atalog 9M-TK-19- Filter / Regulator Numbering System Filter / Regulator Numbering System Unit Thread Pipe Preset / Function Family Type Size Options Options Options Options Pressure Limited 2 Unit Function Filter / Regulator Family Miniature Thread Type NPT SPP Pipe Size 1 1/8" 2 " Note: When selecting from the options columns, please enter letters in alphabetical order for positions 6, 7, 8 and 9. For example: - 1 - M Note: in position 6, 7, 8 and 9 signifies standard product. (Poly owl, Manual rain, 2 to 125, ) Spring Type by Preset / Limited Pressure: For Preset / Limited Pressure 1 to 25 use PSI Spring For Preset / Limited Pressure 26 to 5 use 6 PSI Spring For Preset / Limited Pressure 51 to 9 use 125 PSI Spring Options Standard Piston rain G** Pressure Gauge J* Preset, djustable K* Preset, Non-dj. / poxy L 1 to 6 PSI, M* Metal owl N 2 to 125 PSI, Non- P 1 to PSI, Q 1 to 15 PSI, R* Pressure Limiter S 1 to 6 PSI, Non- T 1 to PSI, Non- U 1 to 15 PSI, Non- * Inlet pressure is 1. For other pressures, consult factory. ** Not available with SPP thread type. Must specify preset or limited pressure. Options lank No Preset or Limiter Option XXX XXX (xample: 65 = 65 ) Note: Pressure Range 1 to 9 in 5 Increments Unit Pipe Function Family Size Options Options Options 6-2 - Unit Function ombinations Family 6 ompact Pipe Size NPT SPP Size 2 2 " /8" 4 4 1/2" Options Standard / F uto rain G Metal owl with Sight Gauge 1 L Low Pressure M Metal owl N Non- iaphragm 1 For miniature family units, G option is a pressure gauge. For compact, G option is a metal bowl with sight gauge. F Series Filters, Type 5 micron elements: ll Wilkerson Type 5 micron elements meet or exceed ISO lass for maximum particle size and concentration of solid contaminants. Note: When selecting from the options columns, please enter letters in alphabetical order for positions 6, 7, and 8. For example: 6-2- Note: in positions 6, 7 and 8 signifies standard product. Note: ll classes above refer to International Standards Organization (ISO) standard 857-1, pertaining to maximum particle size and concentration of solid contaminants, and maximum oil content. 198
atalog 9M-TK-19- Filter / Regulator Numbering System / Series Filter / Regulator Numbering System Unit Thread Pipe iaphragm owls / Function Family Type Size Function rains Options Options - 2 - F K G Unit Function Filter / Regulator Family rass Miniature luminum Miniature Thread Type NPT SPP 1 Pipe Size 1 1/8" 2 " Options None G Pressure Gauge R Remote ir Piloted T Tamper Resistant Regulator dj Z rass onnet and Hex djustment Knob Options None G Pressure Gauge R Remote ir Piloted T Tamper Resistant Regulator dj Z rass onnet and Hex djustment Knob owls rains Plastic Metal Manual rain K L Piston rain R S Spring Range iaphragm 1 to 25 1 to 6 2 to 125 Function Fluorocarbon (.7 to 1.7 ) (.7 to 4.1 ) (.14 to 8.6 ) No F Yes J K L Non-relieving 1 No P W R Yes V X Y NOT: Standard pressure adjustment is plastic snap lock knob and plastic bonnet with plastic panel mount nut. 1 ISO, R228 (G Series) Type 5 micron elements: ll Wilkerson Type 5 micron elements meet or exceed ISO lass for maximum particle size and concentration of solid contaminants. Note: ll classes above refer to International Standards Organization (ISO) standard 857-1, pertaining to maximum particle size and concentration of solid contaminants, and maximum oil content. Note: When selecting from the options columns, please enter letters in alphabetical order for positions 8 and 9. For example: -2-F K G T 199
atalog 9M-TK-19- (Revised 6-1-12) Filter / Regulator Numbering System Filter / Regulator Numbering System Filter / Preset Unit Thread Pipe Regulator owls / Pressure Function Family Type Size ombo rains Options Options Limiter 1 2-2 - F K R XXX Unit Function Filter / Regulator T Precision Filter / Regulator Family 12 Sub-ompact Thread Type NPT SPP 1 Pipe Size 2 " /8" Options R 5 Micron w/ Gauge S 5 Micron w/o Gauge Options None J djustable, Preset K Non-djustable, Preset M Pressure Limiter, djustable N Pressure Limiter, Non-djustable owls / rains Plastic Metal w/ No Metal w/ rains w/ Guard Sight Gauge Sight Gauge Manual rain K X L Piston rain R M S Preset Pressure Limiter lank None XXX Preset Pressure, 5 XXX Pressure Limited, 5 Spring Range iaphragm to 15 to 6 to 125 to 2 4 Function ( to 1. ) ( to 4.1 ) ( to 8.6 ) ( to 1.7 ) 7 F H Non-relieving 6 W R 1 ISO, R228 (G Series). Inlet pressure is 1. For other pressures, contact factory. 4 to 2 PSI ( to 1,8 ) pressure range available only on units with metal bowl. 5 vailable Preset / Pressure Limited Range, 1 to 9 in 5 increments. For higher pressures, contact factory. (xample 65 = 65 ). Spring Type by Preset / Limited Pressure: For Preset / Limited Pressure 1 to 25 use PSI Spring For Preset / Limited Pressure 26 to 5 use 6 PSI Spring For Preset / Limited Pressure 51 to 12 use 125 PSI Spring For Preset / Limited Pressure 121 to 19 use 2 PSI Spring 6 Not available on T12. 7 Not available on 12. Type 5 micron elements: ll Wilkerson Type 5 micron elements meet or exceed ISO lass for maximum particle size and concentration of solid contaminants. Note: ll classes above refer to International Standards Organization (ISO) standard 857-1, pertaining to maximum particle size and concentration of solid contaminants, and maximum oil content. 2
atalog 9M-TK-19- Filter / Regulator Numbering System Filter / Regulator Numbering System Unit Thread Pipe Filter / Regulator owls / Function Family Type Size ombo rains Options Options 1 8 - - F K G Unit Function Filter / Regulator ombination Family 8 Miniature 18 ompact 28 Standard 9 Jumbo Thread Type NPT SPP 2 ode Pipe Size Series 8 18 28 9 1 1/8" X 2 " X X /8" X X 4 1/2" X X 6 /4" X X 8 1" X Options None Tamper Resistant Regulator dj G Pressure Gauge 6 P Metal Panel Nut (8, 18 & 28 Only) Options None Tamper Resistant Regulator dj G Pressure Gauge 6 P Metal Panel Nut (8, 18 & 28 Only) owls Plastic Metal w/ No Metal w/ rains w / Guard 1 Sight Gauge 1 Sight Gauge 4 None (8, 18 & 28 Only) 1/8 NPT Female (18 & 28 Only) U F utomatic rain G H (18, 28 & 9 Only) Manual rain K M L Piston rain (8 Only) R S Flex rain (18 & 28 Only) T Spring Range iaphragm to 1 to 6 1 to 125 to 25 1, 5 Function 7 Fluorocarbon 1 ( to 2.1 ) ( to 4.1 ) ( to 8.6 ) ( to 17.2 ) No F G Yes J K L 1 M Non-relieving 1 No P W R S Yes V X Y Z 1 Not vailable on 9 Series. 2 ISO, R228 (G Series). Tamper resistant kit not installed. Kit shipped loose in carton, for 8, 18 & 28 Series. 4 8 Filter / Regulator has an all metal bowl (no sight gauge). 5 For 18 & 28 Series Only. 6 For 8 Series only: G in position 8 or 9 is for unit w/ flush-mounted pressure gauge. Units without gauge have 1/8" threaded gauge ports, and a center back mounted pressure gauge must be ordered separately. F Series Filters, Type 5 micron elements: ll Wilkerson Type 5 micron elements meet or exceed ISO lass for maximum particle size and concentration of solid contaminants. Note: ll classes above refer to International Standards Organization (ISO) standard 857-1, pertaining to maximum particle size and concentration of solid contaminants, and maximum oil content. Note: When selecting from the options columns, please enter letters in alphabetical order, for positions 7, 8, 9. For example: 1 8 - - F K 21
atalog 9M-TK-19- Filter / Regulator -2- Features xcellent Water Removal fficiency Unbalanced Poppet Standard Solid ontrol Piston for xtended Life Space Saving Package offers both Filter and Regulator features in One Integral Unit Non-rising djustment Knob Two Full Flow 1/8" Gauge Ports NOT: 1.218 ia. (1mm) hole required for panel mounting. Specifications Flow apacity* 1/8 16 SFM (7.5 dm /s) 18 SFM (8.5 dm /s) Gauge Ports (2) 1/8 Inch Port Threads 1/8, Inch Pressure & Temperature Ratings Plastic owl to 15 ( to 1. ) 2 F to 125 F ( to 52 ) Metal owl to 25 ( to 17.2 ) 2 F to 175 F ( to 8 ) Secondary Pressure Ranges Standard Pressure 2 to 125 ( to 8.6 ) Medium Pressure 1 to 6 ( to 4.1 ) Medium Pressure 1 to ( to 2.1 ) Low Pressure 1 to 15 ( to 1. ) Weight.4 lb. (.18 kg) * Inlet pressure 1 (6.9 ). Secondary pressure 9 (6.2 ). and 1 pressure drop. Materials of onstruction djusting Nut djusting Stem & Spring ody onnet, Knob, Seat, Piston, Holder & eflector owls Transparent Metal (Without Sight Gauge) Filter lements 5 Micron (Standard) Manual rain ody & Stem Seals Piston rain Piston & Seals Stem, Seat, daptor & Washers Seals asic 1/8" ody rass Steel Plastic Polycarbonate Plastic Plastic luminum 1/8" NPT Gauge Ports (2) Piston rain ccepts 1/8" Tubing imensions Standard Unit -XX-XXXX With Piston rain Model istance Required F To Remove ll owls Regardless Of rain Option Inches (mm) F 1.62 (41) 1.58 (4) 2.42 (61).79 (96).64 (92) 6.21 (158) 6.6 (154) 1.6 (41) 22
atalog 9M-TK-19- Mini Filter / Regulator Replacement Kits Filter lement Kit, 5 Micron...PS4 Metal owl Piston rain...ps451 Manual rain...ps447 Poly owl Piston rain... PS48 Manual rain...ps44 Poppet / Piston Kits Unbalanced, Non-... PS428P Unbalanced,... PS426P ccessories Gauges ( to 2.1 )... K4515N18 6 ( to 4.1 )... K4515N186 16 ( to 11. )...K4515N1816 Mounting racket Kit* (Includes Panel Mount Nut)... PS417 Panel Mount Nut* Plastic... P78652 Metal...P151 Springs 1 to 15 Range... P1176 1 to Range... P1175 1 to 6 Range... P1174 2 to 125 Range...P117 *Tighten panel mount nut 2.8 to.4 Nm (25 to in-lbs) of torque. UTION: WRNING! Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Secondary Pressure - Secondary Pressure - 6 5 4 2 1 6 5 4 2 1 Secondary Pressure - Secondary Pressure - 1 8 6 4 2 Relief nd Flow haracteristics -1-1/8 Inch Ports 1 (6.9 ) Primary Pressure 4 8 12 16 2 24 28 2 Rated Flow - SFM 1 8 6 4 2 2 4 6 8 1 12 14 Flow - dm /s n Relief nd Flow haracteristics -2- Inch Ports 1 (6.9 ) Primary Pressure 4 8 12 16 2 24 28 2 Rated Flow - SFM 2 4 6 8 1 12 14 Flow - dm /s n Ordering Information Model Type Port Size Plastic owl Metal owl 1/8-1- -1-M Manual rain -2- -2-M Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. 2
atalog 9M-TK-19- asic 1/8" ody Miniature Filter / Regulator rass luminum Specifications Flow apacity* 16 SFM (7.6 dm /s) Maximum Supply Pressure Polycarbonate owl 15 (1.7 ) Metal owl (2.7 ) Operating Temperature Port Size 4 F to 125 F (4.4 to 52 ) NPT / SPP-G 1/8, Standard Filtration 5 Micron Weight.8 lb. (.6 kg) * Inlet pressure 1 (6.9 ). Secondary pressure 75 (5.2 ). Materials of onstruction -2-FK Features ody rass owls Polycarbonate or - Painted lack Manual rain rass iaphragm and Seals lement Holder / eflector / onnet cetal Filter lements Type Polyethylene rass onstruction Handles Most orrosive nvironments Knob cetal Springs Plated Steel Large iaphragm to Valve rea Ratio for Precise Regulation and High Flow apacity Valve ssembly and ottom Plug rass Plastic owl or lack Painted Metal owl High Flow: " -16 SFM Fluorocarbon Seals Optional ia. 7/8" Hex djustment Knob 5/64" Hex Key djustment Screw 1/8" Pilot Port istance Required To Remove ll owls F Option R Option T Option Z NOTS: Panel Nut included, but not shown on dimensional drawing. 1.19" dia. (,2) mm hole required for panel mounting. imensions Model Standard Unit - rass ody -2-XXXX Standard Unit - luminum ody -2-XXXX Inches (mm) Option Option Option R T Z Option Option Option R T Z 1.56 (4) 2.6 (67) 1.9 (27.7) 2.4 (51.8) 2.8 (52.8.6 (92) 6.25 (159) 4.72 5.67 5.71 (119.9) (144.) (145.) 1.58 (4) 1.56 (4) 2.6 (67) 1.9 (27.7) 2.4 (51.8) 2.8 (52.8.6 (92) 6.25 (159) 4.72 5.67 5.71 (119.9) (144.) (145.) 1.58 (4) 24 F
atalog 9M-TK-19- Mini ar Stock Filter / Regulator / Replacement lement and Repair Kits 5 Micron lement...frp-96-86 onnet, Knob, djusting Screw Kit... RRP-96-821 onnet, Tamper Resistant djustment Kit... RRP-96-822 iaphragm and Valve Repair Kit...RRP-96-819 Non-... RRP-96-82 Plastic owl No Guard, Manual Twist rain... GRP-96-88 No Guard, Piston rain... GRP-96-89 Metal owl Manual Twist rain... GRP-96-81 Piston rain...grp-96-811 ccessories Gauge, Pressure to 6 PSI ( to 4.1 ), 1-1/2" ial Face, 1/8" NPT... K4515N186 to 16 PSI ( to 11. ), 1-1/2" ial Face, 1/8" NPT, M...K4515N1816 Manual rain... GRP-96-812 Piston Type rain... GRP-96-81 Panel Mount Nut luminum...rp-96-7 Plastic...RP-96-74 Wall Mounting racket L-Type...GRP-95-147 L-Type with Plastic Panel Mount Nut...GRP-95-747 Secondary Pressure - 6 5 4 2 1 Secondary Pressure - 1 8 6 4 2 UTION: -2-FK (5 Micron lement) 4 8 12 16 2 24 Rated Flow - SFM 2 4 6 8 1 Flow - dm /s n WRNING Inlet Pressure 1 (6.9 )! Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Ordering Information Model Type Port Size 2 to 125 PSI (.14 to 8.6 ) No owl Guard 1 to 6 PSI (.7 to 4.1 ) No owl Guard 1 to 25 PSI (.7 to 1.7 ) No owl Guard 2 to 125 PSI (.14 to 8.6 ) Metal owl 1 to 6 PSI (.7 to 4.1 ) Metal owl 1 to 25 PSI (.7 to 1.7 ) Metal owl Manual rain 1/8" -1-FK -1-K -1-K -1-FL -1-L -1-L " -2-FK -2-K -2-K -2-FL -2-L -2-L Piston rain 1/8" -1-FR -1-R -1-R -1-FS -1-S -1-S " -2-FR -2-R -2-R -2-FS -2-S -2-S Manual rain 1/8" -1-FK -1-K -1-K -1-FL -1-L -1-L " -2-FK -2-K -2-K -2-FL -2-L -2-L Piston rain 1/8" -1-FR -1-R -1-R -1-FS -1-S -1-S " -2-FR -2-R -2-R -2-FS -2-S -2-S Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. 25
atalog 9M-TK-19- asic 1/8" ody Filter / Regulator 8 Specifications Flow apacity* 1/8 djusting Range Pressure Gauge Ports (2)** NPT Plastic owl Maximum Supply Pressure Metal owl Operating Plastic owl Temperature Metal owl 8-1-FKG 8-1-FK Features Space-Saving Integral Filter / Regulator esign 28 SFM (1.2 dm /s) 42 SFM (19.8 dm /s) to ( to 2.1 ) to 6 ( to 4.1 ) to 125 ( to 8.6 ) 1/8 15 (1. ) 25 (17.2 ) 14 to 125 F (-1 to 52 ) 14 to 15 F (-1 to 65.5 ) Port Size NPT / SPP-G Standard Filtration Weight 1/8, 5 Micron.75 lb. (.4 kg) * Inlet pressure 1 (6.9 ). Secondary pressure 9 (6.2 ). ** Non gauge option only. Units with square gauges: -15 to 65.5 (5 F to 15 F) F Series Filters, Type 5 micron elements: ll Wilkerson Type 5 micron elements meet or exceed ISO lass for maximum particle size and concentration of solid contaminants. Unique Flush-mounted Pressure Gauge vailable alanced Valve esign Modern esign and ppearance Materials of onstruction Light Weight djustment Knob ody ody ap onnet owl Plastic owl Metal owl owl Guard iaphragm ssembly Filter lement Panel Nut Seals Plastic owl Metal owl Springs Valve ssembly High Flow apacities Quick-isconnect owl / owl Guard! WRNING Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. G G 8 1 4 cetal S PT Polycarbonate Nylon rass / Polyethylene cetal Steel rass / 16 psi 1 5/2" (4 mm) I.. Tube arb Fitting UTION: 1 owl F Removal 8-XX-FKG 8-XX-FR learance NOTS: Flush mounted gauge kits will not fit units originally purchased with threaded gauge ports. 1.25" ia. (1.7 mm) hole required for panel nut mounting. RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. imensions Models Standard Unit 8-XX-FK utomatic Piston rain 8-XX-FR Inches (mm) 1 1 F G 1.58 (4) 1.7 (4) 2.6 (66).86 (98) 6.46 (164) 1.1 ().85 (21.6) 1.58 (4.) 2.5 (64.) 2.6 (66.).64 (9) 6.24 (159) 1.1 () 1.45 (6.8) 26
atalog 9M-TK-19- ompact Modular Filter / Regulator 8 Replacement owl Kits 8-1-FK Metal owl, Manual rain...grp-96-714 Inlet Pressure = 1 (6.9 ) Plastic owl / owl Guard, Manual rain...grp-96-712 7. 1 Replacement lement Kit Type, 5 Micron... FRP-96-729 Replacement Kits djusting Knob... RRP-16-5- iaphragm ssembly Non-relieving... GRP-96-726... GRP-96-725 Spring, Regulating to ( to 2. )... GRP-95-111 to 6 ( to 4.1 )...GRP-96-718 to 125 ( to 8.5 )...GRP-96-717 Valve ssembly...rrp-96-727 ccessories utomatic Piston rain...grp-96-716 Gauge dapter lock, " NPT,...GP-97-7 (Replaces Flush Mount Gauge) Panel Mount Nut luminum...rp-96-7 Plastic...RP-96-74 Pressure Gauge, Flush Mounted to 6... K4511SR6 to 15...K4511SR15 to 11...K4511SR11 Pressure Gauge, to 6 ( to 4.1 ), 1-1/2" ial Face, 1/8 NPT, M... K4515N186 Pressure Gauge to 16 ( to 11. ), 1-1/2" ial Face, 1/8 NPT, M...K4515N1816 Tamper Resistant Kit...RP-96-75 Wall Mounting racket - -Type... GP-97-1 L-Type... GRP-96-79 SONRY PRSSUR SONRY PRSSUR 6. 5. 4.. 2. 1. 7. 6. 5. 4.. 2. 1. 8 6 4 2 1 8 6 4 2 1 2 SFM 4 8 12 16 dm /s IR FLOW RT 8-2-FK Inlet Pressure = 1 (6.9 ) 1 2 4 SFM 4 8 12 16 2 IR FLOW RT dm /s Ordering Information Model Type Non-relieving Port Size Plastic owl / owl Guard / Manual rain / Without Gauge to ( to.2 ) Plastic owl / owl Guard / Manual rain / Without Gauge to 125 ( to 8.6 ) Plastic owl / owl Guard / Manual rain / With Gauge to 2 ( to 2. ) Plastic owl / owl Guard / Manual rain / With Gauge to 125 ( to 8.6 ) Plastic owl / owl Guard / Manual rain / Low Pressure / Without Gauge to 6 ( to 4.1 ) Plastic owl / owl Guard / utomatic Piston / With Gauge to 125 ( to 8.6 ) 1/8 8-1-K 8-1-FK 8-1-KG 8-1-FKG 8-1-K 8-1-FRG 8-2-K 8-2-FK 8-2-KG 8-2-FKG 8-2-K 8-2-FRG 1/8 8-1-PK 8-1-RK 8-1-PKG 8-1-RKG 8-1-WK 8-1-RRG 8-2-PK 8-2-RK 8-2-PKG 8-2-RKG 8-2-WK 8-2-RRG Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. 27
atalog 9M-TK-19- asic " ody Filter / Regulator 12 Specifications High Flow apacity* 25 scfm (11.8 dm /s) scfm (14.2 dm /s) /8 Gauge Ports (2) NPT / SPP-G Maximum Supply Pressure Plastic owl Metal owl 15 (1. ) 25 (17.2 ) Operating Temperature Plastic owl Metal owl 2 to 125 F ( to 52 ) 2 to 175 F ( to 8 ) Port Size NPT / SPP-G, /8 5 Micron Weight 1.5 lb. (.6 kg) * Inlet pressure 1 (6.9 )., Secondary pressure 9 (6.2 ). 12-2-FKS Materials of onstruction Features djustment Knob Space Saving Package Offers oth Filter and Regulator Features for Optimal Performance xcellent Water Removal fficiency ody Plastic owls Rolling iaphragm for xtended Life Plastic onnet, Internal Parts Plastic owl Metal owl Polycarbonate Removable Non-rising Knob for Tamper Resistance owl Guard Quick Response, and ccurate Pressure Regulation Regardless of hanging Flow or Inlet Pressure iaphragm rain Plastic 5 Micron Standard Steel Filter lement Sintered Plastic Seals Springs Steel Valve ssembly Plastic NOT: Panel Mount Nut sold separately. PU SH " NPT Gauge Ports (2) K Standard Filtration TO L O! WRNING Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. Piston rain UTION: NOT: arb (Piston rain) accepts /16" I tubing. Manual rain istance Required F To Remove ll owls Regardless Of rain Option RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. imensions Model Inches (mm) Standard Unit 12-XX-FKS With F 2. (51) 2.6 (52).16 (8) 5.5 (16) 8.51 (216) 1.77 (45) Manual or Piston rain 28
atalog 9M-TK-19- ompact Modular Filter / Regulator 12 Replacement owl Kits Metal owl Guard... GRP-96-45 Metal owl Manual rain... GRP-96-48 Piston rain... GRP-96-5 Sight Gauge / Manual rain... GRP-96-49 Sight Gauge / Piston rain... GRP-96-52 Plastic owl Manual rain... GRP-96-47 Piston rain... GRP-96-51 Replacement lement Kits 5 Micron... GRP-96-44 4 Micron... GRP-96-4 Replacement Kits onnet ssembly Kit... RRP-96-8 ontrol Knob... RRP-96- Pressure Gauge... K4515N14 6... K4515N146 16...K4515N1416... K4515N14 Service Kit Non-relieving... RRP-96-7... RRP-96-6 Springs, Regulating 1 to (.6 to 2.1 )... RRP-96-1 to 6 (.6 to 4.1 )... RRP-96-2 2 to 125 (.1 to 8.6 )... RRP-96-1 2 to 2 (.1 to 17.2 )... RRP-96-4 ccessories rain Kit Manual rain... GRP-96-4 Piston rain... GRP-96-54 Mounting racket Kit (With Panel Mount Nut)...GP-96-1 Panel Mount Nut, Metal...GP-96-14 Sight Gauge Kit... GRP-96-46 SONRY PRSSUR SONRY PRSSUR 6. 5. 4.. 2. 1. 6. 5. 4.. 2. 1. 1 9 8 7 6 5 4 2 1 1 9 8 7 6 5 4 2 1 12-2-FKS (5 Micron lement) Inlet Pressure: 1 (6.9 ) 1 2 4 5 6 7 SFM 5 1 15 2 25 dm /s IR FLOW RT 12--FKS (5 Micron lement) Inlet Pressure: 1 (6.9 ) 1 2 4 5 6 7SFM 5 1 15 2 25 dm /s IR FLOW RT Ordering Information Model Type Non-relieving Port Size Plastic owl / owl Guard / Without Gauge / Manual rain Plastic owl/ owl Guard / Without Gauge / Piston rain Metal owl / Sight Gauge / With Gauge / Manual rain 12-2-FKS 12-2-FRS 12-2-FLS /8 12--FKS 12--FRS 12--FLS 12-2-RKS 12-2-RRS 12-2-RLS /8 12--RKS 12--RRS 12--RLS Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. 29
atalog 9M-TK-19- asic " ody Precision Filter / Regulator T12 Specifications High Flow apacity* /8 25 scfm (11.8 dm /s) 25 scfm (11.8 dm /s) Gauge Ports (2) NPT / SPP-G Maximum Supply Pressure Plastic owl Metal owl 15 (1. ) 25 (17.2 ) Operating Temperature Plastic owl Metal owl 2 to 125 F ( to 52 ) 2 to 175 F ( to 8 ) Port Size NPT / SPP-G, /8 5 Micron Weight 1.5 lb. (.6 kg) * Inlet pressure 1 (7 ), no flow secondary pressure set 9 (6.2 ), 1 pressure drop at rated flow. T12-2-FKS Features Materials of onstruction Space Saving Package Offers oth Filter and Regulator Features for Optimal Performance djustment Knob Plastic ody xcellent Water Removal fficiency onnet, Internal Parts Rolling iaphragm for xtended Life owls Plastic Plastic owl Metal owl Removable Non-rising Knob for Tamper Resistance Polycarbonate Quick Response, and ccurate Pressure Regulation Regardless of hanging Flow or Inlet Pressure owl Guard Steel iaphragm 5 Micron Standard rain Plastic Filter lement Sintered Plastic Seals Springs Steel Valve ssembly rass PU NOT: Panel Mount Nut sold separately. SH " NPT Gauge Ports (2) K Standard Filtration TO L O! WRNING Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. Piston rain UTION: Manual rain istance Required F To Remove ll owls Regardless Of rain Option NOT: arb (Piston rain) accepts /16" I tubing. RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. imensions Model Inches (mm) Precision Unit T12-XX-FKS F 2. (51) 2.6 (52).16 (8) 5.5 (16) 8.51 (216) 1.77 (45) With Manual or Piston rain 21
atalog 9M-TK-19- ompact Modular Precision Filter / Regulator T12 Replacement owl Kits Metal owl Guard... GRP-96-45 Metal owl Manual rain... GRP-96-48 Piston rain... GRP-96-5 Sight Gauge / Manual rain... GRP-96-49 Sight Gauge / Piston rain... GRP-96-52 Plastic owl Manual rain... GRP-96-47 Piston rain... GRP-96-51 Replacement lement Kits 5 Micron... GRP-96-44 4 Micron... GRP-96-4 Replacement Kits onnet ssembly Kit... RRP-96-8 ontrol Knob...RRP-96-12 Service Kit,... RRP-96-5 Springs, Regulating 1 to 15 (.6 to 1.7 )...RRP-96-11 1 to (.6 to 2.1 )... RRP-96-1 to 6 (.6 to 4.1 )... RRP-96-2 2 to 125 (.1 to 8.6 )... RRP-96-1 2 to 2 (.1 to 17.2 )... RRP-96-4 ccessories rain Kit Manual rain... GRP-96-4 Piston rain... GRP-96-54 Gauges ( to 2.1 )... K4515N14 6 ( to 4.1 )... K4515N146 16 ( to 11. )...K4515N1416 ( to 2. )... K4515N14 Mounting racket Kit (With Panel Mount Nut)...GP-96-1 Panel Mount Nut, Metal...GP-96-14 Sight Gauge Kit... GRP-96-46 Secondary Pressure - Secondary Pressure - Secondary Pressure - 2 1.5 1.5 2.5 2 1.5 1.5 6 5 4 2 1 Secondary Pressure - Secondary Pressure - Secondary Pressure - 25 2 15 1 5 5 Flow haracteristics T12-2-KS Inch Ports, PSI Spring Primary Pressure 1 (6.9 ) 1 15 2 25 5 4 Flow - SFM 2 4 6 8 1 12 14 16 18 Flow - dm /s n 5 45 4 5 25 2 15 1 5 1 5 9 8 7 6 5 4 2 Flow haracteristics T12-2-KS Inch Ports, 6 PSI Spring Primary Pressure 1 (6.9 ) 1 15 2 25 5 4 Flow - SFM 2 4 6 8 1 12 14 16 18 Flow - dm /s n 1 5 Flow haracteristics T12-2-FKS Inch Ports, 125 PSI Spring Primary Pressure 1 (6.9 ) 1 15 2 25 5 4 Flow - SFM 2 4 6 8 1 12 14 16 18 Flow - dm /s n Ordering Information Model Type Port Size Plastic owl / owl Guard / Manual rain Plastic owl/ owl Guard / Piston rain Metal owl / Sight Gauge / Manual rain Metal owl / Sight Gauge / Piston rain T12-2-FKS T12-2-FRS T12-2-FLS T12-2-FSS /8 T12--FKS T12--FRS T12--FLS T12--FSS Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. 211
atalog 9M-TK-19- asic /8" ody Filter / Regulator 18 Specifications Flow apacity* 88 SFM (41.5 dm /s) /8 117 SFM (55.2 dm /s) 1/2 121 SFM (57.1 dm /s) djusting Range Pressure to ( to 2.1 ) to 6 ( to 4.1 ) to 125 ( to 8.6 ) to 25 ( to 17.2 ) NPT / SPP-G Gauge Port (2) Maximum Supply Plastic owl 15 (1. ) Pressure Metal owl 25 (17.2 ) Operating Plastic owl -1 to 125 F (-25 to 52 ) Metal owl -1 to 15 F (-25 to 65.5 ) Temperature Port Size NPT / SPP-G, /8, 1/2 Standard Filtration 5 Micron 1.48 lb. (.67 kg) Weight 18-2-FKG Features * Inlet pressure 1 (6.9 ). Secondary pressure 9 (6.2 ). 5 Micron Filtration F Series Filters, Type 5 micron elements: ll Wilkerson Type 5 micron elements meet or exceed ISO lass for maximum particle size and concentration of solid contaminants. alanced Valve esign Spring Loaded iaphragm Materials of onstruction 1/2" NPT / SPP-G Over-Ported djustment Knob cetal ody ody ap S owl Plastic owl Polycarbonate Metal owl luminum owl Guard Nylon iaphragm ssembly / lement Retainer / affle cetal Filter lement Sintered Polyethylene Panel Nut cetal Seals Plastic owl Metal owl Sight Gauge Metal owl Polyamide (Nylon) Springs Main Regulating / Valve Steel / S.S. Valve ssembly rass / Quick-isconnect owl / owl Guard Light Weight High Flow apacities! WRNING Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. H G UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Use /8" or 1mm Flex Tubing utomatic rain F owl Removal learance.19" (4 mm) I.. Tube arb Fitting Manual rain imensions Models Inches (mm) Standard Unit with Manual rain 18-XX-FK utomatic rain 18-XX-FG Metal owl with Sight Gauge / Manual rain Metal owl with Sight Gauge / utomatic rain 212 F G H 2.6 (6) 2.6 (6).66 (9) 6.4 (161) 1. (254) 1.6 (41) 1.2 ().74 (95) 2.6 (6) 2.6 (6).66 (9) 6.11 (155) 9.77 (248) 1.6 (41) 1.2 ().74 (95) 2.6 (6) 2.6 (6) 2.7 (69) 2.7 (69).66 (9).66 (9) 6.4 (161) 6.11 (155) 1. (254) 9.77 (248 ) 1.6 (41) 1.6 (41) 1.2 () 1.2 ().74 (95).74 (95)
atalog 9M-TK-19- Intermediate Modular Filter / Regulator 18 Replacement owl Kits Metal owl Sight Gauge, utomatic rain... GRP-96-67 Sight Gauge, Manual rain... GRP-96-66 Plastic owl owl Guard, utomatic rain... GRP-96-65 owl Guard, Manual rain... GRP-96-64 owl Guard, losed ottom... GRP-96-68 Replacement lement Kits Type, 5 Micron...FRP-96-69 Retainer, eflector, and lement Kit...FRP-96-641 Replacement Kits djusting Knob... RRP-16-4- iaphragm ssembly Non-relieving... RRP-96-657... RRP-96-656 Spring, Regulating to ( to 2.1 )... RRP-96-659 to 6 ( to 4.1 )... RRP-96-66 to 125 ( to 8.6 )... RRP-96-661 to 25 ( to 17.2 )... RRP-96-662 Valve ssembly... RRP-96-658 ccessories utomatic rain Fluorocarbon... GRP-95-981... GRP-95-97 rain, Manual Override...GRP-96- Manual rain... GRP-96-685 Panel Mount Nut luminum... RRP-96-67 Plastic... RRP-96-675 Pressure Gauge to, 1-1/2" ial Face, NPT M... K4515N14 to 6, 1-1/2" ial Face, NPT M... K4515N146 to 16, 1-1/2" ial Face, NPT M..K4515N1416 to, 1-1/2" ial Face, NPT M.K4515N14 to 2., 1-1/2" ial Face, G M... K4515G14 to 4.1, 1-1/2" ial Face, G M... K4515G146 to 11, 1-1/2" ial Face, G M...K4515G1416 to 21, 1-1/2" ial Face, G M... K4515G1429 Tamper Resistant Kit... RRP-96-671 Sight Gauge Kit... GRP-96-825 Wall Mounting racket L-Type (ody)... GP-96-64 L-Type (onnet)... GP-96-66 T-Type... GP-96-62 Ordering Information Model Type Manual rain utomatic rain Port Size Plastic owl / owl Guard With Gauge 5 to 125 (.4 to 8.6 ) Plastic owl / owl Guard With Gauge to 6 (.2 to 4.1 ) Metal owl / Sight Gauge With Gauge 1 to 25 (.7 to 17.2 ) 2 4 6 8 Plastic owl / owl Guard Without Gauge 5 to 125 (.4 to 8.6 ) Plastic owl / owl Guard Without Gauge to 6 (.2 to 4.1 ) Metal owl / Sight Gauge Without Gauge 1 to 25 (.7 to 17.2 ) 18-2-FKG 18-2-KG 18-2-GLG 18-2-FK 18-2-K 18-2-GL /8 18--FKG 18--KG 18--GLG 18--FK 18--K 18--GL 1/2 18-4-FKG 18-4-KG 18-4-GLG 18-4-FK 18-4-K 18-4-GL 18-2-FGG 18-2-GG 18-2-GHG 18-2-FG 18-2-G 18-2-GH /8 18--FGG 18--GG 18--GHG 18--FG 18--G 18--GH 1/2 18-4-FGG 18-4-GG 18-4-GHG 18-4-FG 18-4-G 18-4-GH Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. SONRY PRSSUR SONRY PRSSUR SONRY PRSSUR 7. 6. 5. 4.. 2. 1. 7. 6. 5. 4.. 2. 1. 7. 6. 5. 4.. 2. 1. 1 8 6 4 2 1 8 6 4 2 Inlet Pressure = 1 (6.9 ) 18-2-FK SFM 1 2 4 dm /s IR FLOW RT Inlet Pressure = 1 (6.9 ) 2 4 6 8 1 12 14 SFM 1 8 6 4 2 1 2 4 5 6 IR FLOW RT Inlet Pressure = 1 (6.9 ) 18--FK dm /s 2 4 6 8 1 12 14 SFM 1 2 4 5 6 IR FLOW RT 18-4-FK dm /s 21
atalog 9M-TK-19- asic /8" ody Filter / Regulator 6 Specifications Flow apacity* 64. SFM (.2 dm /s) 7. SFM (. dm /s) 7. SFM (. dm /s) /8 1/2 djusting Range Pressure 6-2- Features to 5 ( to.5 ) to 125 ( to 8.6 ) Gauge Port (2) NPT / SPT-Rc Maximum Supply Pressure Plastic owl Metal owl 15 (1. ) 2 (1.8 ) Operating Temperature Plastic owl Metal owl 2 to 125 F ( to 52 ) 2 to 15 F ( to 65.5 ) Port Size NPT / SPP-G, /8, 1/2 Standard Filtration 5 Micron Weight 2.4 lb. (1.1 kg) * Inlet pressure 1 (6.9 ). Secondary pressure 9 (6.2 ). 5 Micron Filtration F Series Filters, Type 5 Micron lements: ll Wilkerson Type 5 micron elements meet or exceed ISO lass for maximum particle size and concentration of solid contaminants. alanced Valve Manual Flex rain Integral Plastic owl / owl Guard Materials of onstruction Quick-isconnect owl ody onnet, Knob PT! WRNING owls Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. G F Plastic owl Metal owl Polycarbonate iaphragm / Filter lement Polyethylene Panel Nut cetal Seals Plastic owl Metal owl Fluorocarbon Stem, lement Retainer and eflector cetal Springs Steel Valve ssembly rass / UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. NOT: 1.1" ia. (. mm) hole required for panel nut mounting. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. imensions Models Standard Unit 6-XX- utomatic rain 6-XX-F Metal owl 6-XX-M Metal owl with Sight Gauge 6-XX-G Inches (mm) F G. (76) 2.64 (67).95 (1) 5.4 (17.9) 9.8 (28) 1.4 (4) 4.18 (16). (76) 2.64 (67).95 (1) 5.55 (14.9) 9.5 (241) 1.4 (4) 4.18 (16). (76) 2.64 (67).95 (1) 6.5 (15.7) 1. (254) 1.4 (4) 4.18 (16). (76) 2.64 (67).95 (1) 6.15 (156) 1.1 (256.5) 1.4 (4) 4.18 (16) 214
atalog 9M-TK-19- Intermediate Filter / Regulator 6 Replacement owl Kits Metal owl utomatic Float rain...frp-95-95 rass Petcock rain... FRP-95-178 Metal owl / Sight Gauge, rass Petcock rain...grp-95-1 Plastic owl, Flex Tip rain... FRP-95-17 Plastic owl / owl Guard utomatic Float rain... FRP-95-15 Flex Top rain... FRP-95-14 Replacement lement Kits Type, 5 Micron w/ owl O-Ring... FRP-95-16 Replacement Kits iaphragm ssembly Non-relieving...RRP-96-216 Self-relieving...RRP-96-21 Spring, Regulating to 5 ( to.4 ) lue olor... RRP-95-222 to 125 ( to 8.5 ) Silver olor...rrp-95-224 ccessories utomatic Mech. rain, 1/8 NPT Fluorocarbon... GRP-95-981... GRP-95-97 Manual Flex Tip rain... FRP-95-61 Wall Mounting racket Gauge Port dapter, NPT... RRP-95-59 L-Type...GP-95-12 rain, Manual Override for uto Float rain, 1/8 NPT...GRP-96- Gauge, Pressure, 2" ial Face, NPT M to 6 ( to 4.1 )... K452N146W to 16 ( to 11. )...K452N1416W to ( to 21 )... K452N14W Panel Nut, Plastic... GP-95-2 Tamper Resistant Kit...RP-95-6 SONRY PRSSUR SONRY PRSSUR SONRY PRSSUR 6. 4. 2. 6. 4. 2. 6. 4. 2. 1 8 6 4 2 1 8 6 4 2 1 8 6 4 2 Inlet Pressure, 1 (6.9 ) Inlet Pressure, 1 (6.9 ) Inlet Pressure, 1 (6.9 ) 6-2- 1 2 4 5 6 7 8 1 SFM 5 1 15 2 25 5 4 dm /s IR FLOW RT 6-- 1 2 4 5 6 7 8 1 SFM 5 1 15 2 25 5 4 dm /s IR FLOW RT 6-4- Note: Gauge not included, order separately by accessory number. 1 2 4 5 6 7 8 1 SFM Ordering Information Model Type Manual rain utomatic rain Port Size Plastic owl / owl Guard to 125 ( to 8.6 ) Metal owl to 125 ( to 8.6 ) 5 1 15 2 25 5 4 dm /s IR FLOW RT Metal owl w/ Sight Gauge to 125 ( to 8.6 ) Metal owl Low Pressure to 5 ( to.4 ) 6-2- 6-2-M 6-2-G 6-2-LM /8 6-- 6--M 6--G 6--LM 1/2 6-4- 6-4-M 6-4-G 6-4-LM 6-2-F 6-2-FM 6-2-FG 6-2-FLM /8 6--F 6--FM 6--FG 6--FLM 1/2 6-4-F 6-4-FM 6-4-FG 6-4-FLM Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. 215
atalog 9M-TK-19- asic /8" ody Precision Filter / Regulator P5 / P6 Specifications 28. SFM (1.2 dm /s) 19. SFM (9. dm /s) Flow apacity* P5 P6 Gauge Port (2) NPT / SPT-Rc Maximum Supply Pressure Plastic owl Metal owl Port Size NPT / SPP-G Precision Filter / Regulator Operating Temperature Plastic owl Metal owl The P5 / P6 models are general purpose regulators specifically designed for applications that require reliable performance and accurate pressure control. * Inlet pressure 1 (6.9 ). Secondary pressure P5, 15 (1. ); P6, 45 (.1 )., /8, 1/2 2 to 125 F ( to 52 ) 2 to 15 F ( to 65.5 ) 2.4 lb. (1.1 kg) F Series Filters, Type 5 micron elements: ll Wilkerson Type 5 micron elements meet or exceed ISO lass for maximum particle size and concentration of solid contaminants. Stable Output spirator esign Minimizes roop at Higher Flow Levels Materials of onstruction ccuracy High iaphragm-to-valve-rea Ratio ombined with Unbalanced Valve Provides High Precision with Minimal Initial Pressure roop ody onnet, Knob PT owls Quality ir 5 Micron Filtration for Superior Protection of ritical ownstream quipment asy Maintenance May be isassembled and Serviced without Removal from ir Line ompetitive ompact, Integral Filter / Regulator an be Used Where Limited Space or Lower ost is Required G 15 (1. ) 2 (1.8 ) Weight P5 / P6-2- Features Plastic owl Metal owl Polycarbonate iaphragm / Filter lement Polypropylene Panel Nut cetal Seals Plastic owl Metal owl Fluorocarbon Springs Steel Stem, lement Retainer and eflector cetal Valve ssembly F rass /! WRNING Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. NOT: 1.1" ia. (. mm) hole required for panel nut mounting. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. imensions Models Standard Unit P5-XX- / P6-XX- utomatic rain P5-XX-F / P6-XX-F Metal owl P5-XX-M / P6-XX-M utomatic rain P5-XX-G / P6-XX-G Inches (mm) F G. (76) 2.64 (67).95 (1) 5.4 (17.9) 9.8 (28) 1.4 (4) 4.18 (16). (76) 2.64 (67).95 (1) 5.55 (14.9) 9.5 (241) 1.4 (4) 4.18 (16). (76) 2.64 (67).95 (1) 6.5 (15.7) 1. (254) 1.4 (4) 4.18 (16). (76) 2.64 (67).95 (1) 6.15 (156) 1.1 (256.5) 1.4 (4) 4.18 (16) 216
atalog 9M-TK-19- Intermediate Precision Filter / Regulator P5 / P6 Replacement owl Kits P5-2- Metal owl utomatic rain... PRP-96-6 Manual rain...prp-95-7 Metal owl / Sight Gauge, rass Petcock rain...prp-95-71 Plastic owl, FlexTip rain... FRP-95-17 Plastic owl / owl Guard utomatic rain... FRP-95-15 FlexTip rain... FRP-95-14 Replacement lement Kits SONRY PRSSUR 1.2 1..8.6.4 15 1 5 Inlet Pressure, 1 (6.9 ) Type, 5 Micron... FRP-95-16.2 Replacement Kits iaphragm ssembly Non-relieving,...PRP-95-55 Self-relieving,...PRP-95-25 Spring, Regulating to 15 (1 )... RRP-95-2 to (2,1 )...RRP-95-916 to 5 ( to,4 )... RRP-95-222 to 125 ( to 8,5 )...RRP-95-224 ccessories utomatic Mechanical rain 1/8 NPT, Fluorocarbon... GRP-95-981 1/8 NPT,... GRP-95-97 rain, Manual Override for uto Float rain, 1/8 NPT...GRP-96- FlexTip rain... FRP-95-61 Gauge, Pressure, 2" ial Face, NPT, M to ( to 2,1 )... K452N14W to 6 ( to 4 )... K452N146W to 12 ( to 8, )...K452N1416W SONRY PRSSUR. 2. 1. 4 2 1 5 1 4 8 12 16 15 2 4 6 8 1 12 Inlet Pressure, 1 (6.9 ) IR FLOW RT 2 25 SFM dm /s P6-2- SFM Panel Nut, Plastic... GP-95-2 Tamper Resistant Kit...RP-95-6 2 4 6 IR FLOW RT dm /s Wall Mounting racket Gauge Port dapter, NPT... RRP-95-59 L-Type w/panel Mount Nut...GP-95-11 Ordering Information Model Type Port Size Standard Unit to 15 ( to 1 ) Standard Unit to 5 ( to.4 ) utomatic Mechanical rain Sight Gauge High Pressure to 125 ( to 8.6 ) Low Pressure to ( to 2.1 ) Metal owl Fluorocarbon Seals P5-2- P5 1/2 P5-4- /8 P5-- P6-2- P6-2-F P6-2-G P6-2-H P6-2-L P6-2-M P6-2-V P6 /8 P6-- P6--F P6--G P6--H P6--L P6--M P6--V 1/2 P6-4- P6-4-F P6-4-G P6-4-H P6-4-L P6-4-M P6-4-V P6-2-N P6-2-FN P6-2-GN P6-2-HN P6-2-LN P6-2-MN P6-2-VN Non-relieving /8 P6--N P6--FN P6--GN P6--HN P6--LN P6--MN P6--VN 1/2 P6-4-N P6-4-FN P6-4-GN P6-4-HN P6-4-LN P6-4-MN P6-4-VN Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. 217
atalog 9M-TK-19- asic 1/2" ody Filter / Regulator 28 Specifications Flow apacity* /8 14 SFM (66.1 dm /s) 1/2 165 SFM (77.9 dm /s) /4 175 SFM (82.6 dm /s) djusting Range Pressure to ( to 2.1 ) to 6 ( to 4.1 ) to 125 ( to 8.6 ) to 25 ( to 17.2 ) NPT / SPP-G Gauge Port (2) Maximum Supply Plastic owl 15 (1. ) Pressure Metal owl 25 (17.2 ) Operating Plastic owl -1 to 125 F (-25 to 52 ) Metal owl -1 to 15 F (-25 to 65.5 ) Temperature Port Size NPT / SPP-G /8, 1/2, /4 Standard Filtration 5 Micron 2.45 lb. (1.1 kg) Weight 28--FKG Features * Inlet pressure 1 (6.9 ). Secondary pressure 9 (6.2 ). 5 Micron Filtration alanced Valve esign Spring Loaded iaphragm /4" NPT / SPP-G Over-Ported Quick-isconnect owl / owl Guard Light Weight High Flow apacities F Series Filters, Type 5 micron elements: ll Wilkerson Type 5 micron elements meet or exceed ISO lass for maximum particle size and concentration of solid contaminants. Materials of onstruction djustment Knob cetal ody ody ap S owls Plastic owl Polycarbonate Metal owl luminum iaphragm ssembly / lement Retainer / affle cetal Filter lement Sintered Polyethylene Panel Nut cetal Seals Plastic owl Metal owl Sight Gauge Metal owl Polyamide (Nylon) Springs Main Regulating / Valve Steel / S.S. Valve ssembly rass /! WRNING Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. H G UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. utomatic rain Use /8" or 1mm Flex Tubing imensions owl F Removal learance.19" (4 mm) I.. Tube arb Fitting Models Manual rain Inches (mm) Standard Unit with Manual rain 28-XX-FK utomatic rain 28-XX-FG Metal owl with Sight Gauge / Manual rain Metal owl with Sight Gauge / utomatic rain 218 F G H 2.9 (74) 2.9 (74) 4.9 (14) 7.5 (187) 11.44 (291) 2. (51) 1.44 (7) 4.27 (18) 2.9 (74) 2.9 (74) 4.9 (14) 7.12 (181) 11.21 (285) 2. (51) 1.44 (7) 4.27 (18) 2.9 (74) 2.9 (74).2 (82).2 (82) 4.9 (14) 4.9 (14) 7.5 (187) 7.12 (181) 11.44 (291) 11.21 (285) 2. (51) 2. (51) 1.44 (7) 1.44 (7) 4.27 (18) 4.27 (18)
atalog 9M-TK-19- Filter / Regulator 28 Replacement owl Kits Metal owl Sight Gauge, utomatic rain... GRP-96-645 Sight Gauge, Manual rain... GRP-96-644 Plastic owl owl Guard, utomatic rain... GRP-96-64 owl Guard, Manual rain... GRP-96-642 owl Guard, losed ottom... GRP-96-652 Replacement lement Kits Type, 5 Micron...FRP-96-65 lement, eflector, Retainer kit...frp-96-28 Replacement Kits djusting Knob...RRP-16-41- iaphragm ssembly Non-relieving... RRP-96-987... RRP-96-986 Spring, Regulating to ( to 2.1 )...RRP-96-16 to 6 ( to 4.1 )...RRP-96-164 to 125 ( to 8.6 )...RRP-96-165 to 25 ( to 17.2 )...RRP-96-166 Valve ssembly... RRP-96-49 ccessories utomatic rain Fluorocarbon... GRP-95-981... GRP-95-97 Manual rain... GRP-96-685 Panel Mount Nut luminum...rrp-96-674 Plastic...RRP-96-676 Pressure Gauge to, 1-1/2" ial Face, NPT M... K4515N14 to 6, 1-1/2" ial Face, NPT M... K4515N146 to 16, 1-1/2" ial Face, NPT M..K4515N1416 to, 1-1/2" ial Face, NPT M.K4515N14 to 2., 1-1/2" ial Face, G M... K4515G14 to 4.1, 1-1/2" ial Face, G M... K4515G146 to 11, 1-1/2" ial Face, G M...K4515G1416 to 21, 1-1/2" ial Face, G M... K4515G1429 Tamper Resistant Kit... RRP-96-672 Sight Gauge Kit... GRP-96-825 Wall Mounting racket L-Type (ody)... GP-96-65 L-Type (onnet)... GP-96-67 T-Type... GP-96-62 Ordering Information Model Type Manual rain utomatic rain Port Size Plastic owl / owl Guard With Gauge 5 to 125 (.4 to 8.6 ) Plastic owl / owl Guard With Gauge to 6 (.2 to 4.1 ) SONRY PRSSUR SONRY PRSSUR SONRY PRSSUR 7. 6. 5. 4.. 2. 1. 7. 6. 5. 4.. 2. 1. 7. 6. 5. 4.. 2. 1. Metal owl / Sight Gauge With Gauge 1 to 25 (.7 to 17.2 ) 1 8 6 4 2 Inlet Pressure = 1 (6.9 ) 2 4 6 8 1 12 14 16 SFM 1 8 6 4 2 1 2 4 5 6 7 IR FLOW RT Inlet Pressure = 1 (6.9 ) 28--FK dm /s 28-4-FK 2 4 6 8 1 12 14 16 18 SFM 1 8 6 4 2 1 2 4 5 6 7 8 dm /s IR FLOW RT Inlet Pressure = 1 (6.9 ) 28-6-FK 2 4 6 8 1 12 14 16 18 2 22 SFM 1 2 4 5 6 7 8 9 1 dm /s IR FLOW RT Plastic owl / owl Guard Without Gauge 5 to 125 (.4 to 8.6 ) Plastic owl / owl Guard Without Gauge to 6 (.2 to 4.1 ) Metal owl / Sight Gauge Without Gauge 1 to 25 (.7 to 17.2 ) /8 28--FKG 28--KG 28--GLG 28--FK 28--K 28--GL 1/2 28-4-FKG 28-4-KG 28-4-GLG 28-4-FK 28-4-K 28-4-GL /4 28-6-FKG 28-6-KG 28-6-GLG 28-6-FK 28-6-K 28-6-GL /8 28--FGG 28--GG 28--GHG 28--FG 28--G 28--GH 1/2 28-4-FGG 28-4-GG 28-4-GHG 28-4-FG 28-4-G 28-4-GH /4 28-6-FGG 28-6-GG 28-6-GHG 28-6-FG 28-6-G 28-6-GH Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. 219
atalog 9M-TK-19- asic 1" ody Filter / Regulator 9 Specifications Flow apacity* 25 SFM (118 dm /s) 25 SFM (118 dm /s) /4 1 djusting Range Pressure Gauge Port to 125 ( to 8.6 ) NPT Maximum Supply Pressure 25 (17.2 ) Operating Temperature Port Size 2 to 175 F ( to 8 ) NPT /4, 1 Standard Filtration 5 Micron Weight 5. lb. (2.4 kg) Type 5 micron elements: ll Wilkerson Type 5 micron elements meet or exceed ISO lass for maximum particle size and concentration of solid contaminants. 9-6-FL Materials of onstruction Features ody & owl 5 Micron Filtration luminum lement Retainer, eflector and affle alanced Valve esign Solid ontrol Piston for xtended Life /4" and 1" NPT Ports Port locks vailable for SPP Thread and 1-1/2" Port Plastic Filter lement Sintered Polyethylene Piston Plastic Seals Sight Gauge Polyamide (Nylon) Quick isconnect owl Springs Steel High Flow apacities Valve ssembly rass / (P)! WRNING PU K * Inlet pressure 1 (6.9 ). Secondary pressure 9 (6.2 ). Port blocks available for SPP thread & 1-1/2" port. S H T LO O " NPT Gauge Ports (2) Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. owl F Removal learance imensions Models Inches (mm) Standard Unit 9-XX-FL (P) F.62 (92) 5.91 15).62 (92) 6.8 (162) 9.57 (24) 15.95 (45) 4.92 (125) With Manual or Internal uto rain 22
atalog 9M-TK-19- Hi-Flow Modular Filter / Regulator 9 Replacement owl Kits Metal owl Sight Gauge / Internal uto rain... PNKS Sight Gauge / Manual rain...pnksm Replacement lement Kits 4 Micron... PNKSG 5 Micron... PNKS ctivated harcoal... PNKS SONRY PRSSUR 6 5 4 2 9 75 6 45 Inlet Pressure = 1 (6.9 ) 9-6-FL 1 15 Replacement Kits Service Kit... PNKRR Non-relieving... PNKRN Springs 1 to 6 Range... 114 2 to 125 Range... 118 5 to 25 Range...1117 1 2 4 5 SFM 5 1 15 2 25 dm /s IR FLOW RT 9-8-FL ccessories owl Latch Kit... 11 ontrol Knob...PNKPN rain Kit Internal uto rain...ps56 Manual rain... PS512 Gauges 6 ( to 4 )...K452N146 16 ( to 11 )... K452N1416 ( to 2 )...K452N14 Mounting racket Kit... PNKMW Sight Gauge Kit...PNKP SONRY PRSSUR 6 5 4 2 1 9 75 6 45 15 Inlet Pressure = 1 (6,9 ) 1 2 4 5 IR FLOW RT SFM 5 1 15 2 25 dm /s Ordering Information Model Type Manual rain Port Size Metal owl / Sight Gauge Without Gauge 2 to 125 (.4 to 8.6 ) Metal owl / Sight Gauge With Gauge 2 to 125 (.4 to 8.6 ) /4 9-6-FL 9-6-FLG 1 9-8-FL 9-8-FLG Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. 221
atalog 9M-TK-19- Notes 222