CERTIFICATE OF COMPLIANCE
|
|
- Earl Dennis
- 6 years ago
- Views:
Transcription
1 FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA USA T: F: CERTIFICATE OF COMPLIANCE HAZARDOUS LOCATION ELECTRICAL EQUIPMENT PER CANADIAN REQUIREMENTS This certificate is issued for the following equipment: FCa4cF1Y0fghijklm CoriolisMaster Integral single seal double seal with option TE2 XP-IS / I / 1 / BCD / T6 T1* - 3KXF000028G0009 DIP / II, III / 1 / EFG / T6* I / 1 / Ex d ia / IIB+H2 / T6 T1* - 3KXF000028G0009 h = material of wetted parts; A1, A2, H1, H2, C1, C2, T1 or L1 i = Flow calibration; single digit alpha numeric code not critical to safety j = Density Calibration; single digit numeric code not critical to safety k = Connection Design/Transmitter Housing Type/Transmitter Housing Material/ Cable Glands; D1, D2, D3, D4, D5, D6, D7, or D8 Additional Output 2; DSN, DSG, DSA, or DST Page 1 of 7
2 FCa4cF1efghijY0lm CorioisMaster - Remote sensor single seal double seal with option TE2 XP-IS / I / 1 / BCD / T6 T1* - 3KXF000028G0009 DIP / II, III / 1 / EFG / T6*; I / 1 / Ex d ia / IIB+H2 / T6 T1* - 3KXF000028G0009 e = Connection Design/Connection Box Material/Cable glands; U1, U2, A1 or A2 h = Material of wetted parts; A1, A2, H1, H2, C1, C2, T1 or L1 i = Flow calibration; 2-digit alpha code not critical to safety j = Density Calibration; 2-digit numeric code not critical to safety l = Outputs; Y0 m = Power Supply; Y FCT4cF1klm CoriolisMaster Transmitter only XP-IS / I / 1 / BCD / T6 T1* - 3KXF000028G0009 DIP / II, III / 1 / EFG / T6*; I / 1 / Ex d ia / IIB+H2 / T6 T1* - 3KXF000028G0009 k = Connection Design/Transmitter Housing Type/Transmitter Housing Material/ Cable Glands; R1, R2, R3, R4, R5, R6, R7, or R8 Page 2 of 7
3 Additional Output 2; DSN, DSG, DSA, or DST FCa4cF2Y0fghijklm CoriolisMaster Integral single seal double seal with option TE2 NI / I, II, III / 2 / ABCDEFG / T6 T1* I / 2 / Ex na / IIC / T6 T1* h = material of wetted parts; A1, A2, H1, H2, C1, C2, T1 or L1 i = Flow calibration; single digit alpha numeric code not critical to safety j = Density Calibration; single digit numeric code not critical to safety k = Connection Design/Transmitter Housing Type/Transmitter Housing Material/ Cable Glands; D1, D2, D3, D4, D5, D6, D7, or D8 Additional Output 2; DSN, DSG, DSA, or DST 3. When m = C provision shall be made external to the equipment, to provide the transient protection device to be set at a level not exceeding 140 % of the peak rated voltage value of 42 V. FCa4cF2efghijY0lm CorioisMaster - Remote sensor single seal double seal with option TE2 NI / I, II, III / 2 / ABCDEFG / T6 T1* I / 2 / Ex na / IIC / T6 T1* Page 3 of 7
4 , IP68 e = Connection Design/Connection Box Material/Cable glands; U1, U2, A1 or A2 h = Material of wetted parts; A1, A2, H1, H2, C1, C2, T1 or L1 i = Flow calibration; 2-digit alpha code not critical to safety j = Density Calibration; 2-digit numeric code not critical to safety l = Outputs; Y0 m = Power Supply; Y FCT4cF2klm CoriolisMaster Transmitter only NI / I, II, III / 2 / ABCDEFG / T6 T1* I / 2 / Ex na / IIC / T6 T1* k = Connection Design/Transmitter Housing Type/Transmitter Housing Material/ Cable Glands; R1, R2, R3, R4, R5, R6, R7, or R8 Additional Output 2; DSN, DSG, DSA, or DST Page 4 of 7
5 3. When m = C provision shall be made external to the equipment, to provide the transient protection device to be set at a level not exceeding 140 % of the peak rated voltage value of 42 V. Equipment Ratings: FCa4cF1Y0fghijklm CoriolisMaster Integral single seal double seal with option TE2 Explosionproof with intrinsically safe communications per control drawing - 3KXF000028G0009 for Class I, Division 1, Groups BC&D; Dust-ignitionproof for Class II Division 1, Groups EF&G and Class III, Division 1 and 2; Flameproof with intrinsically safe communications options for Class I, Zone 1 Group IIB+H2; Protected by enclosure with intrinsically safe communications options for Zone 21 Group IIIC hazardous (classified) locations. Temperature class T6 T1 for Class I dependent on ambient temperature and process temperature per ABB instruction Manual. Temperature class T6 for Class II and III dependent on ambient temperature and process temperature per ABB instruction Manual. Temperature class T80 C for Zone 21 dependent on ambient temperature and process temperature per ABB instruction Manual. Dual Seal or Single Seal per ANSI/ISA FCa4cF1efghijY0lm CorioisMaster - Remote sensor single seal double seal with option TE2 Explosionproof with intrinsically safe communications per control drawing - 3KXF000028G0009 for Class I, Division 1, Groups BC&D; Dust-ignitionproof for Class II Division 1, Groups EF&G and Class III, Division 1 and 2; Flameproof with intrinsically safe communications options for Class I, Zone 1 Group IIB+H2; Protected by enclosure with intrinsically safe communications options for Zone 21 Group IIIC hazardous (classified) locations. Temperature class T6 T1 for Class I dependent on ambient temperature and process temperature per ABB instruction Manual. Temperature class T6 for Class II and III dependent on ambient temperature and process temperature per ABB instruction Manual. Temperature class T80 C for Zone 21 dependent on ambient temperature and process temperature per ABB instruction Manual. Dual Seal or Single Seal per ANSI/ISA FCT4cF1klm CoriolisMaster Transmitter only Explosionproof with intrinsically safe communications per control drawing - 3KXF000028G0009 for Class I, Division 1, Groups BC&D; Dust-ignitionproof for Class II Division 1, Groups EF&G and Class III, Division 1 and 2; Flameproof with intrinsically safe communications options for Class I, Zone 1 Group IIB+H2; Protected by enclosure with intrinsically safe communications options for Zone 21 Group IIIC hazardous (classified) locations. Temperature class T6 T1 for Class I dependent on ambient temperature and process temperature per ABB instruction Manual. Temperature class T6 for Class II and III dependent on ambient temperature and process temperature per ABB instruction Manual. Temperature class T80 C for Zone 21 dependent on ambient temperature and process temperature per ABB instruction Manual. FCa4cF2Y0fghijklm CoriolisMaster Integral single seal double seal with option TE2 FCa4cF2efghijY0lm CorioisMaster - Remote sensor single seal double seal with option TE2 Nonincendive for Class I, II and III, Division 2, Groups ABCDEF&G; Type of protection na for Class I, Zone 2, Group IIC Hazardous (Classified) Locations. Temperature class T6 T1 for Class I dependent on ambient temperature and process temperature per ABB instruction Manual. Dual Seal or Single Seal per ANSI/ISA FCT4cF2klm CoriolisMaster Transmitter only Nonincendive for Class I, II and III, Division 2, Groups ABCDEF&G; Type of protection na for Class I, Zone 2, Group IIC Hazardous (Classified) Locations. Temperature class T6 T1 for Class I dependent on ambient temperature and process temperature per ABB instruction Manual. Page 5 of 7
6 FM Approved for: ABB Automation Products GmbH Göttingen, Germany Page 6 of 7
7 This certifies that the equipment described has been found to comply with the following Approval Standards and other documents: CSA C22.2 No CSA C22.2 No CAN/CSA C22.2 No. 142-M CAN/CSA C22.2 No. 213-M CAN C22.2 No CAN C CAN C CAN C CAN C CAN/CSA C22.2 No CSA C22.2 No ANSI/ISA Original Project ID: Approval Granted: October 22, 2015 Subsequent Revision Reports / Date Approval Amended Report Number Date Report Number Date RR December 29, 2015 FM Approvals LLC J.E. Marquedant Manager of Electrical Systems 29 December 2015 Date Page 7 of 7
CERTIFICATE OF COMPLIANCE
FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 02062 USA T: 781 762 4300 F: 781-762-9375 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL
More informationCertificate of Compliance
FF0002 Certificate of Compliance Certificate: 70024080 Date Issued: 2017-07-04 Issued to: ecom instruments GmbH Industriestrasse 2 Assamstadt, Baden Wurttemburg 97959 GERMANY Attention: Kevin Spence The
More informationCertificate of Compliance
Certificate of Compliance Certificate: 2419437 Master Contract: 203012 Issued to: ABB Automation Products GmbH 72 Schillerstrasse Minden, 32425 Germany Attention: Ralf Schaffer The products listed below
More informationCertificate of Compliance
Certificate of Compliance Certificate: 1127056 Master Contract: 154490 Issued to: Fisher Controls International LLC 205 S Center St Marshalltown, IA 50158 USA Attention: Daniel G. Moyer The products listed
More informationHazardous Location Coding System - For Division. Class I / II / III, Division 1 / 2 Type of Protection. XP = Explosionproof
Hazardous Location Equipment - Canada Equipment listed in this category for Hazardous Locations is also suitable for installations in areas that are non-hazardous locations and, unless referenced in the
More informationCertificate of Conformity
Certificate Holder: ABB Automation Products GmbH Schillerstrasse 72 D-32425 Minden GERMANY Electrical Apparatus: Type of Protection: 2600T Pressure Transmitter Models 265../267../269.. Communication protocols:
More informationCertificate of Compliance
FF0 002 Certificate of Compliance Certificate: 1714037 (LR) Issued to: Emerson Process Management GmbH & Co. OHG Industriestrasse 1 Hasselroth, 63594 GERMANY Attention: Gabriele Blendin The products listed
More informationTechnical Data. Dimensions
0102 Model Number Features Comfort series 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories BF 18 Mounting flange, 18 mm EXG-18 Quick mounting bracket with dead stop Technical Data specifications
More informationTechnical Data. Dimensions
0102 Model Number Features Comfort series 15 mm flush Accessories MHW 01 Modular mounting bracket MH 04-2057B Mounting aid for VariKont and +U1+ V1-G-N-2M-PUR Female cordset, M12, 2-pin, NAMUR, PUR cable
More informationDimensions. Technical Data General specifications Switching element function Rated operating distance s n 10 mm
Dimensions M30x1,5 5 40 37 0102 Model Number 36 LED Features Comfort series 10 mm embeddable Connection BN BU Accessories BF 30 Mounting flange, 30 mm L+ L- Technical Data specifications Switching element
More informationTechnical Data. Dimensions
00 Model Number Features Comfort series 30 mm non-flush Accessories MHW 0 Modular mounting bracket V-G Female connector, M, 4-pin, field attachable V-W-N-M-PUR Female cordset, M, -pin, NAMUR, PUR cable
More informationHazardous Location Coding System - NEC 500. Type of Protection. XP = Explosionproof. IS = Intrinsically Safe Apparatus
Hazardous Location Equipment - United States Equipment listed in this category for Hazardous (Classified) Locations is also suitable for installations in areas that are unclassified locations and, unless
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 5 mm
00 Model Number Features 5 mm flush Usable up to SIL acc. to IEC 6508 Accessories V-G Female connector, M, -pin, field attachable V-W Female connector, M, -pin, field attachable V-G-N-M-PUR Female cordset,
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 1.5 mm
0102 Model Number Features 1.5 mm flush Accessories BF 8 Mounting flange, 8 mm Technical Data specifications Switching element function NAMUR, NC Rated operating distance s n 1.5 mm Installation flush
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
More informationBA307C & BA308C Intrinsically safe loop-powered 3½ digit panel mounting indicators issue 9
BA307C & BA308C Intrinsically safe loop-powered 3½ digit panel mounting indicators issue 9 Issue: 9 22 nd March 2013 2 CONTENTS 1. Description 2. Operation 3. Intrinsic Safety Certification 3.1 ATEX certificate
More informationTechNote FM APPROVAL: HAZARDOUS LOCATION EQUIPMENT CLASSIFICATION
TechNote FM APPROVAL: HAZARDOUS LOCATION EQUIPMENT CLASSIFICATION Equipment listed in this guide for Hazardous (Classified) Locations is also suitable for installations in areas that are unclassified locations
More informationTechnical Data. Dimensions
00 Model Number Features mm flush Usable up to SIL acc. to IEC 6508 Accessories V-G Female connector, M, -pin, field attachable V-W Female connector, M, -pin, field attachable V-G-N-M-PUR Female cordset,
More informationTechnical Data. Dimensions
0102 Model Number Features 6 mm flush Usable up to SIL 3 acc. to IEC 61508 Application Danger! In safety-related applications the sensor must be operated with a qualified fail safe interface from Pepperl+Fuchs,
More informationInductive slot sensor
0102 Model Number Features 3.5 mm slot width Usable up to SIL 3 acc. to IEC 61508 Nonferrous targets Application Danger! In safety-related applications the sensor must be operated with a qualified fail
More informationTechnical Data. Dimensions
0102 Model Number Features 2 mm flush Usable up to SIL2 acc. to IEC 61508 Technical Data specifications Switching element function NAMUR, NC Rated operating distance s n 2 mm Installation flush Output
More informationTechnical Data. Dimensions
0102 Model Number Features 10 mm flush Shielded PUR cable for oil and gas sector Accessories BF 30 Mounting flange, 30 mm Technical Data specifications Switching function Normally closed (NC) Output type
More informationDimensions. Technical Data General specifications Switching element function Rated operating distance s n 5 mm
Dimensions M18x1 37 40 4 0102 24 LED Model Number Features 5 mm embeddable Usable up to SIL2 acc. to IEC 61508 Connection BN BU Accessories L+ L- EXG-18 Quick mounting bracket with dead stop BF 18 Mounting
More informationIECEx Certificate of Conformity
Certificate No.: IECEx KEM 09.0016 IECEx Certificate of Conformity Date of Issue: 2013-02-22 Issue No.: 3 Page 2 of 4 Manufacturer: Endress+Hauser GmbH+Co. KG Hauptstraße 1 79689 Maulburg Germany Additional
More informationIA CERTIFICATE (Annual review required by MASC covered by an additional letter) (Revision 2- Review & Review)
Certificate Number: MASC MS/11-127X Issue: 09 October 2017 Expire: 09 October 2020 Page: 1 of 5 IA CERTIFICATE (Annual review required by MASC covered by an additional letter) (Revision 2- Review & Review)
More informationTechnical Data. General specifications. Rated operating distance s n 2 mm
0102 Model Number Features 2 mm flush Usable up to SIL 2 acc. to IEC 61508 Technical Data specifications Switching function Normally closed (NC) Output type NAMUR Rated operating distance s n 2 mm Installation
More informationUser s Manual EJX/EJA-E Series NEPSI Certification [Option code: /NF2, /NS21, /NS24 and /NS25] IM 01C25A00-12E
User s Manual EJX/EJA-E Series NEPSI Certification [Option code: /NF2, /NS21, /NS24 and /NS25] 12th Edition 1 1. Introduction Thank you for purchasing the DPharp electronic pressure transmitter. This manual
More informationTechnical Specifications
V200P Pneumatic Positioner Input range: 3-5 PSI 20-00 kpa Supply pressure: 45 PSI < MPa Linearity error:
More informationTechnical Data. Dimensions
0102 Model Number Features Comfort series 15 mm non-flush Stainless steel housing Accessories BF 30 Mounting flange, 30 mm Technical Data specifications Switching element function NAMUR, NC Rated operating
More informationTechnical Data. General specifications. Rated operating distance s n 5 mm
0102 Model Number Features 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-18 Quick mounting bracket with dead stop BF 18 Mounting flange, 18 mm Technical Data specifications Switching
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 2 mm
0102 Model Number Features 2 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-12 Quick mounting bracket with dead stop BF 12 Mounting flange, 12 mm Technical Data specifications Switching
More informationGeneral Specifications
General Specifications YVP110 Advanced Valve Positioner GS 21B04C01-01E FEATURES Model YVP110 FOUNDATION fieldbus TM Valve Positioner accepts digital communication to control a pneumatic actuator mounted
More informationDimensions. Technical Data General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm
Dimensions 65 GW2 40 35 9 5 GW1 14 11 9 5.4 M20 x 1.5 0102 Model Number S M12 x 1.5 Features 77.5 LED V Direct mounting on standard actuators Compact and stable housing with terminal compartment connection
More informationSafety Instructions Liquiphant FailSafe FTL80, FTL81, FTL85
XA01537F-A/00/EN/01.16 71333275 Products Solutions Services Safety Instructions Liquiphant FailSafe FTL80, FTL81, FTL85 0Ex ia IIC T6 Ga X Ga/Gb Ex ia IIC T6 X Document: XA01537F-A Safety instructions
More informationXMO2. Panametrics Smart Oxygen Analyzer. Applications. Features. bhge.com. An oxygen transmitter for use in:
XMO2 Panametrics Smart Oxygen Analyzer Applications An oxygen transmitter for use in: Inerting/blanketing liquid storage tanks Reactor feed gases Centrifuge gases Catalyst regeneration Solvent recovery
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA0000123 This is to certify: That the Pressure Transmitter with type designation(s) SITRANS P series DS III, P310, P410 Issued to Siemens AG - Process Industries
More informationIPH 2 & IPX 2. Features Type 4X & Explosion-Proof Current-to-Pressure (I/P) Transmitters. Approved for Use with Natural Gas.
February 2018 Description These 2-wire (loop-powered) I/P transmitters accept a current signal (such as 4-20mA) from a DCS, PLC or PC-based control system. They convert the current signal to a pneumatic
More informationATM.ECO/IS - Analog Transmitter with Temperature compensation
Pressure Transmitter - FM / FM-C certified ATM.ECO/IS - Analog Transmitter with Temperature compensation CUSTOMER BENEFITS Certificate: FM, FM-C & IECEx & ATEX Entry level series into precision pressure
More information9700 Transmitter Submersible hydrostatic level transmitter
Specification sheet IP0078 October 2007 Level 9700 Transmitter Submersible hydrostatic level transmitter Description The 9700 series hydrostatic level transmitter is designed to perform in the most arduous
More informationATM.1ST/Ex - High Precision Transmitter
Pressure Transmitter - ATEX / IECEx certified ATM.1ST/Ex - High Precision Transmitter CUSTOMER BENEFITS Certificate: ATEX, IECEx & EAC High measurement accuracy is ensured by sophisticated digital temperature
More informationTechnical Datasheet. D Series SMART Pressure Transmitter Model: DPC D-Series. Key Features. Series Overview. Product applications
Technical Datasheet D Series SMART Pressure Transmitter Model: DPC-2000 Key Features ATEX - Flameproof and Intrinsically Safe IECEx - Flameproof and Intrinsically Safe SIL 2 certificate Compliant to NAMUR
More informationReg No: 1999/027771/07 ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS
Government Approved Test Laboratory (Previously AIA) Reg No: 1999/027771/07 ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS ZEST
More informationSupplementary Operator s Manual 42/24-14 EN Rev. 3
Advance Optima Continuous Gas Analyzers AO2000 Series with Uras26, Magnos206, Caldos25, Caldos27 Designed per Category 3G for Measurement of Flammable Gases ( Safety Concept ) and Non-flammable Gases Supplementary
More informationSiemens AG psi (6 bar) 145 psi (10 bar) 464 psi (32 bar) 1450 psi (100 bar) 3626 psi (250 bar) 8700 psi (600 bar) psi (800 bar)
Technical specifications SITRANS P, DS III series Input Measured variable Spans (infinitely adjustable) or nominal measuring range and max. permissible test pressure HART Gauge pressure Span (min.... max.)
More informationTorque Tube TB300 Digital Transmitters
Page 1 of 7 7E.300-E Issue 4-2009 Description Series TB300 torque tube liquid level instruments utilize the buoyancy exerted on a displacer when immersed in a liquid. The buoyancy on the displacer is proportional
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the Endura AZ20 / AZ30 measuring system Manufactured by: ABB Ltd Oldends Lane Stonehouse Gloucestershire GL10 3TA has been assessed by Sira Certification
More informationTechnical Data. General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm. Short-circuit protection
0102 Model Number Features Direct mounting on standard actuators Compact and stable housing Fixed setting EC-Type Examination Certificate TÜV99 ATEX 1479X Usable up to SIL2 acc. to IEC 61508 Accessories
More informationNZQA registered unit standard version 3 Page 1 of 7. Plan electrical installations for explosive atmospheres
Page 1 of 7 Title Plan electrical installations for explosive atmospheres Level 5 Credits 8 Purpose This unit standard is intended for use in the training and assessment of people who work with electrical
More informationGeneral Specifications
General Specifications YVP110 Advanced Valve Positioner FEATURES Model YVP110 FOUNDATION fieldbus TM Valve Positioner accepts digital communication to control a pneumatic actuator mounted to a control
More informationElectropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765
Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765 Application Single-acting positioner for attachment to pneumatic control valves. Supplied with either an electric input signal from
More informationTechnical Datasheet. Pressure Transmitter: Analogue Series 387. Performance characteristics. Product applications. How can we help you?
Technical Datasheet Pressure Transmitter: Analogue Series 387 387 ISSUE G High Accuracy ± 0.15%. Ranges from 1 bar to 1000 bar. 4 : 1 turndown. 4-20mA analogue with digital communications. 316 stainless
More informationIA CERTIFICATE (Revision 3 Revised for Annual Review) Hazel Grove Stockport Cheshire SK14 6NG United Kingdom
Certificate Number: MASC MS/11-358X Issued: 22 September 2014 Expire: 22 September 2015 Page: 1 of 5 IA CERTIFICATE (Revision 3 Revised for Annual Review) IN TERMS OF REGULATION 21.17.2 OF THE MINERALS
More informationTwo-Wire In Situ Oxygen Analyzer (550 to 1400 C)
Product Data Sheet PDS 106-581.A01 September, 2007 Model 5081FG Two-Wire In Situ Oxygen Analyzer (550 to 1400 C) Intrinsically safe: ATEX, Zone 1, EEx ia IIC T4 Class I, Div. I, Gr. A, B, C, D T4 Operates
More informationPT-400 User Manual APG
PT-400 User Manual APG R Doc #9002825 Rev D1, 11/17 Table of Contents Introduction... iii Warranty Statement... iv Chapter 1: Specifications and Options... 1 Dimensions...1 Specifications... 2 Model Number
More informationL (up to 25 m) Electronic part. working temp.: Ñ IP 66 / IP67. Mounting bracket ÐÑ. Sensor type. working temp.:
Smart level probe type APC-2000ALW/L Programmable zero shift, range and damping ratio 4...20 ma output signal + HART protocol Accuracy 0,16% Local display Intrinsic safety certificate (ATEX, IECEx) II
More informationModel 261GR for gauge pressure Model 261AR for absolute pressure
Change from one to two columns Data Sheet SS/261GR/AR-EN Rev. 07 Model 261GR for gauge pressure Model 261AR for absolute pressure 2600T series pressu re transmitters Engineered solutions for all applications
More informationAT9000 Advanced Transmitter Differential Pressure Transmitters
No. SS2-GTX00D-0500 AT9000 Advanced Transmitter Differential Pressure Transmitters OVERVIEW AT9000 Advanced Transmitter is a microprocessor-based smart transmitter that features high performance and excellent
More informationGeneral Specifications
General Specifications YVP110 Advanced Valve Positioner GS 21B04C01-01E FEATURES Model YVP110 FOUNDATION fieldbus TM Valve Positioner accepts digital communication to control a pneumatic actuator mounted
More informationTwo-Wire In Situ Oxygen Analyzer (550 to 1400 C)
Product Data Sheet PDS 106-581.A01 March, 2004 Model 5081FG Two-Wire In Situ Oxygen Analyzer (550 to 1400 C) Intrinsically safe: - CENELEC EEx ia IIC - Class I Div. I Gr. B, C, D (pending) Operates at
More informationDimensions. Technical Data General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm
Dimensions 65 9 5 14 40 35 11 9 5.4 M20 x 1.5 0102 S Model Number Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection Fixed setting Satisfies
More informationDifferential Pressure Transmitters
No. SS2-GTX00D-0500 (Rev.3) AT9000 Advanced Transmitter Differential Pressure Transmitters OVERVIEW AT9000 Advanced Transmitter is a microprocessor-based smart transmitter that features high performance
More informationSERVOTOUGH Oxy (1900)
PROCESS ANALYSERS SERVOTOUGH (1900) The SERVOTOUGH offers reliability, flexibility, simplicity of use and installation for applications in the most hazardous and challenging of environments. The worlds
More informationPT-400 User Manual APG
PT-400 User Manual APG R Doc #9002825 Rev C, 09/14 Table of Contents Introduction... iii Warranty and Warranty Restrictions... iv Chapter 1: Specifications and Options... 1 Dimensions...1 Specifications...
More informationPressure Measurement Transmitters for applications with advanced requirements (Advanced)
Siemens AG 206 Technical specifications SITRANS P DS III series for absolute pressure (from the gauge pressure series) Input Measured variable Absolute pressure Span (fully adjustable) or measuring range,
More informationDifferential Pressure Transmitters
No. SS2-GTX00D-00 AT9000 Advanced Transmitter Differential Pressure Transmitters OVERVIEW AT9000 Advanced Transmitter is a microprocessor-based smart transmitter that features high performance and excellent
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationHAZARDOUS AREA DIFFERENTIAL CLOGGING INDICATOR DEH SERIES
HAZARDOUS AREA DIFFERENTIAL CLOGGING INDICATOR PASSION TO PERFORM Filter elements are efficient only if their dirt holding capacity is fully exploited. This is achieved by using filter housings equipped
More information1 Technical specifications
Siemens AG 07 Technical specifications SITRANS P, DS III series for gauge pressure Input Measured variable Gauge pressure Span (fully adjustable) or measuring range, max. operating HART pressure (in accordance
More informationPROCESS ANALYSERS. SERVOTOUGH OxyExact (2223) Oxygen Transmitter. Installation Manual. Revision:
PROCESS ANALYSERS SERVOTOUGH OxyExact (2223) Oxygen Transmitter Installation Manual Part Number: Revision: Language: 02223/005A 10 UK English This page intentionally blank TABLE OF CONTENTS SERVOTOUGH
More informationElectro-Pneumatic Converter YT-940 SERIES
Electro-Pneumatic Converter YT-940 SERIES PRODUCT MANUAL VERSION 1.00 Contents 1. Introduction 3 1.1 General information for the users. 3 1.2 Manufacturer Warranty 3 1.3 Explosion Proof Warning. 4 2. Product
More informationSeries INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN
INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries Series 2000 ALL STAINLESS DESIGN EASY CALIBRATION WITHOUT TEST PRESSURE BY 3 PUSH BUTTONS ACCURACY 0,1% 4-20 ma AND HART PROTOCOL ATEX II
More informationRosemount 2120 Full-featured Vibrating Fork Liquid Level Switch. Quick Start Guide , Rev BA August 2012
Rosemount 220 Full-featured Vibrating Fork Liquid Level Switch Quick Start Guide 00825-000-40, Rev BA August 202 Quick Start Guide August 202 NOTICE This installation guide provides basic guidelines for
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20
More informationA Higher Level of Performance. Data Sheet. Series Pressure and Level Transmitters. For more information, please visit >
A Higher Level of Performance Data Sheet Pressure and Level Transmitters For more information, please visit > www.hawkmeasure.com Description Intelligent pressure and level transmitters for all industries
More informationPressure Measurement Transmitters for applications with advanced requirements (Advanced)
Siemens AG 207 Technical specifications SITRANS P DS III series for absolute pressure (from the gauge pressure series) Input Measured variable Absolute pressure Span (fully adjustable) or measuring range,
More informationI/P Transducer Positioner Module
I/P Transducer Positioner Module VRC P/N: 7958032 Installation, Operation and Maintenance Instructions 2.09 [53.1] 1.30 [32.9] 2.97 [75.5] 0.78 [19.8] 0.18 [4.4] 1.42 [36.1] n.18 MOUNTING HOLES (2) PLACES
More information4 qwer 2/2 3/2 4/2. Intrinsically Safe. Air and Inert Gas Intrinsically Safe Valves Brass, or Stainless Steel Bodies 1/4" to 1" NPT SERIES.
qwer Air and Inert Gas Valves Brass, or Stainless Steel Bodies 1/" to 1" NPT Features Designed solely for installation in intrinsically safe areas, with properly approved and sized current and voltage-limiting
More informationDimensions. Technical Data General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm
Dimensions 7 36 5 33.5 9 5.4 30 65 0102 Model Number Features Direct mounting on standard actuators Fixed setting Satisfies machinery directive Compact and stable housing EC-Type Examination Certificate
More information1 Overview. Pressure Measurement Transmitters for basic requirements. 1/16 Siemens FI SITRANS P220 for gauge pressure
Siemens AG 204 Overview The pressure transmitter SITRANS P220 measures the gauge pressure of liquids, gases and vapors. Stainless steel measuring cell, fully welded Measuring ranges 2.5 to 600 bar (36.3
More informationOrifice Plate Flow Meter
Orifice Plate Flow Meter FOFT Measuring Principle The principle of measuring the differential pressure is based on the fact that a differential pressure is created across that section of a pipe where its
More informationInstallation and Operation Manual
Installation and Operation Manual WIKA FLR-SBDF / BLR-SBDF Magnetic Level Transmitter (Please retain for future usage) Contact: Gayesco-WIKA USA, L.P. 229 Beltway Green Boulevard Pasadena, TX 77503 www.wika.com
More informationATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified
Intrinsically safe pressure transmitters ATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified CUSTOMER BENEFITS Certificate: ATEX & IECEx Fast customization thanks to configurable
More informationOSAT Series. Intrinsically Safe Infrared Temperature Sensor Operator's Guide
OSAT Series Intrinsically Safe Infrared Temperature Sensor Operator's Guide Issue L Jan 2017 Introduction OSAT Series intrinsically safe non-contact infrared temperature sensors measure the temperature
More informationFisher FIELDVUE DVC6000 Digital Valve Controllers
DVC6000 Digital Valve Controller Product Bulletin Fisher FIELDVUE DVC6000 Digital Valve Controllers FIELDVUE DVC6000 digital valve controllers are communicating, microprocessor-based current-to-pneumatic
More informationMicro Motion 3098 Gas Specific Gravity Meter
Product Data Sheet PS-001188, Rev. B April 2009 Micro Motion 3098 Gas Specific Gravity Meter Micro Motion density and concentration meters are built to tackle the most demanding process and fiscal applications.
More informationVortex flow sensor VA Di Ex-d with integrated, configurable transducer UVA in a flameproof enclosure for applications in explosive atmospheres
Vortex flow sensor VA Di Ex-d with integrated, configurable transducer UVA in a flameproof enclosure for applications in explosive atmospheres Drawing 1 VA Di ZG1 Ex-d Measured variables actual flow rate
More informationType N-10, N-11 Hazardous Area Non-incendive Transmitters
Electronic Pressure Catalog > Hazardous Area > N-10, N-11 Type N-10, N-11 Hazardous Area Non-incendive Transmitters Applications Natural gas compressors Wellhead monitoring Pipeline pressure General industrial
More informationLMP 307. Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % / 0.
LMP 07 Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % / 0. % FSO Nominal pressure from 0... mho up to 0... 50 mho Output signals -wire: 4... 0 ma -wire: 0...
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. An electric standardized signal of 4 to 20 ma or
More informationAMT-Ex Dewpoint Transmitter
AMT-Ex Dewpoint Transmitter Instruction Manual Alpha Moisture Systems Alpha House 96 City Road Bradford BD8 8ES England Tel: +44 1274 733100 Fax: +44 1274 733200 email: mail@amsytems.co.uk web: www.amsystems.co.uk
More informationAnnex 01 to Certificate IECEx LCI X issue 10
2017-07-29 issue 10 FULL EQUIPMENT DESCRIPTION Application f zone 1: The controller compartment PGC5000A (which controls from one to four Isothermal Ovens type PGC5000B PGC5000C) houses a power supply
More informationReed sensor for bypass level indicators, model BT
Operating Instructions Reed sensor for bypass level indicators, model BT EN Reed Sensor for bypass level indicators model BT Aluminium housing, bottom mounted 1208872/ 31.07.2018 EN EN Reed sensor for
More informationDimensions. Technical Data General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm
Dimensions 65 9 5 40 35 14 11 9 5.4 M20 x 1.5 0102 Model Number Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection Fixed setting Satisfies machinery
More informationINDUSTRIAL. Pressure Transmitters. Product Guide. Low cost to high accuracy portfolio. Ranges from 70 mbar to 1400 bar. Flexible, rugged and reliable
INDUSTRIAL Pressure Transmitters Product Guide Low cost to high accuracy portfolio Ranges from 70 mbar to 1400 bar Flexible, rugged and reliable Fixed and rangeable 4-20mA outputs Electrical/pressure connection
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. Endura AZ30 Combustion oxygen monitor
ABB MEASUREMENT & ANALYTICS DATA SHEET Endura AZ3 Combustion oxygen monitor E N D U R A AZ 3 COMBUST I ON OX YGE N MONITOR DS/AZ3 -E N RE V. E Measurement made easy Proven technology for use in hazardous
More informationL3 Pressure and Level transmitter
SENSORS FOR AND BIOPHARMA. Product Information L3 L3 Pressure and Level transmitter Range of applications Hydrostatic Level measurement in dynamic temperature environments Pressure measurement in pipes
More informationA Unified Marking System for Ex Equipment
CERTEX Appointed Ex Laboratory Reg No: 1999/027771/07 (Pty) Ltd Government Approved Inspection Authority T0104 PO Box 467 Tel: +27 (11) 316 4601 Olifantsfontein Fax: +27 (11) 316 5670 1665 E- mail: info@explolabs.co.za
More informationMTB Load Cell. Globally Approved for Accuracy and Safety. MTB Load Cell Fully Approved
MTB Load Cell Process Weighing Due to the hermetically sealed design, MTB is ideal for harsh environments in process or food applications. The full set of approvals makes it the right choice for your application.
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx CML 14.0034X Issue No:
More informationPressure & Temperature Switches
Pressure & Temperature Switches The User Friendly Generation General Bulletin TEMPERATURE SWITCHES BETA TEMPERATURE SWITCH The BETA Temperature Switch is a pressure switch incorporating a sealed 2-phase
More information