BOURNS INDUCTIVE COMPONENTS

Transcription

1 Ⅰ. Configuration and dimensions: REF. : REV. G ( ) PGE 1 Marking ot is the Inductance code reading marking F E C ( PC Pattern ) Unit:m/m 7.50 ± ±0.3 C 2.60 ref ref. E 7.80 ref. F 2.40 ref. Ⅱ. escription: a. Ferrite drum core construction. b. Enamelled copper wire:f H class c. Product weight: 0.810g(ref.) d. Moisture sensitivity Level 1 e. Products comply with RoHS' requirements f. Halogen free available 250 Temperature Rising rea +4.0 / sec max. Preheat rea 150 ~ 200 / 60 ~ 120sec Peak Temp:250 max. Max. Peak Temp - 5 :30sec max. Max time above 217 :60sec~150sec max. Reflow rea +3.0 / sec max. Forced Cooling rea -(1.0 ~ 5.0) / sec max. Peak Temperature: Ⅲ. General specification: a. Storage temp.: b. Operating temp.: (Temp. rise included) c. Resistance to solder heat: secs. Temperature ( ) sec~120sec 60sec max. 60sec~150sec Time ( seconds )

2 Ⅳ. Electrical characteristics: SR0805-1R5ML SR0805-2R5ML SR0805-3R3ML SR0805-3R9ML SR0805-4R7ML SR0805-5R6ML SR0805-6R8ML SR0805-8R2ML SR ML SR ML SR ML SR ML SR ML SR ML SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR0805-KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL SR KL Inductance ( μh ) 1.5±20% 2.5±20% 3.3±20% 3.9±20% 4.7±20% 5.6±20% 6.8±20% 8.2±20% 1±20% 12.0±20% 15.0±20% 18.0±20% 22.0±20% 27.0±20% 33.0±10% 39.0±10% 47.0±10% 56.0±10% 68.0±10% 82.0±10% 10±10% 12±10% 15±10% 18±10% 22±10% 27±10% 33±10% 39±10% 47±10% 56±10% 68±10% 82±10% 100±10% 120±10% 150±10% 180±10% 220±10% 270±10% 330±10% 390±10% 470±10% 1). Electrical specifications at 25 2). IC base on L/L0=10% max. & Temp. rise 40 max. REF. : REV. G ( ) Q Test Freq. ( Hz ) SRF ( MHz ) ref. L Q nom. 32 1k 7.960M k 7.960M k 7.960M k 7.960M k 7.960M k 7.960M k 7.960M k 7.960M k 2.520M k 2.520M k 2.520M k 2.520M k 2.520M k 2.520M k 2.520M k 2.520M k 2.520M k 2.520M k 2.520M k 2.520M k 0.796M k 0.796M k 0.796M k 0.796M k 0.796M k 0.796M k 0.796M k 0.796M k 0.796M k 0.796M k 0.796M k 0.796M k 0.252M k 0.252M k 0.252M k 0.252M k 0.252M k 0.252M k 0.252M k 0.252M k 0.252M 1.0 RC ( Ω ) max PGE 2 IC ( ) max

3 Ⅴ. Curve: SR0805-1R5ML REF. : REV. G ( ) PGE T( ) SR ML SR KL SR KL 5, , ,000 2, ,

4 ( 1 ) Configuration Ⅵ. Packaging information: REF. : REV. G ( ) PGE 4 T 2.0±0.5 Cover tape N C C G Embossed carrier Carrier tape width : End P:12 m/m 4 m/m Start Leader Trailer no component 200 m/m min. Components no component 400 m/m min. User direction of feed ( 2 ) imensions Unit:m/m Style C G N T ±0.8 13± ( 3 ) Q'TY & G.W. Per package Inner : Reel Outer : Carton Q'TY (pcs) G.W. (gw) Style Q'TY (pcs) G.W. (Kg) SIZE (cm) 1, , x 37 x 22

5 Ⅶ. Reliability test: REF. : REV. G ( ) PGE 5 Item Reference documents Test Condition Test Specification 1.High Temperature Exposure MIL-ST-202 Method Temperature Cycling JES iased Humidity Test MIL-ST-202 Method Operational Life JES External Visual 6.Physical imensions 7.Resistance to solvents JES & MIL-ST-883 Method 2009 JES MIL-ST-202 Method Vibration Test MIL-ST-202 Method Resistance To MIL-ST-202 Method 210 Soldering Heat Test & J-ST Saturation Current 11.Over load JIS C 6436 & User SPEC. JIS C 6436 & User SPEC. 1.Temperature: 125±2 2.Time:96±2 hours. 1.Temperature: -40 ~ Number of cycle:100 cycle 3.well time:30 minutes 1.Temperature:85±2 2.Humidity: 85% RH. 3.Time:96±2 Hours 1.Temperature: 125 (Temp. rise included) 2.Time:96±2 hours. 3.Rated current Inspect product constructions, marking and workmanship. Verify physical dimensions to the applicable product detail specification. Immerse into solvent for 3±0.5 minutes & brush 10 times for 3 cycles. 1.Frequency and mplitued : Hz, 1.5 mm. 2.irection:X, Y, Z 3.Test duration:2 hours for each direction, 6 hours in total. 1.Highest temperature: 250±5. 2.Time(temp. 217 ):60~150 Second. 3.IR reflow times:3 times. 1.pplied rated current for 5 second. 2.Saturation current 1.pplied one and half rated current for a period of 5 minutes. 2.Rated current 1.pplied rated current for 10 minutes. 12.Temperature Rise JIS C 6436 & 2.Temperature measure by digital surface Current User SPEC. thermometer. 3.Irms current 13.Solderability Test 14.Electrical Characteriazation 15.rop 16.Terminal Strength Test J-ST-002 & JES MIL-ST-202 Method 304 & User SPEC. 1.aking in pre-testing: 150±5 / 16Hours±30 min. 2.Peak temperature:240±5 3.Time(temp. 217 ):60~150 second. 4.IR reflow times:1 times. 1.Operating temperature:-40 ~125 2.Room temperature:25. 1.Products shall be mounted on SPEC. pcb and dropped down from a heigh of 1m CNS-C6354 & G/T rop total time:6 time (Every side ofsample drop 2 time) IEC pply push force to samples mounted on PC. 2.Force of 1.8 kg for 60±1 seconds. 1.No pollution on the surface of products. 2.Clear marking. 3.No crack. Per product specification standard 1.No body change in apperarance. 2.No marking blurred. 3.Inductance shall not change Inductance shall not drop more than 10% max. No electrical or mechanical damage Surface temperature rise is less than 40 max. More than 95% soldering coverage min on terminations. 1. dhesion on PC shall be enough. 2. Product appearance shall not break. 3. No electrical damage. fter test, inductors shall be no mechanical damage.