SAR COMPLIANCE REPORT

Transcription

1 Stanley Black & Decker, Inc. SAR COMPLIANCE REPORT Report Type: FCC SAR assessment report Model: MHL600 REPORT NUMBER: SHA-002 ISSUE DATE: Aug 30, 2018 DOCUMENT CONTROL NUMBER: TTRFFCCSAR-01_V Intertek

2 Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai , China Telephone: Report no.: SHA-002 Applicant: Manufacturer: Manufacturing site: Stanley Black & Decker, Inc. 400 Executive Blvd S, Southington, CT USA Stanley Black & Decker, Inc. 400 Executive Blvd S, Southington, CT USA AEC Lighting Solutions Co., Ltd. No.2548, Baoan Road, Jiading District, Shanghai, , China FCC ID: 2ANWF-MHL600LAMP SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: KDB D01 General RF Exposure Guidance v06 FCC Part2.1091, FCC Part FCC Part1.1307(b) PREPARED BY: REVIEWED BY: Project Engineer Teddy Yin Reviewer Daniel Zhao This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCSAR-01_V Intertek Page 2 of 8

3 Revision History Report No. Version Description Issued Date SHA-002 Rev. 01 Initial issue of report Aug 30, 2018 TTRFFCCSAR-01_V Intertek Page 3 of 8

4 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: Type/Model: Description of EUT: Rating: Category of EUT: Inspection LED Light MHL600 The EUT is a wireless device with 915MHz. We tested the channels: MHz and MHz and listed the worst data in this report. 4.2VDC; 2A Class B EUT type: Table top Floor standing Software Version: / Hardware Version: / Sample received date: May 18, 2018 Date of test: May 18~Jul 27, Technical Specification Frequency Range: MHz ~ MHz Support Standards: / Type of Modulation: FSK Channel Number: 8 Data Rate: / Channel Separation: 0.25 MHz Antenna Information: PCB antenna, 1.9dBi Peak gain TTRFFCCSAR-01_V Intertek Page 4 of 8

5 1.3 Description of Test Facility Name: Address: Intertek Testing Services Shanghai Building 86, No Qinzhou Road(North), Shanghai , P.R. China Telephone: Telefax: The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L0139 FCC Accredited Lab Designation Number: CN1175 IC Registration Lab Registration code No.: 2042B-1 VCCI Registration Lab Registration No.: R-4243, G-845, C-4723, T-2252 NVLAP Accreditation Lab NVLAP LAB CODE: A2LA Accreditation Lab Certificate Number: TTRFFCCSAR-01_V Intertek Page 5 of 8

6 2 SAR Assessment Test result: Pass 2.1 SAR Test Exclusion Limit 100 MHz 6 GHz and 50 mm TTRFFCCSAR-01_V Intertek Page 6 of 8

7 100 MHz 6 GHz and > 50 mm < 100 MHz and < 200 mm TTRFFCCSAR-01_V Intertek Page 7 of 8

8 2.2 Assessment Results The highest EIRP adjusted with tune-up tolerance is = -13.7dBm = 0.04mW < 16mW (Test Exclusion Thresholds of 900MHz at 5mm). Therefore, the SAR requirement is deemed to be satisfied without test. ******************************************* END ************************************ TTRFFCCSAR-01_V Intertek Page 8 of 8