Alberg 29 - JEAN DIA

Transcription

1 Alberg 29 - JEAN DIA Year: 1981 Current Price: Can $48, (no trailer included) Located in Caraquet, N.-B. Hull Material: Fiberglass Engine/Fuel Type: Single diesel 1

2 Additional Specs, Equipments and Informations: Boat Name: JEAN DIA Dimensions : LOA: 29 ft 3 in Beam: 9 ft 2 in LWL: 22 ft 4 in Draft: 4 ft 6 in Displacement: 9000 lbs Ballast: 4000 lbs 2

3 Engine: Model: 2QM15 Serial number: Raw water cooled Power: 15 hp Brand: Yanmar (complete rebuild 2015) Type: Inboard Fuel type: Diesel Engine fuel Racors filters (2 filters) with electric 12V filter refuel pump installed over drip pan Transmission: Make-Kansaki-Karl Hurth Model-KBW10 3

4 Construction: Model: Alberg 29 Sloop Sailboat Official Licence Number: Hull #124 Builder-hull: NYE Yachts Hull: Fiberglass Deck: Fiberglass deck covered with Plasteak Marine Grade Decking Bottom: anti-fouling every 2 nd year Full Keel Masthead rigging 4

5 GENERAL DESCRIPTION OF VESSEL: Fiberglass hull sloop with locker forward berth, head, main salon with dinette and quarter berth to port aft cockpit, engine compartment under the aft cockpit sole. Single-handed sailboat with all running lines coming to cockpit. 1 st, 2 ND & 3 RD reefs on mainsail. Hull Exterior of hull and deck with new Alwgrip coating (2010) Recaulked and refastened deck to hull with SS fastener and 5200 marine sealant Deck, cabin top and cockpit covered with Plasteak marine grade decking (2010) Interior cabin floor recovered with Plasdeck vinyl teak look flooring 5

6 New SS 1 shaft with cutlass bearing (2015) Flexible 4 shaft coupling R&D Marine Ltd. (2015) New 3 blades FeatherStream 14 x10 variable pitch (2015) Toerail and fairleads replaced with anodized aluminum (2010) bolted to hull and deck Cabin top grab rail replaced with 1 SS tubing rail Top life line replace with solid 1 SS grab rail from stern to bow welded on top of stanchions bottom lifeline replaced with SS plastic coated Gate stanchion on starboard and port side c/w life line and ladder installed on port side Deck Equipment Brass hub wood steering wheel 6

7 Fender holder Radar mount on mast Edson cockpit consol with folding table Cockpit cushions from C-Cushions 7

8 Rigid Boom Vang (Garhauer Marine) 10 kg Bruce Anchor, 15 chain, 200 rope 10 kg Danforth Anchor with 150 rope Anchor Winch SS Windlass, new motor (2016) remote at helm and at Bow Double anchor roller- 1 st to receive main anchor, 2 nd for Bowsprit Bowsprit installed in 2 nd anchor roller Andersen SS self tailing winches 2-#40, 2-#28, 2-#12 Aluminum Boom and Mast (new SS boom gooseneck installed) Main boom traveler (heavy duty curved track by Garhauer Marine) 8

9 Boom Brake, GYP-EASY New SS boom to mast gooseneck connection fitting 9

10 Wiring and Electrical Sailboat completely rewired with Marine Type cable (2010) 12v DC, 110v AC Main distribution panels in mess and galley 10

11 #1 battery bank 27 dc-al-mpl excide motor starting battery (2015) #2 battery bank agm 12v /250A GEL auxiliary battery (2014) #3 battery bank agm solar instrument battery (for Furuno MFD8 radar chartplotter only) #4 battery bank 12v for Windlass winch and septic tank discharge pump system All batteries are sealed 2000 watts peak 6000w LF pure sine wave power Inverter Charger 12 VDC to 110 VAC (2017) Solar panel FLEX 100 watts ECO S (2016)-used with #3 bank Solar charger controller MPPT 20A (2016)-used with #3 bank Engine Alternator upgrade from 35 amps to 50 amps Sails 150% #1 Genoa like new condition (2005) Doyle inspection (2015) #2 jib very good condition Main sail 1998 very good condition - Doyle inspection installed a 3 rd reef with inspection (2015) 2 nd Main sail very good condition Storm sail - like new condition - Orange wrap to go around the forestay and genoa Spinnaker DRS, very good condition Assymetric - Doyle inspection Spinnaker bag Chutescoops for spinnaker Boom Lazy Bag complete with lazy lines 11

12 Spinnaker pole 12 ft Standing rigging New Profurl C320 Furling System (2016) New ¼ SS Forestay and Backstay (2016) One spare ¼ SS standing rigging for starboard or portside Standing rigging tensioning gauge PT series for ¼ SS All running rigging (rope) are going through SS pulleys by (Garhauer Marine) Navigation Instruments Wind autopilot WindVane by CapeHorn 12

13 MFD8 Furuno multi function display, radar, chartplotter, tachometer and depth sounder Furuno LS4100 fish and depth sounder Furuno F153 depth sounder and tachometer VHF radio: #1-Icom 304, VHF #2 -midland sea ranger 78, 1-handheld VHF STD HX850S Stereo system MXCP25 with speakers inside and at Helm 15 monitoring screen (not connected to any instrument) Compass: 1-4 on pedestal, 1-3 BHD mounted for cockpit at cabin side Bilge pumping system In Keel- 1 cockpit hand pump gph automatic gph automatic Engine raw water cooling pump with transfer valve going to bilge for emergency bilge pumping Safety Equipment 2 5lbs. extinguisher in berth and cockpit and 1-2.5lbs. in galley Flares - all new safety kit replacement from six feet harness tethers with safety hooks One set of Jackline over the cabin top Docking Equipment 1 unit - bumper dock fender 1 unit - 12 dock corner wheel 13

14 3 units - dock fenders 3 units - boat fenders 24 feet of dock edge protection HISTORY OF CHANGES WITH PRESENT OWNER The subject vessel was purchased by the present owner in 2006 and has had major upgrades up to his launch in Continual upgrades were made up to The vessel is comparable to a much newer sailboat as a result of this extensive work. The sailboat was always stored inside in the off sailing season. 14

15 15

16 16

17 17

18 18

19 Some additionnals informations down below were taken from the Sailing Magazine about the Alberg 29 Some changes made by the present owner are written in Bold Letters and underlined 19

20 The Alberg 29 was designed by naval architect Carl Alberg and built by Nye Yachts in Canada from 1976 to The full-keel, masthead sloop was made to replace the much-admired Alberg 30. Nye Yachts built 80 of the rugged sloops between 1976 and The Alberg 29 has proved its mettle over the years. The boat has always exhibited bluewater capability. First Impressions Sailors fond of boats with graceful overhangs are often quick to recognize the work of Carl Alberg, and the Alberg 29 is no exception. It has all the features a sailor dreaming of coastal cruising or setting out on longer passages might want or need. 20

21 A masthead sloop, the boat looks graceful yet solid, and that s precisely because it was built for sailing in heavy weather. It appears balanced, with two large portholes on each side of the cabin and three smaller portholes on each side of the coachroof. Wheel steering, sensible T-shaped cockpit, bow pulpit, sturdy double lifelines and plenty of grab rails on deck contribute to the boat s overall sense of capability. Construction The Alberg 29 was built to exacting standards, and the hull, deck and interior exhibit master craftsmanship. The solid hull is hand-laid fiberglass mat and roving, the deck a sandwich of balsa wood between layers of fiberglass. The boat s lead ballast is encapsulated. All fittings were replaced with SS by present owner. On deck The Alberg 29 is a masthead sloop with aluminum mast and boom. The T-shaped cockpit is roomy enough for four adults while the helmsman stands aft of the destroyer wheel. Double lifelines top lifeline from stern to bow was changed to a solid 1 diameter SS tubing welded on top of stanchions posts and 2 stainless bow pulpit a 2 nd pulpit was added to received the bowsprit. 1 SS tubing is replacing the wood handrails. The boat has a custom made SS deck bow that receive the windlass, chocks and cleats including the two pulpits. Cleats are changed to SS and chocks at the bow, amidship and stern are In anodized aluminum which incorporate the new anodized toerail. The mast and boom are extruded aluminum. The mast is stepped to the keel for strength. All (6) winches were changed to SS Anderson winches. The boat has jib/ genoa track and fairleads. The cockpit shape allows unhampered movement forward by the helmsman when single-handed sailing. The cockpit has large, self-bailing drains and seat locker storage. Belowdecks The galley was laid out for safety. Four bronze-framed, fixed portlights were changed to aluninum-framed oversize portlights and six bronze-frame were covered with boat awlgrip silver paint, opening ports provide light and ventilation, as does a plexiglass opening hatch forward on the coachroof and a 21

22 solar vent was installed over the hatch plexiglass. The boat has no shortage of ventilation down below. The cabin interior is teak and oak, with a teak-and-holly cabin sole. The forward cabin includes a V-berth for two adults, with shelves, drawers and storage in the forepeak. The cabin has a settee and a double berth. Headroom is 6 feet 2 inches. Some additions and modifications were made to the cabinetry The galley has a stainless sink with freshwater pump (electric pump added), insulated icebox. There are lots of drawers, cupboards and a dish rack. The boat carries 30 gallons of fresh water. The head is located to port with a counter sink to starboard, where it shares space with a hanging locker. Engine The original Alberg 29 was fitted with two-cylinder, 15-horsepower inboard Yanmar diesel with reduction gear, water-cooled exhaust, and control panel that is easily accessible from the helm. The engine compartment is large enough to allow servicing. The boat has a 12-gallon fuel tank who was replaced with a polyethylene plastic tank. The hull speed has been estimated at 6.3 knots. Underway The Alberg 29 owners association notes the standard design features a shorter waterline and long counter, which adds speed in both light and heavy air. The owners point out the full keel provides tracking ability and comfort in a seaway, which few other designs can match. According to the 1980 sales brochure from Nye Yachts, the Alberg 29 is a more modern hull with increased stiffness, resulting from firmer bilges, increased beam, and the fact that her fullness is further aft. Additionally, a deeper draft and wider keel lowering the center of the lead ballast by several inches, along with the higher ballast-displacement ratio, contribute to the boat s stability. Owners say the bow is finer than on other designs and the keel more cut away, reducing wetting surface. The beamier hull provides comfort in a seaway. The Alberg 29 is a well-designed, strongly constructed cruising boat that s rich in craftsmanship and known for its bluewater capabilities. 22

23 CONSTRUCTION QUALITY: The Alberg 29s were built by Nye Yachts in Canada. Robustly constructed, they featured hand-laid fiberglass matt and roving throughout the hull, with a laminate design. The mast and boom are extruded aluminum. The mast is stepped to the keel for strength. USER-FRIENDLINESS: Wheel steering is standard, which many owners contend is a plus when sailing short-handed. The full-keel hull is designed for a comfortable ride with a shorter waterline and long counter adding speed in both light and heavy air. SAFETY: Heavy-duty hardware and double lifelines, along with nonskid decks, add to the boat s sense of topside safety. Boat transformation and Upgrade: The main refit was made to this sailboat JEAN DIA from 2006 (year bought by present owner) to 2010 (year launched after main refit). Continuous maintenance and upgrade were done up to

24 24

25 SAILBOAT CONTACT INFORMATIONS FOR ALBERG 29 JEAN DIA Cell: New Brunswick CANADA 25