Bushing Viton O-ring (Other material available) Anti-Static Device
|
|
|
- Jade Shanon Stokes
- 5 years ago
- Views:
Transcription
1 Triac Ball Valves feature a high quality investment cast body and end. They are available in sizes from 1/4 to 3. Superior leak protection is accomplished by using our patented Pyramidal stem seal system shown in the graphic below. This advanced system protects against wear and leakage experienced by other ordinary ball valves. VALVE VALVE Cv 1/4" 7 3/8" 8 1/2" 15 3/4" 40 1" /4" /2" 250 2" / Easy to Automate! See automated data sheets for pre-sized assemblies DIRECT MOUNT 2-Piece Design Sizes 1/4-3 ISO 5211 Direct Actuator Mount Pyramidal Stem Seal Packing System Lockable Manual Handle HOW TO ORDER MANUAL VALVES SERIES 22 2-Piece End Connection Additional Special Designation Special Designation See part number matrix for itemized options Pneumatic Electric 22M
2 PRESSURE IN PSIG (-28) (-18) Pressure vs. Temperature Chart 100 (38) 50 C RTFE (93) (149) 400 (204) TEMPERATURE IN F ( C) 1/4"~3" 500 (260) High Cycle Full Port Ball Valve (316) PRESSURE IN BAR NOTE: Dotted line shows the rating for valve body. Solid line shows the rating for valve seat. Both ratings need to be considered when determining the limitation of the valve for specific application. Consult factory for other seat materials. MATERIALS LIST NO. PART NAME QTY MATERIAL 1 BODY 1 ASTM A351 GRADE CF8M 2 END CAP 1 ASTM A351 GRADE CF8M 3 BALL 1 3 BALL 1 1/4" THRU 3/8" ASTM A276 SS316 1/2" THRU 3" ASTM A351 GRADE CF8M 4 SEAT 2 RTFE 5 JOINT GASKET 1 PTFE 6 STEM SEAL 1 RTFE 7 STEM 1 ASTM A276 SS316 8 GLAND PACKING 1 PTFE 9 GLAND BUSHING 1 AISI LOCK SADDLE 1 AISI STEM NUT 1 AISI HANDLE 1 AISI HANDLE SLEEVE 1 VINYL 14 STEM WASHER 1 AISI BELLEVILLE WASHER 2 AISI STOP BOLT 1 AISI BOLT NUT 1 AISI GLAND PACKING 1 RTFE 19 HANDLE LOCK 1 AISI O-RING 1 VITON 21 HANDLE NUT 1 AISI ANTI-STATIC DEVICE 2 AISI 316 Break Away Torque for RTFE Seats IN-LBS. 1/4" 62 3/8" 62 1/2" 62 3/4" 71 1" /4" /2" 230 2" / NOTE: For other seat material, consult factory A B C D E F L Z1 Z2 AB AC AD AE DD1 DD2 LBS ISO /4" F03/F04/F05 3/8" F03/F04/F05 1/2" F03/F04/F05 3/4" F03/F04/F05 1" F04/F05 1-1/4" F04/F05 1-1/2" F05/F07 2" F05/F07 2-1/ F07/F F07/F10 Viton is a registered trademark of E.I. DuPont de Nemours. A-T Controls reserves the right to change product designs and technical/dimensional specifications without notice.
3 Pneumatic Double Acting Automated Ball Valve Package Sizes 1/4 3 Pyramidal Stem Seal Design VALVE A B C D E VALVE Cv 1/4" /8" /2" /4" " /4" /2" " / DIMENSIONS SHOWN ARE FOR ASSEMBLIES D FOR 80 PSI SUPPLY SERIES 22 2-Piece OPTIONS D FOR 80 psi AIR SUPPLY 1/4" 22-TX-025/TRYD-XX 3/8" 22-TX-038/TRYD-XX 1/2" 22-TX-050/TRYD-XX 3/4" 22-TX-075/TR1D-XX 1" 22-TX-100/TR1D-XX 1-1/4" 22-TX-125/2R2D-XX 1-1/2" 22-TX-150/2R2D-XX 2" 22-TX-200/2R2D-XX 2-1/2" 22-TX-250/2R3D-XX 3" 22-TX-300/2R4D-XX Other options available - call for details Actuators are sized based on clean/clear fluid. 22DA D FOR 60 psi AIR SUPPLY 1/4" 22-TX-025/TRYD-XX 3/8" 22-TX-038/TRYD-XX 1/2" 22-TX-050/TRYD-XX 3/4" 22-TX-075/TR1D-XX 1" 22-TX-100/TR1D-XX 1-1/4" 22-TX-125/2R2D-XX 1-1/2" 22-TX-150/2R3D-XX 2" 22-TX-200/2R3D-XX 2-1/2" 22-TX-250/2R3D-XX 3" 22-TX-300/2R4D-XX NEMA 4 Solenoid (A) NEMA 4 Limit Switch (2) spdt (A) NEMA 7 Solenoid (B) NEMA 7 Limit Switch (2) spdt (B) Intrinsically Safe Solenoid (C) Instrinsically Safe Limit Switch (C) End Connections TRIAC Actuator Series Actuator Size Double Acting Solenoid Limit Switch See valve part number matrix for complete part number and options.
4 Pneumatic Spring Return Automated Ball Valve Package Sizes 1/4 3 Pyramidal Stem Seal Design VALVE A B C D E VALVE Cv 1/4" /8" /2" /4" " /4" /2" " / DIMENSIONS SHOWN ARE FOR ASSEMBLIES D FOR 80 PSI SUPPLY SERIES 22 2-Piece OPTIONS D FOR 80 psi AIR SUPPLY 1/4" 22-TX-025/TR1S-XX 3/8" 22-TX-038/TR1S-XX 1/2" 22-TX-050/TR1S-XX 3/4" 22-TX-075/2R2S-XX 1" 22-TX-100/2R2S-XX 1-1/4" 22-TX-125/2R3S-XX 1-1/2" 22-TX-150/2R3S-XX 2" 22-TX-200/2R3S-XX 2-1/2" 22-TX-250/2R5S-XX 3" 22-TX-300/2R6S-XX 22SR D FOR 60 psi AIR SUPPLY NEMA 4 Solenoid (A) NEMA 4 Limit Switch (2) spdt (A) NEMA 7 Solenoid (B) NEMA 7 Limit Switch (2) spdt (B) Intrinsically Safe Solenoid (C) Instrinsically Safe Limit Switch (C) Other options available - call for details Actuators are sized based on clean/clear fluid. 1/4" 22-TX-025/TR1S-XX 3/8" 22-TX-038/TR1S-XX 1/2" 22-TX-050/TR1S-XX 3/4" 22-TX-075/2R2S-XX 1" 22-TX-100/2R3S-XX 1-1/4" 22-TX-125/2R3S-XX 1-1/2" 22-TX-150/2R4S-XX 2" 22-TX-200/2R4S-XX 2-1/2" 22-TX-250/2R5S-XX 3" 22-TX-300/2R6S-XX End Connections TRIAC Actuator Series Actuator Size Spring Return Solenoid Limit Switch See valve part number matrix for complete part number and options.
5 Electric Automated Ball Valve Package Sizes 1/4 3 Pyramidal Stem Seal Design VALVE A B C D 1/4" /8" /2" /4" " /4" /2" " / VALVE Cv SERIES 22 2-Piece ON-OFF 1/4" 22-TX-025/WEA1-XX 3/8" 22-TX-038/WEA1-XX 1/2" 22-TX-050/WEA1-XX 3/4" 22-TX-075/WEA1-XX 1" 22-TX-100/WEA1-XX 1-1/4" 22-TX-125/WEA1-XX 1-1/2" 22-TX-150/WEA1-XX 2" 22-TX-200/WEA1-XX 2-1/2" 22-TX-250/WEB1-XX 3" 22-TX-300/WEC1-XX OPTIONS 24 VAC/24 VDC/220VAC Feedback potentiometer Other options available - call for details Actuators are sized based on clean/clear fluid. 22EL MODULATING 1/4" 22-TX-025/WEA2-XX 3/8" 22-TX-038/WEA2-XX 1/2" 22-TX-050/WEA2-XX 3/4" 22-TX-075/WEA2-XX 1" 22-TX-100/WEA2-XX 1-1/4" 22-TX-125/WEA2-XX 1-1/2" 22-TX-150/WEA2-XX 2" 22-TX-200/WEA2-XX 2-1/2" 22-TX-250/WEB2-XX 3" 22-TX-300/WEC2-XX End Connections Options See valve part number matrix for complete part number and options. TRIAC Actuator Series Actuator Size On-Off Voltage
6 Valve Options Other Products Various s PTFE, RTFE, 50/50 STFE, 25% CTFE, Delrin, PEEK, UHMWPE, TFM-1600 Special Seats Balls and Seal Designs Steam Jacketed Valves Operator Options Quarter-turn Gear Operators Spring Return Deadman Handles Oval handles, TEE Handles Floor Mounted Damper Drives Limit Switches Mounted on Manual Valves Specials and Solutions Steam Jackets Stem Extensions V-ported Control Valves Multi-port Valve Solutions Fugitive Emissions Bonnets (TSM s) Oxygen Cleaning Lockout Brackets Vented Balls No Play Mounting Kits Fusible Link Assemblies 180º Actuators FM Approved Valves and Assemblies Lockout Mounting Kits Stem Extensions Manual and automated valve assemblies for gas burner management applications and safety shutoff Special Multi-Port Valves Dual Valve Assemblies
Series 8R HIGH PERFORMANCE
Triac 8R Series s are the finest quality 3-piece valves on the market. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville
Series Way Ball Valve Threaded. SERIES 38 3-Way. Easy to Automate! See automated data sheets for pre-sized assemblies 38-TH-0025-XXX-T
This investment cast 3-way valve can be an economical option for flow patterns that normally require multiple 2-way valves. Available in L or T port configurations, this valve is excellent for diverting
Series C8/CR Cryogenic
Triac C8/CR Series 3-Piece Ball feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live loaded packing system is accomplished with Belleville
Telefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
600 Series. Brass Ball Valves
Series Brass Ball Valves full range of economical brass ball valves intended for your common fluid control applications. vailable in standard and full port threaded, full port solder end, and full port
TBV Series 5100 Diverter/Three-Way Ball Valve
TBV Series 5100 Diverter/Three-Way Ball Valve TBV Series 5100 Ball Valve Manifolding Diverting Blending Replaces the use of two or more two-way valves Cameron s TBV brand offers the Series 5100 diverter/three-way
High-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
Go to Table of Contents. Ball and Plug Valves
Ball and Plug s July 2014 Series s Parker series manually, pneumatically and electrically actuated two-way and three-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications
FLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
Dean Pump Self-Priming Chemical Process Pumps
Bulletin C 1.2.34.7 Dean Pump Self-Priming Chemical Process Pumps php Series HEAD CAPACITY RANGE CHARTS php Self Primer - 2 Pole 3500 RPM 500 CAPACITY M 3 /HR 2900 RPM 50 HERTZ 25 50 75 125 150 400 TOTAL
FLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
3-PIECE BALL VALVE, 3600 PSI/ PN 248, WITH ISO DIRECT MOUNTING PAD 306M SERIES/ PED Category II
3-PIECE BALL VALVE, 3600 PSI/ PN 248, WITH ISO DIRECT MOUNTING PAD 306M SERIES/ PED Category II 306M User Manual English Version Use for company in Europe who will place the product on the market, please
Pressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
3" 24" 80A 600A DN80 DN600 Body size The largest size manufactured : 60" (1500A) Disc form Damper type Trim materials Trim treatment
STANDARD SPECIFICATION SS-CE-600B-A JUL. 2004 600B Disc Damper Type Butterfly Valve GENERAL 600B STANDARD SPECIFICATIONS BODY Series 600B This series 600B is a wafer type butterfly valve, designed to be
INSTRUMENTATION VALVES
INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION
shutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
KTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood SECTION 1 - STORAGE 1.1 Preparation and preservation for storage All valves should be properly packed in order to protect the parts
TBV OPERATION AND MAINTENANCE MANUAL SERIES 2800: FLANGED BALL VALVE. For technical questions, please contact the following:
TBV OPERATION AND MAINTENANCE MANUAL SERIES 2800: FLANGED BALL VALVE For technical questions, please contact the following: Engineering Department 1537 Grafton Road Millbury, MA 01527 Phone: (508) 887-9400
FLANGED MULTI-PORT BALL VALVES
INTRODUCTION This instruction manual includes installation, operation and maintenance information for flanged multi-port ball valves. This manual addresses lever operated ball valves only. Please refer
REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID
PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250
Dual Modular Safety Shutoff Valves. DMV-D/602 Series DMV-DLE/602 Series
Dual Modular Safety Shutoff Valves DMV-D/602 Series DMV-DLE/602 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. UL Recognized UL 429 File # MH16727 CSA
GM Series Dual-Block Multi-Function Gas Control Valves
Installation Sheets Manual 121 Gas Combustion Combination Controls and Systems Section G Technical Bulletin GM Issue Date 0297 GM Series Dual-Block Multi-Function Gas Control Valves Figure 1: GM Series
SPECIFICATIONS ATTENTION
VPS 504 S06 Installation Manual - P/N 80122 - Ed. 01/09 VPS 504 S06 and S05 Valve Proving System Installation Instructions VPS 1 6 Gases Natural gas, air and other inert gases. NOT suitable for butane
WKM Model 320F Floating Ball Valve
Date: 4 WKM Model 320F Floating Ball Valve Installation, Operation, and Maintenance Manual 1 Date: 4 All the information contained in this manual is the exclusive property of Cameron. Any reproduction
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators Technical Instructions Document No. 155-51P5 VG August 1, 01 VGG VGD0 VGD0 Description Only when assembled to Series SKP actuators
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators Technical Instructions Document No. 155-51P5 VG August 11, 005 GAS009R1 VGG VGD0 VGD0 Description Only when assembled to SKP
PILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660
PILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660 Patent Protected Premium Seat Tightness to Set Pressure Snap or Modulating Valve Action Provides Ability to Meet Clean Air Act Requirements 600 TYPICAL
JR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE
JR Series Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves
Dual Modular Safety Shutoff Valves. DMV-D/602 Series DMV-DLE/602 Series
Dual Modular Safety Shutoff Valves DMV-D/602 Series DMV-DLE/602 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. UL Recognized UL 429 File # MH16727 CSA
Dual Modular Safety Shutoff Valves. DMV-D/11 Series DMV-DLE/11 Series
Dual Modular Safety Shutoff Valves DMV-D/11 Series DMV-DLE/11 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. CSA Certified ANSI Z21.21 CSA 6.5 Marked
Century Valve. Flow Control. Century Valve Hand Valves, Large Bore, Severe Service, and Isolation Valves. Total Flow Control Solutions.
Century Valve Bore Sizes: 1/8 [3.2 mm] 3/16 [4.8 mm] 5/16 [8 mm] 3/8 [9.5 mm ] 7/16 [11 mm] 5/8 [16 mm] Straight through (roddable) and globe-pattern models. Needle (rising plug) and ball stem end models.
Team Insert Valve Sample Specification The Insert Valve shall conform to the following:
Team Insert Valve Sample Specification The Insert Valve shall conform to the following: The Ductile Iron 250 p.s.i.g. Insert Valve shall be a Resilient Wedge Gate Valve designed for use in potable water,
Directional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
CVI Valve Line. Exceeds the industry s highest standards for reliability and performance
CVI Valve Line Exceeds the industry s highest standards for reliability and performance Available in the most standard models with the shortest lead times in the industry Exceptional quality every CVI
Two-port seat valves
4 345 Two-port seat valves with flange, PN16 VVF45... Two-port seat valves with flange, PN16 Spheroidal cast iron GGG-40 DN50...150 mm k vs 19...300 m 3 /h Stroke 20 or 40 mm Can be equipped with actuators
Installation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
Choosing the right miniature instrument and control valve is a snap
Choosing the right miniature instrument and control valve is a snap INVALCO Micro Valve The Micro Valve is a unique miniature valve offering versatility and rugged construction. Since its introduction
Pressure and/or Temperature Pilot Operated Steam Regulators Series 2000
Hoffman Specialty Regulators Regulators Pressure and/or Temperature Operated Regulators Series 2000 The Hoffman Specialty Series 2000 consists of main valves, pilot valves, wells and hardware kits. They
PNEUMATIC CONTROL VALVES PV25 (EN) V25G globe control valves with linear actuators PA series
PNEUMATIC CONTROL VALVES PV25 (EN) V25G globe control valves with linear actuators PA series DESCRIPTION The PV25 control valves are single seated, two-way body constructed with in-line straight connections.
Bray/ VAAS O-Ported Series Knife Gate Valve 770/780 Series Operation and Maintenance Manual
Bray/ VAAS Knife Gate Valve 770/780 Series Operations and Maintenance Manual Table of Contents Definition of Terms 1 Safety Instructions 1 Introduction 2 Unpacking 2 Storage 2 Installation 2 Commissioning
Line Blind Valves. Double Block and Bleed Cargo Segregation API 607. Fire Safe Certified
Year : API 0 Fire Safe Certified New Innovative Patented Design Page Year : Introduction Easy to operate and reliable in use. Applications Crude oil product (Tankers) Chemical Tankers. LPG and LNG carriers.
SV - Safety Shutoff Valve with Proof of Closure 1/2" NPT - 2" NPT. SV/614 Series SV-DLE/614 Series
SV - Safety Shutoff Valve with Proof of Closure 1/2" NPT - 2" NPT SV/614 Series SV-DLE/614 Series Normally closed automatic shutoff valve with proof of closure and the following approvals. CSA Certified
VALVE MANUFACTURERS ASSOCIATION API 622 API 624
VALVE MANUFACTURERS ASSOCIATION API 622 API 624 Written by Rich Davis Manager Business Development Western Hemisphere & China Flexitallic L.P., Deer Park, Texas Presented By: Steve Butler, Shell Global
Proportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
Dual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure. DMV-D/624L Series DMV-DLE/624L Series
Dual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure DMV-D/624L Series DMV-DLE/624L Series Two normally closed automatic shutoff valves in one housing. Valve 2 (V2) incorporates proof
BCV31 DN20 - Blowdown Control Valve
4034650/8 IM-P403-37 AB Issue 8 BCV31 DN20 - Blowdown Control Valve Installation and Maintenance Instructions 1. Safety information 2. Application 3. Technical data 4. Operation 5. Installation 6. Flow
Instructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position.
027R9782 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM ICM 027R9782
PNEUMATIC ACTUATED INDUSTRIAL VALVES SERIES:
PRODUCT SPECIFICATION March 05 PNEUMATIC ACTUATED INDUSTRIAL VALVES SERIES: 1800 SIZES 2-1/2 to 12 INCHES Heavy Globe Control Valves Two-Way and Three-Way, Reciprocating Iron, Steel, or Stainless Steel
VRB00 Series CLASS B SERVO REGULATED COMBINATION VALVES
GAS VALVES VRB00 Series CLASS B SERVO REGULATED COMBINATION VALVES APPLICATION PRODUCT HANDBOOK The VRB00 Series class B servo regulated combination valves are used for control and regulation of gaseous
SERVICE MANUAL No. I-0043
Bettis Canada Ltd. 4112 91A Street Edmonton, Alberta, Canada T6E 5V2 Tel: (403) 450-3600 Fax: (403) 450-1400 SERVICE MANUAL No. I-0043 Edmonton GAS/HYDRAULIC ADDITIONAL COMPONENTS CUSTOMER: P.O.#: W.O.#:
SOFT SEAL PISTON VALVES
DV & VL SERIES VESSEL & REACTOR VALVES SOFT SEAL PISTON VALVES PROCESS VALVES SERIES DV, STANDARD RANGE Original Strahman Ram-Type Drain Valve FEATURES Quality System Registered to ISO 9001:2008 Certificate
PRESSURE REGULATORS GAS BACK PRESSURE NON VENTING
GAS BACK PRESSURE NON VENTING APPLICATION: Vent lines or pressure regulation on separators, heater treaters, compressor stations, gas gathering and distribution systems where it is desired that no gas
Tank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
JR Series. Gas Pressure Reducing Valves. a division of Jordan Valve GAS PRESSURE REDUCING VALVES
a division of Jordan Valve JR Series Gas Pressure Reducing Valves GAS PRESSURE REDUCING VALVES The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and
Dual Modular Safety Shutoff Valves with Proof of Closure. DMV-D/622 Series DMV-DLE/622 Series
Dual Modular Safety Shutoff Valves with Proof of Closure DMV-D/622 Series DMV-DLE/622 Series Two normally closed automatic shutoff valves in one housing. Valve 2 (V2) incorporates proof of closure. Each
Pneumatic Control Valve PV25 (EN)
DESCRIPTION The PV25 control valves are single seated, two-way body constructed with in-line straight connections. The PA pneumatic actuator is rubber diaphragm and multisprings. Its action can be DA -direct
INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION
INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.
Dual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure. DMV-D/624L Series DMV-DLE/624L Series
Dual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure DMV-D/624L Series DMV-DLE/624L Series Two normally closed automatic shutoff valves in one housing. Valve 2 (V2) incorporates proof
2-Port Seat Valves with Flange, PN 16
4 45 2-Port Seat Valves with Flange, PN 6 VVF45... dular cast iron EN-GJS-400-5 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SKB...- or SKC...- electrohydraulic actuators Use For use in
SECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
Dual Modular Safety Shutoff Valves with Two-stage operation. DMV-ZRD/602 Series DMV-ZRDLE/602 Series
Dual Modular Safety Shutoff Valves with Two-stage operation DMV-ZRD/602 Series DMV-ZRDLE/602 Series Two normally closed automatic shutoff valves in one housing; each with the following approvals. UL Recognized
Polyethylene Valves for Natural Gas.
Polyethylene Valves for Natural Gas. Providing valves and equipment to the world s energy markets for over 00 years. Polyethylene Valves Made in the U.S.A. The POLYBALL valve is manufactured at our Mansura,
Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002
Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact
BR 27g. Operating, assembly and maintenance instructions for discontinuous sampling valve. 1. Design, operation and dimensions:
Operating, assembly and maintenance instructions for discontinuous sampling valve BR 27g The equipment may only be dismounted and disasembled by skilled staff, who are familiar with the assembly, start-up,
Propor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
Type 1098-EGR. Pilot-Operated Valve Link Regulators. Features. Fisher Controls
Type 1098-EGR and Type 1098H-EGR VL1000 FIELDVUE Pilot-Operated Valve Link Regulators Fisher Controls January 1982 Bulletin The Type 1098-EGR and Type 1098H-EGR regulators (figure 1) provide economical
Dual Modular Safety shutoff Valves with Proof of Closure and NEMA Type 4x Enclosure DMV-D 704/624 DMV-D 704/634 DMV-DLE 704/624 DMV-DLE 704/634
Dual Modular Safety shutoff Valves with Proof of Closure and NEMA Type 4x Enclosure DMV-D 704/624 DMV-D 704/634 DMV-DLE 704/624 DMV-DLE 704/634 Two normally closed automatic shutoff valves in one housing.
Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
LRS(H)4 Pressure-Reducing Regulator User Manual
LRS(H)4 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be considered
Installation & Operation Manual Proven Quality since 1892
Content 1. ERIKS operating companies 2. Product description 3. Requirements for maintenance staff 4. Transport and storage 5. Function 6. Application 7. Installation 8. Maintenance 9. Service and repair
2-Port Seat Valves with Flange, PN 16
4 40 2-Port Seat Valves with Flange, PN 6 VVF4... Grey cast iron EN-GJL-250 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SQX- electromotoric or SKD...-, SKB...- or SKC...- electrohydraulic
299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012
Installation Guide English September 2012 299H Series Introduction This Installation Guide provides instructions for installation, startup, and adjustment of 299H Series regulators. To receive a copy of
VRD Series VRD40.xxxUx Double Valves for use with SKP... electro-hydraulic actuators
VRD Series VRD40.xxxUx Double Valves for use with SKP... electro-hydraulic actuators Document No. 7649 VRD40.xxxUx ISO 9001 and 14001 REGISTERED FIRM Only with series SKPxx.xxxUx actuators Description
PNEUMATIC CONTROL VALVES PV25 (ANSI) V25S globe control valves with linear actuators PA series
PNEUMATIC CONTROL VALVES PV25 (ANSI) V25S globe control valves with linear actuators PA series DESCRIPTION The PV25 control valves are single seated, two-way body constructed with in-line straight connections.
INDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
Fisher 8532 High-Performance Butterfly Valve
Product Bulletin D101552X012 852 Valve Fisher 852 High-Performance Butterfly Valve The Fisher 852 high-performance butterfly valve (figure 1) provides outstanding performance under extreme pressure and
Overflow valves Type OFV Type OFV-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 Type OFV-SS 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
TYPE 2800E EXTERNALLY MOUNTED, GAS LUBRICATED, NON-CONTACTING, DOUBLE CARTRIDGE SEAL
A Seat/Mating Ring B Face/Primary Ring (inboard) C Spring D Face/Primary Ring (outboard) E O-Ring F Drive Collar G Setting Ring H Sleeve TYPE 2800E B A D C H E Spiral Groove Technology G F Product Description
Technical Bulletin 0812-BE/BSA
Technical Bulletin 0812-BE/BSA RF Valves mission is to solve valve problems. We achieve this by providing valves that offer the lowest cost of ownership and operation, highest reliability and minimum maintenance.
VALVES & MEASUREMENT
VALVES & MEASUREMENT TBV OPERATION AND MAINTENANCE MANUAL SERIES 1100: THREE PIECE BALL VALVE For technical questions, please contact the following: Engineering Department 1537 Grafton Road Millbury, MA
Dual Modular Safety Shutoff Valve with NEMA 4x Enclosure. DMV-D/604L Series DMV-DLE/604L Series
Dual Modular Safety Shutoff Valve with NEMA 4x Enclosure DMV-D/604L Series DMV-DLE/604L Series Two normally closed automatic shutoff valves in one housing; each with the following approvals. UL Listed
MODELS 1500, 1520, 1530, 1560
Installation, Operation and Maintenance MODELS 1500, 1520, 1530, 1560 IOM1500.0 October, 2002 TABLE OF CONTENTS DESCRIPTION Introduction Pilot Valve Design and Function Safety Warnings Shipping, Inspection
Operation Manual Piston Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Operation Manual Piston Sensed Gas Pressure Regulators (Models KT9, KT10, Welded KT10, KT12) Table of Contents:
Instruction Manual Pressure Relief Valve and Rupture Disc Chlorine or Sulfur Dioxide, Series 869
Instruction Manual Pressure Relief Valve and Rupture Disc Chlorine or Sulfur Dioxide, Series 869-1 - 115.6020.15 These instructions describe the installation, operation and maintenance of the subject equipment.
CV08-20 Check Valve DIRECTIONAL VALVES. DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
DIRECTIONAL VALVES CV08-20 Check Valve DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device. OPERATION The CV08-20 allows flow passage from 1 to 2,
PNEUMATIC ACTUATED INDUSTRIAL VALVES SERIES:
PRODUCT SPECIFICATION August 2006 PNEUMATIC ACTUATED INDUSTRIAL VALVES SERIES: 5800 SIZES 1/2 to 4 INCHES Compact Globe Control Valves Two-Way, Linear, Steel or Stainless Steel Body Valves for Process
DelVal Flow Controls Private limited
DelVal Flow Controls Private limited (A DIVISION OF DelTech CONTROLS LLC, USA) DelVal Series 50/5, 5A/5B Butterfly Valves INSTALLATION, OPERATION AND MAINTENANCE MANUAL ENGINEERING DATA SHEET E.D.S. NO
FOR INSTALLING CO 2 BLENDER KIT (P/N IN BEER SYSTEM
IMI CORNELIUS INC One Cornelius Place Anoka, MN 55303-623 Telephone (800) 238-3600 Facsimile (612) 22-326 INSTALLATION INSTRUCTIONS FOR INSTALLING CO 2 BLENDER KIT (P/N 111612000 IN BEER SYSTEM SECONDARY
Three-port valves. Special versions with special stem sealing gland for: High temperature hot water C Thermo oils
4 440 Three-port valves with flange, PN6 VXF4... Three-port valves with flange, PN6 Can be used as mixing or diverting valves Grey cast iron GG-25 DN5...50 mm k vs.9...300 m 3 /h Stroke 20 or 40 mm Can
Manual Actuated Boiler Blowdown Valves
Manual Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Operation 5. Maintenance 6. Spare parts p.1 1. Safety
ASEPTIC SAMPLING VALVES SANITARY SAMPLING VALVES SANITARY SAMPLING BOTTLE TANK BOTTOM ASEPTIC VALVE
BOLLETTINO VSS-15 HigH purity Ball valves n FULL PORT The VSS ball valves are engineered to be a true process piping component to specifically meet the demanding processes found in pharmaceutical industries.
Engineered Valves Group. Revision 2. FABRI-VALVE High Performance Knife Gate Valve.
Engineered Valves Group XS 150 Revision 2 FABRI-VALVE High Performance Knife Gate Valve www.engvalves.com Fabri-Valve XS150 High Performance Knife Gate Valve XS150 High Performance Knife Gate Valve T he
K Page 1 of 48 Air Intake - Pg. 17
K532-53168 Page 1 of 48 Air Intake - Pg. 17 Ref # Part Number Qty Description 24 25 041 06-S 1 Gasket, elbow 25 48 054 09 1 Elbow, air cleaner Discontinued not available at Kohler Co. 35 277116-S 1 Brace,
High Pressure Cylinder Valves
High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series
Dual Modular Safety Shutoff Valves with Two-stage operation and Proof of Closure. DMV-ZRD/612 Series DMV-ZRDLE/612 Series
Dual Modular Safety Shutoff Valves with Two-stage operation and Proof of Closure DMV-ZRD/612 Series DMV-ZRDLE/612 Series Two normally closed automatic shutoff valves in one housing. Valve 1 (V1) incorporates
BUTTERFLY VALVES Series 800
BUTTERFLY VALVES Series 800 WARNING Before proceeding read ALL instructions and become familiar with the equipment and associated drawings. Follow ALL applicable safety regulations and codes for pressurized
BERMAD Waterworks. Level Control Valve with Altitude Pilot. 700 Series. Model X. Features and Benefits. Major Additional Features
Level Control Valve with Altitude Pilot High level reservoirs & water towers Energy cost critical systems Systems with poor water quality Inherent refreshing Level sustaining at reservoir outlet The Level