Micros cleat range Nylon and Aluminium

Size: px

Start display at page:

Download "Micros cleat range Nylon and Aluminium"

Mark Lester
5 years ago
Views:

Open Cleat Micros cleat range Nylon and Small, neat and lightweight for 1- mm /6-5 /2 rope.

Can be fixed with standard screws and rivets, on tubular or flat surfaces.

Control lines on dinghies (Optimist booms & carbon tillers). Kitesurfing (5th line adjustment).

Ideal when a rope is not always cleated.

rope. Helps hold rope into teeth when a line is flogging.

Side entry Cleat with Becket only Side entry cleats gives the benefit of a fairlead but use of

1 Open Cleat Micros cleat range Nylon and Small, neat and lightweight for 1- mm /6-5 /2 rope. Advanced tooth technology to hold all types of small rope. Can be fixed with standard screws and rivets, on tubular or flat surfaces. Some Applications - Window blinds (cord control). Canoes (seat & rudder lines). Control lines on dinghies (Optimist booms & carbon tillers). Kitesurfing (5th line adjustment). or Nylon Available soon or Nylon. Compact to fit into small locations. Ideal when a rope is not always cleated. Fairlead Cleat or Nylon Fairlead strengthens cleat and allows quick fine adjustments of the rope. Helps hold rope into teeth when a line is flogging. Fairlead Cleat with Becket only Large Becket makes it easy for frequent de-rigging. Side entry Cleat with Becket only Side entry cleats gives the benefit of a fairlead but use of temporary cleating. Tapered Pad allows correct rope/cleating alignment. Cleats can be mounted either way round. Pads can be stacked to increase angle or create a riser block. Backplate provides support on thin deck sections. Allows tensioning without rubbing rope over teeth. Clamcleats Limited Watchmead Welwyn Garden City Hertfordshire AL7 1AP England Telephone Fax sales@clamcleat.com Schiffsausrüster Tel.: +9 (0)

Material Selection Nylon cleats offer very good value for money and are

cleats are unaffected by the heat generated by a rope surging back

appearance as well as offering superior resistance to sea water corrosion.

CL275 CL275AN CL26 CL26W Can be fixed with standard screws and rivets, on

CL277 CL270 CL268 CL268AN CL270AN CL277AN CL278AN Cleats for ropes to mm

Micros CL270 & CL270AN Hard Anodised Racing Micros with Becket CL27 &

Anodised Side entry Racing Micros with Becket (Starboard) CL278 & CL278AN

Pad for CL26, CL268, CL270, CL277 & CL278 A B C mm inch 1 - Nylon A B2 C1

A B2 C1 /6-5 /2 A1 / B 15 /16 C 1 /2 Nylon _ A B2 C1 A1 5 /16 B 15 /16 C

C 9 /16 1 - A B2 C1 /6-5 /2 A1 / B 15 /16 C 9 /16 Polypropylene _ A7 B _

2.2.2.2.2.2.2 # # # # # # # # Gauge No No No No No No No No Gms Ozs 5 0.

2 Material Selection Nylon cleats offer very good value for money and are ideal where high loads or rope surges are not likely to be encountered. cleats are unaffected by the heat generated by a rope surging back through a cleat. Suitable for sub-zero temperatures. Good corrosion resistance. The Hard Anodised (AN) finish gives a high-tech and fashionable appearance as well as offering superior resistance to sea water corrosion. CL27 CL27W Micros cleat range Nylon and Available soon Available soon CL275 CL275AN CL26 CL26W Can be fixed with standard screws and rivets, on tubular or flat surfaces. CL277 CL270 CL268 CL268AN CL270AN CL277AN CL278AN Cleats for ropes to mm ( 5 /2") CL26 & CL26W White Micros CL268 & CL268AN Hard Anodised Racing Micros CL270 & CL270AN Hard Anodised Racing Micros with Becket CL27 & CL27W Open Micros CL275 & CL275AN Open Racing Micros CL277 & CL277AN Hard Anodised Side entry Racing Micros with Becket (Starboard) CL278 & CL278AN Hard Anodised Side entry Racing Micros with Becket (Port) CL82 Tapered Pad for CL26, CL268, CL270, CL277 & CL278 A B C mm inch 1 - Nylon A B2 C1 /6-5 /2 A1 / B 15 /16 C 1 /2 1 - A B2 C1 /6-5 /2 A1 / B 15 /16 C 1 /2 1 - A B2 C1 /6-5 /2 A1 / B 15 /16 C 1 /2 Nylon _ A B2 C1 A1 5 /16 B 15 /16 C 1 /2 _ A B2 C1 A1 5 /16 B 15 /16 C 1 /2 1 - A B2 C1 /6-5 /2 A1 / B 15 /16 C 9 / A B2 C1 /6-5 /2 A1 / B 15 /16 C 9 /16 Polypropylene _ A7 B _ C19 A1 1 /16 B _ C / # # # # # # # # Gauge No No No No No No No No Gms Ozs CL278 CL82.5mm ø 0.1" ø.5mm 0.18".0mm 1.1".0mm 1.7" 2.0mm 0.95" CL26, CL268, CL270 CL277 & CL278 CL27 & CL275 1mm 0.51" CL mm &CL " CL mm 0.72".6mm 0.18" 6mm 0.2" 16mm 0.6" CL26,CL268 CL27&CL275

Mk2 Junior cleat range Nylon and Small, neat and lightweight for - 6mm 1 /8-1 /

Control lines on dinghies. Kitesurfing (Brake Line adjustment).

Helps hold rope into teeth when a line is flogging.

Rope runs free Keeper is closed to stop rope going into cleat teeth 2.

Rope gripped Keeper holds rope in cleat.

cleating at extreme angles. Tapered Pad allows correct alignment.

3 Mk2 Junior cleat range Nylon and Small, neat and lightweight for - 6mm 1 /8-1 / rope. Advanced tooth technology to hold all types of small rope. Can be fixed with standard screws and rivets, on tubular or flat surfaces. Some Applications - Window blinds (cord control). Canoes (seat & rudder lines). Control lines on dinghies. Kitesurfing (Brake Line adjustment). Open Cleat or Nylon Fairlead Cleat or Nylon Compact to fit into small locations. Ideal when a rope is not always cleated. Fairlead strengthens cleat and allows quick fine adjustments of the rope. Helps hold rope into teeth when a line is flogging. Fairlead Cleat with Becket only Becket allows 2:1 rigging. Side entry Cleat only 1. Rope runs free Keeper is closed to stop rope going into cleat teeth 2. Pull rope back and down to cleat Keeper opens to allow rope into teeth. Rope gripped Keeper holds rope in cleat. Lift up to release Keeper opens to allow rope out of teeth Cage allows easy cleating at extreme angles. Tapered Pad allows correct alignment. Cleats can be mounted either way round. Backplate provides support on thin deck sections. Allows tensioning without rubbing rope over teeth. Clamcleats Limited Watchmead Welwyn Garden City Hertfordshire AL7 1AP England Telephone Fax sales@clamcleat.com

4 Material Selection Nylon cleats offer very good value for money and are ideal where high loads or rope surges are not likely to be encountered. cleats are unaffected by the heat generated by a rope surging back through a cleat. Suitable for sub-zero temperatures. Good corrosion resistance. The Hard Anodised (AN) finish gives a high-tech and fashionable appearance as well as offering superior resistance to sea water corrosion. CL20 CL20W Mk2 Junior cleat range Nylon and CL222 CL222AN CL272W CL272 Available soon CL211Mk2 Can be fixed with standard screws and rivets, on tubular or flat surfaces. CL211Mk2/S2 CL218Mk2AN CL211Mk2AN CL211Mk2/S2AN CL217Mk2AN CL217Mk2 CL218Mk2 CL815 CL817 Cleats for ropes to 6mm ( 1 /") CL20 & CL20W White Mini CL211 Mk2 & CL211 Mk2AN Hard Anodised Racing Junior Mk2 CL211Mk2/S2 & CL211Mk2AN/S2 Hard Anodised Racing Junior Mk2 with Becket CL217 Mk2 & CL217 Mk2AN Hard Anodised Side entry (Starboard) CL218 Mk2 & CL218 Mk2AN Hard Anodised Side entry (Port) CL222 & CL222AN Hard Anodised Racing Mini CL272 & CL272W White Nylon Mk2 Junior CL815 Keeper for CL211 Mk2, CL211 Mk2AN, Mk2/S2, CL211 Mk2AN/S2 & CL272 CL817 Cage for CL211 Mk2, CL211 Mk2AN & CL272 Requires CL815 Keeper CL802 Tapered Pad for CL20 & CL222 CL819 Tapered Pad for CL211 Mk2, CL217 Mk2, CL218 Mk2, CL211 Mk2/S2 & CL / / / / _ 1 / / / / A B C mm inch Nylon A52 B6 C17 A2 1 /16 B1 7 /16 C 11 /16 A55 B27 C17 A2 1 /8 B1 1 /16 C 11 /16 A55 B27 C17 A2 1 /8 B1 1 /16 C 11 /16 A55 B27 C17 A2 1 /8 B1 1 /16 C 11 /16 A55 B27 C17 A2 1 /8 B1 1 /16 C 11 /16 A8 B6 C15 A1 7 /8 B1 7 /16 C 5 /8 Nylon A55 B27 C17 A2 1 /8 B1 1 /16 C 11 /16 Acetal A _ B _ C _ Nylon & /2 5/2 5/2 5/2 5/2 5/2 5/2 5/2 Gauge Stainless steel _ A _ B _ C Polypropylene - 6 A 57 B _ C / A2 1 / B _ C 1 /16 5/2 Polypropylene - 6 A60 B27 C / A2 /8 B1 1 /16 C 29 /2 5/2 Gms Ozs CL819 CL802

Tapered Pad allows correct rope/cleating alignment. Mount either way round.

The most innovative accessory is the Keeper (patent pending).

Two full ranges Pads can be stacked to increase angle or create a riser block. Backplate provides under deck support when bolting through thin sections. Supplied with every tapered pad.

Holds rope in teeth under no load or when mounted upside down. Drainage slots. Mount on flat or curved surface. Tested for thousands of cycles under harsh conditions.

Sloping rear automatically guides rope into teeth Rope held securely, even if cleat is mounted under a surface.

5 Tapered Pad allows correct rope/cleating alignment. Mount either way round. Accessories improve cleat performance These accessories expand the capability of a conventional Clamcleat rope cleat while retaining the advantage of not having any moving parts to jam or seize up. The most innovative accessory is the Keeper (patent pending). This has been designed to overcome the problem of lines being cleated accidentally as well as improving the performance of cleats by holding lightly-loaded lines in the jaws of a cleat. Two full ranges Pads can be stacked to increase angle or create a riser block. Backplate provides under deck support when bolting through thin sections. Supplied with every tapered pad. Cage allows easy cleating at extreme angles Wear resistant stainless steel Award winning Keeper automatically prevents unwanted cleating. Lead-in allows easy cleating. Holds rope in teeth under no load or when mounted upside down. Drainage slots. Mount on flat or curved surface. Tested for thousands of cycles under harsh conditions. Pull rope back and down to cleat Lift up to release Rope runs free - Keeper keeps rope out of teeth Pull rope down to cleat. Sloping rear automatically guides rope into teeth Rope held securely, even if cleat is mounted under a surface. CL81 CL816 CL818 CL81 Keeper for CL20, CL211 Mk1, CL211 Mk1AN, CL217 Mk1, CL218 Mk1, CL26 & CL26AN CL816 Cage for CL20, CL211 Mk1, CL211 Mk1AN, CL26 & CL26AN Requires CL81 Keeper CL818 Tapered Pad for CL20, CL211 Mk1, CL217 Mk1, CL218 Mk1, CL26, CL70 & CL70AN / /.8 /16.8 /16 Gauge.8 / 5 No10.8 / 5 No10 5 /16 #10 5 /16 #10 CL815 CL817 CL815 Keeper for CL211 Mk2, CL211 Mk2AN, CL819 CL211 Mk2/S2 & CL211 Mk2AN/S2 CL817 Cage for CL211 Mk2 & CL211 Mk2AN, Requires CL815 Keeper CL819 Tapered Pad for CL211 Mk2, CL217 Mk2, CL218 Mk2 & CL211 Mk2/S / / 5/2 5/2 Gauge /.2 /.2 5/2 5/2 Clamcleats Limited Watchmead Welwyn Garden City Hertfordshire AL7 1AP England Telephone Fax sales@clamcleat.com

Compact to fit into small locations. Ideal when a rope is not always cleated. Large Becket makes it easy for frequent de-rigging.

Compact to fit into small locations. Ideal when a rope is not always cleated. Large Becket makes it easy for frequent de-rigging. Micros cleat range Nylon and Small, neat and lightweight for 1- mm /6-5/2 rope. Advanced tooth technology to hold all types of small rope. Can be fixed with standard screws and rivets, on tubular or flat