Sandvik TIM3D Locked to target. Advanced navigation system for surface top hammer drilling
|
|
- Clare Woods
- 5 years ago
- Views:
Transcription
1 Sandvik TIM3D Locked to target Advanced navigation system for surface top hammer drilling
2 Accurate navigation Smooth operation with touch screen
3 A new era of navigation systems Sandvik TIM3D V2 is a drill rig navigation system that brings drilling rigs into the realm of 3D machine automation. The system uses satellite navigation to guide the starting point and inclination of drilling in accordance with the drilling plan. TIM3D V2 consists of four essential operations: Rig navigation, feed alignment, drilling and reporting. TIM3D V2 is available for Sandvik DPi and DX series surface top hammer drill rigs. Accuracy for absolute efficiency TIM3D V2 drilling navigation system produces parallel holes and keeps hole spacing and bottom levels accurate, translating into better fragmentation and decreased amount of boulders and fines. This results in increased efficiency further in the production process, both in crushing and loading and hauling. The system also removes the need for surveying and for any hole marking, thereby minimizing the risk of errors and significantly speeding up drilling. Based on a multisatellite RTK GNSS navigation, TIM3D V2 is compatible with GPS and GLONASS satellite systems. The navigation uses drilling plans made either with standard office programs or with the system itself. The plan is imported into the rig in IREDES standard format containing the target coordinates in three dimensions, using either the wireless data transfer feature or a USB memory. Local base station, or a VRS correction, keeps navigation accuracy within 5 centimetres and thereby the total system accuracy within 10 centimetres. Wireless data transfer significantly increases process speed and improves user comfort.
4 Accuracy. Quality. Cost-efficiency. Usability of the system in TIM3D V2 is top class thanks to an ultra-fast computer and the look and feel of the new interface. All buttons and icons are designed for smooth functionality and great performance. Drilling process is made simple. The system compares the position of the drill bit with the planned hole position and guides the operator move the bit to the correct starting point of the chosen hole. It also features a possibility to indicate the direction of rows in drill plan generation by setting the drill bit to any given point in the first row. During drilling, the operator can follow the penetration rate and hole depth, distance to target, number of required holes and current feed alignment. At the target depth, drilling stops automatically. The system also shows the status of the holes with color codes. TIM3D V2 allows the operator to deviate from the drill plan if needed, for example due to inoperability of the planned starting point. Despite the modification, the hole bottom remains as planned: TIM3D V2 system automatically calculates a new course based on the actual starting point of the hole. It is also possible to change the starting and ending points of the hole but still keep the direction, inclination and bottom level of the hole. Moreover, it is possible to use GPS mode to drill without a pre-set plan. In that case the system continuously shows hole depth, target depth and the level of bit at a given moment. Functional look and feel
5 TIM3D V2 allows deviations from the drill plan. If this is done, a new course is automatically calculated.
6 Accurate drilling. Excellent fragmentation
7 Reports for all needs The drilling data drilled holes and their actual parameters are stored in the system memory from where it can be imported in various programs, such as blasting simulation. Data of drilled holes can thus be retrieved any time and drilling continued even despite the plan having been already started and closed. The drilling data can be exported to external programs as IREDES xml file. A report is created of each finished drill plan, including information on position and depth of the drilled holes, and drilling time. In addition, the system produces a hole report even when GPS mode without a pre-set plan is being used.
8 Sandvik is a global industrial group with advanced products and world-leading positions in selected areas tools for metal cutting, equipment and tools for the mining and construction industries, stainless materials, special alloys, metallic and ceramic resistance materials as well as process systems. Sandvik Construction is a business area within the Sandvik Group providing solutions for virtually any construction industry application encompassing such diverse businesses as surface rock quarrying, tunneling, excavation, demolition, road building, recycling and civil engineering. The range of products includes rock tools, drilling rigs, breakers, bulk-materials handling and crushing and screening machinery. Sandvik Construction B2-503ENG Copyright Sandvik. Sandvik reserves the right to alter specifications without notice. Note: machines shown in pictures are equipped with options.
Drilling and Blasting Technology Prof. Kaushik Dey Department of Mining Engineering Indian Institute of Technology, Kharagpur
Drilling and Blasting Technology Prof. Kaushik Dey Department of Mining Engineering Indian Institute of Technology, Kharagpur Lecture 28 Surface blasting-1 Let me welcome you to the lecture number 28 of
More informationSandvik Jaw Crushers
Sandvik Jaw Crushers Excellent durability thanks to welded frame. Range including models for mobile applications. 2 The product of decades of experience At Sandvik we have over a century of experience
More informationBUYER S GUIDE AQUAlogger 530WTD
OCEAN & ENVIRONMENTAL BUYER S GUIDE AQUAlogger 530WTD Wireless Temperature and Depth Logger AQUAlogger 530WTD The AQUAlogger 530WTD has an innovative design that includes the ability to transfer stored
More informationDiver-NETZ Wireless Groundwater Monitoring Networks
Diver-NETZ Wireless Groundwater Monitoring Networks Monitor your groundwater without boundaries A COMPLETE WIRELESS GROUNDWATER MONITORING SYSTEM From wireless field data collection and recording, to project
More informationLX Compass module 3 Electronic compass device User manual
LX Compass module 3 Electronic compass device User manual LX navigation d.o.o., Tkalska 10 SLO 3000 Celje, tel: + 386 3 490 46 70, fax: + 386 3 490 46 71 info@lxnavigation.si, http://www.lxnavigation.com
More informationDive Planet. Manual. Rev Basic User Interface. 2 How to organize your dives. 3 Statistics. 4 Location Service and Map View.
Dive Planet Manual Rev 1.2 1 Basic User Interface 2 How to organize your dives 3 Statistics 4 Location Service and Map View 5 Settings 6 Languages 7 Buddies and guide 8 Backup and restore of the data 9
More informationAUTOMATIC HOSE TEST UNIT, TYPE SPU
VALVES AND FITTINGS UP TO 14,000 BAR TEST AND CONTROL EQUIPMENT H IGH PRESSURE TECHNOLOGY AUTOMATIC HOSE TEST UNIT, TYPE SPU Pressure range from 1 up to 10,000 bar User-friendly touch panel operation HIGH-PRESSURE
More informationDRILL MONITOR DM-100 OPERATIONS MANUAL
DRILL MONITOR DM-100 OPERATIONS MANUAL 1 INSTALLATION AND SETUP The Drill Monitor comes complete with the following parts: 1 Drill Monitor unit 1 Mounting bracket for Drill Monitor 1 Encoder 1 Encoder
More informationCOMPARISON DRIVO - DIRETO
COMPARISON DRIVO - DIRETO EN DRIVO Interactive hometrainer with direct transmission Simply choose the course or the training program and Drivo will automatically adjust resistance. Simulates Challenging
More informationMARITIME UNIVERSITY IN SZCZECIN ORGANIZATIONAL UNIT: FACULTY OF NAVIGATION - DEPARTMENT OF NAVIGATION DEVICES. Instruction
MARITIME UNIVERSITY IN SZCZECIN ORGANIZATIONAL UNIT: FACULTY OF NAVIGATION - DEPARTMENT OF NAVIGATION DEVICES Instruction PRINCIPLE OF OPERATION AND HANDLING OF THE NAVIGATION ECHOSOUNDER (Echosonda GPSMAP
More informationNew Highly Productive Phased Array Ultrasonic Testing Machine for Aluminium Plates for Aircraft Applications
19 th World Conference on Non-Destructive Testing 2016 New Highly Productive Phased Array Ultrasonic Testing Machine for Aluminium Plates for Aircraft Applications Christoph HENKEL 1, Markus SPERL 1, Walter
More informationThe all new Sandvik RH460 down-the-hole Hammer. Sandvik Construction Tools, Consumables & Services
The all new Sandvik RH40 down-the-hole Hammer Sandvik Construction Tools, Consumables & Services At Sandvik we put safety first Sandvik Construction is committed to ensure safety and increase productivity
More informationEarthworks X200 Quick Reference Guide
Earthworks X200 Quick Reference Guide Part No. 875-0267-000 Rev. A1 Contents Dig a 1.0 m Deep Hole Using a Flat Plane 1 Extend a Level Excavation 3 Dig a 1.0 m Deep Hole Using a Flat Plane with a 5 Laser
More informationAUTOMATIC DREDGING PROFILE AND CONTOUR CONTROL
AUTOMATIC DREDGING PROFILE AND CONTOUR CONTROL Jay Wise 1 ABSTRACT Phillips and Jordan, a leading excavating and disaster recovery contractor, was faced with the challenge to manage a civil contract involving
More informationTorque & Drag & Buckling
Torque & Drag & Buckling Soft-string vs Stiff-string Models The aim of this presentation is to show the main differences between the 2 types of model used for Torque & Drag & Buckling analysis in the drilling
More informationSurvey Technical Support Notes October 2015
Survey Technical Support Notes October 2015 SonarMite with Trimble Access Overview: Trimble Access software, when connected to a SonarMite will store water depths associated with field measurements. Equipment:
More informationTesting of hull drag for a sailboat
Testing of hull drag for a sailboat Final report For Autonomous Sailboat Project In Professor Ruina s Locomotion and Robotics Lab, Cornell Jian Huang jh2524@cornell.edu Mechanical Engineering, MEng student
More informationTutorial for the. Total Vertical Uncertainty Analysis Tool in NaviModel3
Tutorial for the Total Vertical Uncertainty Analysis Tool in NaviModel3 May, 2011 1. Introduction The Total Vertical Uncertainty Analysis Tool in NaviModel3 has been designed to facilitate a determination
More informationCOPROD drill strings. for SmartROC C50 and SmartROC CL
COPROD drill strings for SmartROC C50 and SmartROC CL COPROD drill strings the best of both worlds COPROD is a unique, patented rock drilling system from Epiroc. It combines the high penetration rate and
More informationOptical Dissolved Oxygen Meter
Optical Dissolved Oxygen Meter HI764113 Rugged Optical Dissolved Oxygen Probe for Fresh and Saltwater Applications Digital, weighted probe No membranes No electrolytes No oxygen consumption No flow dependence
More informationProgramming a recess with interrupted cut
Tricks Following on from the article on parameterized programming, which featured in DECO Magazine no 33, we would now like to show you another example of PELD programming. Machining a recess can sometimes
More informationSoftware for electronic scorekeeping of volleyball matches, developed and distributed by:
Software for electronic scorekeeping of volleyball matches, developed and distributed by: Developed for the rules of USports 2017-18 As adopted by Ontario University Athletics for Men s & Women s Volleyball
More informationVIAFLO 96. Electronic 96 Channel Hand Held Pipettor
VIAFLO 96 Electronic 96 Channel Hand Held Pipettor VIAFLO 96 Unique Multichannel microplate pipetting is a growing task because of the need to increase productivity and improve the quality of the data
More informationKestrel HVK Gun Loader Sofware
www.kestrelmeters.com.au Kestrel HVK Gun Loader Sofware The Most Relied-Upon Pocket Weather Instruments in the World Making Work & Play Easier & Safer 1 Kestrel Pocket Weather Meters Kestrel Ballistics
More informationPowerDrive X6. Rotary Steerable System for high-performance drilling and accurate wellbore placement
Rotary Steerable System for high-performance drilling and accurate wellbore placement The PowerDrive X6 RSS maintains control under the most difficult conditions, bringing the benefits of rotary steerable
More informationZIPWAKE DYNAMIC TRIM CONTROL SYSTEM OUTLINE OF OPERATING PRINCIPLES BEHIND THE AUTOMATIC MOTION CONTROL FEATURES
ZIPWAKE DYNAMIC TRIM CONTROL SYSTEM OUTLINE OF OPERATING PRINCIPLES BEHIND THE AUTOMATIC MOTION CONTROL FEATURES TABLE OF CONTENTS 1 INTRODUCTION 3 2 SYSTEM COMPONENTS 3 3 PITCH AND ROLL ANGLES 4 4 AUTOMATIC
More informationSEMME269 - SQA Unit Code H2BK 04 Cutting and shaping using NC/CNC plasma or gas cutting machines
Cutting and shaping using NC/CNC plasma or gas cutting machines Overview This unit identifies the competences you need to carry out cutting and shaping operations using numerical control (NC) or computer
More informationPneumatic high-pressure controller Model CPC7000
Calibration technology Pneumatic high-pressure controller Model CPC7000 WIKA data sheet CT 27.63 Applications Automotive and avionics industry Industry (laboratory, workshop and production) Transmitter
More informationPneumatic drilling equipment
Pneumatic drilling equipment Contents Block cutters Magic Medium...2 Rombo I HD & II HD...4 Twingo...6 Down-the-hole machine Speedrill VH...8 Sharpening equipment Leon...10 Dust collectors Bermuda Junior...
More informationBIT User Manual. 1. About this manual. 2. Know your BIT 1.1. WARNING System Components
BIT User Manual About this manual WARNING Know your BIT System Components Operation Methods Maintenance, charging 3.3.1. Cleaning General handling Software Setup Calibrating the BIT Inclinometer calibration
More informationUBEC 1AT. AUTO TANK Fill System Installation, Operation, & Setup Instructions
Document Number: XE-ATA5PM-R1A UBEC 1AT AUTO TANK Fill System 08899155 Installation, Operation, & Setup Instructions Rev170906-EB-FRC PHYSICAL: 1302 WEST BEARDSLEY AVE ELKHART, IN 46514 WWW.ELKHARTBRASS.COM
More informationTechnology. Using Bluetooth
Bluetooth is a communication technology that makes it possible to send and receive data without using wires. Using the Bluetooth features, you can set up a wireless connection between your NXT and other
More informationIntroduction. Steel balls. Cage
Introduction linear rail.advantages. - Consists of a robust table and frame equipped with precision balls - Simplicity of design and compact size ensure optimum performance Table End plate Frame Steel
More informationValley. Controls. reliable. durable. precise. advanced. responsive
Valley Controls reliable durable precise advanced responsive Valley Control Panels TouchPro The TouchPro control panel with touch technology is designed to provide you with powerful yet user-friendly control
More informationWORKFORCE DEVELOPMENT
MAY 2016 WORKFORCE DEVELOPMENT Accident Investigation Overcoming Weakness Minnesota DNR Forensics = growth opportunity New approach for education Stewarding a landscape A MATTER OF CENTIMETERS Barre des
More informationSontek RiverSurveyor Test Plan Prepared by David S. Mueller, OSW February 20, 2004
Sontek RiverSurveyor Test Plan Prepared by David S. Mueller, OSW February 20, 2004 INTRODUCTION Sontek/YSI has introduced new firmware and software for their RiverSurveyor product line. Firmware changes
More informationRE545 reverse circulation Parts & tools guide
RE545 reverse circulation Parts & tools guide RECOMMENDED SAFETY PROCEDURES These are the primary generic hazards identified with the use of this product and the user should use this information as input
More information1. Outline of the newly developed control technologies
This paper describes a vertical lifting control and level luffing control design for newly developed, fully hydraulicdriven floating cranes. Unlike lattice boom crawler cranes for land use, the floating
More informationPneumatic high-pressure controller Model CPC7000
Calibration technology Pneumatic high-pressure controller Model CPC7000 WIKA data sheet CT 27.63 Applications Healthcare and avionics industry Industry (laboratory, workshop and production) Transmitter
More informationMisaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii
Operator s Manual Table of Contents Operator Safety... 1 Introduction... 2 Unpacking and Setup... 3 Unpacking... 3 Setup... 4 FLYER Overview... 5 FLYER Diagram... 5 Capabilities... 5 Control Panel... 6
More informationPress Release. Friction Stir Welding: Grenzebach extends its portfolio
Friction Stir Welding: Grenzebach extends its portfolio Higher dynamics, higher welding speeds, lower process forces and even higher quality welding seams and welding surfaces: at the Düsseldorf Schweissen
More informationAIR-X COMPACT AIR-X ON-LINE LUBRICANT AERATION MEASUREMENT. Technical Brochure ON RUNNING ENGINES
AIR-X COMPACT AIR-X ON-LINE LUBRICANT AERATION MEASUREMENT ON RUNNING ENGINES Technical Brochure 2015 Introduction The presence of air in the fluid of a working hydraulic system can cause significant performance
More informationRisk Assessment for Stone Quarry Mining is among the most hazardous activities all around the world, being always accompanied with different
Risk Assessment for Stone Quarry Mining is among the most hazardous activities all around the world, being always accompanied with different incidents, injuries, loss of lives, and property damages. Dimension
More informationAPA software instruction manual
1. Starting the program In order to start the control software for the APA device press APAxx shortcut located on the desktop of the supplied computer. XX corresponds to the current software version. When
More informationWL16 WATER LEVEL LOGGERS Submersible pressure transducer and USB datalogger combination
WL16 WATER LEVEL LOGGERS Submersible pressure transducer and USB datalogger combination Warning: Non-vented water level loggers may have readings with errors of up to 250mm due to barometric pressure changes.
More information2017 Edition GUIDANCE NOTE GN 8 INVERTER DRIVES FOR FANS AND PUMPS GN 8 - INVERTER DRIVES FOR FANS AND PUMPS
GUIDANCE NOTE GN 8 INVERTER DRIVES FOR FANS AND PUMPS 2017 Edition COMMISSIONING SPECIALISTS ASSOCIATION Page 1 GUIDANCE NOTE GN 8 INVERTER DRIVES FOR FANS AND PUMPS Written By C. Shearer COMPILED BY THE
More informationHand-held pressure calibrator with integrated pump Model CPH6600
Calibration technology Hand-held pressure calibrator with integrated pump Model CPH6600 WIKA data sheet CT 16.01 Applications Calibration service companies and service industry Measurement and control
More information3M Electrial Markets Division EMS. Electronic Marker System
3M Electrial Markets Division EMS Electronic Marker System 3M EMS Electronic Marker System The 3M Electronic Marker System helps eliminate guesswork. 3M markers operate even in the presence of metal conduits
More informationAdjustable Broaching Head 3. Fixed Braoching Heads 4. Broaching Bits Hexagonal 5. Broaching Bits Square 6. Broaching Bits Torx 7
Rotary Broaching Heads & Accessories The Broaching Toolholder is a device that enables the processing of regular shapes (hexagons, squares etc.) in through and blind holes. The Broaching Tool is inclined
More informationHydro. Tab Marine Engineering. Interceptor Trim Tabs. Born to live in the sea. 2017ver.1
Hydro Tab Interceptor Trim Tabs Born to live in the sea 2017ver.1 Designed to operate... Developed under NMEA 2000 protocol Compatible with NMEA 018 Hydrotab is an innovative patented trim system designed
More informationWireless Groundwater & Surface Water Data Transmission Maximize data quality Reduce operating costs Near real-time insight
Diver Telemetry Wireless Groundwater & Surface Water Data Transmission Maximize data quality Reduce operating costs Near real-time insight CONTROL 3 YOUR DATA IN STEPS Diver-NETZ Introduction Diver-NETZ
More informationInstruction Manual Dräger MSI P7 and MSI P7 plus
Dräger MSI GmbH Rohrstraße 32 58093 Hagen Tel.: +49-2331 / 9584-0 Fax: +49-2331 / 9584-29 e-mail: info@draeger-msi.de D 923; Edition 2011-01-01 Content 1. General Hints Page 4 2. The Instrument 2.1 Front
More informationMeasurement and control equipment need to be increasingly. often employable at a (large) distance. Setting up, reading out
e - S E N S E F r o m E i j k e l k a m p A g r i s e a r c h E q u i p m e n t e - S E N S E F r o m E i j k e l k a m p A g r i s e a r c h E q u i p m e n t Measurement and control equipment need to
More informationT i m i n g S y s t e m s. RACEAMERICA, Inc. P.O. Box 3469 Santa Clara, CA (408)
RACEAMERICA T i m i n g S y s t e m s Demo Tree Controller Owner s Manual Models 3204D, 3204DW & 3204DX Rev D RACEAMERICA, Inc. P.O. Box 3469 Santa Clara, CA 95055-3469 (408) 988-6188 http://www.raceamerica.com
More informationBUYER S GUIDE AQUAlogger 520
OCEAN & ENVIRONMENTAL BUYER S GUIDE AQUAlogger 520 Mini Temperature and Pressure Logger AQUAlogger 520 Aquatec s primary temperature and depth model, the AQUAlogger 520, combines years of product development
More informationREACTOR 40 MECHANICAL Configuration Guide
REACTOR 40 MECHANICAL Configuration Guide Important Safety Information WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information.
More informationPerfect Golf Quick Start Guide
Quick Start Guide Perfect Golf Quick Start Guide To play Perfect Golf you must first have purchased the following: 1. A SkyTrak Launch Monitor 2. Have an active Play and Improve Package 3. Have purchased
More informationGREAT THINGS TO KNOW ABOUT YOUR. IRwin Methane Leak Detector
11 GREAT THINGS TO KNOW ABOUT YOUR IRwin Methane Leak Detector 1 START UP Turn the device on and wait a maximum of 2 minutes, while the instrument is warming up, and performing a self test. It also connects
More informationGolfshot : Golf GPS Android User Guide
Golfshot : Golf GPS Android User Guide Version 3.5 Scorecard Version 3.5 QUICK TIPS: New in 3.5: Track Menu Track Menu Press the Golf Ball icon in the upper left corner to slide down the Track Menu. Here
More informationTechnology. Using Bluetooth
Bluetooth is a communication technology that makes it possible to send and receive data without using wires. Using the Bluetooth features, you can set up a wireless connection between your NXT and other
More informationAngstrom E-Beam Instructions. PROCESS CHECKS: the tooling factors of each metal; Ti/Au layer for wire bonding pull test.
Angstrom E-Beam Instructions Tool Manager: Joe Palmer (jpalmer@princeton.edu) Office: 8-4706; Cell:609-751-1353 Backup: David Barth (dbarth@princeton.edu) Office: 8-4626; Cell: 610-405-8227 PROCESS CHECKS:
More informationPressure & Vacuum Measurement. Series 370. Solutions. Stabil-Ion Vacuum gauge and Controller
w w w. m k s i n s t. c o m Pressure & Vacuum Measurement Solutions Series 370 Stabil-Ion Vacuum gauge and Controller Features & Benefits All-metal, rack-mount controller for Stabil-Ion and Convectron
More informationMAKES A DIFFERENCE SANDVIK PARTS EVOLUTION
INNOVATION THAT MAKES A DIFFERENCE SANDVIK PARTS EVOLUTION WWW.CONSTRUCTION.SANDVIK.COM B10-6008ENG Sandvik Construction. SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in
More informationTHE PMI AUTOMATED GAS/HELIUM PYCNOMETER PYC-G100A
THE PMI AUTOMATED GAS/HELIUM PYCNOMETER PYC-G100A Not just products...solutions! Applications Gas/Helium pycnometery measures the true volume and density of samples like coal, char and ash particles, etc.
More informationPHOENIX L300i Best-in-class Helium Leak Detectors
180.85.02 Best-in-class Helium Leak Detectors The perfect Helium leak detector matching your demands The helium leak detector opens up new dimensions of productivity and reliability for your applications.
More information23 RD INTERNATIONAL SYMPOSIUM ON BALLISTICS TARRAGONA, SPAIN APRIL 2007
23 RD INTERNATIONAL SYMPOSIUM ON BALLISTICS TARRAGONA, SPAIN 16-20 APRIL 2007 AN INVESTIGATION INTO THE INTERRELATION BETWEEN THE INTERNAL AND EXTERNAL BALLISTICS OF FIRING A TP-T TANK AMMUNITION M. H.
More informationIEC C LASSIFICATIONS:
Enrich life Introducing Astral Introducing the Astral 100 and Astral 150 life support ventilators. From initial setup to everyday use, Astral offers greater freedom, confident care and designed efficiency
More informationElectronics the Art of Blasting turned Blasting Science. Sandy Tavelli / John Alkins
Electronics the Art of Blasting turned Blasting Science Sandy Tavelli / John Alkins The Search for a Better Way Detonator technology has evolved over the decades from goose quills filled with black powder
More informationThe cost-efficient fixing for flexible use in non-cracked concrete VERSIONS. zinc-plated steel stainless steel hot-dip galvanised steel
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS APPROVALS zinc-plated steel stainless steel hot-dip galvanised steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60,
More informationSTS ICP-RIE. Scott Munro (2-4826,
STS ICP-RIE LOCATION: Plasma Etch Area PRIMARY TRAINER: Scott Munro (2-4826, email@address.com) 1. OVERVIEW The STS ICP-RIE is available to users who require deep anisotropic silicon etching with near
More informationSeries 7250 Ruska High-Speed Digital Pressure Controller. GE Sensing. Features
Features Pressure ranges from 0 to 5 and 0 to 3000 psi (0 to 400 mbar and 0 to 210 bar) xi and 7250i provide advanced precision of 0.005% of reading provides 0.003% of full scale precision Stability: 0.0075%
More informationDP Ice Model Test of Arctic Drillship
Author s Name Name of the Paper Session DYNAMIC POSITIONING CONFERENCE October 11-12, 211 ICE TESTING SESSION DP Ice Model Test of Arctic Drillship Torbjørn Hals Kongsberg Maritime, Kongsberg, Norway Fredrik
More informationModeling of Hydraulic Hose Paths
Mechanical Engineering Conference Presentations, Papers, and Proceedings Mechanical Engineering 9-2002 Modeling of Hydraulic Hose Paths Kurt A. Chipperfield Iowa State University Judy M. Vance Iowa State
More information[MYLAPS INTEGRATION]
2018 The Race Director MyLaps Integration Manual [MYLAPS INTEGRATION] This document explains how to manage the results data between your MyLaps readers and Race Director using manual file transfers. Contents
More informationMitos Fluika Pressure and Vacuum Pumps Datasheet
Unit 1, Anglian Business Park, Orchard Road, Royston, Hertfordshire, SG8 5TW, UK T: +44 (0)1763 242491 F: +44 (0)1763 246125 E: sales@dolomite-microfluidics.com W: www.dolomite-microfluidics.com Dolomite
More informationDM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
More informationRE542/543 reverse circulation Parts & tools guide
RE542/543 reverse circulation Parts & tools guide RECOMMENDED SFETY PROCEDURES These are the primary generic hazards identified with the use of this product and the user should use this information as
More information973-SF 6 Analyzer. Precise and Stable SF 6 Gas Analyzer REFLECTING YOUR STANDARDS
Precise and Stable SF 6 Gas Analyzer Simultaneous measurement of humidity, SF 6 purity and SO 2 concentration Integrated gas recovery system with automatic pump back Fully automated SF 6 gas testing Fundamental
More informationVibrating Wire Load Cell (3, 4, 5 And 6 Gauge Cells) User Manual
Vibrating Wire Load Cell (3, 4, 5 And 6 Gauge Cells) User Manual Man 188 1.1.0 06/08/2014 Chris Rasmussen Philip Day Chris Rasmussen Manual No. Revision Date Originator Checked Authorised for Issue User
More informationAutomatic Isokinetic Sampler. ST5 Evo
Automatic Isokinetic Sampler ST5 Evo Automatic Isokinetic Sampler ST5 Evo Moreover, in case of pump failure, the CU can work with a spare Dado PU unit or with any pump capable to supply the needed flowrate,
More informationUsing the GHIN Handicap Allocation Utility with GHP Golfer
Using the GHIN Handicap Allocation Utility with GHP Golfer In order to gather Hole by Hole (HBH) scores to be used with the GHIN Handicap Allocation Utility, the golf club must have individual tee information
More informationPremium Auto Feed System. Products and Solutions for Assembly
Premium Auto Feed System Products and Solutions for Assembly ASG Automation Product Group Engineered Performance The ASG Automation group provides pre-engineered and custom solutions to meet the comprehensive
More informationCryostream 800 Series
Cryostream 800 Series Cryostream 800 Series Nearly 30 years after the invention of the first Cryostream Cooler, Oxford Cryosystems is proud to announce the launch of the new 800 series Cryostream. The
More informationFAS-W. Features. Applications. Automatic condensation hygrometer
FAS-W HUMIDITY ANALYZER Automatic condensation hygrometer the «FAS-W» Moisture Analyzer automatic condensation hygrometer can measure both the volume fraction of moisture and the dew point temperature
More informationTactical Advance Series Tactical Advance HD Series. Simplifying CNC Plasma Cutting.
Tactical Advance Series Tactical Advance HD Series www.tacticalcnc.com Technology at work for you What makes the Tactical CNC Advantage and Advantage HD Series the best automated plasma cutting solution
More informationWhat's New in VoluMill 7.0/7.1
What's New in VoluMill 7.0/7.1 Proprietary and restricted rights notice This software and related documentation are proprietary to Celeritive Technologies Inc. 2015 Celeritive Technologies Inc. All Rights
More informationA Low Cost Digital Angle Gage, version 3
A Low Cost Digital Angle Gage, version 3 By R. G. Sparber Copyleft protects this document. 1 Sometimes re-inventing the wheel has advantages. What you see here is just a variation on a sine bar. The accuracy
More informationWade Reynolds 1 Frank Young 1,2 Peter Gibbings 1,2. University of Southern Queensland Toowoomba 4350 AUSTRALIA
A Comparison of Methods for Mapping Golf Greens Wade Reynolds 1 Frank Young 1,2 Peter Gibbings 1,2 1 Faculty of Engineering and Surveying 2 Australian Centre for Sustainable Catchments University of Southern
More informationMEASUREMENT COMMUNICATION INSIGHT
Temperature & Depth MEASUREMENT COMMUNICATION INSIGHT CONTENTS Introduction to Aquatec Measuring Temperature and Depth 2 3 Aquatec s Temperature and Depth Loggers AQUAlogger 520 AQUAlogger 530 AQUAlogger
More informationMethod for HOBO Water Level Logger Deployment and Assessing Hydroperiods on Tidal Marsh Platforms
PARTNERSHIP FOR THE DELAWARE ESTUARY Science Group Method for HOBO Water Level Logger Deployment and Assessing Hydroperiods on Tidal Marsh Platforms Date Prepared: 09/26/2016 Prepared By: LeeAnn Haaf Suggested
More informationIntroducing Astral. Greater freedom. Confident care. Designed efficiency
Enrich life Introducing Astral From initial setup to everyday use, the Astral 100 and Astral 150 life support ventilators offer greater freedom, confident care and designed efficiency to enrich life for
More informationASSESSMENT OF CORRECTNESS OF INFORMATION OBTAINED FROM AUTOMATIC IDENTIFICATION OF SHIP S SYSTEM (AIS)
Journal of KONES Powertrain and Transport, Vol. 17, No. 3 2010 ASSESSMENT OF CORRECTNESS OF INFORMATION OBTAINED FROM AUTOMATIC IDENTIFICATION OF SHIP S SYSTEM (AIS) Henryk niegocki Gdynia Maritime University,
More informationControl the air. Control your business.
Serpent ventilation A complete ventilation system for successful tunneling and mining operations, including system design, fan station, ducting and installation 1 Control the air. Control your business.
More informationQuintic Automatic Putting Report
Quintic Automatic Putting Report Tutorial www.quintic.com Introduction The Quintic Automatic Putting Report is designed to work as an add on to our premier Quintic Biomechanics analysis software. Auto
More informationASSESSMENT OF CORRECTNESS OF INFORMATION OBTAINED FROM AUTOMATIC IDENTIFICATION OF SHIP S SYSTEM (AIS)
ASSESSMENT OF CORRECTNESS OF INFORMATION OBTAINED FROM AUTOMATIC IDENTIFICATION OF SHIP S SYSTEM (AIS) Henryk Śniegocki Akademia Morska w Gdyni, Katedra Nawigacji Aleja Jana Pawła II 3, 81-345 Gdynia,
More informationidive Color New Armored with Multi-Transmitter Side Mount Mode RATIO idive Easy idive Deep idive Tech+ with Multi-Transmitter
New www.ratio-computers.com idive Color with Multi-Transmitter Armored with Multi-Transmitter Side Mount Mode RATIO idive Easy idive Deep idive Tech+ Dive Modes Mix Deco model (Algorithm) Algorithm adjustment
More informationDynamic Characteristics of the End-effector of a Drilling Robot for Aviation
International Journal of Materials Science and Applications 2018; 7(5): 192-198 http://www.sciencepublishinggroup.com/j/ijmsa doi: 10.11648/j.ijmsa.20180705.14 ISSN: 2327-2635 (Print); ISSN: 2327-2643
More informationIMCA DP Station Keeping Bulletin 04/18 November 2018
DP STATION KEEPING BULLETIN IMCA DP Station Keeping Bulletin 04/18 November 2018 The following event trees have been compiled from recent reports received by IMCA. The originators granted IMCA permission
More informationGolfLogix: Golf GPS. User Guide for: iphone 3G & 3GS. Version 1.0. Software Release 1.0
GolfLogix: Golf GPS User Guide for: iphone 3G & 3GS Version 1.0 Software Release 1.0 1 Table of Contents Topic Page Topic Page Getting Started Statistics Downloading the GolfLogix Application 4 Statistic
More informationApproach. owner s manual
Approach owner s manual 2009 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, USA Tel. (913) 397.8200 or (800) 800.1020 Fax (913) 397.8282 Garmin
More information