FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2

Transcription

1 FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel L Compact /, High Flow / - / Air service equipment Series FEATURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment and suitable for use in potentially explosive atmosphere caused by gases, vapours, mists and / or dust according to: (ATEX directive 9/9/EC). SAFETY CODE: II GD IIC T C (T), with 9 C ambient temperature II GD IIC T8 C (T), with C ambient temperature (ZONE -) Explosion group IIC Functional Safety: IEC 8, SIL certified Comply with the European Essential Health and Safety Requirements (EN-) All internal metal parts made of / L stainless steel Built-in overpressure relieving function, non-relieving option available L Stainless Steel body, bonnet and bowl Internal springs made of INCONEL to suit sour gas environment complying to NACE MR / ISO * * Only available for High Flow SSFR INCONEL is trademark of the Special Metals Corporation group of companies BENEFITS Precise tuning and regulation - using dual spring design* Improved regulation accuracy - with pitot tube feedback* Longer lifespan - using rolling diaphragm Effective moisture removal - using fin diverters to create centrifugal action* Long lasting label nameplate - with laser etch on stainless steel name plate # * Only available for High Flow SSFR # Only available for Compact SSFR IN OUT CHARACTERISTICS Compact High Flow Fluids Compressed air, neutral gas, Compressed air, neutral gas, natural gas natural gas & sour natural gas Compliance to NACE for Sour Gas Environment No Yes Ports / / & / Threads NPT G as an option Inlet Pressure Range - bar (Manual Drain). - bar (Auto Drain) Regulating Pressure. - bar Regulation By hexagonal head screw with locking nut Hysteresis <. bar <. bar ing Capacity μm & μm Operating Temperature () - o C to +9 o C Low Temperature Option - o C - o C Condensate Drain Manual Manual & Automatic () Operating temperature for Automatic Drain: + o C to + o C IN OUT CONSTRUCTION Body, Bonnet & Bowl ing Element Diaphragm Elastomers Compact High Flow AISI L SS Bowl capacity = cm Bowl capacity = cm AISI SS LT FPM / HNBR FPM API-SSFR-R /R

2 SERIES PRODUCT CODE Product Series Revision Letter A = Initial release F/R/FR Type 8 = SS Regulator (FR) 9 = SS (F) () A = SS Regulator (R) () () Not available for compact version. Pressure Relief/Vent Hole = Non relief diaphragm type ()() = ØM thread () = Ø/8" NPT thread () Other connection on request A 8 AD () Not available for filter. () Automatically for standalone filter option. () Bonnet with Ø /8" NPT thread. Notes:, micron not applicable for standalone regulator. LT option will not be available for AD & AN version. /8" port size for compact SSFR is also available upon request. Standard regulating pressure shall be of.- bar..-. bar is also available upon request. OPTIONS AD = Automatic Drain ()() AN = Automatic Drain with /8" NPT adapter ()() LT = Low Temperature () AD + AN is not a possible combination () Not available for regulator. () For High-Flow SSFR: In combination with pressure gauge, a special low temp SS pressure gauge is delivered. For Compact SSFR: Low temp pressure gauge, please check with ASCO area offices. () Not available for compact version. Filtration/Port Size = High Flow /" NPT µm or Regulator only = High Flow /" G µm or Regulator only = High Flow /" NPT µm or Regulator only = High Flow /" G µm or Regulator only = High Flow /" NPT µm = High Flow /" G µm = High Flow /" NPT µm 8 = High Flow /" G µm 9 = Compact Basic Flow /" NPT µm () A = Compact Basic Flow /" G µm () B = Compact Basic Flow /" NPT µm () C = Compact Basic Flow /" G µm () () Only available in regulator. No standalone filter or regulator. CERTIFICATIONS & APPROVALS = ATEX / Only = ATEX / + CUTR = ATEX / + NACE () = ATEX / + NACE + CUTR () () Not available for compact version. PRESSURE GAUGE & MOUNTING BRACKET OPTIONS SS pressure gauge options are also available. Not mounted on product, separate packaging. Not available for standalone filter. - For High-Flow SSFR & Standalone Regulator: mm Dial Size, /" NPT gauge port (Ordering part number: C) - For Compact SSFR: mm Dial Size, /8" NPT gauge port (Ordering part number: C9) - *For other gauge sizes, material, dial-range, low-temp, etc. requirements, please check with ASCO area offices Mounting Brackets are also available. Not mounted on product, separate packaging. - For High-Flow SSFR, Standalone & Regulator (Ordering part number: C8) - For Compact SSFR (Ordering part number: C8) ORDERING EXAMPLE High-Flow stainless steel filter regulator with pressure gauge & mounting bracket Line item : A8 (High flow, /" NPT, micron stainless steel filter regulator) Line item : C ( mm dial size, /" NPT gauge port pressure gauge) Line item : C8 (L Stainless steel mounting bracket) MAXIMUM FLOW VALUES Compact High Flow Construction Maximum Flow Values Litres Per Minute (ANR) Type Following ISO Standards 8, 8 and 9 / NPT / NPT / NPT μm μm μm μm μm μm Inlet pressure =. bar and P = bar Regulator Inlet pressure = bar, setpoint =. bar and P = bar Regulator Inlet pressure = bar, setpoint =. bar and P = bar 8 8 9

3 SERIES Auto Drain Pressure Gauge Mounting Bracket Max. Inlet Pressure bar Operating Pressure. - bar Operating Temp. C to + C Metal Parts L SS Elastomers FPM Float PP material Adaptor ( SS) for /8 NPT conversion "AN" as option Pressure Diameter Material Protection - bar / - bar Ø (High Flow SSFR) / Ø (Compact SSFR) Fully Stainless Steel IP; Safety glass; Fixed crimped case, to avoid accidental dismounting. Material L Stainless Steel INSTALLATION Installation / Maintenance instructions are included with each filter/regulator Air flow direction indicated by IN/OUT as well as inlet & outlet indicators Pipe connection has standard thread according to NPT (ANSI..) DIMENSIONS(mm), WEIGHT(kg) FILTER F M x DEEP -MOUNT. HOLES REGULATOR THREADED PRESSURE-RELIEF CONNECTION (NON-RELIEF OPTION AVAILABLE) D G C REFER TABLE: PORT SIZE ØD C F REFER TABLE: PORT SIZE ØD M x DEEP -MOUNT. HOLES / NPT PRESSURE GAUGE CONNECTION G H E J AUTO DRAIN SUFFIX-AD MANUAL DRAIN AUTO DRAIN WITH ADAPTER (/8 NPT) SUFFIX-AN A A B FILTER REGULATOR B MOUNTING BRACKET

4 DIMENSIONS(mm), WEIGHT(kg) HIGH FLOW Type Regulator Regulator ØD Weight A B C D E F G H J (kg) NPT /..... Ø / /.98 /... Ø COMPACT Regulator /. 9 N/A N/A Ø8 SPARE PARTS KITS HIGH FLOW / Ø COMPACT / Type SERIES ing Spare Parts Capacity Kit Number μm C9 μm C Regulator - C Regulator Regulator μm C μm C μm C9 μm C9 Option Weight (kg) Auto Drain. Adapter for Auto Drain. Pressure Gauge. Mounting Bracket.9 PRESSURE DROP vs. AIR FLOW CURVES St. steel filter / NPT Ref. : A9 Filtration µm with P inlet bar St. steel filter / NPT Ref. : A9 Filtration µm with P inlet bar 9 8 (ANR) 8 (ANR) Pi=bar Pi=.bar 8 Pi=bar dm /s Pi=bar 8 Pi=.bar Pi=bar dm /s St. steel filter / NPT Ref. : A9 Filtration µm with P inlet bar Pi=bar Pi=.bar Pi=bar (ANR) St. steel filter / NPT Ref. : A9 Filtration µm with P inlet bar Pi=bar Pi=.bar Pi=bar (ANR) 8 dm /s 8 dm /s

5 SERIES 9 8 St. steel regulator / NPT Ref. : AA P inlet b - setpoint bar 8(ANR) bar 8 bar. bar 8 9 dm /s 9 8 St. steel regulator / NPT Ref. : AA P inlet b - setpoint bar bar 8 8 bar. bar (ANR) dm /s St. steel filter regulator / NPT Ref : A8 Filtration μm with P inlet b - setpoint bar bar. bar. bar St. steel filter regulator / NPT Ref. : A8 Filtration μm with P inlet b - setpoint bar (ANR) (ANR). bar. bar bar 8 9 dm /s dm /s St. steel filter regulator / NPT Ref : A8 Filtration μm with P inlet b - setpoint bar. bar. bar bar St. steel filter regulator / NPT Ref. : A8 Filtration μm with P inlet b - setpoint bar. bar. bar 9 8 (ANR) (ANR) bar 8 9 dm /s dm /s

6 St. steel filter regulator / NPT Ref : A8B Filtration μm with P inlet b - setpoint bar. bar bar. bar SERIES St. steel filter regulator / NPT Ref. : A89 Filtration μm with P inlet b - setpoint bar. bar 8 (ANR) (ANR) bar. bar dm /s dm /s /R Availability, design and specifications are subject to change without notice. All rights reserved.