RIGGING SERVICES AND PRICE LIST
|
|
- Millicent Shields
- 5 years ago
- Views:
Transcription
1 RIGGING SERVICES AND PRICE LIST
2 Mast Stepping RIG 100 FULL SERVICE Build, clean and step rig. Static tune to approx. sailing tension. Rig boom and control lines, run halyards. Make electrical connections at mast base. $18.00/boat ft. + $20.00 materials RIG 103 STEP AND TUNE ONLY Build, clean and step rig. Static tune to approx. sailing tension. Owner then would have to rig boom, control lines, and hook up electrics. $16.00/boat ft. + $20.00 materials RIG 110 STEP ONLY Owner builds mast. Mast stepped with pins only, NO tune, NO tape, NO electrical connections. Owner takes responsibility for all work outside stepping mast. If Crowley s finds it necessary to do additional work in order to step the mast, the owner will be billed accordingly. $14.00/boat ft. +$20.00 materials MIZZEN MAST As above at half boat ft. + $20.00 materials Mast Unstepping RIG 200 FULL SERVICE (Sails must be removed first, see below) Remove boom and control lines, secure halyards to mast, de-pin turnbuckles, disconnect electrics at mast base. Unstep mast, brief inspection of rig, remove spreaders and prepare mast for storage as necessary. $18.00/boat ft. + $20.00 materials RIG 210 OWNER PREPPED Owner must follow Owner Prepped Checklist for unstepping. Crowley s will unstep the mast, perform brief inspection of rig, remove spreaders and prepare mast for storage as necessary. If Crowley s finds it necessary to do additional work to unstep the mast, the owner will be billed accordingly. $60 CYY Credit $18.00/boat ft. + $20.00 materials MIZZEN MAST As above at half boat ft. + $20.00 materials 2
3 Mast Up Winterization (Boats storing Mast-Up Only) Mast Up Winterization RIG Instrument Saver $165 + materials Remove Windex and wind instrument from masthead, place in cabin. In the spring, re-install the windex and instrument, lubricate masthead sheaves, re-tape spreader ends as necessary. RIG HALYARD SAVER $220 + materials Remove halyards from mast, replace with messenger lines. Place halyards in cabin. Re-install the halyards in the spring. Messenger lines left on boat for re-use next winter. RIG INSTRUMENT SAVER + HALYARD SAVER $330 + materials 3
4 Rig Sails and Canvas RIG LOA up to 34ft $140/sail RIG LOA 35 to 40ft $165/sail RIG LOA 41 to 45ft $220/sail RIG LOA 46 to 50ft $275/sail RIG LOA 51ft and up RIG 405 Install Canvas $330/sail $55/item De-rig Sails and Canvas RIG LOA up to 34ft $140/sail RIG LOA 35 to 40ft $165/sail RIG LOA 41 to 45ft $220/sail RIG LOA 46 to 50ft $275/sail RIG LOA 51ft and above RIG 405 Remove Canvas $330/sail $55/item Sail Repair and Cleaning Service RIG 430 Sail Service Remove sails from boat and place on rack for sailmaker to pick up. When sails are returned, to sail rack we take them back to the boat. $110 + loft fees (Does not include rigging/derigging of sails) Loft fees vary per sail for wash/inspection/repair. 4
5 Yacht Hydraulic Systems Service We are factory-trained and authorized to repair and service Sailtec, Navtec, and Selden hydraulics. These hydraulic systems work at high pressures and a damaged or incorrectly installed seal can render the system useless. We have the specialist tools and information necessary to replace seals properly. BACKSTAY ADJUSTERS Backstay adjusters feature a built-in pump. If your hydraulic backstay adjuster is not holding or reaching the desired pressure, or there is a puddle of oil on the deck underneath it, bring it to us for a complete rebuild with new seals. A repair kit may be necessary if the piston rod has been scratched, or if the clevis jaw is seized to the top end of the rod. CYLINDERS Cylinders are operated with a remotely mounted pump and valve. If the cylinder is leaking oil or not holding pressure, new seals are required. A repair kit is necessary if the piston rod has nicks and/or scratches that cannot be polished out. Cylinders are normally charged with air do not try to disassemble one yourself. BOOM VANGS Is your hydraulic boom vang failing to support the boom? The lower end of the vang is charged with Nitrogen gas and over time it can leak. A new set of seals may also be needed. We are able to recharge hydraulic boom vangs as well as replace the seals. (Warning: Vangs are charged with gas to high pressures. Please do not try to disassemble one yourself) PUMPS & VALVES Serviced and repaired. Hydraulic system flush service also available. PRICES VARY DEPENDING ON SIZE AND TYPE. PLEASE CONTACT US FOR FURTHER INFORMATION. 5
6 Standing Rigging and Lifelines Wire Swaging Wire swaging up to 1/2 diameter wire. $35.00/swage Rod Heading Rod heading from 4 to 40 rod. $60.00/cold head Nicopress Swage $15.00/swage Traditional Rigging (Liverpool Wire Splices in 7 x 7 and 7 x 19 Wire Rope) Billed at hourly rate. We stock yacht and architectural fittings from leading manufacturers and can provide timely services. For more information see our section on standing rigging or contact us for more details. 6
7 Winch Service RIG 420 Winch Service $65 per winch speed (2 speed winch = $130)plus parts if needed. Furling System Service RIG 410 Furling System Service (For both headsail furling and mainsail furling systems.) $ an hour plus parts. Some circumstances may require going aloft which will be charged at a higher rate. 7
8 Rigging Inspections and Consultations Rig 700 Level A Visual Deck Inspection At Deck Level With Mast Up General visual inspection of mast and rigging system. Check all fittings & terminations at deck level, halyards, mast base, partners, halyard blocks, chainplates. Check for cracks, corrosion, pitting, rust, broken strands, loose fasteners. Brief report of findings and any work carried out. $110 + parts for minor repairs Rig 701 Level B Visual Inspection Aloft With Mast Up Level A Inspection plus: Inspection of fittings & terminations, spreaders, sheaves, headstay, backstay, lights, furling systems, boom, vang, spinnaker pole/bowsprit, hydraulics, deck hardware. Make any minor repairs as needed. Report with findings and recommendations. $220 + parts for minor repairs 8
9 Rigging Inspections and Consultations Rig 702 Level C Full Inspection With Mast Down Complete disassembly of mast and rigging. Visual inspection of rigging terminals for cracks, corrosion, broken strands, rust. Full inspection of all fittings, sheaves, shrouds, halyards, running rigging, spreaders, furling systems, boom, vang, winches, deck hardware, mast lights. Make minor repairs as needed. Report with findings and recommendations. $330 + parts for minor repairs (Does not include unstepping the mast) Rig 703 Level C + Rod Rigging Level C Inspection plus: Disassembly of all rod terminals, where possible Cleaning and inspection of accessible rod heads with dye penetrate testing Report with findings and recommendations for re-heading or replacing rods as appropriate $880 + parts for minor repairs For boats under 45 feet For boats over 45 ft. please contact us for pricing. 9
10 Pack Mast For Shipping PACK MAST FOR SHIPPING (RIG 000) $110/hr. (Avg. 2-3 hrs.) (Avg. 2-3 hrs.) Materials: $50-$150/mast Build lumber supports for mast on deck: Price varies by boat and variety Pack Boat For Shipping PACK BOAT FOR SHIPPING (RIG 000) $110/hr. (Approx. 4 8 hrs.) Materials: $50-$150/boat 10
11 Cordage and Splicing Charges Double Braid Eye Splice Eye splice for Low-tech double-braid lines, ie. Sta-Set $25.00/splice Core Splice Eye splice for High-tech double-braid lines, ie. Spectra/ Dyneema, Vectran, etc. $25.00/splice Cover Strip Strip cover from the working end of High-tech lines to reduce weight/friction. $40.00/halyard Single Braid Core Splice Eye splice in uncovered single braid line $20.00/splice Core Insertion Extra line added inside to increase line diameter $30.00 Reeving Eye Non load-bearing eye splice in tail of halyard $6.00 Whipping Whipping on rope tail to prevent fraying $6.00 Three Strand Splice $20.00/splice Continuous Line Splice For continuous line drive furlers. $20.00/splice Tail Splice Soft Line to Wire Rope $100.00/splice Splicing charges do not cover the cost of rope or hardware. We stock a full range of cordage for pleasure marine purposes. 11
12 Custom Rigging Crowley s Rig Shop can produce load tested custom fibrous uni-directional rigging that is designed specifically for the loads generated in various applications on your boat. We can also provide you with traditional rigging, Liverpool wire splices, leather and decorative work. All work charged at regular hourly rates. Discount given for larger projects. 12
13 Mooring Bridles Recommended Sizing LENGTH DISPLACEMENT LINE SIZE Up to 25 Less than 5,000 lbs. 5/ Less than 14,000 lbs. 3/ Less than 19,000 lbs. 7/ Less than 24,000 lbs. 1 Pricing LINE SIZE 5/8 3/4 7/8 1 Base price with new hardware $175 $210 $300 $325 Base price with existing hardware $150 $175 $215 $250 Options Sew on Leather Chafe Guards 1 Blue Grey Leather (2) 15 Lengths 7/8 Blue Grey Leather (2) 15 Lengths 3/4 Blue Grey Leather (2) 15 Lengths 5/8 Blue Grey Leather (2) 15 Lengths 1/2 Blue Grey Leather (2) 15 Lengths $3.00 an inch/$90.00 for both lengths BOA CG 1-BG $29.95 BOA CG 78-BG $29.95 BOA CG 34-BG $27.95 BOA CG 58-BG $24.99 BOA CG 12-BG $16.30 We can further customize your mooring bridle to fit your boat or to make less susceptible to chafe. Please contact us with questions. 13
14 Measuring for Your New Mooring Bridle L3 Eye or Cleat Size L2 Measure from the end to beginning of chafe gear. L4 Chafe gear length L1 Overall Length We can further customize your mooring bridle to fit your boat or to make less susceptible to chafe. Please contact us with questions. 14
15 Deck Hardware Installation and Service General Rigging Labor Rig 000 Rigging Labor $110/hr. Rig 300 Man Aloft $220/hr. Rig 010 Harbor Call $130/hr. minimum Rig 010 Harbor Call Man Aloft $260/hr. minimum 15
RIGGING SERVICES AND PRICE LIST
RIGGING SERVICES AND PRICE LIST MAST STEPPING RIG 100 FULL SERVICE Build, clean and step rig. Static tune to approx. sailing tension. Rig boom and control lines, run halyards. Make electrical connections
More informationMASTS AND SAILS. February 2015
RIGGING SERVICES AND PRICELIST 2015 MAST STEPPING FULL SERVICE $14.00/boat ft + $20.00 STEP AND TUNE ONLY $12.00/boat ft + $20.00 STEP ONLY $10.00/boat ft + $20.00 MIZZEN MAST As above at half boat ft
More informationEssential Rig Tuning Guide The Ins and Outs of tuning your mast.
Essential Rig Tuning Guide The Ins and Outs of tuning your mast. Tuning Your Rig The main goal in tuning your mast is to achieve a spar that s straight. By doing this it will help you gain control of sail
More informationInternational J/24 Class Rules Changes As approved by ISAF Effective 1 st April 2013
Class Rule 3.2.5 International J/24 Class 2012-13 Rules Changes As approved by ISAF Effective 1 st April 2013 The deck shall be fitted with two stanchions on each side, port and starboard, as detailed
More informationSail Measurement Form
Sail Measurement Form Yelkenbicer's database of boat rig specifications is extensive and in most cases, no further information is required to prepare a sail. However, if your boat's rig is custom or has
More informationJ/70 Building Specification
DECK, HARDWARE AND FITTINGS 1 FRP Composite deck 2 Indeck furler unit 3 Bow "U" bolt mooring eye (stainless) Option for one 6" (152mm) mooring cleat in lieu of eye. 4 Shroud chainplates (stainless) (BSI
More informationFARR 280-SPECIFICATION
FARR 280-SPECIFICATION Page 1 of 5 Specifications Length Overall Length Waterline Beam Keel Draft Displacement Keel Weight 8.72 m / 28.6 ft. 8.02 m / 26.3 ft. 2.87 m / 9.4 ft. 2.1 m / 6.89 ft. 1600 kg
More informationMast Assembly Manual. for
Mast Assembly Manual for J 44 Hall Spars 1 Introduction MAST ASSEMBLY MANUAL Welcome to the Hall Spars owners family. Our spars are designed for strength, function, and reliability. Please read this assembly
More informationIntroduction. low deck spinnaker launching and retrieval system for quick and easy sail handling to allow the real focus to be on sailing.
Introduction The Farr 280 One Design is a new production racing sailboat by Farr Yacht Design that will deliver the excitement of grand prix racing to the under-30 one design arena. As a modern one design,
More informationMKIII JIB REEFING & FURLING
MKIII JIB REEFING & FURLING MKIII OFFSHORE BOATS 22' - 100'+ (7 m - 30 m+) JIB REEFING & FURLING MKIII jib reefing and furling systems are modern and elegantly styled. Constant refinements to these dependable,
More informationKeel Owners Board / Half Hull Centerboard Owners Board / Half Hull. Tri-Color Masthead Light
Mariner Parts List Mariner Sailboats 40000.000 Mariner Centerboard 50000.000 Mariner Keel Documentation & Awards 47001.000 Mariner Owners Packet 47015.150 Keel Owners Board / Half Hull 47015.250 Centerboard
More informationJ/70 Owners Spar Package Info Pack V.4. Owners Spar Package Info Pack 2014/15
Owners Spar Package Info Pack 2014/15 TABLE OF CONTENTS: Introduction Care Wash down Paint Scratches Travel Storage Mastbase Maintenance General Notes Rig Inspections Regular Monthly Bi -Annual Sailmakers
More informationCOASTAL IN-BOOM FURLING SYSTEM. Installation Manual
COASTAL IN-BOOM FURLING SYSTEM Installation Manual 1 TABLE OF CONTENTS Page Number 3. Disclaimer 4. Components packing list & required tools 5. Gooseneck bracket location 6. Installation sail track 7.
More informationASTA/USCG Rig Inspection Checklist To be edited for application for specific vessels I. Introduction
American Sail Training Association 29 Touro Street, PO Box 1459 Newport, RI 02840 USA Tel: 401-846-1775. Fax: 401-849-5400 Email: asta@sailtraining.org Website: www.sailtraining.org ASTA/USCG Rig Inspection
More informationOPERATIONAL CHECK LIST
www.spinnakersailing.com (650) 363-1390 OPERATIONAL CHECK LIST https://twitter.com/#!/spinnakersailin http://www.facebook.com/spinnakersailingrwc http://www.spinnakersailing.com/newsletter.html Dear Sailor,
More information2. Note that the ropes from the rigging board are secured in the cam cleats of the jib fairleads.
VII 1. Place the hull, bow into wind, on its trailer, a soft surface, or a rigging board. We strongly recommend making a rigging board; it is simple and inexpensive and greatly simplifies rigging and working
More informationTelescopic winch handle Speedfriend"
Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;
More informationCATALINA 34 FURLING MAST HAND BOOK
CATALINA 34 FURLING MAST HAND BOOK MADE BY CHARLESTON SPAR 3901 PINE GROVE CIRCLE CHARLOTTE, NC 28206 (704) 597-1502 FAX (704) 597-0961 WWW.CHARLESTONSPAR.COM MAST FURLING SECTION F560-E 2 1 1 PVC 1 TO
More informationMANUAL REEFING SYSTEMS
MANUAL REEFING SYSTEMS Reliability > Performance > Robustness PROFURL offers a comprehensive range of manual headsail furlers. With its Cruising and Racing models, PROFURL is able to match the expectations
More informationTopaz OMEGA Rigging Instructions
Topaz OMEGA Rigging Instructions www.toppersailboats.com TOPAZ OMEGA RIGGING INSTRUCTIONS CONTENTS 02. Introduction 02. Manufacturers Details 03. Maintenance 04. Raising the Mast 05. Attaching the Boom
More informationCATALINA 350 FURLING & STANDARD MAST HAND BOOK
CATALINA 350 FURLING & STANDARD MAST HAND BOOK MADE BY CHARLESTON SPAR 3901 PINE GROVE CIRCLE CHARLOTTE, NC 28206 (704) 597-1502 FAX (704) 597-0961 WWW.CHARLESTONSPAR.COM MAST FURLING SECTION F560-E 2
More informationF-27 RIGGING GUIDE EXTRACTED FROM ORIGINAL F-27 SAILING MANUAL
F-27 RIGGING GUIDE EXTRACTED FROM ORIGINAL F-27 SAILING MANUAL By Ian Farrier not be possible if the towing vehicle is a van. When trailering, allow extra distance for stopping. Watch also for low bridges,
More informationMAST RAISING AND LOWERING
MAST RAISING AND LOWERING If you are the owner of a sailing boat, there will come a time when the mast has to be lowered and raised whether for maintenance or to adhere to hard standing rules. There is
More informationMelges 32 59,950. Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs. Builder/Designer Year: 2005
Melges 32 59,950 Builder/Designer Year: 2005 Builder: Soca Sailboats Designer: Reichel/Pugh Construction: Composite Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs Engine Make:
More informationSAILTEC, INC CONGER COURT, OSHKOSH, WI USA
OK to make this valve hand tight. Pin Mount Style Integral lies 4-5 Degrees above Horizontal. If you store your Hunter "bow down" you will get air-lock in the Integral. Slot Mount Style Pump Body "Down"
More informationSymptom: The basic symptom is your sail will not roll in or out without force. The drum unit is hard to turn. Your sail will not roll out on its own.
Schaefer 2100 roller furler drum replacement on Catalina 320 Danny Jensen, A BOA VIDA hull #972, Thanks to contributions Chris Burti, Jeff Hare and C320 group for comments Photos were taken and edited
More informationSchaefer recognized this issue and they offer to replace the drum bearing assembly for $
Schaefer 2100 roller furler drum replacement on Catalina 320 Danny Jensen, A BOA VIDA hull #972, Thanks to contributions Chris Burti, Jeff Hare and C320 group for comments Photos were taken and edited
More informationM32 CATAMARAN ASSEMBLY MANUAL
M32 CATAMARAN ASSEMBLY MANUAL 1 M32 CATAMARAN ASSEMBLY MANUAL MANUAL SUMMARY M32 ASSEMBLY Parts and tools Instructions MAST PLATFORM Parts and tools Instructions MAST STEPPING Instructions MAIN HALYARD
More informationSchaefer s New Mainsail Furler Answers All Your Questions
Boom Furler FAQ s Schaefer s New Mainsail Furler Answers All Your Questions Q: Why put a mainsail furler on your boat? A: Contemporary mainsail furlers allow you to: Shorten sail without leaving the safety
More informationFALL 2017 SERVICES & PRICING GUIDE
Name: Boat Name: Address: Powerboat / Sailboat (circle one) City: ST: Zip: Cell/Contact Phone: Office/Second Phone: Email: Manufacturer: Model: Yr Length: Beam: Draft: Key Loc: Combo: Scheduling Reservation
More informationFLEXIBLE FURLER 4/6 INSTALLATION / OPERATING INSTRUCTIONS
FLEXIBLE FURLER 4/6 INSTALLATION / OPERATING INSTRUCTIONS 44 James Street, Homer, NY 13077 Tel. 607 749 4599 Fax 607 749 4604 Website: www.sailcdi.com Updated July 2006 WARNINGS READ BEFORE INSTALLING
More informationCR 914 Class Rules. Revised July 15, 2000 See also CR-914 Class Rule Interpretations
CR 914 Class Rules Revised July 15, 2000 See also CR-914 Class Rule Interpretations 1 GENERAL - CLASS: The CR 914 is a One-Design class. The Class objective is that the sailing skills of the skipper shall
More informationKeiser Marine. Surveying and Consulting 150 Laidley St. Suite #1 San Francisco, CA keisermarine.com (253) RIGGING SURVEY.
Keiser Marine Surveying and Consulting 150 Laidley St. Suite #1 San Francisco, CA keisermarine.com (253) 249-1914 RIGGING SURVEY 1975 Islander 36 UN-IDENTIFIED SAILING VESSEL Page 1 of 13 REPORT OF RIGGING
More informationSHIELDS PARTS PRICE SHEET
7 Narrows Road * P.O. Box 152 * Wareham, MA 02571-0152 * Phone (508) 295-3550 * Fax (508) 295-3551 www.capecodshipbuilding.com * info@capecodshipbuilding.com SHIELDS PARTS PRICE SHEET Part Number DESCRIPTION
More informationBoatSmith Wharram Ariki 48 Performance Cruising Catamaran v1 Specifications
BoatSmith Wharram Ariki 48 Performance Cruising Catamaran v1 Specifications David Halladay BoatSmith Inc. info@boatsmithfl.com 561.632.2628 15 March 2013 LOA: 48 ft 2 in BOA: 22 ft LWL: 41 ft 6 in Weight:
More informationJ70 Tuning Guide. Jud Smith Seldon Mast
J70 Tuning Guide Jud Smith OneDesign@doylesails.com www.doylesails.com/onedesign/j70 Install trim marks on the spreaders at the mid-point aligned with the center of the hull. We like the one single spreader
More informationCatalina 37 One Design
Catalina 37 One Design Handbook and Class Rules Long Beach Sailing Foundation PO Box 3116, Long Beach, CA 90803 www.lbsailingfoundation.org Catalina 37 One Design Class Constitution ARTICLE I Name The
More informationNew Product Update - September 2017
New Product Update September 2017 Series 1 Ball Bearing Utility Blocks Available Now With a sheave diameter of 1mm these are the smallest and lightest ball bearing blocks available! The single block delivers
More information"Fomo" is a highly competitive Farr 280 which has recently had success in the UK's Farr 280 circuit, as well as the HP30 class.
Farr 280 FOMO Year: 2015 Current Price: 136,000 USD Location: Cowes, Isle of Wight, United Kingdom Hull Material: E-glass/epoxy/Corecell M-Foam "Fomo" is a highly competitive Farr 280 which has recently
More informationTUNE YOUR SAILS SPEED
TUNE YOUR SAILS FOR OUTRIGHT SPEED Rev R05 Important Notes l We recommend not exceeding 350lbs total crew weight as this puts excess stress on the mast and the boat. l When sailing, the boat performs best
More informationTECHNICAL DESCRIPTION MASTHEAD SLOOP:
NEW SAILOR TECHNICAL DESCRIPTION MASTHEAD SLOOP: What is a masthead sloop?.page 2 Parts and function of the masthead sloop sail... Page3 Parts and function of the masthead sloop rigging Page 4 Parts and
More informationRUDDER & TILLER HARDWARE Battlestick Tiller Extensions - Features & Information 77 Battlestick Tiller Extensions 78 Rudder Hardware 79
One of the best parts about working at Ronstan is getting to know the diverse range of sailors that we interact with every day. Whether we are talking to world-class racing sailors, a young newcomer to
More informationSail Trimming Guide for the Beneteau 373
INTERNATIONAL DESIGN AND TECHNICAL OFFICE Sail Trimming Guide for the Beneteau 373 March 2004 Neil Pryde Sails International 354 Woodmont Road #18 Milford, CT 06460 Phone: 203-874-6984 Fax: 203-877-7014
More informationForestay fittings and halyard routing
Festay fittings and halyard routing Cutter stay on masthead rigs On fractional rigs the festay fitting is either fitted directly on to the mast combined with the halyard box (Seldén combi boxes). The festay
More informationMUSTO PERFORMANCE SKIFF
INTERNATIONAL MUSTO PERFORMANCE SKIFF CLASS RULES 2008 The Musto Performance Skiff was designed in 1999 by Dr Joachim Harpprecht and was adopted as an International class in 2007. Musto Performance Skiff
More informationRhodes 19 Tuning Guide
Rhodes 19 Tuning Guide Jud Smith jsmith@doylesails Tomas Hornos tomas@doylesails.com Send order forms to: onedesign@doylesails..com SETTING UP YOUR RHODES 19 FOR DOYLE SAILS BEFORE STEPPING THE MAST 1.
More informationThe 4th generation of an icon
104S 204S 304S 404S The 4th generation of an icon For carefree sailing The fourth generation of is an uncompromising evolution of the world s best selling jib furling and reefing system. Proven design
More informationQuikVang. The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL D-30 MODEL D-40
QuikVang The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL D-30 MODEL D-40 33 Broadcommon Road, Bristol, RI 02809 USA T: 401.253.4858 F: 401.253.2552 www.hallspars.com 1
More informationMUSTO PERFORMANCE SKIFF
INTERNATIONAL MUSTO PERFORMANCE SKIFF CLASS RULES 2012 The Musto Performance Skiff was designed in 1999 by Dr Joachim Harpprecht and was adopted as an International class in 2007. Musto Performance Skiff
More informationMelges 24 Sailing Guide
RACING GUIDES www.ullmansails.com Upwind Sailing Melges 24 Sailing Guide The Melges is most efficient when sailed as flat as possible. Excessive heel causes leeway which is slow. The skipper must work
More informationPremium PowerPoint Presentation. Rigging Review
Premium PowerPoint Presentation Rigging Review Chapter 1 Hoisting Safety Review: What about the CG Symmetrical vs. Asymmetrical Balanced and Unbalanced Lifting Lug Hooks Angle Deformation Safety Gates
More informationU.S.SPARS. Operational Manual
US SPARS is a part of group Z-Spars, the world s largest spar builders. From a small shop in Paris making bows and arrows to the largest spar producing group on the planet, the Z-Spars Group is now at
More informationKeel-stepped and deck-stepped masts,
Keel-stepped and deck-stepped masts, C-sections and F-sections The T-base and deck ring systems are made to fit both Seldén s conventional mast sections and their matching furling sections. They are also
More informationClassic Crosby Wianno Senior in excellent condition. Just launched for the 2018 season SALTWORKS is ready to go to her next owners
http://www.yachtworld.com/brooklin Brooklin Boat Yard - John Maxwell P.O. Box 143 Brooklin, ME 04616, United States Tel: 207-359-2193 Tel: 207-387-8383 Fax: 207-359-8871 brokerage@brooklinboatyard.com
More informationOH MARINE EQUIPMENT made to last
OH Fairlead thimbles (round) OH Marine Equipment has made a new product: OH fairlead thimbles (round). The thimbles can be spliced into control lines and are used to deflect sheets and control lines or
More informationLuxury Lines. The X4 offers an easily handled package, ideal for double handed sailing. 2 X-YACHTS X4 X-YACHTS X4 3
Luxury Lines The X4 is the second model in a new range, aimed at the discerning sailor and his crew. It utilises advanced, proven technology and build techniques which only incorporate first class components,
More informationBob Perry Custom 32 Wood N Wind
Bob Perry Custom 32 Wood N Wind Make: Bob Perry Model: Custom 32 Length: 32 ft Price: $ 35,000 Year: 2002 Condition: Used Location: Seattle, WA, United States Boat Name: Hull Material: Draft: Number of
More informationIntroducing the new Farr 25 OD Built by OD Yachting
Introducing the new Built by OD Yachting... e n g i n e e r e d f o r p e r f o r m a n c e w i t h s u p e r i o r h a n d l i n g Specs LOA LWL Beam Draft Displ Ballast 7.62 m 6.96 m 2.47 m 1.80 m 930
More informationFurlex 104S-404S (Standard)
104S-404S (Standard) The 4th generation of an icon The fourth generation of is an uncompromising evolution of the world s best selling jib furling and reefing system. Proven design blended with innovation
More informationCarbo Racing Foil Instruction Manual Unit 0, 1, 2, 3
Carbo Racing Foil Instruction Manual Unit 0, 1, 2, 3 WARNING!: Strictly follow all instructions to avoid an accident, damage to your vessel, personal injury or death. See www.harken.com/manuals for additional
More informationPT Series Tension Gauges
PT Series Tension Gauges Model PT-1 Cable size 3/32", 1/8", 5/32" Model PT-1M Cable size 2.5mm, 3mm, 4mm Model PT-2 Cable size 3/16", 7/32", 1/4" Model PT-2M Cable size 5mm, 6mm, 7mm Model PT-3 Cable size
More informationFollow these easy steps to properly assemble your new Zim 420
Thank you for buying a Zim 420 and welcome to the Zim Sailing family. We are extremely proud of the quality of our boats and the race results are proven. Many of the top sailors are choosing Zim over other
More informationWinchline n a box WINCH LINE SELECTION GUIDE. Wire Rope Winchlines are superior to most other winchlines found in the market place due to the
Winchline n a box Wire Rope Winchlines are superior to most other winchlines found in the market place due to the eye) end terminations. Each eye is protected by a steel liner (thimble) to guard against
More informationA.3.1 These class rules must be read in conjunction with the RRS.
PART II TECHNICAL SPECIFICATIONS These are editorial changes, not content changes. All my edits are in green. This version is streamlined to show final appearance, but a more detailed version is available.
More informationChesapeake Tartan 30 Association
Chesapeake Tartan 30 Association MAST PUMPING & TARTAN 30 BABY STAY* John D. Connor, T-30 #142, writes: When the boat is tied up at the dock, and the wind is abeam, the mast starts vibrating ( pumping
More informationQuikVang. The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL A-8 MODEL A-12
QuikVang The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL A-8 MODEL A-12 33 Broadcommon Road, Bristol, RI 02809 USA T: 401.253.4858 F: 401.253.2552 www.hallspars.com 1 INTRODUCTION
More informationReckmann Furling Systems
Reckmann Furling Systems A+ Rigging Official Reckmann distrubitor Reckmann manual furlers Above Deck MF elow Deck MF/DF The manual furling systems of the MF series are the continuation of a long tradition
More informationNorth Sails Seattle Thunderbird Tuning Guide
Page 1 of 6 North Sails Seattle Thunderbird Tuning Guide Introduction The following tuning guide is meant as a good starting point in setting up your boat. Since not all Thunderbirds are exactly alike
More information2015 J/105 Tuning Guide
2015 J/105 Tuning Guide paulbeaudin@doyleplochsails.com Introduction The J105 has become the success story of one design racing in the new millennium. With over 680 boats built to date, the class is the
More informationSold!!! info First 40 Teknova
Sold!!! info First 40 Teknova Name: Teknova. Condition: Excellent. Location: West coast of Sweden. Model: First 40 Hull # 70. Year built: 2010. Type yacht: Cruiser-Racer. Designer: Farr Yacht Design, Ltd.
More informationMERIT 25 CLASS RULES ARIZONA YACHT CLUB ( AYC ) ONE-DESIGN FLEET. Effective January 1, 2006
MERIT 25 CLASS RULES ARIZONA YACHT CLUB ( AYC ) ONE-DESIGN FLEET Effective January 1, 2006 I. PURPOSE The purpose of these Rules is to maintain the one-design character of the Merit 25 while allowing for
More informationSet-up and Tuning Notes: 17 September 2012
Set-up and Tuning Notes: 17 September 2012 This document is being continually updated. Please check the release date above regularly to ensure you have the most recent edition. We appreciate any feedback
More informationSAILING INSTRUCTIONS
CORNERSTONE CUP St. Francis Yacht Club October 1-4, 2015 SAILING INSTRUCTIONS 1. RULES 1.1 The regatta will be governed by the rules as defined in The Racing Rules of Sailing (RRS) including Appendix D.
More informationFarr 30 / Mumm 30. Reference ID. Beam (mtr) Mast completely new (Southern Spars) incl. Spreaders => newest Mast in the Farr 30 class.
www.racing-yachts.com contact@racing-yachts.com Farr 30 / Mumm 30 39,995 VAT included General Reference ID Displacement (Kg) 221 2063 REFIT IN 2013 Builder / Designer Beam (mtr) Mast completely new (Southern
More informationCII Rigging suggestions
CII Rigging suggestions This mini-manual uses photographs of the final prototype sail and the final pre-production mast. Where changes occurred between these and the production units, they are described
More informationwww.navtec.net info@navtec.net Introduction The importance of routine maintenance is critical, and a well-run yacht is defined by the amount of time and effort spent on the care and monitoring of its systems.
More informationOver Deck Control Lines V1
Over Deck Control Lines V1 1 - Pack Contents Downhaul control line Outhaul control line Downhaul takeup elastic 3 x 30mm block Traveller line (with pre-spliced loop) 2 x Side deck strops 2 x Ronstan Shocks
More informationTUNE YOUR SAILS SPEED. Viper 640 Tuning Guide. Rev. R03b
TUNE YOUR SAILS FOR OUTRIGHT SPEED Mast Tuning Tuning Guide for the Carbon Mast SET SPREADER ANGLE Check spreader angle by placing a straightedge or string from shroud to shroud at the spreaders. Measure
More informationFLYING SAIL FURLERS. nex : The new generation of flying sail. furlers from Profurl
FLYING SAIL FURLERS nex : The new generation of flying sail furlers from Profurl Fast, safe and easy flying sail hoisting, and improved boat performance: this is what Profurl offers you with its range
More informationSetup &Tuning guide. Updated 1st February 07
Setup &Tuning guide Updated 1st February 07 Boat preparation Tape a piece of batten to the backstay ram with a calibrated scale drawn on it. This will allow you to reproduce the same backstay settings
More informationTUNE YOUR RIG FOR OUTRIGHT SPEED. J/88 Tuning Guide Solutions for today s sailors
TUNE YOUR RIG FOR OUTRIGHT SPEED 2 We hope you enjoy your J/88 Tuning Guide. North class representatives and personnel have invested a lot of time to make this guide as helpful as possible for you. Tuning
More informationSKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST
SKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST AIRGLAS MANUAL NO. L 44000-105 FOR SKI SERIAL NO. S 1 THRU 1000 AIRGLAS MODEL L 44000-11 FSN 1630-912-3166 SKI
More informationBasic Keelboat Sailing Standard (ASA 101)
Basic Keelboat Sailing Standard (ASA 101) Prerequisites: None General Description: Description: Demonstrated ability to skipper a sloop-rigged keelboat of approximately 20 to 27 feet in length by day in
More informationYacht Rope Solutions
Yacht Rope Solutions LIROS - Rosenberger Tauwerk LIROS - Ropemakers For XTReme Solutions LIROS XTReme range has confirmed that it is today the best solution both for blue water XTReme racing, championship
More informationThe M242 is a relatively easy boat to sail and the fleet has taken steps to make the boats as even as possible.
Tuning Guide October 2005 Dear M242 Sailors, The M242 is a relatively easy boat to sail and the fleet has taken steps to make the boats as even as possible. This tuning guide was written as a reference
More informationFitting Instructions For Slab Reefing Kit Part No For Yachts Up To 8.5m (2 Reefing Points)
Fitting Instructions For Slab Reefing Kit Part No 41483 For Yachts Up To 8.5m (2 Reefing Points) This system makes reefing your mainsail a quick and easy operation. Just lower the mainsail just below a
More informationASSEMBLY MANUAL. Last up-date : January 2005 HOBIE MAX RACE
ASSEMBLY MANUAL Last up-date : January 005 HOBIE MAX RACE List of the parts Necessary tools spanners nr 7 It is advisable to be at least two people to assemble the Hobie Max pair of niversal pliers TABLE
More informationBeneteau First 40.7 and 47.7 Tuning Tips
Beneteau First 40.7 and 47.7 Tuning Tips When the design office of Bruce Farr and Associates started their relationship with Beneteau, few observers would have believed the success and popularity that
More informationPelagic Sailing Club Membership Application
Pelagic Sailing Club Membership Application For club use only Ck# Amt $ Date Crew Boat Owner Skipper Last Name First Name Spouse s name: Mailing Address City State Zip Phones: Home Work: Ext Cell: E-Mail
More informationJ/88, J/Boats, 8.90 m (29.19') J/Boats photos HEADSAIL HANDLING SYSTEMS
J/88, J/Boats, 8.90 m (29.19') J/Boats photos HEADSAIL HANDLING SYSTEMS Carbo Racing Foil The engineering resins in these strong, lightweight head foils offer significant advancements over the weaker PVC
More information420 Rigging Guide.
A smaller version of the olympic 470 class, the 420 was formerly a youth development class. It has a good class following, and is a good introduction to performance boats. With a PY number of 1087 it s
More informationSKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST
SKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST AIRGLAS MANUAL NO. L 44000-105 (Rev C) FOR SKI SERIAL NO. S 1 THRU 1000 AIRGLAS MODEL L 44000-11 FSN 1630-912-3166
More informationWhisker Poles Art Bandy 10/12/06
Whisker Poles Art Bandy 10/12/06 Why a Whisker Pole? Whisker poles are used for non-spinnaker class racing and short-handed cruising, or whenever downwind performance is desired without the use of conventional
More informationClub 420 Class Rigging Manual
Club 420 Class Rigging Manual Performance sailcraft 2000 Inc 2555 Dollard Lasalle, Quebec, H8N 3A9 Tel: 514 363 5050 email: info @ps2000.ca Website: www.ps2000.ca Mast set up Remove the pole and unwrap
More informationInspection of Sail Rigging and Masts on Inspected Small Passenger Vessels. 2. REFERENCES. Subchapter T - Small Passenger Vessels Under 100 Gross Tons.
Sector Honolulu Inspection Note # 13 September 11, 2008 Inspection of Sail Rigging and Masts on Inspected Small Passenger Vessels 1. PURPOSE. This inspection note provides guidance to vessel owners, rigging
More informationE S/304S. Manual and Spare parts list Furlex 204S & 304S
597-132-E 2018-04-03 204S/304S Manual and Spare parts list Furlex 204S & 304S 1 Contents Page 1 Introduction 3 1.1 Key features 3 1.2 What s included? 4 1.3 Main dimensions 4 1.4 Safety precautions 5 1.5
More informationBeneteau 36.7 Sail Development
Beneteau 36.7 Sail Development North Sails began working with the 36.7 as soon as the first boat was launched in 2001. Since then we have built inventories for several of the European boats, the first
More information-607- TP 52 Valars 3 (Ex-Mean Machine) SOLD
-607- TP 52 Valars 3 (Ex-Mean Machine) SOLD Name Model TP 52 GENERAL TP 52 Valars 3 (Ex-Mean Machine) Type RACER Year 2007 Hull Material GRP Flag russian Lying.Valencia Price PRICE UNDER REQUEST Vat NOT
More informationCORPORATE SAFETY MANUAL
CORPORATE SAFETY MANUAL Procedure No. 32-0 Revision: Date: May 2005 Total Pages: 10 PURPOSE To provide general guidelines for the inspection of all ropes, chains, cables, slings, etc. used for personnel
More informationSchock Harbor 25 Sempre Amici
Schock Harbor 25 Sempre Amici Make: Schock Model: Harbor 25 Length: 25 ft Price: $ 62,000 Year: 2009 Condition: Used Location: Seattle, WA, United States Boat Name: Hull Material: Draft: Number of Engines:
More information