POLYSWITCH RESETTABLE DEVICES Surface-Mount Devices
|
|
- Melvyn Marsh
- 6 years ago
- Views:
Transcription
1 POLYSWITH RSTTL VIS PolySwitch surface-mount devices are an effective circuit protection method for computer, consumer, multimedia, portable and automotive electronics applications. In an affort to reduce the size and cost of surfacemount devices, Littelfuse PolySwitch team introduced the minism product series in Subsequently, we developed the microsm, nanosm, picosm and femtosm family of products. The femtosm series reduced the device size to a 1608mm (0603 mils) footprint, which is one-twelfth the size of the popular minism series. Recent additions to the PolySwitch surface-mount series include 1.1 picosm 1210mm (0805 mils) and 0.35 femtosm 1608mm (0603 mils) devices. NITS Smaller size helps save board space and cost Many product choices optimizes design flexibility ompatible with high-volume electronics assembly ssists in meeting regulatory requirements Higher voltage ratings allow use in new applications TURS RoHS compliant Halogen free (refers to: r 900ppm, l 900ppm, r+l 1500ppm) roadest range of resettable devices available in the industry urrent ratings from 0.05 to 3.1 Voltage ratings from 6V computer and electronic applications to 60V telecom applications gency recognition: UL, S, TÜV Small footprint ast time-to-trip Low resistance PPLITIONS omputer Portable electronics Multimedia Game machines Telephony and broadband Mobile phones utomotive Industrial controls attery RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 120
2 pplication Selection Table The table below lists PolySwitch surface-mount devices recommended for use in typical applications Specifications for the suggested PolySwitch surface-mount device part numbers can be found in this table Once a part has been selected, the user should evaluate and test each product for the intended application Protection pplication dditional omments PolySwitch Resettable evices - Key Selection riteria Overcurrent Overvoltage Small Size Low Resistance dapter Input Power Use w/ Zener & Triac SM250 SM250 SM200 ast Time-to-trip (Temperature Protection) attery Pack Protection nanosm150 minism260 minism200/16 harger Protection nanosm050 minism110/16 nanosm075 PU/I Protection nanosm110 nanosm150 nanosm075 ata cquisition/sensor microsm005 microsm005 Input/Output Power 6V nanosm075 nanosm150 nanosm050/ V minism075 minism110/16 minism075 nanosm075 nanosm110 nanosm050/13.2 evice ay System 12, 20 minism200 minism260 minism minism260 SM300 minism200 thernet/ln nanosm050/13.2 minism110/16 nanosm075 an microsm035 microsm050 microsm035 HMI picosm035s picosm035s picosm035s I 802.3af VoIP decasm050/60 decasm050/60 decasm050/60 I-1394 Power Provider SM/33 SM185 SM/33 lt. Power Provider SM185 SM185 SM150/33 Self-Powered SM185 SM185 SM150/33 L Inverter nanosm050/13.2 minism110/16 nanosm075 L Screen Power nanosm050/13.2 nanosm050/13.2 microsm035 LN (Low Noise lock) SM075 SM075 SM050 Motor 6V nanosm110 nanosm150 microsm V minism075 minism110/16 minism075 PS/2 Mouse/Keyboard nanosm075 nanosm110 nanosm050/13.2 Signal - ata ommunication 6V nanosm075 nanosm075 nanosm V minism050 minism075 minism020 30V SM SM075 SM050 SSI nanosm110 nanosm150 nanosm075 SIM/Smart ard Reader femtosm010 femtosm010 femtosm005 Telecom - Modem igital Line O minism014 minism014 minism014 Telecom - PX Subscriber O minism014 minism014 minism014 Temperature Sensor PU nanosm050/13.2 nanosm075 nanosm050/13.2 US Individual Port nanosm075 nanosm110 nanosm050/ Port Ganged nanosm150 minism150 minism125 3 Port Ganged minism200 minism200 minism200 Note: This list is not exhaustive. Littelfuse welcomes our customers input for additional application ideas for PolySwitch resettable devices. 121 Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
3 Table S1 Product Series: Size, urrent Rating, Voltage Rating/Maximum Resistance femtosm picosm nanosm microsm minism midsm Size mm (mils) (0603) (0805) (1206) (1210) (1812) (2018) Hold urrent () V /30.00Ω 30V /50Ω V /14.00Ω 0. 12V /8.00Ω 15V /11.00Ω 60V /15.00Ω 30V /15Ω 60V /12.70Ω V /5.80Ω 15V /9.00Ω 48V /6.50Ω V /6.00Ω V /4.20Ω 48V /5.00Ω V /3.00Ω 9V /3.20Ω 24V /3.10Ω 30V /3.30Ω V /2.10Ω V /1.75Ω 60V /2.30Ω V /1.00Ω 6V /1.40Ω 16V /1.35Ω 6V /1.30Ω V /0.80Ω 13.2V /0.75Ω 13.2V /0.90Ω 24V /1.00Ω V /0.35Ω* 6V /0.30Ω 6V /0.40Ω 13.2V /0.45Ω 24V /0.29Ω 33V /0.39Ω V /0.40Ω 1. 6V /0.17Ω* 6V /0.20Ω 6V /0.21Ω 8V /0.21Ω 16V /0.18Ω 24V /0.18Ω V /0.14Ω 16V /0.14Ω V /0.11Ω 6V /0.11Ω 6V /0.11Ω 15V /0.18Ω 12V /0.11Ω 16V /0.11Ω 24V /0.12Ω V /0.10Ω V /0.08Ω V /0.072Ω 6V /0.06Ω 8V /0.07Ω 6V /0.10Ω 16V /0.085Ω V /0.043Ω 12V /0.047Ω 13.2V /0.050Ω 16V /0.050Ω V /0.036Ω 3. RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 122
4 Table S1 Product Series: Size, urrent Rating, Voltage Rating/Maximum Resistance (ont d) SM SM SM2 decasm High Temperature SM Size mm , 3225 & 7555 (mils) (2920) (2920) (3425) (2018) (1206), (1210) & (2920) Hold urrent () V /10.0Ω 30V /11.0Ω V /4.80Ω 24V /1.95Ω V /1.40Ω 60V /1.10Ω 6V /0.90Ω V /1.00Ω 6V /0.36Ω 60V /1.00Ω V /0.48Ω 33V /0.41Ω V /0.34Ω V /0.25Ω 15V /0.25Ω 24V /0.24Ω V /0.23Ω 15V /0.25Ω 33V /0.23Ω V /0.15Ω V /0.15Ω 33V /0.165Ω V /0.125Ω 15V /0.125Ω V /0.085Ω 15V /0.85Ω V /0.075Ω V /0.072Ω 6V /0.048Ω 15V /0.05Ω 3. 18V /0.036Ω 123 Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
5 Table S2 Thermal erating [Hold urrent () at mbient Temperature ( )] Maximum mbient Temperature femtosm Series; Size 1608mm/0603mils femtosm femtosm femtosm femtosm femtosm femtosm femtosm picosm Series; Size 2012mm/0805mils picosm010s picosm012s picosm020s picosm035s picosm050s picosm075s picosm110s nanosm Series; Size 3216mm/1206mils nanosm nanosm nanosm nanosm nanosm nanosm nanosm050/ nanosm nanosm nanosm nanosm microsm Series; Size 3225mm/1210mils microsm microsm microsm microsm microsm microsm microsm microsm microsm minism Series; Size 4532mm/1812mils minism minism minism minism minism minism minism075/ RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 124
6 Table S2 Thermal erating [Hold urrent () at mbient Temperature ( )] (ont d) Maximum mbient Temperature minism Series; Size 4532mm/1812mils minism075/ minism minism minism110/ minism110/ minism minism125/ minism minism150/ minism150/ minism150/ minism minism minism200/ minism minism260/ minism260/ minism260/ minism midsm Series; Size 5050mm/2018mils SM decasm050/ SM SM SM SM Series; Size 7555mm/2920mils SM125/ SM185/ SM300/ SM310/ SM Series; Size 7555mm/2920mils SM SM SM SM075/ SM SM/ SMH SM SM150/ SM200/ SM250/ SM SM SM300/ Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
7 Table S2 Thermal erating [Hold urrent () at mbient Temperature ( )] (ont d) Maximum mbient Temperature SM2 Series; Size 8763mm/3425mils SM SM150/ SMH SM SM SM High Temperature SM Series; Size 3216mm/1206mils, 3225mm/1210mils & 7555mm/2920mils nanosmh nanosmh030/ nanosmh microsmh microsmh SMH125/ igure S1 Thermal erating urve = femtosm / picosm / nanosm / microsm / minism decasm / SM and SM igure S = SMH120 / SMH160 and High Temperature SM % of rated hold and trip current mbient Temperature ( ) RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 126
8 Table S3 lectrical haracteristics for at Room Temperature I H I T V MX I MX P MX Max Time-to-Trip R MIN R 1MX igure for imensions () () (V ) () (W) () (S) (Ω) (Ω) femtosm Series; Size 1608mm/0603mils femtosm S2 femtosm S2 femtosm S2 femtosm S2 femtosm S2 femtosm S2 femtosm S2 picosm Series; Size 2012mm/0805mils picosm010s S2 picosm012s S2 picosm020s S2 picosm035s S2 picosm050s S2 picosm075s S2 picosm110s S2 nanosm Series; Size 3216mm/1206mils nanosm S2 nanosm S2 nanosm S2 nanosm S2 nanosm S2 nanosm S2 nanosm050/ S2 nanosm S2 nanosm S2 nanosm S2 nanosm S2 microsm Series; Size 3225mm/1210mils microsm S2 microsm S2 microsm S2 microsm S2 microsm S2 microsm S2 microsm S2 microsm S2 microsm S2 minism Series; Size 4532mm/1812mils minism S2 minism S2 minism S2 minism S2 minism S2 minism S2 minism075/ S2 127 Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
9 Table S3 lectrical haracteristics for at Room Temperature (ont d) I H I T V MX I MX P MX Max Time-to-Trip R MIN R 1MX igure for imensions () () (V ) () (W) () (S) (Ω) (Ω) minism Series; Size 4532mm/1812mils minism075/ S2 minism S2 minism S2 minism110/ S2 minism110/ S2 minism S2 minism125/ S2 minism S2 minism150/ S2 minism150/ S2 minism150/ S2 minism S2 minism S2 minism200/ S2 minism S2 minism260/ S2 minism260/ S2 minism260/ S2 minism S2 midsm Series; Size 5050mm/2018mils SM S3 decasm050/ S2 SM S3 SM S3 SM S3 SM Series; Size 7555mm/2920mils SM125/ S2 SM185/ S2 SM300/ S2 SM310/ S2 SM Series; Size 7555mm/2920mils SM S4 SM S4 SM S4 SM075/ S4 SM S4 SM/ S4 SMH S4 SM S4 SM150/ S4 SM200/ S4 SM250/ S4 SM S4 SM S4 SM300/ S4 RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 128
10 Table S3 lectrical haracteristics for at Room Temperature (ont d) I H I T V MX I MX P MX Max Time-to-Trip R MIN R 1MX igure for imensions () () (V ) () (W) () (S) (Ω) (Ω) SM2 evices; Size 8763mm/3425mils SM S4 SM150/ S4 SMH S4 SM S4 SM S4 SM S4 High Temperature SM Series; Size 3216mm/1206mils, 3225mm/1210mils & 7555mm/2920mils nanosmh S2 nanosmh030/ S2 nanosmh S5 microsmh S2 microsmh S2 SMH125/ S2 igures S2-S5 imension igures igure S2 igure S3 igure S4 H G igure S5 Table S4 imensions in Millimeters (Inches) G H Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min femtosm Series; Size 1608mm/0603mils femtosm S2 (0.055) (0.071) (0.017) (0.033) (0.023) (0.039) (0.004) (0.020) (0.003) femtosm S2 (0.055) (0.071) (0.017) (0.033) (0.023) (0.039) (0.004) (0.020) (0.003) femtosm S2 (0.055) (0.071) (0.017) (0.033) (0.023) (0.039) (0.004) (0.020) (0.003) igure 129 Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
11 Table S4 imensions in Millimeters (Inches) (ont d) G H Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min femtosm Series; Size 1608mm/0603mils femtosm S2 (0.055) (0.071) (0.013) (0.030) (0.023) (0.039) (0.004) (0.020) (0.003) femtosm S2 (0.055) (0.071) (0.013) (0.030) (0.023) (0.039) (0.004) (0.020) (0.003) femtosm S2 (0.055) (0.071) (0.013) (0.030) (0.023) (0.039) (0.004) (0.020) (0.003) femtosm S2 (0.055) (0.071) (0.021) (0.037) (0.023) (0.039) (0.004) (0.020) (0.003) picosm Series; Size 2012mm/0805mils picosm010s S2 (0.079) (0.087) (0.023) (0.040) (0.051) (0.059) (0.010) (0.030) (0.003) picosm012s S2 (0.079) (0.087) (0.017) (0.027) (0.051) (0.059) (0.010) (0.030) (0.003) picosm020s S2 (0.079) (0.087) (0.017) (0.027) (0.051) (0.059) (0.010) (0.030) (0.003) picosm035s S2 (0.079) (0.087) (0.017) (0.027) (0.051) (0.059) (0.010) (0.030) (0.003) picosm050s S2 (0.079) (0.087) (0.025) (0.036) (0.051) (0.059) (0.010) (0.030) (0.003) picosm075s S2 (0.079) (0.087) (0.025) (0.036) (0.051) (0.059) (0.010) (0.030) (0.003) picosm110s S2 (0.079) (0.087) (0.031) (0.047) (0.051) (0.059) (0.010) (0.030) (0.003) nanosm Series; Size 3216mm/1206mils nanosm S2 (0.118) (0.134) (0.024) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.024) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.024) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.023) (0.032) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.023) (0.032) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.023) (0.032) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm050/ S2 (0.118) (0.134) (0.019) (0.029) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.017) (0.027) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.011) (0.026) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.022) (0.035) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.033) (0.043) (0.054) (0.071) (0.010) (0.030) (0.003) igure RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 130
12 Table S4 imensions in Millimeters (Inches) (ont d) G H Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min microsm Series; Size 3225mm/1210mils microsm S2 (0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.011) (0.019) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.020) (0.048) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.016) (0.030) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.031) (0.046) (0.092) (0.110) (0.010) (0.030) (0.003) minism Series; Size 4532mm/1812mils minism S2 (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) minism075/ S2 (0.172) (0.190) (0.032) (0.057) (0.121) (0.134) (0.010) (0.040) (0.008) minism075/ S2 (0.172) (0.190) (0.037) (0.057) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) minism110/ S2 (0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism110/ S2 (0.172) (0.190) (0.032) (0.057) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism125/ S2 (0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) igure 131 Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
13 Table S4 imensions in Millimeters (Inches) (ont d) G H Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min minism Series; Size 4532mm/1812mils minism150/ S2 (0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism150/ S2 (0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism150/ S2 (0.172) (0.190) (0.040) (0.077) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.020) (0.048) (0.121) (0.134) (0.010) (0.040) (0.008) minism200/ S2 (0.172) (0.186) (0.020) (0.048) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.019) (0.031) (0.121) (0.134) (0.010) (0.040) (0.008) minism260/ S2 (0.172) (0.190) (0.042) (0.060) (0.121) (0.134) (0.010) (0.040) (0.008) minism260/ S2 (0.172) (0.190) (0.042) (0.060) (0.121) (0.134) (0.010) (0.040) (0.008) minism260/ S2 (0.172) (0.190) (0.042) (0.060) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.018) (0.030) (0.121) (0.134) (0.010) (0.040) (0.008) midsm Series; Size 5050mm/2018mils SM S3 (0.186) (0.214) (0.070) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) decasm050/ S2 (0.185) (0.209) (0.025) (0.035) (0.165) (0.189) (0.010) (0.040) (0.010) SM S3 (0.186) (0.214) (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) SM S3 (0.186) (0.214) (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) SM S3 (0.186) (0.214) (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) SM Series; Size 7555mm/2920mils SM125/ S2 (0.287) (0.303) (0.018) (0.028) (0.193) (0.209) (0.010) (0.040) (0.008) SM185/ S2 (0.287) (0.303) (0.035) (0.047) (0.193) (0.209) (0.010) (0.040) (0.008) SM300/ S2 (0.287) (0.303) (0.031) (0.043) (0.193) (0.209) (0.010) (0.040) (0.008) SM310/ S2 (0.287) (0.303) (0.043) (0.067) (0.193) (0.209) (0.037) (0.057) (0.014) SM Series; Size 7555mm/2920mils SM S4 (0.265) (0.314) (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM S4 (0.265) (0.314) (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM S4 (0.265) (0.314) (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) igure RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 132
14 Table S4 imensions in Millimeters (Inches) (ont d) G H Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min SM Series; Size 7555mm/2920mils SM075/ S4 (0.265) (0.314) (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM S4 (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM/ S4 (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMH S4 (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM S4 (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM150/ S4 (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM200/ S4 (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM250/ S4 (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM S4 (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM S4 (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM300/ S4 (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM2 evices; Size 8763mm/3425mils SM S4 (0.315) (0.370) (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SM150/ S4 (0.315) (0.370) (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SMH S4 (0.315) (0.370) (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SM S4 (0.315) (0.370) (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SM S4 (0.315) (0.370) (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SM S4 (0.315) (0.370) (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) High Temperature SM Series; Size 3216mm/1206mils, 3225mm/1210mils & 7555mm/2920mils nanosmh S2 (0.118) (0.134) (0.012) (0.028) (0.054) (0.071) (0.010) (0.030) (0.003) nanosmh030/ S2 (0.118) (0.134) (0.033) (0.049) (0.055) (0.071) (0.010) (0.030) (0.003) nanosmh S5 (0.118) (0.134) (0.023) (0.039) (0.055) (0.071) (0.008) (0.032) microsmh S2 (0.118) (0.135) (0.022) (0.038) (0.092) (0.110) (0.010) (0.030) (0.003) microsmh S2 (0.118) (0.135) (0.009) (0.025) (0.092) (0.110) (0.010) (0.030) (0.003) SMH125/ S2 (0.287) (0.303) (0.035) (0.055) (0.193) (0.209) (0.037) (0.057) (0.014) igure 133 Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
15 igures S6-S15 Typical Time-to-Trip urves at 20 femtosmxxx = femtosm005 = femtosm008 = femtosm010 = femtosm012 = femtosm016 = femtosm020 G = femtosm035 igure S6 Time-to-Trip (s) G 0.01 G ault urrent () picosmxxxs = picosm010s = picosm012s = picosm020s = picosm035s = picosm050s = picosm075s G = picosm110s igure S7 Time-to-trip (s) G G ault urrent () nanosmxxx igure S8 = nanosm010 = nanosm012 = nanosm016 = nanosm020 = nanosm025 = nanosm035 G = nanosm050/13.2 H = nanosm075 I = nanosm110 J = nanosm150 K = nanosm200 Time-to-Trip (s) G H I J K H G I J K ault urrent () RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 134
16 igures S6-S15 Typical Time-to-Trip urves at 20 (ont d) microsmxxx igure S9 = microsm005 = microsm010 = microsm035 = microsm050 = microsm075 = microsm110 G = microsm150 H = microsm175 I = microsm200 Time-to-Trip (s) G H I I G 0.01 H ault urrent () minismxxx = minism010, minism014 = minism020 = minism030 = minism050 = minism075 = minism075/24 G = minism075/33 H = minism, minism110 I = minism110/16 J = minism110/24 K = minism125 L = minism125/16 M = minism150, minism150/12 N = minism150/16 O = minism150/24 P = minism160 Q = minism200 R = minism200/16 S = minism260 T = minism260/12,minism260/13.2 minism260/16 U = minism300 igure S10 10 G Q L I J M K O P S H N R T U Time-to-trip (s) T S Q U 0.01 G J K R O L H P I M N ault urrent () Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
17 igures S6-S15 Typical Time-to-Trip urves at 20 (ont d) midsm igure S11 = SM = decasm050/60 = SM-2018 = SM = SM Time-to-Trip (s) ault urrent () SMxxx igure S12 = SM125/33 = SM185/33 = SM300/24 = SM310/18 10 Time-to-Trip (s) ault urrent () SMxxx = SM030 = SM050 = SM075, SM075/60 = SM, SM/33 = SMH120 = SM150/ G = SM125 H = SM200/ I = SM250/ J = SM260 K = SM300, SM300/15 igure S13 Time-to-trip (s) 10 1 G H I K 0.1 J G 0.01 H ault urrent () K J I RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 136
18 igures S6-S15 Typical Time-to-Trip urves at 20 (ont d) SM2xxx igure S14 = SM150, SM150/33 = SMH160 = SM185 = SM200 = SM Time-to-Trip (s) ault urrent () High Temperature SM igure S15 = nanosmh010 = microsmh010 = nanosmh030/24 = microsmh050 = nanosmh075 = SMH125/24 Time-to-Trip (s) ault urrent () 137 Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
19 Table S5 Physical haracteristics and nvironmental Specifications Operating temperature range -40 to 85, -40 to 125 for SMH120, SMH160 and High Temperature SM Physical haracteristics Terminal Pad Material % Matte Tin with Nickel Underplate Soldering haracteristics NSI/J-ST-002 ategory 3 for femtosm, picosm, nanosm, microsm, minism and SM Series NSI/J-ST-002 ategory 1 for SM Series Solder Heat Withstand per I-ST , Test Tb, Section 5, Method 1 lammability Resistance per I Needle lame Test for 20 seconds Recommended Storage 40 max, 70% R.H. max; evices May Not Meet Specified Ratings if Storage onditions re xceeded onditions nvironmental Specifications Test Test Method onditions Resistance hange Storage Life PS300, Section , 0 hrs ±3% typ 85, 0 hrs ±5% typ Humidity ging PS300, Section , 85% RH, hrs ±1.2% typ Thermal Shock MIL-ST-202, Method 107G 85, -40 (20 Times) -33% typ 125, -55 (10 Times) -33% typ Vibration MIL-ST-883 per MIL-ST-883 No hange Solvent Resistance PS300, Section reon No hange Trichloroethane Hydrocarbons No hange No hange Table S6 Packaging and Marking Information Tape and Reel Quantity Standard Package Marking Recommended Pad Layout igures [mm (in)] imension (Nom) imension (Nom) imension (Nom) gency Recognition femtosm Series; Size 1608mm/0603mils femtosm005 4,000 20, (0.032) 0.60 (0.024) 0.80 (0.032) UL, S femtosm008 4,000 20,000 T 0.80 (0.032) 0.60 (0.024) 0.80 (0.032) UL, S femtosm010 4,000 20, (0.032) 0.60 (0.024) 0.80 (0.032) UL, S, TÜV femtosm012 5,000 25, (0.032) 0.60 (0.024) 0.80 (0.032) UL, S femtosm016 5,000 25, (0.032) 0.60 (0.024) 0.80 (0.032) UL, S femtosm020 5,000 25, (0.032) 0.60 (0.024) 0.80 (0.032) UL, S, TÜV femtosm035 4,000 20,000 K 0.80 (0.032) 0.60 (0.024) 0.80 (0.032) UL, S picosm Series; Size 2012mm/0805mils picosm010s 3,000 15, (0.060) 1.00 (0.039) 1.20 (0.047) UL, S, TÜV picosm012s 4,000 20, (0.060) 1.00 (0.039) 1.20 (0.047) UL, S, TÜV picosm020s 4,000 20,000 H 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) UL, S, TÜV picosm035s 4,000 20,000 I 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) UL, S, TÜV picosm050s 3,000 15,000 K 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) UL, S, TÜV picosm075s 3,000 15,000 M 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) UL, S, TÜV picosm110s 3,000 15,000 S 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) UL, TÜV nanosm Series; Size 3216mm/1206mils nanosm010 3,000 15, (0.063) 1.00 (0.039) 2.00 (0.079) UL, TÜV nanosm012 3,000 15,000 P 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm016 3,000 15,000 N 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 138
20 Table S6 Packaging and Marking Information (ont d) Tape and Reel Quantity Standard Package Marking Recommended Pad Layout igures [mm (in)] imension (Nom) imension (Nom) imension (Nom) gency Recognition nanosm Series; Size 3216mm/1206mils nanosm020 3,000 15, (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm025 3,000 15, (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm035 3,000 15, (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm050/13.2 3,000 15,000 M 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm075 3,000 15,000 L 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm110 3,000 15,000 K 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm150 3,000 15, (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm200 3,000 15,000 T 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm Series; Size 3225mm/1210mils microsm005 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm010 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm035 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm050 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm075 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm110 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm150 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm175 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm200 3,000 15, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV minism Series; Size 4532mm/1812mils minism010 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism014 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism020 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism030 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism050 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism075 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism075/24 1,500 7, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism075/33 1,500 7, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism110 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism110/16 2,000 10, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism110/24 1,500 7, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism125 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism125/16 2,000 10, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism150 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism150/12 2,000 10, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism150/16 2,000 10, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism150/24 1,000 5, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism160 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism200 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism200/16 2,000 10, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, TÜV minism260 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism260/12 1,500 7, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism260/13.2 1,500 7, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism260/16 1,500 7, V 3.15 (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism300 2,000 10, (0.124) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV 139 Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
21 Table S6 Packaging and Marking Information (ont d) Tape and Reel Quantity Standard Package Marking Recommended Pad Layout igures [mm (in)] imension (Nom) imension (Nom) imension (Nom) gency Recognition midsm Series; Size 5050mm/2018mils SM ,000 20, (0.18) 1.50 (0.059) 3.40 (0.134) UL, S, TÜV decasm050/60 1,000 5, V 4.32 (0.17) 1.40 (0.055) 3.61 (0.142) UL, S, TÜV SM ,000 20, (0.18) 1.50 (0.059) 3.40 (0.134) UL, S, TÜV SM ,000 20, (0.18) 1.50 (0.059) 3.40 (0.134) UL, S, TÜV SM ,000 20, (0.18) 1.50 (0.059) 3.40 (0.134) UL, S, TÜV SM Series; Size 7555mm/2920mils SM125/33 4,000 20, (0.209) 2.00 (0.079) 4.60 (0.18) UL SM185/33 4,000 20, V 5.30 (0.209) 2.00 (0.079) 4.60 (0.18) UL, S, TÜV SM300/24 4,000 20, V 5.30 (0.209) 2.00 (0.079) 4.60 (0.18) UL, S, TÜV SM310/18 3,000 15, V 5.30 (0.209) 2.00 (0.079) 4.60 (0.18) UL, S, TUV SM Series; Size 7555mm/2920mils SM030 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM050 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM075 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM075/60 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM/33 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SMH120 2,000 10,000 H (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM125 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM150/ ,000 10,000 S (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM200/ ,000 10,000 S (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM250/ ,000 10,000 S (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM260 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM300 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM300/15 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM2 evices; Size 8763mm/3425mils SM150 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV SM150/33 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV SMH160 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV SM185 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV SM200 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV SM250 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV High Temperature SM Series; Size 3216mm/1206mils & 3225mm/1210mils & 7555mm/2920mils nanosmh010 4,000 20,000 H (0.063) 1.00 (0.039) 2.00 (0.079) nanosmh030/24 3,000 15,000 H (0.063) 1.00 (0.039) 2.00 (0.079) UL nanosmh075 3,000 15,000 H (0.063) 1.00 (0.039) 2.00 (0.079) microsmh010 3,000 15,000 H (0.098) 1.00 (0.039) 2.00 (0.079) microsmh050 4,000 20,000 H (0.098) 1.00 (0.039) 2.00 (0.079) SMH125/24 3,000 15,000 H125 24V 5.30 (0.209) 2.00 (0.079) 4.60 (0.181) UL RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 140
22 igure S16 Recommended Pad Layout gency Recognition UL ile # for all Surface-mount evices S ile # for all Surface-mount evices TÜV ertificate vailable Upon Request (ertified to I ) Solder Reflow and Rework Recommendation lassification Reflow Profiles Profile eature Pb-ree ssembly verage Ramp-up Rate (Ts MX to Tp) 3 /s max Preheat Temperature min (Ts MIN ) 150 igure S17 Tp Ramp Up tp ritical Zone T L to Tp Temperature max (Ts MX ) 200 T L Ts MX t L Time (ts MIN to ts MX ) s Time Maintained bove: Temperature (T L ) 217 Time (t L ) s Temperature Ts MIN ts Preheat Ramp own Peak/lassification Temperature (Tp) 260 Time within 5 of ctual Peak Temperature Time (tp) 30s max 25 Reflow Profile t 25 to Peak Time Ramp-down Rate 3 /s max Time 25 to Peak Temperature 8 mins max Note: ll temperatures refer to topside of the package, measured on the package body surface. Solder Reflow Recommended reflow methods: - IR - Hot air - Nitrogen Recommended maximum paste thickness: 0.25mm (0.010in) evices can be cleaned using standard methods and aqueous solvents. xperience has shown the optimum conditions for forming acceptable solder fillets occur when a reasonable amount of solder paste is placed underneath each device s termination. s such, we request that customers comply with our recommended solder pad layouts. ustomer should validate that the solder paste amount and reflow recommendations meet its application. We request that customer board layouts refrain from placing raised features (e.g. vias, nomenclature, traces, etc.) underneath PolySwitch devices. It is possible that raised features could negatively impact solderability performance of our devices. Rework femtosm, picosm, nanosm, microsm, minism and SM series: standard industry practices. (Please also avoid direct contact to the device.) SM series: Rework should be confined to removal of the installed product and replacement with a fresh device. 141 Specifications subject to change without notice Littelfuse, Inc. RoHS ompliant, LV ompliant
23 Table S7 Tape and Reel Specifications (Millimeters) escription femtosm I picosm I nanosm nanosmh010 nanosmh030/24 and nanosmh075 I microsm microsmh010 and microsmh050 I minism and decasm050/60 I W 8.0 ± ± ± ± ± 0.30 P ± ± ± ± ± 0.10 P ± ± ± ± ± 0.10 P ± ± ± ± ± ± ± ± ± 0.10 Table S ± ± 0.10 Table S8 Table S8 Table S8 1 max ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± min T max T 1 max K 0 Table S8 Table S8 Table S8 Table S8 Table S8 escription midsm except decasm050/60 I SM and SMH125/24 I SM I SM2 I W 16.0 ± ± ± ± 0.30 P ± ± ± ± 0.10 P ± ± ± ± 0.10 P ± ± ± ± ± 0.15 Table S8 5.6 ± ± ± 0.23 Table S8 8.1 ± ± max / / / / ± ± ± ± ± ± ± ± min T max T 1 max K ± 0.15 Table S8 3.2 ± ± 0.15 RoHS ompliant, LV ompliant Specifications subject to change without notice Littelfuse, Inc. 142
PolySwitch Resettable Devices Surface-mount Devices
PolySwitch Resettable evices Surface-mount evices PolySwitch surface-mount devices are the preferred circuit protection method for computer, consumer, multimedia, portable, and automotive electronics applications.
More informationPolySwitch Resettable Devices Surface-mount Devices
Originally introduced more than 15 years ago, Poly- Switch surface-mount devices are now the preferred circuit protection method for computer, consumer, multimedia, portable, and automotive electronics
More informationPolySwitch Resettable Devices
PolySwitch Resettable evices Strap attery evices Raychem ircuit Protection, pioneer of polymeric PT resettable devices, has developed several material platforms specifically tailored to help protect battery
More informationRadial Leaded > RGEF Series. Description. Features. Applications
PolySwitch Resettable PPTs RG Series RoHS escription ittelfuse PolySwitch radial-leaded devices represent the most comprehensive and complete set of PPT products available in the industry today. RG series
More informationPolySwitch Radial-leaded Resettable Devices
PolySwitch Radial-leaded Resettable Devices Radial-leaded Raychem Circuit Protection has pioneered PPTC technology for over twenty years. Our radialleaded products represent the widest range of product
More informationSurface Mount NTC Thermistors. Link: RT Tables. NST Series
FEATURES NEGATIVE TEMPERATURE COEFFICIENT FAST RESPONSE TO TEMPERATURE VARIATIONS MAKE THEM IDEALLY FOR TEMPERATURE SENSORS AND COMPENSATORS RoHS STANDARD EIA 0201, 0402, 0603 AND 0805 SIZES Compliant
More informationPOLYFUSE PTC SELECTION GUIDE
POLYFUS PTC SLCTION GUID Surface Mount attery Strap Radial Leaded High Voltage Radial Leaded PTC Characteristics and Terminology polymeric PTC (positive temperature coefficient) overcurrent protector is
More information15KPA-HRA Series. TVS Diodes Axial Leaded 15 kw > 15KPA-HRA series. Descritions
5KPA-HRA Series RoHS Pb e3 Descritions Uni-directional The 5KPA-HRA High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationNON-CATALOG. Features excellent image rejection, 27 db typ. low conversion loss, 7.0 db typ. aqueous washable J-leads for strain relief
NON-CATAG Surface Mount Image Reject Mixer Level 13 ( Power +13dBm) 2490 to 2550 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 200mW IF Current 40mA
More informationTVS Diodes Axial Leaded 30 kw > 30KPA-HRA series. Features. 30 kw 8.0 W 400 A. -55 to 175 C. Notes: 8.0 C/W
3KPA-HRA Series RoHS Pb e3 Descriptions AGENCY Uni-directional Agency Approvals Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More information5KP-HR Series. TVS Diodes Axial Leaded 5 kw > 5KP-HR series. Description. Uni-directional
5KP-HR Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E2353 Bi-directional Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol
More informationBOURNS INDUCTIVE COMPONENTS
Ⅰ. Configuration and dimensions: REF. : REV. G ( 20150507 ) PGE 1 Marking ot is the Inductance code reading marking F E C ( PC Pattern ) Unit:m/m 7.50 ±0.3 5.00 ±0.3 C 2.60 ref. 8.00 ref. E 7.80 ref. F
More informationSurface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors
FEATURES NEW X, Y, "Z", "U" & "V" TYPE HIGH RIPPLE CURRENT/VERY LOW ESR REPLACES MULTIPLE TANTALUM CHIPS IN HIGH CURRENT POWER SUPPLIES AND VOLTAGE REGULATORS FITS EIA (7343) D AND E TANTALUM CHIP LAND
More informationProduct Specification Spring Finger
Product Specification 108-115008-3 Spring Finger Restricted to Sony Ericsson Mobile Communications 1. SCOPE 1.1. Content This specification covers the requirements for product performance test methods
More informationEALP05RDBRA0 LAMP. Features. Description. Applications. Choice of various viewing angles. Available on tape and reel. Reliable and robust
Features Choice of various viewing angles Available on tape and reel. Reliable and robust The product itself will remain within RoHS compliant version. Compliance with EU REACH Compliance Halogen free.
More information1224SUBC/C470/S400-A4
Features Choice of various viewing angles Available on tape and reel. Reliable and robust The product itself will remain within RoHS compliant version. Compliance with EU REACH Compliance Halogen Free.(Br
More informationLAMP SUGC/S400-A5
Features Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Compliance with EU REACH Compliance Halogen
More informationRIGHT ANGLE BOTTOM ENTRY TOP ENTRY 1 OF * KK 156 HOUSING PCB SERIES PRODUCT CUSTOMER DRAWING MM/IN NTS SAMIEC 1987/01/ SEE CHART
9 8 7 6 5 4 3 2 1 RIGHT ANGLE E E D BOTTOM ENTRY +0.97-0.00 +.038 -.000 (7.9).31 REF (1.91).075 OPTIONAL VOIDED CIRCUIT SEE CHART FOR LOCATION D C B A TOP ENTRY (1.47)REF..058 RELEASE STATUS FORMAT: Eng-lega-master-tb-prod-B
More informationPRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold plated connector series, single and dual row versions in wire to wire and wire to printed circuit
More informationHigh Frequency Chip Ceramic Inductor
Feature 1.Particular ceramic material and coil structure provide high frequency application range up to 10GHz 2.High Q at high frequency 3.Small size and low profile 4.Available in various sizes 5.Excellent
More informationGeneral Specifications
Series F Illuminated Ultra-Thin Process Sealed Tactiles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles General Specifications
More informationBZD27C3V6P to BZD27C200P
Zener Diodes with Surge Current Specification Features Sillicon planar zener diodes Low profile surface-mount package Zener and surge current specification Low leakage current Excellent stability High
More information204-10SDRD/S530-A3 LAMP. Features. Description. Applications. Revision 1. LifecyclePhase: Expired Period: Forever. Choice of various viewing angles
Features Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Description The series is specially designed
More informationHigh Curent Inductor / MPSZ Type
.Features: 1. Shielded construction. 2. Frequency range up to 1.0 MHz. 3. Lowest DCR / μh, in this package size..applications: 1. Handles high transient current spikes without saturation. 2. Ultra low
More informationPSR-4000 HFX Series (UL Name: PSR-4000DE / CA-40HF)
PSR-4000 HFX Series (UL Name: PSR-4000DE / CA-40HF) LIQUID PHOTOIMAGEABLE SOLDER MASK Application by Screen Printing Dark Green Satin Available in DI version Halogen-Free RoHS Compliant Compatible with
More informationKAL36150 Molded Case Circuit Breaker, 600VAC, 150A
Product ata Sheet KL3 Molded ase ircuit reaker, 00V, List $1,733.00 US vailability Stock Item: This item is normally stocked in our distribution facility. Technical haracteristics pprovals UL Listed -
More information333-2SURC/H3/S530-A4 LAMP. Features. Description. Applications. 1 Ver.:2 Release Date:12/13/2016 狀態 :Approved( 正式發行 )
Features Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Description The series is specially designed
More information1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles oded Switches Features/Benefits PB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS ompliant Typical Applications
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles oded Switches Features/Benefits PB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS ompliant Typical Applications
More informationLAMP 336SURSYGWS530-A3
Features Two chips are matched for uniform light output, wide viewing angle Long life-solid state reliability I.C. compatible/low power consumption The product itself will remain within RoHS compliant
More informationRF Chip Inductors. Wire-Wound , 0603, 0805, 1008, Pulse Electronics - leading supplier of magnetics for consumer applications
RF Chip Inductors Wire-Wound - 0402, 0603, 0805, 1008, 1206 Pulse Electronics - leading supplier of magnetics for consumer applications Table of Contents The 0402 to 1206 series range of Miniature Chip
More informationBasic Board Mount Pressure Sensors. Datasheet
Basic Board Mount Pressure Sensors TBP Series, Compensated/Unamplified 60 mbar 0 bar 6 kpa MPa psi 50 psi Millivolt Analog Output Datasheet Basic Board Mount Pressure Sensors Honeywell s Basic Board Mount
More informationThermal Profiling the Reflow Process
Thermal Profiling the Reflow Process The Nomadics TCProfile system is a cost-effective instrument to measure the temperature characteristics of any process where the thermal profile is important to the
More information1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
More informationMS54XX Miniature SMD Pressure Sensor
SPECIFICATIONS 1, 7, 12, and 70 bar absolute pressure range Uncompensated Piezoresistive silicon micromachined sensor Miniature surface mount Ceramic carrier Low noise, high sensitivity, high linearity
More informationE28/Q28 Safety Exhaust Valve Externally Monitored
E8/Q8 Safety Exhaust Valve Externally Monitored ulletin 9EM4 the total systems approach to air preparation Features Externally Monitored Safety Exhaust Valve Function When applications demand a safe environment
More informationLAMP 339-9SUGSURSUBC/S1174
Features High efficiency. Selected minimum intensities. Available on tape and reel. The product itself will remain within RoHS compliant version Compliance with EU REACH Compliance Halogen free. (Br
More information广东锐陆光电科技有限公司 GUANG DONG ELITE PHOTOELECTRIC TECHNOLOGY CO.,LTD. Product Specification
Product Specification MODEL : 5050A Product Description : EMC5050 5W 36V Address:Guanhuang North road Hu anwei Gaobu Town Tel: 0769-89080660 Fax: 0769-89080658 Page 1 of 8 Feature Viewing angle:120 deg
More informationFeatures hermetic shielded case very small phase variation
Plug-In Limiter 50Ω Broadband, 0.1 to 150 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Input Power 100mW Control Current 10mA Permanent damage may occur
More informationSMPS Stacked MLC Capacitors
(SM Style) Technical Information on SMPS apacitors LTRIAL SPIFIATIONS Temperature oefficient 0G: A Temperature oefficient - 0 ±30 ppm/, -55 to +125 X7R: Temperature oefficient - ±15%, -55 to +125 Z5U:
More informationPSR-9000 FXT Series (UL Name: PSR-9000AC/CA-90AC)
PSR-9000 FXT Series (UL Name: PSR-9000AC/CA-90AC) LIQUID PHOTOIMAGEABLE SOLDER MASK Designed for Flexible Printed Circuit Boards Screen Print Application Halogen-Free Compatible with Lead-Free Processing
More information5mm Infrared LED EAILP05RDDB1
Features High reliability High radiant intensity Peak wavelength λp=940nm 2.54mm Lead spacing Low forward voltage Pb Free This product itself will remain within RoHS compliant version. Description Everlight
More informationP33 Safety Exhaust Valve Externally Monitored. Bulletin 0700-B14 ENGINEERING YOUR SUCCESS.
P Externally Monitored ulletin 07004 ENGINEERING YOUR SUESS. Features Externally Monitored Function When applications demand a safe environment you can count on safety valves from Parker Hannifin. The
More informationTechnical Data Sheet 339-9SUGSURSUBC/S1182. Features. Descriptions. Applications. Device Selection Guide
Features Popular T-1 3/4 round package. Common anode. Built in red, green, and blue chips. Selected minimum intensities. Available on tape and reel. The product itself will remain within RoHS compliant
More informationGlenair Well-Master TM 260 Micro-D Withstands Extreme High Temperature
Section : Well-Master Micro- + P eader lenair Well-Master TM Micro- Withstands Extreme igh Temperature Standard Micro- connectors are rated for +125. lenair's MWM Micro- can withstand +150 continuous operating
More information5mm Infrared LED,T-1 HIR323C
,T-1 Features High reliability High radiant intensity Peak wavelength λp=850nm 2.54mm Lead spacing Low forward voltage Pb Free This product itself will remain within RoHS compliant version. Compliance
More informationREFERENCE SPECIFICATION
1 / 8 1. Notification Items 1.1 Law and the regulation which are applied 1 Ozone depleting substances specified by Montreal Protocol have not been used in the manufacturing process of the material used
More informationSPECIFICATION FOR APPROVAL
CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! SPECIFICATION FOR APPROVAL QUANTITY Pcs. DATE 2010/11/01 ITEM NLC322522T-100K-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER
More informationibridge and ibridge Ultra
2.00 mm Board to Cable Connectors ED. 06 10.2016 Catalog EA IB001 erni.com erni.cn TABLE OF CONTENTS OVERVIEW General 03 Technical Details 04 Features 05 Electrical and Mechanical Characteristics 10 Ordering
More informationTin Whisker Testing UMT 250
Report Tin Whisker Testing UMT 250 INHALTSVERZEICHNIS 1 INTRODUCTION... 2 2 INEMI TIN WHISKER USER GROUP TEST PROCEDURE... 2 3 INEMI TESTING... 3 4 ACCEPTANCE CRITERIA... 3 5 IMAGES... 4 6 CONCLUSION...
More informationZener Diodes with Surge Current Specification
Zener Diodes with Surge Current Specification DESIGN SUPPORT TOOLS Models Available 949588 click logo to get started FEATURES Glass passivated junction Hermetically sealed package Clamping time in picoseconds
More informationDESCRIPTION FEATURES
DESCRIPTION The TruStability Standard Accuracy Silicon Ceramic (SSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog output for reading pressure over the specified full
More informationPSR-4000BN DI Colors (UL Name: PSR-4000BN / CA-40 BN)
PSR-4000BN DI Colors (UL Name: PSR-4000BN / CA-40 BN) LIQUID PHOTOIMAGEABLE SOLDER MASK Screen or Spray Application Designed for the latest DI Technology Available in Black, Blue, White, Clear, Red, Yellow,
More informationCeramic Disc Capacitors Safety Standard Approved Disc Capacitor
EATURES omplying with EN 132 400 and IE 60384-14, 2nd edition, including amendment 1.1995 High reliability Vertical (inline) kinked or straight leads. APPLIATIONS Across-the-line Line by-pass Antenna coupling.
More informationSeries variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )
Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm
More informationReflow Oven HHL3000 INSTRUCTION MANUAL POHUA - jedyny autoryzowany przedstawiciel w Polsce
POHUA - jedyny autoryzowany przedstawiciel w Polsce www.pohua.pl AOYUE TONGYI ELECTRONIC EQUIPMENT FACTORY Jishui Industrial Zone, Nantou, Zhongshan City, Guangdong Province, P. R. China www.aoyue.com
More informationThin-Film Technology. Accu-F / Accu-P Thin-Film RF/Microwave Capacitors.
Thin-Film Technology Accu-F / Accu-P Thin-Film RF/Microwave Capacitors 5 Accu-F / Accu-P Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low
More informationSPECIFICATION FOR APPROVAL THE PIEZOELECTRIC SOUNDER
Customer:Freewind Ver. No. X-1102-712E(00) Date issued 16-May-14 SPECIFICATION FOR APPROVAL THE PIEZOELECTRIC SOUNDER YOUR CONFIRMATION TYPE :PS1440P02E Date Remark: Please contact us with any question
More informationCPTCONNECTOR. Board-to-wire. Features. Specifications
CPTCONNECTOR Board-to-wire HIT AIT AIT- HCM SHC HCH MIO CPT BMD RAD CIT GIT0P GITP HIC SNA NAC- SQS SQM SQH SQS Developed in pursuit of miniaturization and low profile as PC board connector for automobile.
More informationSPECIFICATIONS FOR APPROVAL
CUSTOMER :. DATE :. REV : REV. 0.0. preliminary SPECIFICATIONS FOR APPROVAL 6060 70mW 1in1 UVC LED PKG (@ If =350mA) MODEL NAME : LEUVA66H70HF00 RoHS Compliant APPROVAL REMARK APPENDIX DESIGNED CHECKED
More informationXSL-360-5E. UV LED 5 mm TECHNICAL DATA. Absolute Maximum Ratings (T a =25 C) Specifications (If=20mA, T a =25 C) Drawing
XSL-360-5E TECHNICAL DATA UV LED 5 mm Drawing Absolute Maximum Ratings (T a =25 C) Item Symbol Value Unit DC Forward Current I F 25 ma Peak Pulse Forward Current * 1 I FP 100 ma Power Dissipation P D 100
More informationSpecification for Approval
Specification for Approval ( Version 1.0 ) Part No. : LBH1035 comments LUXPIA Co., Ltd. Designed by Checked by Approved by Approved by Approved by Approved by / / / / / / Date :... Date :... LUXPIA CO.,LTD.
More information5mm Infrared LED HIR7373B/L289
5mm Infrared LED Features High reliability High radiant intensity Peak wavelength λp=850nm 2.54mm Lead spacing Low forward voltage Pb Free This product itself will remain within RoHS compliant version.
More informationSpecification for Approval
Specification for Approval (Tentative 2.0) Part No : LWH1056N comments LUXPIA Co., Ltd. Designed by Checked by Approved by Approved by Approved by Approved by / / / / / / Date :... Date :... #408 720 Bathurst
More informationPSR-4000 LDI (US) (UL Name: PSR-4000 JA / CA-40 JA)
PSR-4000 LDI (US) (UL Name: PSR-4000 JA / CA-40 JA) LASER DIRECT IMAGING SOLDER MASK For LDI Exposing Available in Green, Blue, Black, Clear and Red Satin Finish Halogen-Free RoHS Compliant Compatible
More informationCONTENTS TABLE OF MAIDA S HISTORY TERMINOLOGY & GENERAL SPECIFICATIONS. iii. LEAD CODES and TAPE & REEL STANDARD SERIES 1 HC SERIES 17
TABLE OF CONTENTS MAIDA S HISTORY TERMINOLOGY & GENERAL LEAD CODES and TAPE & REEL i ii iii STANDARD SERIES 1 HC SERIES 17 LOW PROFILE SERIES 33 THERMALLY PROTECTED SERIES 39 HIGH ENERGY SERIES LEAD CODES
More informationSpecification for Approval
Specification for Approval ( Tentative 2.0) Part No. : LWX1057N6 comments LUXPIA Co., Ltd. Designed by Checked by Approved by Approved by Approved by Approved by / / / / / / Date :... Date :... #408 720
More informationMS52XX-C&T SMD Pressure Sensor
1, 4, and 7 bar absolute pressure range Piezoresistive silicon micromachined sensor Surface mount 6.2 x 6.4 mm LCP plastic cap for easy connection Uncompensated Optional trimmed offset Low noise, high
More informationSmall Form-factor Pluggable Connector
Small Form-factor Pluggable Connector OUTLINE SPT series is a connector and cage which is compatible to Small Form-factor Pluggable(SFP/ SFP+) specification of Multi-Source greement(ms) for optical transceivers.
More informationTypical Performance 1. LTE 20M ACLR dbm. 2 OIP3 _ measured on two tones with a output power 5dBm/ tone, F2 F1 = 1 MHz.
Device Features Gain = 15.6 db @ 2140MHz OIP3 = 35.0 dbm @ 2140 MHz Output P1 db = 23.2 dbm @ 2140 MHz N.F = 2.9dB @ 2140 MHz Internally matched to 50 ohms Lead-free/RoHS-compliant SOT-89 SMT package Product
More informationMonolithic Amplifier CMA-81+ Wideband, High Dynamic Range, Ceramic. DC to 6 GHz. The Big Deal
Wideband, High Dynamic Range, Ceramic Monolithic Amplifier 50Ω DC to 6 GHz The Big Deal Ceramic, hermetically sealed, nitrogen filled Low profile case, 0.045 High IP3, +38 dbm High POUT, +19.5 dbm CASE
More informationPlok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
More informationInductive Proximity Sensors Global Plus Prox
July 2005 PG.05..T. -35 Global Plus ontents Overview................... -35 Model Selection, Sensors...... - Model Selection, ompatible onnector ables........... -37 Model Selection, ccessories... -37
More informationPreliminary Datasheet
Device Features Low Noise Figure: NF = 0.95 @ 1900MHz High Linearity: OIP3 = 36 dbm @ 1900 MHz Output P1 db = 22 dbm @ 1900 MHz Gain = 17 db @ 1900 MHz Internally matched to 50 ohms Vdd: 5.0V Lead-free/RoHS-compliant
More informationSESI SMD Power Inductors and Transformers
39 SESI SMD Power Inductors and Transformers Microspire upgraded aircoil grid transfer + transfer moulding technology by using PLNR ferrites ; which lead to the SESI product range (SMD Energy Storage Inductors).
More informationPSR-4000 MP (UL Name: PSR-4000MP / CA-40MP)
PSR-4000 MP (UL Name: PSR-4000MP / CA-40MP) LIQUID PHOTOIMAGEABLE SOLDER MASK Screen or Spray Application Dark Green, Matte Finish RoHS Compliant Excellent Solder Ball Resistance Compatible with Lead-Free
More informationHMU Series Basic pressure sensors
FEATURES mbar to 0 bar, to 50 absolute, gage or differential pressure Increased media compatibility Wide operating temperature range SIL and DIP housings RoHS compliant Quality Management System according
More informationMS54XX Miniature SMD Pressure Sensor
1, 7, 12, and 70 bar absolute pressure range Uncompensated Piezoresistive silicon micromachined sensor Miniature surface mount Ceramic carrier Low noise, high sensitivity, high linearity DESCRIPTION The
More informationSpecification for Approval
Specification for Approval ( Version 1.0 ) Part No. : LWH1036N comments LUXPIA Co., Ltd. Designed by Checked by Approved by Approved by Approved by Approved by / / / / / / Date :... Date :... LUXPIA CO.,LTD.
More informationPSR-4000BN Series (UL Name: PSR-4000BN / CA-40 BN)
PSR-4000BN Series (UL Name: PSR-4000BN / CA-40 BN) LIQUID PHOTOIMAGEABLE SOLDER MASK Screen or Spray Application Available in Green or Dark Green Semi- Gloss Finish RoHS Compliant High Viscosity version
More informationSeries AM3T-VZ 3 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Series AM3T-VZ FEATURES: Wide 2:1 Range 24 Pin DIP Package High up to 82% Metal Package Operating Temperature -4 o C to +85 o C / Isolation 15 or 35
More informationMULTILAYER CERAMIC CHIP CAPACITORS
August 2016 C Series Commercial Grade High Voltage (1000V and over) Type: C3225 [EIA CC1210] C4520 [EIA CC1808] C4532 [EIA CC1812] C5750 [EIA CC2220] (1/1) REMINDERS Please read before using this product
More informationMS54XX Miniature SMD Pressure Sensor
1, 7, 12, and 70 bar absolute pressure range Uncompensated Piezoresistive silicon micromachined sensor Miniature surface mount Ceramic or PCB carrier Low noise, high sensitivity, high linearity RoHScompatible
More informationDRS25 PROCESS DEVELOPMENT GUIDE.
DRS25 PROCESS DEVELOPMENT GUIDE www.air-vac-eng.com Table Of Contents 6 Process Development Guide...3 6.0 Overview...4 6.1 Physical Setup...4 6.2 Profile Tutor...6 6.3 Thermal Profile Analysis...18 6.4
More information3mm Infrared LED,T-1 HIR204C
,T-1 Features High reliability High radiant intensity Peak wavelength λp=850nm 2.54mm Lead spacing Low forward voltage Pb Free This product itself will remain within RoHS compliant version. Description
More informationSpecification for Approval
Specification for Approval ( Version 1.2 ) Part No. : LWH1025N LWH1026N LWH1028N LWH1029N comments LUXPIA Co., Ltd. Designed by Checked by Approved by Approved by Approved by Approved by / / / / / / Date
More informationTruStability Board Mount Pressure Sensors: NSC Series Uncompensated/Unamplified
TruStability Board Mount Pressure Sensors: NSC Series Uncompensated/Unamplified DESCRIPTION The TruStability NSC Series-Uncompensated/Unamplified is a piezoresistive silicon pressure sensor offering a
More informationSpecification for Approval
Specification for Approval Part No : LWM1056N comments LUXPIA Co., Ltd. Designed by Checked by Approved by Approved by Approved by Approved by / / / / / / Date :... Date :... LUXPIA CO.,LTD. 948-1, Dunsan-Li
More informationSpecification for Approval
Specification for Approval (Ver 1.0) Part No. : LWH1000N comments LUXPIA Co., Ltd. Designed by Checked by Approved by Approved by Approved by Approved by / / / / / / Date :... Date :... LUXPIA CO.,LTD.
More informationD-PAK Voiding: A Study to Determine the Origins of D-PAK Voiding
As originally published in the SMTA Proceedings D-PAK Voiding: A Study to Determine the Origins of D-PAK Voiding Kim Flanagan and Greg Wade Indium Corporation Clinton, NY Abstract Voiding in bottom termination
More information(TRCM) Wire Wound RF SMD Inductor
Version: February 17, 2017 (TRCM) Wire Wound RF SMD Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
More informationP9000 Series Pressure Transducer
High accuracy through digital compensation High thermal stability Rugged stainless steel construction Ideal for test stands High burst pressure limit DESRIPTION The P9000 Series is a range of advanced,
More informationMeasuring the Benefits of Nitrogen for Reflow U.S. Robotics, Morton Grove, IL
Measuring the Benefits of for Reflow U.S. Robotics, Morton Grove, IL Chad Boeding, Mark Nowotarski Praxair, 777 Old Saw Mill River Road, Tarrytown, NY 10591-6799 Julie Bradbury, Denis Jean U.S. Robotics,
More informationASDX Series Silicon Pressure Sensors
ASDX Series Silicon Pressure Sensors DESCRIPTION The ASDX Series is a Silicon Pressure Sensor offering a ratiometric analog interface for reading pressure over the specified full scale pressure span and
More informationPiston Accumulators Series Catalog ontents
atalog 1630-7ontents Piston ccumulators Series 3000 Series 3000 Piston ccumulators Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring
More informationLeak-Free Load-Control Valve SAE ½ psi flange
Leak-Free Load-Control Valve SE ½ - 6000 psi flange Q max = 150 l/min [40 gpm], p max = 420 bar [6000 psi] leak-proof, two-stage hydraulic, SE-flange design 12--S... 1 Description Two-stage load-control
More informationFL200 Monochromatic Architectural Spot and Floodlight
DATE: TYPE: COMPANY: PROJECT: 360 375mm 14.7in 463mm 18.2in 269mm 10.7in 421mm 16.6in 77mm 3.0in *SM bracket mounting option shown. See page 2 for more mounting options. FEATURES: OPTIONS: Over 16,500
More informationVLT 2000 Series. How to size your VLT
Selection of frequency converter Usually the size of frequency converter is chosen on the basis of the shaft output, as this may be the only value known. However, if the data are known for both the application,
More informationSide View PLCC 2.8(L) x 1.2(W) x 0.8(H)mm
022 SMD LED S MD LED lamps from Lite-On are available in miniature sizes and special configurations for automated PC board assembly and space-sensitive applications. These SMD LED lamps are suitable for
More information