LaserPerformance NORTH AMERICA 300 Highpoint Avenue Portsmouth, Rhode Island USA t SAIL f
|
|
|
- Lewis Berry
- 5 years ago
- Views:
Transcription
1 LaserPerformance NORTH AMERICA 300 Highpoint Avenue Portsmouth, Rhode Island USA t SAIL f LaserPerformance EUROPE Station Works, Long Buckby Northamptonshire NN6 7PF United Kingdom t +44 (0) f +44 (0) LaserPerformance ASIA Room 3415 China Merchants Tower Shun Tak Centre No Connaught Road Central Hong Kong t f LaserPerformance MIDDLE EAST T5 Middle East LLC Dubai Investment Park po box Dubai, UAE t LASERPERFORMANCE.COM All rights reserved LaserPerformance. LaserPerformance and associated logos are trademarks. Laser, SB3, Sunfish, and Dart are trademarks used under license. LaserPerformance reserves the right to make design and/or specification changes to any of their products as part of their continuous development program. Club 420 Parts Locator
2 91060 Bushing, screw-down Cleat, cam, spinnaker halyard Hiking strap plate Hiking strap set Following items are not shown Centerboard gasket, Dacron (set) Gasket end, plastic V Fastener set for c/b retainer strips Becket roller for deadend Centerboard gasket retainer (set) Centerboard Gasket, mylar, 2" Recessed Centerboard gasket Centerboard & Trunk Hardware Cleat, CB uphaul/downhaul, clam Block, thru-deck Non Skid (set) Spinnaker block, tie lite, 29mm Cleat, cam Wedge, cam back-up (set) Bullseye, large w/stainless steel insert 420 Hull and Deck Cleat, clam Riser, extruded (current) Guy hook w/nut, hook through version (2004 & previous) Guy hook, surface mount (current) Backup rod Block, micro, single Mast step, stainless steel Mast step nut & bolt Bow fittings Bow plate Shackle, bow, 1/4" screw pin Clevis pin, 1/4" w/split ring Clevis pin, 3/16" w/split ring Fastpin, jib tack, 1/4" Clevis pin, 1/4" x 1 1/4" Block, thru deck Rudder Hardware Rudder lift stop Pintle, HD, lower Pintle, HD, upper Eyestrap, 2-hole, large Ports, Plugs, Bailers Inspection port, 5" Bailer, transom ball w/shockcord Plug, Black screwtype (2 pk.) RWO Drain plug, current, Beckson Drain plug assembly, black, RWO Plug, black rubber Grey plug assembly, screw, Holt Allen Drain plug, grey, (Pkg 2) Plug, White Bayonet old style (2 pk.) Mainsheet/Traveler System Block, carbo, single, 40mm Shackle, small w/ 3/16" pin Block, large ratchet Spring, large stand-up Traveler bar end bracket (each) Traveler bar Pin for bridle Eyestrap, large, 2 hole Bridle, spliced for single adjustment Bailer, suction, super medium Bailer handle U-bolt w/ nuts (Current) Backup rod Shroud adjuster, 1/4" w/pins & rings Clevis pin, 1/4" w/split ring Rubrail and Bow Bumpers Rubrail, Heavy duty, vinyl, U-shaped, platinum Rubrail, Vinyl, 30', precut for Bow bumper, 420 JRV, molded Bow bumper, 420 SCV, molded Spinnaker Bag, Blue Fairlead, w/ss insert, for trapeze shockcord Block, micro, check for trap shockcord (not shown) Centerboard pivot bolt assembly 2
3 Junior Race Version Masts Mast, Club 420, JRV, with spinnaker hardware, trapeze gear, running and standing rigging Mast, Club 420, JRV, with spinnaker hardware, trapeze gear, no running or standing riggin Collegiate/Schoolastic Masts Mast, 420 SCV, with running rigging Mast, 420 SCV, without running rigging Shroud Forestay Shackle, small w/ 3/16" clevis pin Trapeze wire, Trapeze donut, black Eyestrap Cleat, horn 420 Spars and Rigging Trapeze wire assembly, 420, Trapeze ring, stainless steel Cleat, trapeze w/roller Masthead w/ sheeve Masthead sheeve Clevis pin Spreader bracket w/ pins Spreaders, airfoil, pair, 16" Spreader tip w/pin & ring Cleat, clam Halyard, jib, wire with tail Single micro block with becket Jib Halyard Shackle Block, cheek, 29mm, carbo Hounds assembly w/bolt & shroud tangs S-hook, topping lift Eyestrap for spin pole Block, bullet single Eyestrap, topping lift block Spinnaker Pole, rigged Spinnaker pole end fitting Outside Shroud Tang Inside Shroud Tang Clevis pin, 3/16" w/ring Hounds, bracket only Shackle w /pin Block, single wire sheave Spinnaker block (limited swivel) Eyestrap, spinnaker halyard block Mast eye, spinnaker pole Long spacer Short spacer Block, micro cheek Plug, mast heel w/tenon Ring for halyard purchase Shroud Adj. w/ pin & rings Clevis pin, 1/4" & Ring Fastpin - optional Gooseneck, (boom side only, complete) Clevis pin, 3/16" w/split ring Boom, club Tack Fastpin, 1/ Gooseneck universal, heavy duty Gooseneck locking fastpin w/ lanyard Eyestrap Bail Clamcleat Pin Only Wire Only Gooseneck, (mast side only) U bracket Bolt, 3/8-16 x 2, ss Washer, 3/8 x 1 x 1/ Gasket Block, carbo Block, micro cheek Bail boom, heavy duty Shackle, 3/16" w/ clevis pin Boom Vang Systems Vang, 16:1 system Block, micro bullet w/becket Shackle, 3/16" twist w/screw pin Block, micro bullet Shackle, 1/4" w/clevis pin & ring Bail, vang, 1/4" round Shackle, 3/16" w/pin & ring SCV Vang Vang, 3:1 system Shackle, d ring Block, micro fiddle w/v-jam, w/o shackle Block, micro bullet w/becket Shackle, 3/16" twist w/screw pin Obsolete Items - Limited Availability Trapeze ring w/line, cleat & shackle - DWG Trapeze wire, w/adj. system (pre 06) - DWG Trapeze handle -DWG 3
4 85206 Tiller, 420, Aluminum, rigged Tiller Extension, 33 inches Universal, Black, Omniflex Extruded 420 rudder head Spacer, threaded, long Rudder Shim Kit, extruded rudder head Bushing, 420 Extruded Rudderhead 420 Blades Pintle, upper, HD, 4 holes Cleat, Clam, black, plastic Stop, rudder Centerboard, Centerboard Pivot Bolt Lanyard, rudder downhaul Pintle, lower, HD, 4 holes Rudder, 420, rigged Centerboard Bushing: Teflon Tube 3/8 ID x 1/2 OD x 7/ Tiller, 420, Aluminum, unrigged Plate Style Rudderhead Parts Items may be limited in quantity Rudder Shim Kit, Plate Rudder Head Gudgeon, 420, on Rudderhead Spacer, threaded, short Spacer, thrubolt, short Rudder Blade, 420 Rudder bushing : Teflon Tube 1/4 ID x 5/16 OD x 7/16 Long Discontinued Items - Unavailable Tiller 420, Oak, rigged w/33 inch extension Tiller 420, Oak, rigged with 36 inch extension Tiller 420, unrigged, wood Rudder head, plate (1 plate) Rudder head, plate style, complete 4
5 83023 Spinnaker Retro Kit SCV to JRV (no sail included) Spinnaker halyard block, limited swivel 420 Retro Kit, Sails & Accesories Spinnaker block, Tie-lite, 29mm Cleat, clam Fairlead Cleat, micro cam Trap wires with adjusters Spinnaker pole ring Bushing, small Block, micro cheek Block, micro single Spinnaker pole Eyestrap Sails Main with Batten Jib Spinnaker w/yellow/green/red stripe, Rasta Spinnaker w/black/yellow stripe, Bzzzz Batten set, Mainsail Batten, top Batten, middle Batten, lower Batten tip, adjustable Sail number, red, individual Sail number, blue, individual Sail number, black, individual Topping lift w/hook Hook, topping lift Foreguy 9 feet of 5mm shockcord Spinnaker sheets 36 feet of 5mm dyneema Spinnaker halard 38 feet of 4mm sprinline Nonskid, 3" Spinnaker bag Guy cleat, clam Guy cleat riser, extruded Guy hook Storm Covers High quality marine polyester - water, mildew and UV resistant fabric Deck cover Deck cover, tent Hull cover Foil bag Accessories Sail bag Bunker, trailer, fiberglass w/carpet Retro kit, 420, SCV to JRV, no sail Protest Flag 5
6 420 Technical Information Hull Weight 230 lbs KG LOA ft 4.24 m Beam 5.50 ft 1.68 m Draft 2.95 ft.090 m Main Sail Area sq ft 7.40 sq m Jib Sail Area sq ft 2.80 sq m Spinnaker Sail Ar 95 sq ft 8.83 sq m Description Diameter (in) Diameter (mm) Type Length Quantity Trapeze Retractor 3/16 in 5mm shockcord 11 ft 1 Centerboard Downhaul 3/16 in 5mm prestretch 4.5 ft 1 Centerboard Uphaul 3/16 in 5mm prestretch 7.5 ft 1 Hiking strap aft tie down 3/16 in 5mm prestretch 4 ft 1 Spinnaker block lines 2mm dyneema 2 ft 2 Vang (4:1) 3/16 in 5mm prestretch 15 ft 1 Vang (16:1) 3mm dyneema Vang Primary 3/16 in 5mm prestretch Hking strap center tie down 5/32 in 4mm prestretch 1.5 ft 2 Hiking strap shockcord 1/4 in 6mm shockcord 4.5 ft 1 Spinnaker bag shockcord 3/16 in 5mm shockcord 2 ft 3 in 1 Painter 5/16 in 8mm prestretch 23 ft 1 Cunningham 3/16 in 5mm prestretch 5 ft 1 Outhaul 3/16 in 5mm prestretch 10 ft 1 Main Halyard 1/4 in 6mm prestretch 40 ft 1 Topping lift 3/16 in 5mm prestretch 30 ft 1 Spinnaker Foreguy 3/16 in 5mm shockcord 8 ft 1 Spinnaker Halyard 5/32 in 4mm prestretch 38 ft 1 Jib halyard tail 1/4 in 6mm prestretch 16 ft 1 Jib halyard wire 3/32 in, 7x19 ss wire 14.5 ft 1 Trapeze wire height adjuster 3/16 in 5mm prestretch 9 ft 1 Mainsheet 5/16 in 8mm braid on braid 28 ft 1 Jibsheet 5/16 in 8mm braid on braid 25 ft 1 Mainsheet Bridle 3mm dyneema 11 ft 1 Spinnaker Sheet 3/16 in 5mm dyneema 36 ft 1 6
Laser Parts Locator LaserPerformance
Laser Parts Locator 52 90660 Laser Sails 9403 - Full rig, rolled, Hyde 9400 - Full rig, folded, Hyde 940 - Full rig, rolled, North 9407 - Full rig, folded, North FULL 95868 RADIAL 89034 95867 95866 4.7
XD Hiking Strap, Main Sheet and Rudder Downhaul System
XD Hiking Strap, Main Sheet and Rudder Downhaul System 1 2 9 6 7 10 XD Hiking Strap, Main Sheet and Rudder Downhaul System 5 8 4 3 Vectran V12 These lines are used extensively throughout the XD system.
Rigging Manual. 1 Parts of the Hull. 2 Parts of the Sail. 3 Sunfish Mast Kit. 4 Bailer Installation. 5 Ratchet Block Installation
SUNFISH SUNFISH RACE SUNFISH Rigging Manual 1 Parts of the Hull Go-fast tip number one: Read this rigging guide first. 2 Parts of the Sail 3 Sunfish Mast Kit 4 Bailer Installation 5 Ratchet Block Installation
SHIELDS PARTS PRICE SHEET
7 Narrows Road * P.O. Box 152 * Wareham, MA 02571-0152 * Phone (508) 295-3550 * Fax (508) 295-3551 www.capecodshipbuilding.com * info@capecodshipbuilding.com SHIELDS PARTS PRICE SHEET Part Number DESCRIPTION
Follow these easy steps to properly assemble your new Zim 420
Thank you for buying a Zim 420 and welcome to the Zim Sailing family. We are extremely proud of the quality of our boats and the race results are proven. Many of the top sailors are choosing Zim over other
SPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area 0 0 RS Feva Foredeck FEV-HF-00 Pozzi pan screw x / FIX-S-P0 Washer M 'A' FIX-W-00 00mm Black Dacron Patch ZDP00 Allen Hatch Inch: Sealing Ring A Pozzi pan screw
SPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area RS Quba Foredeck QUB-FX-00 RS Feva Mast Gate (Post 0 Hex Head Recess) FEV-HF-00 Button head machine screw M x 0 FIX-B-B0 RS Feva / Quba Mast Gate Fastening Bolt
Keel Owners Board / Half Hull Centerboard Owners Board / Half Hull. Tri-Color Masthead Light
Mariner Parts List Mariner Sailboats 40000.000 Mariner Centerboard 50000.000 Mariner Keel Documentation & Awards 47001.000 Mariner Owners Packet 47015.150 Keel Owners Board / Half Hull 47015.250 Centerboard
FDR CHRYSLER 16' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange
Page of 6 Revised 2/0/76 RIGGING INSTRUCTIONS FDR CHRYSLER 6' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange to the new owner, or the new owner is
Rigging Manual V Unpacking and Preparation. Useful knots to know V15. Fogh Marine
V15 V15 Rigging Manual 1 Unpacking and Preparation 2 Assembly 3 Sail Control 4 Launching 1. Unpacking and Preparation Unpack the major parts listed below and lay them out on a soft piece of ground free
J/70 Building Specification
DECK, HARDWARE AND FITTINGS 1 FRP Composite deck 2 Indeck furler unit 3 Bow "U" bolt mooring eye (stainless) Option for one 6" (152mm) mooring cleat in lieu of eye. 4 Shroud chainplates (stainless) (BSI
Club 420 Class Rigging Manual
Club 420 Class Rigging Manual Performance sailcraft 2000 Inc 2555 Dollard Lasalle, Quebec, H8N 3A9 Tel: 514 363 5050 email: info @ps2000.ca Website: www.ps2000.ca Mast set up Remove the pole and unwrap
SPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - ASY Pole & Tack Bar Area 0 0 STF Marine x0mm Clevis Pins and Split Rings ST-O00 RS Quest ASY Spinnaker Pole QUE-SP-00 Gottifredi Maffioli Evolution Race mm: Black KKD0BLK
INSTRUCTION NO
INSTRUCTION NO. 14138 Dagger Rigging Instr. P~e 2.of 6 MODEL 244 CHRYSLER "DAGGER" SAILBOAT RIGGING INSTRUCTIONS We, at Chrysler Boat Corporation, congratulate you on your selection of our Model 244 "Dagger"
Vanguard Sailboats 300 Highpoint Avenue Portsmouth, RI For the dealer nearest you call SAIL
Vanguard Sailboats 300 Highpoint Avenue Portsmouth, RI 02871 For the dealer nearest you call 800. 966.SAIL Unpack the major parts listed below and lay them out on a soft piece of ground free of sharp objects.
extreme stability, speed, & convenience
With the buzz over the SB3 in Europe, it seems poised to take the U.S. market by storm. If you get the chance to take one for a sail, go for it; you ll quickly see why we named the SB3 as our top choice.
Laser Parts Locator LaserPerformance
Laser Parts Locator 52 90660 Laser Sails 9403 - Full rig, rolled, Hyde 9400 - Full rig, folded, Hyde 940 - Full rig, rolled, North 9407 - Full rig, folded, North FULL 95868 RADIAL 89034 95867 95866 4.7
Sailcenter Marina Muiderzand IJmeerdijk AA Almere. T +31 (0) E
Sailcenter Marina Muiderzand IJmeerdijk 18 1361 AA Almere T +31 (0)36 540 88 95 E info@sailcenter.nl www.sailcenter.nl Laser Parts Locator All rights reserved. 2009 LaserPerformance. Laserperformance and
SPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area 7 8 6 0 Allen Hatch Inch: Sealing Ring A8 Allen Hatch Inch: Black A7BLACK Pozzi pan screw 6 x / FIX-S6-P0 Allen Hatch Inch: Black A7BLACK SCK CSK M/SCREW M6 X
OWNER S MANUAL. for Inters and Nacra F-18
OWNER S MANUAL for Inters and Nacra F-18 Tools you ll need: 9/16 socket Wrench Phillips Screwdriver Allen Wrench (included) HULL ASSEMBLY Place hulls boxes approx. 8 feet apart. Make sure both hulls are
Pico rigging manual 2007.doc Page 1 of 28
Pico rigging manual 2007.doc Page 1 of 28 Pico Rigging Instructions The Pico rigging instructions are a guide to rigging your boat. Due to production supplies certain parts may be slightly modified from
TUNE YOUR SAILS SPEED
TUNE YOUR SAILS FOR OUTRIGHT SPEED Rev R05 Important Notes l We recommend not exceeding 350lbs total crew weight as this puts excess stress on the mast and the boat. l When sailing, the boat performs best
Safety Afloat. Before you go sailing:
RIGGING MANUAL Safety Afloat This instruction manual is not a guide to sailing your craft and it should not be considered suitable for the task of learning to sail a boat. Please read the manual before
A.3.1 These class rules must be read in conjunction with the RRS.
PART II TECHNICAL SPECIFICATIONS These are editorial changes, not content changes. All my edits are in green. This version is streamlined to show final appearance, but a more detailed version is available.
1 Parts of the Hull. 2 Parts of the Sail. 3 Sunfish Mast Kit. 4 Bailer Installation. 5 Ratchet Block Installation
SUNFISH SUNFISH RACE SUNFISH Rigging Manual Go-fast tip number one: Read this rigging guide first. 1 Parts of the Hull 2 Parts of the Sail 3 Sunfish Mast Kit 4 Bailer Installation 5 Ratchet Block Installation
Far East Boat Optimist Rigging Instructions
Far East Boat Optimist Rigging Instructions These instructions are written specifically for Far East Boats Championship and Racing Optimist. Parts of the Optimist PAGE 1 Sprit Wind Indicator Sail Mast
ASSEMBLY MANUAL HOBIE CATSY
ASSEMBLY MANUAL HOBIE CATSY HOBIE CAT EUROPE ZI Toulon Est, BP 50 8078 Toulon cedex 9, France Tel : + (0)9 08 78 78 - Fax : + (0)9 08 99 Email : hobiecat@hobie-cat.net - http://www.hobie-cat.net ASSEMBLY
extreme stability, speed, & convenience mark rushall, Yachts & Yachting
It is such a relief to sail a keelboat where one can be entirely independent of marinas, lifts and four wheel drive vehicles! The whole launching process is a straightforward two man job. mark rushall,
RUDDER & TILLER HARDWARE Battlestick Tiller Extensions - Features & Information 77 Battlestick Tiller Extensions 78 Rudder Hardware 79
One of the best parts about working at Ronstan is getting to know the diverse range of sailors that we interact with every day. Whether we are talking to world-class racing sailors, a young newcomer to
Table of content Introduction 5 1. Part 1. Assembly Tools needed for Assembly Glossary Hulls Mounting the beams 7
Table of content Introduction 5 1. Part 1. Assembly 6 1.1. Tools needed for Assembly 6 1.2. Glossary 6 1.3. Hulls 7 1.3.1. Mounting the beams 7 1.3.2. Fixing the mast rotation cleats 8 1.3.3. Placing the
2012-June-12 SECOND DRAFT Hobie Getaway Spinnaker Installation Instructions
SECTION A: INTRODUCTION This unofficial set of installation instructions was written for a 2009 Hobie Getaway, using a 2012 Hobie Spinnaker Kit 20999020. Note from the Author: I had never seen this kit
420 Rigging Guide.
A smaller version of the olympic 470 class, the 420 was formerly a youth development class. It has a good class following, and is a good introduction to performance boats. With a PY number of 1087 it s
2016 Hardware for Mirror 16 Draft as of v1
2016 Hardware for Mirror 16 Draft as of 2016.04.16 v1 Rebuilding the Mirror 16 one piece at a time... My fathers first boat was a Mirror 16 and from that day forward sailing was part of the family. In
ASSEMBLY MANUAL. Last up-date : January 2005 HOBIE MAX RACE
ASSEMBLY MANUAL Last up-date : January 005 HOBIE MAX RACE List of the parts Necessary tools spanners nr 7 It is advisable to be at least two people to assemble the Hobie Max pair of niversal pliers TABLE
International J/24 Class Rules Changes As approved by ISAF Effective 1 st April 2013
Class Rule 3.2.5 International J/24 Class 2012-13 Rules Changes As approved by ISAF Effective 1 st April 2013 The deck shall be fitted with two stanchions on each side, port and starboard, as detailed
Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18. ASSEMBLY MANUAL : HOBIE CAT 14 Std & Race HOBIE CAT 14 STD & RACE
Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18 HOBIE CAT 14 STD & RACE Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 2/18 TABLE OF CONTENT Part list... 3 Ropes and
RIGGING INSTRUCTIONS Let's assume that you have your boat on a trailer when you take delivery from your dealer.
This is the original owner's manual, written about 1972, and applicable for boats manufactured through 1978. Starting in 1979 a few changes were made in the roller furling jib and forestay arrangement.
Bladerider X8 Assembly Help Notes
2.1 Remove All Parts & Have Some Tools Handy Remove all items from the box and identify each part as per the packing sheet and check that nothing is missing. If there is something missing, please email
INTERNATIONAL SUNFISH CLASS ORGANIZATION CLASS RULES
INTERNATIONAL SUNFISH CLASS ORGANIZATION November 2017 CLASS RULES 1. GENERAL The design and development of the Sunfish sailboat was directed to the creation of a one-design class where the true test is
Flying Scot, Inc Parts Price List
1 Part # Description Price ACCESSORIES 690970 Anchor and line - 8 lb. traditional and 100 ft X 5/16 nylon with shackle 110.00 690963 Bailing scoop - flat sided with handle 11.95 690990 Boat fender - large
BEFORE YOU BEGIN TO READ THE WI BEFORE YOU BEGIN TO READ THE WA BEGIN BY READING THIS RIGGING GU
BEFORE YOU BEGIN TO READ THE WI BEFORE YOU BEGIN TO READ THE WA BEGIN BY READING THIS RIGGING GU Nomad Rigging Guide uide to better familiarize yourself with the parts and rigging of. If you have any questions
Dolly wheels in slot #8 for Boat #10.
Rigging: Laser SAIL SELECTION: The International Laser Class has three different official rigs. Each sail is designed for sailors of different weights. The Standard Rig was designed for sailors weighing
STANDARD SPECIFICATIONS
STANDARD & OPTIONS SPECIFICATIONS January 2018 STANDARD SPECIFICATIONS TECHNICAL DATA Length: 5,55 m Width: 2,38 m Light displacement: 500 kg Mainsail area: 14,5 m2 Jib area: 9,2 m2 Gennaker area: 32 m2
Wysiwig - Wayfarer Rigging Guide
Wysiwig - Wayfarer 8767 - Rigging Guide GENERAL NOTES Before you go afloat, make sure that the self-bailer is closed. It is operated through the cut-out in the starboard floorboard. If you do not close
Owner s Manual. Revision Date: Copyright 2012 Falcon Marine LLC 9008 Marlin St. Cape Canaveral, FL USA
Owner s Manual Revision Date: 2013-02-06 Copyright 2012 Falcon Marine LLC 9008 Marlin St. Cape Canaveral, FL 32920 USA 321-799-4841 Falcon Marine LLC Falcon Marine LLC Falcon F18 This manual covers the
HOBIE TEDDY ASSEMBLY MANUAL
ASSEMBLY MANUAL HOBIE TEDDY HOBIE CAT EUROPE ZI Toulon Est, BP 50 83078 Toulon cedex 9, France Tel : +33 (0)494 08 78 78 - Fax : +33 (0)494 08 3 99 Email : info@hobie-cat.net - http://www.hobie-cat.net
The Lido 14 Class Association presents. Family fun in the Lido 14 and the benefits of Lido 14 Class Association Membership
The Lido 14 Class Association presents Family fun in the Lido 14 and the benefits of Lido 14 Class Association Membership Table of Contents and Helpful Links Like Fun? The definitive family boat, One Design
Contents 1. Components Introduction Preparation Hull Foredeck Mast Boom...
Rigging Manual V5 Contents 1. Components...1-6 1.1 - Spars...1 1.2 - Rudder pack...1 1.3 - Rigging pack... 2 1.4 - Rope pack... 3 1.5 - Asymmetrical spinnaker pack... 4 1.6 - Symmetrical spinnaker pack...
Topaz OMEGA Rigging Instructions
Topaz OMEGA Rigging Instructions www.toppersailboats.com TOPAZ OMEGA RIGGING INSTRUCTIONS CONTENTS 02. Introduction 02. Manufacturers Details 03. Maintenance 04. Raising the Mast 05. Attaching the Boom
Rigging Manual DART 16 DART 16 DART 16 RACE. 16 On The Water. 17 Safety Afloat. 10 Mainsail. 14 Your First Sail. 15 Your Dart 16 Capsize Technique
DART 16 DART 16 RACE DART 16 Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Cordage Lengths 4 Sail Number Positioning 5 Building the Hull Platform 6 Trampoline Fitting 7 Rigging & Raising The Mast
The 29er is a strict one design designed in 1997 by Julian Bethwaite
29er Class Rules The 29er is a strict one design designed in 1997 by Julian Bethwaite Section A - Fundamental Rules A.1 Type of Class Rules A.1.1. These are closed class rules. A.1.2. Builders licensed
FARR 280-SPECIFICATION
FARR 280-SPECIFICATION Page 1 of 5 Specifications Length Overall Length Waterline Beam Keel Draft Displacement Keel Weight 8.72 m / 28.6 ft. 8.02 m / 26.3 ft. 2.87 m / 9.4 ft. 2.1 m / 6.89 ft. 1600 kg
2. Note that the ropes from the rigging board are secured in the cam cleats of the jib fairleads.
VII 1. Place the hull, bow into wind, on its trailer, a soft surface, or a rigging board. We strongly recommend making a rigging board; it is simple and inexpensive and greatly simplifies rigging and working
Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet an
By User Manual Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet and Traveler 11. Main Sail 12. Downhaul
WILLEY CAT SHEET B. Daggerboard - 9mm x 2 Daggerboard Ballast - Lead/Epoxy - 6" diameter
WILLEY CAT Willey Cat was designed for performance. The flexible reefing arrangement allows tailoring your sail area to wind conditions. Best with a crew of -. DESIGN FEATURES Flexible Reefing - reefs
PARTS - FORWARD. Kayaking + Fishing Parts & Accessories Hook HATCH SEAL "TRIM-LOC" (TOP MOLDED) 5 REQ
PARTS - FORWARD 72104001 Hook 71301001 HATCH SEAL "TRIM-LOC" (TOP MOLDED) 5 REQ 71302001 HULL FLANGE SEAL (pre 2012 ADV) "TRIM-LOC" (SIDE GLUED) 5 REQ 80012001 Pedal Retainer Bungee w/ Hook 84560001 Mast
Highlander Specifications
Highlander Specifications March 14, 2019 Highlander Specifications The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between these specifications
Laser Class Rules - One Design
One of the attractions of the Laser for most owners is that the class rules are very strict and that the boat is one design. The Laser philosophy incorporated in the rules is that we want to go sailing,
CONTENTS. SB 3 Rigging Instructions
RIGGING MANUAL SB 3 Rigging Instructions The Laser SB 3 rigging instructions are a guide to rigging your boat. Due to production supplies certain parts may be slightly modified from those shown. This instruction
Rigging guide for the Swift Solo Volume 1 (mostly boat rigging)
Rigging guide for the Swift Solo Volume 1 (mostly boat rigging) Thanks to Greg Ryan for the drawing 5/28/2004 1 Index Page 3 Preface and Safety 4 Quick line measurements you ll need 5 Spinnaker pole launcher
VAGO Rigging Manual VAGO VAGO RACE. 1 Glossary. 2 Useful Boat Terminology. 3 Sail Number Positioning. 4 Rigging and Raising the Mast.
VAGO VAGO RACE VAGO Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Sail Number Positioning 4 Rigging and Raising the Mast 5 Boom and Gnav 6 Sails 7 Lower Shroud Tensioning 8 Gennaker 9 Mainsail
Rigging Guide. 1. Unpacking and Preparation: Laser, Radial & Laser Parts of the Laser. 3. Hardware Location. 4. Hardware Installation
LASER 4.7 LASER RADIAL LASER LASER Rigging Guide 1. Unpacking and Preparation: Laser, Radial & Laser 4.7 2. Parts of the Laser 3. Hardware Location 4. Hardware Installation 5. Rigging the Traveler 6. Rigging
1 MAY A division of Rolly Tasker Sails (Thailand) Co Ltd., 84/2 Moo 2, Chaofa Road, T. Vichit, A. Muang, Phuket 83000, Thailand
1 MAY 2011 A division of Rolly Tasker Sails (Thailand) Co Ltd., 84/2 Moo 2, Chaofa Road, T. Vichit, A. Muang, Phuket 83000, Thailand STORAGE FOR SAIL PARTS CNC MACHINE CENTRE 1 1 DEADEYE ID 19 mm. 6C
1 Tuning Platform Reseating Beam Pads Rudder alignment Noisy Foils Rig Tension...
Contents 1 Tuning... 2 1.1 Platform... 2 1.2 Reseating Beam Pads... 2 1.3 Rudder alignment... 3 1.4 Noisy Foils... 3 1.5 Rig Tension... 4 1.6 Mast rake... 4 1.7 Spreader rake... 5 1.8 Diamond tension...
CII Rigging suggestions
CII Rigging suggestions This mini-manual uses photographs of the final prototype sail and the final pre-production mast. Where changes occurred between these and the production units, they are described
Set-up and Tuning Notes: 17 September 2012
Set-up and Tuning Notes: 17 September 2012 This document is being continually updated. Please check the release date above regularly to ensure you have the most recent edition. We appreciate any feedback
INTERNATIONAL. 29er CLASS RULES. The 29er Class was designed in 1997 by Julian Bethwaite and was adopted as an ISAF International Class in 2001.
INTERNATIONAL 29er CLASS RULES 2015 The 29er Class was designed in 1997 by Julian Bethwaite and was adopted as an ISAF International Class in 2001. INDEX PART I ADMINISTRATION Section A General A.1 Language...
Raider 16/Sport - Spinnaker Rigging. Rigging Spinnaker
Rigging Spinnaker Step 1: Run the spinnaker halyard (minimum 52' in length) through the block then back down the mast. Step the mast as you normally would. Step 2: Temporally tie one end of the spinnaker
OPPI Rigging Guide 3/2008
OPPI Rigging Guide 3/2008 McLaughlin Boat Works optistuff.com Thanks for purchasing OPPI, the most durable and F-U-N sailboat available. Rigging your OPPI is easy and the following pictures make it a breeze
INTERNATIONAL 420 CLASS RULES 2013 v2
INTERNATIONAL 420 CLASS RULES 2013 v2 2013 International 420 Class Rules 1 INDEX PART I ADMINISTRATION Section A General A.1 General Information.. 3 A.2 Language... 3 A.3 Abbreviations... 3 A.4 Authorities
HOBIE CAT 16 Easy, Classic, Club & Race
ASSEMBLY MANUAL HOBIE CAT 6 Photo Pierrick Contin Last Update : January 008 HOBIE CAT 6 Easy, Classic, Club & Race HOBIE CAT EUROPE ZI Toulon Est, BP 50 83078 Toulon cedex 9, France Tel : +33 (0)494 08
Introduction. low deck spinnaker launching and retrieval system for quick and easy sail handling to allow the real focus to be on sailing.
Introduction The Farr 280 One Design is a new production racing sailboat by Farr Yacht Design that will deliver the excitement of grand prix racing to the under-30 one design arena. As a modern one design,
THE TRAMP Sailing Manual
THE TRAMP Sailing Manual Reformatted and reprinted December, 1997 Page 11 The TRAMP/EAGLE SAILING MANUAL (the Eagle is the U.S. built version of the Australian built Tramp) Congratulations on owning one
Highlander Specifications (DRAFT UNAPPROVED)
Highlander Specifications March 26, 2014 Highlander Specifications (DRAFT UNAPPROVED) The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between
2. DEFINITION In these Rules, builder means any manufacturer who is licensed to build the BYTE Class sailboat by the Copyright Holder.
By-law 1 of the BYTE Class International Association Constitution 2005 Byte Class Rules Effective March 1, 2005 Revisions to the 2000 Rules are shown in red PART 1 1. OVERRIDING ONE-DESIGN PRINCIPLE The
J. M. R E I N E C K & S O N March 29, 2011
J. M. R E I N E C K & S O N March 29, 2011 HERRESHOFF & HAVEN 12½ HARDWARE LISTS Dear 12½ Builder / Owner / Sailor / Restorer, Thank you for your interest in our products. You have chosen an elegant boat
Table of content Introduction 5 1. Part 1. Assembly 6 1.1. Tools needed for Assembly 6 1.2. Glossary 6 1.3. Hulls 7 1.3.1. Mounting the beams 7 1.3.2. Fixing the mast rotation cleats 8 1.3.3. Mounting
OWNER S MANUAL OWNER'S MANUAL TABLE OF CONTENT. 1. Introduction. 2. EC Documentation a) Certificate of homologation b) Declaration of conformity
OWNER'S MANUAL TABLE OF CONTENT 1. Introduction 2. EC Documentation a) Certificate of homologation b) Declaration of conformity 3. Description a) Hull identification b) Design category c) Technical data
Highlander Specifications
Highlander Specifications July 22, 2012 Highlander Specifications The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between these specifications
INTERNATIONAL TASAR CLASS RULES
INTERNATIONAL TASAR CLASS RULES 2014 The Tasar Class was designed in 1975 by Frank Bethwaite and was adopted as an ISAF Class in 2001. Tasar Class Rules Page 2 of 12 Authority : International Sailing Federation
A Basic Guide to Europe Dinghy Rigging
The Basics: A Basic Guide to Europe Dinghy Rigging Use the smallest blocks available for the line size. Most of the blocks on your boat will be micro blocks. Examine all of your rigging and ensure that
1 Glossary /Useful Boat Terminology. 2 Parts of The Pico/Specifications. 3 Sail Numbers. 4 Rigging the Mast and Cunningham. 5 Raising the Mast
PICO PICO RACE PICO Rigging Manual Glossary /Useful Boat Terminology 2 Parts of The Pico/Specifications 3 Sail Numbers 4 Rigging the Mast and Cunningham 5 Raising the Mast 6 Rigging and Fitting the Boom
Laser Rigging Basics St. Jamestown Sailing Club
Laser Rigging Basics St. Jamestown Sailing Club This rigging guide is intended as a reference of Laser rigging best practices. It is not a substitute for personal instruction and you should attend a Laser
1 Glossary. 2 Useful Boat Terminology. 3 Cordage Lengths. 4 Sail Number Positioning. 5 Building the Hull Platform. 6 Trampoline Fitting
DART 16 DART 16 RACE DART 16 Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Cordage Lengths 4 Sail Number Positioning 5 Building the Hull Platform 6 Trampoline Fitting 7 Rigging & Raising The Mast
HOBIE TEDDY ASSEMBLY MANUAL
ASSEMBLY MANUAL HOBIE TEDDY HOBIE CAT EUROPE ZI Toulon Est, BP 50 83078 Toulon cedex 9, France Tel : +33 (0)494 08 78 78 - Fax : +33 (0)494 08 3 99 Email : info@hobie-cat.net - http://www.hobie-cat.net
Rigging manual SailQube School & Race
Congratulations on the purchase of your SailQube! Please take the time to read through this manual in order to familiarise yourself with your SailQube. If you have any further outstanding questions, please
Telescopic winch handle Speedfriend"
Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;
PEARSON PARTS CATALOG FOR PEARSON 26
PEARSON PARTS CATALOG FOR PEARSON 6 INTRODUCTION PARTS CATALOG Because of the variations in costs, we must advise that there may be changes in retail prices between the published price and the actual selling
Rigging Manual V1 PLEASE FOLLOW RIGGING MANUAL IN THE CORRECT ORDER
Rigging Manual V1 PLEASE FOLLOW RIGGING MANUAL IN THE CORRECT ORDER Contents 1 - Introduction...1 2 - Specification... 2 3 - Components... 3-4 3.1 - Customer pack...3 3.2 - Rope pack (regular)... 4 3.3
RIGGING: RS- Vision. 1. A properly derigged boat appears as below. Please note that the tiller extension is NOT bent.
RIGGING: RS- Vision The RS- Visions should be rigged on the floating dock or on its trailer then put into the water. While rigging, carefully inspect the vessel and equipment to make sure everything is
Rigging Manual. 1 Glossary. 2 Useful Boat Terminology. 3 Cordage Lengths. 4 Sail Number Positioning. 5 Building the Hull Platform
DART 16 DART 16 RACE DART 16 Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Cordage Lengths 4 Sail Number Positioning 5 Building the Hull Platform 6 Trampoline Fitting 7 Rigging & Raising The Mast
F-27 RIGGING GUIDE EXTRACTED FROM ORIGINAL F-27 SAILING MANUAL
F-27 RIGGING GUIDE EXTRACTED FROM ORIGINAL F-27 SAILING MANUAL By Ian Farrier not be possible if the towing vehicle is a van. When trailering, allow extra distance for stopping. Watch also for low bridges,
Tuning Guide January 2012
Tuning Guide January 2012 www.skud.org This tuning guide has been prepared by the IACA SKUD 18 Committee to assist new sailors in the SKUD 18 class to prepare their MkI or MkII boat to a competitive level
Melges 32 59,950. Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs. Builder/Designer Year: 2005
Melges 32 59,950 Builder/Designer Year: 2005 Builder: Soca Sailboats Designer: Reichel/Pugh Construction: Composite Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs Engine Make:
Rigging Manual BUG BUG BUG RACE. 10 Cunningham. 14 Launching and Basic Safety On The Water. 12 Mainsail Reefing. 13 Rowing & Outboard Engine Usage
BUG BUG RACE BUG Rigging Manual 1 Glossary 2 Useful Boat Terminology 3 Parts of the Bug/Specifications 4 Maintenance and Service 5 Sail Numbers 6 Rigging and Raising The Mast 7 Rigging and Fitting The
Hobie Cat Line Guide (page 1 of 5)
Hobie Cat Line Guide (page 1 of 5) HOBIE BRAVO Mainsheet Line 5/16" Spun Braid x 28 1/2 1 ea. Furler Line 3/16" Halyard x 9' 1 ea. HOBIE WAVE Mainsheet Line 5/16" Spun Braid x 35' 1 ea. Downhaul Line 3/16"
INTERNATIONAL. 49er CLASS RULES. The 49er Class was designed in 1995 by Julian Bethwaite and was adopted as an ISAF International Class in 1999.
INTERNATIONAL 49er CLASS RULES 2016 The 49er Class was designed in 1995 by Julian Bethwaite and was adopted as an ISAF International Class in 1999. INDEX PART I ADMINISTRATION Section A General A.1 Language...
49erFX CLASS RULES 2015
49erFX CLASS RULES 2015 49erFX Class Rules Page 1 INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2 Abbreviations... 4 A.3 Authorities & Responsibilities 4 A.4 Administration of the Class
MINNOW SAILING ASSOCIATION. RULES OF MEASUREMENT AND CONSTRUCTION (Amended and approved to Aug 2015 by all State Associations)
A. GENERAL Minnow Measurement Rules 2015 MINNOW SAILING ASSOCIATION RULES OF MEASUREMENT AND CONSTRUCTION (Amended and approved to Aug 2015 by all State Associations) (i) The Minnow is a One-design class
M32 CATAMARAN ASSEMBLY MANUAL
M32 CATAMARAN ASSEMBLY MANUAL 1 M32 CATAMARAN ASSEMBLY MANUAL MANUAL SUMMARY M32 ASSEMBLY Parts and tools Instructions MAST PLATFORM Parts and tools Instructions MAST STEPPING Instructions MAIN HALYARD