Laser Parts Locator LaserPerformance
|
|
- Pamela Merritt
- 5 years ago
- Views:
Transcription
1 Laser Parts Locator 52
2 90660 Laser Sails Full rig, rolled, Hyde Full rig, folded, Hyde Full rig, rolled, North Full rig, folded, North FULL RADIAL Radial, rollded, Hyde Radial, folded, Hyde 94 - Radial, rolled, North Radial, folded, North , rolled, Hyde , folded, Hyde , rolled, North , folded, North SAIL NUMBERS in, blue in, red in, blue in, red in, black SAIL BAGS sailbag, white Radail sailbag, red Full rig sailbag, blue Batten tips 53
3 Laser Deck 9049 #0 /4 RH 9279 Nautos Ratchet Block #0 5/8 ss RH #8 x /4 ss RH #0 x /2 in SS New Friction Pad LASER HIKING STRAPS 940 Blue with White Logo 938 New Zealand Style 939 Black nylon webbing 94 Grey 5in 942 Seitech strap 943 White with Blue Logo 9293 XD style 9432 Blue with White Logo #0 x /2 ss RH Complete Bailer Assembly O-RING KIT 9087 Cockpit Drain Plug Assembly 935 Drain Bung Only 54
4 Laser Race Deck 9049 #0 /4 RH 9333 Harken Carbo Ratchet Block #0 5/8 ss RH #8 x /4 ss RH #0 x /2in SS New Friction Pad LASER HIKING STRAPS 938 #0 x /2 ss RH Blue with White Logo 938 New Zealand Style 939 Black nylon webbing 94 Grey 5in 942 Seitech strap 943 White with Blue Logo 9293 XD style 9432 Blue with White Logo Complete Bailer Assembly O RING KIT 9087 Cockpit Drain Plug Assembly 935 Drain Bung Only 55
5 Laser XD Deck 9333 HARKEN RATCHET BLOCK 9049 #0 /4 RH #0 5/8 ss RH #8 x /4 ss RH #0 x /2 in SS New Friction Pad LASER HIKING STRAPS 9293 #0 x /2 ss RH Blue with White Logo 938 New Zealand Style 939 Black nylon webbing 94 Grey 5in 942 Seitech strap 943 White with Blue Logo 9293 XD style 9432 Blue with White Logo Complete Autobailer O RING KIT 9087 Cockpit Drain Plug Assembly 935 Drain Bung Only 56
6 Laser Outhaul BOOM COMPLETE /6 x 5/8 SS Rivet Kit includes rivets Webbing Strap Plastic Lacing Eye 3/6 x 3/4 SS Rivet includes rivets Harken Boom and Traveler Block Upgrade Includes NEW Harken Boom Blocks, Traveler Block and replacement rivets (not pictured) /6 x 3/8 SS Rivet
7 Laser Race Outhaul BOOM COMPLETE /6 x 5/8 SS Rivet Kit includes rivets Webbing Strap Plastic Lacing Eye Clew Strap Clew Sleeve /6 x 3/4 SS Rivet includes rivets Harken Boom and Traveler Block Upgrade Includes NEW Harken Boom Blocks, Traveler Block and replacement rivets (not pictured) /6 x 3/8 SS Rivet
8 Laser XD Outhaul BOOM COMPLETE /6 x 5/8 SS Rivet Kit includes rivets Webbing Strap Plastic Lacing Eye Clew Strap Clew Sleeve 95 3/6 x 3/4 SS Rivet Harken Boom and Traveler Block Upgrade Includes NEW Harken Boom Blocks, Traveler Block and replacement rivets (not pictured) includes rivets /6 x 3/8 SS Rivet
9 Laser Gooseneck includes rivets 3/6 x 3/8, SS, RIVET includes rivets BOOM COMPLETE inclues rivets 3/6 x 3/8, SS RIVET includes rivets 3/6 x 3/8, SS RIVET 60
10 Laser Vang Straight Vang Key Curved Vang Key 9067 Block only Includes block and key 9065 Super Swivel Standard Swivel 9066 #0, /2 SS 939 #0, /2 SS
11 Laser Race Vang Straight Vang Key Complete Race Vang 9907 Complete Race Power Pack #0, 5/8 SS Plate with blocks Plate with cleats 62
12 Laser XD Vang Straight Vang Key HARKEN VANG ASSEMBLY COMPLETE 90677HARKEN VANG PARTS ONLY /4 X /2 SS HARKEN OUTHAUL AND CUNNINGHAM KIT Plate with blocks 934 Plate with cleats #0 /2 SS #0 5/8 SS
13 Laser Rudder 8577 #0 3/4 ss RH #0 ss RH Gorilla Tiller and extension Harken Boom and Traveler Block Upgrade Includes NEW Harken Boom Blocks, Traveler Block and replacement rivets (not pictured) #0 3/4 ss RH Mega Bolt 957 Current drain plug Rudder Blade Rudder Bushing Kit (includes bolt) 8553 Complete Rudder Includes rudder blade and rudder head LASER DRAIN PLUGS With approximate year of use 9093 White Bayonette (2), used RWO, Black (), used Holt, Grey (), used Beckson, Black (), used Holt Black used 08-current 64
14 Laser XD Rudder mm #0 3/4 ss RH #0 ss RH Harken Boom and Traveler Block Upgrade Includes NEW Harken Boom Blocks, Traveler Block and replacement rivets (not pictured) #0 ss RH #0 3/4 ss RH Mega Bolt Rudder Blade Rudder Bushing Kit (includes bolt) 8553 Complete Rudder Includes rudder blade and rudder head 957 Current Drain Plug LASER DRAIN PLUGS With approximate year of use 9093 White Bayonette (2), used RWO, Black (), used Holt, Grey (), used Beckson, Black (), used Holt Black used 08-current 65
15 LaserPerformance NORTH AMERICA 300 Highpoint Avenue Portsmouth, Rhode Island 0287 USA t SAIL f LaserPerformance EUROPE Station Works, Long Buckby Northamptonshire NN6 7PF United Kingdom t +44 (0) f +44 (0) LaserPerformance ASIA Room 345 China Merchants Tower Shun Tak Centre No Connaught Road Central Hong Kong t f LaserPerformance MIDDLE EAST Dubai Investment Park po box Dubai, UAE t LASERPERFORMANCE.COM All rights reserved.. LaserPerformance and associated logos are trademarks. Laser, SB3, Sunfish, and Dart are trademarks used under license. LaserPerformance reserves the right to make design and/or specification changes to any of their products as part of their continuous development program.
Laser Parts Locator LaserPerformance
Laser Parts Locator 52 90660 Laser Sails 9403 - Full rig, rolled, Hyde 9400 - Full rig, folded, Hyde 940 - Full rig, rolled, North 9407 - Full rig, folded, North FULL 95868 RADIAL 89034 95867 95866 4.7
More informationSailcenter Marina Muiderzand IJmeerdijk AA Almere. T +31 (0) E
Sailcenter Marina Muiderzand IJmeerdijk 18 1361 AA Almere T +31 (0)36 540 88 95 E info@sailcenter.nl www.sailcenter.nl Laser Parts Locator All rights reserved. 2009 LaserPerformance. Laserperformance and
More informationXD Hiking Strap, Main Sheet and Rudder Downhaul System
XD Hiking Strap, Main Sheet and Rudder Downhaul System 1 2 9 6 7 10 XD Hiking Strap, Main Sheet and Rudder Downhaul System 5 8 4 3 Vectran V12 These lines are used extensively throughout the XD system.
More informationextreme stability, speed, & convenience
With the buzz over the SB3 in Europe, it seems poised to take the U.S. market by storm. If you get the chance to take one for a sail, go for it; you ll quickly see why we named the SB3 as our top choice.
More informationRigging Manual. 1 Parts of the Hull. 2 Parts of the Sail. 3 Sunfish Mast Kit. 4 Bailer Installation. 5 Ratchet Block Installation
SUNFISH SUNFISH RACE SUNFISH Rigging Manual 1 Parts of the Hull Go-fast tip number one: Read this rigging guide first. 2 Parts of the Sail 3 Sunfish Mast Kit 4 Bailer Installation 5 Ratchet Block Installation
More informationLaserPerformance NORTH AMERICA 300 Highpoint Avenue Portsmouth, Rhode Island USA t SAIL f
LaserPerformance NORTH AMERICA 300 Highpoint Avenue Portsmouth, Rhode Island 02871 USA t +1 800 966 SAIL f +1 401 683 0990 LaserPerformance EUROPE Station Works, Long Buckby Northamptonshire NN6 7PF United
More informationextreme stability, speed, & convenience mark rushall, Yachts & Yachting
It is such a relief to sail a keelboat where one can be entirely independent of marinas, lifts and four wheel drive vehicles! The whole launching process is a straightforward two man job. mark rushall,
More informationPico rigging manual 2007.doc Page 1 of 28
Pico rigging manual 2007.doc Page 1 of 28 Pico Rigging Instructions The Pico rigging instructions are a guide to rigging your boat. Due to production supplies certain parts may be slightly modified from
More informationRigging Manual V Unpacking and Preparation. Useful knots to know V15. Fogh Marine
V15 V15 Rigging Manual 1 Unpacking and Preparation 2 Assembly 3 Sail Control 4 Launching 1. Unpacking and Preparation Unpack the major parts listed below and lay them out on a soft piece of ground free
More informationVanguard Sailboats 300 Highpoint Avenue Portsmouth, RI For the dealer nearest you call SAIL
Vanguard Sailboats 300 Highpoint Avenue Portsmouth, RI 02871 For the dealer nearest you call 800. 966.SAIL Unpack the major parts listed below and lay them out on a soft piece of ground free of sharp objects.
More informationSPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area RS Quba Foredeck QUB-FX-00 RS Feva Mast Gate (Post 0 Hex Head Recess) FEV-HF-00 Button head machine screw M x 0 FIX-B-B0 RS Feva / Quba Mast Gate Fastening Bolt
More informationSPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area 0 0 RS Feva Foredeck FEV-HF-00 Pozzi pan screw x / FIX-S-P0 Washer M 'A' FIX-W-00 00mm Black Dacron Patch ZDP00 Allen Hatch Inch: Sealing Ring A Pozzi pan screw
More informationSPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area 7 8 6 0 Allen Hatch Inch: Sealing Ring A8 Allen Hatch Inch: Black A7BLACK Pozzi pan screw 6 x / FIX-S6-P0 Allen Hatch Inch: Black A7BLACK SCK CSK M/SCREW M6 X
More informationLaser Rigging Basics St. Jamestown Sailing Club
Laser Rigging Basics St. Jamestown Sailing Club This rigging guide is intended as a reference of Laser rigging best practices. It is not a substitute for personal instruction and you should attend a Laser
More information1 Parts of the Hull. 2 Parts of the Sail. 3 Sunfish Mast Kit. 4 Bailer Installation. 5 Ratchet Block Installation
SUNFISH SUNFISH RACE SUNFISH Rigging Manual Go-fast tip number one: Read this rigging guide first. 1 Parts of the Hull 2 Parts of the Sail 3 Sunfish Mast Kit 4 Bailer Installation 5 Ratchet Block Installation
More informationDolly wheels in slot #8 for Boat #10.
Rigging: Laser SAIL SELECTION: The International Laser Class has three different official rigs. Each sail is designed for sailors of different weights. The Standard Rig was designed for sailors weighing
More informationRigging Guide. 1. Unpacking and Preparation: Laser, Radial & Laser Parts of the Laser. 3. Hardware Location. 4. Hardware Installation
LASER 4.7 LASER RADIAL LASER LASER Rigging Guide 1. Unpacking and Preparation: Laser, Radial & Laser 4.7 2. Parts of the Laser 3. Hardware Location 4. Hardware Installation 5. Rigging the Traveler 6. Rigging
More informationFar East Boat Optimist Rigging Instructions
Far East Boat Optimist Rigging Instructions These instructions are written specifically for Far East Boats Championship and Racing Optimist. Parts of the Optimist PAGE 1 Sprit Wind Indicator Sail Mast
More informationSHIELDS PARTS PRICE SHEET
7 Narrows Road * P.O. Box 152 * Wareham, MA 02571-0152 * Phone (508) 295-3550 * Fax (508) 295-3551 www.capecodshipbuilding.com * info@capecodshipbuilding.com SHIELDS PARTS PRICE SHEET Part Number DESCRIPTION
More informationSPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - ASY Pole & Tack Bar Area 0 0 STF Marine x0mm Clevis Pins and Split Rings ST-O00 RS Quest ASY Spinnaker Pole QUE-SP-00 Gottifredi Maffioli Evolution Race mm: Black KKD0BLK
More informationFDR CHRYSLER 16' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange
Page of 6 Revised 2/0/76 RIGGING INSTRUCTIONS FDR CHRYSLER 6' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange to the new owner, or the new owner is
More informationFollow these easy steps to properly assemble your new Zim 420
Thank you for buying a Zim 420 and welcome to the Zim Sailing family. We are extremely proud of the quality of our boats and the race results are proven. Many of the top sailors are choosing Zim over other
More informationOPPI Rigging Guide 3/2008
OPPI Rigging Guide 3/2008 McLaughlin Boat Works optistuff.com Thanks for purchasing OPPI, the most durable and F-U-N sailboat available. Rigging your OPPI is easy and the following pictures make it a breeze
More informationINSTRUCTION NO
INSTRUCTION NO. 14138 Dagger Rigging Instr. P~e 2.of 6 MODEL 244 CHRYSLER "DAGGER" SAILBOAT RIGGING INSTRUCTIONS We, at Chrysler Boat Corporation, congratulate you on your selection of our Model 244 "Dagger"
More informationRigging Manual BUG BUG BUG RACE. 10 Cunningham. 14 Launching and Basic Safety On The Water. 12 Mainsail Reefing. 13 Rowing & Outboard Engine Usage
BUG BUG RACE BUG Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Parts of the Bug/Specifications 4 Maintenance and Service 5 Sail Numbers 6 Rigging and Raising The Mast 7 Rigging and Fitting The
More informationA Basic Guide to Europe Dinghy Rigging
The Basics: A Basic Guide to Europe Dinghy Rigging Use the smallest blocks available for the line size. Most of the blocks on your boat will be micro blocks. Examine all of your rigging and ensure that
More informationLaser Class Rules - One Design
One of the attractions of the Laser for most owners is that the class rules are very strict and that the boat is one design. The Laser philosophy incorporated in the rules is that we want to go sailing,
More informationINTERNATIONAL RS TERA CLASS RULES
INTERNATIONAL RS TERA CLASS RULES 2013 The RS Tera was designed in 2005 by Paul Handley and granted ISAF International Class status in 2009 INDEX PART I ADMINISTRATION Section A General A.1 Language...
More informationJ/70 Building Specification
DECK, HARDWARE AND FITTINGS 1 FRP Composite deck 2 Indeck furler unit 3 Bow "U" bolt mooring eye (stainless) Option for one 6" (152mm) mooring cleat in lieu of eye. 4 Shroud chainplates (stainless) (BSI
More informationRaider 16/Sport - Spinnaker Rigging. Rigging Spinnaker
Rigging Spinnaker Step 1: Run the spinnaker halyard (minimum 52' in length) through the block then back down the mast. Step the mast as you normally would. Step 2: Temporally tie one end of the spinnaker
More informationTUNE YOUR SAILS SPEED
TUNE YOUR SAILS FOR OUTRIGHT SPEED Rev R05 Important Notes l We recommend not exceeding 350lbs total crew weight as this puts excess stress on the mast and the boat. l When sailing, the boat performs best
More informationASSEMBLY MANUAL HOBIE CATSY
ASSEMBLY MANUAL HOBIE CATSY HOBIE CAT EUROPE ZI Toulon Est, BP 50 8078 Toulon cedex 9, France Tel : + (0)9 08 78 78 - Fax : + (0)9 08 99 Email : hobiecat@hobie-cat.net - http://www.hobie-cat.net ASSEMBLY
More informationSafety Afloat. Before you go sailing:
RIGGING MANUAL Safety Afloat This instruction manual is not a guide to sailing your craft and it should not be considered suitable for the task of learning to sail a boat. Please read the manual before
More informationRUDDER & TILLER HARDWARE Battlestick Tiller Extensions - Features & Information 77 Battlestick Tiller Extensions 78 Rudder Hardware 79
One of the best parts about working at Ronstan is getting to know the diverse range of sailors that we interact with every day. Whether we are talking to world-class racing sailors, a young newcomer to
More informationSTANDARD SPECIFICATIONS
STANDARD & OPTIONS SPECIFICATIONS January 2018 STANDARD SPECIFICATIONS TECHNICAL DATA Length: 5,55 m Width: 2,38 m Light displacement: 500 kg Mainsail area: 14,5 m2 Jib area: 9,2 m2 Gennaker area: 32 m2
More informationKeel Owners Board / Half Hull Centerboard Owners Board / Half Hull. Tri-Color Masthead Light
Mariner Parts List Mariner Sailboats 40000.000 Mariner Centerboard 50000.000 Mariner Keel Documentation & Awards 47001.000 Mariner Owners Packet 47015.150 Keel Owners Board / Half Hull 47015.250 Centerboard
More informationClass Rules - One Design
Class Rules - One Design One of the attractions of the Laser for most owners is that the class rules are very strict and that the boat is one design. The Laser philosophy incorporated in the rules is that
More informationMUSTO PERFORMANCE SKIFF
INTERNATIONAL MUSTO PERFORMANCE SKIFF CLASS RULES 2012 The Musto Performance Skiff was designed in 1999 by Dr Joachim Harpprecht and was adopted as an International class in 2007. Musto Performance Skiff
More information2. DEFINITION In these Rules, builder means any manufacturer who is licensed to build the BYTE Class sailboat by the Copyright Holder.
By-law 1 of the BYTE Class International Association Constitution 2005 Byte Class Rules Effective March 1, 2005 Revisions to the 2000 Rules are shown in red PART 1 1. OVERRIDING ONE-DESIGN PRINCIPLE The
More informationINTERNATIONAL SUNFISH CLASS ORGANIZATION CLASS RULES
INTERNATIONAL SUNFISH CLASS ORGANIZATION November 2017 CLASS RULES 1. GENERAL The design and development of the Sunfish sailboat was directed to the creation of a one-design class where the true test is
More informationO PEN BIC CLASS RULES
O PEN BIC CLASS RULES 2013 Closed class rules for a one-design class. This version has been updated to reflect the changes to the ERS 2005 2008. Date of this version: 28 February 2013 The O pen Bic was
More informationRef :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18. ASSEMBLY MANUAL : HOBIE CAT 14 Std & Race HOBIE CAT 14 STD & RACE
Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18 HOBIE CAT 14 STD & RACE Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 2/18 TABLE OF CONTENT Part list... 3 Ropes and
More informationDISTRICT MEASURERS MANUAL International Laser Class Association,
DISTRICT MEASURERS MANUAL International Laser Class Association, CONTENTS 2 INTRODUCTION 3 DISTRICT MEASURERS BY-LAW 4 MEASUREMENT AND INSPECTION GUIDE 8 EQUIPMENT LIST - LASER INSPECTION 9 LIST OF COMPLIANT
More informationTUNE YOUR SAILS SPEED. Viper 640 Tuning Guide. Rev. R03b
TUNE YOUR SAILS FOR OUTRIGHT SPEED Mast Tuning Tuning Guide for the Carbon Mast SET SPREADER ANGLE Check spreader angle by placing a straightedge or string from shroud to shroud at the spreaders. Measure
More informationUPWIND Light wind: <8 knots Sail Setting
UPWIND Since the Laser is a strictly one designed class with very few controls, upwind sailing becomes very physical and technical. Big efforts will only result in little gains in your upwind speed. However,
More informationMelges 32 59,950. Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs. Builder/Designer Year: 2005
Melges 32 59,950 Builder/Designer Year: 2005 Builder: Soca Sailboats Designer: Reichel/Pugh Construction: Composite Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs Engine Make:
More informationWysiwig - Wayfarer Rigging Guide
Wysiwig - Wayfarer 8767 - Rigging Guide GENERAL NOTES Before you go afloat, make sure that the self-bailer is closed. It is operated through the cut-out in the starboard floorboard. If you do not close
More informationO PEN BIC CLASS RULES DRAFT
O PEN BIC CLASS RULES 2014 - DRAFT Closed class rules for a one-design class. This version has been updated to reflect the changes to the ERS 2005 2008. Date of this version: tbc The O pen Bic was designed
More informationRIGGING INSTRUCTIONS Let's assume that you have your boat on a trailer when you take delivery from your dealer.
This is the original owner's manual, written about 1972, and applicable for boats manufactured through 1978. Starting in 1979 a few changes were made in the roller furling jib and forestay arrangement.
More informationSPLASH CLASS RULES 2014
INTERNATIONAL SPLASH CLASS RULES 2014 The SPLASH was designed in 1987 by Jac de Ridder and was adopted as an ISAF recognised class in 1998 and an International Class in 2005. 1 INDEX Part I Administration
More informationMeasurement Notes. By Ian Cox, ISAF International Measurer, ITCA
Measurement Notes By Ian Cox, ISAF International Measurer, ITCA These notes have been amended to include all rule changes up to and including 2 May 2005 and any subsequent specification changes. The rules
More informationFARR 280-SPECIFICATION
FARR 280-SPECIFICATION Page 1 of 5 Specifications Length Overall Length Waterline Beam Keel Draft Displacement Keel Weight 8.72 m / 28.6 ft. 8.02 m / 26.3 ft. 2.87 m / 9.4 ft. 2.1 m / 6.89 ft. 1600 kg
More informationBEFORE YOU BEGIN TO READ THE WI BEFORE YOU BEGIN TO READ THE WA BEGIN BY READING THIS RIGGING GU
BEFORE YOU BEGIN TO READ THE WI BEFORE YOU BEGIN TO READ THE WA BEGIN BY READING THIS RIGGING GU Nomad Rigging Guide uide to better familiarize yourself with the parts and rigging of. If you have any questions
More information1 Glossary /Useful Boat Terminology. 2 Parts of The Pico/Specifications. 3 Sail Numbers. 4 Rigging the Mast and Cunningham. 5 Raising the Mast
PICO PICO RACE PICO Rigging Manual Glossary /Useful Boat Terminology 2 Parts of The Pico/Specifications 3 Sail Numbers 4 Rigging the Mast and Cunningham 5 Raising the Mast 6 Rigging and Fitting the Boom
More informationWILLEY CAT SHEET B. Daggerboard - 9mm x 2 Daggerboard Ballast - Lead/Epoxy - 6" diameter
WILLEY CAT Willey Cat was designed for performance. The flexible reefing arrangement allows tailoring your sail area to wind conditions. Best with a crew of -. DESIGN FEATURES Flexible Reefing - reefs
More informationClub 420 Class Rigging Manual
Club 420 Class Rigging Manual Performance sailcraft 2000 Inc 2555 Dollard Lasalle, Quebec, H8N 3A9 Tel: 514 363 5050 email: info @ps2000.ca Website: www.ps2000.ca Mast set up Remove the pole and unwrap
More informationO PEN BIC CLASS RULES
O PEN BIC CLASS RULES The O pen Bic was designed in 2006 by Bic Sport and was adopted as an International Class in 2008. INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2 Abbreviations...
More informationCOMET CLASS MEASUREMENT RULES
COMET CLASS MEASUREMENT RULES 1. INTENTION & INTERPRETATION. a. The intention of the Class Rules shall be to maintain a one-design class in which racing is a true test of sailing skill. The boats shall
More information420 Rigging Guide.
A smaller version of the olympic 470 class, the 420 was formerly a youth development class. It has a good class following, and is a good introduction to performance boats. With a PY number of 1087 it s
More informationRigging Manual DART 16 DART 16 DART 16 RACE. 16 On The Water. 17 Safety Afloat. 10 Mainsail. 14 Your First Sail. 15 Your Dart 16 Capsize Technique
DART 16 DART 16 RACE DART 16 Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Cordage Lengths 4 Sail Number Positioning 5 Building the Hull Platform 6 Trampoline Fitting 7 Rigging & Raising The Mast
More informationASSEMBLY MANUAL. Last up-date : January 2005 HOBIE MAX RACE
ASSEMBLY MANUAL Last up-date : January 005 HOBIE MAX RACE List of the parts Necessary tools spanners nr 7 It is advisable to be at least two people to assemble the Hobie Max pair of niversal pliers TABLE
More informationMUSTO PERFORMANCE SKIFF
INTERNATIONAL MUSTO PERFORMANCE SKIFF CLASS RULES 2008 The Musto Performance Skiff was designed in 1999 by Dr Joachim Harpprecht and was adopted as an International class in 2007. Musto Performance Skiff
More informationRIGGING: RS- Vision. 1. A properly derigged boat appears as below. Please note that the tiller extension is NOT bent.
RIGGING: RS- Vision The RS- Visions should be rigged on the floating dock or on its trailer then put into the water. While rigging, carefully inspect the vessel and equipment to make sure everything is
More informationHADRON H2 CLASS RULES
HADRON H2 CLASS RULES 2018 The Hadron H2 was designed in 2015 by Keith Callaghan and is manufactured under licence by Hadron Dinghies Ltd. INDEX PART I ADMINISTRATION Section A General A.1 Language...
More informationLASER SB3 CLASS RULES
LASER SB3 CLASS RULES 2012 The Laser SB3 was designed in 1999 by Tony Castro and was adopted as a Recognised class in 2007 INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2 Abbreviations...
More informationD-ONE CLASS RULES 2012
D-ONE CLASS RULES 2012 The D One was designed in 2008 by Phil Morrison / Devoti Sailing V 3.4 1 INDEX PART I ADMINISTRATION Section A General A.1 Language...4 A.2 Abbreviations.....4 A.3 Authorities....4
More information3. Sail Kit. Table of Contents: Portland Pudgy Safety Dinghy: 3. Sail Kit
Table of Contents: 3. Sail Kit Sailing the Portland Pudgy... 1 Sailing Tips... 1 Reducing the Sail Area (Reefing the Sail)... 2 Method 1. Reducing Sail without the Exposure Canopy... 2 Method 2. Reducing
More informationRigging the Banshee Sailboat
Rigging the Banshee Sailboat 1 The set-up... I rolled my Banshee "Doozie" into the shade and laid out all the rigging "ingredients." 2. With your boat still sitting on your trailer - or on the beach...
More information2012-June-12 SECOND DRAFT Hobie Getaway Spinnaker Installation Instructions
SECTION A: INTRODUCTION This unofficial set of installation instructions was written for a 2009 Hobie Getaway, using a 2012 Hobie Spinnaker Kit 20999020. Note from the Author: I had never seen this kit
More informationRigging manual SailQube School & Race
Congratulations on the purchase of your SailQube! Please take the time to read through this manual in order to familiarise yourself with your SailQube. If you have any further outstanding questions, please
More informationBOAT CHARTER POLICY. Keppel Bay Sailing Club. Who is Eligible to Charter? Terms and Conditions
POLICY : Boat Charter Policy APPROVED BY : Sailing Committee VERSION : July 2018 REVIEW DATE : July 2019 Who is Eligible to Charter? KBSC sailing members with current sailing membership and recognised
More informationINTERNATIONAL RS FEVA CLASS RULES. Closed class rules for a one-design class.
INTERNATIONAL RS FEVA CLASS RULES 2008 Closed class rules for a one-design class. This version has been updated to reflect the changes to the ERS 2005 2008. Date of this version 05-12-2007 The RS FEVA
More informationOWNER S MANUAL. for Inters and Nacra F-18
OWNER S MANUAL for Inters and Nacra F-18 Tools you ll need: 9/16 socket Wrench Phillips Screwdriver Allen Wrench (included) HULL ASSEMBLY Place hulls boxes approx. 8 feet apart. Make sure both hulls are
More informationMINNOW SAILING ASSOCIATION. RULES OF MEASUREMENT AND CONSTRUCTION (Amended and approved to Aug 2015 by all State Associations)
A. GENERAL Minnow Measurement Rules 2015 MINNOW SAILING ASSOCIATION RULES OF MEASUREMENT AND CONSTRUCTION (Amended and approved to Aug 2015 by all State Associations) (i) The Minnow is a One-design class
More informationThe Lido 14 Class Association presents. Family fun in the Lido 14 and the benefits of Lido 14 Class Association Membership
The Lido 14 Class Association presents Family fun in the Lido 14 and the benefits of Lido 14 Class Association Membership Table of Contents and Helpful Links Like Fun? The definitive family boat, One Design
More informationDOYLE Cradle Cover MANUAL
DOYLE Cradle Cover MANUAL The Doyle Cradle Cover Upon receiving your new Doyle Cradle Cover and before starting actual installation, we recommend laying out your Cradle Cover on a hard surface in a secure
More informationAppendix 1: How To Install the Northeaster Dory Sailing Component Kit Upgrade
Appendix 1: How To Install the Northeaster Dory Sailing Component Kit Upgrade 143 Northeaster Dory Sailing Rig Upgrades: Adding sail track, an outhaul, and camcleats for the jib We ll start with the mast.
More informationVAGO Rigging Manual VAGO VAGO RACE. 1 Glossary. 2 Useful Boat Terminology. 3 Sail Number Positioning. 4 Rigging and Raising the Mast.
VAGO VAGO RACE VAGO Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Sail Number Positioning 4 Rigging and Raising the Mast 5 Boom and Gnav 6 Sails 7 Lower Shroud Tensioning 8 Gennaker 9 Mainsail
More informationHOBIE CAT 16 Easy, Classic, Club & Race
ASSEMBLY MANUAL HOBIE CAT 6 Photo Pierrick Contin Last Update : January 008 HOBIE CAT 6 Easy, Classic, Club & Race HOBIE CAT EUROPE ZI Toulon Est, BP 50 83078 Toulon cedex 9, France Tel : +33 (0)494 08
More informationPARTS - FORWARD. Kayaking + Fishing Parts & Accessories Hook HATCH SEAL "TRIM-LOC" (TOP MOLDED) 5 REQ
PARTS - FORWARD 72104001 Hook 71301001 HATCH SEAL "TRIM-LOC" (TOP MOLDED) 5 REQ 71302001 HULL FLANGE SEAL (pre 2012 ADV) "TRIM-LOC" (SIDE GLUED) 5 REQ 80012001 Pedal Retainer Bungee w/ Hook 84560001 Mast
More informationDevoti Sailing D-Zero Class Rules
Devoti Sailing D-Zero Class Rules The D-Zero was designed by XXX in XXX. Version: Version 1.4 17 th September 2014 INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2 Abbreviations... 4
More informationNotice of Race 2019 Laser Standard Men s World Championship 2-9 July 2019
Notice of Race 2019 Laser Standard Men s World Championship 2-9 July 2019 Venue: Sakaiminato City, Japan Organizing Authority: 2019 Laser World Championships Executive Committee (Host) and the International
More informationBladerider X8 Assembly Help Notes
2.1 Remove All Parts & Have Some Tools Handy Remove all items from the box and identify each part as per the packing sheet and check that nothing is missing. If there is something missing, please email
More informationHobie Island Spinnaker Instructions
Hobie Island Spinnaker Instructions Please read through the instruction manual before using this product. 2 Installation Components 1. 2. 1. Swivel Cam Cleat 2. Mount for Cleat w/ Hardware 3. Padeye w/
More informationODOM CLASS SPECIFICATIONS
ODOM CLASS SPECIFICATIONS Effective March 1, 2004 1. GENERAL 1.1 Purpose of the Measurement Rules 1.1.1 The ODOM is a One-Design Class as defined by the American Model Yachting Association (AMYA). However,
More informationNotice of Race 2015 Laser Masters World Championships July 2015
Notice of Race 2015 Laser Masters World Championships 10-18 July 2015 Venue: Kingston, CANADA Organizing Authority: CORK/Sail Kingston Inc. and the International Laser Class Association (ILCA) 1. RULES
More informationA.3.1 These class rules must be read in conjunction with the RRS.
PART II TECHNICAL SPECIFICATIONS These are editorial changes, not content changes. All my edits are in green. This version is streamlined to show final appearance, but a more detailed version is available.
More informationRig Fittings. PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class). 3.05
26 PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class). 3.05 pw8c PW 8d Turn Buckle 4ba alloy black anod. wire type, less than 1/2 weight of chromed
More informationAMYA SeaWind Class Rules
AMYA SeaWind Class Rules Revised 4/1/2011 1 GENERAL - CLASS: The SeaWind is a one design class. The class objective is competition where the skill of the skipper in sailing and adjusting his boat will
More informationCII Rigging suggestions
CII Rigging suggestions This mini-manual uses photographs of the final prototype sail and the final pre-production mast. Where changes occurred between these and the production units, they are described
More informationSECTION E - RULES OF MEASUREMENT & CONSTRUCTION
SECTION E - RULES OF MEASUREMENT & CONSTRUCTION APPENDIX 'A' of the Constitution of the Sabre Sailing Association of Australia Inc. 1. GENERAL 1.1 Objectives The overarching objective of these Rules is
More informationAMYA SeaWind Class Rules
AMYA SeaWind Class Rules Revised 4/1/2013 1 GENERAL - CLASS: The SeaWind is a one design class. The class objective is competition where the skill of the skipper in sailing and adjusting his boat will
More information2011 PACER CLASS RULES
2011 PACER CLASS RULES Authority: Pacer Australia Pacer Australia Incorporated These Rules are based on the ISAF Equipment Rules of Sailing Page 1 of 19 INDEX Part I Administration Section A - General
More information2011 PACER CLASS RULES
2011 PACER CLASS RULES Authority: Pacer Australia Pacer Australia Incorporated INDEX Part I Administration Section A - General A.1 Introduction A.2 Abbreviations A.3 Authorities, Responsibilities & Administration
More informationRules of the Association Miracle Association Rules of Measurement and Construction MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION
MIRACLE DINGHY RULES OF MEASUREMENT AND CONSTRUCTION 2011 1. GENERAL [a] This is a One Design Class and the object of these rules is to ensure that the Hull form, hull weight, Sail plan and Spars, the
More informationSailboat Manuals Laser
Sailboat Manuals Laser If you are searched for the book Sailboat manuals laser in pdf format, then you have come on to correct site. We present full variation of this ebook in txt, doc, DjVu, epub, PDF
More information2016 Hardware for Mirror 16 Draft as of v1
2016 Hardware for Mirror 16 Draft as of 2016.04.16 v1 Rebuilding the Mirror 16 one piece at a time... My fathers first boat was a Mirror 16 and from that day forward sailing was part of the family. In
More informationNotice of Race 2015 Laser Standard Men World Championship 29 June - 8 July 2015
Notice of Race 2015 Laser Standard Men World Championship 29 June - 8 July 2015 Venue: Kingston, CANADA Organizing Authority: CORK/Sail Kingston Inc. and the International Laser Class Association (ILCA)
More informationPRELIMINARY BAVARIA MATCH 35 INT. CLASS RULES
PRELIMINARY BAVARIA MATCH 35 INT. CLASS RULES 2005 The Bavaria Match 35 was designed in 2003 by J&J Design and was adopted as an international/recognised class in 2005xxxx. INDEX PART I ADMINISTRATION
More informationAUSTRALIAN COBRA CATAMARAN ASSOCIATION RULES AND RESTRICTIONS IMPOSED ON COBRA 5 METRE CATAMARANS AS AMENDED TO JANUARY 1996
AUSTRALIAN COBRA CATAMARAN ASSOCIATION RULES AND RESTRICTIONS IMPOSED ON COBRA 5 METRE CATAMARANS AS AMENDED TO JANUARY 1996 General Revision 1.2 - November 1997 1. By agreement with the designer of the
More information