feed-through plugs 0.6 mm pitch DFK-PC 6/...-ST(F)-0,6 If 6 mm conductor is used, the new feed-through plug connector offers the possibility to trnsfer current of 76 A from inside the device to outside nd vice-vers. Just insert DFK-PC 6 into the opening in the housing nd fix it in plce using the esy-to-use snp-lock mechnism, without the need for dditionl tools. This version is designed in such wy tht there is screw connection on the device inside to guide cbles from outside the device to the inside (or vice-vers). In combintion with the stndrd PC 6 plugs, cblecble feed-through fit in the device housing cn be relized for to 9 positions. In the STF versions, the shielding function cn be guided onto or through the housing wll. The fstening flnges offer vibrtion-proof connection. The feed-through plug connector is designed for.0 to 3.0 mm pnel thickness. COMBICON Select The COMBICON serch engine with CAD downloding Note: In complince with DIN EN 6984, COMBICON plug connectors come without switching cpcity. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. Fst snp-lock mechnism Screw fstening COMBICON Select the printed circuit bord connection softwre supports your workflow from the PCB nd housing lyout to the ordering process with: Systemtic nd fst selection of products Universl Internet ided engineering with extensive CAD downloding Esy-to-use e-shopping functions. select.phoenixcontct.com/combicon PHOENIX CONTACT GmbH & Co. KG 383 Blomberg, Germny Phone +49 5 35 3-00 Fx +49 5 35 3-4 00 www.phoenixcontct.com Locl Contct: www.phoenixcontct.com/slesnetwork
DFK-PC 6/...-ST-0,6 0.6 mm Pitch POWER COMBICON plugs, 0.6 mm pitch, color: green 0.6 3 0.3 6.80 8 7. 9 8.8 DFK-PC 6/ -ST-0,6 DFK-PC 6/ 3-ST-0,6 DFK-PC 6/ 4-ST-0,6 DFK-PC 6/ 5-ST-0,6 DFK-PC 6/ 6-ST-0,6 DFK-PC 6/ 7-ST-0,6 DFK-PC 6/ 8-ST-0,6 DFK-PC 6/ 9-ST-0,6 703373 703386 703399 703409 7034 70345 703438 70344 nd heder, red insulting mteril CP-HCC 4 60007 Screws, (DIN ISO 7049 screw ST,9 x 9,5), for fixing feed-through terminl blocks on the DFK-PC 6-SS 705449 0 housing wll to ctute the terminl screws SZS,0 x 4,0 066 0 Mrker crd, with 0 pcs., 0-section mrker strips, white, self-dhesive, for 00 terminl blocks SK 0/5 (see COMBICON ctlog) CRIMPFOX 6 S 07983 Technicl dt Pitch 0.6 Technicl dt in ccordnce with IEC/ DIN VDE Insulting mteril group I Surge voltge ctegory / contmintion clss / III / 3 III / II / Rted voltge [V] 000 000 000 Rted surge voltge [kv] 8 8 6 Nominl current / cross section [A] / [mm ] 57 ) / 0 Mximum lod current / cross section [A] / [mm ] 76 ) / 6 Connection cpcity Solid / strnded / conductor sizes [mm ] / [mm ] / AWG 0.75-6 / 0.75-6 / 8-6 Strnded with ferrule without / with plstic sleeve [mm ] 0,5-6 ) / 0,5-6 ) Multiple connection ( conductors with sme cross section) Solid / strnded [mm ] 0.75-6 / 0.75-6 Strnded with ferrules without plstic sleeve [mm ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm ] 0.5-6 Stripping length 4 Internl cylindricl gge (IEC 60947-) A6 Screw thred M4 Tightening torque [Nm].5 -.7 Insultion mteril Inflmmbility clss cc. to UL 94 Approvl dt (UL/CUL nd CSA) Usegroup B [V] / [A] / AWG 600 / 55 / 0-6 Usegroup C [V] / [A] / AWG 600 / 55 / 0-6 ) Observe derting curve ) Only in connection with CRIMPFOX 6 S +9,6 +3,6 44,,4 9 0,6 PHOENIX CONTACT pge of 5
DFK-PC 6/...-STF-0,6 0.6 mm Pitch POWER COMBICON feed-throuhg plugs, 0.6 mm pitch, color: green, with screw flnge 0.6 3 0.3 6.80 8 7. 9 8.8 DFK-PC 6/ -STF-0,6 DFK-PC 6/ 3-STF-0,6 DFK-PC 6/ 4-STF-0,6 DFK-PC 6/ 5-STF-0,6 DFK-PC 6/ 6-STF-0,6 DFK-PC 6/ 7-STF-0,6 DFK-PC 6/ 8-STF-0,6 DFK-PC 6/ 9-STF-0,6 703454 703467 703470 703483 703496 7036 70359 7035 nd heder, red insulting mteril CP-HCC 4 60007 Screws, (DIN ISO 7049 screw ST,9 x 9,5), for fixing feed-through terminl blocks on the DFK-PC 6-SS 705449 0 housing wll to ctute the terminl screws SZS,0 x 4,0 066 0 Mrker crd, with 0 pcs., 0-section mrker strips, white, self-dhesive, for 00 terminl blocks SK 0/5 (see COMBICON ctlog) CRIMPFOX 6 S 07983 Technicl dt Pitch 0.6 Technicl dt in ccordnce with IEC/ DIN VDE Insulting mteril group I Surge voltge ctegory / contmintion clss / III / 3 III / II / Rted voltge [V] 000 000 000 Rted surge voltge [kv] 8 8 6 Nominl current / cross section [A] / [mm ] 57 ) / 0 Mximum lod current / cross section [A] / [mm ] 76 ) / 6 Connection cpcity Solid / strnded / conductor sizes [mm ] / [mm ] / AWG 0.75-6 / 0.75-6 / 8-6 Strnded with ferrule without / with plstic sleeve [mm ] 0,5-6 ) / 0,5-6 ) Multiple connection ( conductors with sme cross section) Solid / strnded [mm ] 0.75-6 / 0.75-6 Strnded with ferrules without plstic sleeve [mm ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm ] 0.5-6 Stripping length 4 Internl cylindricl gge (IEC 60947-) A6 Screw thred M4 Tightening torque [Nm].5 -.7 Insultion mteril Inflmmbility clss cc. to UL 94 Approvl dt (UL/CUL nd CSA) Usegroup B [V] / [A] / AWG 600 / 55 / 0-6 Usegroup C [V] / [A] / AWG 600 / 55 / 0-6 ) Observe derting curve ) Only in connection with CRIMPFOX 6 S +45,5 +39,5 44,,4 9 0,6 0,6 PHOENIX CONTACT pge 3 of 5
DFK-PC 6/...-STF-SH-0,6 0.6 mm Pitch POWER COMBICON feed-throuhg plugs, 0.6 mm pitch, color: green, shielded version, with screw flnge 0.6 3 0.3 6.80 8 7. 9 8.8 DFK-PC 6/ -STF-SH-0,6 DFK-PC 6/ 3-STF-SH-0,6 DFK-PC 6/ 4-STF-SH-0,6 DFK-PC 6/ 5-STF-SH-0,6 DFK-PC 6/ 6-STF-SH-0,6 DFK-PC 6/ 7-STF-SH-0,6 DFK-PC 6/ 8-STF-SH-0,6 DFK-PC 6/ 9-STF-SH-0,6 70366 70369 70363 703645 703658 70366 703674 703687 nd heder, red insulting mteril CP-HCC 4 60007 Screws, (DIN ISO 7049 screw ST,9 x 9,5), for fixing feed-through terminl blocks on the DFK-PC 6-SS 705449 0 housing wll to ctute the terminl screws SZS,0 x 4,0 066 0 Mrker crd, with 0 pcs., 0-section mrker strips, white, self-dhesive, for 00 terminl blocks SK 0/5 (see COMBICON ctlog) CRIMPFOX 6 S 07983 Technicl dt Pitch 0.6 Technicl dt in ccordnce with IEC/ DIN VDE Insulting mteril group I Surge voltge ctegory / contmintion clss / III / 3 III / II / Rted voltge [V] 000 000 000 Rted surge voltge [kv] 8 8 6 Nominl current / cross section [A] / [mm ] 57 ) / 0 Mximum lod current / cross section [A] / [mm ] 76 ) / 6 Connection cpcity Solid / strnded / conductor sizes [mm ] / [mm ] / AWG 0.75-6 / 0.75-6 / 8-6 Strnded with ferrule without / with plstic sleeve [mm ] 0,5-6 ) / 0,5-6 ) Multiple connection ( conductors with sme cross section) Solid / strnded [mm ] 0.75-6 / 0.75-6 Strnded with ferrules without plstic sleeve [mm ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm ] 0.5-6 Stripping length 4 Internl cylindricl gge (IEC 60947-) A6 Screw thred M4 Tightening torque [Nm].5 -.7 Insultion mteril Inflmmbility clss cc. to UL 94 Approvl dt (UL/CUL nd CSA) Usegroup B [V] / [A] / AWG 600 / 55 / 0-6 Usegroup C [V] / [A] / AWG 600 / 55 / 0-6 ) Observe derting curve ) Only in connection with CRIMPFOX 6 S +0,3 +45,5 +39,5 44,,4 5,08 4,5,7 4, 9 0,6 0,6 5,08 9,6 PHOENIX CONTACT pge 4 of 5
+7,8 +0, +3,6 +0, + +0, TNR: 0975-00-en/3.05.06 PHOENIX CONTACT 006 3,4 +0, 3,4 +0, 3,5 Sheet metl cutout for snp-lock mechnism for "ST" versions Sheet metl cutout for screw connection for "ST" versions +33,7 +0, +39,5 +0, +7,9 +0, 3,4 +0, 3,4 +0, 3,5 Sheet metl cutout for snp-lock mechnism for "STF" versions Sheet metl cutout for screw connection for "STF" versions Derting curve Type: PC 6/...-ST-0,6 with DFK-PC 6/...-ST-0,6 Connected conductor cross section = 6 mm Reduction fctor = 0.8 Number of positions = see digrm Current strength [A] 04 96 88 80 7 64 56 48 40 3 4 6 8 0 = -pos. = 5-pos. 3 = 9-pos. 3 0 0 40 60 80 00 Ambient temperture [ C] PHOENIX CONTACT pge 5 of 5