vulkan L 40 single stage, with safety gauges acc. to ISO 5171 Body brass pe 20 bar pa 0-10 bar Seals EPDM Q 45 Nm³/h at pa 10 bar Diaphragm EPDM de G 1/2 RH da G 1/2 RH Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg Body brass pe 40 bar pa 0-20 bar Seals EPDM Q 70 Nm³/h at pa 20 bar Diaphragm PTFE de G 1/2 RH da G 1/2 RH Leakage rate 1x10-6mbar l/s B 200 mm H 200 mm Temperature -20 to +60 C T 75 mm M 1,9 kg propane oxygen /argon helium nitrogen hydrogen compressed air oxygen /argon helium nitrogen hydrogen compressed air acetylene pe 1,5 bar, pa 0-1,3 bar, flow12 Nm³/h Body brass pe 100 bar pa 0-40 bar Seals EPDM Q 90 Nm³/h at pa 40 bar Diaphragm PTFE; with O2 aus V2A de G 1/2 RH da G 1/2 RH Leakage rate 1x10-6mbar l/s B 200 mm H 200 mm Temperature -20 to +60 C T 75 mm M 1,9 kg oxygen /argon helium nitrogen hydrogen compressed air

38 In-line regulator Vulkan In-line regulator Vulkan LR 20 single stage, with safety gauges acc. to ISO 5171 Body brass pe 40 bar pa 0-20 bar Seals polyamide Q 160 Nm³/h at pa 20 bar Diaphragm rubber de G 3/4 RH da G 3/4 RH Leakage rate 1x10-6mbar l/s B 240 mm H 240 mm Temperature -20 to +60 C T 85 mm M 3 kg oxygen /argon helium nitrogen hydrogen compressed air propane, pe 6 bar, pa 0-4 bar, flow 25 Nm³/h In-line regulator Vulkan LR 40 single stage, with safety gauges acc. to ISO 5171 Body brass pe 100 bar pa bar Seals polyamide Q 280 Nm³/h at pa 40 bar Diaphragm rubber, with O2 VA de G 3/4 RH da G 3/4 RH Leakage rate 1x10-6mbar l/s B 240 mm H 330 mm Temperature -20 to +60 C T 85 mm M 3,8 kg oxygen /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan LR 60 single stage, with safety gauges acc. to ISO 5171 Body brass pe 100 bar pa bar Seals polyamide Q 370 Nm³/h at pa 60 bar Diaphragm rubber, with O2 VA de G 3/4 RH da G 3/4 RH Leakage rate 1x10-6mbar l/s B 240 mm H 330 mm Temperature -20 to +60 C T 85 mm M 3,8 kg oxygen /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan L 15/2 double stage, with safety gauges acc. to ISO 5171 Body brass pe 20 bar pa 0-1,5 bar Seals polyamide Q 5 Nm³/h at pa 1,5 bar Diaphragm EPDM de G 1/2 RH da G 1/2 RH Leakage rate 1x10-6mbar l/s B 220 mm H 190 mm Temperature -20 to +60 C T 75 mm M 2,0 kg 38 oxygen /argon helium nitrogen hydrogen compressed air

39 In-line regulator Vulkan LH 40 single stage, with safety gauge acc. to ISO 5171, for high flow and high performance Body brass pe 40 bar pa see below Seals Perbunan Q see below at pa see below Diaphragm NBR de G 1/2 RH da G 1/2 RH Leakage rate 1x10-3mbar l/s B 90 mm H 180 mm Temperature -20 to +60 C T 90 mm M 1,3 kg outlet pressure flow oxygen 0,2 4 bar 30 Nm³/h /argon helium nitrogen hydrogen compressed air oxygen 0,2 10 bar 105 Nm³/h /argon helium nitrogen hydrogen compressed air oxygen 0,2 20 bar 170 Nm³/h /argon helium nitrogen hydrogen compressed air oxygen 0,2 35 bar 230 Nm³/h /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan In-line regulator Vulkan LH 25 single stage, with safety gauge acc. to ISO 5171 Body brass pe 40 bar pa 0-25 bar Seals NBR Q 300 Nm³/h at pa 25 bar Diaphragm NBR de G 1 da G 1 Leakage rate 1x10-3mbar l/s B 200 mm H 210 mm Temperature -20 to +60 C T 120 mm M 3,6 kg oxygen /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan LH 25/10 single stage, with safety gauge acc. to ISO 5171, like LH 25, but owrking pressure adjustable 0-10 bar Body brass pe 40 bar pa 0-10 bar Seals NBR Q 180 Nm³/h at pa 10 bar Diaphragm NBR de G 1 RH da G 1 RH Leakage rate 1x10-3mbar l/s B 200 mm H 240 mm Temperature -20 to +60 C T 145 mm M 3,6 kg oxygen /argon helium nitrogen hydrogen compressed air

40 In-line regulator Vulkan In-line regulator Vulkan LD 1 MD single stage with dome, optional also with pilot regulator available Body brass pe 100 bar pa to 99 bar Seals EPDM/Viton Q Nm³/h at pa 99 bar Diaphragm EPDM de G 1 RH da G 1 RH Leakage rate 1x10-6mbar l/s B 130 mm H 170 mm Temperature -20 to +60 C T 130 mm M 11,5 kg oxygen 40 bar inlet pressure, to 39 bar working pressure /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan LD 1 ND single stage with dome, optional also with pilot regulator available Body brass pe 25 bar pa to 24 bar Seals EPDM/Viton Q 280 Nm³/h at pa 24 bar Diaphragm EPDM de G 1 RH da G 1 RH Leakage rate 1x10-6mbar l/s B 130 mm H 170 mm Temperature -20 to +60 C T 130 mm M 11,5 kg oxygen /argon helium nitrogen hydrogen compressed air In-line Dome regulator unit LDS1 with dome regulator and pilote regulator and alternatively with in- and outlet gauge; complete assembled Body brass pe see below pa see below Seals EPDM/Viton Q see below at pa see below Diaphragm EPDM de G 1 RH da G 1 RH Leakage rate 1x10-6mbar l/s B 200 mm H 400 mm Temperature -20 to +60 C T 200 mm M 13,5 kg 40 with pilote regulator with pilote regulator with pilote regulator and. and outlet gauge in- and outlet gauge inlet pressure outlet pressure flow oxygen 25 bar 0,5 16 bar Nm³/h inert gas CO helium hydrogen nitrogen compr. air oxygen 40 bar 0,5 25 bar Nm³/h inert gas CO helium hydrogen nitrogen compr. air oxygen 40 bar 0,5 39 bar Nm³/h inert gas 50 bar 0,5 49 bar Nm³/h CO2 40 bar 0,5 39 bar Nm³/h helium 50 bar 0,5 49 bar Nm³/h hydrogen nitrogen compr. air

41 Precision-In-line regulator Vulkan LP single stage, with safety gauge Body aluminium, zinc diecasting pe 21 bar pa 0,01-0,6 bar Seals NBR Q 45 Nm³/h at pa 0,6 bar Diaphragm NBR de G 3/8 RH da G 3/8 RH Leakage rate 1x10-6mbar l/s B 108 mm H 162 mm Temperature -20 to +60 C T 108 mm M 2,0 kg oxygen /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan Precision-In-line regulator Vulkan LP single stage, with safety gauge Body aluminium, zinc diecasting pe 21 bar pa 0,01-1,6 bar Seals NBR Q 50 Nm³/h at pa 1,6 bar Diaphragm NBR de G 3/8 RH da G 3/8 RH Leakage rate 1x10-6mbar l/s B 108 mm H 162 mm Temperature -20 to +60 C T 108 mm M 2,0 kg oxygen /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan LH single stage, with safety gauge Body zinc die cast/brass pe 21 bar pa 0,2 1,8 bar Seals NBR Q 150 Nm³/h at pa 1,8 bar Diaphragm NBR de G ½ RH da G ½ RH Leakage rate 1x10-6mbar l/s B 90 mm H 175 mm Temperature -20 to +60 C T 90 mm M 1,6 kg oxygen. 10 bar inlet pressure /argon helium nitrogen hydrogen compressed air

42 In-line regulator Vulkan In-line regulator Vulkan LHR 1/45 single stage Body Aluminium pe 6 bar pa 5-45 mbar Seals NBR Q 7 Nm³/h at pa 45m bar Diaphragm PTFE de G 1/2 RH da G 3/4 RH Leakage rate 1x10-6mbar l/s B 160 mm H 180 mm Temperature -20 to +60 C T 160 mm M 2,0 kg oxygen /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan LHR 1/200 single stage Body Aluminium pe 6 bar pa mbar Seals NBR Q 35 Nm³/h at pa 200m bar Diaphragm PTFE de G 1/2 RH da G 3/4 RH Leakage rate 1x10-6mbar l/s B 160 mm H 180 mm Temperature -20 to +60 C T 160 mm M 2,0 kg oxygen /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan LHR 1/700 single stage Body Aluminium pe 6 bar pa mbar Seals NBR Q 60 Nm³/h at pa 700m bar Diaphragm PTFE de G 1/2 RH da G 3/4 RH Leakage rate 1x10-6mbar l/s B 160 mm H 180 mm Temperature -20 to +60 C T 160 mm M 2,0 kg oxygen /argon helium nitrogen hydrogen compressed air

43 Vulkan Effect with high pressure compensation for constant working pressure at all working conditions Without high pressure compensation As the cylinder pressure decreases, the working pressure increases. The consumption of gas will increase with 300 bar up to more than 50 % With high pressure compensation As the cylinder pressure decreases, the working pressure will remain constant and so does your gas consumption you realise significant gas savings! 300 bar gas cylinders intensify enormously the effect of increase of working pressure, while the cylinder pressure is decreasing. It is even more important to use a pressure regulator with high pressure compensation than with 200 bar gas cylinders. Therefore all pressure regulators Vulkan have the integrated high pressure compensation Effect to provide you an optimal working performance and safety. Pressure regulator Vulkan F 10/300 Effect single stage, acc. to ISO 2503, for oxygen and acetylene BAM-approved Body brass pe 200/300 bar pa 0-10 bar Seals polyamide, EPDM Q see below at pa see below Diaphragm EPDM de see below da see below Leakage rate 1x10-6mbar l/s B 210 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg inlet pressure pressure flow inlet outlet art.-no. oxygen 200 bar 0-10 bar 46 Nm³/h G3/4RH nut G 1/4 RH x 6 mm acetylene 20 bar 0-1,5 bar 3,5 Nm³/h clamp G 3/8 LH x 9 mm /argon 200 bar 0-10 bar 46 Nm³/h W21,8x1/14RH nut G 1/4 RH x 6 mm helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut G 3/8 LH x 9 mm forming gas Nl/min. 1,8 Nm³/h Nl/min. 3,0 Nm³/h compressed air 0-10 bar 46 Nm³/h G 5/8 RH G 1/4 RH x 6 mm testing gas M19x1,5LH nut G 3/8 LH x 9 mm nitrous oxide 80 bar G 3/8 RH nut G 1/4 RH x 6 mm methane 200 bar W21,8x1/14LH nut G 3/8 LH x 9 mm oxygen 300 bar 0-10 bar 46 Nm³/h W 30x2RH nut G 1/4 RH x 6 mm /argon Nl/min. 1,2 Nm³/h Nl/min. 1,8 Nm³/h helium 0-10 bar 46 Nm³/h nitrogen 0-10 bar hydrogen W 30x2LH nut G 3/8 LH x 9 mm forming gas Nl/min. 1,8 Nm³/h Nl/min. 3,0 Nm³/h compressed air 0-10 bar 46 Nm³/h W 30x2RH nut G 1/4 RH x 6 mm testing gas W 30x2LH nut G 3/8 LH x 9 mm Pressure regulator Vulkan acc. to ISO 2503 Pressure regulator Vulkan F10/200 standard single stage, acc. to ISO 2503, but without high pressure compensation, for oxygen BAM-approved inlet pressure pressure flow inlet outlet art.-no. oxygen 200 bar 0-10 bar 46 Nm³/h G3/4RH nut G 1/4 RH x 6 mm /argon 200 bar W21,8x1/14RH nut Nl/min. 1,2 Nm³/h Nl/min. 1,8 Nm³/h helium 0-10 bar 46 Nm³/h nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut G 3/8 LH x 9 mm forming gas Nl/min. 1,8 Nm³/h Nl/min. 3,0 Nm³/h compressed air 0-10 bar 46 Nm³/h G 5/8 RH G 1/4 RH x 6 mm testing gas M19x1,5LH Üm G 3/8 LH x 9 mm nitrous oxide 80 bar G 3/8 RH nut G 1/4 RH x 6 mm propane 8 bar 0-4 bar 5 kg/h W21,8x1/14LH nut G 3/8 LH x 9 mm ethene 80 bar 0-1,5 bar 3,5 Nm³/h methane 200 bar 0-10 bar 46 Nm³/h

44 Pressure regulator Vulkan acc. to ISO 2503 Pressure regulator Vulkan F 20/300 Effect single stage, acc. to ISO 2503, working pressure adjustable to 20 bar Body brass pe 200/300 bar pa 0-20 bar Seals EPDM, polyamide Q 75 Nm³/h at pa 20 bar Diaphragm PTFE de see below da see below Leakage rate 1x10-6mbar l/s B 210 mm H 210 mm Temperature -20 to +60 C T 75 mm M 1,9 kg inlet pressure pressure inlet outlet art.-no. oxygen 200 bar 0-20 bar G3/4RH nut G 1/4 RH x 6 mm /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH hydrogen W21,8x1/14LH G 3/8 LH x 9 mm forming gas compressed air G 5/8 RH G 1/4 RH x 6 mm testing gas M19x1,5LH G 3/8 LH x 9 mm methane W21,8x1/14LH oxygen 300 bar 0-20 bar W 30x2RH nut G 1/4 RH x 6 mm /argon helium nitrogen hydrogen W 30x2LH nut G 3/8 LH x 9 mm forming gas compressed air W 30x2RH nut G 1/4 RH x 6 mm testing gas W 30x2LH nut G 3/8 LH x 9 mm Pressure regulator Vulkan F 40/300 Effect flow up to 120 Nm 3 /h as Pressure regulator Vulkan F20 Effect, but working pressure adjustable to 40 bar inlet pressure pressure inlet outlet art.-no. /argon 200 bar 0-40 bar W21,8x1/14RH nut G 1/4 RH x 6 mm helium nitrogen W24,32x1/14RH hydrogen W21,8x1/14LH G 3/8 LH x 9 mm forming gas compressed air G 5/8 RH G 1/4 RH x 6 mm testing gas M19x1,5LH G 3/8 LH x 9 mm methane W21,8x1/14LH /argon 300 bar 0-40 bar W30x2RH nut G 1/4 RH x 6 mm helium nitrogen hydrogen W30x2LH nut G 3/8 LH x 9 mm forming gas compressed air W30x2RH nut G 1/4 RH x 6 mm testing gas W30x2LH nut G 3/8 LH x 9 mm Pressure regulator Vulkan F 60/300 Effect flow up to 140 Nm 3 /h as Pressure regulator Vulkan F20 Effect, but working pressure adjustable to 60 bar and without shut off valve inlet pressure pressure inlet outlet art.-no. /argon 200 bar 0 60 bar W21,8x1/14RH nut G 1/4 RH helium nitrogen W24,32x1/14RH hydrogen W21,8x1/14LH G 3/8 LH forming gas compressed air G 5/8 RH G 1/4 RH testing gas M19x1,5LH G 3/8 LH methane W21,8x1/14LH /argon 300 bar 0 60 bar W30x2RH nut G 1/4 RH helium nitrogen hydrogen W30x2LH nut G 3/8 LH forming gas compressed air W30x2RH nut G 1/4 RH testing gas W30x2LH nut G 3/8 LH

45 Pressure regulator Vulkan F 15/300 Effect single stage, acc. to ISO 2503, working pressure adjustable 0-1,5 bar Body brass pe 200/300 bar pa 0-1,5 bar Seals EPDM Q to 8 Nm³/h bei pa 1,5 bar Diaphragm EPDM de see below da see below Leakage rate 1x10-6mbar l/s B 210 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg inlet pressure pressure inlet outlet art.-no. /argon 200 bar 0-1,5 bar W21,8x1/14RH nut G 1/4 RH x 6 mm helium nitrogen W24,32x1/14RH hydrogen W21,8x1/14LH G 3/8 LH x 9 mm forming gas compressed air G 5/8 RH G 1/4 RH x 6 mm testing gas M19x1,5LH G 3/8 LH x 9 mm methane W21,8x1/14LH /argon 300 bar 0-1,5 bar W30x2RH nut G 1/4 RH x 6 mm helium nitrogen hydrogen W30x2LH nut G 3/8 LH x 9 mm forming gas compressed air W30x2RH nut G 1/4 RH x 6 mm testing gas W30x2LH nut G 3/8 LH x 9 mm Pressure regulator Vulkan acc. to ISO 2503 Pressure regulator Vulkan F 10/300 F Effect with Flowmeter single stage, acc. to ISO 2503, with high pressure compensation Effect for constant working pressure at all working conditions, he flowmeter enables the adjustment of a certain flow at constant working pressure Body brass pe 200/300 bar pa see below Seals polyamide, EPDM Q see below bei pa see below Diaphragm EPDM de see below da see below Leakage rate 1x10-6mbar l/s B 210 mm H 230 mm Temperature -20 to +60 C T 75 mm M 1,5 kg inlet 200 bar pressure inlet outlet art.-no. flow range /argon 0,9-5,0 Nl/min. 4,0 bar W21,8x1/14RH nut G 1/4 RH x 6 mm ,0-14,0 Nl/min. 1,5 bar ,5-23,0 Nl/min ,0-32,0 Nl/min ,0-95,0 Nl/min. 9 bar helium 3,0-34,0 Nl/min. 1,5 bar , 0-60,0 Nl/min nitrogen 0,3-2,0 Nl/min. W24,32x1/14RH ,0-42 Nl/min. 1,5 bar ,0-80,0 Nl/min. 4,0 bar hydrogen 1,7-17,0 Nl/min. 1,5 bar W21,8x1/14LH G 3/8 LH x 9 mm ,6-26 Nl/min forming gas 2,0-23,0 Nl/min inlet 300 bar pressure inlet outlet art.-no. flow range /argon 0,9-5,0 Nl/min. 4,0 bar W 30x2RH nut G 1/4 RH x 6 mm ,0-14,0 Nl/min. 1,5 bar ,5-23,0 Nl/min ,0-32,0 Nl/min ,0-95,0 Nl/min. 9 bar helium 3,0-34,0 Nl/min. 1,5 bar , 0-60,0 Nl/min nitrogen 0,3-2,0 Nl/min ,0-42 Nl/min. 1,5 bar ,0-80,0 Nl/min. 4,0 bar hydrogen 1,7-17,0 Nl/min. 1,5 bar W 30x2LH nut G 3/8 LH x 9 mm ,6-26 Nl/min forming gas 2,0-23,0 Nl/min

46 Pressure regulator Vulkan acc. to ISO 2503 Pressure regulator Vulkan F 15/300 2F Effect with 2 flow meters as Pressure regulator Vulkan F 10/300 F Effect with Flowmeter but with 2 flowmeters for two independent working processes Body brass pe 200/300 bar pa see below Seals polyamide, EPDM Q see below bei pa see below Diaphragm EPDM de see below da see below Leakage rate 1x10-6mbar l/s B 250 mm H 230 mm Temperature -20 to +60 C T 130 mm M 2,0 kg inlet 200 bar pressure inlet outlet art.-no. flow range 2 x CO2/Argon 1,0 6,5 Nl/min. 4,0 bar W21,8x1/14RH nut G 1/4 RH x 6 mm ,4-14,0 Nl/min. 1,5 bar ,0-22,0 Nl/min ,6-36,0 Nl/min ,0-95,0 Nl/min. 9,0 bar helium 3,6 34,0 Nl/min. 1,5 bar , 0-65,0 Nl/min nitrogen 0,3-2,0 Nl/min. W24,32x1/14RH ,0-42 Nl/min ,5-85,0 Nl/min. 4,0 bar hydrogen 1,8-18,0 Nl/min. 1,5 bar W21,8x1/14LH G 3/8 LH x 9 mm ,6-26 Nl/min forming gas 2,0-23,0 Nl/min inlet 300 bar pressure inlet outlet art.-no. flow range 2 x / argon 1,0 6,5 Nl/min. 4,0 bar W 30x2RH nut G 1/4 RH x 6 mm ,4-14,0 Nl/min. 1,5 bar ,0-22,0 Nl/min ,6-36,0 Nl/min ,0-95,0 Nl/min. 9,0 bar helium 3,6 34,0 Nl/min. 1,5 bar , 0-65,0 Nl/min nitrogen 0,3-2,0 Nl/min ,0-42 Nl/min ,5-85,0 Nl/min. 4,0 bar hydrogen 1,8-18,0 Nl/min. 1,5 bar W 30x2LH nut G 3/8 LH x 9 mm ,6-26 Nl/min forming gas 2,0-23,0 Nl/min Pressure regulator Vulkan F 10/2 300 Effect double stage, acc. to ISO 2503, working pressure adjustable 0-10 bar Body brass pe 200/300 bar pa 0-10 bar Seals EPDM, polyamide Q 48 Nm³/h bei pa 10 bar Diaphragm EPDM de see below da see below Leakage rate 1x10-6mbar l/s B 240 mm H 190 mm Temperature -20 to +60 C T 75 mm M 2,0 kg inlet pressure pressure inlet outlet art.-no. oxygen 200 bar 0-10 bar G3/4RH nut G 1/4 RH x 6 mm /argon 200 bar W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut G 3/8 LH x 9 mm forming gas compressed air G 5/8 RH G 1/4 RH x 6 mm testing gas M19x1,5LH nut G 3/8 LH x 9 mm oxygen 300 bar 0-10 bar W30x2RH nut G 1/4 RH x 6 mm /argon helium nitrogen hydrogen W30x2LH nut G 3/8 LH x 9 mm forming gas compressed air W30x2RH nut G 1/4 RH x 6 mm testing gas W30x2LH nut G 3/8 LH x 9 mm

47 Pressure regulator Vulkan F 15/2 300 Effect as Pressure regulator Vulkan F 10/2 300 Effect but working pressure adjustable 0-1,5 bar Body brass pe 200/300 bar pa 0 1,5 bar Seals EPDM, polyamide Q 8 Nm³/h bei pa 1,5 bar Diaphragm EPDM de see below da see below Leakage rate 1x10-6mbar l/s B 240 mm H 190 mm Temperature -20 to +60 C T 75 mm M 2,0 kg inlet pressure pressure inlet outlet art.-no. oxygen 200 bar 0 1,5 bar G3/4RH nut G 1/4 RH x 6 mm /argon 200 bar W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut G 3/8 LH x 9 mm forming gas compressed air G 5/8 RH G 1/4 RH x 6 mm testing gas M19x1,5LH nut G 3/8 LH x 9 mm oxygen 300 bar 0 1,5 bar W30x2RH nut G 1/4 RH x 6 mm /argon helium nitrogen hydrogen W30x2LH nut G 3/8 LH x 9 mm forming gas compressed air W30x2RH nut G 1/4 RH x 6 mm testing gas W30x2LH nut G 3/8 LH x 9 mm Pressure regulator Vulkan acc. to ISO

48 Accessories Gas pre-heater Vulkan GPH 200 a patented system puts the heat, where it has to be: into the gas! For an efficient heat transfer, complete with plug 230 V/50 Hz For high pressure applications, especially for high output or low atmosphere temperatures, gas connections acc. to DIN 477, PN 300, 200 W Body plastic P 300 bar L 150 mm Gasführung brass Voltage 230V 50Hz H 90 mm Seals EPDM/PTFE flow 200 W H 90 mm Leakage rate 1x10-6mbar l/s protection class IP 44 M 2,0 kg Temperature -20 to +60 C approved with CE mark pressure inlet outlet oxygen 200 bar G 3/4 RH nut G 3/4 RHaf G 3/4 RHaf G 3/4 RH nut inert gases W 21,8x1/14 RH nut W 21,8x1/14 RHaf W 21,8x1/14 RHaf W 21,8x1/14 RH nut nitrogen W 24,32x1/14 RH nut W 24,32x1/14 RHaf nitrous oxide G 3/8RH nut G 3/8RHa oxygen 300 bar W 30 x 2 RH nut W 30 x 2 RHa M24x1,5RH nut M24x1,5RHak M24x1,5RHak M24x1,5RH nut inert gases W 30 x 2 RH nut W 30 x 2 RHa M24x1,5RH nut M24x1,5RHak M24x1,5RHak M24x1,5RH nut G 1/4RHi G 1/4RHi /4RH NPT F 1/4RH NPT M G 1/2RHk nut G 1/2RHak nitrogen W 30 x 2 RH nut W 30 x 2 RHa This sketch shows the development of the temperature when using 1 cylinder argon with 1 fin regulator at a constant flow of 25 Nm³/h at 5 bar working pressure Gas pre-heater Vulkan GPH 400 as GPH 200, but power 400 W Body plastic P 300 bar L 150 mm Gasführung brass Voltage 230V 50Hz H 90 mm Seals EPDM/PTFE flow 400 W H 90 mm Leakage rate 1x10-6mbar l/s protection class IP 44 M 2,0 kg Temperature -20 to +60 C approved with CE mark pressure inlet outlet oxygen 200 bar G 3/4 RH nut G 3/4 Rhaf G 3/4 Rhaf G 3/4 RH nut inert gases W 21,8x1/14 RH nut W 21,8x1/14 Rhaf W 21,8x1/14 Rhaf W 21,8x1/14 RH nut nitrogen W 24,32x1/14 RH nut W 24,32x1/14 Rhaf nitrous oxide G 3/8RG nut G 3/8RHa oxygen 300 bar W 30 x 2 RH nut W 30 x 2 Rha M 24x1,5 RH nut M 24x1,5 RHak M 24x1,5 RHak M 24x1,5 RH nut inert gases W 30 x 2 RH nut W 30 x 2 Rha M 24x1,5 RH nut M 24x1,5 RHak M 24x1,5 RHak M 24x1,5 RH nut G 1/4 RHi G 1/4 RHi /4 RH NPT F 1/4 RH NPT M G 1/2 RHk nut G 1/2 RHak nitrogen W 30 x 2 RH W 30 x 2 Rha Gas pre-heater Vulkan GPH 400 VA as GPH 400, gas line parts made from stainless steel Body plastic P 300 bar L 150 mm Gas line AlSi316L Voltage 230V 50Hz H 90 mm Seals EPDM/PTFE flow 200 W H 90 mm Leakage rate 1x10-6mbar l/s protection class IP 44 M 2,0 kg Temperature -20 to +60 C approved with CE mark pressure inlet outlet inert gases 300 bar G 1/4 RH NPT F G 1/4 RH NPT F

49 Magnetventile Vulkan 2/2-Way-Valves DN pressure connection powerless voltage power input oxygen bar G1/2 RHi closed 24V AC 24VA starting, 14VA/8W operating inertgas bar G1/2 RHi closed 24V AC 24VA starting, 14VA/8W operating fuel gas ATEX bar G1/2 RHi closed 24V AC / DC DC 9,5W, AC 24VA starting, 14VA/8W operating acetylene ATEX 13 0,2-1,5 bar G1/2 RHi closed 24V AC / DC DC 9W, AC 40W starting, 3W operating inertgas bar G1/2 RHi closed 230V AC 24VA starting, 14VA/8W operating argon, CO bar G1/2 RHi closed 230V AC 24VA starting, 14VA/8W operating oxygen bar G1/2 RHi closed 230V AC 24VA starting, 14VA/8W operating fuel gas ATEX bar G1/2 RHi closed 230V AC / DC 9 Watt Accessories Shut off valves Vulkan Body brass nickel-plated ball seat PTFE gekammert Ball brass chrome-plated valve seal EPDM double-o-ring Handle steel zinc-plated cover PVC in colour Temperature -20 to +60 C acc. to DIN Dimensions and pressures Thread inch DN PN acetylene PN other gases L mm L1 mm L2 mm L3 mm SW mm G 1/4 RH 6 1, G 3/8 RH 10 1, ,4 17 G 1/2 RH 15 1, G 3/4 RH 20 1, ,3 32 G 1RH 25 1, ,1 41 G 1 1/4 RH 32 1, ,4 50 G 1 1/2 RH 40 1, ,4 55 G 2 RH 50 1, ,7 70 Thread oxygen acetylene fuel gases inert gases compressed air liquid gases G 1/4 RH G 3/8 RH G 1/2 RH G 3/4 RH G 1 RH G 1 1/4 RH G 1 1/2 RH G 2 RH Safety valves Vulkan to assemble in manifolds or piping systems, according to the Pressure Equipment Directive 97/23/EG it is required to protect the downstream equipment against possible overpressure, the integrated relief valves in regulators do not fulfil these requirements, acc. to ISO 2503 and ISO 7291 they only protect the regulators themselves, therefore they do not fulfil the requirements of equipment with safety functions acc. to the PED! type inlet pressure range SV 16 G 1/2 RH inert gases 1-16 bar oxygen 1-16 bar SV 25 G 1/2 RH inert gases 1-25 bar oxygen 1-25 bar SV 45 G 1/2 RH inert gases/fuel gases 0,5-45 bar and oxygen SV 93 G 1/2 RH inert gases/fuel gases 0,1-93 bar oxygen 0,1-93 bar SVA 20 G 1/2 RH acetylene 1,65 bar T-piece for safety valves Vulkan to incorporate the safety valve in bundle- and cylinder manifolds or in a pipeline type connection for safety valve TS 38 G 3/8 RH SV TS 12 G 1/2 RH SV 25, SV 45, SVA TS 12H G 1/2 RH SV

50 Accessories Non return valve Vulkan prevents the back flow of gas, for manifolds and piping systems, for high pressure use Typ. pressure inlet outlet fitting length NV bar nut G1/2RHk G1/2RHak oxygen / inert gases / fuel gases 89 mm NVA nut G1/2RHk G1/2RHak acetylene 89 mm NV 40 HF 40 G3/4RHif G3/4RHif inert gases / fuel gases to 40 bar / 95 mm oxygen to 20 bar NV 40 HF 40 G1RHif G1RHif inert gases / fuel gases to 40 bar / 95 mm oxygen to 20 bar Sintered filter Vulkan for high pressure and high flow piping systems, complete assembled with exchangeable filter element Typ PS connections filter porosity filter material fitting length SFT300 inert gases, fuel gases, oxygen 300 M 24x1,5 RHak 45 µm Bronze (CuSn12) 94 mm SFT200 inert gases, fuel gases, oxygen 200 G 3/4 RHi 45 µm Bronze (CuSn12) 94 mm SFT50 inert gases, fuel gases 50 G 3/4 RHi 40 µm VA mm SFT40 oxygen 40 G 3/4 RHi 50 µm Bronze (CuSn11) 72 mm SFT50 inert gases, fuel gases 50 G 3/4 RHi 7-10 µm VA mm Adapter 200/300 Vulkan adapter to connect a regulator or hose with an inlet connection for 300 bar to a cylinder or bundle with an outlet connection for 200 bar inlet outlet oxygen G3/4RH nut W 30 x 2 RH inert gases W 21,8x1/14 RH nut W 30 x 2 RH nitrogen W 24,32x1/14 RH nut W 30 x 2 RH fuel gases W 21,8x1/14 LH nut W 30 x 2 LH compressed air G5/8RH nut W 30 x 2 RH Alarm Boxes Vulkan SK to indicate a pressure drop of a gas supply system, to connect contact gauges/pressure guards or transducers (with indication of the operation pressures, with internal indication (optical and acustical alert) and connection to external alert, complete in box Box plastic L 210 mm B 215 mm Voltage 230V/50Hz M 1,1 kg H 100 mm Protection class IP 44 Type Connections SK 2 KD 2 contact gauges / pressure guards SK 2 KD ex 2 contact gauges / pressure guards ATEX SK 2T 2 pressure transducers SK 3T 3 pressure transducers SK2Tex 2 pressure transducers ATEX SK3Tex 3 pressure transducers ATEX Switch and alarm boxes Vulkan SKD to indicate a pressure drop of a gas supply system, to connect contact gauges/pressure guards or transducers (with indication of the operation pressures and control of solenoid valves, with internal indication (optical and acustical alert) and connection to external alert, complete in box Box plastic L 290 mm B 280 mm Voltage 230V/50Hz M 2,8 kg H 175 mm Protection class IP 65 Type Connections SKD KDM 2 contact gauges / pressure guards and 2 solenoid valves SKD TM 2 pressure transducers and 2 solenoid valves SKDex KDM like SKD KDM, but ATEX SKDex TM like SKD TM, but ATEX

51 Pressure transducer Vulkan to determine the operating pressure and to alert a pressure drop, connection pressure: G 1/4RHaf, Supply voltage: VDC, Outlet signa: 4 20 ma, Cable length 2m Type Pressure range Gas Type DT bar oxygen/inert gases DT bar oxygen/inert gases DT 300 ex bar fuel gases DT 20 ex 0-26 bar acetylene Accessories T-piece Vulkan for high pressure, to connect a pressure guard, transducer or contact gauge to a manifold or in a pipeline connection connections G 3/4 RH G 1/4RH acc. to EN M24x1,5 RH G 1/4RH acc. to EN Safety gauge Vulkan acc. to ISO 5171 with steel body Ø 63 mm Body steel coated diameter Ø 63 mm Connection brass thread G 1/4 RH Temperature -20 to +60 C acc. to ISO 5171, class 2.5 working pressure scale acetylene 0-26 bar 0-40 / 26 bar ,5 bar 0-2,5 / 1,5 bar oxygen bar / 300 bar and bar / 200 bar other gases bar / 100 bar bar / 60 bar bar 0-60 / 40 bar bar 0-40 / 20 bar bar 0-16 / 10 bar bar 0-10 / 6 bar bar 0-6 / 4 bar ,5 bar 0-4 / 2,5 bar ,5 bar 0-2,5 / 1,5 bar bar 0-1,6 / 1 bar /argon 0-20 Nl/min Nl/min Nl/min Nl/min Contact gauge Vulkan acc. to DIN EN stainless steel body Ø 63 mm with Reed contact,also for ATEX area Body stainless steel diameter Ø 63 mm Anschluss stainless steel connection G 1/4 RH Contakt Reed type opens with falling pressure power 10W at DC and 10VA at AC switch hysteresis 1,6%. switch voltage 24 V. switch power 0,4 A temperature -30 to +75 C acc. to DIN EN 837-1, class 1.6 working pressure scale acetylene 0-26 bar 0-40 / 26 bar ,5 bar 0-2,5 / 1,5 bar oxygen bar / 300 bar and bar / 200 bar other gases bar / 100 bar bar 0-60 / 40 bar bar 0-40 / 20 bar bar 0-16 / 10 bar Gauge seals from aluminium 11 x 5,5 mm x 5,5 mm Thickness packing unit 1,5 mm 20 pieces ,8 mm 40 pieces

52 Accessories Rubber protection cap acc. to DIN colour grey, acc. to DIN , for safety gauges Ø 63 mm, not for contact gauges Connection seals for regulators 200 and 300 bar pressure material packing unit oxygen/ 200 bar fibermaterial 50 pieces inert gases and polyamide 30 pieces fuel gases copper 2 pieces PTFE 10 pieces acetylene 26 bar rubber 10 pieces testing gas 200 bar fibermaterial 10 pieces nitrous oxide 80 bar fibermaterial 10 pieces oxygen/ 300 bar Viton 10 pieces inert gases and 300 bar Viton 10 pieces fuel gases EPDM 10pieces Hand tight connections 200 bar for hoses and regulators, to connect to cylinder valves, connections acc. to DIN 477 connection DIN oxygen G 3/4 RH no nitrogen W 24,32 x 1/14 RH no inert gases W 21,8 x 1/14 RH no fuel gases W 21,8 x 1/14 LH no nitrous oxide G 3/8 RH no testing gas M 19x1,5 LH no Balloon valve Vulkan Kink valve to fill up Gas balloons, for 200 bar connection W 21,8 x 1/14RH with hand tight nut Typ with thread with needle tip Gas saver Vulkan saves fuel gas and oxygen complete with pilot flame, connection oxygen G 1/4 RH, connection fuel gases G 3/8 LH acetylene/oxygen propane or natural gas/oxygen Test gauge Vulkan to check the cylinder pressure, with high pressure gauge and purge valve, connections acc. to DIN 477 pressure connection oxygen 200 bar G 3/4 RH inert gases W 21,8x1/14 RH nitrogen W 24,32x1/14 RH fuel gases W 21,8x1/14 LH compressed air G 5/8 RH testing gas M 19 x 1,5 RH acetylene 26 bar clamp oxygen 300 bar W 30 x 2 RH inert gases W 30 x 2 RH fuel gases W 30 x 2 LH compressed air W 30 x 2 RH

53 Shut off valve Vareo DV for high pressure PN 300 for all gases, except acetylene inlet outlet M 24 x 1,5 RH nut M 24 x 1,5 RH male M 24 x 1,5 RH male M 24 x 1,5 RH nut G 3/4 RH nut G 3/4 RH male G 3/4 RH male G 3/4 RH nut Accessories Purge valve for High pressure complete with clamp ring for relief pipe 10 mm Connection M 24 x 1,5 RHk nut G 3/4 RHf nut Gas type labels in colour 36 x 26 mm 180 x 38 mm oxygen acetylene inert gases argon nitrogen hydrogen helium nitrous oxide propane compressed air mixed gas fuel gases forming gas

54 Accessories - Tube fittings and flashback arrestors Tube fittings with clamp ring brass and stainless steel to connect to regulator Vulkan or for pipelines connection Ø pipe male stainless steel brass G 1/4 RH 6 mm up to PN up to PN mm mm mm G 3/8 RH 6 mm up to PN up to PN mm mm mm G 1/2 RH 8 mm up to PN up to PN mm mm mm mm mm G 3/4 RH 12 mm up to PN up to PN mm mm mm mm Flashback arrestors VU/RTC acc. to ISO 5175/EN 730 to connect to regulator, consisting of filter, non return valve, sintered element and thermal cut off valve and flame dispenser Body brass acetylene 1,5 bar Q 6,0 Nm³/h Seals EPDM oxygen 20 bar Q 80,0 Nm³/h Filter sintered bronze propane 3,5 bar Q 12,5 Nm³/h Leakage rate 1x10-6mbar l/s L 83 mm M 155 g Temperature -20 to +60 C d Ø 22 mm acc. to ISO 5175/EN 730 type connection thread VU/RTC-F 3/8 fuel gases G 3/8 LH VU/RTC-O 1/4 oxygen G 1/4 RH Flashback arrestors VU/RT91C HiFlow acc. to ISO 5175/EN 730 to connect to regulator, consisting of filter, non return valve, sintered element and thermal cut off valve and flame dispenser Body brass acetylene 1,5 bar Q 23 Nm³/h Seals EPDM oxygen 20 bar Q 300 Nm³/h Filter sintered bronze propane 3,5 bar Q 50 Nm³/h Leakage rate 1x10-6mbar l/s L 110 mm M 425 g Temperature -20 to +60 C d Ø 34 mm acc. to ISO 5175/EN 730 type connection thread VU/RT91C-F 3/8 fuel gases G 3/8 LH VU/RT91C-F 1/2 G 1/2 LH VU/RT91C-O 1/4 oxygen G 1/4 RH VU/RT91C-O 1/2 G 1/2 RH

55 Accessories for regulator for all regulators Vulkan, for pressure regulators, manifold regulators, In-line regulators and tapping point regulators Chrome-plating of regulators regulator complete chrome-plated and specially cleaned Typ Metal diaphragm for regulator metal diaphragm from stainless steel for higher gas quality up to 5.0 Special working pressure ranges for regulators other working pressure ranges for standard regulators for the following types: F 10/20, F 10 F, L 10/20, E 10/20, H 10/20 F10/20/40/60 F10F L10/20/40 E10/20/40 H10/20/40/ F10/2 / F15/ HR20/40/60 LR20/40/60 ER20/ Typ F10/20/40/60 F10F L10/20/40 E10/20/40 H10/20/40/ F10/2 / F15/ HR20/40/60 LR20/40/60 ER20/ range 0-1,5 / 2,5 bar ,5 / 4 bar / 6 bar / 10 bar Accessories for regulators and spare part sets Vulkan Surcharge for special inlet- & outlet connections for regulators every single regulator can be fitted with special in- and outlet connections like clamp ring connections or brazing or welding connecting pieces, an adaptation is necessary, which is described by the following numbers type Special inlet connection Special outlet connection Spare part sets for regulators the spare part sets are mostly divided into high pressure sets and low pressure sets and contain all necessary parts, filters and seals for a proper refurbishment Spare part sets for Pressure regulators regulator type high pressure low pressure low pressure Standard Metallmembran F10/200 Standard oxygen/inert gases/fuel gases F10 acetylene acetylene F10/ F10F 200bar oxygen/inert gases/fuel gases F10/ F10F 200bar helium/hydrogen F10/ F10F 300bar oxygen/inert gases/fuel gases F10/ F10F 300bar helium/hydrogen F15/200 oxygen/inert gases/fuel gases F15/300 oxygen/inert gases/fuel gases F20/200bar oxygen/inert gases/fuel gases F20/300bar oxygen/inert gases/fuel gases F40/200 oxygen/inert gases/fuel gases F40/300 oxygen/inert gases/fuel gases F10/2 200 oxygen/inert gases/fuel gases F10/2 300 oxygen/inert gases/fuel gases F15/2 200 oxygen/inert gases/fuel gases F15/2 300 oxygen/inert gases/fuel gases

56 Spare part sets Vulkan Spare part sets for flowmeter complete for regulator with flowmeter for type flowmeter complete F10F/ E10F /argon 1-14 Nl/min flowmeter complete F10F/ E10F /argon 4-32 Nl/min flowmeter complete F10F/ E10F hydrogen 2,6-26 Nl/min flowmeter complete F10F/ E10F forming gas 2-23 Nl/min flowmeter complete F10F/ E10F nitrogen 4-42 Nl/min Spare part sets for manifold regulators regulator type high pressure low pressure low pressure standard metal diaphragm H10/200 oxygen/inert gases/fuel gases H10/200 helium/hydrogen H10/300 oxygen/inert gases/fuel gases H10/300 helium/hydrogen H20/200 oxygen/inert gases/fuel gases H20/300 oxygen/inert gases/fuel gases H40/200 oxygen/inert gases/fuel gases H40/300 oxygen/inert gases/fuel gases HR20/200 oxygen/inert gases/fuel gases HR20/300 oxygen/inert gases/fuel gases HR40/60 /200 inert gases/fuel gases HR40/60 /200 oxygen HR40/60 /300 inert gases/fuel gases HR40/60 /300 oxygen HA5 acetylene HA10 acetylene H20 acetylene acetylene Spare part sets for In-line regulator regulator type high pressure low pressure low pressure standard metal diaphragm L10 oxygen/inert gases/fuel gases L10 helium/hydrogen L20 oxygen/inert gases/fuel gases L20 helium/hydrogen L15 oxygen/inert gases/fuel gases L40 oxygen/inert gases/fuel gases L10/2 oxygen/inert gases/fuel gases L15/2 oxygen/inert gases/fuel gases LD 1 oxygen/inert gases, not for LD 1 carbon dioxide LH16 oxygen/inert gases/fuel gases LH25 oxygen/inert gases/fuel gases LR20 oxygen/inert gases/fuel gases LR40/60 oxygen LR40/60 inert gases/fuel gases L10 acetylene acetylene

57 Spare part sets for tapping point regulators regulator type high pressure low pressure low pressure standard metal diaphragm E10 /F oxygen/inert gases/fuel gases E10 acetylene acetylene E20 oxygen/inert gases/fuel gases E20 acetylene acetylene E40 oxygen E40 inert gases/fuel gases ER20 oxygen/inert gases/fuel gases ER40/60 inert gases/fuel gases ER40/60 oxygen Spare part sets Vulkan Spare part sets for relief valves for type relief valve F/H/L 10 oxygen/other gases relief valve F/H/L/E 20 oxygen/other gases relief valve F/H/L/E 40/60 oxygen/other gases relief valve F10 acetylene relief valve HR/LR 20 oxygen/other gases relief valve HR 40/60 oxygen/other gases Spare part sets for Automatic manifolds for type range AM 35 /D/K complete for regulator and change over block high/low pressure AM 35 /DH/KH AM 45 /K AM 55 /K change over block for AM35/D/K/DH/KH only seals high/low pressure Seals and piston Seals, piston and bush change over block for AM45/D/K 55 /D/K only seals Seals and piston Seals, piston and bush In-line regulator AD 35 off AM 35 /D/K high/low pressure Spare part sets for Vareo block description set of seals Vareo block complete - acetylene set of seals Vareo block complete except acetylene set of seals for shut off valve acetylene set of seals for shut off valve except acetylene set of seals for non return valve Vareo set of seals for non return valve Vareo , with Filter inlet connection with non return valve complete for inlet connection with non return valve complete for

58 Accessories for regulators Surcharge for special connections for pressure regulators every pressure regulator can be fitted with the following cylinder connections, which are mostly on stock country/countries VDMA standard, no./type connection oxygen Australia also for Argon and nitrogen 1.1 AS2473, Typ 10 AG G5/8RHk Belgium 1.2 NBN 226 AG G5/8RHk Danmark, Norway, Croatia, Czech republic, Slowakia, Slovenia 1.3 DS727.2 nut W21,8x1/14RHf Germany, Austria, Poland, Switzerland, Czech republic 1.4 DIN 477-1, Nr. 9 nut G3/4RHf France, Spain Portugal Greece, Northern Africa 1.5 NFE AG W22,91x1/14RHk Great Britain, Egypt, Asia, South Africa, Arabia also for Argon and nitrogen 1.6 BS342-1, Nr. 3 AG G5/8RHk Italy, Cyprus 1.7 UNI 4406 nut W21,7x1/14 RHf Netherlands 1.8 NEN3268 RI2 AG G5/8RHk Sweden, Norway, Finland, Greece, Turkey 1.9 SMS 690 nut W21,8x1/14RHf Switzerland 1.11 SN Bl. 2 nut G3/4RHf USA, South America 1.10 CGA 540 nut 0,908x1/14 RHk acetylen Australia also for hydrogen 2.1 AS2473, Typ 20 AG G5/8LHk Belgium 2.2 NBN 226, Typ D clamp Danmark, Sweden, Norway, Finland, South America, 2.3 DS727.7 AG G3/4RHf Germany, Greece, Austria, Poland, Czech republic, Switzerland, Slowakia,Turkey, Cyprus 2.4 DIN 477-1, Nr. 3 clamp France, Spain Portugal, Northern Africa 2.5 NFA 84421, Typ 2 clamp France, Spain Portugal, Northern Africa 2.6 NFE AG G5/8LHk Great Britain, Egypt, Asia, South Africa, Arabia 2.7 BS342-1, Nr. 2 AG G5/8A-LHk Italy 2.8 UNI 4411 clamp Netherlands 2.11 NEN3268 Typ 4 clamp USA, Asia 2.14 CGA 510 AG 0,880x1/14LHk Switzerland 2.15 SN Bl. 6 AG G3/4RHf CO2 Danmark, Norway, Croatia, Czech republic, Slowakia, Slovenia 1.3 DS727.2 nut W21,8x1/14RHf Czech republic, Slowakia 1.4 DIN 477-1, Nr. 9 nut G3/4RHf Italy 1.7 UNI 4406 nut W21,7x1/14 RHf Sweden 1.9 SMS 690 nut W21,8x1/14RHf Australia 4.1 AS2473, Typ 30 nut 0,860x1/14RHf Germany, Belgium, Finland, Austria, Poland, Switzerland 4.2 DIN 477-1, Nr. 6 nut W21,8x1/14 RHf France, Spain, Portugal, Greece, Northern Africa also for Argon and nitrogen 4.3 NFE29650 Typ C nut W21,7x1/14RHk/f Great Britain, Egypt, Asia, South Africa, Arabia 4.4 BS342-1, Nr. 8 nut 0,860x1/14RHf Belgium, Netherlands 4.5 NEN RU1 nut W21,8x1/14 RHf USA, South America 4.6 CGA 320 nut 0,830x1/14RHf Switzerland 4.7 SN Bl. 7 nut W21,8x1/14 RHf argon Slowakia 1.4 DIN 477-1, Nr. 9 nut G3/4RHf Germany, Austria, Poland, Sweden, Switzerland, Czech republic 4.2 DIN 477-1, Nr. 6 nut W21,8x1/14 RHf Danmark, Norway 5.1 DS727.3 nut W24,32x1/14RHf Italy 5.2 UNI 4412 AG W24,5x1/14RHk Netherlands, Sweden 5.3 NEN RU3 nut W24,32x1/14RHf USA, South America 5.5 CGA 580 AG 0,960 x 1/14 RHk hydrogen Finland 7.1 DIN 477-1, Nr. 10 nut W24,32x1/14RHf Germany, Finland, Norway, Austria, Poland, Sweden, Switzerland, Slowakia Czech republic 3.1 DIN 477-1, Nr. 1 nut W21,8x1/14LHf France, Spain, Portugal, Greece, Northern Africa 3.2 NFE29650 Typ E nut W21,7x1/14LHk Great Britain, Egypt, Asia, South Africa, Arabia 3.3 BS342-1, Nr. 4 AG G5/8A-LHk Italy 3.5 UNI 4405 nut W20x1/14LHf Netherlands 3.6 NEN LU1 nut W21,8x1/14LHf Danmark 6.1 DS727.1 nut W21,8x1/14LHf USA, South America 6.4 CGA 350 nut 0,830x1/14RHk nitrogen Danmark, Norway 5.1 DS727.3 nut W24,32x1/14RHf Netherlands 5.3 NEN RU3 nut W24,32x1/14RHf Sweden 5.4 SS2238, Typ A nut W24,32x1/14RHf USA, South America 5.5 CGA 580 AG 0,960 x 1/14 RHk Germany, Finland, Austria, Poland, Switzerland, Slowakia, Czech republic 7.1 DIN 477-1, Nr. 10 nut W24,32x1/14RHf Italy 7.2 UNI 4409 AG W21,7x1/14RHf

59 table 1 Automatic manifold AM 35/K Base stations Modula Vareo FLOW CHARTS flow in Nm 3 /h flow in Nm 3 /h table 2 Manifold regulators Tapping point regulator acetylene Flow charts -. flow working pressure in bar working pressure in bar table 3 Pressure regulators, also 300 bar Tapping point regulators table 4 Pressure regulators, also 300 bar Tapping point regulator flow in Nm 3 /h flow in Nm 3 /h working pressure in bar working pressure in bar at inlet pressure = 2 x working pressure + 1 bar Conversion factors All flow data are measured with compressed air (acc. to DIN), except acetylene (measured with acetylene). Please see following conversion factors for the flow of other gases: Chemical sign Conversion factors Chemical sign Conversion factors argon Ar 0,85 propane C 3 H 8 0,80 helium He 2,70 oxygen O 2 0,95 carbon dioxide 0,84 nitrogen N 2 1,00 nitrous oxide N 2 O 0,80 hydrogen H 2 3,80 For more information please do not hesitate to contact us! 59

60 Flow charts -. flow FLOW CHARTS flow in Nm 3 /h table 5 Manifold regulator also 300 bar flow in Nm 3 /h table 6 In-line regulator acetylene and propane working pressure in bar working pressure in bar table 7 In-line regulator table 8 In-line fin regulator flow in Nm 3 /h flow in Nm 3 /h working pressure in bar working pressure in bar at inlet pressure = 2 x working pressure + 1 bar Conversion factors All flow data are measured with compressed air (acc. to DIN), except acetylene (measured with acetylene). Please see following conversion factors for the flow of other gases: Chemical sign Conversion factors Chemical sign Conversion factors argon Ar 0,85 propane C 3 H 8 0,80 helium He 2,70 oxygen O 2 0,95 carbon dioxide 0,84 nitrogen N 2 1,00 nitrous oxide N 2 O 0,80 hydrogen H 2 3,80 For more information please do not hesitate to contact us! 60

61 LABLINE Vulkan LabLine VULKAN LABLINE FOR HIGH PURITY GASES UP TO

62 Automatic manifolds LabLine Modula Vulkan LABLINE All products of the Vulkan LabLine range are manufactured from brass and chrome-plated after a special Vibratory Finishing cleaning processes, according to the latest environmental requirements. This is a process that works on a mechanical basis for surface finishing. In the working bowl of the machines the grinding media (Chips) and work pieces are being brought to a relative movement to each other. Water and compound control the required surface treatment and guarantee the latest state-ofthe-art in surface treatment. All Vulkan LabLine components undercut the limit of imal 100 mg/m² of fat content of the surfaces. The leak rate is approx therefore all parts are helium leak proof. The Vulkan LabLine products are designed and manufactured according to the latest DIN, EN and ISO standards and fulfil also the requirements of the PED, and the German DGUV rules. Automatic manifold Modula At the fully automatic change-over device, the working pressure is adjusted through the pressure regulator. The switch from the empty to the full side will occur here automatically with the help of the change-over block which is installed between the two main pressure regulators. It is important that both manifold regulators are adjusted to the same working pressure. This is done by the manufacturer. If the cylinders or bundles on one side are empty, the pressure of the cylinders is reduced, leading to a reduction of the working pressure of the manifold regulator adjacent to the change-over block. If the working pressure of the main pressure regulator drops by more than 3-4/5-7 bar below the programmed pressure, the tension of the spring inside of the change-over block will cause the piston to move to the full side. If the empty cylinders or bundles are replaced, they must be opened again, so that the full pressure comes up to the automatic changeover device. This does not cause another switch of the change-over block. The switch will occur only at the time when the side currently in use is empty. The high pressure compensation Effect on all high pressure regulators allows an absolute constant working pressure. Thus it succeeds nearly in process performance of a double stage regulator for the price of a single stage regulator. It secures therefore a reproductive and absolute constant working result. The Vulkan LabLine programme can offer you an extensive range of accessories, as for example Vareo block rail systems, high pressure metal hoses, purge valves or additional filters. Many national and international cylinder connections are available, as well as different pressure ranges or flow ranges for flowmeter regulators and outlet connections. If you need more information or technical details, please do not hesitate to contact us. Automatic manifold Modula AM 35/300 K for oxygen and other gases except acetylene Modula add on system, can be expanded to your requirements consisting of 2 Manifold regulators H20 acc. to ISO 7291, adiabatic compression tested, 2 ND-purge valves, 1 In-line regulator AD 35, 1 Automatic change over block, 1 Main shut off valve, 2 contact gauges with Reed switch (optional) acc. to DIN EN complete on stainless steel base plate Body brass chrome-plated pe 300 bar pa 0-10 bar Seals EPDM, polyamide, Viton, PTFE Q 50 Nm³/h at pa 10 bar Diaphragm stainless steel de M 24x1,5 RH da clamp ring 8 mm Leakage rate 1x10-6mbar l/s B 450 mm H 420 mm Temperature -20 to +60 C T 210 mm M 11 kg with contact gauge without contact gauge oxygen nitrogen argon helium hydrogen compressed air

63 Manual manifold Modula Vareo 300 bar Modula add-on system, for cylinders- and bundles, flexible and always expandable. The heart of this system is the distributing block Modula Vareo which consists of 2 inlets for 2 cylinders or bundles and 2 outlets to connecting a manifold regulator or further distributing blocks Modula Vareo. The distributing block Modula Vareo contains the following components: 2 shut off valves to shut off the cylinders or bundles, 2 non return valves prevent the reverse flow of the gas into empty cylinders or bundles, 2 sinter metal filters prevent the penetration of dirt and extend the life cycle of the complete manifold. Optionally: 2 purge valves Your advantages of Modula Vareo: - compact construction - all functions in one block - modular system - always expandable - easy assembly - only few thread connections - easy maintenance - all components are easily exchangeable - individual - for 300 bar or 200 bar These components are available: Base station BS One distributing block Modula Vareo with manifold regulator and shut off valve completely fixed. For 2 x 1 cylinders or 2 x 1 bundles or for the connection of further manifold stations VS to connect more cylinders or bundles. LABLINE Manual manifolds LabLine Modula Vulkan Vareo Manifold station VS Replaces the traditional rail system. To connect to other manifold systems or to connect to a base station. Base station Modula Vareo BS 50 consisting of one distributing block Vareo with two inlets for 2x1 cylinder or 2x1 bundle or for connection of further distributing blocks Vareo Vareo 1 Manifold regulator Vulkan H 10, acc. to ISO 7291, adiabatic compression tested, 1 Main shut off valve, complete on stainless steel base plate, purge valve optional. Body brass chrome-plated pe 300 bar pa 0-10 bar Seals EPDM, polyamide, Viton Q 50 Nm³/h at pa 10 bar Diaphragm stainless steel de M 24x1,5 RH da clamp ring 8 mm Leakage rate 1x10-6mbar l/s B 570 mm H 250 mm Temperature -20 to +60 C T 210 mm M 10 kg oxygen nitrogen argon helium hydrogen compressed air Manifold stations Modula Vareo One manifold station has two connections for cylinders or bundles. It can be connected to one base station and one other manifold station or with two other manifold stations. The manifold stations consists of two sinter filters, two non return valves and two shut off valves. Optionally every inlet can be equipped with a purge valve, including the possibility to install a purging pipe system. Body brass chrome-plated p 300 bar Seals EPDM de M24x1,5RH RH da M24x1,5RH mm Leakage rate 1x10-6mbar l/s B 190 mm H 190 mm Temperature -20 to +60 C T 235 mm M 5 kg type for oxygen, inert gases, fuel gases except acetylene for acetylene inlet W21,8x1/14LH Purge valve Vareo to fit into manifold station or base station Modula Vareo, complete with shut off valve and optionally with clamp ring outlet Ø 10 mm for connection of a purging pipe system type without clamp ring in outlet with clamp ring in outlet to connect to outlet of Vareo VS

64 Rail systems Vareo/Single cylinder manifolds Vareo LABLINE Connecting pipes Vareo DN 10 to connect a manifold station to a base station or to automatic manifolds Modula as well as manifold stations to each other connecting pipe VB, 90 bent, length 2x 150 mm, to connect a manifold station to a base station type connecting pipe VU, 2x bent, length 300 mm, to connect a manifold station to an automatic manifold and Base station for cylinders connecting pipe VF, straight, length 400 mm, to connect two manifold stations, for cylinders for oxygen, inert gases, fuel gases except acetylene for acetylene type for oxygen, inert gases, fuel gases except acetylene for acetylene type for oxygen, inert gases, fuel gases except acetylene for acetylene Single cylinder manifold Modula SE 10/300/K for oxygen and other gases, Modula add-on system, also for laser gases consisting of: 1 HP-shut off valve, 1 manifold regulator H 10, acc. to ISO 7291, adiabatic compression tested, 1 main shut off valve, 1 purge valve, 1 cylinder rack, complete on stainless steel base plate for acetylene not chrome-plated, including flashback arrestor acc. to EN 730, adjustable 0-1,5 bar, 5 Nm 3 /h, outlet G 3/8 LHak acc. to EN 560 Body brass chrome-plated pe 300 bar pa 0-10 bar Seals EPDM, polyamide Q 50 Nm³/h at pa 10 bar Diaphragm stainless steel de M 24x1,5 RH da clamp ring 8 mm Leakage rate 1x10-6mbar l/s B 420 mm H 280 mm Temperature -20 to +60 C T 110 mm M 4,5 kg without contact gauge with contact gauge oxygen acetylene nitrogen argon helium hydrogen compressed air Single cylinder manifold Modula SE 10/2 300/K for oxygen and other gases, Modula add-on system, also for laser gases consisting of: 1 HP-shut off valve, 1 manifold regulator H10/2 double stage, acc. to ISO 7291, adiabatic compression tested, 1 main shut off valve, 1 purge valve,1 cylinder rack complete on stainless steel base plate Body brass chrome-plated pe 300 bar pa 0-10 bar Seals EPDM, polyamide Q 30 Nm³/h at pa 10 bar Diaphragm stainless steel de M 24x1,5 RH da clamp ring 8 mm Leakage rate 1x10-6mbar l/s B 480 mm H 280 mm Temperature -20 to +60 C T 110 mm M 5,0 kg without contact gauge with contact gauge oxygen nitrogen argon helium hydrogen compressed air

65 HP-Stainless steel hose Vareo DN 6 stainless steel hose to connect cylinders and bundles to rail systems for manifolds, inside stainless steel tube, outside netting from stainless steel wire with anti kink springs, complete welded and tested Seele Ringwellschlauch Geflecht 1fach aus komplett verschweißt mit Knickschutzfedern PS DN 450 bar 6 mm HP-Stainless steel hose Vareo 200 bar LABLINE Connection Connection to cylinder to Vareo length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm oxygen G 3/4 RH M24x1,5 RH inert gases W21,8x1/14 RH M24x1,5 RH nitrogen W24,32x1/14 RH M24x1,5 RH fuel gases W21,8x1/14 LH M24x1,5 RH compressed air G 5/8 RH M24x1,5 RH HP-Stainless steel hose Vareo 300 bar Connection Connection to cylinder to Vareo length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm oxygen W30x2 RH M24x1,5 RH inert gases W30x2 RH M24x1,5 RH nitrogen W30x2 RH M24x1,5 RH fuel gases W30x2 LH M24x1,5 RH compressed air W30x2 RH M24x1,5 RH Cylinder and bundle hoses Vulkan HP-Stainless steel hose standard DN 6 stainless steel hose to connect cylinders and bundles to rail systems for manifolds, inside stainless steel tube, outside netting from stainless steel wire, with anti kink springs, complete welded and tested HP-Stainless steel hose standard 200 bar Connection both sides length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm oxygen G 3/4 RH inert gases W21,8x1/14 RH nitrogen W24,32x1/14 RH fuel gases W21,8x1/14 LH compressed air G 5/8 RH HP-Stainless steel hose standard 300 bar Connection both sides length 800mm length 1.000mm length 1.500mm length 2.000mm length 2.500mm length 3.000mm oxygen W30x2 RH inert gases W30x2 RH nitrogen W30x2 RH fuel gases W30x2 LH compressed air W30x2 RH

66 Tapping point Vulkan LABLINE Tapping point-regulator Vulkan E 10 single stage, with working gauge to adjust the working pressure at the point of use and connection to tapping point Body brass chrome-plated pe 20 bar pa 0-10 bar Seals EPDM Q see below at pa see below Diaphragm stainless steel de G 3/8 RH/LH da see below Leakage rate 1x10-6mbar l/s B 120 mm H 180 mm Temperature -20 to +60 C T 65 mm M 1,0 kg inlet pressure pressure flow inlet outlet oxygen 20 bar 0-10 bar 40 Nm³/h G 3/8 RH nut clamp ring 6mm acetylene 1,5 bar 0-1,5 bar 3,5 Nm³/h G 3/8 LH nut /argon 20 bar 0-10 bar 40 Nm³/h G 3/8 RH nut Nl/min. 1,2 Nm³/h Nl/min. 1,8 Nm³/h helium 0-10 bar 40 Nm³/h nitrogen 0-10 bar G 3/8 RH nut hydrogen G 3/8 LH nut forming gas Nl/min. 1,2 Nm³/h Nl/min. 1,8 Nm³/h Nl/min. 3,0 Nm³/h compressed air 0-10 bar 40 Nm³/h G 3/8 RH nut testing gas 0-10 bar G 3/8 LH nut nitrous oxide 0-10 bar G 3/8 RH nut propane 8 bar 0-4 bar 5 kg/h G 3/8 LH nut bar 0-2,5 bar 2,5 kg/h ethene 0-1,5 bar 3,5 Nm³/h methane 0-1,5 bar 3,5 Nm³/h Tapping point-regulator Vulkan E 10 F single stage with Flowmeter and regulating valve for precise adjustment of the flow per minute Body brass chrome-plated pe 20 bar pa see below Seals EPDM Q see below at pa see below Diaphragm stainless steel de G 3/8 RH/LH da see below Leakage rate 1x10-6mbar l/s B 120 mm H 220 mm Temperature -20 to +60 C T 65 mm M 1,0 kg flow range pressure inlet outlet oxygen 1,4-14,5 Nl/min. 1,5 bar G 3/8 RH nut Klemmring 6mm /argon 1,0-6,5 Nl/min. 4,0 bar ,4-14,0 Nl/min. 1,5 bar ,0-22,0 Nl/min ,6-36,0 Nl/min ,0-95,0 Nl/min. 9,0 bar helium 3,6-34,0 Nl/min. 1,5 bar , 0-65,0 Nl/min nitrogen 0,3-2,0 Nl/min ,0-42 Nl/min ,5-85,0 Nl/min. 4,0 bar hydrogen 1,8-18,0 Nl/min. 1,5 bar G 3/8 LH nut ,6-26 Nl/min forming gas 2,0-23,0 Nl/min Tapping point Vulkan Alu-Line 3/8 complete on aluminium profile, horizontally adjustable, with shut off valve, connection to piping system clamp ring Ø 8 mm, connection for tapping point regulator G3/8RH nut or LH nut, PN 40, acetylene PN 1,5 for 1 tapping point regulator oxygen acetylene fuel gases inert gases propane compr. air for 2 tapping point regulator oxygen acetylene fuel gases inert gases propane compr. air oxygen acetylene fuel gases inert gases propane compressed air

67 In-line regulator Vulkan L 10 single stage, with safety gauges acc. to ISO 5171 Body brass chrome-plated pe 20 bar pa 0-10 bar Seals polyamide, EPDM Q 45 Nm³/h at pa 10 bar Diaphragm stainless steel de clamp ring 8 mm da clamp ring 8 mm Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg oxygen /argon helium nitrogen hydrogen compressed air LABLINE In-line regulator Vulkan In-line regulator Vulkan L 15 single stage, with safety gauges acc. to ISO 5171 Body brass chrome-plated pe 20 bar pa 0-1,5 bar Seals polyamide, EPDM Q 8 Nm³/h at pa 1,5 bar Diaphragm stainless steel de clamp ring 8 mm da clamp ring 8 mm Leakage rate 1x10-6mbar l/s B 200 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg oxygen /argon helium nitrogen hydrogen compressed air In-line regulator Vulkan L 10/2 double stage, with safety gauges acc. to ISO 5171 In-line regulator Vulkan L 15/2 double stage, with safety gauges acc. to ISO 5171 Body brass chrome-plated pe 20 bar pa 0-10 bar Seals polyamide, EPDM Q 30 Nm³/h at pa 10 bar Diaphragm stainless steel de clamp ring 8 mm da clamp ring 8 mm Leakage rate 1x10-6mbar l/s B 240 mm H 190 mm Temperature -20 to +60 C T 75 mm M 2,0 kg oxygen /argon helium nitrogen hydrogen compressed air Body brass chrome-plated pe 20 bar pa 0-1,5 bar Seals polyamide, EPDM Q 8 Nm³/h at pa 1,5 bar Diaphragm stainless steel de clamp ring 8 mm da clamp ring 8 mm Leakage rate 1x10-6mbar l/s B 240 mm H 190 mm Temperature -20 to +60 C T 75 mm M 2,0 kg oxygen /argon helium nitrogen hydrogen compressed air

68 Pressure regulator Vulkan acc. to ISO 2503 LABLINE Vulkan Effect with high pressure compensation for constant working pressure at all working conditions Without high pressure compensation As the cylinder pressure decreases, the working pressure increases. The consumption of gas will increase with 300 bar up to more than 50 % With high pressure compensation As the cylinder pressure decreases, the working pressure will remain constant and so does your gas consumption you realise significant gas savings! 300 bar gas cylinders intensify enormously the effect of increase of working pressure, while the cylinder pressure is decreasing. It is even more important to use a pressure regulator with high pressure compensation than with 200 bar gas cylinders. Therefore all pressure regulators Vulkan have the integrated high pressure compensation Effect to provide you an optimal working performance and safety. Pressure regulator Vulkan F10/300 Effect single stage, acc. to ISO 2503, for oxygen and acetylene BAM-approved Body brass chrome-plated pe 200/300 bar pa 0-10 bar Seals polyamide, EPDM Q see below at pa see below Diaphragm stainless steel de see below da see below Leakage rate 1x10-6mbar l/s B 210 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg inlet pressure pressure flow inlet outlet oxygen 200 bar 0-10 bar 48 Nm³/h G3/4RH nut clamp ring 6 mm acetylene 20 bar 0-1,5 bar 3,5 Nm³/h clamp /argon 200 bar 0-10 bar 48 Nm³/h W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut forming gas Nl/min. 1,8 Nm³/h Nl/min. 3,0 Nm³/h compr. air 0-10 bar 48 Nm³/h G 5/8 RH testing gas M19x1,5LH nut nitrous oxide 80 bar G 3/8 RH nut methane 200 bar W21,8x1/14LH nut oxygen 300 bar 0-10 bar 48 Nm³/h W30x2RH nut clamp ring 6 mm /argon 48 Nm³/h Nl/min. 1,2 Nm³/h Nl/min. 1,8 Nm³/h helium 0-10 bar 48 Nm³/h nitrogen 0-10 bar hydrogen W30x2LH nut forming gas Nl/min. 1,8 Nm³/h Nl/min. 3,0 Nm³/h compr. air 0-10 bar 48 Nm³/h W30x2RH nut testing gas W30x2LH nut Pressure regulator Vulkan F10/300 Effect LG single stage, acc. to ISO 2503, for oxygen BAM-approved, for laser gases, as above, but with incorporated purge valve at the low pressure side, with outlet clamp ring VA 6 mm and shut off valve in outlet inlet pressure pressure inlet outlet oxygen 200 bar 0-10 bar G3/4RH nut clamp ring 6 mm /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut forming gas W21,8x1/14LH nut hydrogen testing gas M19x1,5LH nut oxygen 300 bar 0-10 bar W 30x2RH nut clamp ring 6 mm /argon helium nitrogen hydrogen W 30x2LH nut forming gas testing gas

69 Pressure regulator Vulkan F 10/300 F Effect with Flowmeter single stage, acc. to ISO 2503, with high pressure compensation Effect for constant working pressure at all working conditions, the flowmeter enables the adjustment of a certain flow at constant working pressure Body brass chrome-plated pe 200/300 bar pa see below Seals polyamide, EPDM Q see below at pa see below Diaphragm stainless steel de see below da see below Leakage rate 1x10-6mbar l/s B 210 mm H 230 mm Temperature -20 to +60 C T 75 mm M 1,5 kg inlet 200 bar pressure inlet outlet flow range / argon 1,0 6,5 Nl/min. 4,0 bar W21,8x1/14RH nut Klemmring 6 mm ,4-14,0 Nl/min. 1,5 bar ,0-22,0 Nl/min ,6-36,0 Nl/min ,0-95,0 Nl/min. 9,0 bar helium 3,6 34,0 Nl/min. 1,5 bar , 0-65,0 Nl/min nitrogen 0,3-2,0 Nl/min. W24,32x1/14RH ,0-42 Nl/min ,5-85,0 Nl/min. 4,0 bar hydrogen 1,8-18,0 Nl/min. 1,5 bar W21,8x1/14LH ,6-26 Nl/min forming gas 2,0-23,0 Nl/min inlet 300 bar flow inlet outlet Art.-Nr. flow range / argon 1,0 6,5 Nl/min. 4,0 bar W 30x2RH nut Klemmring 6 mm ,4-14,0 Nl/min. 1,5 bar ,0-22,0 Nl/min ,6-36,0 Nl/min ,0-95,0 Nl/min. 9,0 bar helium 3,6 34,0 Nl/min. 1,5 bar , 0-65,0 Nl/min nitrogen 0,3-2,0 Nl/min ,0-42 Nl/min ,5-85,0 Nl/min. 4,0 bar hydrogen 1,8-18,0 Nl/min. 1,5 bar W 30x2LH nut ,6-26 Nl/min forming gas 2,0-23,0 Nl/min LABLINE Pressure regulator Vulkan acc. to ISO 2503 Pressure regulator Vulkan F 15/300 Effect single stage, acc. to ISO 2503, working pressure adjustable 0-1,5 bar Body brass chrome-plated pe 200/300 bar pa 0-1,5 bar Seals polyamide, EPDM Q to 8 Nm³/h at pa 1,5 bar Diaphragm stainless steel de see below da see below Leakage rate 1x10-6mbar l/s B 210 mm H 190 mm Temperature -20 to +60 C T 75 mm M 1,5 kg inlet pressure pressure inlet outlet /argon 200 bar 0-1,5 bar W21,8x1/14RH nut clamp ring 6 mm helium nitrogen W24,32x1/14RH hydrogen W21,8x1/14LH forming gas compr. air G 5/8 RH testing gas M19x1,5LH methane W21,8x1/14LH /argon 300 bar 0-1,5 bar W30x2RH nut clamp ring 6 mm helium nitrogen hydrogen W30x2LH nut forming gas compr. air W30x2RH nut testing gas W30x2LH nut

70 Pressure regulator Vulkan acc. to ISO 2503 LABLINE Pressure regulator Vulkan F 10/2 300 Effect double stage, acc. to ISO 2503, adiabatic compression tested, working pressure adjustable 0-10 bar Body brass chrome-plated pe 200/300 bar pa 0-10 bar Seals polyamide, EPDM Q 48 Nm³/h at pa 10 bar Diaphragm stainless steel de see below da see below Leakage rate 1x10-6mbar l/s B 240 mm H 190 mm Temperature -20 to +60 C T 75 mm M 2,0 kg inlet pressure inlet outlet oxygen 200 bar G3/4RH nut clamp ring 6 mm /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut forming gas compr. air G 5/8 RH testing gas M19x1,5LH nut oxygen 300 bar W30x2RH nut clamp ring 6 mm /argon helium nitrogen hydrogen W30x2LH nut forming gas compr. air W30x2RH nut testing gas W30x2LH nut Pressure regulator Vulkan F 10/2 300 LG Effect double stage, acc. to ISO 2503, for oxygen adiabatic compression tested, for laser gases, as above, but with incorporated purge valve at the low pressure side, with outlet clamp ring VA 6mm and shut off valve in outlet inlet pressure inlet outlet oxygen 200 bar G3/4RH nut clamp ring 6 mm /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut testing gas M19x1,5LH nut oxygen 300 bar W 30x2RH nut clamp ring 6 mm /argon helium nitrogen hydrogen W 30x2LH nut testing gas Pressure regulator Vulkan F 15/2 300 Effect double stage, acc. to ISO 2503, working pressure adjustable 0-1,5 bar Body brass chrome-plated pe 200/300 bar pa 0-1,5 bar Seals polyamide, EPDM Q 8 Nm³/h at pa 1,5 bar Diaphragm stainless steel de see below da see below Leakage rate 1x10-6mbar l/s B 240 mm H 190 mm Temperature -20 to +60 C T 75 mm M 2,0 kg inlet pressure inlet outlet oxygen 200 bar G3/4RH nut clamp ring 6 mm /argon W21,8x1/14RH nut helium nitrogen W24,32x1/14RH nut hydrogen W21,8x1/14LH nut forming gas compr. air G 5/8 RH testing gas M19x1,5LH nut oxygen 300 bar W 30x2RH nut clamp ring 6 mm /argon helium nitrogen hydrogen W 30x2LH nut forming gas compr. air W 30x2RH nut testing gas W 30x2LH nut

71 Safety valve Vulkan to assemble in manifolds or piping systems, according to the Pressure Equipment Directive 97/23/EG it is required to protect the following equipment against possible overpressure, the integrated relief valves in regulators do not fulfil these requirements, acc. to ISO 2503 and ISO 7291 they only protect the regulators themselves, therefore they are not equipment with safety functions acc. to the PED! - not chrome-plated type Connection Pressure range SV 45 G 1/2 RH inert gases/fuel gases 0,5-45 bar and oxygen LABLINE Accessories Vulkan LabLine T-piece for safety valves Vulkan LabLine to incorporate safety valves into manifolds or piping systems, complete chrome-plated type Connection for Hyperventilate TS 12 G 1/2 RH SV Sintered filter Vulkan Labline for high pressure and high flow piping systems, complete assembled with exchangeable filter element type PS connections filter porosity filter material fitting length SFT300 inert gases, fuel gases, oxygen 300 M 24x1,5 RHk nut x M 24x1,5 RHak 45 µm bronce (CuSn12) 94 mm SFT200 inert gases, fuel gases, oxygen 200 G3/4RHi 45 µm bronce (CuSn12) 94 mm Pressure transducer Vulkan to determine the operating pressure and to alert a pressure drop, connection pressure: G 1/4RHaf, Supply voltage: VDC, Outlet signa: 4 20 ma, Cable length 2m type Pressure range Gas Type DT bar oxygen/inert gases DT bar oxygen/inert gases DT 300 ex bar fuel gases DT 20 ex 0-26 bar acetylene T-piece Vulkan LabLine for high pressure, PN 300 bar, to connect pressure guards or pressure transmitters Connection connections G 3/4 RH G 1/4RH acc. to EN M24x1,5 RH G 1/4RH acc. to EN

72 Accessories Vulkan LabLine LABLINE Safety gauge Vulkan LabLine acc. to ISO 5171 with steel body Ø 63 mm Body steel chrome-plated diameter Ø 63 mm Connection brass chrome-plated connection G 1/4 RH Temperature -20 to +60 C acc. to ISO 5171, class 2.5 pressure scale oxygen bar 0 400/300 bar and bar 0 315/200 bar other gases bar 0 160/100 bar bar 0 100/60 bar bar 0 60/40 bar bar 0 40/20 bar bar 0 16/10 bar bar 0 10/6 bar bar 0 6/4 bar ,5 bar 0 4/2,5 bar ,5 bar 0 2,5/1,5 bar bar 0 1,6/1 bar Contact gauge Vulkan acc. to DIN EN in stainless steel body Ø 63 mm with Reed contact, also for ex area Body stainless steel diameter Ø 63 mm Connection stainless steel connection G 1/4 RH Contact Reed type opens with falling pressure Switch flow 10W at DC and 10VA at AC switch hysteresis 1,6%. switch voltage 24 V. switch power 0,4 A Temperature -30 to +75 C acc. to DIN EN 837-1, class 1.6 pressure scale acetylene 0 26 bar 0-40 / 26 bar ,5 bar 0-2,5 / 1,5 bar oxygen bar / 300 bar and bar / 200 bar other gases bar / 100 bar bar 0-60 / 40 bar bar 0-40 / 20 bar bar 0-16 / 10 bar Gauge seals aus from aluminium 11 x 5,5 mm 11 x 5,5 mm thickness packing unit 1,5 mm 20 pieces ,8 mm 40 pieces Connection seals for regulators 200 and 300 bar pressure material packing unit oxygen/ 200 bar fiber material 50 pieces inert gases and polyamide 30 pieces fuel gases copper 2 pieces PTFE 10 pieces acetylene 26 bar rubber 10 pieces testing gas 200 bar fiber material 10 pieces nitrous oxide 80 bar fiber material 10 pieces oxygen 300 bar Viton 10 pieces inert gases and 300 bar Viton 10 pieces fuel gases EPDM 10 pieces Hand tight connections 200 bar LabLine for hoses and regulators, to connect to Cylinder valves, chrome-plated, connections acc. to DIN 477 Connection DIN oxygen G 3/4 RH no nitrogen W 24,32 x 1/14 RH no inert gases W 21,8 x 1/14 RH no fuel gases W 21,8 x 1/14 LH no nitrous oxide G 3/8 RH no testing gas M 19x1,5 LH no