SPECIFICATIONS. EX-7 series. HYDRAULIC EXCAVATOR EX2600-7B with Diesel Engine (Tier 4 Final) Engine Gross Power : Cummins : 1119 kw (1,500 hp) D&D'

Transcription

1 EX-7 series SPECIFICATIONS E D&D' F K G C I HYDRAULIC EXCAVATOR EX00-7B with Diesel Engine (Tier Final) Engine Gross Power : Cummins : 1119 kw (1,00 hp) EX00-7 with Diesel Engine (FCO) EX00-7 with Electric Motor Bucket Capacity H J A Distance between tumblers mm (0 ft. 1 in.) B Undercarriage length 770 mm ( ft. in.) C Counterweight clearance 130 mm (7 ft.) D Rear-end swing radius 90 mm (1 ft. in.) D' Rear-end length 390 mm (1 ft.) E Overall width of upperstructure 00 mm ( ft. in.) F Overall height of cab 70 mm (3 ft. 9 in.) G Min. ground clearance 770 mm (30 in.) H Track gauge 000 mm (1 ft. in.) I Track shoe width 00 mm (3 ft. 3 in.) J Undercarriage width 000 mm (19 ft. in.) K Track height 00 mm ( ft. 9 in.) MTU : 110 kw (1, hp) Operating Weight : Cummins : Loading Shovel : kg (70,997 lb.) Backhoe : kg (, lb.) MTU : Loading Shovel : kg (7,07 lb.) Backhoe : kg (70,997 lb.) Engine Gross Power : Cummins : 1119 kw (1,00 hp) MTU : 110 kw (1, hp) Operating Weight : Cummins : Loading Shovel : 000 kg (,793 lb.) Backhoe : 000 kg (,33 lb.) MTU : Loading Shovel : kg (73,0 lb.) Backhoe : 000 kg (,793 lb.) Power Output : 0 kw Operating Weight : Loading Shovel : 000 kg (9,97 lb.) Backhoe : 000 kg (, lb.) Loading Shovel Bucket : ISO Heaped : 1-1. m 3 ( cu. yd.) Backhoe Bucket : ISO Heaped : 17 m 3 (. cu. yd.) A B Illustrations show diesel engine type.

2 SPECIFICATIONS EX00-7 ENGINE Model... Cummins QSKTA0-CE Emission certification... U.S. EPA Tier Final Type... Water-cooled, -cycle, 1-cylinder turbo-charged and after-cooled, direct injection chamber-type diesel engine, urea SCR system, Fan clutch Rated power ISO 139, gross kw (1,00 hp) at 100 min -1 (rpm) Net... 9 kw (1,3 hp) at 100 min -1 (rpm) Maximum torque Nm (70 0 min -1 (rpm) Piston displacement... 0 L (13. gal.) Bore and stroke mm x 19 mm (.3 in. x.3 in.) Starting system... V electric motor Batteries... x 1 V, x 0 AH Model... Cummins QSKTA0-CE Emission certification... Fuel consumption optimized Type... Water-cooled, -cycle, 1-cylinder turbo-charged and after-cooled, direct injection chamber-type diesel engine, Fan clutch Rated power ISO 139, gross kw (1,00 hp) at 100 min -1 (rpm) Net... 9 kw (1,3 hp) at 100 min -1 (rpm) Maximum torque Nm (70 0 min -1 (rpm) Piston displacement... 0 L (13. gal.) Bore and stroke mm x 19 mm (.3 in. x.3 in.) Starting system... V electric motor Batteries... x 1 V, x 0 AH Model... MTU 1V 000 C1 Emission certification... U.S. EPA Tier Final Type... Water-cooled, -cycle, 1-cylinder -stage turbo-charged and aftercooled, direct injection chamber-type diesel engine, Miller cycle, Cooled EGR, Fan clutch Rated power ISO 139, gross kw (1, hp) at 100 min -1 (rpm) Net... 7 kw (1, hp) at 100 min -1 (rpm) Maximum torque Nm (70 19 min -1 (rpm) Piston displacement L (1.1 gal.) Bore and stroke mm x mm (.7 in. x.3 in.) Starting system... V electric motor Batteries... x 1 V, x 0 AH Model... MTU 1V 000 C13R Emission certification... Fuel consumption optimized Type... Water-cooled, -cycle, 1-cylinder turbo-charged and after-cooled, direct injection chamber-type diesel engine, Fan clutch Rated power ISO 139, gross kw (1, hp) at 100 min -1 (rpm) Net... 7 kw (1, hp) at 100 min -1 (rpm) Maximum torque Nm (70 19 min -1 (rpm) Piston displacement L (1.1 gal.) Bore and stroke mm x mm (.7 in. x.3 in.) Starting system... V electric motor Batteries... x 1 V, x 0 AH HYDRAULIC SYSTEM Hitachi's ETS (Electronic Total control System) can achieve maximum job efficiency by reducing fuel consumption and noise levels, while maximizing productivity through the optimization of engine-pump functions with excellent controllability increasing operator comfort. E-P Control (Computer-aided Engine-Pump Control system) Main pumps regulated by electric engine speed sensing control system. OHS (Optimum Hydraulic System) main pumps and 3 valves system enable both independent and combined operations of all functions. FPS (Fuel-saving Pump System) FPS minimizes energy loss with superior performance in fine control. Auto-idling system for saving fuel and reducing noise. Hydraulic drive cooling-fan system for oil cooler. Forced-lubrication and forced-cooling pump drive system. Regeneration circuit for boom down. Main pumps... variable-displacement, axial piston pumps for front attachment, travel and swing Max. oil flow... x 37 L/min. ( x 99.1 gal./min.), x L/min. ( x 11.3 gal./min.) Pilot pump... 1 gear pump Max. oil flow... L/min. (. gal./min.) Relief Valve Settings Implement circuit... Swing circuit... Travel circuit... Pilot circuit MPa (300 kgf/cm ) (, psi) 7. MPa (0 kgf/cm ) (3,973 psi) 9. MPa (300 kgf/cm ) (, psi) 3.9 MPa (0 kgf/cm ) ( psi) Hydraulic Cylinders High-strength piston rods and tubes adopted. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Bucket cylinders of loading shovel are provided with protector. Cylinder Dimensions Loading shovel Quantity Bore Rod diameter Boom 3 mm (1. in.) 30 mm (9.1 in.) Arm 1 0 mm (11 in.) mm (.3 in.) Bucket 0 mm (9. in.) 10 mm (7.1 in.) Dump 1 mm (. in.) 130 mm (.1 in.) Level 1 3 mm (1. in.) 30 mm (9.1 in.) Backhoe Quantity Bore Rod diameter Boom 3 mm (1. in.) 30 mm (9 in.) Arm 0 mm (11 in.) 00 mm (7.9 in.) Bucket 30 mm (9 in.) 170 mm (.7 in.) Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Quantity Full flow filter 3 µm High pressure strainer µm (In main & swing pump delivery line) Drain filter 1 µm (For all plunger type pumps & motors) By-pass filter 1 µm (In oil cooler by-pass line) Pilot filter 1 µm These filters are centralized in arrangement for facilitating maintenance.

3 CONTROLS Implement Levers Electric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. For loading shovel, pedals provided for opening/closing the bottom dump bucket. Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. UPPERSTRUCTURE Revolving Frame A deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. Sidewalks provide easy access to engine, hydraulic and electrical components. ISO-met stairs and handrails. Sidewalks and stairs are provided with skid-resistant plates Left Console Bucket Close Pedal (for Loading Shovel) Left Control Lever/Horn Switch 11 Bucket Open Pedal (for Loading Shovel) 3 Left Travel Pedal 1 Pilot Control Shut-Off Lever Left Travel Lever 13 Rear Console Right Travel Lever 1 Emergency Engine Stop Switch Right Travel Pedal 1 Engine Speed Control Dial 7 Right Control Lever/Horn Switch 1 Key Switch Right Console 17 Monitor Display 9 Operator s Seat 1 Diesel Engine 1 Battery Pump Drive Unit 17 Lubricator 3 Hydraulic Pump x 1 High Pressure Strainer x Hydraulic Oil Cooling Fan Motor 19 DEF Tank (Only for Cummins Tier F) Hydraulic Oil Cooler 0 Reserve Tank (Coolant) Engine Radiator 1 Air Filter x (Outer/Inner) 7 LTA Radiator Muffler Fuel Cooler 3 Fuel Filter 9 Pump Transmission Oil Cooler Cab Engine-Pump Bulkhead Ladder 11 Control Valve x 3 Folding Stairs 1 Swing Device x 7 Ladder 13 Center Joint Isolation SW Box 1 Hydraulic Tank 9 Emergency escape chute 1 Fuel Tank Swing Device high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake is manually releasable. Swing speed....1 min -1 (rpm) Operator's Cab The sturdy cab, with OPG top guard level ll (ISO), helps protect the operator from falling objects. Independent, pressurized, 1 00 mm wide, 10 mm high, roomy 7.m³ cab with tinted-glass windows features all-round visibility. Air-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instruments and control panel are within easy reach of the operator. 3 air conditioner system. Noise level... 7 db(a) in the cab; on max. engine speed under no-load condition Eye level height mm (0 ft. in.) 3

4 SPECIFICATIONS UNDERCARRIAGE Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Opposed double-type upper rollers for easy removal of mud. Track shoes of induction-hardened cast steel with triple grousers. Specially heat-treated connection pins. Hydraulic track adjuster provided with N gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser track shoes of induction-hardened cast steel. Shoe width mm (0 in.) Numbers of Rollers and Shoes (each side) Upper rollers... 3 Lower rollers... Track shoes SERVICE REFILL CAPACITIES Fuel tank Engine coolant Engine oil pan Pump drive Swing drive device ( units) Travel drive device ( units) Hydraulic system Hydraulic oil tank DEF tank LOADING SHOVEL ATTACHMENTS 300 L (1,00 gal.) 0 L (119 gal.) 90 L (77 gal.) 30 L ( gal.) x 0 L ( x gal.) x 137 L ( x 3 gal.) 3170 L (37 gal.) 130 L (39 gal.) 3 L (9 gal.) Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. Efficient, automatic level crowing achieved by one-lever control as the parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism). Auto-lubrication system for all pins is standard. Travel Device Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. -stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. Travel speeds km/h (0-1. mph) 0-1. km/h (0-1 mph) Maximum traction force kn/13 00 kgf (9,9 lbf.) Gradeability... % (30 degree) max. WEIGHTS AND GROUND PRESSURE Loading Shovel Equipped with 1 m 3 (19. cu. yd.) (ISO heaped) bottom dump bucket Shoe type Shoe width Operating weight Ground pressure 1 kpa FCO 000 kg (,793 lb.) (1.9 kgf/cm Cummins ) (7.3 psi) 19 kpa TF kg (70,997 lb.) (1.9 kgf/cm Triple grousers 00 mm (0 in.) ) (7. psi) 19 kpa FCO kg (73,0 lb.) (1.9 kgf/cm MTU ) (7. psi) 190 kpa TF kg (7,07 lb.) (1.9 kgf/cm ) (7. psi) Backhoe Equipped with.7-m ( ft. 7 in.) boom, 3.9-m (1 ft. in.) arm and 17-m 3 (. cu. yd.) (ISO heaped) bucket Shoe type Shoe width Operating weight Ground pressure 17 kpa (1.91 kgf/cm FCO 000 kg (,33 lb.) ) (7.1 psi) Cummins 17 kpa (1.91 kgf/cm TF kg (, lb.) ) (7.1 psi) Triple grousers 00 mm (0 in.) 1 kpa (1.9 kgf/cm FCO 000 kg (,793 lb.) ) (7.3 psi) MTU 19 kpa (1.9 kgf/cm TF kg (70,997 lb.) ) (7. psi)

5 SPECIFICATIONS EX00-7 WORKING RANGES BACKHOE ATTACHMENTS Feet Meter Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Bucket/arm joint pins are floating type. Replaceable thrust plates are provided with bucket/arm joint part. Autolubrication system for all pins is standard H WORKING RANGES G E Feet E' 0 t class 0 Meter F C A B D Bucket capacity ISO 7 (Heaped :1) A Min. digging distance B Min. level crowding distance C Level crowding distance D Max. digging reach E Max. cutting height E' Max. dumping height F Max. digging depth Working radius at max. G dumping height H Max. bucket opening width 0 Meter 0 Feet 1 m3 (19. cu. yd.) 30 mm (17 ft. in.) 790 mm ( ft. in.) 90 mm (1 ft. in.) 1 00 mm ( ft. in.) 1 0 mm (9 ft. 3 in.) 30 mm (3 ft.) 370 mm (1 ft. 3 in.) Arm crowding force on ground Bucket capacity ISO 7 (Heaped :1) A Min. digging distance B Min. level crowding distance C Level crowding distance D Max. digging reach E Max. cutting height E' Max. dumping height F Max. digging depth Working radius at max. G dumping height H Max. bucket opening width 10 mm (7 ft. 1 in.) 91 kn/93 00 kgf (0,37 lbf.) 1. m3 (1. cu. yd.) 00 mm (17 ft. 1 in.) 0 mm (7 ft.) 90 mm (1 ft. 3 in.) mm ( ft. 11 in.) 1 0 mm (0 ft.) 30 mm (3 ft.) 390 mm (13 ft.) mm ( ft. 9 in.) Arm crowding force on ground Bucket digging force 10 mm (7 ft. 1 in.) 907 kn/9 00 kgf (03,90 lbf.) 73 kn/9 000 kgf (19, lbf.) Bucket Capacity No.of Width ISO 7 teeth (Heaped :1) 1 3 * 1 m 390 mm (19. cu. yd.) (11 ft. 9 in.) 3 * 1. m 390 mm (1. cu. yd.) (11 ft. 9 in.) C D D' 1 Ground Line 0 t class F B B'. m ( ft. in.) G A' A mm ( ft. 9 in.) 93 kn/9 00 kgf (11,99 lbf.) Bucket digging force 1 E BE-boom length BE-arm length Bucket capacity ISO 71 (Heaped 1:1) A Max. digging reach A' Max. digging reach (on ground) B Max. digging depth Max. digging depth B' (. m ( ft. in.) level) C Max. cutting height D Max. dumping height D' Min. dumping height E Min. swing radius F Max. vertical wall G Min. level crowding distance Bucket digging force (ISO)* Arm crowd force (ISO)* 0 Meter 0 Feet.7 m ( ft. 7 in.) 3.9 m (1 ft. in.) 17 m3 (. cu. yd.) 1 00 mm ( ft. in.) 1 00 mm ( ft. in.) 0 mm (7 ft. 1 in.) 10 mm ( ft. 9 in.) 1 00 mm (1 ft. in.) 0 mm (33 ft. in.) 0 mm (13 ft. 11 in.) 7990 mm ( ft. 3 in.) 1 mm (13 ft. in.) 900 mm (1 ft. 1 in.) 30 kn/ 00 kgf (1,91 lbf.) 7 kn/0 000 kgf (17,7 lbf.) *This is the calculated value at the loading point (Cutting Edge) conforming to ISO. Bucket Capacity Weight Materials density kg (,7 lb.) kg (,3 lb.) kg/m3 *1 : Bottom dump type general purpose bucket * : Bottom dump type light duty bucket 100 (3,03 lb./cu. yd.) or less 100 kg/m3 (,97 lb./cu. yd.) or less ISO 71 (Heaped 1:1) Width With Without No.of teeth side side cutters cutters *3 17 m3 30 mm (. cu. yd.) (11 ft. 9 in.) - Weight Materials density 100 kg/m kg (3,03 lb./cu. yd.) (3,39 lb.) or less *3 : General purpose bucket

6 EQUIPMENT EX00-7 STANDARD EQUIPMENT ENGINE Auto-idle system Cartridge-type engine oil bypass filter Cartridge-type engine oil filter Cartridge-type fuel filter Emergency engine stop system Fan guard Heavy-duty type air cleaner with dust ejector Isolation-mounted engine Pre-lubrication system Radiator reserve tank Water filter A alternator HYDRAULIC SYSTEM Bypass filter Control valve with main relief valve Drain filter E-P control system Forced-lubrication and forced-cooling pump drive system FPS (Fuel-saving Pump System) Full-flow filter High-pressure strainer Hydraulic drive cooling-fan system OHS (Optimum Hydraulic System) Pilot filter Regeneration circuit for boom down function Suction filter CAB Adjustable reclining seat with air suspension Air conditioner with defroster Air horn with electric compressor Auto-tuning AM-FM radio with digital clock Evacuation hammer Floor mat Fluid-filled elastic mounts Footrest Front windshield washer Hot & cool-box Laminated glass windshield (Front) OPG top guard level ll (ISO) Parallel-link-type intermittent windshield wiper Pilot control shut-off lever Rearview mirror Reinforced/tinted (Green color) glass side and rear windows Roll screens Seat belt Storage spaces Trainer's seat Standard equipment may vary by country, so please consult your Hitachi dealer for details. MONITOR SYSTEMS Meters: Ambient temperature Clock DEF gauge (only for cummins TierF) Engine coolant temperature gauge Engine oil pressure gauge Engine oil temperature gauge Fuel gauge Grease gauge Hour meter Hydraulic oil temperature gauge Inclinometer Tachometer Pilot lamps (Green): Auto-Idle Auto lubrication DEF heater (only for cummins TierF) Fast filling Front attachment type Pilot control shut off lever Pre-lubrication Stairway position Travel mode Warning lamps (Red) and alarm buzzers: Alternator Auto-lubrication system Coolant level Coolant overheat DEF (only for Cummins TierF) Electric lever Emergency engine stop Engine oil pressure Engine over run Engine power (only for Cummins TierF) Engine speed (only for Cummins TierF) Engine stop Exhaust temperature Fuel temperature Grease level Hydraulic oil level Hydraulic oil overheat Manual lubrication Pre lubrication Pump transmission oil level Pump transmission oil overheat SCR cleaning (only for Cummins TierF) SCR system (only for Cummins TierF) SCR temperature (only for Cummins TierF) Stop valve Tension Warning lamp (Yellow): Air cleaner restriction Cabbed door open Cannot start engine Coolant level Coolant overheat DEF (only for Cummins TierF) DEF heater(only for Cummins TierF) Electrical equipment box Engine oil pressure Engine warning Exhaust temperature Fast filling Fuel temperature Grease level Pump contamination SCR cleaning (only for Cummins TierF) SCR system (only for Cummins TierF) SCR temperature (only for Cummins TierF) Stairway position DATA LOGGING SYSTEM DLU (Data-Logging Unit) continuously records performance of the engine and the hydraulic system. The record can be downloaded by PC. LIGHTS entrance LED light 3 maintenance light 9 working LED light UPPERSTRUCTURE Cab riser pressurizer Dual isolator switch Electronic cylinder stroke control system Emergency escape device Folding stairs with wide steps Hydraulic drive grease gun with hose reel Lockable machine doors Swing parking brake kg (,139 lb.) counterweight (Inc. bolt etc.) UNDERCARRIAGE Grease-less center joint Hydraulic track adjuster with N gas accumulator with relief valve Travel motion alarm device Travel parking brake Swing circle excess grease scraper Swing circle lubrication piping protection 00 mm (0 in.) triple grouser shoes MISCELLANEOUS Auto-lubrication system (Lincoln) for front-attachment pins, swing bearing Recirculation air filter for air conditioner Stairs and handrails (ISO compliant) Stop valve for transport and reassembly Ventilation air filter for air conditioner 1 V power terminal board FAST-FILLING SYSTEM Fast-filling system (Wiggins) for fuel, hydraulic oil, coolant, swing device oil, pump transmission oil, engine oil, and grease (Couplers not included). DEF (only for Cummins TireF) WIU (Wireless Interface Unit)**

7 EQUIPMENT OPTIONAL EQUIPMENT Optional equipment may vary by country, so please consult your Hitachi dealer for details. Aerial Angle Cold weather package* Communication system (Alternative)** GPRS communication system Satellite data transmitting system Fast-filling couplers High altitude application* Standard tool kit Travel motor guard Travel transmission guard Truck under cover color monitor cameras ; front and rear * Enginneered on request. ** The availability of the system depends on licensing regulations in each country. Please contact Hitachi dealer for more information. 7

8 SPECIFICATIONS EX00-7E ELECTRIC MOTOR High Voltage, Three Phase, Squirrel Cage Induction Motor, Totally Enclosed Air-to-Air-Cooled (TEAAC). Type... HITACHI TFOA-KK Rating Rated continuous output... 0 kw Voltage... AC V/0 Hz AC V/0 Hz Number of poles... Synchronous RPM min -1 /0 Hz 100 min -1 /0 Hz Rated current V Insulation class... F class B raise Space heater included. Thermo-guard (temperature detector) Starting condition... Reactor 0% tap HYDRAULIC SYSTEM OHS (Optimum Hydraulic System) main pumps and 3 valves system enable both independent and combined operations of all functions. Hydraulic drive cooling-fan system for oil cooler. Forced-lubrication and forced-cooling pump drive system. Regeneration circuit for boom down. Main pumps... variable-displacement, axial piston pumps for front attachment, travel and swing x 37 L/min. ( x 99.1 gal./min.), Max. oil flow... x L/min. ( x 11.3 gal./min.) Pilot pump... 1 gear pump Max. oil flow... L/min. (. gal./min.) Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Quantity Full flow filter 3 µm High pressure strainer µm (In main & swing pump delivery line) Drain filter 1 µm (For all plunger type pumps & motors) By-pass filter 1 µm (In oil cooler by-pass line) Pilot filter 1 µm These filters are centralized in arrangement for facilitating maintenance. CONTROLS Implement Levers Electric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. For loading shovel, pedals provided for opening/closing the bottom dump bucket. Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks Relief Valve Settings Implement circuit... Swing circuit... Travel circuit... Pilot circuit MPa (300 kgf/cm ) (, psi) 7. MPa (0 kgf/cm ) (3,973 psi) 9. MPa (300 kgf/cm ) (, psi) 3.9 MPa (0 kgf/cm ) ( psi) Hydraulic Cylinders High-strength piston rods and tubes adopted. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Bucket cylinders of loading shovel are provided with protector. Cylinder Dimensions Loading Shovel Quantity Bore Rod diameter Boom 3 mm (1. in.) 30 mm (9.1 in.) Arm 1 0 mm (11 in.) mm (.3 in.) Bucket 0 mm (9. in.) 10 mm (7.1 in.) Dump 1 mm (. in.) 130 mm (.1 in.) Level 1 3 mm (1. in.) 30 mm (9.1 in.) Left Console 9 Operator s Seat Left Control Lever/Horn Switch Bucket Close Pedal (for Loading Shovel) 3 Left Travel Pedal 11 Bucket Open Pedal (for Loading Shovel) Left Travel Lever 1 Pilot Control Shut-Off Lever Right Travel Lever 13 Rear Console Right Travel Pedal 1 Emergency Engine Stop Switch 7 Right Control Lever/Horn Switch 1 Key Switch Right Console 1 Monitor Display Backhoe Quantity Bore Rod diameter Boom 3 mm (1. in.) 30 mm (9 in.) Arm 0 mm (11 in.) 00 mm (7.9 in.) Bucket 30 mm (9 in.) 170 mm (.7 in.)

9 UPPERSTRUCTURE Revolving Frame A deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. Sidewalks provide easy access to motor, hydraulic and electrical components. ISO-met stairs and handrails. Sidewalks and stairs are provided with skid-resistant plates. UNDERCARRIAGE Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Opposed double-type upper rollers for easy removal of mud. Track shoes of induction-hardened cast steel with triple grousers. Specially heat-treated connection pins. Hydraulic track adjuster provided with N gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser track shoes of induction-hardened cast steel. Shoe width mm (0 in.) Numbers of Rollers and Shoes (each side) Upper rollers... 3 Lower rollers... Track shoes Travel Device Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. -stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. Travel speeds... High : 0-. km/h (0-1. mph) Low : 0-1. km/h (0-1 mph) Maximum traction force kn/13 00 kgf (9,9 lbf.) Gradeability... % (30 degree) max. 1 Main Motor 13 Swing Device x Coupler 1 Slip Ring 3 Pump Drive Unit 1 Center Joint Hydraulic Pump x 1 High-Pressure Strainer x Hydraulic Oil Cooling Fan Motor 17 Battery Hydraulic Oil Cooler x 1 Cab 7 Lubricator 19 Folding Stairs Pump Transmission Oil Cooler 0 Ladder 9 Motor-Pump Bulkhead 1 Cab Heater Unit Hydraulic Oil Tank Ladder 11 Cubicle 3 Isolation SW Box 1 Control Valve x 3 Emergency escape chute Swing Device high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of spring-set/hydraulicreleased disc type. This parking brake is manually releasable. Swing speed min -1 (rpm) Operator's Cab The sturdy cab, with OPG top guard level ll (ISO), helps protect the operator from falling objects. Independent, pressurized, 1 00 mm wide, 10 mm high, roomy 7.m³ cab with tinted-glass windows features all-round visibility. Air-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instruments and control panel are within easy reach of the operator. 3 air conditioner system. Eye level height mm (0 ft. in.) WEIGHTS AND GROUND PRESSURE Loading Shovel Equipped with 1 m 3 (19. cu. yd.) (ISO heaped) bottom dump bucket Shoe type Shoe width Operating weight Ground pressure Triple grousers 00 mm (0 in.) 000 kg (9,97 lb.) 1 kpa (1.9 kgf/cm ) (. psi) Backhoe Equipped with.7 m boom, 3.9 m arm, and 17.0 m 3 (ISO heaped) bucket Shoe type Shoe width Operating weight Ground pressure Triple grousers 00 mm 000 kg 1 kpa (1.7 kgf/cm ) (0 in.) (, lb.) (.7 psi) SERVICE REFILL CAPACITIES Pump drive Swing drive device ( units) Travel drive device ( units) Hydraulic system Hydraulic oil tank LOADING SHOVEL ATTACHMENTS 30 L ( gal.) x 0 L ( x gal.) x 137 L ( x 3 gal.) 3170 L (37 gal.) 130 L (39 gal.) Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. Efficient, automatic level crowing achieved by one-lever control as the parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism). Auto-lubrication system for all pins is standard. 9

10 SPECIFICATIONS EX00-7E WORKING RANGES Feet Bucket capacity ISO 7 (Heaped :1) 1 m 3 (19. cu. yd.) A Min. digging distance 30 mm (17 ft. in.) B Min. level crowding distance 790 mm ( ft. in.) C Level crowding distance 90 mm (1 ft. in.) D Max. digging reach 1 00 mm ( ft. in.) E Max. cutting height 1 0 mm (9 ft. 3 in.) E' Max. dumping height 30 mm (3 ft.) F Max. digging depth 370 mm (1 ft. 3 in.) G Working radius at max. dumping height mm ( ft. 9 in.) H Max. bucket opening width 10 mm (7 ft. 1 in.) Arm crowding force on ground 91 kn/93 00 kgf (0,37 lbf.) Bucket digging force 93 kn/9 00 kgf (11,99 lbf.) Bucket capacity ISO 7 (Heaped :1) 1. m 3 (1. cu. yd.) A Min. digging distance 00 mm (17 ft. 1 in.) B Min. level crowding distance 0 mm (7 ft.) C Level crowding distance 90 mm (1 ft. 3 in.) D Max. digging reach mm ( ft. 11 in.) E Max. cutting height 1 0 mm (0 ft.) E' Max. dumping height 30 mm (3 ft.) F Max. digging depth 390 mm (13 ft.) G Working radius at max. dumping height mm ( ft. 9 in.) H Max. bucket opening width 10 mm (7 ft. 1 in.) Arm crowding force on ground 907 kn/9 00 kgf (03,90 lbf.) Bucket digging force 73 kn/9 000 kgf (19, lbf.) Bucket Meter E F Capacity ISO 7 (Heaped :1) * 1 1 m 3 (19. cu. yd.) * 1. m 3 (1. cu. yd.) E' Width 0 t class Meter mm (11 ft. 9 in.) 390 mm (11 ft. 9 in.) No.of teeth *1 : Bottom dump type general purpose bucket * : Bottom dump type light duty bucket C H D G B Weight A 0 Ground Line Feet Materials density kg 100 kg/m 3 (,7 lb.) (3,03 lb./cu. yd.) or less kg 100 kg/m 3 (,3 lb.) (,97 lb./cu. yd.) or less BACKHOE ATTACHMENTS Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Bucket/arm joint pins are floating type. Replaceable thrust plates are provided with bucket/arm joint part. Autolubrication system for all pins is standard. WORKING RANGES Feet Meter C B D B' D' F 0 t class. m ( ft. in.) Ground Line BE-boom length.7 m ( ft. 7 in.) BE-arm length 3.9 m (1 ft. in.) Bucket capacity ISO 71 (Heaped 1:1) 17 m 3 (. cu. yd.) A Max. digging reach 1 00 mm ( ft. in.) A' Max. digging reach (on ground) 1 00 mm ( ft. in.) B Max. digging depth 0 mm (7 ft. 1 in.) B' Max. digging depth (. m ( ft. in.) level) 10 mm ( ft. 9 in.) C Max. cutting height 1 00 mm (1 ft. in.) D Max. dumping height 0 mm (33 ft. in.) D' Min. dumping height 0 mm (13 ft. 11 in.) E Min. swing radius 7990 mm ( ft. 3 in.) F Max. vertical wall 1 mm (13 ft. in.) G Min. level crowding distance 900 mm (1 ft. 1 in.) Bucket digging force (ISO)* 30 kn/ 00 kgf (1,91 lbf.) Arm crowd force (ISO)* 7 kn/0 000 kgf (17,7 lbf.) *This is the calculated value at the loading point (Cutting Edge) conforming to ISO. Bucket Capacity ISO 71 (Heaped 1:1) * 3 17 m 3 (. cu. yd.) A' A Meter With side cutters Width 30 mm (11 ft. 9 in.) *3 : General purpose bucket Without side cutters No.of teeth - E G Weight 1 00 kg (3,39 lb.) 0 Feet Materials density 100 kg/m 3 (3,03 lb./cu. yd.) or less

11 SPECIFICATIONS EX00-7E STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details. ELECTRIC MOTOR Space heater included Thermo-guard (Temperature detector) HYDRAULIC SYSTEM Bypass filter Control valve with main relief valve Drain filter Forced-lubrication and forced-cooling pump drive system Full-flow filter High-pressure strainer Hydraulic drive cooling-fan system OHS (Optimum Hydraulic System) Pilot filter Regeneration circuit for boom down function Suction filter CAB Adjustable reclining seat with air suspension Air conditioner with defroster Air horn with electric compressor Auto-tuning AM-FM radio with digital clock Evacuation hammer Floor mat Fluid-filled elastic mounts Footrest Front windshield washer Hot & cool-box Laminated glass windshield OPG top guard level ll (ISO) Parallel-link-type intermittent windshield wiper Pilot control shut-off lever Rearview mirror Reinforced/tinted (Green color) glass side and rear windows Roll screens Seat belt Storage spaces Trainer's seat MONITOR SYSTEMS Meters: Ambient temperature Clock Grease gauge Hour meter Hydraulic oil temperature gauge Inclinometer Main motor ammeter Main motor coil temperature gauge Main motor voltmeter Pilot lamps (Green): Auto lubrication Fast filling Front attachment type Main motor run Pilot control shut off lever Stairway position Travel mode Warning lamps (Red) and alarm buzzers: ACV power source AC00V power source Auto-lubrication system Battery charge Cubicle box Electric lever Emergency motor stop Grease level Hydraulic oil level Hydraulic oil overheat Main motor overheat Main motor start congestion Manual lubrication Pump transmission oil level Pump transmission oil overheat Stop valve Tension 3E relay Warning lamps (Yellow): Cabbed door open Cab heater Electrical equipment box Fast filling Grease level Pump contamination Stairway position DATA LOGGING SYSTEM DLU (Data-Logging Unit) continuously records performance of the hydraulic system. The record can be downloaded by PC. LIGHTS entrance LED light 3 maintenance light 9 working LED light UPPERSTRUCTURE Cab riser pressurizer Dual isolator switch Electronic cylinder stroke control system Emergency escape device Folding stairs with wide steps Hydraulic drive grease gun with hose reel Lockable machine doors Swing parking brake kg (7,97 lb.) counterweight (Inc. bolt etc.) UNDERCARRIAGE Grease-less center joint Hydraulic track adjuster with N gas accumulator with relief valve Swing circle excess grease scraper Swing circle lubrication piping protection Travel motion alarm device Travel parking brake 00 mm (0 in.) triple grouser shoes MISCELLANEOUS Auto-lubrication system (Lincoln) for front-attachment pins, swing bearing Recirculation air filter for air conditioner Stairs and handrails (ISO compliant) Stop valve for transport and reassembly Ventilation air filter for air conditioner 1 V power terminal board FAST-FILLING SYSTEM Fast-filling system (Wiggins) for hydraulic oil, swing device oil, pump transmission oil, and grease (Couplers not included). WIU (Wireless Interface Unit)** OPTIONAL EQUIPMENT Aerial Angle Cold weather package* Communication system (Alternative)** GPRS communication system Satellite data transmitting system Fast-filling couplers High altitude application* Optional equipment may vary by country, so please consult your Hitachi dealer for details. Standard tool kit Travel transmission guard Truck under cover color monitor cameras ; front and rear * Enginneered on request. ** The availability of the system depends on licensing regulations in each country. Please contact Hitachi dealer for more information. 11

12 TRANSPORTATION Illustrations show diesel engine type. Easily assembled owing to local assembling system requiring no welding. UPPERSTRUCTURE Cab assembly Weight : 100 kg (3,9 lb.) Cab bed Weight : 0 kg (,30 lb.) mm (9 ft. 3 in.) Urea tank Weight : 377 kg (31 lb.) Hose real Weight : kg (119 lb.) 0 mm ( in.) 190 mm ( ft. 3 in.) Width : mm (3 ft. in.) Width : 193 mm ( ft. in.) Escape device Weight : 19 kg (3 lb.) Weight :.1 kg (1 lb.) 0 mm (3 ft. in.) 11 mm ( ft. 11 in.) 0 mm ( in.) 3 mm ( in.) 13 mm ( ft. 0 in.) 3 mm (11 ft. 7 in.) 19 mm ( ft. 11 in.) assembly Weight : 70 kg (1 lb.) mm ( in.) Basic machine Weight : 3 00 kg (1,130 lb.) Width : mm ( in.) Only for Cummins TierF 1 mm ( ft. 3 in.) Width : 17 mm ( ft. in.) 7 mm (31 in.) 0 mm (3 in.) 93 mm (9 ft. 7 in.) 70 mm (9 ft. 1 in.) 99 mm (9 ft. in.) Width : 300 mm (11 ft. in.) assembly Weight : 0 kg (9 lb.) assembly Weight : 9 kg (0 lb.) mm ( in.) 97 mm (3 ft. 1 in.) 1 mm ( ft. 3 in.) 11 mm ( ft. 1 in.) 11 mm (3 ft. 9 in.) 111 mm (3 ft. in.) 1 mm (3 in.) 191 mm ( ft. 3 in.) 179 mm ( ft. in.) 1711 mm ( ft. 7 in.) 17 mm ( ft. in.) Fuel tank Weight : kg (,71 lb.) assembly Weight : 3 kg (7 lb.) 97 mm (9 ft. 7 in.) 00 mm ( ft. 7 in.) Width : 130 mm ( ft. 3 in.) 1 17 mm ( ft. in.) Width : 0 mm ( in.) 17 mm ( ft.) Fender assembly Weight : 11 kg (7 lb.) 1 mm ( ft. in.) mm ( ft. in.) mm ( ft. 9 in.) 3 mm (3 ft. in.) 1 mm ( ft. in.) 90 mm (19 in.) 1 mm ( ft. 3 in.) Fender assembly Weight : 0 kg ( lb.) Cover Weight :. kg ( lb.) 1 mm ( ft. in.) 1 mm (3 ft. 7 in.) 1973 mm ( ft. in.) Fender assembly Weight : 33 kg ( lb.) Weight : 17 kg (3 lb.) 70 mm (9 ft. 1 in.) assembly Weight : 7 kg (17 lb.) 3 mm ( in.)

13 3 mm (17 in.) 17 mm ( ft.) 19 mm ( ft. in.) 7 mm (19 in.) 997 mm (3 ft. 3 in.) 9 mm (11 in.) Weight : 33 kg (73 lb.) 10 mm ( ft. in.) 13 ( in.) 1 mm ( in.) 11 mm ( ft.) 10 mm ( ft. 11 in.) Fender assembly Weight : 9 kg (0 lb.) Weight : kg ( lb.) Weight : 93 kg (1,99 lb.) 11 mm ( ft.) assembly Weight : 31 kg ( lb.) 303 mm ( ft. 1 in.) Width : 19 mm ( ft. in.) 1 mm ( ft. 0 in.) 11 mm (3 ft. 9 in.) 1 mm ( in.) 900 mm (9 ft. in.) 1 mm (7 in.) 300 mm (1 in.) 3 mm (1 in.) 13 mm ( in.) Bracket Weight : 1. kg x (3 lb. x ) 3 mm (1 in.) mm ( in.) Bracket Weight : kg x ( lb. x ) assembly Weight : kg (309 lb.) 130 mm mm ( ft. 3 in.) ( in.) assembly Weight : 37 kg ( lb.) Ladder Weight : 0 kg ( lb.) 131 ( ft. in.) Width : 7 mm ( in.) Fender assembly Weight : 117 kg ( lb.) Weight : kg (1 lb.) 79 mm (3 in.) 3 mm ( in.) 10 mm ( ft. in.) mm (7 ft. in.) 1 mm ( in.) mm ( in.) 0 mm ( ft. 7 in.) 90 mm (3 ft. 1 in.) 91 mm (3 in.) Exhaust unit Weight : kg (,7 lb.) 13 mm ( ft. 1 in.) 1373 mm ( ft. in.) 90 mm (3 ft. 1 in.) Intake unit Weight : 30 kg (70 lb.) 10 ( ft. in.) Fender Weight : kg (31 lb.) Width : 1 mm ( in.) 193 mm ( ft. in.) Width : 000 mm ( ft. 7 in.) 70 mm (9 in.) 1 mm (3 ft. 7 in.) 309 mm (1 in.) Weight : 1.3 kg (91 lb.) 90 mm (3 ft. 1 in.) 1 mm (3 ft. 9 in.) 3 mm (17 in.) 7 mm ( in.) mm (9 in.) Weight : 7.1 kg (0 lb.) 0 mm (9 in.) mm (9 in.) 00 mm ( in.) Weight : 30 kg ( lb.) 3 mm (17 in.) Weight :. kg (3 lb.) 13

14 TRANSPORTATION Illustrations show diesel engine type. Easily assembled owing to local assembling system requiring no welding. UPPERSTRUCTURE bracket Weight :. kg ( lb.) 0 mm (3 in.) 137 mm ( ft. in.) Weight :. kg ( lb.) 07 mm ( 3 ft. in.) 07 mm ( 3 ft. in.) 07 mm ( 3 ft. in.) Weight :. kg (7 lb.) 13 mm ( ft. in.) 17 mm ( ft. 9 in.) (,9 lb.) Cummins TierF kg (,770 lb.) MTU FCO kg (,077 lb.) MTU TierF 0 kg (,7 lb.) Width : mm ( in.) 0 mm (0 ft. in.) Width : 00 mm ( ft. in.) 1 Weight : 30. kg (7 lb.) Cummins 309 mm ( ft. in.) MTU 3173 mm ( ft. in.) 0 mm ( in.) Width : 30 mm (9 in.) Width : 0 mm (1 in.) 3 mm (33 in.) mm (11 in.) 07 mm ( 3 ft. in.) 37 mm (33 in.) Width : 30 mm (9 in.) Engine unit Weight :. kg (11 lb.) Cummins FCO kg 17 mm ( ft. 3 in.) Width : 170 mm (7 in.) Weight : 1. kg (3 lb.) mm (3 ft. in.) 17 mm ( ft. 1 in.) Width : 30 mm (9 in.) Width : 30 mm (13 in.) Weight : 1.1 kg (31 lb.) 111 mm (3 ft. in.) 71 mm ( in.) 07 mm ( 3 ft. in.) 1 mm (3 ft. in.) Weight :. kg ( lb.) 17 mm ( ft. 1 in.) Weight : 1.7 kg (1 lb.) Width : 3 mm (1 in.) Weight : 17 kg (37 lb.) 7 mm (3 ft. in.) Width : 1 mm ( in.) Weight : 1.9 kg (33 lb.) 171 mm ( ft. in.) 113 mm (3 ft. 9 in.) 07 mm (3 ft. in.) Width : 30 mm (9 in.) 117 mm (3 ft. in.) Weight :. kg (3 lb.) Fuel tank side door Weight :.9 kg (7 lb.) mm (3 in.) 100 mm ( ft. 3 in.) mm ( in.) 19 mm (3 in.) Weight : 17. kg (39 lb.) 7 mm (3 ft. in.) Weight : 1.3 kg (3 lb.) 07 mm ( 3 ft. in.) Weight : 1. kg (3 lb.) 390 mm (1 in.) 390 mm (1 in.) Width : 0 mm ( in.) 07 mm ( 3 ft. in.) 7 mm ( in.) mm ( in.) 137 mm ( ft. in.) 39 mm (1 in.) 30 mm (1 in.) 00 mm (1 in.) 0 mm (17 in.) 19 mm ( in.) Weight : 3.1 kg (117 lb.) Width : 30 mm (1 in.) Oil tank side door Weight :. kg ( lb.) 9 mm ( in.) 100 mm ( ft. 3 in.) 39 mm (13 in.) 00 mm (31 in.) Weight : 3.1 kg (117 lb.) 07 mm (1 in.) Weight :. kg ( lb.) 117 mm (3 ft. 9 in.) Weight : 13. kg (30 lb.) Width : 0 mm ( in.)

15 Box Weight : 97 kg (,13 lb.) Weight :.7 kg ( lb.) Weight : 0.7 kg ( lb.) Beam Weight : 1 kg (1,3 lb.) 7 mm (3 in.) 170 mm ( ft. in.) 3 mm (3 ft. in.) 19 mm ( ft. 11 in.) 119 mm ( in.) 911 mm (3 in.) 3 mm (3 ft. in.) 9 mm (19 in.) 79 mm (3 in.) 7 mm (3 ft. in.) 73 mm (3 ft. in.) assembly Weight : 773 kg (1,70 lb.) Weight : 3.7 kg (77 lb.) Weight : 33. kg (7 lb.) 31 mm ( ft.) 3 mm (3 ft. in.) 3 mm (3 ft. in.) 31 mm ( ft. in.) Width : 10 mm (3 ft. 7 in.) 90 mm (9 ft. 7 in.) 70 mm ( ft. in.) Bolt assembly Weight : kg x (3 lb. x ) Weight : 3 kg x (7 lb. x ) Stopper Weight : 9 kg x (0 lb. x ) 3 mm (1 in.) 133 mm ( ft. in.) 7 mm (3 in.) 110 mm ( ft.) mm (3 in.) 0 mm (17 in.) 1 mm ( in.) Counterweight Weight : 9 00 kg (,9 lb.) Water tank assy Weight : 170 kg (37 lb.) mm (3 in.) mm ( ft. 7 in.) 9 mm ( ft.) Air duct assy Weight : 117 kg ( lb.) 0 mm (3 in.) Width : 1 mm (3 ft. in.) 19 mm ( ft. 0 in.) 9 mm (7 in.) 10 mm ( ft. in.) Width : mm ( ft. 3 in.) 1

16 TRANSPORTATION Illustrations show diesel engine type. Easily assembled owing to local assembling system requiring no welding. UNDERCARRIAGE Track frame Weight : 00 kg (9, lb.) Side frame Weight : kg x (3, lb. x ) 19 mm ( ft. in.) 1700 mm ( ft. 7 in.) 730 mm ( ft. in.) 330 mm (11 ft. 3 in.) Width : 00 mm (1 ft. 7 in.) Width : 10 mm (7 ft. 1 in.) Support (R) Weight : 7 kg (17 lb.) Support (L) Weight : 7 kg (17 lb.) mm ( ft. 7 in.) mm ( ft. 7 in.) Cover (R) Weight : 13 kg (30 lb.) Cover (L) Weight : 13 kg (30 lb.) 3 mm ( in.) 3 mm ( in.) 700 mm ( in.) Width : 0 mm ( in.) Width : 0 mm ( in.) 700 mm ( in.) 170 mm ( ft. 9 in.) 170 mm ( ft. 9 in.) Width : 3 mm (1 in.) Width : 3 mm (1 in.) Guard assembly (R) Weight : kg (3 lb.) Guard assembly (L) Weight : kg (3 lb.) Bracket (R)(L) Weight : 3 kg x (7 lb. x ) 3 mm (1 in.) 0 mm ( in.) 0 mm ( in.) 3 mm (1 in.) 1 mm ( in.) 139 mm ( in.) 339 mm (13 in.) 339 mm (13 in.) Width : 0 mm ( in.) 1

17 Cover Weight : 1. kg x (1 lb. x ) Cover Weight : 1. kg x (7 lb. x ) Cover Weight : 3.1 kg x (1 lb. x ) 3 mm (9 in.) Link assembly Weight : 300 kg x (, lb. x ) Link assembly Weight : 790 kg x (,11 lb. x ) 3 mm (11 in.) 3 mm (11 in.) 3 mm (9 in.) mm (3 ft. in.) 113 mm ( ft.) 13 mm ( ft. 3 in.) 3 mm (9 in.) Width : 17 mm ( in.) Width : 179 mm (7 in.) Width : 0 mm ( in.) mm (1 ft. 11 in.) mm (13 ft. in.) Width : 00 mm (3 ft. 3 in.) Width : 00 mm (3 ft. 3 in.) 17

18 TRANSPORTATION Illustrations show diesel engine type. Easily assembled owing to local assembling system requiring no welding. LOADING SHOVEL ATTACHMENTS Loader Weight : kg (,77 lb.) 1 mm (13 ft. in.) 30 mm ( ft. in.) Loader bucket 1 m3 (19. cu. yd.) Weight : kg (,7 lb.) 30 mm (11 ft. 3 in.) mm (3 ft. in.) Arm cylinder Weight : 0 kg (,93 lb.) Width : 00 mm ( ft. in.) 30 mm (11 ft. in.) Bucket cylinders Weight : 10 kg x (,01 lb. x ) Bucket cylinders Weight : 90 kg x (, lb. x ) 390 mm (13 ft. 1 in.) 7 mm (1 ft. in.) BACKHOE ATTACHMENTS Bucket assembly Capacity : 17 m3 (. cu. yd.) (ISO heaped) Weight : 1 00 kg (3,39 lb.) 70 mm (9 ft. in.) 371 mm (1 ft. in.) BE-boom assembly Weight : 00 kg (,013 lb.) 9139 mm (30 ft.) Width : 0 mm (7 ft. in.) 370 mm (1 ft. in.) Width : 300 mm (1 ft.) BE-arm assembly Weight : 1 0 kg (3,9 lb.) BE-boom assembly Weight : 3 kg x (,7 lb. x ) Width : 90 mm (19 in.) 1 mm ( ft. 3 in.) 70 mm ( in.) 70 mm (1 ft. 7 in.) 3 mm (17 ft. in.) Width : 10 mm ( ft. in.)

19 LIFTING CAPACITIES Notes: 1. Ratings are based on SAE J97.. Lifting capacity of the EX Series does not exceed 7% of tipping load with the machine on firm, level ground or 7% full hydraulic capacity. 3. The load point is a hook (not standard equipment) loaded on the back of the bucket.. *Indicates load limited by hydraulic capacity.. 0 m = Ground. A: Load radius B: Load point height C: Lifting capacity EX00-7 Rating over-front Rating over-side or 30 degrees Unit: 00 kg (1,000 lb.) Conditions Load point height Load radius m (19 ft. in.) m ( ft. 3 in.) m (3 ft. in.) 1 m (39 ft. in.) 1 m ( ft. 11 in.) At max. reach BE-boom.7 m ( ft. 7 in.) m (3 ft. in.) BE-arm 3.9 m (1 ft. in.) Bucket ISO71 (Heaped1:1) : m ( ft. 3 in.) 17 m 3 (. cu. yd.) Shoe 00 mm (0 in.) m (19 ft. in.) *33. (*7.1) *33. (*7.1) *3. (*1.) *7.9 (*1.) *3. (*71.) *3. (*1.) *7.9 (*1.) *3. (*71.) *1. (*0.) *.7 (*.9) *1. (*0.) *.7 (*.9) *.3 (*.7) *.1 (*.3) *.3 (*.7) *.3 (*.7) *.1 (*.3) *.3 (*.7) 1. m (0 ft. in.) 1.9 m ( ft. in.) 1.1 m ( ft. in.) m (13 ft. 1 in.) *1.1 (*11.7) *1.1 (*11.7) 3. (.7) *39. (*7.1) 7. (1.3) *31.7 (*9.9) *11.1 (*.) *11.1 (*.) 1.9 m ( ft. in.) m ( ft. 7 in.) 0.1 (1.) *1.1 (*11.7) 3.1 (79.) *1.3 (*91). (.) *3. (*71.9) *1.3 (*7.1) *1.3 (*7.1) 1. m (0 ft. in.) 0 (Ground).1 () *9.3 (*.7) 3. (7.1) *0.9 (*90.). (.) *31.1 (*.) *1. (*3) *1. (*3) 1. m (7 ft. 7 in.) - m (- ft. 7 in.) *33. (*73.) *33. (*73.) 7. (.9) *. (*.) 33.9 (7.7) *37. (*) *0.3 (*.) *0.3 (*.) - m (-13 ft. 1 in.) *. (*97.9) *. (*97.9) *39.3 (*.) *39.3 (*.) *3. (*.) *3. (*.) *7.7 (*1.1) *7.7 (*1.1) 19

20 These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator s Manual for proper operation. Hitachi Construction Machinery Co., Ltd. KS-EN39 Digital only (KA/SO,HT3) Printed in Japan