Table of Contents. User s Guide. Distributor Information. Price Information III. Revision Record. Foreword. Subject Index.

Transcription

1 Index of Technical Publications Jully January 2013 July 2012

2 Table of Contents User s Guide Distributor Information Price Information Revision Record Foreword I II III IV V Subject Index AGS Standards 1 AS Standards 19 ESC Standards 84 RS Standards 86 TS Standards 93 Numerical Index of Cancelled Standards 108

3 User s Guide The Index of ADS Standards and Technical Specifications is your guide to locate a specific published Standard or Specification. The documents are grouped by type and are in numerical order e.g. AGS, AS, ESC, RS and TS. The term Standard shall be used throughout this document to mean Standard, Specification or Reference Sheet as applicable. The list provides the following information: Reference: ADS Standard number Title: Title of Standard Edition: Edition (Issue) of the published document Pages: Number of pages in the document Status: Status of the Standard I = Inactive or Obsolete A = Active Price: Price per copy of the Standard All ADS Technical Publications are available individually or as a set from the five distributors as shown on the next page under Distributor Information. The complete price list is detailed on Page III of this guide.

4 Price Information Price for the complete ADS Collection on CD-ROM Purchase of an ADS technical publications CD - ROM includes a perpetual (ongoing) licence for that company. The pricing policy for the CD ROMS of ADS Standards is as follows: 1 x CD of ADS Technical publications to a non networked workstation: 3,750 ( 2,500). For additional non networked workstation: 375 ( 250). Thus for one company wishing to use the CD on 2 workstations the price will be 3,750 / 2,500 + (1 x 375 / 250) = 4125 ( 2750). For a company wishing to use the CD on 10 workstations the price will be 3,750 / 2,500 + (9 x 375 / 250) = 6135 ( 4750). A CD contains all Active and Inactive Standards (AS, AGS, RS and ESC) together with the complete current range of Technical Specifications (TS). It also contains an updated version of this ADS Standards and Technical Specifications Index (updated every 6 months), which includes a list of all Cancelled Drawings and a Record of all Technical Specifications. It will also hold a file of the Cancelled Drawings during the previous six month period and the ADS Foreword. Networking of the ADS Standards CD between 3 to10 computers will be 7,250 ( 5,000) including the cost of updates for the first year. Thereafter 2,175 ( 1,500) per annum. For a network containing more than 10 computers please consult ADS for pricing. The CD will be revised at 6 monthly intervals at a cost of 375 ( 250) per revision. All ADS Technical Publications are published under copyright and cannot be reproduced. Price for Individual Standards and Specifications Individual Standards are available at the following costs: Sheets Sheets For payment details and further information please contact the relevant distributor, see page II

5 Revision Record Revision Date October 2009 January 2010 July 2010 January 2011 Changes Replacement of SBAC & Logo with A D S & new Logo. SBAC / DMA merger information shown in Foreword. Status / price update of AGS2035, AGS2088, AGS2090, AGS2092, AGS2094, AGS3441, AGS3442, AS4526, AS5419, RS681, TS66, TS154, TS155 &TS260. Inclusion of missing standards AS6228 to AS6287, AS25370 & AS Number correction AS Inclusion of TS docs in list of Cancelled Standards. Removal of Master Record of Technical Specifications no longer required. General typographical changes. Section title page colour change. Replacement of A D S Logo with corrected version. Status / Price update of AS46771, AS46772, TS201, TS202. Inclusion of Amendment Record (AR) AS46771-AR, AS46772-AR. Page 82 AR amended, was AS now AR AS43021 Issue 2 was AS43021 Issue 1 AS43021 Title change now Nut, Union-Female, Metric Pipe Series was Nut, Union AS43021-AR Issue 2 added at Page 74 TS201 and TS202 amended to read No charge on ADS website. Numerical Index of Cancelled Standards, AS now A was C Page II Thomson Reuters Techstreet plus contact details added. Page 78, AS Issue 7 was AS Issue 6 AS44750-AR added at Issue 7. Page 87, AS amended, was AS now AS AS Issue 5 was AS Issue 4 AS63420-AR Issue 5 added AS Issue 4 was AS Issue 3 AS63476-AR added at Issue 4 Page 88, Full details added for the following References: AS65110, AS65111, AS65112 and AS Page 88, AS65000 Issue 2 was AS65000 Issue 1 AS65000-AR added at Issue 2 Page 104, TS200 Issue 35 was TS200 Issue 33 TS200-AR Issue 3 was TS200-AR Issue 1 TS201 Issue 5 was TS201 Issue 4

6 Jan 2012 July 12 TS201-AR Issue 5 was TS201-AR Issue 4 TS202 Issue12 was TS202 Issue 11 TS202-AR Issue 5 was TS202-AR Issue 4 Replacement of A D S to ADS and logo due to Brand change, whole document. Page 48 AS5419 Issue 8 was AS5419 Issue 7 Page 60 AS12800 Issue 6 was AS12800 Issue 5 AS12801 Issue 6 was AS12801 Issue 5 Page 84 AS65000 Issue 3 was AS65000 Issue 2 AS65000-AR Issue 3 was AS65000-AR Issue 2 AS65010 Issue 2 was AS65010 Issue 1 AS65010-AR Issue 2 added Page 86 ESC76 Issue 5 was ESC76 Issue 4 ESC76-AR Issue 5 added Page 95 TS24 Issue 6 was TS24 Issue 5 change due to typo error. Page 98 TS200 Issue 36 was TS200 Issue 35 Page 99 TS200-AR Issue 4, 5 Pages was TS200-AR Issue 3, 4 Pages Page 47 AS5419-AR Issue 8 added no previous issues. Page 60 AS12800-AR Issue 6 added no previous issues. AS12801-AR Issue 6 added no previous issues. Page 66 AS Issue 5 was AS Issue 4 AS26080-AR Issue 5 added no previous issue. AS Issue 6 was AS Issue 5 AS26080-AR Issue 6 was AS26080-AR issue 5 Page 70 AS Issue 6 was AS Issue 5 AS41100-AR Issue 1 added no previous issues. Page 73 AS44445 Issue 10 was AS44445 Issue 9 AS44445-AR Issue 10 added no previous issues. AS Issue 3 was AS Issue 2 AS44691-AR Issue 3 added no previous issue. Page 98 TS200 Issue 37 was TS200 issue 36 Page 99 TS200-AR Issue 5 was TS200-AR Issue 4

7 ADS AEROSPACE INDUSTRY STANDARDS FOREWORD ADS was formed by the merger of the Society of British Aerospace Companies (SBAC), the Defence Manufacturers Association (DMA) and the Association of Police and Public Security Suppliers (APPSS) on 1 st October 2009 to promote Advancing the UK Aerospace, Defence and Security Industries. The legal obligations and copyright authority of all standards issued by SBAC are therefore assigned / transferred to ADS Group Limited. ADS is a non-profit making body made up of members from the Aerospace, Defence Manufacturers and Security Industries. These Standards are produced by ADS with the assistance of, and for the benefit of the Aerospace Industry as part of a continuous programme of Standardisation for Aerospace application under the control of the Technical Standards Committee of ADS. ADS Standards are published as part of the series of ADS Aerospace Industry Standards, and where appropriate, additional manufacturing and inspection requirements are issued as Reference Sheets (RS) or Technical Specifications (TS). It is the responsibility of those using or specifying a Standard to ensure that the product, process or manufacturer so used or specified is appropriate for the task or role in question. ADS wishes to draw special attention to the fact that Technical Specifications (TS) include testing and procedures by which a user or Design Authority can establish whether a particular manufacturer, prima facie, has the capability to produce hardware in accordance with the appropriate drawings and related specifications. ADS, its servants or representatives accept no responsibility for the continued quality of hardware items produced against the relevant drawings and specifications, this responsibility remains with the user. Whilst ADS takes all reasonable care in the preparation of all Standards, neither ADS, its officers, employees, servants, agents or representatives shall have any responsibility or liability whatsoever with respect to any act or omission (whether negligent or not) of whatsoever nature of, or in connection with, the preparation of the Standards or any part thereof. These responsibilities are those of the user or Design Authority. Users of ADS Standards agree that any such liability on the part of ADS is excluded to the maximum extent permitted by law. ADS Standards may be changed from time to time, and both users and manufacturers of these parts should ensure that they are in possession of the latest issue of the Standards and supporting documentation before adoption or the commencement of production. It is recommended that TS260, Metallic Materials List of Alternative Material Standards be consulted prior to manufacture of ADS products. Each Standard sheet in the series is a photographic or electronic reproduction of a master drawing and references to scales are not necessarily correct. A Master Index to all of these Standards is published separately. All references to Standards include reference to RS and TS publications. Details of this and any further information can be obtained from ADS. ADS Group Limited Registered in England and Wales no ADS Group Limited. The information in this document is copyright and the property of ADS Group Ltd. It shall not be copied, or communicated to a third party, or used, for any purpose other than that for which it is supplied without the express written consent of ADS Group Limited.

8 AGS Specifications 1

9 AGS1 Procedure for the establishment of standards for proprietary items. AGS100 AGS Design Notes (The requirements of this AGS are now embodied on A D S Reference Sheet RS 700 and drawing reference to AGS100 should be taken as reference to RS700 ). 7 1 A AGS113 B.A. Wing Nuts (Brass) 15 1 A AGS120 B.S.F. Wing Nuts (Brass) 16 1 A AGS154 Wire Locking Rings 6 1 A AGS157 Washers: Special (Aluminium Alloy) 13 1 A AGS159 Repair Bolts for De-Bergue Riveted Tanks 8 2 A AGS160 Bright Washers (Steel) 19 1 A AGS161 Special Bright (Steel) Washers 13 1 A AGS162 Single Spring Washers 11 1 A AGS163 Double Spring Washers 11 1 A AGS164 Round Jointing Washers (Hard Fibre) 14 1 A AGS165 Wire Locking Rings 5 1 A AGS166 Standards Split Pins 8 1 A AGS194 Straight Tab Lockwashers (Steel) 12 1 A AGS195 Angle Tab Lockwashers (Steel) 15 1 A AGS207 Union Lock Nuts (Steel) 12 1 A AGS209 Standard Conical Nipples (for superceded items see AGS1101) 19 1 A AGS216 Plugs, Flanged (Brass) 18 1 A AGS224 Union Lock Nuts (Brass) 12 1 A AGS232 Assembly of Eyelets 12 4 A AGS250 Standard Countersunk Woodscrews 10 1 A AGS251 Standard Countersunk-Head Woodscrews 11 1 A AGS252 Standard Round-Head Woodscrews 10 1 A AGS253 Standard Round-Head Woodscrews 10 1 A AGS385 Ball Joint Assembly 20 4 A AGS501 Rivets (Tubular) 12 3 A AGS511 Ballast Weights (Grey Cast Iron) 2 1 A AGS513 Rivets (Tubular Split) Flat Head, Light Alloy 3 1 A AGS514 Rivets (Tubular Split) Flat Head, Mild Alloy 4 1 A AGS515 Rivets (Tubular Split) Cone Head, Light Alloy 3 1 A AGS516 Rivets (Tubular Split) Cone Head, Mild Alloy 4 1 A AGS519 Protective Rubber Caps for Heat Exchange Equipment 4 1 A AGS560 Disconnector for operating Head Type F. for emergency Dinghies 2 4 I AGS565 Plugs (Brass) 12 2 I AGS566 Plugs, (Aluminium Alloy) 16 2 I AGS567 Jointing Washers Thin, (Hard Fibre) 9 1 A AGS568 Jointing Washers (Aluminium) 5 1 A AGS571 Bolts, Shear 6 1 I

10 AGS572 Nuts - Thin Slotted and Plain 4 2 I AGS575 Screwed Rod (S.I.) AGS576 Screwed Rod (Light Alloy) 4 1 I AGS581 Olives for Copper Pipe Connections AGS582 Frames Inspection (Woods Type) x A AGS583 Frames Inspection (Woods Type) 4 x A AGS584 Clip for Detachable Pipe Line 9 1 A AGS585 Single Spring Washers (Thin Type) 5 1 I AGS586 Double Spring Washers (Thin Type) AGS589 3 / 8 B.S.F. Rod End Bearing, Internal Thread, (Short) Assembly 12 3 A AGS590 Rod End Bearing - Plain Shank Assembly 9 2 A AGS591 AGS592 AGS593 5 / 16 B.S.F. Rod End Bearing, External Thread Assembly 9 2 A / 8 B.S.F Rod End Bearing, Internal Thread (Long) Assembly 10 2 A / 16 B.S.F. Rod End Bearing, Internal Thread, (Short) Assembly 10 2 A AGS595 Plug, Dust Protection, Metal, B.S.P.F. 9 1 A AGS596 Cap Protection - Deep Drawn, Metal B.S.P.F. 5 1 A AGS597 Cap Protection - Shallow Drawn, Metal B.S.P.F. 5 1 A AGS600 Standard Petrol Filter (N 1 size) 11 1 I AGS601 Standard Petrol Filter (N 2 size) 11 1 I AGS602 Standard Petrol Filter (N 3 size) 9 1 I AGS604 Petrol Filter Details I AGS605 Clip - Hose (Type J) Assembly 12 6 I AGS606 Assembly of Hose Clip 19 5 I AGS607 Filler Cap 16 1 I AGS608 Filler Seating (Flange Type) 9 1 I AGS609 Alternative Filler Seating (Ring Type for Necks) 9 1 I AGS610 Details & Assembly of Petrol & Water Strainers 6 3 I AGS626 Reducing Union Body (Brass) 20 1 I AGS627 Double Ended Union Body (Brass) 2 AGS628 Reducing Plug 10 1 I AGS629 Female Flanges (Brass) 17 2 I AGS630 Special Female Flanges (Brass) 15 2 I AGS639 Olive Joint Adapters 8 1 I AGS666 Pulleys for Main and Engine Controls 8 2 I AGS676 G.A. of ¼ Bore Drain Cock (No. 1 size) Assembly 17 7 I AGS677 G.A. of ½ Bore Drain Cock (No. 2 size) Assembly 16 7 I AGS711 Metal Couplings Outer Sleeve (Brass) 17 2 I AGS712 Metal Couplings Inner Sleeve (Brass) 14 4 I AGS762 B.A. Nuts (Light Alloy) 9 1 I AGS765 B.A. Bolts (Light Alloy) 8 1 I AGS771 ⅜ B.S.F. Eye Bolt 5 1 I AGS784 Split Pins - Non-corrodible 12 1 I

11 AGS796 4 B.A. Eyebolt 5 1 I AGS797 2" B.A. Eyebolt 5 1 I AGS798 ¼" B.A. Eyebolt 5 1 I AGS799 AGS800 5 / 16 B.A. Eyebolt 5 1 I / 16 " B.S.F. Eyebolt 5 1 I AGS801 ½" B.S.F. Eyebolt 5 1 I AGS803 ⅝" B.S.F. Eyebolt 5 1 I AGS838 Assembly of Mark1 Low Pressure Unions for 5 / 16 DIA. Tubing A AGS839 Thermometer Washer (Copper) 3 1 A AGS840 Drainage Hole Eyelets 4 1 A AGS858 Countersunk Woodscrews for Securing Sheaths to Wooden Airscrews 4 1 I AGS859 Taper Pins (Stainless Steel) 2 1 I AGS883 4" B.A. Studs 5 1 I AGS884 2" B.A. Studs 5 1 I AGS885 ¼" B.F.S. Studs 5 1 I AGS886 5 / 16 B.F.S. Studs 5 1 I AGS887 ⅜" B.F.S. Studs 5 1 I AGS888 Drain Cock 5 1 I AGS889 Drainage Hole Eyelets (Marine type) 4 1 A AGS893 Standard Countersunk-Head Woodscrews AGS894 Standard Round-Head Woodscrews AGS895 Clip for Spearing Tubes 4 1 I AGS897 Ferrules, Steel Wire for Elastic Cord 4 1 I AGS899 Collars (Mild Steel) 5 1 I AGS900 Assembly of Metal Couplings (Aluminium Alloy) 5 / 16 Light Type for Automatic Controls only 20 6 A AGS904 Pipe Couplings, (Aluminium Alloy), Outer Sleeve 27 4 A AGS905 Pipe Couplings, (Aluminium Alloy), Inner Sleeve 25 4 A AGS908 Reducing Union Body (Light Alloy) 9 1 I AGS910 Lubrication Nipple 7 1 I AGS920 Ferrules (non-corrodible) for Screwed Rod AGS921 Screwed Rod (non-corrodible) AGS934 Ferrules (Plated) for Screwed Rod 4 1 I AGS935 Screwed Rod (Plated) 5 1 I AGS937 R.A.E. Petrol Filters, Shallow Sump Type 12 2 I AGS939 R.A.E. Petrol Filters I AGS946 Bright Washers (Steel, Non-corrodible) 4 1 I AGS947 Special Bright Washers (Steel, Non-corrodible) 4 1 I AGS948 Plugs Flanged (Aluminium Alloy) 16 2 A AGS949 Double Ended Union Body (Steel) 17 2 A AGS950 Metal Couplings reducing Union Body (Steel) 16 2 A AGS952 Pipe Couplings Collar 18 1 A

12 AGS954 Metal Couplings (Steel), Outer Sleeve 17 2 A AGS955 Metal Couplings (Steel), Inner Sleeve 19 3 A AGS957 Union Lock Nuts (Light Alloy) 6 1 I AGS958 Female Flanges (Light Alloy) 11 2 I AGS959 Special Female Flanges (Light Alloy) 11 2 I AGS963 Oil Thermometer Pocket, ⅞ B.S. Pipe 9 3 I AGS964 Oil Thermometer Pocket, 1¼ B.S. Pipe 9 3 I AGS965 Oil Thermometer Pocket, 1½ B.S. Pipe 8 6 I AGS966 Cock (No. 2 Size) with Diffuser 7 1 I AGS970 Washers (Aluminium Alloy) 7 1 I AGS974 Oil Thermometer Pocket ⅜" B.S. Pipe 8 3 I AGS977 Male Flanges (Bolted) (Aluminium Alloy) 10 2 A AGS978 Male Flanges (Bolted) (Steel) 9 2 A AGS980 Female Flanges (Bolted) (Aluminium Alloy) 6 2 A AGS981 Female Flanges (Bolted) (Steel) 5 2 A AGS986 Female Flanges (Bolted) with Spigot (Aluminium Alloy) 6 2 A AGS987 Female, Flanges (Bolted) with Spigot (Steel) 6 2 A AGS995 Studs 2 B.A. High Duty 2 1 A AGS996 Studs ¼" B.S.F. High Duty AGS997 Studs 3 / 16 " B.S.F. High Duty 2 1 I AGS998 Studs ⅜" B.S.F. High Duty 2 1 I AGS1000 Clip - Hose, Type S. General Arrangement 4 9 I AGS1001 R.A.E. Petrol Filter (200 G.P.H. Shallow Sump Type) 9 1 I AGS1002 R.A.E. Petrol Filter I AGS1010 Standard Compressed Air Bottle Assemblies 3 2 I AGS1011 Standard Compressed Air Bottle Details 4 5 I AGS1100 Pipe Couplings, Typical Joints 4 13 A AGS1101 Pipe Couplings, Arrangement of Pipe Joints 13 4 A AGS1102 Pipe Couplings (Aluminium Alloy), Cone Union Body 3 / 16 to ½ 15 2 A AGS1103 Pipe Couplings (Aluminium Alloy), Union Body 3 / 16 to 2½ 15 2 A AGS1104 Pipe Couplings (Aluminium Alloy), Cone Adaptor 3 / 16 to ½ 17 2 A AGS1105 Pipe Couplings (Aluminium Alloy), Union Adaptor 3 / 16 to ½ 16 2 A AGS1106 Pipe Couplings (Aluminium Alloy), Union Body (Cone to Nipple type) 15 2 A AGS1107 Pipe Couplings (Aluminium Alloy), reducing Cone Union 15 2 A AGS1108 Pipe Couplings (Aluminium Alloy), Reducing Union (Cone to Nipple type) 16 2 A AGS1109 Pipe Couplings (Aluminium Alloy), Reducing Union 17 2 A AGS1110 Pipe Couplings arrangement of Flanged Bulkhead Union Bodies 4 1 A AGS1111 Pipe Couplings (Aluminium Alloy), Flanged Bulkhead Cone Union Body 3 / 16 to ½ 13 2 A AGS1112 Pipe Couplings (Aluminium Alloy), Flanged Bulkhead Union Body 3 / 16 to ½ 13 2 A

13 AGS1113 Pipe Couplings (Aluminium Alloy), Flanged Bulkhead Union Body (Cone to Nipple type) 13 2 A AGS1114 Pipe Couplings (Alum m Alloy), Flanged Bulkhead Screwed Sleeve 12 2 A AGS1115 Pipe Couplings, Washer Plates for Flanged Bulkhead Fittings 3 1 A AGS1116 Pipe Couplings (Aluminium Alloy), Cone Elbow 3 / 16 to ½ 13 2 A AGS1117 Pipe Couplings (Aluminium Alloy), Union Elbow ⅝ to 1½ 12 2 A AGS1118 Pipe Couplings (Aluminium Alloy), Cone Tee 3 / 16 to ½ 13 2 A AGS1119 Pipe Couplings (Aluminium Alloy), Union Tee ⅝ to 1½ 12 2 A AGS1120 Pipe Couplings (Aluminium Alloy), Cone Tee (Unequal) 13 3 A AGS1121 Pipe Couplings (Aluminium Alloy), Union Tee (Unequal) 11 3 A AGS1122 Pipe Couplings (Aluminium Alloy), Cone & Nipple Tees (Unequal) 13 2 A AGS1123 Pipe Couplings (Aluminium Alloy), Cone 4 Way Piece 3 / 16 to ½ 13 2 A AGS1124 Pipe Couplings (Aluminium Alloy), Cone 4 Way Piece ⅝ to 1½ 12 2 A AGS1125 Pipe Couplings (Aluminium Alloy), Cone 4 Way Piece (Unequal) 10 2 A AGS1126 Pipe, Couplings (Aluminium Alloy), Union 4 Way Piece (Unequal) 10 2 A AGS1128 Pipe Couplings. Arrangement of Cone Banjo s Assembly 7 6 A AGS1129 Pipe Couplings (Alum m Alloy) Single End Cone Banjo Body 3 / 16 to ½ AGS1130 Pipe Couplings (Alum m Alloy) Double End Cone Banjo Body 3 / 16 to ½ AGS1131 Pipe Couplings (Alum m Alloy) Double R.A. Cone Banjo Body 3 / 16 to ½ AGS1132 Pipe Couplings (Alum m Alloy) Single End Union Banjo Body 3 / 16 to 1 AGS1133 Pipe Couplings (Alum m Alloy) Double End Union Banjo Body 3 / 16 to 1 AGS1134 Pipe Couplings (Alum m Alloy) Double R.A. Union Banjo Body 3 / 16 to A A A A A A AGS1135 Pipe Couplings (for Alum m Alloy Range) Banjo Bolt ( 3 / 16 to 1 ) 8 2 A AGS1136 AGS1137 Pipe Couplings (for Alum m Alloy Range) Banjo Bolt with Cone Head Connection Pipe Couplings (for Alum m Alloy Range) Banjo Bolt with Union Head Connection A AGS1138 Pipe Couplings Jointing Washers (Aluminium) 8 1 A AGS1139 Pipe Couplings Jointing Washers (Copper) 10 1 A AGS1140 Pipe Couplings Nipple Plugs ( 3 / 16 to ½ ) 12 2 A AGS1142 Pipe Couplings Adaptor Nipple 1 AGS1143 Pipe Couplings Cone Plugs ( 3 / 16 to 1½ ) 16 2 A AGS1144 Arrangement of Hexagon Bulkhead Unions 3 1 A AGS1145 Pipe Couplings (Aluminium Alloy), Hexagon Bulkhead Cone 17 2 A Union Body ( 3 / 16 to ½ ) AGS1146 Pipe Couplings (Aluminium Alloy), Hexagon Bulkhead Cone 15 2 A Union Body ( 3 / 16 to 1½ ) AGS1147 Pipe Couplings (Aluminium Alloy), Hexagon Bulkhead Union Body 17 2 A ( 3 / 16 to ½ ) AGS1148 Pipe Couplings (Aluminium Alloy), Thin Nuts ( 3 / 16 to 1½ ) 10 1 A AGS1149 Pipe Couplings, Washer Plates for Hexagon Bulkhead Fittings 4 1 A

14 AGS1153 End Connection for Self Sealing Fuel Hose End Cap AGS1160 End Connection (Straight) for Flexatex Fuel Hose. General Arrangement 2 1 I AGS1162 End Connection for Flexatex Fuel Hose, Type C7 2 1 I AGS1163 Pipe Couplings Cone End Union Piece (Corrugated) 5 2 I AGS1164 T Adaptor (for Fuel Tank Fire Extinguisher) 6 1 I AGS1165 End Connection Fuel Hose - 90 Nipple Elbow Assembly 8 1 I AGS1166 End Connection Fuel Hose - 45 Nipple Elbow Assembly 9 1 I AGS1167 Pipe Couplings 90 Union Elbow Assembly 6 1 I AGS1168 Pipe Couplings 45 Union Elbow Assembly 6 1 I AGS1169 Pipe Couplings - Union Elbows, Union Sleeve 5 1 I AGS1170 Pipe Couplings Nipple 10 2 A AGS1171 Y Adaptor (for Fuel Tank Fire Extinguisher) 6 1 I AGS1172 End Connection for Flexatex Fuel Hose, Flared End Connecting Tube AGS1173 Pipe Couplings (for Aluminium Alloy range) Banjo Bolt 3 / 16 to 1 B.S.P.F. with hole for Bleeder Screw 5 1 I A AGS1174 Pipe Couplings, Bleeder Screw, ¼" B.S.F A AGS1175 End Connection for Flexatex Fuel Hose 90 Elbow Tube 5 1 I AGS1176 End Connection for Flexatex Fuel Hose 45 Elbow Tube 5 1 I AGS1177 Pipe Couplings 90 Elbow Tube 4 1 I AGS1178 Pipe Couplings 45 Elbow Tube AGS1182 Flared End Connection (Straight) for Flexatex Fuel Hose. General Arrangement AGS1183 End Connection (90 Elbow) for Flexatex Fuel Hose General Arrangement AGS1184 End Connection (45 Elbow) for Flexatex Fuel Hose General Arrangement AGS1185 Pipe Couplings Cone Plugs (Brass) 4 1 I AGS1186 Seals, Bonded, Steel and Synthetic Rubber 13 4 A AGS1187 Standard Union Nuts (Light Alloy) 11 1 I AGS1193 Pipe Coupling ½" Flanged Bulkhead Union Body 5 1 I AGS1194 Pipe Coupling ½" x ⅜" Flanged Bulkhead Union Body 5 1 I AGS1195 Pipe Couplings Cone to Union Tees Unequal 4 2 I AGS1196 Pipe Couplings Union 4-Way Piece (Unequal) 4 1 I AGS1197 Pipe Couplings Nipple Plugs (Brass) AGS1198 Pipe Couplings Cone Tee (Equal) 5 1 I AGS1199 Pipe Couplings Union Tee (Unequal) 4 1 I AGS1200 Charging Valve Mark I, (Air & Hydraulic) Valve Body Assembly 7 10 I AGS1211 Adaptor Block (½" B.S.P.) for Air Charging Valve 7 1 I AGS1212 Adaptor Block (⅛" B.S.P.) for Air Charging Valve 7 1 I AGS1213 Pipe Couplings (Aluminium Alloy Range) Banjo Bolt Assembly 13 2 A AGS1214 Pipe Couplings (Aluminium Alloy Range) Aluminium Alloy Banjo 15 2 A Bolt with Cone Head Connector AGS1215 Pipe Couplings (Light Alloy Range) Light Alloy Banjo Bolt with 7 1 I

15 Union Head Connection AGS1216 Standard Union Nuts (Steel) 10 2 A AGS1217 Standard Union Nuts (Brass) 10 1 I AGS1218 Pipe Couplings (Aluminium Alloy) Standard Inner Sleeve 14 2 A AGS1219 Dimensions of Tapped Holes in Components for connecting AGS 4 2 A Pipe Couplings Direct AGS1220 Pipe Couplings for Aluminium Allow Range, Aluminium Alloy Banj 12 2 A Bolt 3 / 16 to 1 B.S.P.F. with Hole for Bleeder Screw o AGS1229 Plugs, Transportation, B.S.P.F. 2 1 A AGS1230 G.A. Re-usable End Fitting for Non-Fire Resistant Hose D.T.D. 2 1 A (R.D.I.) 3951 AGS1231 Union Nut. Re-usable End Fittings for Non-Fire Resistant Hose 7 2 A D.T.D. (R.D.I.) 3951 AGS1232 Tailpiece Re-usable End Fittings for Non-Fire Resistant Hose 7 2 A D.T.D. (R.D.I.) 3951 AGS1233 Ferrule Re-usable End Fittings for Non-Fire Resistant Hose 7 2 A D.T.D. (R.D.I.) 3951 AGS1234 Assembly of re-usable 90 End Fittings for Non-Fire Resistant 7 6 A Hose D.T.D. (R.D.I.) 3951 AGS1235 Assembly of Re-usable 45 End Fittings for Non-Fire Resistant 6 3 A Hose D.T.D. (R.D.I.) 3951 AGS1236 Pipe Couplings, Cone Caps (Steel) 3 / 16 to 1½ 6 2 A AGS1237 Assembly of Re-usable 90 End Fitting (Steel) ¼ I / D Non-Fire 3 4 A Resistant Hose, D.T.D. (R.D.I.) 3951 AGS1238 Assembly of Re-usable 45 End Fitting (Steel) ¼ I / D Non-Fire 3 2 A Resistant Hose, D.T.D. (R.D.I.) 3951 AGS1239 Union Nut (Steel) ¼ B.S.P.F. Re-usable End Fittings for ¼ I / D 2 1 A Non-Fire Resistant Hose to Spec. D.T.D. (R.D.I.) 3951 AGS1500 Cable Bonding Clamps 10 1 I AGS1511 Sleeves, Bonding, Metal Braided Cable, H.T. Inner, Straight, Long 9 1 A AGS1512 Sleeves, Bonding, Metal Braided Cable, H.T. Outer, Straight 12 1 A AGS1513 Sleeves, Bonding, Metal Braided Cable, H.T. Inner, Straight, 10 1 A Medium AGS1514 Sleeves, Identification Cable, H.T. Black and Red 9 1 A AGS1515 Sleeves, Insulating Cable H.T. Black and Red 9 1 I AGS m/m Cable Lugs 7 1 I AGS1517 H.T. Cable Union Nut 16 1 A AGS1518 Thimble for H.T. Cable 7 1 I AGS1519 L.T. Cable Union Nut 14 1 A AGS1520 Sleeves, Bonding, Metal Braided Cable, L.T. Inner, Type A 9 1 A AGS1521 Sleeves, Bonding, Metal Braided Cable, L.T. Outer, Type A 11 1 A AGS1522 Sleeves, Insulating, Cable, L.T. Black and Red 5 1 A AGS1523 Sleeves, Identification, Cable, L.T. Black and Red 8 1 A AGS m/m Cable Lugs 9 1 I AGS1528 Cable Clamps for Single Metal Braided H.T. & L.T. Cables 10 1 I AGS1530 Assembling Tools for H.T. and L.T. Braided Cable Fittings 4 1 I AGS1531 Thimble for Cambric covered H.T. Cables 6 1 A

16 AGS1534 Bonding Clips (for Sparking Plugs & Generators) 1 AGS1536 Bonding Clips 5 1 I AGS1537 Bonding Clips for H.T. Outer Sleeve 5 1 I AGS m/m Cable Lugs 6 1 I AGS1541 Electric Cable Cleats 6 1 I AGS1542 Electric Cable Saddles 7 1 I AGS1551 Locking Pins 7 1 A AGS1558 Bonding Clamps for Metal Braided Cables 14 2 I AGS1560 Bonding Clamps for Metal Braided Cables 14 1 I AGS1561 Split Bush for L.T. Metal Braided Cable 6 1 I AGS1562 Switch Clamp 1 AGS1564 Cable Bonding Clamps 11 1 I AGS1582 B.A. Washers 7 1 I AGS1583 B.A. Washers (Double Spring) 6 1 I AGS1591 Lugs, Connecting for Cable Assembly 4 2 I AGS1592 Lugs, Connecting for Cable, Unisheath I AGS1593 End Cable Claw Type 6 B.A. 5 1 I AGS1594 Ends, Cable Claw Type - 4 BA 6 1 I AGS1595 Ends, Cable Claw Type - 2 BA 6 1 I AGS1596 Ends, Cable Claw Type - 0 BA 6 1 I AGS1599 Bonding Wire Socket 5 1 I AGS1600 Cable Ends. Eye Type 6 1 I AGS1601 Sleeves, Identification, Cable L.T. Unisheath 4, Cable 4 1 I AGS1603 Sleeves, Identification, Cable L.T. Uniflex 4, Cable AGS1606 Tubes. Cable End 8 1 A AGS1612 Bonding Lead AGS1615 Cable Ends, Eye & Fork Type, Channel End, Crimping 4, 6 & and 8 B.A. 4 1 I AGS1616 Sleeves, Bonding, Metal Braided Cable H.T. Inner, Straight, Short 7 1 A AGS1617 Cleats, Single Hole Attachment (Light Alloy) 4 1 I AGS1619 Lug, Connecting for Cable, Unispark I AGS1620 Lug, Connecting for Cable, Uniflex I AGS1621 Sleeves, Identification Cable L.T. Unispark 7 Cable 4 1 I AGS1624 Terminal (Spring Loaded Type) for Magneto 7 m/m H.T. Cables 4 3 I AGS1625 AGS1630 Sleeves, Bonding, Metal Braided Cable, H.T. Outer, Curved with Union Nut Sleeves, Bonding, Metal Braided Cable, H.T. 8.5 m/m Cable, Inner 6 1 I I AGS1634 Nut, Union, for H.T. Cable 6 1 A AGS1635 Nut, Union, for L.T. Cable 5 1 A AGS1636 Sleeves, Bonding, Metal Braided Cable L.T. Inner, Type B 4 1 A AGS1638 Sleeves, Bonding, Metal Braided Cable, L.T. Outer, Type B 7 1 I AGS1639 Sleeves, Bonding, Metal Braided Cable, L.T. Inner, Type C 7 1 I

17 AGS1640 Guard for Feathering Switch 2 1 I AGS1651 Sleeves, Plain Cable, L.T. Type 1. Circular, No A AGS1652 Sleeves, Plain Cable, L.T. Type 1. Oval, No A AGS1653 Sleeves, Bonding, Metal Braided Cable L.T. Type 2, Circular Inner 13 1 A AGS1654 Sleeves, Bonding, Metal Braided Cable L.T. Type 2, Circular Outer 14 1 A AGS1655 Sleeves, Bonding, Metal Braided Cable L.T. Type 2, Oval Inner 9 1 A AGS1656 Sleeves, Bonding, Metal Braided Cable L.T. Type 2, Oval Outer 10 1 A AGS1657 Collet 8 1 A AGS1658 Gland Nut 14 1 A AGS1660 Sleeves, Bonding, Metal Braided Cable, L.T. Type 3, Circular, Inner 7 1 I AGS1661 Water Pipe Bonding Clip (Brass) 6 1 I AGS1662 Beads, Insulating, Type B (Cup and Ball Ended) 1 1 I AGS1663 Cleat, Wiring, Porcelain AGS1664 Cleat, Wiring, Porcelain No I AGS1665 Insulator, Screw Eye AGS1666 Cleats, Wiring, Brass, No. 2 to 8 (inclusive) AGS1667 Cleat, Wiring, Brass No. 10 AGS1668 Cleat, Wiring, Aluminium No. 10 AGS1669 Cleat, Wiring, Brass No. 9 AGS1670 Cleat, Wiring, Aluminium No. 9 AGS1671 Cleats, Wiring, Aluminium No. 12 and No. 13 AGS1672 Cleats, Wiring, No.14 & No A AGS1673 Cleat, Wiring, Fibre, No. 1 AGS1674 Cleat, Wiring, Fibre, No. 2 AGS1675 Cleat, Wiring, Fibre, No. 3 AGS1676 Cleat, Wiring, Fibre, No. 4 AGS1677 Cleats, Wiring, Fibre, No. 6 & 7 AGS1678 Cable Ends, Fork Type, Channel End, Soldering 4 1 I AGS1681 Cable Ends, Eye Type, Channel End 4 1 I AGS1683 Cleat, Wiring, Brass, No. 1 AGS1684 Cleat, Wiring, Aluminium No. 1 AGS1685 Staples, Insulating AGS1686 AGS1687 Sleeves, Bonding, Metal Braided Cable, L.T. Type 4, Circular Inner Sleeves, Bonding, Metal Braided Cable, L.T. Type 4, Circular, Outer 7 1 I I AGS1688 Sleeves, Plain Cable, L.T. Type 1, Circular, No I AGS1689 Sleeves, Plain Cable, L.T. Type 1, Oval, No I AGS1690 Cleat Wiring, Aluminium AGS1691 Cable Ends Crown Eye Type. MK A to F 6 8 I AGS1693 Cleats, Wiring, Aluminium AGS1694 Cleat, Wiring, No. 2 10

18 AGS1695 Dummy Sparking Plugs, 12, 14 & 18 m/m 6 1 I AGS1696 Bushes, Insulating Rubber AGS1697 H.T. Terminal AGS1703 Lug Terminal No. 1 AGS1704 Lug Terminal No. 2 AGS1705 Lug Terminal No. 3 AGS1706 Lug Terminal No. 8 AGS1710 Locknut, L.T. Union 5 1 A AGS1711 Sleeves, Insulating Cable, L.T. AGS1712 Ferrule - Cable End AGS1713 L.T. Cable End 4 1 A AGS1714 Cable Sleeve, Insulating L.T. 3 1 A AGS1715 Lug Terminal No I AGS1716 Insulating Sleeve (for H.T. Ignition Cable Sparking Plug Terminal) 2 1 A AGS1722 AGS1723 AGS1724 AGS1725 AGS1726 AGS1727 AGS1729 Sleeves, Bonding, Metal Braided Cable, L.T. Type 5, Circular Inner & Outer Sleeves, Bonding, Metal Braided Cable, R.T. Type 5, Circular Inner Sleeves, Bonding, Metal Braided Cable, R.T. Type 5, Circular Outer Blanking Discs. (For use under Gland Nuts where Cable Sleeves are not fitted) Sleeves, Bonding, Metal Braided Cable, L.T. Type 6, Circular Inner & Outer Sleeves, Bonding, Metal Braided Cable, L.T. Type 7, Circular, Inner Sleeves, Bonding, Metal Braided Cable, L.T. Type 7, Circular, Outer 5 1 I I I I I I I AGS1731 Sleeves, Outer, Circular (for Cable Electric, L.T. Metal Braided) 4 1 I AGS1732 Sleeves, Bonding, Metal Braided Cable, L.T. Type 8, Circular Inner & Outer 6 1 I AGS1733 Sleeves, Plain Cable, L.T. Type 1, Circular, No I AGS1734 AGS1735 Sleeves, Bonding, Metal Braided Cable, L.T. Type 9, Circular, Inner Sleeves, Bonding, Metal Braided Cable, L.T. Type 9, Circular, Outer 6 1 I I AGS1737 Lug Terminal No. 10 & 11 AGS1738 Lug Terminal No. 12 & I AGS1739 Lug Terminal No. 14 AGS1740 Lug Terminal No. 15 AGS1741 Lug Terminal No. 16 & 31 AGS1744 Lug Terminal No I AGS1745 Terminal Eyelet AGS1746 Lug Terminal No. 18 AGS1747 Lug Terminal No. 19, 23, 24, I AGS1748 Lug Terminal No. 22 (D.C. Output on UKN Generator) 11

19 AGS1749 Lug Terminal No. 28 & 29 AGS1753 Combined Screw & Washer, 4 B.A. 5 2 I AGS1754 Combined Screw & Washer, 6 B.A. 5 2 I AGS1756 Connector, Bonding, Flanged, (Round) 5 1 I AGS1757 Connector, Bonding, Flanged, (Oval) 4 1 I AGS1759 Terminals, Instrument (Single) 2 2 A AGS1760 Terminals, Instrument (Double) 2 2 A AGS1761 Lug Terminal No. 25 AGS1762 Sleeves, Cable, Single (Weather Proofing) 4 1 I AGS1763 Sleeves, Cable, Twin (Weather Proofing) 4 1 I AGS1764 Sleeves, Cable, Single, Weather Proofing (with Twin Cable Flanges) 4 1 I AGS1765 Arrangement of Spring Cover for Buttons, Push 8 5 I AGS1766 Sleeve, Cable Lug (Weather Proofing) 2 1 I AGS1767 Cable End Fitting for Magneto Low Tension Connection 2 1 A AGS2000 A.G.S. Stiffnuts - Application 14 3 A AGS2001 Stiffnuts - Hexagon - Thick 14 1 I AGS2002 Stiffnuts - Hexagon - Thin 14 1 I AGS2003 Stiffnuts - Hexagon - Countersunk 14 1 I AGS2004 Stiffnuts - Single Anchor - Thick 9 1 I AGS2005 Stiffnuts - Single Anchor - Thin 9 1 I AGS2006 Stiffnuts - Single Anchor - Countersunk 9 1 I AGS2007 Stiffnuts - Double Anchor - Thick 14 1 I AGS2008 Stiffnuts - Double Anchor - Thin 16 1 I AGS2009 Stiffnuts - Double Anchor - Countersunk 14 1 I AGS2010 Stiffnuts - Clinch Nuts. Type: Simmonds and Oddie 8 1 I AGS2011 Stiffnuts - Clinch 18 1 I AGS2012 Stiffnuts - Floating Anchor - Thick 14 1 I AGS2013 Stiffnuts - Floating Anchor - Thick 15 1 I AGS2014 Stiffnuts - Floating Anchor - Countersunk 14 1 I AGS2015 Stiffnuts - Stripnuts - Thick 14 1 I AGS2016 Stiffnuts - Stripnuts - Thin 15 1 I AGS2017 Stiffnuts - Stripnuts - Countersunk 14 1 I AGS2018 Stiffnuts - Single Anchor - Thick 12 1 I AGS2019 Stiffnuts - Stripnuts - Thin 12 1 I AGS2020 Stiffnuts - Stripnuts - Countersunk 1 AGS2021 Stiffnuts - Translucent Cap 12 1 I AGS2023 Stiffnuts, Double Anchor, with Translucent cap 12 1 I AGS2034 Lock Washers: Shakeproof Flat, External Teeth, Steel 9 1 I AGS2035 Lock Washers: Shakeproof Flat, Internal Teeth, Steel 9 1 I AGS2036 Lock Washers: Shakeproof Countersunk, External Teeth, Steel 7 1 I AGS2037 Lockwashers: Shakeproof Flat, Internal Teeth Phos. Bronze 6 1 I

20 AGS2038 Rivets, Chobert, Mandrels 3 1 A AGS2039 Rivets, Blind, A.G.S. (Chobert & Tucker), Application 3 1 A AGS2040 Rivets, Chobert, Steel D.T.D. 720 Snap Head 7 1 A AGS2041 Rivets, Chobert, 120 (Steel) D.T.D. 720 Countersunk Head 5 1 A AGS2042 Rivets, Chobert, Steel, Pins. Sealing 7 1 A AGS2043 Rivets, Chobert, Aluminium Alloy (L.37) Snap Head 5 1 A AGS2044 Rivets, Chobert, 120 (Aluminium Alloy) L.37 Countersunk Head 4 1 A AGS2045 Rivets, Chobert, Aluminium Alloy Snap Head 6 1 A AGS2046 Rivets, Chobert, 120 (Aluminium Alloy) Countersunk Head 6 1 A AGS2047 Rivets, Chobert, Aluminium Alloy, Pins. Sealing 9 1 A AGS2048 Rivets, Tucker. Alum m Alloy Pop Domed Head 6 1 I AGS2049 Rivets, Tucker. Alum m Alloy Pop, Countersunk Head (SUPERSEDED BY AGS4718) 7 1 I AGS2050 Rivets, Tucker, Monel, Pop Domed Head 6 1 A AGS2051 Rivets, Tucker, Monel Pop Countersunk Head 7 1 I AGS2052 Mandrels for Tucker Open Aluminium and Monel Domed and 9 3 A Countersunk Head Rivets AGS2053 Rivets, Tucker. Alum m Alloy Cup Domed Head 4 1 I AGS2054 Rivets, Tucker. Alum m Alloy Cup Countersunk Head 4 1 I AGS2055 Rivets, Tucker, Monel, Cup, Domed Head 3 1 A AGS2056 Rivets, Tucker, Monel, Cup, Countersunk Head 3 1 A AGS2059 Rivets, Tucker, Monel, Pop Domed Head (Unplated) 5 1 A AGS2060 Rivets, Tucker, Monel Pop Countersunk Head (Unplated) 5 1 I AGS2065 Avdel Self Sealing Snap Head Rivets (Aluminium Alloy) 7 1 A AGS2066 Avdel Self Sealing 100 Countersunk Rivets (Aluminium Alloy) 7 1 A AGS2067 Chobert, 100 Countersunk Rivet. Steel 6 1 A AGS2068 Chobert, 100 Countersunk Rivet. Aluminium Alloy 5 1 A AGS2069 Chobert, 100 Countersunk Rivets 4 1 I AGS2070 Rivets, Tucker, 100 Monel Pop Countersunk Head (Plated) 4 1 A AGS2071 Rivets, Tucker, 100 Monel Pop Countersunk Head (Unplated) 4 1 A AGS2072 ¼ Washer, Tin Plated to D.T.D A AGS2073 Rivets, Tucker. Alum m Alloy Pop Countersunk Head 2 1 I AGS2074 Rivets, Tucker. Alum m Alloy Pop Domed Head 2 1 I AGS2080 Pipe Clip, Rubber covered for 3 / 16 DIA. Fixing 9 1 A AGS2081 Pipe Clip for 3 / 16 DIA. Fixing, Rubber covered, with Earthing 11 1 A Tongue AGS2082 Pipe Clip, Rubber covered for ¼ DIA. Fixing 8 1 A AGS2083 Pipe Clip for ¼ DIA. Fixing, Rubber covered with Earthing 9 1 A Tongue AGS2084 Typical Assembly of Non-Reversible Pipe Couplings 3 1 A AGS2085 Special Pipe Couplings (Alum m Alloy) Outer Sleeve 5 4 A AGS2086 Non Return Valve, Safety Guard 2 1 I AGS2087 Non Return Valve Safety Guard Securing Ring 1 1 A AGS2088 Pipe Identification Band for use in Hot Zones (1¼ wide) 5 1 A

21 AGS2089 Clip Identification Band 4 1 A AGS2090 Pipe Identification Band for use in Hot Zones (1.0 wide) 5 1 A AGS2091 Clip Identification Band 4 1 A AGS2092 Pipe Identification Band for use in Hot Zones (¾ wide) 5 1 A AGS2093 Clip Identification Band 4 1 A AGS2094 Flow Direction Indicator Bands for use in Hot Zones 5 1 A AGS2095 Clip Identification Band 4 1 A AGS2096 Test for ¼" B.S.P.F. Air & Hydraulic Charging Valve System 5 4 A AGS2097 Bonding, Flexible - General 5 1 A AGS2098 Securing Ring, Compression Tube 1 1 A AGS2099 Method of Assembling Safety Guard & Securing Ring on N.R.V. 1 1 A AGS2100 High Temperature Bonding Leads 1 1 A AGS2101 Pipe Support Clip 2 1 A AGS2104 Pipe Bonding and Support Clip 2 1 A AGS2105 Pip Pins, Push-Pull 6 2 A AGS2106 Push Type Pip Pin with Handle 3 1 A AGS / 16 DIA. Pull Type Pip Pin 5 1 A AGS2108 Protective Plugs for Plain Bores. ⅝ to 2½ DIA. 2 1 A AGS2109 Protective Plugs to suit B.S.P.F. Threads 2 1 A AGS2110 Transport/Protective, for 20 Flanges 5 1 I AGS2111 Pipe Coupling (Aluminium Alloy) ¼ B.S.P.F. Outer Sleeve 6 1 A AGS2112 Protection Plug 2 1 A AGS2113 Protection Plug 2 1 A AGS Clip Identification Band 4 1 A AGS2118 Cap, Sealing - Shallow Drawn B.S.P.F. - Metal (for Inhibited Units) 1 1 A AGS2119 Cap, Sealing - Deep Drawn B.S.P.F. - Metal (for Inhibited Units) 1 1 A AGS2120 Pipe Couplings, Nipple 5 1 A AGS3005 Studs ¼ U.N.F. High Duty 3 1 A AGS3006 Studs 3 / 16 U.N.F. High Duty 3 1 A AGS3007 Studs 3 / 8 U.N.F. High Duty 3 1 A AGS3012 AGS3013 AGS3014 Pipe Couplings (Steel). Cone Union Adaptor/Unified Attachment End 3 / 16 to ½, for use with Parallel Gaskets (e.g. Bonded Seals) Pipe Couplings (Steel). Union Adaptor/Unified Attachment End 3 / 16 to ½, for use with Parallel Gaskets (e.g. Bonded Seals) Dimensions of Tapped Bosses with Unified Threads, for Pipe Coupling Union Adaptors, using Parallel Gaskets (eg Bonded Seals) 7 2 A A A AGS3016 AGS3017 AGS3018 Pipe Couplings (Steel) Cone Union Adaptor unified at Attachment End 3 / 16 to ½, for use with O Ring Gaskets (and 10050) or equivalent AGS 3018 Tapped Bosses Pipe Couplings (Steel) Unified Adaptor / Unified Attachment End 3 / 16 to ½, for use with O Ring Gaskets (and 10050) or equivalent AGS 3018 Tapped Bosses Dimensions of Tapped Bosses with Unified Threads for Pipe Coupling Union Adaptors, using O Ring (e.g. U.S. AN.6290 or 8 2 I I I

22 equivalent) Gaskets AGS3020 Protection Plug 5 1 I AGS3021 Protective Cap AGS3022 Ball Joint 1 1 A AGS3023 Socket for Ball Joint 1 1 A AGS3024 Ball for Ball Joint 1 1 A AGS3025 Plug for Ball Joint 1 1 A AGS3026 G.A. of ¼ Bore Drain Cock (No. 1 size) 1 1 A AGS3027 Body for Drain Cock 4 1 A AGS3028 Plug for Drain Cock 1 1 A AGS3029 Nut for Drain Cock 1 1 A AGS3030 G.A. of ½ Bore Drain Cock (No. 2 size) 1 1 A AGS3031 Body for Drain Cock 1 1 A AGS3032 Plug for Drain Cock 1 1 A AGS3033 Nut for Drain Cock 1 1 A AGS3034 Test of 9 / 16 U.N.F. (Air & Mineral Base Hydraulic Fluid) 5 4 A AGS3035 UN Thread Identification Label (Metal) 1 1 A AGS3036 UN Thread Identification Label (Adhesive) 2 1 A AGS3037 Avlok 4 B.A. & No. 6 U.N.C. Blind Anchor Nuts (Steel) 1 1 A AGS3038 Avlok 2 B.A., No. 10 U.N.F. & No. 8 U.N.C. Blind Anchor Nuts 1 1 A (Steel) AGS3039 Avlok ¼ B.S.F. and ¼ U.N.F. Blind Anchor Nuts (Steel) 1 1 A AGS3040 Avlok 5 / 16 B.S.F. and 5 / 16 U.N.F. Blind Anchor Nuts (Steel) 1 1 A AGS3041 Cage for Blind Nuts 1 1 A AGS3042 Cage for Blind Nuts 1 1 A AGS3043 Cage for Blind Nuts AGS3044 Nut for AGS 3041 Cage 1 1 A AGS3045 Nut for AGS 3042 Cage 1 1 A AGS3046 Nut for AGS 3043 Cage 1 1 A AGS3047 Nut for AGS 3043 Cage 1 1 A AGS3048 Fitting Data for Avlock Blind Nuts 1 1 A AGS3049 Pipe Couplings, Bleeder Screw, ¼" U.N.F. 6 1 A AGS Rose Self Aligning Spherical Bearing Rod Ends. Unified Female 3 2 A Series AGS Rose Self Aligning Spherical Bearing Rod Ends. Unified Male 2 2 A Series AGS UNJF - 3 B Tapped Hole for Instruments (Pressure) 3 1 A AGS UNJF - 3 B Tapped Hole for Instruments (Static) 3 1 A AGS3092 Pitot Connector (Screwed) 4 1 A AGS3093 Pitot Connector (Plain 5 / 16 DIA.) 6 1 A AGS3094 Static Connector (Screwed) 4 1 A AGS3095 Static Connector (Plain 3 / 8 DIA.) 6 1 A AGS3096 Connector ⅛ B.S. Pipe with Female Cone AGS3097 Connector ⅜ UNF. with Female Cone 15

23 AGS Gasket - O Ring 2 1 A AGS3401 Assembly of Mark 1 Aluminium Alloy Low Pressure Unions 5 / 16 DIA. Tubing with Drain Trap AGS3402 Assembly of Mark 1 Aluminium Alloy Low Pressure Unions 5 / 16 DIA. Tubing - Tee Union AGS3403 Assembly of Mark 1 Aluminium Alloy Low Pressure Unions 5 / 16 DIA. Tubing - Elbow Union AGS3404 Assembly of Mark 1 Aluminium Alloy Low Pressure Unions 5 / 16 DIA. Tubing - Straight Union 1 1 A A A A AGS3405 Straight Union Body - Unified 4 1 A AGS3406 Tee Union Body - Unified 3 1 A AGS3407 Elbow Union Body - Unified 3 1 A AGS3408 Drain Trap - Unified 4 1 A AGS3409 Washer 1 1 A AGS3410 Union Nut - 5 / 16 O / D Pipe, Unified 5 1 A AGS3411 Bush for use with 5 / 16 Pipe Union Nut 3 1 A AGS3412 Assembly of Union Nut and Bush - Unified 2 1 A AGS3413 Wing Nuts 2 1 A AGS3414 Special Pipe Couplings (Aluminium Alloy) Outer Sleeve 4 1 A AGS3415 Non Return Valve, Safety Guard for use with ¼" B.S.P.F. Thread 1 1 A AGS3420 Flanged Mounting 3 1 A AGS3421 Locking Plate 3 1 A AGS3422 Straight Union (Pitot) 4 1 A AGS3423 Elbow Union (Pitot) 4 1 A AGS3424 Straight Union (Static) 4 1 A AGS3425 Elbow Union (Static) 4 1 A AGS3426 Plug - Sealing unified Threads for inhibited Units AGS3427 Cap - Sealing, Shallow Drawn, unified - Metal (for inhibited Units) AGS3429 Flexible Hose Assembly - Pitot 2 1 A AGS3430 Flexible Hose Assembly - Static 2 1 A AGS3431 Pipe Clip Rubber covered for ¼ DIA. Fixing. (for Pipes 1¾ DIA. 4 1 A & over) AGS3432 Pipe Clip Rubber covered for ¼ DIA. Fixing with Earthing 4 1 A Tongue (for Pipes 1¾ DIA. & over) AGS3433 Drain Trap, Internal, Straight Union. (Pitot) 1 1 A AGS3434 Drain Trap, Internal, Elbow Union. (Pitot) 1 1 A AGS3435 Drain Trap, Internal, Straight Union. (Static) 1 1 A AGS3436 Drain Trap, Internal, Elbow Union. (Static) 1 1 A AGS3437 Drain Trap, External, Straight Union. (Pitot) 1 1 A AGS3438 Drain Trap, External, Elbow Union. (Pitot) 1 1 A AGS3439 Drain Trap, External, Straight Union. (Static) 1 1 A AGS3440 Drain Trap, External, Elbow Union. (Static) 1 1 A AGS3441 Pipe Identification Band for use in Hot Zones (½ wide) 3 1 A AGS3442 Pipe Warning Symbol Bands for use in Hot Zones (½ wide) 3 1 A

24 AGS3500 Connector 1 / 8 B.S. Pipe with Female Cone 2 1 A AGS3501 Connector 3 / 8 B.S. Pipe with Female Cone 2 1 A AGS AGS Insert, Screw Thread, Unified, Screw Locking, Helical Coil, Corrosion Resistant Steel DTD734, Cadmium plated Insert, Screw Thread, Unified, Screw Locking, Helical Coil, H.R. Alloy BS HR503. Source control Drawing 4 4 A A AGS3800 Cover for 10,000 lb. Lashing Fitting Base 2 1 A AGS3801 Cover for 25,000 lb. Lashing Fitting Base 2 1 A AGS Plugs - Protection, and Sealing, for Inhibited Units, Unified 4 1 A Threads AGS Caps - Protection, and Sealing, for Inhibited Units, Unified 2 1 A Threads AGS3808 Bearings, Airframe, Self Lubricating. Plain Cylindrical - Alum m Alloy Shell AGS3809 Bearings, Airframe, Self Lubricating. Plain Cylindrical Steel Shell AGS3810 Bearings, Airframe Self Lubricating. Flanged Cylindrical - Alum m Alloy Shell AGS3811 Bearings, Airframe Self Lubricating. Flanged Cylindrical Steel Shell AGS3812 Bearing, Self-aligning, Grooved Outer Ring, P.T.F.E. Lined, Wide 3 2 I AGS3813 Bearing, Self-aligning, Grooved Outer Ring, P.T.F.E. Lined, 3 2 I Narrow AGS3814 Bearing, Self-aligning, Plain Outer Ring, P.T.F.E. Lined, Wide 3 2 I AGS3815 Bearing, Self-aligning, Plain Outer Ring, P.T.F.E. Lined, Narrow 3 2 I AGS3816 Cover for 5,000 lb. Lashing Fitting Base 2 1 A AGS Washer, Seal, Flat 1 1 A AGS Gasket (Corrujoint) 2 1 A AGS Gasket (Corrujoint) 1 1 A AGS3910 Dimensions for Close Tolerance Tapped Bosses with Unified Threads for Pipe Coupling Union Adaptors using Pipe Fitting O Ring Seals, eg. AS (Recommended for use with pressures above2500 lbf/in 2. For pressures up to 2500 lbf/in 2, AGS 3911 recommended) 2 2 A AGS3911 Dimensions of Medium Tolerance Tapped Bosses with Unified Threads for Pipe Coupling Union Adaptors using Pipe Fitting O Ring Seals, eg. AS (Recommended for use with pressures above 2500 lbf/in 2. For pressures up to 2500 lbf/in 2, AGS 3910 is recommended) 2 2 A AGS3912 Cone, Union Adaptor, Steel (Pipe Couplings Whitworth/UNJF) 4 2 A AGS3913 Union Adaptor, Steel (Pipe Couplings Whitworth/UNJF) 2 6 A AGS3914 Hose Assembly, Flexible - Pitot (Metric) Source Control Drawing AGS3915 Hose Assembly, Flexible - Static (Metric) Source Control Drawing AGS3920 Rivet, Blind, Snap Head, Self Plugging, Interference Lock(Avdel), 3 4 A Corrosion Resisting Steel AGS3921 Rivet, Blind, 100 Countersunk Head, Self Plugging, Interference 3 4 A Lock (Avdel), Corrosion Resisting Steel AGS3922 Rivet, Blind, Snap Head, Self Plugging, Interference Lock (Avdel) Corrosion Resisting Steel, Cadmium Coated 4 4 A

25 AGS3923 Rivet, Blind, 100 Countersunk Head, Self Plugging, Interference Lock (Avdel), Corrosion Resisting Steel, Cadmium Coated 4 4 A AGS3924 Clamp, Hose, Worm Drive, 'Microflex' (Extra Light Duty) 2 1 A AGS3925 Clamp, Hose, Worm Drive 'Minox', (Light Duty) 2 1 A AGS4670 Sealed, Bonded - with P.T.F.E. Locating Ring 2 1 A AGS4671 Ring, Locating P.T.F.E. 2 1 A AGS4672 Servicing Point Emblem - Self Adhesive 2 6 A AGS4673 Maintenance Point Emblem - Self Adhesive 2 5 A AGS4674 Ground Handling Point Emblem - Self Adhesive 4 4 A AGS4675 Safety/Hazard Emblem - Self Adhesive 2 3 A AGS4676 Armament Handling Point Emblem - Self Adhesive 2 4 A AGS4677 AGS4678 Insert, Screw Thread, Metric, Screw Locking, Helical Coil, Corrosion Resistant Steel DTD 734, Cadmium Plated Thread Insert - Metric - Solid Wall, s/locking - Alloy Steel, Cad. Plated 3 2 A AGS4714 Call up of Glass Fibre Tape System Identification Markers 2 2 A AGS4715 Union Nut Re-usable End Fittings for Non Fire Resistant Hose 1 1 A AGS4716 Rivet, Self Sealing 120 Countersunk Avdel, Aluminium Alloy 2 3 I AGS4717 Rivet, Tucker Pop Aluminium Alloy Domed Head 3 2 A AGS4718 Rivet, Tucker Pop, Aluminium Alloy, Countersunk Head 4 2 I AGS4719 AGS4720 Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked Spindle, Aluminium Alloy, Universal Head Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked Spindle, Aluminium Alloy, 100 Countersunk Head 7 2 A A

26 AS Specifications 19

27 AS1 AS2 Titanium Alloy Bolts Hexagon Heads Unified Thread and Close Tolerance Shanks Titanium Alloy Bolts, 100 Countersunk Heads and Unified Threads 3 2 I I AS100 Handwheel 6 Diameter 5 1 I AS101 Handwheel 8 Diameter 4 1 I AS102 Handwheel 10 Diameter 5 1 I AS103 Pulley Ballbearing 2.0 DIA. 7 1 A AS104 Pulley Ballbearing 3.0 DIA. 8 1 A AS105 Pulley Ballbearing 4.0 DIA. 8 1 A AS106 Pulley Ballbearing 5.0 DIA. 8 1 A AS107 Pulley, Shrouded (Single) 5 1 I AS108 Pulley, Shrouded (Twin) 5 1 I AS109 Pulley, Shrouded (Triple) 5 1 I AS110 Pulley, Shrouded (Quadruple) 5 1 I AS111 Pulley Ballbearing 1.15 DIA A AS112 Cover (for Pulley) 4 1 I AS113 Cover with Spacer (for Pulley) 5 1 I AS114 Spacer (for Pulley) 5 1 I AS116 Assembly of Filler Cap, I AS117 Body, Filler Cap, I AS119 Seating Ring, Filler Cap, 2 AS120 Locking Ring, Filler Cap, I AS122 Stud, Filler Cap 4 1 I AS123 Nut Ring, Filler Cap, I AS124 Assembly of Filler Cap, 3¼ 7 1 I AS125 Body, Filler Cap, 3¼ 4 1 I AS127 Seating Ring, Filler Cap, 3¼ AS128 Locking Ring, Filler Cap, 3¼ 2 1 I AS129 Nut Ring, Filler Cap, 3¼ 4 1 I AS130 Spanner for Filler Caps AS133 Couple for Box Single Lever Parachute Control 4 1 A AS134 Lever Hand - Assembly 4 1 A AS135 Knob (Hand Lever) 5 1 I AS136 Lever - Jettison 5 1 A AS139 Plunger - Jettison 4 1 A AS140 Spring 5 1 A AS144 Bush 4 1 A AS145 Shim 4 1 A AS149 Lever (Stream) 5 1 A AS152 Handwheel 3½ Diameter 6 1 A AS153 Lever - Hand 3 1 A AS154 Housing - Plunger 3 1 A AS155 Rivet, Snap Head 10 1 I