2.4M Viking Swing Basket Swing
|
|
- Gervase Johnson
- 5 years ago
- Views:
Transcription
1 .M Viking Swing Basket Swing PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT 75x75x150 5 to Adult 1.5 Metres Approx 6Kg Approx 198Kg SPECIFICATION Solid steel components to EN 10087:1998 Steel plate to EN 1005-:00 Steel CHS to EN 1010 S355 Welding to EN ISO 131:011 Polyester powder paint to EN 1338:005 Standard fixings to BS 369:001 and BS 190:001 Non-standard fixings are anti-vandal and corrosion resistant INSTALLATION INSTRUCTIONS 1 Read instructions thoroughly before commencing installation of unit. Excavate foundations as shown in the foundation plan. 3 Assemble the swing as detailed in pages 3 to 6 using blocks as an installation aid. To locate the swing in the foundation holes requires men for 1 bay unit. 5 Check uprights are vertical and at correct angle, all top bars are horizontal and at correct height. 6 TIGHTEN THE M16 CROSS BAR/UPRIGHT FIXINGS TO THE CORRECT TORQUE SETTINGS, CENTRE PUNCH THREAD IN TWO PLACES TO DEFORM THREAD (SEE PAGE 7) AND FIT NUTCAP TO FIXINGS. 7 Backfill foundations with approx 0.95m³ concrete ( parts gravel/ parts sand/1 part cement). 8 Allow concrete to set for 8 hours. 9 Fit Basket Seat as shown. Note Note ENSURE ALL INSTALLATION AIDS ARE REMOVED BEFORE FIRST USE Page 1 of 17
2 Foundation Detail (Care must be taken in abnormal conditions) Foundation Centres FSL 650 Foundation Detail - Loose fill (Care must be taken in abnormal conditions) Foundation Centres FSL Concrete Brick Round off concrete 575 Bark Brick Concrete FSL = Finished Surface Level Page of 17
3 End Leg and Top Cross Bar Assembly Detail A Enlarged View Blocks used as an installation aid for assembly A 1. Page 3 of 17
4 End Leg and Top Cross Bar Assembly 6 Detail B Enlarged View 5 8 Blocks used as an installation aid for assembly B 1. Page of 17
5 End Leg and Top Cross Bar Assembly Detail C Enlarged View 5 7 Blocks used as an installation aid for assembly 8 C 1. Page 5 of 17
6 End Leg and Top Cross Bar Assembly Detail D Enlarged View Blocks used as an installation aid for assembly D 1. Page 6 of 17
7 Typical View X 1. Torque settings to all upright/cross bar M16 fittings Torque value for all M16 nuts and bolts = 05Nm X. Centre punch thread in two places as indicated by arrow 'X' on all M16 Bolts to deform threads 3 Page 7 of 17
8 Swing Assembly E 1000 Ref Underside of Cross Bar Tube FSL FSL = Finished Surface Level I/S Ref 63 Ctr Ref Detail E Enlarged View Page 8 of 17
9 - Basket Swing FSL mm Min 00mm FSL = Finished Surface Level Page 9 of 17
10 Minimum Space and Separation Upright Centres Page 10 of 17
11 Safety Surfacing Wetpour 15.5 Sq. Metres 60mm Wetpour 18.0 Linear Metres Wetpour Edging Page 11 of 17
12 Safety Surfacing Grass Mats (1500 x 1000mm) 13 off Total Page 1 of 17
13 Safety Surfacing Tiles (1000 x 1000mm) 16.5 Sq. Metres 55mm Thickness 18.0 Linear Metres of Tile Edging Upright Centres Page 13 of 17
14 Safety Surfacing Loose Fill 18.0 Sq metres of loose fill area 0.0 Linear area of loose fill edging Page 1 of 17
15 Pivot Mounting to Top Bar Chain Fixing to Pivot and Top Bar Chain Fixing to Basket Seat Page 15 of 17
16 POSITION OF LUGS IN RELATION TO DIRECTION OF SWING TRAVEL HOLES IN LUGS FACE SIDEWAYS DIRECTION OF SWING TRAVEL LUGS ANGLED OUTWARDS (ALIGNED WITH DIRECTION OF CHAINS) DIRECTION OF SWING TRAVEL Page 16 of 17
17 ITEM QTY PART NUMBER _Cap Parts List DESCRIPTION Viking Swing - Top Bar with Chains and Basket Seat DIA. 950 BASKET SEAT ASSY Viking Swing - Basket Cross Bar W.A. PIVOT HOUSING ASSEMBLY STRAIGHT CHAIN c/w SAFETY CHAIN STRAIGHT BASKET CHAIN THRUST WASHER M10 Nut Drilled for Grub Screw BELT SHACKLE TOP PIVOT SPINDLE BOTTOM PIVOT SPINDLE CUP WASHER CHAIN FITTING SPACER Black Poepplemann Cap OILITE PLAIN BUSH DIA 1/8" x 5/8" LG SELLOK PIN M1 Plain Washer M10 Washer M1 Binx Nut M1 x 110 HEX HD BOLT Mx6 Cone End Grub Screw.M Viking Swing End Leg M16 Nut Cap M16 Plain Washer M16 S/C SPRING WASHER M16 Binx Nut M16 x 130mm Hex HD. HT-10.9 ITEM 8 QTY PART NUMBER Parts List (Bark Fix) DESCRIPTION.M Viking Swing End Leg - (For Bark) For Bark Fix use items 8 instead of item COMPILED MC DATE: 1/01/15 REV ECN SIG. DATE: 0 17 MC 01/06/15 1 Minor MC Minor AB 3 Minor AB minor MC 5 Minor MC 6 minor AB 7 Minor MC 1/10/15 3/11/1511/1/1503/01/16 6/05/16 10/06/16 0/07/16 Page 17 of17
18 Product: Order No: DESPATCH LIST Viking Basket Swing (.M) Date of Issue19/05/015 Issue: A Sheet 1 of 1 Item Unit Qty Description Part No. Checked Items marked * to be fitted before despatch 1.M Viking Swing End Leg (5mm Thk) Basket Top Bar Assembly 1 Viking Swing - Basket Cross Bar W.A Chains and Basket Seat Assembly 6 1 Dia 950 Basket Seat Assembly Straight Basket Chain Straight Chain c/w Safety Chain Cup Washer Pivot Housing Assembly 10 Chain Fitting Spacer * Bottom Pivot Spindle * Pivot Housing Assembly * Top Pivot Spindle * Fixing pack Total No. of Items Picked By: Checked By: COMPILED REV BY: MC ECN No. 17 minor Minor Minor Minor DATE 19/05/015 15/1/015 07/03/016 0/07/016 17/08/016 DATE: 19/05/15 SIGN MC AB MC MC MC
19 Product: Order No: FIXINGS LIST Viking Basket Swing (.M) Date of Issue19/05/015 Issue: A Sheet 1 of 1 Item Unit Qty Description Part No. Checked 1 3 Chains and Basket Seat 5 6 Belt Shackle Dia 1/8" x 5/8" Lg Sellock Pin M x 6 Cone End Grub Screw M10 Nut Drilled for Grub Screw M10 Washer Black Poepplemann Cap M1 x 110 Hex Head Bolt M1 Plain Washer M1 Binx Nut Pivot Housing Assembly 16 8 Oilite Plain Bush * Thrust Washer * M16 x 130mm Hex Head HT M16 Washer M16 Spring Washer 1-05 M16 Binx Nut M16 Nut Cap Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV BY: MC ECN No. 17 Minor minor Minor minor Minor DATE 19/05/015 16/07/015 15/1/015 07/03/016 13/06/016 17/08/016 DATE: 19/05/15 SIGN MC MC AB MC AB MC
20 Product: Order No: DESPATCH LIST Viking Basket Swing (.M) Bark Fix Date of Issue19/05/015 Issue: A Sheet 1 of 1 Item Unit Qty Description Part No. Checked Items marked * to be fitted before despatch 1.M Viking Swing End Leg for Bark (5mm Thk) Basket Top Bar Assembly 1 Viking Swing - Basket Cross Bar W.A Chains and Basket Seat Assembly 6 1 Dia 950 Basket Seat Assembly Straight Basket Chain Straight Chain c/w Safety Chain Cup Washer Pivot Housing Assembly 10 Chain Fitting Spacer * Bottom Pivot Spindle * Pivot Housing Assembly * Top Pivot Spindle * Fixing pack Total No. of Items Picked By: Checked By: COMPILED REV BY: MC ECN No. 17 minor Minor Minor Minor DATE 19/05/015 15/1/015 07/03/016 0/07/016 17/08/016 DATE: 19/05/15 SIGN MC AB MC MC MC
21 Product: Order No: FIXINGS LIST Viking Basket Swing (.M) Bark Fix Date of Issue19/05/015 Issue: A Sheet 1 of 1 Item Unit Qty Description Part No. Checked 1 3 Chains and Basket Seat Assembly 5 6 Belt Shackle Dia 1/8" x 5/8" Lg Sellock Pin M x 6 Cone End Grub Screw M10 Nut Drilled for Grub Screw M10 Washer Black Poepplemann Cap M1 x 110 Hex Head Bolt M1 Plain Washer M1 Binx Nut Pivot Housing Assembly 16 8 Oilite Plain Bush * Thrust Washer * M16 x 130mm Hex Head HT M16 Washer M16 Spring Washer 1-05 M16 Binx Nut M16 Nut Cap Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV BY: MC ECN No. 17 Minor minor Minor minor Minor DATE 19/05/015 16/07/015 15/1/015 07/03/016 13/06/016 17/08/016 DATE: 19/05/15 SIGN MC MC AB MC AB MC
Parts Manual. Scraper Hitches PH:
Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch
More informationSWING SEAT. Doc No. F-01B. Item Description. Qty Specifications. Installation Instructions:
SWING SEAT Item Description Qty Specifications 1 Swing Seat Strap or Infant * 1 2 8mm S Hook * 2 Materials: 3 Swing Chain Senior or Junior * 2 Colour: Optional TO FIX TO OVERHEAD D Shackles M12 2 Finish:
More informationHoist Ring Forged Hoist Ring Machined Hoist Ring (Metric) Hoist Ring Swivel Shoulder Eyebolts JD Weld-On Alloy Lifting
Hoist Ring Forged........................... 94 Hoist Ring Machined........................ 95 Hoist Ring (Metric).......................... 96 Hoist Ring Swivel........................... 97 Shoulder
More informationSHEET 2: VERTICAL INSTALLATION
IMAGE OW1291 OW1293 OW1295 OW1297 AVATAR OW1301 OW1303 OW1305 OW1307 OW1311 OW1313 OW1315 OW1317 OW1331 OW1333 OW1335 OW1337 SHEET 2: VERTICAL INSTALLATION SHEET 3: HORIZONTAL INSTALLATION Drawing: 760883XX
More informationImportant Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts.
Kit Contents: DESCRIPTION QTY. DESCRIPTION QTY. 2 Shank Assembly 1 Support Tube Assembly 1 Side Tube - Short 2 1-1/4 Shank 1 Center Tube - Long 1 3/8-16 x 2.0 Carriage Bolt 2 5/16-18 x 2.25 Carriage Bolt
More informationThank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step*
PG 1 OF 9 PORTA-DOCK, INC. 74A ABL/APW 1056 & 44A FLB APW 1056 PORTA-LIFT Thank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step* STEP 1. Separate and group
More informationDivider Systems. Rear Tire Divider (RTD) Section 4. Model Years Model Years Model Years
Divider Systems Rear Tire Divider (RTD) Section 4 Model Years 1988 1993... 2-3 Model Years 1994 1996... 4-5 Model Years 1997 2010... 6-7 Model Years 2011 Present, Upper... 8-9 Model Years 2011 Present,
More informationE-trike Li Assembly Guide
PREPARATION 1. Read this assembly manual BEFORE commencing assembly. 2. Carefully remove all the components and packaged hardware from the shipping boxes. 3. Unpack the contents of the large double box
More informationRATCHET RELEASE SHACKLE
RATCHET RELEASE SHACKLE INNOVATIVE PILING EQUIPMENT HYDRAULIC PILING HAMMERS EURO RATCHET RELEASE SHACKLE FOR STEEL ERECTION OPERATORS INSTRUCTIONS & SPARE PARTS LIST EXCAVATOR MOUNTED VIBRATORS EXCAVATOR
More informationWELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
More informationFoundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN
Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual
More informationES-701 INSTRUCTIONS FOR USE
BIKE ES-701 MANUAL ES-701 INSTRUCTIONS FOR USE 1) The model ES-701 is designed to be used as a group cycle in fitness studios and health clubs. It has a fixed wheel driven flywheel and should only be used
More informationELECTRON PRO: ASSEMBLY GUIDE. Revision Valid for MY2017 Electron Pro
ELECTRON PRO: ASSEMBLY GUIDE Revision 1.0 10-20-2016 Valid for MY2017 Electron Pro ELECTRON PRO: Table of Contents 1. Tools Needed and First Aid Kit...3 2. Specifications...4 3. Configurations...5 4. Geometry...7
More informationParts & Installation Instructions SV & SV 2 8.5, 9.5 & 10.5 and SVLD 7.5 Snow Plow
Form -0 R September 0 Parts & Installation Instructions SV & SV.,. &. and SVLD. Snow Plow Item Part No. Part No. Part No. Part No. Part No. Part No. Qty. Description SVLD. SV. SV. SV. SV. SV. Moldboard
More informationRepair instructions. Pivot bushing replacement. XL-AS10001RM-en-DE Rev B
Repair instructions Pivot bushing replacement XL-AS10001RM-en-DE Rev B Table of contents Table of contents 1 General information... 3 1.1 Safety information...3 1.2 Legal information...4 1.3 Order and
More informationMeter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO01001 33 Pre 1994 39 32 31 21 Pre 1994 45 18 48 44 30 78 57 46 Note: Angled housing not shown. The Most Trusted
More informationCAISSON SHAFT SYSTEM
CAISSON SHAFT SYSTEM Installation Guide INSTALLATION GUIDE FOR DN2000 TO DN3660 UNITS PLATE JOINTING SYSTEM This guide is to be used for the Installation of CPM Group Ltd caisson shaft units which use
More informationMASTER TRUING STAND TS-3. Optional Dial indicator set with brackets Dial indicator bracket set only
MASTER TRUING STAND TS-3 3 2 1 3 8 9 4 10 7 6 5 12 13 Optional 1555-1 Dial indicator set with brackets 1556-1 Dial indicator bracket set only 49 11 16 14 15 48 32 31 37 38 20 19 17 18 34 39 21 36 22 33
More informationRocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide Date: April 7, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts
More informationRocky Mountain Element Technical Manual. Rev B
Rocky Mountain Element Technical Manual Rev B 1 Table of Contents Materials Required... 3 Suspension Pivot Torque Guide... 4 Small Parts Torque Guide... 5 Assembly Instructions... 6 1) Bearing Installation...
More information80 SERIES MOBILE-KARRIERS. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE 80 SERIES
OPERATOR S MANUAL FOR MORSE Model 80A and 80A-M for 55 gallon standard steel drums (22½ diameter) Model 80C for steel or fiber drums (21-23 diameter) Model 80i for 55 gallon steel drum (22-½ diameter).
More informationDetroit Speed, Inc. A-body Rear Coilover Conversion Kit A-body (Moser Rear Axle) P/N: , , , , ,
Detroit Speed, Inc. A-body Rear Coilover Conversion Kit 1964-1972 A-body (Moser Rear Axle) P/N: 042411, 042412, 042413, 042417, 042418, 042419 The Detroit Speed, Inc. A-body Rear Coilover Conversion Kit
More informationUniversal Anchoring Adapter For Mercedes
Universal Anchoring Adapter For Mercedes Anchoring Pin & Tube Set (For Most Mercedes Models) Users Manual 006 Chief Automotive Technologies, Inc. Chief s Limited One-Year Warranty & Liability CHIEF'S
More informationPIVOT SHUTTLE Chain Ring Replacement Maintenance Procedure
PIVOT SHUTTLE Chain Ring Replacement Maintenance Procedure This maintenance guide provides detailed instructions to replace the chain ring of the Shimano Steps E8000 E-bike system should something malfuction
More informationAssembly Guide ST200 FUNCTIONAL TRAINER
Assembly Guide ST200 FUNCTIONAL TRAINER Assembly Guide ST200 FUNCTIONAL TRAINER To avoid possible damage to this Functional Trainer, please follow these assembly steps in the correct order. Before proceeding,
More informationSERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
More informationProduct Catalogue. Version 8.0. GSection. Hendrickson Suspension
Product Catalogue GSection Version 8.0 Hendrickson Suspension Section G Air Suspension Components Hendrickson HTE Suspension G:28 PRODUCT CATALOGUE 8.0 Hendrickson HTE Suspension - Part List Part No. Item
More informationOperator s/parts Manual
Operator s/parts Manual 24 & 30 Folding No-Till Drill Harrow Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read the Operator s manual entirely. When you see this symbol, the subsequent instructions
More informationSEries 29 Hydrant valves installation, operation & maintenance manual
Instruction for use Thank you for selecting an AVK product. With correct use, it will give long and reliable service. This manual has been prepared to assist you install, operate and maintain the valve
More informationRocky Mountain Instinct / Pipeline Frame Assembly Guide. Date: March 31, 2017
Rocky Mountain Instinct / Pipeline Frame Assembly Guide Date: March 31, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts Needed...
More informationMedium Voltage Switchgear. Installation Manual for Pressure Relief Ducts
Uniswitch Medium Voltage Switchgear Installation Manual for Pressure Relief Ducts TABLE OF CONTENTS 1 Summary... 1 2 Transportation and storage... 2 2.1 Condition on delivery... 2 2.2 Unpacking at installation
More informationW A L D M A N U F A C T U R I N G C O M P A N Y, I N C.
A Axle & Nut Assemblies 22 Axle Sets 22 Axles 22 B Bars, Handle 12,13 Basket Fittings 10 Baskets 7,8,9,10 Bolts, Binder 15 Bolts, Expander 15 Bolts, Fork Crown 17 Bolts & Nuts, Assorted 21 Bolts & Nuts,
More informationELECTRON PRO 245A: ASSEMBLY GUIDE. Revision Valid for MY2017 Electron Pro
ELECTRON PRO 245A: ASSEMBLY GUIDE Revision 2.0 04-19-2017 Valid for MY2017 Electron Pro ELECTRON PRO 245A: Table of Contents 1. Tools Needed and First Aid Kit...3 2. Specifications...4 3. Configurations...5
More informationInstallation Instructions - Electric Steel Drive Systems for Arm Sets to ,
Installation Instructions - Electric Steel Drive Systems for Arm Sets to 22 208-025, 209-025 NB /0/ 607-0029 404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 Step.
More informationMeter, PD Series, E3 S1 and E4 S to Present Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 S1 and E4 S1 2005 to Present Parts List Bulletin PO01002 9 35 3 39 53 55 57 56 52 54 26 32 37 25 68 48 38 The Most Trusted Name In Measurement 5 31 7 44 42 16
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationCHAINLESS ANCHORING SYSTEM USER MANUAL
CHAINLESS ANCHORING SYSTEM USER MANUAL Introduction..................................................... 1 Setting up the Chainless Anchoring System............................ 4 Set up Procedure............................................
More informationReplaces Lesco 300 & 500 Parts Cutting Unit
Replaces Lesco 300 & 500 Parts 3A 11 10 10 11 17 3 1 15 2 13 1 20 1 20 1 21 2 2 22 1B 30 1A 10 14 31 25 23 24 10 4 27 23 25 26 14 24 10 13A 5 5A 4A 16 0 R&R Reels Available, Lifetime Guaranteed 1 R50271
More informationAssembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03
Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag plates
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Types A & B
Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)
More informationInstalling a Christie One Mount/Christie One Mount Plus
Installing a Christie One Mount/Christie One Mount Plus This document provides instructions for installing the Christie One Mount or Christie One Mount Plus and optional accessories to mount Christie projectors
More information3190A NEO-ANGLE DOOR INSTALLATION INSTRUCTIONS. Series MODEL NO
NEO-ANGLE DOOR INSTALLATION INSTRUCTIONS Series 30A Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. The Exploded Diagram
More informationOUTDOOR BACKSTOP WITH 5'-0" EXTENSION
INSTALLATION INSTRUCTIONS OUTDOOR BACKSTOP WITH 5'-0" EXTENSION NoUU. 00175- _ READ ALL INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING TO INSTALL THIS EQUIPMENT. INSTALLATION / ASSEMBLY OF THIS EQUIPMENT MUST
More information830 SureFlo Soap Systems Installation Instructions. Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19
830 SureFlo Soap Systems Installation Instructions Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19 INSTALLATION INSTRUCTIONS SureFlo SOAP DISPENSING SYSTEM FOAM VERSION ONLY B-830 Foam
More informationGP100 SERIES ENDURANCE PLAYGROUND SYSTEMS. Installation and Assembly Instructions. Gared Holdings, LLC 9200 E. 146th St. Noblesville, IN 46060
GP100 SERIES 1 OF 16 401754712 B Table of Contents Section Page No. Introduction 2 Cautions and Warnings 3 Parts Checklist 4 Post & Extension Arm Installation 7 Acrylic, Glass, and Perforated Steel Backboard
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJL 250 body. Reinforced lug for DN200 :
Reinforced lug for DN200 : Size : Ends : Min Temperature : Max Temperature : DN 50 to 200 mm Between flanges ISO PN10/16 ( PN10 for DN200 ) - 10 C + 110 C Max Pressure : 10 Bars Specifications : Long neck
More informationTR-AUGER. Section C INDEX BOOT / HOPPER
INDEX Section C TR-AUGER BOOT / HOPPER Description Page TR80 / TR100 x 51' basic auger... C2-3 TR80 / TR100 x 61' basic auger... C4-5 TR80 / TR100 x 71' basic auger... C6-7 TR Swing hopper... C8-9 TR-Boot
More informationMID-CUT AND FRONT CUT UNITS
MID-CUT AND FRONT CUT UNITS Instructional / Parts Manual Part Number: January 00 08 ( 0 & 0 ) & Adapter Kits ( 07, 08, 09, 060, 06 & 06) Table of Contents PROWLER GRASS CATCHER TWO PACKAGED ITEMS LIST
More informationINSTALLATION INSTRUCTIONS: SCTB1600
INSTALLATION INSTRUCTIONS: SCTB1600 DESCRIPTION: BOLLARD, 1600 DWG: INSTALL_SCTB1600 REV: M01 BASE TYPE B1 DIRECT BURIAL - PG. 6: BOLLARD IS PERMANENT, IT IS DIRECTLY BURIED INTO CONCRETE BASE TYPE B2
More informationWater Rider 3 Pool Bike
Water Rider 3 Pool Bike PAGE DESCRIPTION 3 EXPLODED VIEW 3 TOOLS 4 PARTS LIST 5-6 INSTALLATION 7 USING THE POOL BIKE 8 POOL BIKE MAINTENANCE 9 WARRANTY 2 Exploded View Tools Note: The use of these tools
More informationAssembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03
Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationBRONZE BUSHING REPLACEMENT PROCEDURE DN345 & NL450C
1 BRONZE BUSHING REPLACEMENT PROCEDURE V.2 12/3/2014 DN345 & NL450C 2 Safety Instructions Removing Walking Beams 3 1. Position spreader on a flat concrete surface capable of supporting weight of spreader
More informationC-M Precast Traffic Islands Index
C-M Precast Traffic Islands Index Selecting Left or Right Hand Islands Product Range Splitter Islands Single Splitter Islands 1072 Chicane Splitter Islands 1075 Pedestrian Refuge 1082 Tweed Pedestrian
More informationFlagpole Selection Guide
Selection Guide Selecting the right pole for your project To chose the right pole you should consider both flagpole Style and Height. The common styles are outlined on this page for easy comparison. The
More informationReplaces Lesco 300 & 500 Parts
Replaces Lesco 300 & 500 Parts ItemNo R&R PartNo PartNo Description Req. Qty Price R&R Reels Available, Lifetime Guaranteed 1 R502871 020800 R&R Reel, 9 Blade, Fits 300 1 32,100 1 R502871H R&R Only R&R
More informationEZ-Mount 4 Spring Enclosed System to 22 (Low & High Mount Applications) Installation Instructions
501-1768 (With Wire) 501-1769 (No Wire) 501-1766 (With Wire) 501-1767 (No Wire) 607-015 WLH 06/20/18 TABLE OF CONTENTS ***Assembly*** ***Parts*** Pivot Points and Mounting Locations (Low Mount)... 1 High
More informationBackboard and Rim Owners Manual
REQUIRED TOOLS AND MATERIALS: Two (2) Capable Adults Tape Measure Backboard and Rim Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Step Ladder - 8ft. (2.4
More information7 FORAGE AND HARVESTING
Sickle Assemblies 4560R2 Sickle section, 3" x 3-1/4" underserrated. X-Hvy gauge, Chrome finish. Uses rivet RIV101. 142669H L. FT, SECTION NUMBER 141198, TYPE UND 14260 STEEL HEAT THREADED HEADS. Section
More informationInstallation, operation & maintenance manual - original version
Installation, operation & maintenance manual - original version AVK gate valves for water and wastewater Series 01, 02, 06, 12, 15, 18, 20, 26, 32, 33, 36, 38, 50, 55 and 636 COPYRIGHT AVK GROUP A/S 2018
More informationRZR 900 Hitch Mount Plate
RZR 900 Hitch Mount Plate Polaris RZR 900 2015+ Part #: 5801119 Rev. 031017 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768 E-mail: sales-rtpro@sporttruckusainc.com SAFETY WARNING RT Pro
More information! CAUTION! ! WARNING! General Information
Great Plains Mfg., Inc. Installation Instructions Used with: 2SF24, 24-Foot Two-Section Drill General Information Two-Section, Hydraulic Folding Marker 2SF30, 30-Foot Two-Section Drill 2SBM30, 30-Foot
More informationBASIN AND WALL MIXER INSTALLATION INSTRUCTIONS
BASIN AND WALL MIXER INSTALLATION INSTRUCTIONS IMPORTANT INFORMATION IMPORTANT All tapware and showers to be installed by a licensed plumber and to Australian Standards. Fit tempering and pressure reduction
More informationInstallation Instructions - Electric Aluminum Drive Systems for Arm Sets to 22 Electric Arm Systems , ,
Installation Instructions - Electric Aluminum Drive Systems for Arm Sets to 22 Electric Arm Systems - 204-025, 206-025, 22-025 NB /0/ 607-0020 404 N. Marshall Ave. El Cajon CA. 92020 For technical support
More informationVac Bagger Wheelhorse 42 and 48 Mowers for Classic Garden Tractors
Form No. -80 Vac Bagger Wheelhorse and 8 Mowers for Classic Garden Tractors Model No. 790 000000 & Up Operator s Manual Domestic English (EN) Contents Page Introduction................................
More information1. General Safety Information. Silvio V2.2 Assembly Instructions Assembly. Adjust to the rider.
Silvio V. Assembly Instructions support@cruzbike.com. General Safety Information WARNING to avoid serious injuries:. If you are unsure about fitting, testing and adjusting brakes or gearing on a bicycle,
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationRev B, 03/2012 Page 1 of 8
Rev B, 03/2012 Page 1 of 8 www.topendwheelchair.com (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Force X: Fork Assembly 1 (Page 3) 1 Fork Weldment, Force X 2 1166337 1 Brake Caliper Set (Front & Rear)
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationBR-2444 ROWING MACHINE
BR-2444 ROWING MACHINE Important Safety Information Please keep this manual in a safe place for reference. 1. It is important to read this entire manual before assembling and using the equipment. Safe
More informationRev C Force 2 Parts Book Page 1 of 7 Top End
1181378 Rev C.2016.03.14 Force 2 Parts Book Page 1 of 7 Force 2: Fork Assembly Date: Customer: Ship to: PER BIKE DESCRIPTION 1 1166391 1 Fork, Force 2 (incl: fork, 4 bolts) -Serial# Required- Red Blue
More informationInstallation and Training Manual
AirForce1 Tower Kit Installation and Training Manual FuturEnergy Limited Ettington Park Business Centre Stratford upon Avon CV37 8BT +44 (0)1789 451070 Table of Contents Safety Notes... 3 Parts Supplied
More informationDH-9downhill nine. TECHNICAL guide. Table of Contents. Assembly Instructions. Exploded Views
DH-9downhill nine TECHNICAL guide Table of Contents Assembly Instructions Exploded Views 2 5 TOOLS of thetrade yeti style > DEAD BLOW HAMMER > ADJUSTABLE WRENCH > 5MM T HANDLE > 4MM T HANDLE > 6MM ALLEN
More informationB-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
More informationGurney Flap for WRX and STI w/low Profile Trunk Spoiler
Gurney Flap for 2015+ WRX and STI w/low Profile Trunk Spoiler 2017-12-05 Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Type C
Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount
More informationMini-Mac Applicator Specification Sheet Part No (Replaces )
Mini-Mac Applicator Specification Sheet Part No. 63801-2900 (Replaces 19814-1000) FEATURES Œ Quick set-up time; plus the crimp height, track and feed adjustments can be preset in applicator Œ Conductor
More informationRSL TOWER KITS RSLL-01-A1 RSL GENERAL NOTES
SECTION P/N R10H R9H R8H R7 R6 R5 R4 R3 R R1 LENGTH RSLL-1 RSLL- RSLL-3 RSLL-4 RSLL-5 RSLL-6 RSLL-7 RSLL-8 U 3/4" X 1/4" (U 70 X 6.4 mm) RSLL-9 U 3/4" X 1/4" (U 70 X 6.4 mm) RSLL-10 U 3/4" X 1/4" (U 70
More informationAnchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
More informationTroyer s Gourd Rack 8 unit F R H O P
B E A D I M-N L Vertical Parts F R H O P Horizontal Parts C G J Updated 11/16 Parts List A: Top of Pole B: Bottom of Pole C: 48 Ground Stake D: Top Perch rods 48 long E: Hub F: Rope Winder w/ attached
More information600 / 600FC OWNER'S MANUAL
PROGRESSION 600 / 600FC OWNER'S MANUAL Issue 2 / Version E - Dec. 10, 1997 Copyright 1997 GAMMA Sports - All Rights Reserved PROGRESSION 600 / 600FC OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY
More informationPRODUCT CARD WALL MOUNTED FIXED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,00 TO 2,25 M
PRODUCT CARD WALL MOUNTED FIXED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,00 TO 2,25 M I. List of components... 2 II. Complimentary products... 2 III. Product description... 3 IV. Product Purpose... 3
More informationDetroit Speed, Inc. Rear Coilover Conversion Kit Camaro/Firebird P/N: &
Detroit Speed, Inc. Rear Coilover Conversion Kit 1982-02 Camaro/Firebird P/N: 042440 & 042441 The Detroit Speed Inc., Rear Coilover Conversion Kit allows the latest in coilover spring/shock technology
More informationTECH SHEET ORANGE PIVOT TOOL INSTRUCTIONS
page 1 ORANGE PIVOT TOOL INSTRUCTIONS This is a guide of how to change the pivot bearings on an Orange frame with a bore style pivot axle. 4 8 Bore Type Pivot Axle Horiz-Hold Type Pivot Axle Please read
More informationINSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
More informationSafety System Installation Guide for ARE Wind Poles
Safety System Installation Guide for ARE Wind Poles V. 1 May 2011 ** Climbing pegs and ladder should be installed before the pole is erected.** A. Install climbing pegs Install climbing pegs (bolt set)
More information60 PRO FINISH CUT OWNER S MANUAL. With Assembly Instructions For Model: Pro60K KUNZ ENGINEERING, INC. / MENDOTA, IL / PH (815) /08
60 PRO FINISH CUT OWNER S MANUAL With Assembly Instructions For Model: Pro60K KUNZ ENGINEERING, INC. / MENDOTA, IL 61342 / PH (815) 539-6954 1/08 ASSEMBLY INSTRUCTIONS READ THE COMPLETE ASSEMBLY INSTRUCTIONS
More informationOPERATOR S MANUAL SPREADER. CSS, VNQ [For Combine Harvester AW82V] Original instructions
OPERATOR S MANUAL SPREADER CSS, VNQ [For Combine Harvester AW82V] en Original instructions Introduction Introduction Please read this operator s manual before using your spreader. We would first like to
More informationSKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST
SKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST AIRGLAS MANUAL NO. L 44000-105 (Rev C) FOR SKI SERIAL NO. S 1 THRU 1000 AIRGLAS MODEL L 44000-11 FSN 1630-912-3166
More informationWellhead Mast. Installation and Operation Guide. Nanometrics Inc. Kanata, Ontario Canada
Installation and Operation Guide Nanometrics Inc. Kanata, Ontario Canada 2001 2005 Nanometrics Inc. All Rights Reserved. Installation and Operation Guide The information in this document has been carefully
More informationTHOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
More informationPRODUCT CARD WALL MOUNTED SIDE FOLDED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,2 TO 2,45 M
PRODUCT CARD WALL MOUNTED SIDE FOLDED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,2 TO 2,45 M I. List of components... 2 II. Complimentary products... 2 III. Product description... 3 IV. Product Purpose...
More informationFinal Assembly Instructions Bikes with Threaded Headsets
Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our
More informationInstallation. 48in, 54in, or 60in Recycler Kit TimeCutter or TimeCutter HD Riding Mower WARNING. Loose Parts. Installation Instructions
48in, 54in, or 60in Recycler Kit TimeCutter or TimeCutter HD Riding Mower Model No. 36-7488 Model No. 36-7489 Model No. 36-7490 Form No. 346-558 Rev A Installation Instructions WARNING CALIFORNIA Proposition
More informationADJUSTABLE CAMBER PLATE KIT INSTALLATION INSTRUCTIONS PART NUMBER D A
ADJUSTABLE CAMBER PLATE KIT INSTALLATION INSTRUCTIONS PART NUMBER D160-0007A APPLICATION: 2014-2016 228i Coupe + xdrive (F22) 2015-2016 228i Convertible+ xdrive (F23) 2017 230i Coupe + xdrive (F22) 2017
More informationSunset Swings By Health in Motion, LLC
Sunset Swings By Health in Motion, LLC Model 421 Lounge Swing Assembly and Operation Manual Record Serial Number Here www.sunsetswings.com by Health In Motion, LLC. 1/30/2013 Caution: READ! VERY IMPORTANT
More informationa division of Enviro Safety Products
www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Chassis 3 4 5 3 4 6 7 8 5 0 0 6 8 0 7 4 3 5 6 7 E 7e www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Page
More informationInstallation Instructions - Super Six Electric Arm Kits with Underbody Pivots , , ,
Installation Instructions - Super Six Electric Arm Kits with Underbody Pivots 501-2112, 501-2113, 501-2114, 501-2115 GR 0/23/12 60-0135 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call
More information310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment
OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility
More informationTrilogy Theory of Operation
INSTALLATION & OVERVIEW... 2 Load Height... 2 Approach Angle... 2 Footprint... 3 Protrusion... 3 Mounting the... 4 General Torque Specs... 4 OPERATION OF BIKE RACK... 5 Loading Bikes... 5 Unloading Bikes...
More information