SPARE PARTS WORKBOOK

SPARE PARTS WORKBOOK

SPARE PARTS WORKBOOK Hull Parts - Bow Area 7 8 6 0 Allen Hatch Inch: Sealing Ring A8 Allen Hatch Inch: Black A7BLACK Pozzi pan screw 6 x / FIX-S6-P0 Allen Hatch Inch: Black A7BLACK SCK CSK M/SCREW M6 X

SPARE PARTS WORKBOOK

SPARE PARTS WORKBOOK Hull Parts - Bow Area 0 0 RS Feva Foredeck FEV-HF-00 Pozzi pan screw x / FIX-S-P0 Washer M 'A' FIX-W-00 00mm Black Dacron Patch ZDP00 Allen Hatch Inch: Sealing Ring A Pozzi pan screw

SPARE PARTS WORKBOOK

SPARE PARTS WORKBOOK Hull Parts - ASY Pole & Tack Bar Area 0 0 STF Marine x0mm Clevis Pins and Split Rings ST-O00 RS Quest ASY Spinnaker Pole QUE-SP-00 Gottifredi Maffioli Evolution Race mm: Black KKD0BLK

Pico rigging manual 2007.doc Page 1 of 28

Pico rigging manual 2007.doc Page 1 of 28 Pico Rigging Instructions The Pico rigging instructions are a guide to rigging your boat. Due to production supplies certain parts may be slightly modified from

RS Sailing Pricelist Europe 2019

RS Tera Sport Complete boat 2.992,47 RS Tera Pro Complete boat 3.194,24 RS Tera Polycotton Breatheable Top/Deck Cover + 126,39 RS Tera Under/Hull Cover + 126,39 RS Tera Aluminium Launching Trolley + 288,74

Laser Parts Locator LaserPerformance

Laser Parts Locator 52 90660 Laser Sails 9403 - Full rig, rolled, Hyde 9400 - Full rig, folded, Hyde 940 - Full rig, rolled, North 9407 - Full rig, folded, North FULL 95868 RADIAL 89034 95867 95866 4.7

Bladerider X8 Assembly Help Notes

2.1 Remove All Parts & Have Some Tools Handy Remove all items from the box and identify each part as per the packing sheet and check that nothing is missing. If there is something missing, please email

INTERNATIONAL RS TERA CLASS RULES

INTERNATIONAL RS TERA CLASS RULES 2013 The RS Tera was designed in 2005 by Paul Handley and granted ISAF International Class status in 2009 INDEX PART I ADMINISTRATION Section A General A.1 Language...

Far East Boat Optimist Rigging Instructions

Far East Boat Optimist Rigging Instructions These instructions are written specifically for Far East Boats Championship and Racing Optimist. Parts of the Optimist PAGE 1 Sprit Wind Indicator Sail Mast

FDR CHRYSLER 16' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange

Page of 6 Revised 2/0/76 RIGGING INSTRUCTIONS FDR CHRYSLER 6' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange to the new owner, or the new owner is

Sailcenter Marina Muiderzand IJmeerdijk AA Almere. T +31 (0) E

Sailcenter Marina Muiderzand IJmeerdijk 18 1361 AA Almere T +31 (0)36 540 88 95 E info@sailcenter.nl www.sailcenter.nl Laser Parts Locator All rights reserved. 2009 LaserPerformance. Laserperformance and

SHIELDS PARTS PRICE SHEET

7 Narrows Road * P.O. Box 152 * Wareham, MA 02571-0152 * Phone (508) 295-3550 * Fax (508) 295-3551 www.capecodshipbuilding.com * info@capecodshipbuilding.com SHIELDS PARTS PRICE SHEET Part Number DESCRIPTION

Rigging manual SailQube School & Race

Congratulations on the purchase of your SailQube! Please take the time to read through this manual in order to familiarise yourself with your SailQube. If you have any further outstanding questions, please

LaserPerformance NORTH AMERICA 300 Highpoint Avenue Portsmouth, Rhode Island USA t SAIL f

LaserPerformance NORTH AMERICA 300 Highpoint Avenue Portsmouth, Rhode Island 02871 USA t +1 800 966 SAIL f +1 401 683 0990 LaserPerformance EUROPE Station Works, Long Buckby Northamptonshire NN6 7PF United

ASSEMBLY MANUAL HOBIE CATSY

ASSEMBLY MANUAL HOBIE CATSY HOBIE CAT EUROPE ZI Toulon Est, BP 50 8078 Toulon cedex 9, France Tel : + (0)9 08 78 78 - Fax : + (0)9 08 99 Email : hobiecat@hobie-cat.net - http://www.hobie-cat.net ASSEMBLY

Measurement Notes. By Ian Cox, ISAF International Measurer, ITCA

Measurement Notes By Ian Cox, ISAF International Measurer, ITCA These notes have been amended to include all rule changes up to and including 2 May 2005 and any subsequent specification changes. The rules

Laser Rigging Basics St. Jamestown Sailing Club

Laser Rigging Basics St. Jamestown Sailing Club This rigging guide is intended as a reference of Laser rigging best practices. It is not a substitute for personal instruction and you should attend a Laser

Topaz OMEGA Rigging Instructions

Topaz OMEGA Rigging Instructions www.toppersailboats.com TOPAZ OMEGA RIGGING INSTRUCTIONS CONTENTS 02. Introduction 02. Manufacturers Details 03. Maintenance 04. Raising the Mast 05. Attaching the Boom

SPLASH CLASS RULES 2014

INTERNATIONAL SPLASH CLASS RULES 2014 The SPLASH was designed in 1987 by Jac de Ridder and was adopted as an ISAF recognised class in 1998 and an International Class in 2005. 1 INDEX Part I Administration

Contents 1. Components Introduction Preparation Hull Foredeck Mast Boom...

Rigging Manual V5 Contents 1. Components...1-6 1.1 - Spars...1 1.2 - Rudder pack...1 1.3 - Rigging pack... 2 1.4 - Rope pack... 3 1.5 - Asymmetrical spinnaker pack... 4 1.6 - Symmetrical spinnaker pack...

Dolly wheels in slot #8 for Boat #10.

Rigging: Laser SAIL SELECTION: The International Laser Class has three different official rigs. Each sail is designed for sailors of different weights. The Standard Rig was designed for sailors weighing

J/70 Building Specification

DECK, HARDWARE AND FITTINGS 1 FRP Composite deck 2 Indeck furler unit 3 Bow "U" bolt mooring eye (stainless) Option for one 6" (152mm) mooring cleat in lieu of eye. 4 Shroud chainplates (stainless) (BSI

Laser Parts Locator LaserPerformance

Laser Parts Locator 52 90660 Laser Sails 9403 - Full rig, rolled, Hyde 9400 - Full rig, folded, Hyde 940 - Full rig, rolled, North 9407 - Full rig, folded, North FULL 95868 RADIAL 89034 95867 95866 4.7

Vanguard Sailboats 300 Highpoint Avenue Portsmouth, RI For the dealer nearest you call SAIL

Vanguard Sailboats 300 Highpoint Avenue Portsmouth, RI 02871 For the dealer nearest you call 800. 966.SAIL Unpack the major parts listed below and lay them out on a soft piece of ground free of sharp objects.

Keel Owners Board / Half Hull Centerboard Owners Board / Half Hull. Tri-Color Masthead Light

Mariner Parts List Mariner Sailboats 40000.000 Mariner Centerboard 50000.000 Mariner Keel Documentation & Awards 47001.000 Mariner Owners Packet 47015.150 Keel Owners Board / Half Hull 47015.250 Centerboard

Follow these easy steps to properly assemble your new Zim 420

Thank you for buying a Zim 420 and welcome to the Zim Sailing family. We are extremely proud of the quality of our boats and the race results are proven. Many of the top sailors are choosing Zim over other

Wysiwig - Wayfarer Rigging Guide

Wysiwig - Wayfarer 8767 - Rigging Guide GENERAL NOTES Before you go afloat, make sure that the self-bailer is closed. It is operated through the cut-out in the starboard floorboard. If you do not close

INSTRUCTION NO

INSTRUCTION NO. 14138 Dagger Rigging Instr. P~e 2.of 6 MODEL 244 CHRYSLER "DAGGER" SAILBOAT RIGGING INSTRUCTIONS We, at Chrysler Boat Corporation, congratulate you on your selection of our Model 244 "Dagger"

420 Rigging Guide.

A smaller version of the olympic 470 class, the 420 was formerly a youth development class. It has a good class following, and is a good introduction to performance boats. With a PY number of 1087 it s

WILLEY CAT SHEET B. Daggerboard - 9mm x 2 Daggerboard Ballast - Lead/Epoxy - 6" diameter

WILLEY CAT Willey Cat was designed for performance. The flexible reefing arrangement allows tailoring your sail area to wind conditions. Best with a crew of -. DESIGN FEATURES Flexible Reefing - reefs

2. DEFINITION In these Rules, builder means any manufacturer who is licensed to build the BYTE Class sailboat by the Copyright Holder.

By-law 1 of the BYTE Class International Association Constitution 2005 Byte Class Rules Effective March 1, 2005 Revisions to the 2000 Rules are shown in red PART 1 1. OVERRIDING ONE-DESIGN PRINCIPLE The

INTERNATIONAL RS FEVA CLASS RULES. Closed class rules for a one-design class.

INTERNATIONAL RS FEVA CLASS RULES 2008 Closed class rules for a one-design class. This version has been updated to reflect the changes to the ERS 2005 2008. Date of this version 05-12-2007 The RS FEVA

OPPI Rigging Guide 3/2008

OPPI Rigging Guide 3/2008 McLaughlin Boat Works optistuff.com Thanks for purchasing OPPI, the most durable and F-U-N sailboat available. Rigging your OPPI is easy and the following pictures make it a breeze

Devoti Sailing D-Zero Class Rules

Devoti Sailing D-Zero Class Rules The D-Zero was designed by XXX in XXX. Version: Version 1.4 17 th September 2014 INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2 Abbreviations... 4

Safety Afloat. Before you go sailing:

RIGGING MANUAL Safety Afloat This instruction manual is not a guide to sailing your craft and it should not be considered suitable for the task of learning to sail a boat. Please read the manual before

Club 420 Class Rigging Manual

Club 420 Class Rigging Manual Performance sailcraft 2000 Inc 2555 Dollard Lasalle, Quebec, H8N 3A9 Tel: 514 363 5050 email: info @ps2000.ca Website: www.ps2000.ca Mast set up Remove the pole and unwrap

Rigging Manual V Unpacking and Preparation. Useful knots to know V15. Fogh Marine

V15 V15 Rigging Manual 1 Unpacking and Preparation 2 Assembly 3 Sail Control 4 Launching 1. Unpacking and Preparation Unpack the major parts listed below and lay them out on a soft piece of ground free

INTERNATIONAL SUNFISH CLASS ORGANIZATION CLASS RULES

INTERNATIONAL SUNFISH CLASS ORGANIZATION November 2017 CLASS RULES 1. GENERAL The design and development of the Sunfish sailboat was directed to the creation of a one-design class where the true test is

Table of content Introduction 5 1. Part 1. Assembly Tools needed for Assembly Glossary Hulls Mounting the beams 7

Table of content Introduction 5 1. Part 1. Assembly 6 1.1. Tools needed for Assembly 6 1.2. Glossary 6 1.3. Hulls 7 1.3.1. Mounting the beams 7 1.3.2. Fixing the mast rotation cleats 8 1.3.3. Placing the

1 Glossary /Useful Boat Terminology. 2 Parts of The Pico/Specifications. 3 Sail Numbers. 4 Rigging the Mast and Cunningham. 5 Raising the Mast

PICO PICO RACE PICO Rigging Manual Glossary /Useful Boat Terminology 2 Parts of The Pico/Specifications 3 Sail Numbers 4 Rigging the Mast and Cunningham 5 Raising the Mast 6 Rigging and Fitting the Boom

RUDDER & TILLER HARDWARE Battlestick Tiller Extensions - Features & Information 77 Battlestick Tiller Extensions 78 Rudder Hardware 79

One of the best parts about working at Ronstan is getting to know the diverse range of sailors that we interact with every day. Whether we are talking to world-class racing sailors, a young newcomer to

+44 (0) BlokartUK pricing 2015

Blokart 3.0m GBP BLO305* Blokart Classic 3.0m Complete 1.970,00 BLO310* Blokart Comp 3.0m Complete 2.550,00 BLO315* Blokart Pro 3.0m Complete 2.660,00 Blokart 4.0m BLO405* Blokart Classic 4.0m Complete

1 MAY A division of Rolly Tasker Sails (Thailand) Co Ltd., 84/2 Moo 2, Chaofa Road, T. Vichit, A. Muang, Phuket 83000, Thailand

1 MAY 2011 A division of Rolly Tasker Sails (Thailand) Co Ltd., 84/2 Moo 2, Chaofa Road, T. Vichit, A. Muang, Phuket 83000, Thailand STORAGE FOR SAIL PARTS CNC MACHINE CENTRE 1 1 DEADEYE ID 19 mm. 6C

PARTS - FORWARD. Kayaking + Fishing Parts & Accessories Hook HATCH SEAL "TRIM-LOC" (TOP MOLDED) 5 REQ

PARTS - FORWARD 72104001 Hook 71301001 HATCH SEAL "TRIM-LOC" (TOP MOLDED) 5 REQ 71302001 HULL FLANGE SEAL (pre 2012 ADV) "TRIM-LOC" (SIDE GLUED) 5 REQ 80012001 Pedal Retainer Bungee w/ Hook 84560001 Mast

HOW TO RIG A CORMORANT

HOW TO RIG A CORMORANT Page 1 of 6 Instructions adapted from Cormorant Owner s Handbook 1 Ensure that peak halyard, throat halyard and topping lift are attached to the mast as shown in Fig. 1. 2 Set-up

Rigging Manual V1 PLEASE FOLLOW RIGGING MANUAL IN THE CORRECT ORDER

Rigging Manual V1 PLEASE FOLLOW RIGGING MANUAL IN THE CORRECT ORDER Contents 1. Introduction... 1 2. Preparation... 2-21 2.1 - Preparation... 3 2.2 - Unpacking... 3 2.3 - Pack contents... 4-5 2.4 - Adding

STANDARD SPECIFICATIONS

STANDARD & OPTIONS SPECIFICATIONS January 2018 STANDARD SPECIFICATIONS TECHNICAL DATA Length: 5,55 m Width: 2,38 m Light displacement: 500 kg Mainsail area: 14,5 m2 Jib area: 9,2 m2 Gennaker area: 32 m2

Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18. ASSEMBLY MANUAL : HOBIE CAT 14 Std & Race HOBIE CAT 14 STD & RACE

Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18 HOBIE CAT 14 STD & RACE Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 2/18 TABLE OF CONTENT Part list... 3 Ropes and

3. Sail Kit. Table of Contents: Portland Pudgy Safety Dinghy: 3. Sail Kit

Table of Contents: 3. Sail Kit Sailing the Portland Pudgy... 1 Sailing Tips... 1 Reducing the Sail Area (Reefing the Sail)... 2 Method 1. Reducing Sail without the Exposure Canopy... 2 Method 2. Reducing

RS Vareo OWNER S MANUAL

RS Vareo OWNER S MANUAL LDC Racing Sailboats, Trafalgar Close, Chandlers Ford, Eastleigh SO53 4BW, GBR Tel. +44 (0)23 8027 4500 Fax. +44 (0)23 8027 4800 INTRODUCTION Congratulations on the purchase of

TUNE YOUR SAILS SPEED

TUNE YOUR SAILS FOR OUTRIGHT SPEED Rev R05 Important Notes l We recommend not exceeding 350lbs total crew weight as this puts excess stress on the mast and the boat. l When sailing, the boat performs best

Rigging Guide. 1. Unpacking and Preparation: Laser, Radial & Laser Parts of the Laser. 3. Hardware Location. 4. Hardware Installation

LASER 4.7 LASER RADIAL LASER LASER Rigging Guide 1. Unpacking and Preparation: Laser, Radial & Laser 4.7 2. Parts of the Laser 3. Hardware Location 4. Hardware Installation 5. Rigging the Traveler 6. Rigging

COMET CLASS MEASUREMENT RULES

COMET CLASS MEASUREMENT RULES 1. INTENTION & INTERPRETATION. a. The intention of the Class Rules shall be to maintain a one-design class in which racing is a true test of sailing skill. The boats shall

RIGGING: RS- Vision. 1. A properly derigged boat appears as below. Please note that the tiller extension is NOT bent.

RIGGING: RS- Vision The RS- Visions should be rigged on the floating dock or on its trailer then put into the water. While rigging, carefully inspect the vessel and equipment to make sure everything is

OWNER S MANUAL. for Inters and Nacra F-18

OWNER S MANUAL for Inters and Nacra F-18 Tools you ll need: 9/16 socket Wrench Phillips Screwdriver Allen Wrench (included) HULL ASSEMBLY Place hulls boxes approx. 8 feet apart. Make sure both hulls are

MUSTO PERFORMANCE SKIFF

INTERNATIONAL MUSTO PERFORMANCE SKIFF CLASS RULES 2012 The Musto Performance Skiff was designed in 1999 by Dr Joachim Harpprecht and was adopted as an International class in 2007. Musto Performance Skiff

INTERNATIONAL. 29er CLASS RULES. The 29er Class was designed in 1997 by Julian Bethwaite and was adopted as an ISAF International Class in 2001.

INTERNATIONAL 29er CLASS RULES 2015 The 29er Class was designed in 1997 by Julian Bethwaite and was adopted as an ISAF International Class in 2001. INDEX PART I ADMINISTRATION Section A General A.1 Language...

1 Parts of the Hull. 2 Parts of the Sail. 3 Sunfish Mast Kit. 4 Bailer Installation. 5 Ratchet Block Installation

SUNFISH SUNFISH RACE SUNFISH Rigging Manual Go-fast tip number one: Read this rigging guide first. 1 Parts of the Hull 2 Parts of the Sail 3 Sunfish Mast Kit 4 Bailer Installation 5 Ratchet Block Installation

Laser Class Rules - One Design

One of the attractions of the Laser for most owners is that the class rules are very strict and that the boat is one design. The Laser philosophy incorporated in the rules is that we want to go sailing,

QuikVang. The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL D-30 MODEL D-40

QuikVang The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL D-30 MODEL D-40 33 Broadcommon Road, Bristol, RI 02809 USA T: 401.253.4858 F: 401.253.2552 www.hallspars.com 1

Paper Tiger Catamaran International Association MEASUREMENT FORM

Paper Tiger Catamaran International Association MEASUREMENT FORM Amended June 2000: July 2002: April 2012 Name of boat: Sail No: Owner s name: Owner s address: Postcode: Phone: (H) (B) (Mob.) Email: Owner

The 29er is a strict one design designed in 1997 by Julian Bethwaite

29er Class Rules The 29er is a strict one design designed in 1997 by Julian Bethwaite Section A - Fundamental Rules A.1 Type of Class Rules A.1.1. These are closed class rules. A.1.2. Builders licensed

Rigging Manual. 1 Parts of the Hull. 2 Parts of the Sail. 3 Sunfish Mast Kit. 4 Bailer Installation. 5 Ratchet Block Installation

SUNFISH SUNFISH RACE SUNFISH Rigging Manual 1 Parts of the Hull Go-fast tip number one: Read this rigging guide first. 2 Parts of the Sail 3 Sunfish Mast Kit 4 Bailer Installation 5 Ratchet Block Installation

MUSTO PERFORMANCE SKIFF

INTERNATIONAL MUSTO PERFORMANCE SKIFF CLASS RULES 2008 The Musto Performance Skiff was designed in 1999 by Dr Joachim Harpprecht and was adopted as an International class in 2007. Musto Performance Skiff

RIGGING INSTRUCTIONS Let's assume that you have your boat on a trailer when you take delivery from your dealer.

This is the original owner's manual, written about 1972, and applicable for boats manufactured through 1978. Starting in 1979 a few changes were made in the roller furling jib and forestay arrangement.

A Basic Guide to Europe Dinghy Rigging

The Basics: A Basic Guide to Europe Dinghy Rigging Use the smallest blocks available for the line size. Most of the blocks on your boat will be micro blocks. Examine all of your rigging and ensure that

Devoti Sailing D-Zero Class Rules

Devoti Sailing D-Zero Class Rules The D-Zero was designed by Dan Holman and Devoti Sailing sro in 2014 Version: Version 1.9 23 rd May 2017 INDEX PART I ADMINISTRATION Section A General A.1 Language...

Rigging Manual V1 PLEASE FOLLOW RIGGING MANUAL IN THE CORRECT ORDER

Rigging Manual V1 PLEASE FOLLOW RIGGING MANUAL IN THE CORRECT ORDER Contents 1 - Introduction...1 2 - Specification... 2 3 - Components... 3-4 3.1 - Customer pack...3 3.2 - Rope pack (regular)... 4 3.3

2016 Hardware for Mirror 16 Draft as of v1

2016 Hardware for Mirror 16 Draft as of 2016.04.16 v1 Rebuilding the Mirror 16 one piece at a time... My fathers first boat was a Mirror 16 and from that day forward sailing was part of the family. In

OH MARINE EQUIPMENT made to last

OH Fairlead thimbles (round) OH Marine Equipment has made a new product: OH fairlead thimbles (round). The thimbles can be spliced into control lines and are used to deflect sheets and control lines or

Sail it. Live it. Love it.

R I G G I N G G U I D E Sail it. Live it. Love it. CONTENTS 1. INTRODUCTION 2. COMMISSIONING 2.1 Preparation 2.2 Rigging the Mast 2.3 Stepping the Mast 2.4 Rigging the Boom 2.5 Hoisting the Mainsail 2.6

1 Tuning Platform Reseating Beam Pads Rudder alignment Noisy Foils Rig Tension...

Contents 1 Tuning... 2 1.1 Platform... 2 1.2 Reseating Beam Pads... 2 1.3 Rudder alignment... 3 1.4 Noisy Foils... 3 1.5 Rig Tension... 4 1.6 Mast rake... 4 1.7 Spreader rake... 5 1.8 Diamond tension...

New Product Update - September 2017

New Product Update September 2017 Series 1 Ball Bearing Utility Blocks Available Now With a sheave diameter of 1mm these are the smallest and lightest ball bearing blocks available! The single block delivers

MINNOW SAILING ASSOCIATION. RULES OF MEASUREMENT AND CONSTRUCTION (Amended and approved to Aug 2015 by all State Associations)

A. GENERAL Minnow Measurement Rules 2015 MINNOW SAILING ASSOCIATION RULES OF MEASUREMENT AND CONSTRUCTION (Amended and approved to Aug 2015 by all State Associations) (i) The Minnow is a One-design class

Owner s Manual. Revision Date: Copyright 2012 Falcon Marine LLC 9008 Marlin St. Cape Canaveral, FL USA

Owner s Manual Revision Date: 2013-02-06 Copyright 2012 Falcon Marine LLC 9008 Marlin St. Cape Canaveral, FL 32920 USA 321-799-4841 Falcon Marine LLC Falcon Marine LLC Falcon F18 This manual covers the

HOBIE TEDDY ASSEMBLY MANUAL

ASSEMBLY MANUAL HOBIE TEDDY HOBIE CAT EUROPE ZI Toulon Est, BP 50 83078 Toulon cedex 9, France Tel : +33 (0)494 08 78 78 - Fax : +33 (0)494 08 3 99 Email : info@hobie-cat.net - http://www.hobie-cat.net

Accessories. Shadow Sport/Pro Art. nr XSH0401/XSH0451. Foot bar extension Art. nr XFB0201. Junior foot bar Art. nr XFB0111. POD Art.

Accessories Shadow Sport/Pro Art. nr XSH0401/XSH0451 Attach the Shadow to your blokart and convert it into a two-seater. Available in Sport and Pro version. Foot bar extension Art. nr XFB0201 For long

BEFORE YOU BEGIN TO READ THE WI BEFORE YOU BEGIN TO READ THE WA BEGIN BY READING THIS RIGGING GU

BEFORE YOU BEGIN TO READ THE WI BEFORE YOU BEGIN TO READ THE WA BEGIN BY READING THIS RIGGING GU Nomad Rigging Guide uide to better familiarize yourself with the parts and rigging of. If you have any questions

The Mirror, Rigging and Improving Performance. Series One, Basic Improvements

The Mirror, Rigging and Improving Performance Short notes to help you towards that elusive goal of perfect performance. Series One, Basic Improvements Angus Carlisle Mirror Fleet Captain, 2005 Ripon Sailing

Rigging Manual BUG BUG BUG RACE. 10 Cunningham. 14 Launching and Basic Safety On The Water. 12 Mainsail Reefing. 13 Rowing & Outboard Engine Usage

BUG BUG RACE BUG Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Parts of the Bug/Specifications 4 Maintenance and Service 5 Sail Numbers 6 Rigging and Raising The Mast 7 Rigging and Fitting The

Rules of the Association Miracle Association Rules of Measurement and Construction MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION

MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION 2011 1. GENERAL [a] This is a One Design Class and the object of these rules is to ensure that the Hull form, hull weight, Sail plan and Spars, the

Micros cleat range Nylon and Aluminium

Open Cleat Micros cleat range Nylon and Small, neat and lightweight for 1- mm /6-5 /2 rope. Advanced tooth technology to hold all types of small rope. Can be fixed with standard screws and rivets, on tubular

Fitting Instructions for Single Line Mainsail Reefing System For Yachts Up To 9m (30ft) - Part No

Fitting Instructions for Single Line Mainsail Reefing System For Yachts Up To 9m (30ft) - Part No. 41 130 This single line reefing kit allows reefing control lines to be led aft to the safety of the cockpit.

Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet an

By User Manual Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet and Traveler 11. Main Sail 12. Downhaul

Tuning Guide January 2012

Tuning Guide January 2012 www.skud.org This tuning guide has been prepared by the IACA SKUD 18 Committee to assist new sailors in the SKUD 18 class to prepare their MkI or MkII boat to a competitive level

Rigging Manual. 1 Glossary. 2 Useful Boat Terminology. 3 Cordage Lengths. 4 Sail Number Positioning. 5 Building the Hull Platform

DART 16 DART 16 RACE DART 16 Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Cordage Lengths 4 Sail Number Positioning 5 Building the Hull Platform 6 Trampoline Fitting 7 Rigging & Raising The Mast

XD Hiking Strap, Main Sheet and Rudder Downhaul System

XD Hiking Strap, Main Sheet and Rudder Downhaul System 1 2 9 6 7 10 XD Hiking Strap, Main Sheet and Rudder Downhaul System 5 8 4 3 Vectran V12 These lines are used extensively throughout the XD system.

Holt Contents. Holt Blocks. Holt Cleats. Holt Spars & Rigging. Holt Deck Hardware. olt Accessories

Master.qxd 0/03/2004 2.34 Pagina Holt Contents Holt Blocks 4 - Dynamic bearing system 4 20mm dynamic blocks 30mm dynamic blocks 6 Snatch blocks 7 40mm blocks 7 High tension blocks 8 AUTORATCHET 9 Sheaves

1 Glossary. 2 Useful Boat Terminology. 3 Cordage Lengths. 4 Sail Number Positioning. 5 Building the Hull Platform. 6 Trampoline Fitting

DART 16 DART 16 RACE DART 16 Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Cordage Lengths 4 Sail Number Positioning 5 Building the Hull Platform 6 Trampoline Fitting 7 Rigging & Raising The Mast

International Cadet Class Cadet Mark IV Specification Measurement Form 2010

International Cadet Class Cadet Mark IV Specification Measurement Form 2010 The Cadet was designed in 1946 by Jack Holt and was adopted as an international class in 1958. International Cadet Class Cadet

Table of content Introduction 5 1. Part 1. Assembly 6 1.1. Tools needed for Assembly 6 1.2. Glossary 6 1.3. Hulls 7 1.3.1. Mounting the beams 7 1.3.2. Fixing the mast rotation cleats 8 1.3.3. Mounting

Compact to fit into small locations. Ideal when a rope is not always cleated. Large Becket makes it easy for frequent de-rigging.

Micros cleat range Nylon and Small, neat and lightweight for 1- mm /6-5/2 rope. Advanced tooth technology to hold all types of small rope. Can be fixed with standard screws and rivets, on tubular or flat

Rules of the Association Miracle Association Rules of Measurement and Construction MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION

MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION 2018 1. GENERAL [a] This is a One Design Class and the object of these rules is to ensure that in exterior Hull form, hull weight, Sail plan and Spars,

VAGO Rigging Manual VAGO VAGO RACE. 1 Glossary. 2 Useful Boat Terminology. 3 Sail Number Positioning. 4 Rigging and Raising the Mast.

VAGO VAGO RACE VAGO Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Sail Number Positioning 4 Rigging and Raising the Mast 5 Boom and Gnav 6 Sails 7 Lower Shroud Tensioning 8 Gennaker 9 Mainsail

Rigging Manual DART 16 DART 16 DART 16 RACE. 16 On The Water. 17 Safety Afloat. 10 Mainsail. 14 Your First Sail. 15 Your Dart 16 Capsize Technique

DART 16 DART 16 RACE DART 16 Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Cordage Lengths 4 Sail Number Positioning 5 Building the Hull Platform 6 Trampoline Fitting 7 Rigging & Raising The Mast

PT 11 trouble-shooting and maintenance.

PT 11 trouble-shooting and maintenance. Does your rudder not stay down?...your back seat slip off?...your knobs tight and your leather pads loose? Maybe we can help. We have used our PT 11 s hard enough

Telescopic winch handle Speedfriend"

Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;

INTERNATIONAL 420 CLASS RULES 2013 v2

INTERNATIONAL 420 CLASS RULES 2013 v2 2013 International 420 Class Rules 1 INDEX PART I ADMINISTRATION Section A General A.1 General Information.. 3 A.2 Language... 3 A.3 Abbreviations... 3 A.4 Authorities

QuikVang. The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL A-8 MODEL A-12

QuikVang The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL A-8 MODEL A-12 33 Broadcommon Road, Bristol, RI 02809 USA T: 401.253.4858 F: 401.253.2552 www.hallspars.com 1 INTRODUCTION

CLASS RULES Closed Class Rules for a Manufacturer Controlled Class

CLASS RULES 2016 Closed Class Rules for a Manufacturer Controlled Class DRAFT ONLY Revision 6: July 2016 INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2 Abbreviations... 4 A.3 Authorities...