Flat Bench. Use various tools and clamps in process of welding, so you could weld the items together with accuracy.

Transcription

1 Project: Flat Bench Page 1 of 50 Flat Bench The measurements within this text and 2D documentation are given both in millimeters and inches (in brackets). This website is based on ISO measurement unit system, which is the international standard. I apologize to the people who use other measurement units; but I believe that measurements given in millimeters and inches should be adequate for everyone who would like to build this project. Besides that, on today s Internet it is easy to purchase the ruler that contains all the measurement units and thus overcome the difficulties of any kind. Use various tools and clamps in process of welding, so you could weld the items together with accuracy.

2 Subassembly list Project: Flat Bench Page 2 of 50

3 1. Flat Bench Subassembly Parts List and 2D Documentation Project: Flat Bench Page 3 of 50

4 Project: Flat Bench Page 4 of 50

5 Frame Components Project: Flat Bench Page 5 of 50

6 Project: Flat Bench Page 6 of 50

7 Project: Flat Bench Page 7 of 50

8 Project: Flat Bench Page 8 of 50

9 Project: Flat Bench Page 9 of 50

10 Project: Flat Bench Page 10 of 50

11 Standard Parts Project: Flat Bench Page 11 of 50

12 2. Stand Subassembly Parts List and 2D Documentation Project: Flat Bench Page 12 of 50

13 Project: Flat Bench Page 13 of 50

14 Frame Components Project: Flat Bench Page 14 of 50

15 Project: Flat Bench Page 15 of 50

16 Project: Flat Bench Page 16 of 50

17 Project: Flat Bench Page 17 of 50

18 Project: Flat Bench Page 18 of 50

19 Project: Flat Bench Page 19 of 50

20 3. Weight set subassembly Parts List and 2D Documentation Project: Flat Bench Page 20 of 50

21 Project: Flat Bench Page 21 of 50

22 Project: Flat Bench Page 22 of 50

23 Project: Flat Bench Page 23 of 50

24 Project: Flat Bench Page 24 of 50

25 Project: Flat Bench Page 25 of 50

26 Project: Flat Bench Page 26 of 50

27 Project: Flat Bench Page 27 of 50

28 Project: Flat Bench Page 28 of 50

29 Project: Flat Bench Page 29 of 50

30 Assemblage Instruction 1. Flat Bench Subassembly Project: Flat Bench Page 30 of 50 Use various tools and clamps in process of welding, so you could weld the items together with accuracy. 1. Weld the Cover 50x50mm (item 13) to the Square Tubing 50x50x4 Cut Lenght 400,00mm (item 5). Make two of these subassemblies.

31 Project: Flat Bench Page 31 of Weld the Square Tubing 50x50x4 Cut Length 365,36mm (item 1) to the assembly made in the previous step. Project from

32 Project: Flat Bench Page 32 of Weld the Square Tubing 50x50x4 Cut Length 190,42mm (item 2) to the subassembly made in the previous step, but first chamfer the edges that needs to be weld.

33 Project: Flat Bench Page 33 of Weld the Square Tubing 50x50x4 Cut Length 500,00mm (item 4) to the assembly made in step 1.

34 Project: Flat Bench Page 34 of Weld the Square Tubing 50x50x4 Cut Length 1435,36mm (item 3) to the subassemblies made in step 3 and 4, but first chamfer the edges that needs to be weld.

35 Project: Flat Bench Page 35 of 50 Project from

36 Project: Flat Bench Page 36 of Weld the Sheet Support (item 8) and Triangle Support (item 9) together. Make six of these subassemblies. 7. Weld this six subassemblies made in previous step to the subassembly made in step 5.

37 Project: Flat Bench Page 37 of 50 Project from

38 Project: Flat Bench Page 38 of Fasten the Sheet (item 7) on the subassembly made in the previous step using fasteners: Slotted Pan Head Screw M5x30 (item 10), Spring Lock Washer (item 11) and Hexagon Nut M5 (item 12).

39 Project: Flat Bench Page 39 of Weld the Round Tubing D25,4x3,2mm Cut Lenght 300,00mm (item 6) to the assembly made in the previous step.

40 Project: Flat Bench Page 40 of Weld the Cover D25,4mm (item 14) on the Round Tubing D25,4x3,2mm (item 6).

41 Project: Flat Bench Page 41 of Stand Subassembly 1. Weld the Cover 50x30mm (items 5) to the Rectangular Tubing 50x30x2,6, Cut Lenght 350,00mm (item 1).

42 Project: Flat Bench Page 42 of Make one more piece of these subassembly.

43 Project: Flat Bench Page 43 of Weld the Rectangular Tubing 50x30x2,6 Cut Lenght 300,00mm (item 2) between these two subassemblies. Project from

44 Project: Flat Bench Page 44 of Weld the Square Tubing 40x40x4mm Cut Lenght 885,00mm (item 3) to the subassembly made in the previous step.

45 Project: Flat Bench Page 45 of Weld the Square Tubing 40x40x4mm Cut Lenght 150,5mm (item 4) to the subassembly made in the previous step.

46 Project: Flat Bench Page 46 of Weld the Square Tubing 30x30x3mm Cut Lenght 787,00mm (item 6) and the Dumbbell Holder (item 8) together.

47 Project: Flat Bench Page 47 of Insert the subassembly made in the previous step into the Square Tubing 40x40x4mm Cut Lenght 885,00mm (item 3) (subassembly from step 5) and fasten it with Cotter (item 7) at height by your choice. Project from

48 Project: Flat Bench Page 48 of Weight Set Subassembly 1. Weld the Delimiter (item 2) to the Round Tubing D31,8x6,3mm (item 1).

49 Project: Flat Bench Page 49 of Line up the dumbbells at the both ends of subassembly made in the previous step.

50 Project: Flat Bench Page 50 of Fix the dumbbells using Dumbbell Nut (items 5).