SPECIFICATIONS. EX-7 series. HYDRAULIC EXCAVATOR EX with Diesel Engine D&D' C G I H J A B. Rear-end length mm (19 ft. 8 in.

Transcription

1 EX-7 series SPECIFICATIONS E D&D' F K C G I H J A B Illustrations show diesel engine type. A B C D D' E F G H I J K Distance between tumblers Undercarriage length Counterweight clearance Rear-end swing radius Rear-end length Overall width of upperstructure Overall height of cab Min. ground clearance Track gauge Track shoe width Undercarriage width Track height 7000 mm (23 ft.) 9350 mm (30 ft. in.) 29 mm (9 ft. 7 in.) 7970 mm (26 ft. 2 in.) 760 mm (25 ft. 9 in.) 300 mm (3 ft.) 600 mm (2 ft. 3 in.) 10 mm (3 ft. 7 in.) 6000 mm (19 ft. in.) 0 mm (55 in.) 700 mm (2 ft. 3 in.) 2730 mm (9 ft.) HYDRAULIC EXCAVATOR EX with Diesel Engine Cummins : 2 x 1119 kw (1,500 hp) MTU : 2 x 1150 kw (1,52 hp) Operating Weight : Loading Shovel : kg (1,199,315 lb.) Backhoe : kg (1,2,33 lb.) Bucket Capacity Loading Shovel Bucket : ISO Heaped : m3 ( cu. yd) Backhoe Bucket : ISO Heaped : 3.0 m3 (.5 cu. yd)

2 SPECIFICATIONS EX ENGINE Model... Cummins QSKTA50-CE Emission certification... U.S. EPA Tier FINAL Type... Water-cooled, -cycle, 16-cylinder turbo-charged and after-cooled, direct injection chamber-type diesel engine, urea SCR system Rated power SAE J1995, gross... 2 x 1119 kw (1,500 hp) at 100 min -1 (rpm) Net... 2 x 69 kw (1,3 hp) at 100 min -1 (rpm) Maximum torque... 2 x 6570 N m (670 kgf m) at 0 min -1 (rpm) Piston displacement... 2 x 50.0 L (2 x 3,051 cu. in.) Bore and stroke mm x 159 mm (6.3 in. x 6.3 in.) Starting system... 2 V electric motor Batteries... 6 x 12 V, 6 x 15 AH Model... MTU 12V000 C15 Emission certification... U.S. EPA Tier FINAL Type... Water-cooled, -cycle, 12-cylinder 2-stage turbo-charged and aftercooled, direct injection chamber-type diesel engine, Miller cycle, Cooled EGR Rated power SAE J1995, gross... 2 x 1150 kw (1,52 hp) at 100 min -1 (rpm) Net... 2 x 7 kw (1,5 hp) at 100 min -1 (rpm) Maximum torque... 2 x 7351 N m (750 kgf m) at 19 min -1 (rpm) Piston displacement... 2 x 57.2 L (2 x 3,91 cu. in.) Bore and stroke mm x 2 mm (6.7 in. x.3 in.) Starting system... 2 V electric motor Batteries... 6 x 12 V, 6 x 15 AH HYDRAULIC SYSTEM Hitachi's ETS (Electronic Total control System) can achieve maximum job efficiency by reducing fuel consumption and noise levels, while maximizing productivity through the optimization of engine-pump functions with excellent controllability increasing operator comfort. E-P Control (Computer-aided Engine-Pump Control system) Main pumps regulated by electric engine speed sensing control system. OHS (Optimum Hydraulic System) 12 main pumps and 6 valves system enable both independent and combined operations of all functions. FPS (Fuel-saving Pump System) FPS minimizes energy loss with superior performance in fine control. Auto-idling system for saving fuel and reducing noise. Hydraulic drive cooling-fan system for oil cooler. Forced-lubrication and forced-cooling pump drive system. Main pumps variable-displacement, axial piston pumps for front attachment, travel and swing. Max. oil flow... X 375 L/min, X 25 L/min x 375 L/min ( x 99.1 gal./min.), x 25 L/min ( x gal./min.) Pilot pump... 2 gear pump Max. oil flow... 2 x L/min (2.5 gal./min.) Relief Valve Settings Implement circuit... Swing circuit... Travel circuit... Pilot circuit... Cylinder Dimensions Loading Shovel 29. MPa (300 kgf/cm²) (,26 psi) 2.5 MPa (250 kgf/cm²) (3,553 psi) 29. MPa (300 kgf/cm²) (,26 psi) 3.9 MPa (0 kgf/cm²) (566 psi) Hydraulic Cylinders High-strength piston rods and tubes adopted. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Bucket cylinders of loading shovel are provided with protector. Quantity Bore Rod diameter Boom 2 mm (16.5 in.) 300 mm (11. in.) Arm mm (1.2 in.) 260 mm (.2 in.) Bucket 2 30 mm (13. in.) 250 mm (9. in.) Dump 2 mm (11 in.) 160 mm (6.3 in.) Level 1 mm (16.5 in.) 300 mm (11. in.) Backhoe Quantity Bore Rod diameter BE-boom 2 mm (16.5 in.) 300 mm (11. in.) BE-arm mm (1.2 in.) 260 mm (.2 in.) Bucket 2 3 mm (12.2 in.) 230 mm (9.1 in.) Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Quantity Full flow filter 6 µm High pressure strainer 12 1 µm (In main & swing pump delivery line) Drain filter 1 µm (For all plunger type pumps & motors) By-pass filter 1 5 µm Pilot filter 2 µm These filters are centralized in arrangement for facilitating maintenance. CONTROLS 2 Implement Levers Electric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. For loading shovel, 2 pedals provided for opening/closing the bottom dump bucket. 2 Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. 1 Left Console Bucket Close Pedal (For Loading Shovel) 2 Left Control Lever/Horn Switch 11 Bucket Open Pedal (For Loading Shovel) 3 Left Travel Pedal 12 Pilot Control Shut-Off Lever Left Travel Lever 13 Rear Console 5 Right Travel Lever 1 Emergency Engine Stop Switch 6 Right Travel Pedal 15 Engine Speed Control Dial 7 Right Control Lever/Horn Switch 16 Key Switch Right Console 17 Monitor Display 9 Operator s Seat UPPERSTRUCTURE Revolving Frame A deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. Sidewalks provide easy access to engines, hydraulic and electrical components. ISO-met stairs and handrails. Sidewalks and stairs are provided with skid-resistant plates Diesel Engine x 2 15 Battery Unit 2 Engine Radiator x 2 16 Cab 3 Pump Drive Unit 17 Air Filter (Outer / Inner) x Hydraulic Pump x 12 1 Muffler 5 Engine-Pump Bulkhead 19 Folding Stairs 6 Hydraulic Tank Fuel Cooler 7 Fuel Tank 21 Reserve Tank (Coolant) x 2 Control Valve x 6 22 LTA Radiator x 2 9 High-Pressure Strainer x Pump Transmission Oil Cooler x 2 Hydraulic Oil Cooler x 2 DEF Tank (Only for Cummins Tier F) x 2 11 Hydraulic Oil Cooling Fan Motor x 2 25 Fuel Filter (Water Separator) x 2 12 Lubricator 26 Ladder 13 Swing Device x 27 Isolation Switch Box 1 Center Joint Swing Device high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. Swing speed min -1 (rpm) Operator's Cab The sturdy cab, with OPG top guard level II (ISO), helps protect the operator from falling objects. Independent, pressurized, 100 mm (5 ft. 11 in.), 2150 mm (7 ft. 1 in.) high, roomy 7.5 m 3 (9. cu. yd.) cab with tinted-glass windows features all-round visibility. Air-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instruments and control panel are within easy reach of the operator. 3 air conditioner system. Noise level db(a) in the cab; on max. engine speed under no-load condition Eye level height mm (25 ft. 1 in.)

3 SPECIFICATIONS EX UNDERCARRIAGE Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Specially heat-treated connection pins. Hydraulic track adjuster provided with N2 gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser track shoes of induction-hardened cast steel. Shoe width...0 mm (55 in.) Numbers of Rollers and Shoes (each Side) Upper rollers... 3 Lower rollers... 7 Track shoes Travel Device Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. 2-stage planetary gear plus spur gears reduction device. Dual-support-type travel device. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. Travel speeds... High : km/h (0-1. mph) Low : km/h (0-1 mph) Maximum traction force kn/ kgf (500,9 lbf.) Gradeability... 5% (30 degree) max. WEIGHTS AND GROUND PRESSURE Loading Shovel Equipped with 29-m 3 (3 cu. yd.) ISO heaped bottom dump bucket Shoe type Shoe width Operating weight Ground pressure Triple grousers 0 mm (55 in.) kg (1,199,315 lb.) 2 kpa (2.9 kgf/cm 2 ) (35. psi) Backhoe Equipped with.1-m (33 ft. 2 in.) BE boom, 5-m (16 ft. 5 in.) BE arm and 3-m 3 (.5 cu. yd.) ISO heaped bucket Shoe type Shoe width Operating weight Ground pressure 0 mm kg 26 kpa Triple grousers (55 in.) (1,2,33 lb.) (2.51 kgf/cm 2 ) (35.7 psi) SERVICE REFILL CAPACITIES Fuel tank DEF tank (only Cummins engine, Tier final specificaiton) Engine coolant Engine oil Pump drive Swing device ( units) Travel device (2 units) Hydraulic system Hydraulic oil tank L (2,95 gal.) 356 L (9 gal.) 2 x 50 L (2 x 119 gal.) 2 x 290 L (2 x 77 gal.) 2 x 30 L (2 x gal.) x L ( x 22 gal.) 2 x 30 L (2 x 90 gal.) 60 L (1,63 gal.) 20 L (51 gal.) LOADING SHOVEL ATTACHMENTS Boom and arm are of all-welded, low-stress, high-tensile strength steel fullbox section design. Efficient, automatic level crowding achieved by onelever control as the parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism). Bucket Capacity ISO 756 (Heaped 2:1) 27.0 m 3 (35.3 cu. yd.) 29.0 m 3 (3 cu yd.) WORKING RANGES Feet Meters E F E' EH000AC-3 Width No.of teeth Weight Type Materials density 00 mm (15 ft. 9 in.) 00 mm (15 ft. 9 in.) C H D B kg (95,61 lb.) 6 0 kg (97, lb.) Meters Feet G A Ground Line Bottom dump type general purpose Bottom dump type general purpose Bucket capacity ISO 756 (Heaped 2:1) 27.0 m 3 (35.3 cu. yd.) A Min. digging distance 6150 mm ( ft. 2 in.) B Min. level crowding distance 900 mm (32 ft. 2 in.) C Level crowding distance 5550 mm (1 ft. 3 in.) D Max. digging reach mm (5 ft. 6 in.) E Max. cutting height mm (62 ft.) E Max. dumping height 13 0 mm (3 ft.) F Max. digging depth 550 mm (1 ft. 11 in.) G Working radius at max. 900 mm dumping height (29 ft. 2 in.) H Max. bucket opening width 2700 mm ( ft. in.) Arm crowding force on ground Bucket digging force 1570 kn / kgf (352,950 lbf.) 17 kn / kgf (3,23 lbf.) 1900 kg/m 3 or less (3,3 lb./cu. yd.) 100 kg/m 3 or less (3,03 lb./cu. yd.) 29.0 m 3 (3 cu. yd.) 600 mm (21 ft.) 050 mm (33 ft.) 5350 mm (17 ft. 7 in.) mm (55 ft. 9 in.) 19 0 mm (63 ft.) 13 0 mm (3 ft.) 00 mm (15 ft. 9 in.) 900 mm (29 ft. 2 in.) 2700 mm ( ft. in.) 15 kn / kgf (31,7 lbf.) 1590 kn / kgf (357,6 lbf.) 5

4 SPECIFICATIONS EX BACKHOE ATTACHMENTS Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Bucket Capacity Width No.of ISO 751 (Heaped 1:1) With side cutters Without side cutters teeth 3.0 m 3 60 mm kg (.5 cu. yd.) (15 ft. 3 in.) (71,30 lb.) WORKING RANGES Feet Meters C D B B' F D EH000AC Meters Feet ' A A' E G Ground Line Weight Type Materials density general purpose BE-boom length BE-arm length Bucket capacity ISO 751 (Heaped 1:1) A Max. digging reach A' Max. digging reach (on ground) B Max. digging depth B' Max. digging depth (2.5 m level) C Max. cutting height D Max. dumping height D' Min. dumping height E Min. swing radius F Max. vertical wall G Min. level crowding distance Bucket digging force (ISO)* Arm crowd force (ISO)* 100 kg/m 3 or less (3,03 lb./cu. yd.).1 m (33 ft. 2 in.) 5 m (16 ft. 5 in.) 3 m 3 (.5 cu. yd.) 0 mm (66 ft. 3 in.) mm (63 ft. in.) 00 mm (2 ft. 11 in.) 700 mm (2 ft. 7 in.) mm (6 ft. in.) 12 0 mm (0 ft.) 50 mm (17 ft. 1 in.) 9900 mm (32 ft. 6 in.) 300 mm (1 ft. 1 in.) 70 mm (23 ft. in.) 10 kn / kgf (332,717 lbf.) 1300 kn / kgf (292,252 lbf.) *This is the calculated value at the loading point (Cutting Edge) conforming to ISO. EQUIPMENT EX STANDARD EQUIPMENT ENGINE Auto-idle system Cartridge-type engine oil bypass filter Cartridge-type engine oil filter Cartridge-type fuel filter Emergency engine stop system Fan guard Heavy-duty type air cleaner with dust ejector Isolation-mounted engine Pre-lubrication system Radiator reserve tank Water filter A alternator HYDRAULIC SYSTEM Bypass filter Control valve with main relief valve Drain filter E-P control system Forced-lubrication and forced-cooling pump drive system FPS (Fuel-saving Pump System) Full-flow filter High-pressure strainer Hydraulic drive cooling-fan system OHS (Optimum Hydraulic System) Pilot filter Regeneration circuit for boom down function Suction filter CAB Adjustable reclining seat with air suspension Air conditioner with defroster Air horn with electric compressor Auto-tuning AM-FM radio with digital clock Emergency escape device Evacuation hammer Floor mat Fluid-filled elastic mounts Footrest Front windshield washer Hot & cool-box Laminated glass windshield OPG top guard level ll (ISO) Parallel-link-type intermittent windshield wiper Pilot control shut-off lever Rearview mirror Reinforced/tinted (Green color) glass side and rear windows Roll screens Seat belt Storage spaces Trainer's seat Standard equipment may vary by country, so please consult your Hitachi dealer for details. Meters: Ambient temperature Battery voltage gauge Clock Engine coolant temperature gauge (R). (L) Engine oil pressure gauge (R). (L) Engine oil temperature gauge (R). (L) Fuel gauge Hour meter Hydraulic oil temperature gauge (R). (L) Tachometer (R). (L) Pilot lamps (Green): Auto-Idle Pre-lubrication Travel mode Warning lamps (Red): Alternator (R). (L) Auto-lubrication Coolant level (R). (L) Coolant overheat (R). (L) Electric lever Emergency engine stop Engine oil pressure (R). (L) Engine over run Engine stop (R). (L) Fast-filling Hydraulic oil level Pump transmission oil level indicator (R). (L) Stop valve Tension Warning lamp (Yellow): Air cleaner restriction (R). (L) Electrical equipment box Engine warning (R). (L) Exhaust temperature (R). (L) Fuel temperature (R). (L) Hydraulic oil overheat Pump contamination Stairway position Warning lamps (Amber): Fast-filling Alarm buzzers: Electric lever fault Engine coolant level (R). (L) Engine oil pressure (R). (L) Engine oil temperature (R). (L) Fast-filling system panel position Fuel temperature (R). (L) Hydraulic oil level Overheat (R). (L) Pump transmission oil level Stairway position Stop valve close On-board inclinometer DATA LOGGING SYSTEM DLU (Data-logging unit) continuously records performance of the engine and the hydraulic system. The record can be downloaded by PC. And for Fleet management system (Provided by Wenco etc.) connection* Satellite data transmitting system WIU (Wireless Interface Unit)** LIGHTS 3 entrance LED lights working LED lights maintenance room lights UPPERSTRUCTURE Battery isolator switch Cab riser pressurizer Electronic cylinder stroke control system Electric oil pump to draw hydraulic oil from suction and return pipe lines Folding stairs with wide steps Hydraulic drive grease gun with hose reel Lockable machine covers Starter isolator switch Swing parking brake color monitor cameras ; 2 front and 2 rear 00 kg counterweight UNDERCARRIAGE Grease-less center joint Hydraulic track adjuster with N2 gas accumulator with relief valve Swing circle excess grease scraper Swing circle lubrication piping protection Travel motion alarm device Travel parking brake 0 mm (55 in.) triple grouser shoes MISCELLANEOUS Auto-lubrication system (Lincoln) for front-attachment pins, swing bearing and center joint. Emergency stop switches Emergency escape chute Engine oil reserve system Recirculation air filter for air conditioner Stairs and handrails (Meeting ISO) Stop valve for transport and reassembly Ventilation air filter for air conditioner 12 V power terminal board FAST-FILLING SYSTEM Fast-filling system (Wiggins) for fuel, hydraulic oil, coolant, swing device oil, pump transmission oil, engine oil, and grease. Fast-filling couplers included. Aerial Angle Cold weather package* Communication system (Alternative)** GPRS communication system High altitude application* Optional equipment may vary by country, so please consult your Hitachi dealer for details. Standard tool kit Travel motor guard Travel transmission guard Track under cover * Enginneered on request. ** The availability of the system depends on licensing regulations in each country. Please contact Hitachi dealer for more information. 6 7

5 TRANSPORTATION Illustrations show diesel engine type. Easily assembled owing to local assembling system requiring no welding. Overall width of below 3500 mm (11 ft. 6 in.) during transportation. UPPERSTRUCTURE Cab Weight : 100 kg (3,96 lb.) 0 mm (9 ft. 3 in.) Main frame assembly Weight : 50 0 kg (1,52 lb.) Water tank (left / right) Weight : 177 kg (391 lb.) Ladder Weight : 6 kg (1,66 lb.) Box Weight : 953 kg (2,1 lb.) Isolation switch box Weight : 292 kg (6 lb.) 2 mm (3 ft. in.) 960 mm (3 ft. 2 in.) 2700 mm ( ft. in.) Width : 176 mm (6 ft. 2 in.) 3260 mm ( ft. in.) 39 mm (3 ft. 1 in.) Width : 3500 mm (11 ft. 6 in.) 766 mm (30 in.) 112 mm (3 ft. 9 in.) Width : 735 mm (2 ft. 5 in.) 3593 mm (11 ft. 9 in.) 2131 mm (7 ft.) Width : 10 mm (3 ft. 7 in.) 1690 mm (5 ft. 7 in.) 1366 mm ( ft. 6 in.) Width : 1115 mm (3 ft. in.) 2121 mm (7 ft.) Valve assembly Weight : 770 kg (16,69 lb.) 370 mm (11 ft. 5 in.) Width : 3090 mm ( ft. 2 in.) 25 mm ( ft. 3 in.) Left unit urea tank Weight : 550 kg (1,213 lb.) 600 mm (2 in.) 50 mm (21 in.) Right unit urea tank Weight : 550 kg (1,213 lb.) 37 mm (6 ft. in.) 37 mm (6 ft. in.) 100 mm (5 ft. 11 in.) 100 mm (5 ft. 11 in.) 0 mm ( in.) 7 mm (3 ft. 6 in.) 50 mm (21 in.) 600 mm (2 in.) 0 mm ( in.) 7 mm (3 ft. 6 in.) 1 mm ( ft. in.) Counterweight (left) Weight : kg (53,573 lb.) Width: 153 mm (5 ft. 1 in.) Counterweight (right) Weight : kg (52,691 lb.) 530 mm (17 ft. 6 in.) 530 mm (17 ft. 6 in.) Width: 153 mm (5 ft. 1 in.) 1 mm ( ft. in.) Engine unit (left) Weight : 27 0 kg (59,966 lb.) 9 mm (30 ft. in.) 95 mm ( in.) Engine unit (right) Weight : kg (62,391 lb.) 95 mm (31 ft. 3 in.) 93 mm ( in.) Weight : 19 kg (3 lb.) Weight : 21 kg (7 lb.) Weight : 21 kg (7 lb.) Weight : 19 kg (3 lb.) 33 mm ( ft. in.) 30 mm (11 ft. 5 in.) 33 mm ( ft. in.) 30 mm (11 ft. 5 in.) 91 mm (3 ft. 3 in.) 2330 mm (7 ft. in.) 91 mm (3 ft. 3 in.) 22 mm ( ft.) 22 mm ( ft.) 91 mm (3 ft. 3 in.) 2330 mm (7 ft. in.) 91 mm (3 ft. 3 in.) Width : 3270 mm ( ft. 9 in.) Width : 2535 mm ( ft. in.) Width : 23 mm (11 in.) Width : 335 mm (13 in.) Width : 335 mm (13 in.) Width : 23 mm (11 in.) Exhaust unit (left / right) Weight : 0 kg (3,07 lb.) mm (6 ft. 6 in.) Intake unit (left / right) Weight : 3 kg (706 lb.) x mm ( ft. 1 in.) Weight : 1 kg (0 lb.) Weight : 1 kg (0 lb.) Weight : 11 kg (25 lb.) Weight : 5 kg (12 lb.) Weight : 5 kg (12 lb.) 2251 mm (7 ft. 5 in.) 1260 mm ( ft. 2 in.) 1529 mm (5 ft.) 136 mm ( ft. 6 in.) 611 mm (2 in.) 611 mm (2 in.) 136 mm ( ft. 6 in.) 5 mm ( in.) 905 mm (3 ft.) 230 mm (9 in.) 90 mm (3 ft. 1 in.) 230 mm (9 in.) 70 mm (3 in.) Width : 00 mm (6 ft. 7 in.) 6 mm (2 in.) Width : 30 mm (1 in.) Width : 30 mm (1 in.) Width : 30 mm (1 in.) Width : 30 mm (1 in.) Width : 30 mm (1 in.) 9

6 TRANSPORTATION UPPERSTRUCTURE Hydraullc oil tank Weight : 6730 kg (1,3 lb.) Fuel tank Weight : 1 kg (9,0 lb.) Fuel cooler unit Weight : 156 kg (3 lb.) Weight : 236 kg (521 lb.) Weight : 257 kg (567 lb.) Weight : 25 kg (560 lb.) 130 mm ( ft. 3 in.) 2 mm (7 ft. 6 in.) 32 mm (3 ft. 5 in.) 0 mm (17 in.) 23 mm ( ft.) 237 mm ( ft.) 1995 mm (6 ft. 7 in.) Width : 2 mm (7 ft. 11 in.) Width : 677 mm (27 in.) Width : 677 mm (27 in.) Width : 677 mm (27 in.) Hydraullc oil pump assembly Weight : 3 kg (95 lb.) Weight : 15 kg (3 lb.) Weight : 15.1 kg (3 lb.) Weight : 15.2 kg (3 lb.) Pipe Weight : 3 kg ( lb.) 2 Pipe Weight : 13 kg (29 lb.) mm (22 in.) 550 mm (22 in.) 3 mm (12 in.) 3 mm (12 in.) 337 mm (11 ft. 1 in.) 331 mm ( ft. in.) 110 mm (3 ft. in.) 57 mm (6 ft. 9 in.) 57 mm (6 ft. 9 in.) Width : 23 mm (7 ft. 7 in.) 5 mm (35 in.) 560 mm (22 in.) 970 mm (3 ft. 2 in.) 970 mm (3 ft. 2 in.) 903 mm (3 ft.) 0 mm ( in.) mm (17 in.) 550 mm (22 in.) Width : 635 mm (25 in.) Width : 0 mm (2 in.) Width : 0 mm (2 in.) Width : 0 mm (2 in.) Weight : 9.1 kg (21 lb.) 605 mm (2 in.) 57 mm (6 ft. 9 in.) 56 mm (21 in.) Weight : 12 kg (27 lb.) 573 mm (23 in.) 573 mm (23 in.) Weight : 19 kg (2 lb.) 1113 mm (3 ft. in.) 973 mm (3 ft. 2 in.) 992 mm (3 ft. 3 in.) Weight : 23 kg (51 lb.) 139 mm ( ft. 7 in.) Weight : 11 kg (25 lb.) 992 mm (3 ft. 3 in.) 39 mm (15 in.) Escape device Weight : 192 kg (2 lb.) 1535 mm (5 ft.) 05 mm (3 ft. in.) 05 mm (16 in.) 1117 mm (3 ft. in.) Weight : 21 kg (7 lb.) 1566 mm (5 ft. 2 in.) 07 mm (3 ft. in.) Weight : 1 kg (0 lb.) 1219 mm ( ft.) Width : 131 mm (5 in.) Width : 266 mm ( in.) Width : 137 mm (5 in.) Width : 137 mm (5 in.) Width : 25 mm ( in.) Width : 131 mm (5 in.) Width : 97 mm ( in.) Weight : 2 kg (53 lb.) Weight :.7 kg ( lb.) Weight : 23 kg (51 lb.) Weight : 19 kg (2 lb.) Weight : 15 kg (3 lb.) Weight : 17 kg (3 lb.) Weight : 75 kg (166 lb.) Weight : 90 kg (199 lb.) 950 mm (3 ft. 1 in.) 22 mm (3 ft. in.) Width : 773 mm (30 in.) 331 mm (13 in.) 117 mm (3 ft. 9 in.) Width : 2 mm ( in.) 155 mm (6 ft. 1 in.) 771 mm (30 in.) Width : 265 mm ( in.) 1579 mm (5 ft. 2 in.) 1236 mm ( ft. 1 in.) Width : 3 mm (1 in.) 50 mm (23 in.) 1579 mm (5 ft. 2 in.) Width : 322 mm (13 in.) 01 mm (3 ft. 3 in.) 116 mm (3 ft. 11 in.) Width : 0 mm ( in.) 1257 mm ( ft. 1 in.) 13 mm ( ft. 5 in.) Width : 625 mm (25 in.) 1257 mm ( ft. 1 in.) 1539 mm (5 ft. 1 in.) Width : 66 mm (25 in.) 11

7 TRANSPORTATION UPPERSTRUCTURE Weight : 33 kg (73 lb.) Weight : 30 kg (67 lb.) Weight : 95 kg (2 lb.) Weight : 92 kg (3 lb.) Weight : 29 kg (6 lb.) Weight : 29 kg (6 lb.) Weight : kg (97 lb.) Weight : 25 kg (56 lb.) 07 mm (3 ft. in.) 2333 mm (7 ft. in.) 07 mm (3 ft. in.) 1655 mm (5 ft. 5 in.) 1257 mm ( ft. 1 in.) 1633 mm (5 ft. in.) 159 mm (5 ft. 3 in.) 167 mm (5 ft. 5 in.) 2250 mm (7 ft. 5 in.) 169 mm (5 ft. 6 in.) 1756 mm (5 ft. 9 in.) 1257 mm ( ft. 1 in.) 112 mm (3 ft. 9 in.) 07 mm (3 ft. in.) 117 mm (3 ft. 9 in.) 07 mm (3 ft. in.) Width : 39 mm (16 in.) Width : 309 mm (12 in.) Width : 665 mm (26 in.) Width : 625 mm (25 in.) Width : 309 mm (12 in.) Width : 39 mm (16 in.) Width : 37 mm (1 in.) Width : 7 mm ( in.) 112 mm (3 ft. 9 in.) Weight : 36 kg (0 lb.) 276 mm (9 ft. 1 in.) Width : 267 mm (11 in.) Weight : 29 kg (6 lb.) 112 mm (3 ft. 9 in.) 1779 mm (5 ft. in.) Width : 309 mm (12 in.) 07 mm (3 ft. in.) Weight : 26 kg (5 lb.) 2191 mm (7 ft. 2 in.) Width : 55 mm (2 in.) 07 mm (3 ft. in.) Weight : 29 kg (6 lb.) 1917 mm (6 ft. 3 in.) Width : 97 mm ( in.) Weight : 91 kg (1 lb.) 126 mm ( ft. 3 in.) Width : 577 mm (23 in.) Weight : 75 kg (166 lb.) Width : 560 mm (22 in.) Weight : 59 kg (131 lb.) 1661 mm (5 ft. 5 in.) 1675 mm (5 ft. 6 in.) 139 mm (6 ft.) 126 mm ( ft. 3 in.) 126 mm ( ft. 3 in.) Width : 6 mm (2 in.) 126 mm ( ft. 3 in.) 715 mm (2 in.) Weight : 126 kg (27 lb.) 2 mm (7 ft. 3 in.) Weight : 39 kg (6 lb.) Weight : 32 kg (71 lb.) Urea tank guard Weight : 31 kg (0 lb.) Weight : 316 kg (697 lb.) Weight : 9 kg ( lb.) Urea tank guard Weight : 31 kg (0 lb.) Weight : kg (97 lb.) 2393 mm (7 ft. in.) 15 mm (6 ft. 1 in.) 2250 mm (7 ft. 5 in.) 692 mm (27 in.) 126 mm ( ft. 2 in.) 1 mm (3 ft. 7 in.) 2250 mm (7 ft. 5 in.) 61 mm (27 in.) 133 mm (6 ft.) 1511 mm ( ft. 11 in.) 92 mm (3 ft. 3 in.) 929 mm (3 ft. 1 in.) 55 mm (3 in.) Width : 276 mm (11 in.) Width : 31 mm (15 in.) Width : 1256 mm ( ft. 2 in.) Width : 19 mm (7 in.) Width : 70 mm (19 in.) Weight : 300 kg (662 lb.) Weight : 162 kg (35 lb.) Weight : 16 kg (371 lb.) Weight : 162 kg (35 lb.) Weight : 560 kg (1,235 lb.) Weight : 169 kg (373 lb.) Weight : 162 kg (35 lb.) 2333 mm (7 ft. in.) 96 mm (35 in.) 2270 mm (7 ft. 5 in.) 1507 mm ( ft. 11 in.) 3197 mm ( ft. 6 in.) 2250 mm (7 ft. 5 in.) 9 mm (35 in.) 57 mm (6 ft. 9 in.) 1 mm (6 ft.) 56 mm (6 ft. 9 in.) 60 mm (6 ft. 9 in.) 1397 mm ( ft. 7 in.) 1 mm (6 ft.) 1397 mm ( ft. 7 in.) 07 mm (3 ft. in.) 07 mm (3 ft. in.) mm (35 in.) Width : 11 mm (32 in.) Width : 677 mm (27 in.) Width : 63 mm (27 in.) Width : 70 mm (31 in.) Width : 766 mm (30 in.) Width : 63 mm (27 in.) Width : 677 mm (27 in.) 12 13

8 TRANSPORTATION UNDERCARRIAGE LOADER ATTACHMENT Track center frame assembly Weight : 9 0 kg (,6 lb.) Front bucket Weight : 0 kg (,53 lb.) Rear bucket Weight : 500 kg (5,195 lb.) Arm assembly Weight : kg (6,739 lb.) 70 mm (6 ft. 9 in.) 350 mm (1 ft. 3 in.) 0 mm (13 ft. 9 in.) mm (17 in.) 330 mm (11 ft. 1 in.) 330 mm (11 ft. 1 in.) 1700 mm (5 ft. 7 in.) 000 mm (13 ft. 1 in.) 2560 mm ( ft. 5 in.) 550 mm (19 ft. 2 in.) 3500 mm (11 ft. 6 in.) 0 mm (13 ft. 5 in.) Width : 70 mm (15 ft. in.) Width : 790 mm (15 ft. 9 in.) Width : 3270 mm ( ft. 9 in.) Width : 62 mm ( ft. 1 in.) Weight : 27 kg (60 lb.) 2 Pipe Weight : 2 kg (5 lb.) Tooth Weight : 2 kg (53 lb.) 6 Track side frames Weight : kg (,279 lb.) 2 Track links Weight : 2 kg (1,0 lb.) 6 Track links Weight : 7370 kg (16,29 lb.) 2 33 mm ( ft. 11 in.) 9 mm ( in.) 750 mm (2 ft. in.) 2176 mm (7 ft. 2 in.) 395 mm (16 in.) 570 mm (17 ft. 11 in.) 395 mm (16 in.) 90 mm (16 ft. 2 in.) 67 mm (2 ft. in.) 770 mm (30 in.) 37 mm (1 in.) 71 mm (30 in.) Width : 260 mm ( ft. in.) Width : 0 mm ( ft. 7 in.) Width : 0 mm ( ft. 7 in.) Width : 97 mm ( in.) Width : 50 mm (2 in.) Width : 355 mm (1 in.) Guard assembly (R) Weight : 29 kg (6 lb.) 312 mm (12 in.) Guard assembly (L) Weight : 29 kg (6 lb.) 312 mm (12 in.) Scraper assembly Weight : 16 kg (36 lb.) 2 (L) Weight : 225 kg (97 lb.) (R) Weight : 225 kg (97 lb.) 252 mm ( in.) 129 mm ( ft. 3 in.) 129 mm ( ft. 3 in.) Boom assembly Weight : kg (1,131 lb.) 350 mm (1 in.) 270 mm (11 in.) 350 mm (1 in.) 270 mm (11 in.) 30 mm (13 in.) 90 mm (19 in.) 215 mm (7 ft.) Width : 79 mm (19 in.) 215 mm (7 ft.) Width : 79 mm (19 in.) 660 mm (2 ft. 5 in.) 0 mm (9 ft. 2 in.) Support (L) Weight : 92 kg (3 lb.) Support (R) Weight : 92 kg (3 lb.) Support (R) (L) Weight : 26 kg (5 lb.) 2 (R) (L) Weight : 12 kg (27 lb.) 2 Bracket (R) (L) Weight : 3 kg (7 lb.) 750 mm (30 in.) 16 mm ( ft. 9 in.) 16 mm ( ft. 9 in.) 750 mm (30 in.) 30 mm (13 in.) 69 mm (26 in.) mm (11 in.) 30 mm (13 in.) 15 mm (6 in.) Width : 3 mm ( ft. in.) 15 mm (6 in.) Width : 11 mm (5 in.) Width : 11 mm (5 in.) Width : 65 mm (26 in.) Width : 30 mm (13 in.) Width : 9 mm ( in.) 1 15

9 TRANSPORTATION LOADER ATTACHMENT BACKHOE ATTACHMENT Arm cylinder Weight : 3 kg (9,52 lb.) Boom cylinders Weight : 6600 kg (1,551 lb.) 2 Bucket assembly Capacity : 3.0 m 3 (ISO heaped) Weight : kg (73,635 lb.) Arm assembly Weight : kg (2,233 lb.) 500 mm (1 ft. 9 in.) 5600 mm (1 ft. in.) 670 mm (22 ft. 3 in.) Width : 790 mm (31 in.) 691 mm (27 in.) 75 mm (31 in.) Width : 60 mm (25 in.) 360 mm (12 ft. 1 in.) 3 mm (11 ft. 3 in.) Level cylinder Weight : 30 kg (,66 lb.) Bucket cylinders Weight : 060 kg (,951 lb.) mm (15 ft. 1 in.) Width : 60 mm (15 ft. 3 in.) Width : 2360 mm (7 ft. 9 in.) 60 mm (25 in.) 3 mm ( ft. in.) 565 mm (22 in.) 9 mm (16 ft. 1 in.) Boom assembly Weight : 0 00 kg (9,067 lb.) 690 mm (35 ft. 1 in.) s Weight : 19. kg (3 lb.) 2 2 mm (7 ft.) 17 mm (32 in.) Width : 50 mm (3 ft. 6 in.) Bucket dump cylinders Weight : 95 kg (2,172 lb.) 2 Width : 93 mm (3 ft. 3 in.) 3650 mm (12 ft.) Width : 1 mm (6 in.) 190 mm (6 ft. 6 in.) Width : mm (9 ft. 5 in.) 0 mm (17 in.) Boom cylinders Weight : 60 kg (15,16 lb.) mm (1 ft. 11 in.) Arm cylinders Weight : 690 kg (,30 lb.) 2 7 mm (15 ft. 6 in.) Width : 3 mm (17 in.) 75 mm (30 in.) 65 mm (27 in.) Width : 60 mm (25 in.) Width : 65 mm (3 in.) Clamp assembly Weight : 9 kg (9 lb.) 15 mm (7 in.) 2500 mm ( ft. 2 in.) Width : 0 mm ( in.) 16 17

10 LIFTING CAPACITIES MEMO A: Load radius B: Load point height C: Lifting capacity METRIC MEASURE Conditions Load point height Rating over-side or 360 degree Rating over-front Unit: 00 kg (1,000 lb.) Load radius At max. reach.0 m (26 ft. 3 in.).0 m (32 ft. in.) 12.0 m (39 ft. in.) 1.0 m (5 ft. 11 in.) 16.0 m (52 ft. 6 in.) meter 1.0 m EX (5 ft. 11 in.) BE-boom.1 m 12.0 m (33 ft. 2 in.) (39 ft. in.) BE-arm 5.0 m.0 m (16 ft. 5 in.) (32 ft. in.) Bucket.0 m ISO 751 (Heaped 1:1) : 3.0 m³ (26 ft. 3 in.) (.5 cu. yd.) 6.0 m Shoes 0 mm (19 ft. in.) (55 in.).0 m (13 ft. 1 in.) 2.0 m (6 ft. 7 in.) Ground Line 2.0 m ( 6 ft. 7 in.).0 m ( 13 ft. 1 in.) *91.6 (*1.9) *91.6 (*1.9) *99.5 (*219.) *7.2 (*172.) *99.5 (*219.) *7.2 (*172.) *36. (*0.2) *55.2 (*122) *90.1 (*199) *92.1 (*3) *.9 (*196) *79.9* (*176.1) *63. (*.7) *36. (*0.2) *55.2 (*122) *90.1 (*199) *92.1 (*3) *.9 (*196) *79.9* (*176.1) *63. (*.7) *33.5 (*73.9) *0.9 (*90.2) *39.2 (*6.) *2.0 (*92.6) *51.5 (*113.5) *69.9 (*15.1) *71. (*15.3) *69.2 (*152.6) *61. (*136.2) *7.1 (*3.) *33.5 (*73.9) *0.9 (*90.2) *39.2 (*6.) *2.0 (*92.6) *51.5 (*113.5) *69.9 (*15.1) *71. (*15.3) *69.2 (*152.6) *61. (*136.2) *7.1 (*3.) *39.5 (*7.1) *3.2 (*95.2) *. (*6.7) *56.5 (*12.6) *56. (*125.2) *53.2 (*117.3) *.2 (*97.) *39.5 (*7.1) *3.2 (*95.2) *. (*6.7) *56.5 (*12.6) *56. (*125.2) *53.2 (*117.3) *.2 (*97.) *3.1 (*75.2) *3.2 (*75.) *35.7 (*7.7) *3.7 (*5.3) *3.5 (*95.9).6 (*7.1) *7.1 (*3.) *. (*5.9) *19.9 (*3.9) *19. (*3.7) *.3 (*.) *21.5 (*7.) *23.6 (*52) *26.7 (*5.9) 17.9 m (5 ft. 9 in.) 1. m (61 ft. in.) 19.2 m (63 ft.) 19. m (63 ft. in.) 19. m (63 ft. in.) 19.0 m (62 ft. in.) 1. m (60 ft. in.) Notes: 1.Ratings are based on SAE J97. 2.Lifting capacity of the EX Series does not exceed 75% of tipping load with the machine on firm, level ground or 7% full hydraulic capacity. 3.The load point is a hook (not standard equipment) loaded on the back of the bucket..*indicates load limited by hydraulic capacity. 1 19

11 These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator s Manual for proper operation. Hitachi Construction Machinery Co., Ltd. KS-EN392 Digital only (1-07) (KA/KA,HT3)