84 3-in-1 Rotating Table Air Powered Hockey, Billiards, Table Tennis

Transcription

1 Item# in-1 Rotating Table Air Powered Hockey, Billiards, Table Tennis Please keep this instruction manual for future reference If you have any problems with your new product, please contact Triumph Sports USA at , or us at for any technical support or warranty issues.

2 90-Day Triumph Sports USA, Inc. (TSU) Game Warranty All TSU games have a 90-day from date of purchase warranty. This warrants the retail purchaser for any TSU game purchased to be free from any defect in materials and construction for 90 days from the date of purchase. Normal play wear and usage is not covered under the warranty, nor is wear or damage due to improper use of the TSU game. This will void any and all TSU warranties. A PURCHASE RECEIPT (or other proof of purchase date) will be required before any warranty service is initiated. All requests for warranty service can be submitted by , in writing or by contacting our Customer Service Department at: or us at csr@triumphsportsusa.com. IMPORTANT NOTICE! Please contact us before returning the product to the store. Warnings WARNING:Choking Hazard--Toy contains small balls and/or small parts. Not for children under 3 years of age. WARNING: Rotating the game should be done under adult supervision. Rotating table may cause a pinching hazard for young children and pets. Please exercise caution. At least two adults are needed to put this game table together. Triumph Sports USA Milwaukee, WI Triumph Sports USA. All Rights Reserved.

3 Parts List Cabinet for Billiards 1EA Cabinet for Hockey 1EA 8 9 Apron End Board Left 10 Apron End Board Right Leg Brace Long Side Right Leg Left Leg End Panel -Inner End Panel Outer Ball Tray - End Apron Cabinet Side End Rail - Top Puck Goal Panel 4EA 20 Puck Goal Panel - Bottom 21 Frame Support 4EA 22 Table Tennis Top Support 23 Table Tennis Top Center 1EA 24 Table Tennis Top - End Cup Holder Leg Leveler 4EA Knob Receiver 4EA Pusher Hockey Puck Pusher Felt Chalk Billiard Balls 1SET Brush 1EA Triangle Rack 1EA 2-Pc Billiard Cue Net 1EA Post Table Tennis Paddle Table Tennis Ball Table Tennis Top Cushion 8EA Locking Knob 4EA Bolt Allen 6x32mm 4EA

4 Parts List Bolt Allen 6x25mm Washer 6x19mm 1 45 Washer 6x15mm 4 EA 46 Bolt Allen 8x38mm 16EA 47 Washer 8x19mm 16EA 48 Screw Wood 4x18mm 16EA Screw Wood 4x44.5mm 28EA Screw Wood 4x32mm 28EA Screw- Wood 4x18mm 1 Bolt Hex 20mm (Pre-assembled) Nut Metal 20mm ( Pre-assembled) Washer Medal 20mm (3EA Pre-assembled) 3EA Allen Wrench 1EA Hex Wrench 1EA Assembly Tips: If you are using an electric screw driver in assembly, please set at low torque and do not over tighten the hardware.when assembling individual parts, loosely tighten screws until all screws are inserted,then tighten completely.

5 Assembly Instructions NOTE: We recommend that two adults work together to assemble this game. Open the carton of your new table game near where you will play. Select a clear level area. Step 1 Remove all the contents from inside the carton and verify that you have all listed parts as shown on the parts list. 44 NOTE:Parts are packed inside the table cabinet. Remove the 15 Hockey table surface (#2), inside the table cabinet you will find all the parts needed to assemble 44 your table. Attach pool table support frame (#15) to the main 1 frame by using screws (#44). 44 Step 2 Route the power cord connector through the holes on the frame, and connect the power cord together. Fan 2 1

6 Step 3 Place hockey frame (2) onto billiard cabinet (1), attach hockey frame to billiard cabinet by using screw (#44). 2 Fan Step 4 Assemble the leg brace (5) by screwing the left apron - end board (#3) and the right apron-end board (#4) to each end of the leg brace (5) with screw (#43). Repeat the step for the other side Inside Outside

7 Step 5 Attach left (#7) and right (#6) legs to assembled leg brace using bolts (#40) and washers (#41) with Allen Wrench (#49). Screw the leg levelers (#20) into each leg. Repeat the step for the other side Step 6 Screw 2 knob receivers (#21) into predrilled holes of end panel - inner (#8) with screws (#42). Repeat the step on the other side

8 Step 7 Attach the ball tray (#10) with screws (#43) into predrilled holes. Repeat the step on the other side Step 8 Attached two goal panels (#13) to the end panel - outer (#9) with bolt (#36) and washers (#39). Attached the goal panels bottom (#14) to two goal panels (#13) with screw (#42). Repeat the step on the other side Step 9 Attach the assembled pieces (step 7 and step 8) together with screws (#43). 43 Completed View

9 Step 10 Attach assembled end panel (step 9) to the legs using 2 bolts (#37) and 2 washers (#38) through the two predrilled holes on outer end panel (#9); then using 2 bolts (#40) and 2 washers (#41) to attach inner end panel (#8) to the leg. Attach the lower part of the assembly to the leg using bolt (#37) and washer (#38). Repeat the step on the other side Step NOTE: This Side PRE-ASSEMBLED Preparing the table top for mounting. The threaded shaft in the billiard cabinet (#1) cannot be removed, be sure to pull it out as far as possible, about 2 to 3 inches on each side. Attach washer (#48) and nut (#47) onto the bolt (#46) on both ends. Hand tighten nut (#47) to the bolt (#46) until the nut is snug to the cabinet. Slide 2 more washers (#48) on each side. Then loosely attach nut (#47) on the end of the bolt (#46)

10 Step 12 You are now ready to place the assembly (#1 and #2) onto the base frame. With the help of a few friends, have two people on each side of the table top, and the other on the end to help guide the bolt (#46). To securer the table top to the leg panel use the wrench (#50) provided. Firmly tighten each of the 1/2 bolt (#46) on each side of the leg panel towards each other. This will lock the table top to the base frame and still allow the table top to spin freely. Goal Panel-Bottom-Hole Table top 48 End Panel Top View of Proper Swivel Bolt and Washer Placement.

11 Step 13 Slide cabinet side apron (#11) into side of the table top. 11 Step 14 Attach end rail (#12) to the assembled end panel with screws (#45) Shows View from Inside

12 Step 15 Attach cup holder (#19) to the assembled end panel. 19 Step 16 Use locking knob (#35) to secure the table top. 35

13 Step 17 Place two table tennis top -support (#16) on the center of the hockey table surface. Place the 3-pc table tennis top (#17 and #18) on the table top. Attach net post (#31) to the middle board (#17), slide table tennis net (#30) onto the post. WARNING: Table Tennis top must be removed before rotating table top! Hockey Pusher 24 Attach pusher felt to pusher before playing hockey game Table Tennis Top

14 Game Rules BILLIARDS: In the course of play, a player must call each shot in advance, by indicating the ball to be made and the pocket into which it will be made. It is not necessary to indicate details such as cushions, banks, caroms, etc. Failure to make the shot as called results in a loss of turn. If the shot is made as called, then any other balls pocketed remain pocketed. However, if the called shot is not made and any other balls are pocketed, then the shooter's ball(s) that were pocketed would be spotted and any of the opponent's balls would remain pocketed. In order to execute a Legal Shot, the first ball hit must be one of the balls in the shooter's group (stripes or solids) and the object ball must be pocketed or the cue ball or any object ball must come into contact with a rail. (Note: It is legal for the shooter to bank the cue ball off a rail before hitting the object ball.) A player who legally pockets a ball continues play until missing or committing a Foul. Once a player's ball group (stripes or solids) is pocketed, the player may play the 8 ball. Again, the player must clearly indicate the intended pocket, even if it appears obvious. A player who legally pockets all of his ball group and the 8 ball is the winner. FOULS 1. Failure to execute a legal shot as defined above. 2. A scratch shot (shooting the cue ball into a pocket or off the table) 3. Moving or touching any ball by means other than legal play. 4. Shooting an intentional jump shot over another ball by scooping the cue stick under the cue ball. (A jump shot executed by striking the cue ball above center is legal.) 5. Using the 8 ball first in a combination shot when the table is not open.

15 Game Rules AIR POWERED HOCKEY: 1. This game is designed to be played with two (2) players, one at each end, or with four (4) players, two at each end of the game table. 2. Play begins when the puck is placed on the playing surface. Players must hit the puck with the hand-held pushers and attempt to shoot into the opponent s goal. 3. One point is given when a puck is shot into the opponent s goal. 4. Winning: the winning goal is accomplished by being the first player to reach a predetermined score or by being the player to score the most points within a given period.

16 Game Rules TABLE TENNIS: In singles, the server first makes a good service and then the receiver makes a good return. Thereafter, server and receiver alternately each make a good return. In doubles, the server first makes a good service and the receiver returns the ball. Then the partner of the server makes a good return, followed by the partner of the receiver returning the ball. Thereafter, each player alternately in that sequence makes a good return. Serving After hitting it, the ball must first touch the server's own court and pass directly over the net or around the net assembly, then touching the receiver's court. In doubles, the ball must first touch the server's right half-court or center line, pass over the net, and then touch the receiver's right half-court or center line. If, in attempting to serve, a player fails to strike the ball while it is in play, he loses a point. Return After the ball is served or returned in play, it is struck so that it passes directly over the net and its assembly and touches the opponent's court. A returned ball which touches the net or its supports on the way over to the other side, is considered a good return. The ball is in play from the last moment at which it is stationary on the palm of the server's free hand before being projected in service until: -- a point is scored. -- it touches the same court twice consecutively. -- it has been volleyed. -- it touches a player, or anything he wears or carries, other than his racket or his racket hand below his wrist. -- it touches any object other than the net or its support (referred to above). -- it is struck by a player more than once consecutively. -- it touches, in a doubles service, the left half-court of the server or receiver. -- it is struck, in doubles, by a player out of sequence, except where there has been a genuine error in playing order.