Network Rail Ancillaries PPE Catalogue

Transcription

1 ISSUE 04: September 2016 Network Rail Ancillaries PPE Catalogue brought to you by

2 Welcome to the Network Rail Ancillaries Protective Clothing Catalogue This is the Network Rail catalogue for PPE ancillaries, which displays the range of products available on iproc. This catalogue offers a broad range of products that have been selected by the workforce safety committee for their high quality, fitness for purpose, suitability and comfort to enable you to have the equipment needed to do your job. PPE is the last line of defence which may not always prevent an injury, but when worn correctly and maintained will minimise the severity. Network Rail also continuously works to eliminate hazards and reduce the likelihood of any occurrences so everyone goes home safe everyday. All of the items in this catalogue are supplied by Bunzl Greenhams and are available to order via iproc, the Network Rail online ordering system. Once the order has been placed, if any support is required to check on progress or resolve any issues, this is provided by the Network Rail help desk who can be contacted via these methods. For more information please contact: Phone PPEcustomerservice@networkrail.co.uk

3 Contents Personal Protective Equipment Special Hazard Workwear 4-5 Workwear 6 Hand Protection 7-14 Safety Footwear Respiratory Protection Eye & Face Protection Head Protection Hearing Protection Fall Arrest 33 Contractors Site Equipment Site Equipment 34-36

4 Special Hazard Workwear 3M 4515 Disposable Coverall Protects skin from hazardous dusts and limited liquid splashes Elasticated hood, ankles, cuffs and waist 2-way zip with storm flap Breathable fabric with low lint Colour: Hi Viz Orange Size: M-2XL Code: Kleenguard A10 Blue Hooded Coverall Colour: Navy Blue Size: S- 3XL Code: KeepCLEAN Disposable Hooded Coverall Light protection from dirt and grease Made from 100% polypropylene with zip front Elasticated hood and cuffs Colour: White Size: M-3XL Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

5 Special Hazard Workwear Special Hazard Workwear Kleenguard A20+ Type 5/6 Breathable Hooded Coveralls CONFORMS TO EN 340 COMPLEX DESIGN TYPE 5 & 6 AND EN Breathable particle protection coverall Protection against particles, fibres and chemical splash Durable SMS fabric keeps out 99% of particles larger than 1 micron (I>O.M Aloxite test) Triple stitched internal seams protect against tearing. Breathable fabric reduces the risk of heat stress Specially designed body, hood and waist for comfort and safety Silicone free for critical areas EN approved for radioactive dust protection 97100/10/20/30/40/50 Colour: White Size: S, M, L, XL. XXL, XXXL Code: Kleenguard A40 Type 5/6 Hooded Coveralls Ultra strong fabric and strong triple stitched seams help protect against tearing Anti-static fabric EN helps reduce the risk of sparking which could cause danger Colour coded badge, easily identified protection Process protection for critical areas Ultra low-lint performance, film laminate and internal seams significantly reduce levels of lint Silicone free, ideal for paint-spraying Generous cut to the arms and legs for freedom of movement Elasticated cuffs, ankles and waist improves garment fit and worker safety Full length zip, eases ability to get in/out of garment Hood designed for mask use and freedom of movement 9790/1/2/3/4/5 Colour: White Size: S, M, L, XL, XXL, XXXL Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

6 Workwear Sioen Chemflex Apron % polyester knitting with PVC/PU coating 390gm2 Size: 75 x 100cm Colour: Green Code: Shin Guards Designed for protection when using a trimmer or brushcutter Polyethylene outer shell covers entire lower leg Soft, cushion inside molds to shape of leg Lightweight and comfortable to wear Quick and easy to put on and off with quick release adjustable buckle straps Size: 75 x 100cm Colour: Black Code: Impacto Rubber Knee Pad Anti-slip ribbed surface Easy on/ off replaceable and adjustable 1 rubber straps fasten to plastic buttons Great for heavy duty industrial and construction applications Heavy duty Code: Welders Leather Gaiter Spat Durable 80% polyester, 20% cotton with twill finish Genuine Teflon coating repels dirt, grease & water Twin needle stitching & bar tacked at stress points Double press stud & single button fastening with zip fly Knee pad pockets (knee pads not included) Elasticated waistband Size: Colour: High Visibility Orange Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

7 Safety Footwear Hand Protection Health & Safety Hands at work are extremely vulnerable to a wide range of hazards which include cuts, blows, chemical attack and temperature extremes. With industry s increasingly complex and sensitive manufacturing and handling processes, there is a growing insistence on the use of job fitted gloves that meet each user s specific requirements; hence our offering of a wider and more comprehensive range of gloves in this section in excess of 200 different types and styles from which to choose. Maintenance Contaminated and worn gloves may fail to protect the hands from the very hazard they were designed for. Effective protection is maintained by regular replacement of the gloves. Check the condition of the gloves, inside and out. Buying Guide European Standards Implies that the gloves comply with the basic requirements laid down by the EEC directive: Personal Protective Equipment. Simple Design (Category 1) For areas of minimal risk where the effects of not wearing a glove are easily reversible or superficial. Such products are self-certified. Intermediate Design (Category 2) For areas of specific risk i.e. mechanical risks. Such products will have been EC type tested against European test methods and certified by a notified body. Complex Design (Category 3) For areas/applications that can seriously or irreversibly harm the health. Such products, in addition to the CE type test, will also have to be either produced under an approved quality system OR be type tested on an annual basis. EN 388 This standard applies to all kinds of protective gloves giving protection from mechanical risks, in respect of physical problems caused by abrasion, blade cut, puncture or tearing. This standard also covers risk of electrostatic discharge. EN 374 This standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms. EN 511 This standard applies to gloves which protect the hands against convective and contact cold. EN 407 This standard specifies thermal performance for protective gloves against heat and/or fire. EN 659 This standard defines performance requirements for gloves designed to protect fire fighters against heat and flames. EN 421 This standard lays down test methods and performance criteria for gloves offering protection against ionising radiation and radioactive contamination. EN 455 Medical gloves for single use If a glove is to be used for food handling, it is required to carry either the words for food use or this symbol. Contact Heat A sample is taken from the palm area of a glove. The outside of the glove is put on a hot surface and the temperature of the inside of the glove is then monitored. The temperature on the inside of the glove must take 15 seconds or more to rise by 10 C from room temperature. EN 407 Performance Level Mechanical Hazards: EN 388 Performance Level (a) Abrasion resistance 0-4 (b) Blade-cut resistance 0-5 (c) Tear resistance 0-4 (d) Puncture resistance 0-4 EN 511: Cold Performance Level (a) Convective cold 0-4 (b) Contact cold 0-4 (c) Water proofness 0-1 Thermal Hazards: EN 407 Performance Level (a) Burning behaviour 0-4 (b) Contact heat 0-4 (c) Convective heat 0-4 (d) Radiant heat 0-4 (e) Small splashes of molten metal 0-4 (f) Large splashes of molten metal 0-4 Contact Temperature C > > > >15 Threshold Time Seconds

8 Hand Protection Glove Chainsaw Dynamic Cut Protection Stihl CONFORMS TO EN F Individual lens angle adjustment Non-slip rubber arm grips Scratch-resistant lens Colour: Clear lens, blue frame Code: Oregon Chainsaw Protective Glove CONFORMS TO EN Yellow hide palm with red nylon water repellent back and knitted cuff Colour: S, M, L, XL Code: KeepSAFE Nitrile Foam Coated Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 4121 Nitrile foam palm coating on a seamless nylon liner offering with exceptional dexterity and sensitivity Excellent grip in wet, oily or dry conditions Colour: Grey Size: 8, 9,10 Code: KeepSAFE Grip Latex Coated Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 2242 Latex dipped cotton knitted gloves ideal for most sure handling tasks Colour: Green Size: 8, 9, 10, 11 Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

9 Hand Protection Hand Protection 2242 KeepSAFE Grip Latex Coated Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 2242 Latex dipped cotton knitted gloves ideal for most sure handling tasks Size: 8, 9, 10, 11 Colour: Yellow Code: Honeywell Work Easy PU Coated Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 3121 Polyester with a polyurethane coating provide excellent abrasion, tear resistance and good grip Tight knit gives perfect support, limits the penetration of dirt and offers a good touch Ventilated back & PU coating optimise breathability Size: 8, 9, 10 Colour: Black Code: X1X 511 Honeywell Deerfit Thermal Glove CONFORMS TO EN 388 AND EN 511 INTERMEDI- ATE DESIGN EN388 TEST RESULT: 2X1X Water-repellent suede grain leather glove sewn on thumb Thinsulate liner offers protection against cold temperatures Ideal for fork-lift operators and handling cold wet materials Size: 7, 8, 9, 10, 11 Colour: Yellow Code: Turtle Skin Workwear Plus Puncture Resistant Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 3243 Ultra-comfortable leather work gloves specifically designed for tasks that require great grip, flexibility, and tactile sensitivity Patented blended aramid liner for added puncture protection in the palm area. Size: S, M, L, XL, XXL Colour: Black Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

10 Hand Protection Hand Protection Welders Gauntlet X4X Fully socked lined, self hemmed cuff, black welted Colour: Red Size: Mens Code: KeepCLEAN Canadian Rigger Style Furniture Hide Glove Furniture cow hide glove supplied in colours as available Safety cuff with vein protection patch Normally supplied with palm patch Elasticated back Size: Men s Code: KeepCLEAN Canadian Rigger Style Pig Split Leather Glove Pig leather Safety cuff with vein protection patch Elasticated back Palm lined Size: Men s Colour: Yellow Code: KeepSAFE Canadian Rigger Style Power Chrome Leather Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 4143 High quality Grey chrome leather Rubberised cuff with vein protection patch Elasticated back Palm lined Colour: Grey Size: 10 Code: KeepSAFE Chrome Leather Red KeepSAFE Gold Canadian Cotton Back Rigger Glove Rigger Style Chrome Leather CONFORMS TO EN 388 INTERMEDIATE Glove DESIGN EN388 TEST RESULT: 4143 CONFORMS TO EN 388 INTERMEDIATE Premier quality chrome split leather DESIGN EN388 TEST RESULT: 3133 Cotton back High quality, shoulder chrome leather Knuckle and fingertip protection Elasticated back and lined palm Rubberised safety cuff Size: 10 Palm lined Code: Colour: Red Size: 10 Code: KeepSAFE Fit and Grip Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 114X High grip PVC lattice finish on a knitted base providing high levels of dexterity and grip Colour: Orange Size: 10 Code: KeepCLEAN Cotton Stockinette Glove Standard quality knit wrist Size: Men s Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

11 Hand Protection KeepCLEAN Cotton Stockinette Glove Standard quality open cuff Size: Men s Code: Polyco Saturn Hi Vis Insulated Glove CONFORMS TO EN F High Visibility vinyl coating on an insulated liner is resistant to grease, oil, dirt and grime Keeps hands warm and dry with extra long knit wrist for comfort Colour: Saturn Yellow Size: 10 Code: KeepSAFE Long Nitrile Glove CONFORMS TO EN 388 AND EN 374 COMPLEX DESIGN EN388 TEST RESULT: mm long with patterned grip and flock lining Offers dexterity and good abrasion resistance Resistant to animal fats, solvents and alkalis Colour: Green Size: M, L, XL (8, 9, 10) Code: Marigold Industrial Heavyweight Natural Rubber Gloves CONFORMS TO EN 388 AND EN 374 COMPLEX DESIGN EN388 TEST RESULT: 4121 Unlined black natural rubber glove with high resistance to water based chemicals Ideal for use where heavy duty chemical protection is essential e.g. sandblasting, sanitation, chemical handling Size: M, L, XL (8.5, 9.5, 10.5) Colour: Black Code: Polyco Nitri-Tech II Protective Glove CONFORMS TO EN 388 AND EN 374 COMPLEX DESIGN EN388 TEST RESULT: 4101 Flock lined offering good abrasion resistance as well as protection against a wide range of chemicals including strong detergents, oils and certain solvents Versatile and approved for use in the food industry as well as having anti-static properties to EN 1149 part 1: /5/6/7 Size: 7, 8, 9, 10 Colour: Blue Code: Keepsafe Cut Resistant Level 5 Nitrile Coated Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 4542 Seamless high cut resistant (level 5) Glass Fibre/ Spandex/Synthetic mix yarn Nitrile coating on palm & fingers for increased resistance to oils & greases Soft finish provides exceptional cool comfort Size: 8, 9, 10 Colour: Grey/Black Code: KeepSAFE Nitrile Glove CONFORMS TO EN 388 AND EN 374 COMPLEX DESIGN EN388 TEST RESULT: 4002 Size: M, L, XL, XXL, XXXL Colour: Green Code: KeepSAFE Heavyweight Rubber Glove CONFORMS TO EN 388 AND EN 374 COMPLEX DESIGN EN388 TEST RESULT: 3121 Heavyweight rubber with flock lining and patterned grip Good resistance to knocks and abrasion make this an ideal glove for a variety of uses Food safe Size: S, M, L, XL Colour: Black Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

12 Hand Protection Polyco Leather Electricians Polyco Electricians Gloves Overgloves Class 0 CONFORMS TO EN 388 INTERMEDIATE CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 3121 DESIGN EN388 TEST RESULT: 3121 For use with electricians gloves RE0360/08/09,10/11 Working voltage Size: 7, 8, 9, volts AC Code: Tested to 5000v AC Colour: Yellow Size: 8, 9, 10, 11 Code: Clean Grip Disposable Nitrile Powder-Free Gloves CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: % nitrile approved for use with food preparation AQL 4.O Colour: Blue Size: S, M, L, XL Code: Box of Ansell Hyflex PU Coated Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: An ultra-lightweight glove maximising touch and precision 20% lighter in weight than previous nylon/ polyurethane Ansell gloves for exceptional tactility Designed for assembly tasks requiring a high degree of precision, repeated flexing and pinching of the fingers and fingertips Colour: Blue/Black Size: 6, 7, 8, 9, 10, 11 Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

13 Hand Protection JUBA Grip Latex Coated Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: G Seamless design ensures good ergonomy Great dry and wet grip Not suitable to be used in oily surfaces or environments Excellent abrasion and superficial cut protection Colour: Yellow/Green Size: 8, 9, 10 Code: Knitted Kevlar Glove With Leather Palm Touchstone Ultra N Qualitative RPE Face Fit Test Kit for FFP1, FFP2, FFP3 filtering facepieces and half facemask respirators fitted with particulate or combined filters Colour: Yellow/Green Size: 8, 9, 10 Code: Clean Grip Disposable Latex Powder-Free Gloves 100% latex powder free approved for use with food preparation Colour: Natural Size: S, M, L, XL Code: Box of KeepSAFE Pick and Go Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 2031 Knitted polyester glove with blue PVC dots on palm and fingers Ideal for sorting operations and parts handling Size: S, M, L, XL Colour: White with Blue dots Code: KeepSAFE PVC Lightweight Glove CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 4121 Fully coated knitwrist Smooth finish For general handling Flexible, good sensitivity, comfortable in use Good dry grip Size: 8, 9, 10 Colour: Red Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

14 Gloves Size Guide Glove Sizing If gloves are uncomfortable, they won t get worn. Ensure you have the right glove fit by using our handy size guide below. What size glove are you? Place your hand on top of the silhouette to see what size glove you will need. Getting the right size is key for working safely and needs to be a comfortable fit. The sizing system for gloves works based on the size of your palm span as shown below. X-Small (6) Small (7) Medium (8) Large (9) X-Large (10) XX-Large (11) XXX-Large (12) Your hand here Different manufacturers communicate their sizing in either letters (L, XL, XXL) or numbers (6, 7, 8, 9) so understanding how these sizes relate to each other is key to getting the correct glove for you. See the table below to see how they compare. Gloves Sizing Comparisons Letter Sizes XS S M L XL XXL XXXL Number Sizes Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

15 Hand Protection Safety Footwear Health & Safety Legislation EN ISO 20345:2011 is the current standard to which new and recently certified footwear has to conform (whilst stock rotates some safety footwear may have been tested to the previous standard). The standard to which the footwear conforms will be identified on the product information label within the footwear. The standard requires the inclusion of a 200 joule toecap for impact protection. In addition to the over arching requirements of the standards there are a number of progressive ratings which assist selection of footwear appropriate for varying workplace hazards, these are: SB safety basic footwear meeting all the minimum requirements of the standard S1 additionally featuring anti-static properties and fully enclosed and energy absorbing heel unit S2 additionally featuring the use of water resistant leather S3 additionally featuring cleated outsole and pierce resistant midsole S4 rubber or polymeric waterproof footwear with 200 joule toecap, anti-static properties and energy absorbing heel unit S5 additionally featuring cleated outsole and pierce resistant midsole Additional protective features can be built into the footwear and are identified by the following suffixes: P protection from upward penetration provided by a composite or steel midsole (not used in conjunction with S3 or S5) M metatarsal impact protection C conductive properties helping to prevent the build-up of static (but no protection against electric shock) A anti-static properties to prevent the build-up of static and give limited protection against electric shock from nominal mains voltage HI insulation against heat CI insulation against cold E energy absorption in heel unit WRU water resistant uppers HRO resistance to hot contact up to 300 C Buying Guide Choose the right footwear Most workplaces have varying requirements for the provision of safety footwear, which is why we offer a comprehensive range within which you should be able to identify appropriate footwear to meet the needs of your workforce whatever the hazards identified in your risk assessment. Whilst protection is paramount it is recognised that with long wear periods, often in hostile conditions, wearer acceptance, design, brand and comfort are additional considerations. We therefore offer varying styles from executive shoes to heavy duty rigger boots, and leading brands such as CAT, Timberland, Dr Martens, RockFall, U-Power, Goliath & Dunlop alongside our increasingly popular and cost effective Tuf Revolution and Tuf ranges. Slip Resistance Slips, trips and falls are an ever present hazard within most workplaces and safety footwear can play it s part in preventing injury, particularly from slips, by featuring slip resistant soles. For many years the test of choice for slip resistance has been SATRA s TM144 standard which evaluates the performance of the sole unit on a water wet quarry tile. Well established styles of footwear are likely to have been tested to TM144 and will be identified as such by the TM144 icon. However with regard to new styles or footwear undergoing periodic re-testing the recently established EN ISO with it s progressive SRA, SRB and SRC ratings has become more widely used. Details of the EN ISO testing requirements are shown in the table below: Marking SRA Slip resistance ratings for industrial PPE footwear in Europe Footwear slip resistant on Ceramic tile with 0.5% SLS solution Marking symbols and specifications Minimum coefficient of friction by ISO 13287:2006 Forward heel slip Forward flat slip SRB Steel with 90% glycerine Both the above on respective SRC Both the above surfaces NB: ISO 13287:2006 is identical to EN ISO 13287:2007 Both the above on respective surfaces Footwear tested to EN ISO and the rating achieved will be identified by the appropriate SRA/SRB/SRC icon. Sizing Safety footwear often carries European sizing, please see below for a comparison table. Shoe Size Conversion Table This table is for guidance only as sizes are not standardised British Continental Maintenance As with all footwear it is essential that, to achieve optimum performance of the properties built in to the safety footwear at time of manufacture, safety footwear is cleaned and maintained regularly. Safety Icons Key TOECAP MIDSOLE WATER RESISTANT LADIES SIZES ANTISTATIC Denotes footwear with safety toecap Denotes footwear with safety midsole Denotes water repellent footwear Denotes footwear suitable for women Denotes footwear with anti-static soles WATER PROOF TM144 SRB SRA SRC Denotes waterproof footwear Denotes TM144 rating Denotes SRB rating Denotes SRA rating Denotes SRC rating

16 Safety Footwear Safety Footwear TOECAP B? W S5 TOECAP Goliath Poseidon GORE-TEX Leather Firefighter Safety Boot CONFORMS TO EN 20345: JOULES S3 Full grain leather upper with padded collar Contoured triple layer footbed Non woven top layer made of 100% polymide fibres and is highly abrasion resistant both wet and dry Mid layer is black PU air permeable foam with open cell construction It is of high density for good cushioning support The bottom layer includes 30% viscose giving extra moisture absorption and desorption properties Antibacterial, removable and washable at 30 C Stainless steel pierce resistant midsole Size: 4-13 (Full sizes only) Colour: Black Code: MIDSOLE SRC ANTISTATIC WATER RESISTANT Tuf Safety Wellington Boot with Midsole CONFORMS TO EN 20345: JOULES S5 PVC with PVC/nitrile sole Ribbed heel with kick off tab to assist removal Oil, acid, alkali and fat resistant Pierce resistant steel midsole Size: 3-13 Full sizes only) Colour: Black with Black sole Code: MIDSOLE SRC LADIES SIZES WATER PROOF Uvex Hydroflex Inlay Soles CONFORMS TO EN 20345: JOULES S3 Breathable natural cork footbed Active coal stops foot odour Antistatic Uvex hydroflex GEL for optimal shock absorption in heel area Wffective ventilation system Comfortable underfoot Size: 3-13 (Full sizes only) Code: Endurance Thermal Seaboot Stockings 55cm (22 ) seaboot hose, containing 50% thermal fibre and 50% wool Ultra warm Colour: White Code: Bama Thermal Insole Size: 4-12 (Full sizes only) Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

17 Safety Footwear Respiratory Protection Health & Safety Legislation Update Amended Standard En 149:2001+A1:2009 EN 149:2001 was superseded by an amended version, EN 149:2001+A1:2009 (EN 149+A1) in July Changes included the introduction of two usability classifications for disposable respirators; single shift only devices non-reusable (shown through marking NR ) and reusable devices (marked R ). The amended European Standard EN 149:2001+A1:2009 states that all reusable devices (marked R ) must withstand being cleaned and disinfected using a method provided by the manufacturer. This change, along with new performance requirements, is intended to give the user further confidence in respirators providing continuous respiratory protection in hazardous environments. All particle filtering half masks featured fully conform to EN 149:2001+A1:2009. Disposable respirators that have passed the optional Dolomite clogging test have a suffix D listed in their conformity standards. Buying guide Selecting the correct protection Respiratory Hazards The selection of Respiratory Protection follows a basic four-step method: Identify the hazards dust, metal fume, gas, vapour Assess the hazards assess the hazard level/other protection skin and eye Select the proper respirator disposable, half mask, full face, powered, airline Training in fitting and use to optimise respiratory protection METAL FUMES DUSTS GASES MISTS VAPOURS Did you know? Approximately 5.5million workers are exposed to respiratory hazards in the work place and research by both BSIF and HSE has highlighted concerns that RPE is not being effectively selected, used and maintained in a significant proportion of workplaces where a respiratory hazard exists, leaving workers at risk. Are you FULLY PROTECTED? Do you Use the right mask? Use the right filter? Replace filters when required? Store and clean it properly? Maintain the product properly? Fit it properly? Have you Been trained how to use it? Been Fit Tested by a competent person? If you answered NO to any of the above, your respirator WON T protect you! 17 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

18 Respiratory Protection KeepSAFE Elipse Half Mask with P3 Filters EN 388 AND EN 374 COMPLEX DESIGN EN388 TEST RESULT: 4121 Perfect for everyday use in construction and utilities through to the more demanding environments of metalworking, welding and stone masonry Twin filter ready to wear half mask Latex and silicone free Lightweight TPE face piece that is comfortable to wear for long periods of time Low profile filters provide unobstructed field of vision Suitable against silica dust Weighs less than 135g with filters Size: S/M, M/L Code: Elipse P3 Storage Case For use with KeepSAFE Elipse Half Mask Respirator Code: KeepSAFE Elipse P3 Construction Dust Replacement Filters For use with KeepSAFE Elipse Half Mask Respirator Pack of 2 Code: M Aura Flat-Fold Valved Dust/ Mist/Metal Fume Respirator CONFORMS TO EN 149:2001 FFP3 NR D Unique 3-panel design, soft cover web - for comfort and excellent fit 3M Cool Flow valve Individually packed, flat fold Assigned Protection Factor = 20 Code: Box of 10 Economy Disposable Valved Respirator FFP3 Protection against vinyl fire toxic Dusts, Fibre & Aqueous Mists protects against oil mists welding fumes (not nitrate gases) and microbiological hazards for use in Pharmaceutical iron & steel and construction industries Exhalation valve lessens heat build up and provides greater comfort Assigned Protection Factor = 10 Code: Box of 5 18 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

19 Respiratory Protection JSP FORCE8 Respirator With Ready Fitted Press-To-Check Construction Dust MASK CONFORMS TO EN140, FILTERS CONFORM TO EN143 Respirator Force 8 Half Mask includes With Press To Check P3 Construction Dust Filters Ready Fitted The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes The mask accepts the full range of low profile Force8 filters, offering the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours Code: M FT30 Face Fit Test Kit (Bitter) Qualitative RPE Face Fit Test Kit for FFP1, FFP2, FFP3 filtering facepieces and half facemask respirators fitted with particulate or combined filters Each kit contains a hood and collar assembly, two nebulisers, one bottle of sensitivity solution, one bottle of fit test solution, detailed user instructions and CD ROM, spare atomiser heads for the nebuliser and a pin for unblocking nebulisers Code: M Versaflo M-307 Headtop CONFORMS TO EN12941 TH3 (APF 40) WITH THE 3M VERSAFLO TR-300 AND TR2 (APF 20) WITH THE JUPITER TURBO UNITS EN B (APF40) WITH THE 3M AIRFED BELT UNIT For respiratory, eye, face and head protection Features a flame resistant faceseal for applications with hot particles Size: S/M, M/L Code: Welding Helmet Air Powered Speedglas for Adflo Respirator The 3M Speedglas 9100FX Series Welding Shield features a flip-up combination of an autodarkening welding shield and a protective visor Greater coverage of the ears, neck and sides of the head Great stability and balance of the shield as a result of its lower pivot point Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

20 Hand Protection Eye & Face Protection Buying Guide Anti-mist? Anti-scratch? Does your eyewear reach the standard? 2-3 U 1 FT K N CE 2-3 U 1 FT K N CE U EN166 FT CE K and N are coating treatments that reach the standard set by EN166. It s easy how to find out, you just look for the K (anti-scratch) and N (anti-mist) on the lens of your safety glasses, goggles and face shields. By EN law all safety eyewear needs to be marked on the lens. If the lens doesn t have K or N marked on, then they do not reach the required standard. K = Anti-scratch treatment applied to the surface of the lens whose hardness is a barrier against superficial damages that can impair vision. The coating is permanent and it offers performance to the standards required by EN166 N = Anti-mist treatment, which, due to its chemical and physical abilities, prevents the formation of condensation by absorbing the humidity drops. The coating is permanent and it offers performance to the standards required by EN166 Safety Icons Key We have developed a new range of safety icons and tables to help you compare and find the right eye protection. ANTI SCRATCH Anti Scratch ANTI MIST Anti Mist KANTI SCRATCH Anti Scratch K N ANTI MIST Anti Mist N IMPACT PROTECT Impact Protect European Standards EN 166 To assist you in your understanding of markings on Eye Protection Products covered by this Standard you should note: Optical Standard: Frame Lens Class 1: For continuous work - 1 Class 2: For intermittent work - 2 Class 3: For occasional work, but must not be worn continuously - 3 Mechanical Properties: Increased Robustness (General Purpose) - S High Energy Impact (190m/sec) A A Medium Energy Impact (120m/sec) Grade 1 B B Low Energy Impact (45m/sec) Grade 2 F F Increased Robustness General Purpose Impact-Performance at Extremes of Temperature T T Areas of Use: Liquids (chemical) 3 - Large Dust Particles 4 - Gas and Fine Dust Particles 5 - Short Circuit Electric Arc 8 - Molten Metals and Hot Solids 9 9 Optional: Resistance to Misting/Fogging - N Resistance to Mechanical Damage (Anti-Scratch) - K Ways to Order: Call the PPE Helpdesk (Details on Connect) NB: The A, B, F and S markings on frame and lens represent tests carried out on each component and therefore may be different in which case the lower level must be assigned to the complete unit when making an assessment. EN 169 EN 170 EN 171 EN 172 EN 175 EN 207 EN 208 Network Rail i.procurement Welding Filters Ultra-Violet Filters Infra-red Filters Solar Protection Filters for Industrial Use Welding Work Equipment Laser Protection Eyewear Laser Adjustment Eyewear

21 Eye & Face Protection ANTI SCRATCH IMPACT PROTECT Stealth 9000 Network Rail K&N Rated Safety Spectacles Lightweight safety spectacle, 25g Wraparound 9 base curve polycarbonate lens Co-injection moulded temples with soft rubber to increase grip and provide excellent comfort levels Optical Class 1 lens, blocks 99.9% of ultraviolet radiation UVA, UVB and UVC protection Conforms to EN166.1.F.N. Tested to resist the impact of a 6mm () steel ball fired at 100mph (160kph) at the lens Colour: Clear Lens Code: (A) Colour: Smoke Lens Code: (B) Colour: Amber Lens Code: (C) Colour: Indoor/Outdoor Lens Code: (D) C A B D 3M 2740 Safety Spectacles ANTI MIST ANTI SCRATCH CONFORMS TO EN FT AND EN 170 Combines a modern design with various adjustment options leading to increased protection and comfort Polycarbonate lens with scratch resistant and anti-mist coatings Adjustable temple length and adjustable lens angle Soft temple tips reduce pressure Colour: Clear anti-mist, anti-scratch lens, Blue arms Code: IMPACT PROTECT KeepSAFE Concorde Safety Spectacles CONFORMS TO EN F Ultra lightweight modern style with blue nylon adjustable length sidearms Polycarbonate single lens construction with built in browguard Colour: Clear lens, Blue sidearms Code: ANTI SCRATCH IMPACT PROTECT 21 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

22 Eye & Face Protection ANTI SCRATCH ANTI MIST Bolle Silium Safety Spectacles Clear Lens CONFORMS TO EN F AND EN 170 Sleek sports metal provides the wearer with optimal protection Panoramic vision with integrated side shields Self adjusting spring temples Soft adjustable nose pads and Bolle s Tip Grip system for improved fit Colour: Clear anti scratch/anti mist lens, Silver frame Code: IMPACT PROTECT ANTI SCRATCH ANTI MIST Bolle Silium Safety Spectacles Smoke Lens IMPACT PROTECT CONFORMS TO EN F AND EN 170 Sleek sports metal provides the wearer with optimal protection Panoramic vision with integrated side shields Self adjusting spring temples Soft adjustable nose pads and Bolle s Tip Grip system for improved fit Colour: Smoke anti scratch/anti mist lens, Silver frame Code: ANTI SCRATCH ANTI MIST IMPACT PROTECT Bolle Spider Safety Spectacles with ESP Lens CONFORMS TO EN F EN 170 AND EN 172 Trapezoid lens shape guarantees extra field of view Lightweight nylon frame with integrated side shields TPE inserts on both the bridge and temples provides exceptional levels of comfort and fit Supplied with a free micro fibre pouch Colour: ESP anti scratch lens, Bronze frame Code: ANTI MIST ANTI SCRATCH IMPACT PROTECT Bolle Silium + Safety Spectacles K & N Rated CONFORMS TO EN 166/EN 166/170/172 1FT KN Lightweight- 21g Flexible close-fitting sports wrap Non-slip sports temples Adjustable non-slip bridge Colour: Clear anti-scratch/ anti-mist lens Code: (CLEAR) (SMOKE) JSP EVOSPEC CONFORMS TO EN 166 Easy assembly kit for adding retractable eyeshields to an existing EVOLite helmet Colour: Clear Code: Colour: Smoke Code: KeepSAFE Polycarbonate Visor CONFORMS TO EN B.3.9 Size: 20cm (8 ) bound Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement 22

23 Special Eye & Face Hazard Protection Workwear ANTI MIST ANTI SCRATCH Bolle Atom Safety Goggles CONFORMS TO EN BT 3,4,5 Compact, lightweight and ultra comfortable TPR flexible frame clear anti-scratch and anti-mist lenses offer a Wide field of view Wide adjustable strap adds to the comfort Fits over prescription spectacles Prescription insert is also available Tear off lens protectors Colour: Clear anti-mist, anti-scratch lens, Blue frame Code: IMPACT PROTECT Bolle Atom Safety Google Visor CONFORMS TO EN 166 B When the optional face visor is fitted the Atom doubles up as a face shield Code: M Speedglas 9002D Auto Darkening Welding Filter CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 3121 Suitable for MMA and MIG welding (plus TIG welding down to 20 Amps) Shades 9 or 11 Light shade 3 Viewing area 44x92mm Two sensitivity options Code: M Speedglas SL Welding Sheild with Shade 8-12 Lens CONFORMS TO EN 388 INTERMEDIATE DESIGN EN388 TEST RESULT: 3121 The Speedglas SL welding shield is made from strong, lightweight material with excellent protection Unlike other materials that can absorb moisture and become heavy, the Speedglas SL shield is non-absorbent, so it retains its performance in high humidity Using new liquid crystal designs and manufacturing techniques, we are able to make the Speedglas SL auto darkening welding filter much lighter than other models but with the same outstanding optical quality and switching performance For most arc processes such as MMA, MIG/MAG, TIG and plasma welding Variable (8-12) dark shade 4 sensitivity settings Battery life: 1500 hours Weight: 360g Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

24 Eye & Face Protection Centurion Polycarbonate Faceshield Size: 150mm Code: Centurion S59 Forestry Mesh Visor Size: 150mm (6 ) Code: Bolle Rigid Spectacle case Large polyester spectacle case complete with belt loop for convenient storage Code: Bolle Microfibre Spectacle Case Manufactured in microfibe with drawstring closure Code: Spectacle Neck Cord Black lanyard spectacle cords Code: Pack of 6 24 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

25 Eye & Face Protection Head Protection Head Protection Buying Guide Identifying Hazards A safety helmet is required in almost every industry where there is a risk of being injured by falling objects. In areas of restricted head space where accidental bumping of the head could be involved (e.g. overhead piping) a scalp protector (bump cap) should be considered. Bump caps are not a substitute for safety helmets and must not be used to protect the head from falling objects. Shelf Life To comply with European Standards, all helmets are marked with the quarter or month and year of manufacture. If helmets are stored in boxes in which they were supplied and do not experience environmental extremes, the shelf life of a helmet is not limited. However, it is not recommended that a helmet should be in use five years after date of manufacture. Sweatband: A helmet can have either none, a standard or a high absorbent sweatband for improved comfort during use Ventilation: Some helmets are ventilated, providing cooling airflow during use Badging: Some helmet designs allow for a larger front badging area, for an enhanced corporate image Identifying Materials Shells are primarily made using UV stabilised high density polyethylene (HDPE) or ABS (Acrylonitrile Butadiene Styrene). Harnesses are made using low density polyethylene or textile webbing. Care and Maintenance A helmet may be cleaned with soap and water, drying with a soft cloth. A helmet should not be cleaned with abrasive substances or solvents and must not be stored in direct sunlight or in contact with chemicals. The wearer should inspect their helmet regularly. Any helmet showing more than superficial abrasions or scuffing to the shell should be replaced. So What Are The Differences? A helmet is not just a helmet. They have many different features providing specific user benefits, such as: Weight: Some helmets are lighter than others. A lightweight helmet may provide more comfort during prolonged periods of use Cradle: A helmet can have either a basic polyethylene cradle or a more comfortable textile webbing cradle Peaks: Peak lengths can vary a reduced peak is available for improved upward visibility Retro-Reflective Surfaces: Reflective surfaces that provide greater visibility of the wearer in low light conditions European Standards EN 397 specifies physical and performance requirements of industrial safety helmets. Certain tests are mandatory if the product is to receive EN 397 approval. These cover: Shock absorption Resistance to penetration Flame resistance Chin strap anchorage A manufacturer can choose to submit his products to additional optional tests. Such tests could lead to one or more of these markings appearing on a helmet. -20 /-30 C The helmet will provide some protection when worn in an environment at or above this temperature. -40 C ultra low temperature (outside of EN 397) 440V a.c. The helmet will protect against short-term, accidental contact with live electrical conductors up to this voltage LD The helmet will provide some resistance to lateral compressive (non-impact) loads MM Molten Metal splash test EN Builds on EN 397 to include more onerous tests and requirements, but also to include requirements for additional impact protection to the front, rear and sides of the head. It also includes performance tests for the retention system (typically headband and chin strap), not typically included in EN 397. EN Electrically insulating helmets for use on low voltage installations EN 812 Is the standard for Industrial Bump Caps, which are intended to provide protection against bumps caused by walking into hazardous projections. A Bump Cap does not provide protection against falling or thrown objects and should not be used where a safety helmet is required EN Helmet for Mountaineers 25 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

26 Head Protection JSP Surefit Polycarbonate Visor Offers protection against medium energy high-speed particles and liquid drops Size: 20cm (8 ) unbound Code: Mosquito Head Net Ultra fine mesh for high level protection 100% polyester fabric for a comfortable feel One size fits all so anybody can use it NATO approved No chemicals making it ideal for sensitive skin Code: Connect Polycarbonate Chinguard S91C Code: S54 Connect Face Screen Carrier Supplied complete with clips for attaching to the helmet Flip-up facility Accepts all Centurion Connect face screens Can be used in conjunction with Connect ear muffs Comes complete with Connect clip Code: JSP Surefit Wire Gauze Visor Forestry wire gauze Size: 20cm (8 ) Code: KeepSAFE Thruxton Visor Carrier Only Surefit visor carrier supplied without visor To fit JSP Mk7 and KeepSAFE safety helmets Code: JSP Surefit Visor Visor to fit JSP MKVII helmets Colour: Clear Code: Chamlon Sweat Band For EVO Range helmets Chamlon Egyptian cotton core with porous PU coating for maximum sweat absorption PH neutral, dermatologically tested Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

27 Head Protection Surefit Evo Visor Carrier To fit JSP EVO safety helmets Supplied without a visor Code: Evolite Helmet Clips Pack of 4 clips To securely attach head lamps and googles to an EVO2, EVO3, EVO6100 and EVOlite Safety Helmets Code: Pack of 4 Surefit Deluxe Chin Strap And Chin Cup To fit JSP helmets meeting the requirements of EN397 Releases automatically with forces between 150 and 250 Newtons Code: Surefit Elasticated Chinstrap Without Chin Cup To fit JSP and Keepsafe helmets meeting the requirements of EN397 Code: JSP Mk VII Safety Helmet With Lamp Bracket and Network Rail Logo Terylene webbing harness with fully absorbent leatherette comfort band Ventilated Easyjust harness adjustment system Fitted with international slots to add Surefit or other manufacturers helmet accessories WITHOUT RETROPEC Colour: White Code: Petzl Vetex Best Safety Helmet with Network Rail Logo Designed specifically for working at height Polycarbonate shell is resistant to wear and impacts Side slots allow for mounting eye/ear protection The adjustment wheel & cradle allow quick and easy fitting Strong chin strap reduces the risk of the helmet coming off during a fall Shell conforms to EN397 (Industrial safety helmet standard) Strap conforms to EN12492 (Mountaineering standard) Colour: Yellow Weight: 465g Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

28 Head Protection JSP Evolite Vented Safety Helmet With Network Rail Logos The low weight, and unique 3D Adjustment supreme comfort harness make this the most comfortable helmet on the market Performing above the EN397 standard thanks to its ABS lightweight shell Size: White Weight: 285g Code: JSP Evolite CR2 Reflective Safety Helmet The lightweight EVOLite CR2 features a Class R2 reflective sticker decal which meets the Class R2 reflective requirements of EN , over 50% more reflective than high visibility clothing reflective requirements EVOLite CR2 is the biggest step-up in night time visibility/reflectivity of head protection to date Colour: White Size: 53-64cm Code: JSP MK 7 Leatherette Spare Sweatband Surefit leatherette sweatband for JSP Mk7 safety helmets Code: S31N Connect Nylon Sweatband Brushed Nylon sweatband for improved comfort Code: Centurion Concept Linesman Helmet with Network Rail Logo Reduced peak helmet with four point security head harness with quick release buckle Ideal for working at heights (electrical/utilities) Colour: White Size: 51-63cm Code: Centurion S59 Forestry Mesh Visor Weight: 150mm (6 ) Code: Peltor G2031A Hard Hat System Complete system of safety helmet, face shield, Ear muffs and rain shield Ear muffs equipped with wide cushions provide reduced surface pressure and excellent seal against the head Colour: Orange Weight: 660g Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

29 Head Protection Railway Helmet Warmer High visibility Full head and face comforter Meets EN471 GO/RT 3279 requirements For JSP and Keepsafe helmets For use in rail industries Colour: High Visibility Orange Code: JSP Safety HardCap A1+ Reflective piping Ventilation holes in liner plus mesh panels Unique adjuster Sweat band Colour: High Visibility Orange Size: One Size Code: JSP EVOLite Standard Peak Vented Safety Helmet with Chinstrap and Network Rail Logo CONFORMS TO EN397 & EN KV 6-point terylene cradle harness system Egyptian cotton core with porous PU coating for maximum sweat absorption 3D Precision Fitting OneTouch Slip Ratchet Colour: White Code: JSP EVOLite Standard Peak Vented Safety Helmet with Chinstrap and Network Rail Logo CONFORMS TO EN397 & EN KV 6-point terylene cradle harness system Egyptian cotton core with porous PU coating for maximum sweat absorption 3D Precision Fitting OneTouch Slip Ratchet Colour: Blue Code: JSP EVOLite Reduced Peak Vented Safety Helmet with Chinstrap and Network Rail Logo CONFORMS TO EN397 & EN KV 6-point terylene cradle harness system Egyptian cotton core with porous PU coating for maximum sweat absorption 3D Precision Fitting OneTouch Slip Ratchet Colour: White Code: JSP EVOLite Reduced Peak Vented Safety Helmet with Chinstrap and Network Rail Logo CONFORMS TO EN397 & EN KV 6-point terylene cradle harness system Egyptian cotton core with porous PU coating for maximum sweat absorption 3D Precision Fitting OneTouch Slip Ratchet Colour: Blue Code: PVC Protective Neck Cape Provides splash protection from liquids When combined with visor and boilersuit gives full body protection Simple retrofit to helmet harness Colour: Green Code: Skull Cap Helmet with Breathable Liner Colour: Black Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

30 Hearing Eye Protection Hearing Protection Health & Safety The Law Employers are required to comply with the Control of Noise at Work Regulations 2005 which aim to ensure that employees hearing is protected from excessive noise at their place of work. The HSE guidance states that the hierarchy of control should begin with reducing noise through engineering means and other controls (e.g. segregation of activities). Where hazardous levels of noise remain present, Hearing Protective Equipment (HPE) may be used to further reduce exposure. Where average noise levels are 80 decibels (db) or above, an employer is required to assess the risk to employees, make hearing protection available and provide their employees with relevant information and training. 3M HPE which provides low attenuation is identified by green and yellow coloured symbols. At 85dB and above the provision of suitable HPE is mandatory. When HPE is worn, employees must not be exposed to noise above 87dB. 3M HPE which provides medium-high attenuation is identified by red symbols. For more information visit What to look for The attenuation table supplied with each hearing protector provides the assumed protection at different frequencies. They also feature H, M and L values which stand for High, Medium and Low and relate to how the equipment performs at high, medium and low frequencies. They will also have a Single Number Rating (SNR) which provides an indication of the performance averaged over the full frequency range. The attenuation of HPE selected must be high enough to reduce exposure to noise to acceptable levels but not so high that the wearer becomes isolated and unable to communicate or hear warnings. Rule of Thumb When it s necessary to raise your voice to have a conversation when 2m apart, the noise level is likely to be 85dB or above. SNR (Single Number Rating) SNR is the number of potential decibels the hearing protection will reduce the noise level by, if fitted correctly. The aim is to find a suitable product that brings noise level down to between 70 and 80 decibels. Over protection should also be avoided, as people may not be able to hear important every day sounds. SNR is only a general means of comparing different sound protection levels for different hearing protection. Target noise in the ear = 75dB to 80dB. Noise level = 100dB. SNR value of product = 25dB. In the ear noise = 75dB. Target met. 4 SNR 25 Buying Guide Identifying noise hazards and assessing noise levels in the workplace is the first step towards ensuring your workforce is protected. Noise Thermometer Sound Energy Doubles Every 3dB Apollo Lift-off 188dB db(a) 0 Pin falling on floor Threshold of hearing 30 Soft whisper Daily exposure causes slight hearing loss Hearing protectors suggested Daily exposure causes moderate to severe loss Hearing protectors required How the workplace can affect your hearing Conversation 60 Assess your needs The HSE website contains good information on assessing risk. See When a noise survey is required, it must be carried out by a competent person such as a noise consultant or specialist. In-house measurement may be undertaken by appropriately trained and experienced staff using a range of reliable sound level meters and associated software. 70 Lawnmowing Note that sound energy doubles every 3dB; For example, 30db has twice as much energy as 27dB. < 85dB(A) You do not have to wear hearing protection, but make it available to your workers. 83 db(a) - 93 db(a) You are above the permitted exposure level, hearing protection is compulsory above 85 db(a) db(a) - 98 db(a) You are above the permitted exposure level, hearing protection is compulsory. Ideal for high frequency noise Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement Riveting Jet take off Pain Threshold Brief exposure can cause permanent loss db(a) Short exposure causes moderate to severe loss Wear hearing protectors with extra care 94 db(a) db(a) You are above the permitted exposure level hearing protection is compulsory. Ideal for high and medium frequency noise. 95 db(a) db(a) You are above the permitted exposure level, hearing protection is compulsory. Ideal for all frequencies. 160dB 140dB 130dB 120dB 100dB 85dB 80dB 75dB Immediate physical damage Jet Engine Take-off 150dB Maximum allowable exposure Impact Drill 130dB Immediate pain threshold Oxygen Torch 121dB Short exposures at this level may cause hearing damage Impact Wrench 102dB Extremely loud Forklift 87dB Protection MUST BE PROVIDED above this level Hand Saw 85dB Protection recommended for 8-Hour exposures above this level Vacuum Cleaner 74dB Non-Hazardous 30

31 Hearing Protection KeepSAFE Blue Cyclone Ear Muff Good, effective protection across a wide range of noise frequencies with acoustic foam fill Suitable in manufacturing industries, agriculture, construction sites, food industry and engineering Size: Blue Weight: 300g Code: M Peltor Optime II H520B Neckband Ear Muff Features optimum attenuation also at lower frequencies Wide cushions provide optimum seal against the head Ideal for agricultural use, mining, construction equipment, heavy industry and airports Colour: Black Weight: 195g Code: M Peltor Optime III H540B Neckband Ear Muff Reduced peak helmet with four point security head harness with quick release buckle Ideal for working at heights (electrical/ utilities) Colour: Black/Red Size: 270g Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

32 Hearing Protection KeepSAFE Thruxton Ear Muff CONFORMS TO BSEN H= 31 M=23 L=16 SNR=26 To fit Keepsafe comfort plus & standard Mk2 helmets Using the CliptiteTM slot When not in use the arms allow the cups to stand off clearly from the head SNR 26 Code: Surefit Contour Ear Muff To fit JSP EVO & Mk7 helmets Spring loaded arms with international slot that give an excellent fit to the ear When not in use the arms allow the cups to stand off clearly from the head SNR 28 Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

33 Fall Arrest Capital Safety Full Body Harness CONFORMS TO EN361 & EN358 Harness can be precisely adjusted to the user s shape by means of buckles on the chest, thighs and shoulder straps Light materials decrease the weight that is supported throughout the day and also reduces worker fatigue Supple dorsal pad providing a more comfortable fit Larger attachment D rings for easier attachment Labels are protected by a speciallydesigned guard, giving a longer life for the harness Quick-Connect buckles for practical, rapid and simple fitting of the harness Size: Medium/Large Colour: Black/Red Code: Capital Safety Positioning Trigger CONFORMS TO EN358 Unrivalled level of control over the length of the lanyard Effortless shortening of the lanyard Quick connection/disconnection by double action snap hook connector Connection of the trigger device by a lightweight aluminium twist-lock karabiner Highly resistant robe protection sleeve Code: Capital Safety Anchorage Sling CONFORMS TO EN795:2012 CLASS B & EN566:AND AT THE HARMONIZED STANDARD N : 2007 & EN354:2010 Webbing Red polyester Width 25 mm System breaking strength: 22kN Net weight: 200g Code: Capital Safety Shock Absorbing Lanyard CONFORMS TO EN355 Absorbing element Tear strap polyamide Security polyester webbing - width = 45 mm Impact force reduction < 6 Kn Webbing Polyester Width 25 mm Sewing Thread high strength polyamide Karabiners Strength (A) > 2500 dan (B) > 2200 dan Opening (A) : 17 mm - (B) : 60 mm (A) forged steel - white electro-zinc-plated (B) forged alloy - polished System breaking strength : >1500 dan Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

34 Site Equipment Varta LED x4 Head Light Pivoting water-repellent head Adjustable head strap 3 Position slide switch 3x white LED 1x red LED for night vision Supplied with 3 AAA batteries Weight: 100g Code: Varta Industrial 2D Cell Weather Resistant Rubber Torch Durable high-performance shock proof torch Prismatic reflector Weather resistant 3 Positions focusing, spot - to flood and handle with clip Resistant to chemicals like common industrial solvents, gasoline, oil, diesel fuel Requires 2xD type batteries (not included) Colour: Yellow Code: Small Clips for Petzl Headtorch Helmet set of 4 E04350 (CSP) Code: Contractor All Purpose Lamp Fitted with Krypton bulb that is 70% brighter than a vacuum bulb Patented frensel lens focuses light to maximise brightness Shatterproof case Recessed easy to use push button switch Easy grip handle Water resistant seal Requires 4R25 (996 type) 6v battery (not supplied) Colour: Red Code: LED Lenser HR7.2 Rechargeable LED Head Torch H7R Rechargeable Torch 3 x AAA Ni-Mh batteries included Max Watt - 3. Power supply - 3 x AAA alkaline batteries included Effective range: 160m Battery life: 60h,.300 lumens Weight: 120g Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement

35 Site Equipment Varta Pocket Battery Charger Supplied with 2xAA 1,600mah READY2USE batteries Small and compact Charges AA and AAA - best used overnight Size: 100ml sachet Code: Capital Safety Equipment Holdall Comes with Network Rail logo Code: Varta Easy Energy Universal Battery Charger With 5 charging positions Charges all rechargeable battery types Best used overnight Code: Personal Protective Equipment Bags With Network Rail Logo Manufactured in PVC Coated Nylon Nylon heavy duty zip 30mm woven grip handles and shoulder strap One zip main compartment with bottom board and two zip end pockets 38mm woven grip handles Colour: Navy Blue Size: 91x30x30cm (36x12x12 ) Code: Quadra Teamware Holdall With Network Rail Logo Manufactured in 600D polyester/ 420D polyester combination Two large end pockets Internal baseboard Colour: Navy/Putty Size: 62 x 30 x 30CM Code: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement 35

36 ID Badges Banksman ID Badge Code: Lookout ID Badge Code: TS311 COSS PC ID Badge Code: IWA ID Badge Code: COSS Site Warden ID Badge Code: ID Badge Carrier Code: Tick Card Remover Code: Snood Material: 100% polyester microfibre Breathable fabric Seam free for comfort Machine washable/non iron Multi-purpose use Size: 50 x 25 cm Colour: Orange CODE: Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement 36