September The Complete Solution. Copyright (C) Southcott Pty Ltd

Transcription

1 Copyright (C) Southcott Pty Ltd September 2013 Telephone Fax ADELAIDE (08) (08) adelaide.sales@southcott.com.au BRISBANE (07) (07) brisbane.sales@southcott.com.au EMERALD (07) (07) emerald.sales@southcott.com.au DEVONPORT (03) (03) devonport.sales@southcott.com.au LAVERTON (03) (03) laverton.sales@southcott.com.au MACKAY (07) (07) mackay.sales@southcott.com.au MELBOURNE (03) (03) melbourne.sales@southcott.com.au NEWCASTLE (02) (02) newcastle.sales@southcott.com.au PERTH (08) (08) perth.sales@southcott.com.au SYDNEY (02) (02) sydney.sales@southcott.com.au The Complete Solution

2 Important Warnings and Cautions: WARNINGS: Do not mix and match products. The mixing of product brands in hose assemblies is not recommended. Hydraulic hose from one supplier has seldom been verified by testing with fittings from another. Performance capabilities of such mixed assemblies will therefore be unpredictable and are not guaranteed by either supplier. Hose coupling specifications and published assembly instructions are not necessarily valid in these instances. It is the hose assembler s responsibility to consult with suppliers before intermixing hose and end fittings. Similarly, assembly equipment is not usually interchangeable and it is the fabricator s responsibility to consult with the manufacturer for the correct equipment. Always follow the manufacturer s instructions for correct preparation and fabrication of CHILD-GATES hose assemblies. The welding of any CHILD fitting, including weld-on, salvage, lifesaver or any other components should only be carried out by suitably qualified personnel. The Company does not warrant the performance of such fittings or products, once welded (except by the Company, its servants or its selling agents). These welded products should be tested and proved fit for the use intended. Not testing, not proving, faulty fabrication or faulty welding may result in an unsatisfactory or even dangerous product. BE AWARE THAT: Hydraulic fluid under pressure can be potentially dangerous! An explosive burst or stream of escaping fluid can cause damage to equipment or serious injury to persons nearby. Highly pressurized fluid escaping from a small pinhole can be almost invisible, and yet exert extreme force capable of penetrating the skin and other tissues, causing possible severe injury. Pressurized fluids, if released uncontrolled, can exert a tremendous explosive force. Hot fluids or chemicals can cause severe burns. Some fluids are highly flammable CAUTIONS: Working s for Hose Assemblies Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, stated maximum hose working pressures should not be exceeded. For any severe applications it is recommended sufficient testing be conducted and reviewed by both the hose assembler and the machine manufacturer to assure performance levels will be safe and satisfactory. While all care has been taken to ensure that information contained in this catalogue is true and correct at the time of publication, Southcott Hydraulics gives no warranty or assurance, and makes no representation as to the accuracy of any information or advice contained in this catalogue, or that it is suitable for your intended application.

3 Fluid Connectors Product Guide Contents Nomographic Chart... II Oil Flow Capacity Of Hose & Tubing... III Child Coupling End Style Nomenclature... IV SECTION 1: HYDRAULIC HOSE... 1 Extremely High High Medium Fleet Application Thermoplastic Low Refrigerant Industrial Marine Automotive Stainless Steel Fire Suppressant Hose Accessories & Protection SECTION 2: FIELD-FIT COUPLINGS... 2 Lock-On Clamp-On SECTION 3: PERMANENT CRIMP COUPLINGS... 3 Super-Crimp Two-Piece Couplings Ezi-Crimp One-Piece Couplings Global-CrimpTwo-Piece Couplings (GS & GSP) Global-Crimp GSH One-Piece Couplings Maxi-Crimp Two-Piece Couplings Vacu-Crimp One-Piece Couplings SECTION 4: ADAPTORS... 4 SECTION 5: ACCESSORIES... 5 Quick Release Couplings Swivel Joints (Tema) Porta-Power Hoses Pipe Clamps Swivel Joints (Hydraulics Inc) Rotary Couplings (MTC) Gauges Test Points Hydraulic Tube Compression Fittings Hose Clamps Swaging Machines Cut-Off Saws I

4 II

5 OIL FLOW CAPACITY OF HOSE AND TUBING INSIDE DIAMETER SUCTION LINES (-0.25 TO 0 BAR) HIGH EFFICIENCY LINES (0 TO 35 BAR) CONTINUOUS RUN LINES (36 TO 207 BAR) INTERMITTENT RUN LINES (208 BAR & ABOVE) 1.2M/SEC 4FT/SEC 3M/SEC 10FT/SEC 4.5M/SEC 15FT/SEC 6.1M/SEC 20FT/SEC LTR/MIN US GPM LTR/MIN US GPM LTR/MIN US GPM LTR/MIN US GPM 1/ / / / / / / / / / / III

6 Coupling End Style Nomenclature Child couplings feature a meaningful description by combining end-style codes shown below that make thread end identification fast and easy. Always refer to Child Crimp Data Charts when selecting hose and coupling combinations. In the following example, the Child description SFJ90C-0906 identifies a Supercrimp female JIC swivel 90 close coupling for 9/16 thread size and 3/8 hose size. S F J 90 C Series Thread Type Thread Orientation Angle Angle Type Thread Size Hose Size Code Description Code Description Series E Ezicrimp - 1 piece S Supercrimp - 2 piece C5 Field-Fit - suit R5 hose C5E Field-Fit - suit R5E hose R Field-Fit - suit R1, R2 & R3 hose L Lock-On - suit pushlock hose Thread Orientation F Female M Male Thread Type B BSP Tapered DKL DIN Light Series DKS DIN Heavy Series DKO DIN Heavy Series & O-Ring FL Flange Code 61 FLH Flange Code 62 FLK Flange Komatsu FO Flat Face O-Ring (ORFS) G Grease Fitting GAZ French GAZ Thread Type (cont d) HJ Hose Joiner IX SAE Inverted Flare J JIC K JIS-Metric (Japanese) LS Lifesaver N NPT NF NPT - Female Fixed NL NPT - Long Series NP JIS-BSPP (Japanese) OX SAE O-Ring Boss Swivel P BSP Parallel S SAE SS Staple Series Angle (none) Straight Bend Bend Angle Type (none) Standard Drop C Close L Long Drop IV

7 Section 1 Hydraulic Hose Contents... Description...Page Extremely High EFG6K... 4 & 6 Wire Spiral Hose (SAE 100R15) EFG6K-MTF... 4 & 6 Wire Spiral Hose MegaTuff (abrasion-resistant cover)(sae 100R15) EFG5K... 4 & 6 Wire Spiral Hose (SAE 100R13) EFG5K-MTF... 4 & 6 Wire Spiral Hose MegaTuff (abrasion-resistant cover) (SAE 100R13) EFG4K... 4 Wire Spiral Hose (SAE 100R12) EFG4K-MTF... 4 Wire Spiral Hose MegaTuff (abrasion-resistant cover)(sae 100R12) EFG3K Wire Spiral Hose (SAE 100R12 & EN8564SP) EFG3K-MTF Wire Spiral Hose MegaTuff (abrasion-resistant cover)(sae 100R12 & EN8564SP)..1.6 High M5K Wire Braid Hose Mega M5K-XTF Wire Braid Hose Mega 5000 XtraTuff (abrasion-resistant cover) M5K-MTF Wire Braid Hose Mega 5000 MegaTuff (abrasion-resistant cover) M4K Wire Braid Hose Mega M4K-XTF Wire Braid Hose Mega 4000 XtraTuff (abrasion-resistant cover) M4K-MTF Wire Braid Hose Mega 4000 MegaTuff (abrasion-resistant cover) M3K... 1 & 2 Wire Braid Hose Mega 3000 (SAE 100R17) M3K-XTF... 1 & 2 Wire Braid Hose Mega 3000 XtraTuff (abrasion-resistant cover) (SAE 100R17).1.9 M3K-MTF... 1 & 2 Wire Braid Hose Mega 3000 MegaTuff (abrasion-resistant cover (SAE 100R17).1.9 M2T Wire Braid Hose MegaFlex (SAE 100R16) M2T-XTF Wire Braid Hose XtraTuff (abrasion-resistant cover)(sae 100R16) M2T-MTF Wire Braid Hose MegaTuff (abrasion-resistant cover)(sae 100R16) CM2T Wire Braid Hose MegaFlex (SAE 100R2AT) Twin G Wire Braid Hose (SAE 100R2 Type AT & DIN SN) G2XH Wire Braid Hose Extreme Heat (SAE 100R2 & Flame Resistance U.S. MSHA 2G) G2H Wire Braid Hose (SAE 100R2 Type AT & High Temperature DIN SN) J2AT Wire Braid (MHI J100) Medium G Wire Braid Hose (SAE 100R1 Type AT & DIN SN) G1H Wire Braid Hose (SAE 100R1 Type AT & DIN SN) High Temperature MegaTech Wire Braid Hose (SAE J1402, SAE J1019 & DOT FMVSS ) High Temperature 1.16 MegaTech II Wire Braid Hose (SAE 100R2AT & SAE 100 R2 Type S) High Temperature Fleet Application MegaTech Wire Braid Hose (DOT SAE J1019) Hot oil return hose C5C Wire Braid Hose (SAE 100R5) (SAE J1402 Type AII) C5E Wire Braid Hose (SAE J1019 and SAE J1402 Type AI) G3H Textile Braid Hose (SAE 100R3) High Temperature (DIN 20021) Thermoplastic TH Braid Hose (SAE 100R8 Black Covered Pin Perforated Thermoplastic Hose)) TH8NC Braid Hose (SAE 100R8 Orange Covered Non-Conductive Thermoplastic Hose) TH Braid Hose (SAE 100R7 Black Covered Pin Perforated Thermoplastic Hose) TH7NC Braid Hose (SAE 100R7 Orange Covered Non-Conductive Thermoplastic Hose) TH7DL Braid Twin Hose (SAE 100R7 Black Covered Pin Perforated Thermoplastic Hose) TH7NCDL Braid Twin Hose (SAE 100R7 Orange Covered Non-Conductive Thermoplastic Hose).1.24 Low GMV Helical Wire Hose MegaVac (SAE 100R4) Hozeflex Helical Wire Suction Hose RLA Textile Braid Hose (SAE 30R2) LOL Textile Braid Hose (Lock-On) LOC Textile Braid Hose (Textile Cover Lock-On) Due to continual product improvement., we reserve the right to alter specifications without notice 1.1

8 Section 1 Hydraulic Hose Contents... Description...Page Refrigerant Polar Seal Braid Hose (R134a, R12 and R22 Refrigerants) Industrial Powerclean Braid Hose PowerClean Washer Hose Marine C5M Wire Braid (SAE J1527Type A, Class 1, SAE J1952) Fuel Line C5D Wire Braid (SAE J1402 and SAE J1019) Safety Stripe II... Reinforced Nitrile Rubber (SAE 30R6 & SAE 30R7) Textile Braid (SAE 30R6 & SAE 30R7) Automotive PS Synthetic Rubber (SAE J2050 Type 1) Power Steering Hose *... Type P (EPDM) (SAE J1037, SAE J942b) Windshield Washer Hose Air and Multi-Purpose Terminator Textile Braid (MSHA 30 CFR 18.65) Flame Resistant Air & Multipurpose Hose Premo Flex Textile Braid Air & Multipurpose Hose Stainless Steel AFX... 1 or 2 Braid Hose (Stainless Steel Braided Teflon Hose) Fire Suppression RFS Wire Braid (SAE 100R Type S) Flame Resistant Fire Suppressant Hose Hose Accessories HSG... Wire Spring Guard AB00*... Hose Straps & Bunch Binders HPSG... Flat Plastic Guard SGX... Flat Plastic SpiralGuard HNG... Nylon Protective Sleeve LIFEGUARD... Nylon Protective Hose Burst Sleeve Flame Resistant TEXSLEEVE... Nylon Protective Hose Burst Sleeve Flame Resistant HBR... Bend Restrictor HTG... HeatGuard Silicon Fire Jacket Due to continual product improvement., we reserve the right to alter specifications without notice

9 Section 1 Hydraulic Hose GATES EFG6K EXTREMELY HIGH PRESSURE 4 & 6 SPIRAL WIRE HOSE (S.A.E. 100R15) Recommended For: Extremely high pressure, high impulse applications such as hydrostatic transmissions. EFG6K is designed to meet all requirements of SAE 100R15 specifications and performance requirements of EN 856 4SP (-6, -8, -10 and -12) and EN 856 4SH (-12, -16, -20 and -24) Meets flame resistance acceptance designation MSHA 2G Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standard petroleum-based fluids. Revolutionary Design: Makes designing and plumbing of extremely high pressure hydraulic systems easy and efficient. 5/8 to 1 1/2 sizes are available in 36m and 60m continuous lengths. Tube:(EFG6K) Black, oil resistant, synthetic rubber. (Nitrile - Type C). 24G6K neoprene-typea Reinforcement: Four (six for -20 and -24) alternating layers of spiraled, high-tensile steel. Cover: Black, oil resistant, synthetic rubber. (Neoprene- Type A). Blue stripe with gold print layline. Available with unique abrasion-resistant MegaTuff cover Temperature Range: -40 F to +250 F (-40 C to +121 C). Couplings: Global-Crimp series. Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Carton Length Bulk Global-Crimp Non-Skive psi bar psi bar mm m m One Piece Couplings Global-Crimp Non-Skive Stem Series Ferrule Part No 6EFG6K 3/ GS 6GS1F-4 8EFG6K 1/ GS 8GS1F-4 10EFG6K 5/ GS 10GS1F-4 12EFG6K 3/ GS 12GS1F-4 16EFG6K GS 16GS1F-4 20EFG6K 1 1/ GS 20GS1F-6 24EFG6K 1 1/ GSH EFG6K GSH - - GATES EFG6K-MTF EXTREMELY HIGH PRESSURE MEGATUFF SPECIFICATIONS Hose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945 Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Radius Approx. Carton Length Global-Crimp Non-Skive psi bar psi bar mm m One Piece Couplings Global-Crimp Non-Skive Stem Series Ferrule Part No 6EFG6K-MTF 3/ GS 6GS1F-4 8EFG6K-MTF 1/ GS 8GS1F-4 10EFG6K-MTF 5/ GS 10GS1F-4 12EFG6K-MTF 3/ GS 12GS1F-4 16EFG6K-MTF GS 16GS1F-4 20EFG6K-MTF 1 1/ GS 20GS1F-6 24EFG6K-MTF 1 1/ GSH - - Due to continual product improvement., we reserve the right to alter specifications without notice 1.3

10 Section 1 Hydraulic Hose GATES EFG5K EXTREMELY HIGH PRESSURE 4 & 6 SPIRAL WIRE HOSE (S.A.E. 100R13) Recommended For: Extremely high pressure hydraulic applications. EFG5K is designed to meet all requirements of SAE 100R13 specifications and performance requirements of EN 856 4SH (-16, -20, -24 and -32) and EN 856 4SP (-8, -10 and -12). and EN 856 R13. 1/2 to 2 sizes are available in 36m to 61m continuous lengths. Meets flame resistance acceptance designation MSHA 2G Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standard petroleum-based fluids. Tube: Black, oil resistant, synthetic rubber. (Sizes 06 to 20 Nitrile - Type C, sizes 24 & 32 Neoprene - Type A). Reinforcement: Four (six for 20, -24 and -32) layers of alternated, spiraled, high tensile steel wire Cover: Black, oil resistant synthetic rubber (Neoprene-Type A). Blue stripe with red print layline. Temperature Range: -40 F to +250 F (-40 C to +121 C). Couplings: Global-Crimp series. Hose Size I.D. O.D. Working M Burst SPECIFICATIONS M Bend Rad. Carton Length Bulk Global-Crimp Non Skive psi bar psi bar mm m m One Piece Couplings Global-Crimp Non-Skive Stem Series Ferrule Part No 6EFG5K 3/ GS 6GS1F-4 8EFG5K 1/ GS 8GS1F-4 10EFG5K 5/ GS 10GS1F-4 12EFG5K 3/ GS 12GS1F-4 16EFG5K GS 16GS1F-4 20EFG5K 1 1/ GS 20GS1F-6 24EFG5K 1 1/ GSH 32EFG5K GSH - - GATES EFG5K-MTF EXTREMELY HIGH PRESSURE MEGATUFF SPECIFICATIONS Hose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945 Hose Size I.D. O.D. Working M Burst SPECIFICATIONS M Bend Rad. Carton LENGTH Bulk Global-Crimp Non-Skive psi bar psi bar mm m One Piece Couplings Global-Crimp Non-Skive Stem Series Ferrule Part No 6EFG5K-MTF 3/ GS 6GS1F-4 8EFG5K-MTF 1/ GS 8GS1F-4 10EFG5K-MTF 5/ GS 10GS1F-4 12EFG5K-MTF 3/ GS 12GS1F-4 16EFG5K-MTF GS 16GS1F-4 20EFG5K-MTF 1 1/ GS 20GS1F-6 24EFG5K-MTF 1 1/ GSH EFG5K-MTF GSH Due to continual product improvement., we reserve the right to alter specifications without notice

11 Section 1 Hydraulic Hose GATES EFG4K EXTREMELY HIGH PRESSURE 4 SPIRAL WIRE HOSE (S.A.E. 100R12) Recommended For: Extremely high pressure, high impulse applications. Exceeds all performance requirements for SAE 100R12, EN 856 4SP (-16). Meets flame resistance acceptance designation MSHA 2G Compatible with biodegradable hydraulic fluids like polyolester, polyglycole and vegetable oil as well as standard petroleum based fluids. Available in 36 through 60 metre lengths. Tube: Black, oil resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: Four alternating layers of spiraled, high-tensile steel. Cover: Black, oil resistant, synthetic rubber. (Neoprene Type A). Blue stripe with white print layline. Temperature Range: -40 F to +250 F (-40 C to +121 C). Couplings: Super-Crimp and Global-Crimp series. Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Carton psi bar psi bar mm m Length Bulk Super-Crimp Non-Skive Stem Series Ferrule Part No Couplings Global-Crimp Non-Skive Stem Series Ferrule Part No 6EFG4K 3/ S FNS-06 6GS 6GS1F-4 8EFG4K 1/ S FNS-08 8GS 8GS1F-4 10EFG4K 5/ S FNS-10 10GS 10GS1F-4 12EFG4K 3/ S FNS-12 12GS 12GS1F-4 16EFG4K S FNS-16 16GS 16GS1F-4 20EFG4K 1 1/ S FNS-20 20GS 20GS1F-4 GATES EFG4K-MTF EXTREMELY HIGH PRESSURE MEGATUFF SPECIFICATIONS Hose lasts up to 300 times longer than the standard hose during hoseto-hose and hose-to-metal abrasion tests per ISO 6945 Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Carton psi bar psi bar mm m Length Bulk Super-Crimp Non-Skive Stem Series Ferrule Part No Couplings Global-Crimp Non-Skive Stem Series Ferrule Part No 6EFG4K-MTF 3/ S FNS-06 6GS 6GS1F-4 8EFG4K-MTF 1/ S FNS-08 8GS 8GS1F-4 10EFG4K-MTF 5/ S FNS-10 10GS 10GS1F-4 12EFG4K-MTF 3/ S FNS-12 12GS 12GS1F-4 16EFG4K-MTF S FNS-16 16GS 16GS1F-4 20EFG4K-MTF 1 1/ S FNS-20 20GS 20GS1F-4 Due to continual product improvement., we reserve the right to alter specifications without notice 1.5

12 Section 1 Hydraulic Hose GATES EFG3K EXTREMELY HIGH PRESSURE 4 SPIRAL WIRE HOSE (S.A.E. 100R12) Recommended For: Extremely high pressure, high impulse applications. Exceeds all performance requirements for SAE 100R12, EN 856 4SP. Meets flame resistance acceptance designation MSHA 2G Compatible with biodegradable hydraulic fluids like polyolester, polyglycole and vegetable oil as well as standard petroleum based fluids. Available in 36 through 60 metre lengths. Tube: Black, oil resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: Four alternating layers of spiraled, high-tensile steel. Cover: Black, oil resistant, synthetic rubber. (Neoprene Type A). Blue stripe with white print layline. Temperature Range: -40 F to +250 F (-40 C to +121 C). Couplings: Global-Crimp and GSP Series. Hose Size I.D. O.D. Working M Burst SPECIFICATIONS M Bend Rad. Carton psi bar psi bar mm m Lengths Bulk Global-Crimp Non-Skive Stem Series Ferrule Part No Couplings Stem Series GSP Series Non-Skive Ferrule Part No 20EFG3K 1-1/ GS 20GS1F EFG3K 1-1/ GSP 24GSP1F-4 32EFG3K GSP 32GSP1F-4 GATES EFG3K-MTF EXTREMELY HIGH PRESSURE MEGATUFF SPECIFICATIONS Hose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945 Hose Size I.D. O.D. Working M Burst SPECIFICATIONS M Bend Rad. Carton psi bar psi bar mm m Length Bulk Global-Crimp Non-Skive Stem Series Ferrule Part No Couplings GSP Series Non-Skive Stem Series Ferrule Part No 20EFG3K-MTF 1-1/ GS 20GS1F EFG3K-MTF 1-1/ GSP 24GSP1F-4 32EFG3K-MTF GSP 32GSP1F Due to continual product improvement., we reserve the right to alter specifications without notice

13 Section 1 Hydraulic Hose GATES M5K Mega5000 HIGH PRESSURE Recommended For: High pressure hydraulic applications. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil-resistant, synthetic rubber. (Nitrile-Type C). Reinforcement: Two braids of high-tensile steel wire. Cover: Black, oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile-Type C 2 ) Temperature Range:-40 F to +212 F (-40 C to +100 C). Couplings: Gates Mega-Crimp series. I.D. Hose Size O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Reel Length Couplings Mega-Crimp Non-Skive psi bar psi bar mm m One Piece Series 4M5K 1/ G- 6M5K 3/ G- 8M5K 1/ G- XTRATUFF SPECIFICATIONS Hose lasts up to 25times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests I.D. Hose Size O.D. Working M Burst M Bend Rad. Approx. Reel Length Couplings Mega-Crimp Non-Skive psi bar psi bar mm m One Piece Series 4M5K-XTF 1/ G- 6M5K-XTF 3/ G- 8M5K-XTF 1/ G- MEGATUFF SPECIFICATIONS Hose lasts up to 300times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests I.D. Hose Size O.D. Working M Burst M Bend Rad. Approx. Reel Length Couplings Mega-Crimp Non-Skive psi bar psi bar mm m One Piece Series 4M5K-MTF 1/ G- 6M5K-MTF 3/ G- 8M5K-MTF 1/ G- Due to continual product improvement., we reserve the right to alter specifications without notice 1.7

14 Section 1 Hydraulic Hose GATES M4K Mega4000 HIGH PRESSURE (exceeds SAE 100R19 & ISO11237 R19) Recommended For: High pressure hydraulic applications. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil-resistant, synthetic rubber (Nitrile- Type C). Reinforcement: Two braids of high tensile steel wire. Cover: Black, oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile- Type C 2 ). Available with unique abrasion resistant Megatuff cover. Temperature Range: -40 F to +212 F (-40 C to +100 C). Couplings: Super-Crimp, Global-Crimp and Mega-Crimp series. Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Super-Crimp Non-Skive Stem Series Ferrule Part No Couplings Global-Crimp Non-Skive Stem Series Ferrule Part No 4M4K 1/ S FN4P M4K 3/ S FN4P M4K 1/ S FNP M4K 5/ S FNP M4K 3/ S FNS M4K GS 16GS1F-4 EXTRATUFF SPECIFICATIONS Hose lasts up to 25 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Super-Crimp Non-Skive Stem Series Ferrule Part No Couplings Global-Crimp Non-Skive Stem Series Ferrule Part No 4M4K -XTF 1/ S FN4P M4K -XTF 3/ S FN4P M4K -XTF 1/ S FNP M4K-XTF 5/ S FNP M4K-XTF 3/ S FNS M4K-XTF GS 16GS1F-4 MEGATUFF SPECIFICATIONS Hose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Super-Crimp Non-Skive Stem Series Ferrule Part No Couplings Global-Crimp Non-Skive Stem Series Ferrule Part No 4M4K -MTF 1/ S FN4P M4K -MTF 3/ S FN4P M4K -MTF 1/ S FNP M4K-MTF 5/ S FNP M4K -MTF 3/ S FNS M4K -MTF GS 16GS1F Due to continual product improvement., we reserve the right to alter specifications without notice

15 Section 1 Hydraulic Hose GATES M3K Mega3000 HIGH PRESSURE (exceeds SAE 100R17 & ISO11237 R17) 225 bar 3250 psi Recommended For: High pressure hydraulic oil lines. M3K hose has smaller exterior dimensions and significantly tighter bend radius than other SAE 100R1 and 100R2 hose. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil-resistant, synthetic rubber (Nitrile-Type C). Reinforcement: Braided high tensile steel wire. -4, -6 and -8 sizes are one braid; -10, -12 and -16 sizes are two-braid. Cover: Black, oil, abrasion and weather resistant, synthetic rubber. (Modified Nitrile-Type C 2 ). Temperature Range: -40 F to +212 F (-40 C to +100 C) Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series. I.D. Hose Size O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Stem Series Super-Crimp Non-Skive Couplings Ferrule Part No Ezi-Crimp Non-Skive 4M3K 1/ S FN3P-04 E 6M3K 3/ S FN3P-06 E 8M3K 1/ S FN3P-08 E 10M3K 5/ S FNP-10-12M3K 3/ S FNP-12 E 16M3K S FNS-16 - One Piece Series EXTRATUFF SPECIFICATIONS Hose lasts up to 25 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests SPECIFICATIONS I.D. Hose Size O.D. Working M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Stem Series Super-Crimp Non-Skive Couplings Ferrule Part No Ezi-Crimp Non-Skive 4M3K-XTF 1/ S FN3P-04 E 6M3K-XTF 3/ S FN3P-06 E 8M3K-XTF 1/ S FN3P-08 E 10M3K-XTF 5/ S FNP-10-12M3K-XTF 3/ S FNP-12 E 16M3K-XTF S FNS-16 - One Piece Series MEGATUFF SPECIFICATIONS Hose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests SPECIFICATIONS I.D. Hose Size O.D. Working M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Stem Series Super-Crimp Non-Skive Couplings Ferrule Part No Ezi-Crimp Non-Skive 4M3K-MTF 1/ S FN3P-04 E 6M3K-MTF 3/ S FN3P-06 E 8M3K-MTF 1/ S FN3P-08 E 10M3K-MTF 5/ S FNP-10-12M3K-MTF 3/ S FNP-12 E 16M3K-MTF S FNS-16 - One Piece Series Due to continual product improvement., we reserve the right to alter specifications without notice 1.9

16 Section 1 Hydraulic Hose GATES M2T MegaFlex HIGH PRESSURE (SAE 100R16) EXTRA FLEXIBLE Recommended For: High pressure hydraulic oil lines. Exceeds SAE 100R16 requirements and meets or exceeds EN 853 2SN. M2T hose has smaller exterior dimensions and significantly tighter bend radius. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil-resistant, synthetic rubber. (Nitrile- Type C). Reinforcement: Two braids, of high-tensile steel wire. Cover: Black, oil, abrasion and weather resistant, synthetic rubber. (Modified Nitrile-Type C 2 ). Green stripe layline. Temperature Range: -40 F to +212 F (-40 C to +100 C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series. Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx Reel Length psi bar psi bar mm m Super-Crimp Non-Skive Stem Series Couplings Ferrule Part No Ezi-Crimp Non-Skive One Piece Series 4M2T 1/ S FNP-03 E 6M2T 3/ S FNM2P-06 E 8M2T 1/ S FNM2P-08 E 10M2T 5/ S FNM2P-10-12M2T 3/ S FNM2P-12 E 16M2T S FNM2P-16 - EXTRATUFF SPECIFICATIONS Hose lasts up to 25 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests SPECIFICATIONS Hose Size I.D. O.D. Working M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Super-Crimp Non-Skive Stem Series Couplings Ferrule Part No Ezi-Crimp Non-Skive One Piece Series 4M2T-XTF 1/ S FNP-03 E 6M2T-XTF 3/ S FNM2P-06 E 8M2T-XTF 1/ S FNM2P-08 E 10M2T -XTF 5/ S FNM2P-10-12M2T -XTF 3/ S FNM2P-12 E 16M2T -XTF S FNM2P-16 - MEGATUFF SPECIFICATIONS Hose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Super-Crimp Non-Skive Stem Series Couplings Ferrule Part No Ezi-Crimp Non-Skive One Piece Series 4M2T-MTF 1/ S FNP-03 E 6M2T-MTF 3/ S FNM2P-06 E 8M2T-MTF 1/ S FNM2P-08 E 10M2T -MTF 5/ S FNM2P-10-12M2T -MTF 3/ S FNM2P-12 E 16M2T -MTF S FNM2P Due to continual product improvement., we reserve the right to alter specifications without notice

17 Section 1 Hydraulic Hose GATES CM2T MegaFlex TWIN HOSE HIGH PRESSURE EXTRA FLEXIBLE (SAE 100R16) Recommended For: High pressure hydraulic oil lines such as forklift applications. Exceeds SAE100R16 requirements and meets or exceeds performance standards of EN 857 2SC and ISO/DIS 1436 CM2T hose has a smaller exterior dimensions and significantly tighter bend radius. Meets flame resistance acceptance designation MSHA 2G Tube: Black oil resistant, synthetic rubber (Nitrile-Type C). Reinforcement: Two braids, of high-tensile steel wire. Cover: Black oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile - Type C 2 ) Temperature Range: -40 F to +212 F (-40 C to +100 C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series. I.D. Hose Size O.D. Working SPECIFICATIONS M Burst M Bend Rad. psi bar psi bar mm Stem Series Super-Crimp Non-Skive Couplings Ferrule Part No Ezi-Crimp Non-Skive One Piece Series 6CM2T 3/ S FNM2P-06 E 8CM2T 1/ S FNM2P-08 E Due to continual product improvement., we reserve the right to alter specifications without notice 1.11

18 Section 1 Hydraulic Hose GATES G2 HIGH PRESSURE (SAE 100R2AT & SAE 100R2 Type S) Recommended For: High pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S and performance requirements of EN 853 2SN. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil-resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: Two braids of high-tensile steel wire. Cover: Black, oil and abrasion resistant thin synthetic rubber (Modified Nitrile - Type C 2 ). Temperature Range: -40 F to +212 F (-40 C to +100 C). Couplings: Super-Crimp, Ezi-Crimp and Gates MegaCrimp series couplings. Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Carton Length Approx. Reel Length psi bar psi bar mm m m Super-Crimp Non-Skive Stem Series Couplings Ferrule Part No Ezi-Crimp Non-Skive One Piece Series 4G2 1/ S FNP-04 E 5G2 5/ S FNP-05-6G2 3/ S FNP-06 E 8G2 1/ S FNP-08 E 10G2 5/ S FNP-10-12G2 3/ S FNP-12 E 16G S FNP-16-20G2 1 1/ S FNP-20-24G2 1 1/ S FNP-24-32G S FNP-32 - GATES G2XH 2Wire Braid Extreme Heat Hose HIGH PRESSURE (SAE 100R2AT) Recommended For: High-pressure hydraulics applications where pressure or temperature requirements exceed SAE 100R2AT or where resistence to either petroleum-base or phosphate ester fluids is required. Meets or exceeds the requirements of SAE 100R2 Type AT. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil and chemical resistant, synthetic rubber. (CPE) Reinforcement: Two braids of high-tensile steel wire. Cover: Blue, oil and abrasion resistant thin synthetic rubber (CSM) Flame Resistant U.S MSHA 2G Temperature Range: -40 F to +300 F (-40 C to +149 C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series. Hose Size I.D. O.D. Working M Burst SPECIFICATIONS M Bend Rad. Approx. Carton Length Approx. Reel Length psi bar psi bar mm m m Stem Series Couplings Super-Crimp Non-Skive Ferrule Part No Ezi-Crimp Non-Skive 4G2XH 1/ S FNP-04 E 6G2XH 3/ S FNP-06 E 8G2XH 1/ S FNP-08 E 10G2XH 5/ S FNP-10-12G2XH 3/ S FNP-12 E 16G2XH S FNP-16-20G2XH 1-1/ S FNP-20 One Piece Series 1.12 Due to continual product improvement., we reserve the right to alter specifications without notice

19 Section 1 Hydraulic Hose GATES G2H 2 WIRE BRAID HOSE NON-SKIVE HIGH TEMPERATURE (SAE 100R2AT) Recommended For: High pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and performance requirements of EN 853. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil-resistant, synthetic rubber (Nitrile - Type C). Reinforcement: Two braids of high-tensile steel wire. Cover: Black, oil resistant, synthetic rubber. (Hypalon - Type M). Temperature Range: -40 F to +275 F (-40 C to +135 C) constant and +300 F (+149 C) intermittent- up to 10% of operating time. Couplings: Super-Crimp series. I.D. Hose Size O.D. Hypalon is a registered trademark of DuPont Working SPECIFICATIONS M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Couplings Super-Crimp Non-Skive Stem Series Ferrule Part No 20G2H 1 1/ S FNP-20 24G2H 1 1/ S FNP-24 32G2H S FNP-32 Due to continual product improvement., we reserve the right to alter specifications without notice 1.13

20 Section 1 Hydraulic Hose GATES J2AT JACKLINE HOSE HIGH PRESSURE 2 WIRE BRAID MHI - IJ100 Recommended For: Hydraulic jack applications. Meets Material Handling Institute specification IJ 100 for hydraulic hose and assemblies used with jacking systems. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: Two braids of high tensile steel wire. Cover: Black, oil and abrasion resistant synthetic rubber. (Modified Nitrile - Type C 2 ) Temperature Range: -40 F to +120 F (-40 C to +49 C). Couplings: Super-Crimp and Ezi-Crimp series. I.D. Hose Size O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Carton Length psi bar psi bar mm m Stem Series Couplings Super-Crimp Non-Skive Ferrule Part No Ezi-Crimp Non-Skive One Piece Series 4J2AT 1/ S FNP-04 E 6J2AT 3/ S FNP-06 E 1.14 Due to continual product improvement., we reserve the right to alter specifications without notice

21 Section 1 Hydraulic Hose GATES G1 MEDIUM PRESSURE (SAE 100R1 AT) Recommended For: Medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100R1 Type AT and SAE 100R1 Type S and performance requirements of EN 853 1SN. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil-resistant, synthetic rubber (Nitrile - Type C). Reinforcement: One braid of high-tensile steel wire. Cover: Black, oil and abrasion-resistant, synthetic rubber. (Modified Nitrile - Type C 2 ). Temperature Range: -40 F to +212 F (-40 C to +100 C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series. Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Carton Length Approx. Reel Length psi bar psi bar mm m m Super-Crimp Non-Skive Stem Series Couplings Ferrule Part No Ezi-Crimp Non-Skive 3G1 3/ S FNP-03-4G1 1/ S FNP-04 E 5G1 5/ S FNP-05-6G1 3/ S FNP-06 E 8G1 1/ S FNP-08 E 10G1 5/ S FNP-10-12G1 3/ S FNP-12 E 16G S FNP-16-20G1 1 1/ S FNP-20-24G1 1 1/ S FNP-24-32G S FNP-32 - One Piece Series GATES G1H MEDIUM PRESSURE HIGH TEMPERATURE SAE 100R1 AT Recommended For: Medium pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R1 Type AT. Tube: Black, oil-resistant, synthetic rubber (Nitrile - Type C). Reinforcement: One braid of high-tensile steel wire. Cover: Black, oil and abrasion-resistant, synthetic rubber. (Modified Nitrile - Type C 2 ). Temperature Range: -40 F to +275 F (-40 C to +135 C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series. Hose Size I.D. O.D. Working M Burst SPECIFICATIONS M Bend Rad. Approx. Carton Length Approx. Reel Length psi bar psi bar mm m m Couplings Super-Crimp Non-Skive Stem Series Ferrule Part No Ezi-Crimp Non-Skive One Piece Series 4G1H 1/ S FNP-04 E 6G1H 3/ S FNP-06 E 8G1H 1/ S FNP-08 E 10G1H 5/ S FNP-10-12G1H 3/ S FNP-12 E 16G1H S FNP-16-20G1H 1 1/ S FNP-20-24G1H 1 1/ S FNP-24-32G1H S FNP-32 - Due to continual product improvement., we reserve the right to alter specifications without notice 1.15

22 Section 1 Hydraulic Hose GATES MegaTech 1000 (ACR) MEDIUM PRESSURE HIGH TEMPERATURE SAE J1402, SAE J1019 & DOT FMVSS Recommended For: Air brake, pressurised hot oil return lines and rotary oil/air compressor lines. Meets the requirements of DOT FMVSS , SAE J1402, SAE J1019 performance specifications for high-temperature transmission and lubricating oil systems using petroleum-based oils. Tube: True-bore GTS black tube, specifically compounded for temperature and chemical resistance (CPE - Type J)* Reinforcement: One braid of high-tensile steel wire. Cover: Oil and mildew resistant textile braid, impregnated with synthetic rubber. Temperature Range: Petroleum-base fluids -40 F to +300 F (-40 C to +149 C). Phosphate ester fluids as recommended by the fluid manufacturer, but within a range of -40 F to +212 F (-40 C to +100 C). Couplings: Super-Crimp and Gates Mega-Crimp series. Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Super-Crimp Non-Skive Stem Series Couplings Ferrule Part No Mega-Crimp Non-Skive One Piece Series 4MegaTech1000 1/ S FSP-204 4G- 6MegaTech1000 3/ S FSP-206A 6G- 8MegaTech1000 1/ S FNP-08 8G- 10MegaTech1000 5/ S FNP-10 10G- 12MegaTech1000 3/ S FNP-12 12G- 16MegaTech S FNP-16 16G- 20MegaTech / S FNP-20 20G- GATES MegaTech II (ACP) MEDIUM PRESSURE HIGH TEMPERATURE SAE 100R2AT & SAE 100R2 Type S Recommended For: Multipurpose medium-pressure, hightemperature, air compressor lines, petroleum-base or phosphate ester hydraulic fluid supplies. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S. Tube: Black, oil-resistant, synthetic rubber (CPE - Type J). Reinforcement: Two braids of high-tensile steel wire. Cover: Blue, oil and abrasion-resistant polyester braid. Temperature Range: -40 F to +300 F (-40 C to +149 C). Couplings: Super-Crimp and Gates Mega-Crimp series. Hose Size I.D. O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Reel Length psi bar psi bar mm m Couplings Super-Crimp Non-Skive Stem Series Ferrule Part No 20Megatech II 1-1/ S FNP-20 24Megatech II 1-1/ S FNP-24 32Megatech II S FNP Due to continual product improvement., we reserve the right to alter specifications without notice

23 Section 1 Hydraulic Hose GATES Megatech500 High-Temp Oil/Return Recommended For: Air Brake, pressurized hot oil return lines and rotary oil/air compressor lines. Meets the requirements of DOT SAE J1019 performance specifications for high-temperature transmission and lubricating oil systems using petroleum base oils. Not recommended for petrol or diesel applications. Tube: GTS* black tube, specificallycompounded for temperature and chemical resistance (CPE -Type J) Reinforcement: One braid of high-tensile steel wire. Cover: Oil and mildew resistant textile braid, impregnated with synthetic rubber Temperate Range: Petroleum-base fluids -40 F to +300 F(-40 C to C). Phosphate ester fluids reccommended by the fluid manufacturer, but within range of -40 F F (-40 C to C) Couplings: GL Series I.D. Hose Size O.D. Working M Burst M Bend Rad. Approx. Reel Length Couplings psi bar psi bar mm m GL Series 24Megatech / GL- 32Megatech GL- 40Megatech / GL- 48Megatech GL- GATES C5C FLEET APPLICATION POLYESTER BRAID COVER SAE 100R5 & SAE J1402 Type AII Recommended For: Medium pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filtration lines. Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications. DOT FMVSS Type - All and SAE J1402 Type All for air brake applications (-4 and-12). Not recommended for gasoline or diesel fuel. Tube: -4 and -5: black, oil and heat resistant synthetic rubber (Neoprene Type A). -6 thru -40 (Nitrile - Type C) Reinforcement: One braid of high tensile carbon steel wire over one braid of polyester. Cover: Black, oil and mildew resistant, polyester braid. Temperature Range: Under SAE 100R5 (hydraulic) conditions -40 F to +212 F (-40 C to +100 C). All-purpose fleet application (hot lube oil lines) -40 F to +300 F (-40 C to +149 C). Air to +160 F (+71 C) only. For water emulsions etc. Avoid continuous use at maximum temperature concurrent with maximum working pressure. Couplings: Super-Crimp and C5 Field-Fit series. Hose Size I.D. O.D. Working M Burst SPECIFICATIONS M Bend Rad. Approx. Carton Length Approx Reel Length psi bar psi bar mm m m Super-Crimp Non-Skive Stem Series Couplings Ferrule Part No Field-Fit/C5 Field Attachable Complete Coupling Series 4C5C 3/ S FSP-204 4C5-5C5C 1/ S FSP-204 5C5-6C5C 5/ S FSP-206A 6C5-8C5C 13/ S FNP-06 8C5-10C5C 1/ S FSP C5-12C5C 5/ S FNP-12 12C5-16C5C 7/ C5-20C5C 1 1/ C5-24C5C 1 3/ C5-32C5C 1 13/ C5-40C5C 2 3/ Due to continual product improvement., we reserve the right to alter specifications without notice 1.17

24 Section 1 Hydraulic Hose GATES C5E FLEET APPLICATION POLYESTER BRAID COVER SAE J1019 & SAE J1402 Type AI (-4 to -12) Recommended For: Air brake hose, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), fuel filter, engine and transmission coolant lines, and hot (+300 F) lube oil lines. Tube: Black, oil and heat resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: One braid of high-tensile steel wire over one braid of polyester. Cover: Black, oil and heat resistant, textile braid impregnated with synthetic rubber. Green stripe for easy identification. Temperature Range: -40 F to +300 F (-40 C to +149 C). Air +250 F (+121 C) maximum only. Couplings: Super-Crimp and Field-Fit C5E series. Hose Size I.D. O.D. Working M Burst SPECIFICATIONS M Bend Rad. Approx Carton Length Approx Reel Length psi bar psi bar mm m m Super-Crimp Non-Skive Stem Series Couplings Ferrule Part No Field-Fit/C5E Field Attachable Complete Coupling Series 4C5E 3/ C5E- 5C5E 1/ S FSP-204 5C5E- 6C5E 5/ S FNP-05 6C5E- 8C5E 13/ S FNP-06 8C5E- 10C5E 1/ S FSP C5E- 12C5E 5/ S FNP-10 12C5E- 16C5E 7/ C5E- 20C5E 1 1/ C5E Due to continual product improvement., we reserve the right to alter specifications without notice

25 Section 1 Hydraulic Hose GATES G3H MEDIUM PRESSURE SAE-100R3 Recommended For: Hydraulic oil lines, anti-freeze solutions or water. Meets or exceeds requirements of SAE 100R3. Tube: Black, synthetic rubber (Nitrile - Type C). Reinforcement: Two fibre braids. Cover: Black, oil and abrasion resistant, synthetic rubber (Neoprene - Type A). Temperature Range: For hydraulic oil lines -40 F to 275 F (-40 C to +135 C) constant and +300 F (+149 C) intermittent (up to 10% of operating time). Couplings: Super-Crimp series. Hose Size I.D. O.D. Vacuum Working SPECIFICATIONS M Burst M Bend Rad. Approx. Carton Length Ins. Hg psi bar psi bar mm m Skive Length Couplings Super-Crimp Skive Skive Diameter Stem Series Ferrule Part No 4G3H 1/ mm 13.7mm S FSP-204 6G3H 3/ mm 17.5mm S FSP-206A 8G3H 1/ mm 22.8mm S FSP G3H 3/ mm 30.5mm S FSP G3H mm 36.8mm S FSP C3H 1 1/ Non-Skive Non-Skive S FSP-220 Due to continual product improvement., we reserve the right to alter specifications without notice 1.19

26 Section 1 Hydraulic Hose GATES TH8 THERMOPLASTIC SAE 100R8 Recommended For: Use with petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction equipment. TH8 hoses meet or exceed performance requirements of SAE 100R8 with significantly tighter bend radius. Multiline available. Tube: 100% seamless Nylon Type Z. Easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol. Reinforcement: Two polyester braids. Cover: Black urethane resists hydraulic fluids, high temperatures, aging and weather. Black cover is perforated for use in general hydraulic and pneumatic service. Temperature Range: -65 F to +200 F (-54 C to +93 C) continuous service for petroleum and synthetic oils. Maximum of 158 F (+70 C) for water, water/oil emulsions and water glycol. Couplings: Gates Mega-Crimp series. I.D. Hose Size O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Carton Length Couplings Mega-Crimp Non-Skive psi bar psi bar mm m One Piece Series 4TH8 1/ G- 6TH8 3/ G- 8TH8 1/ G- 12TH8 3/ G- GATES TH8NC THERMOPLASTIC - NON-CONDUCTIVE SAE 100R8 Recommended For: Use with petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction equipment. TH8 hoses meet or exceed performance requirements of SAE 100R8 with significantly tighter bend radius. Multiline available. Tube: 100% seamless Nylon Type Z. Easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol. Reinforcement: Two polyester braids. Cover: Orange urethane resists hydraulic fluids, high temperatures, aging and weather. Orange cover is non-perforated for applications requiring electrical non-conductivity. Meets SAE 100R8 Electrical Conductivity test. Temperature Range: -65 F to +200 F (-54 C to +93 C) continuous service for petroleum and synthetic oils. Maximum of 158 F (+70 C) for water, water/oil emulsions and water glycol. Couplings: Gates Mega-Crimp series. I.D. Hose Size O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Carton Length Couplings Mega-Crimp Non-Skive psi bar psi bar mm m One Piece Series 4TH8NC 1/ G- 6TH8NC 3/ G- 8TH8NC 1/ G Due to continual product improvement., we reserve the right to alter specifications without notice

27 Section 1 Hydraulic Hose GATES TH7 THERMOPLASTIC SAE 100R7 Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. TH7 hose meets or exceed performance requirements of SAE 100R7 with significantly tighter bend radius. Tube: 100% seamless nylon- Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol. Reinforcement: Synthetic Fibre. Cover: Black polyurethane that resists hydraulic fluids, high temperatures, aging and weathering. Black TH7 is perforated for use in general hydraulic and pneumatic service. Temperature Range: -65 F to 200 F (-54 C to +93 C) continuous service for petroleum and synthetic oils. Maximum of +158 F (+70 C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp series and Gates Mega-Crimp series. I.D. Hose Size O.D. Working SPECIFICATIONS (Black cover) M Burst M Bend Radius Approx. Carton Length psi bar psi bar mm m Stem Series Super-Crimp Non-Skive Couplings Ferrule Part No. Mega-Crimp Non-Skive One Piece Series 2TH7 1/ PCTS 3TH7 3/ PCTS 4TH7 1/ S FSP-204 4G- 5TH7 5/ G- 6TH7 3/ S FSP-206A 6G- 8TH7 1/ S FSP-208 8G- 12TH7 3/ G- 16TH G- Due to continual product improvement., we reserve the right to alter specifications without notice 1.21

28 Section 1 Hydraulic Hose GATES TH7NC THERMOPLASTIC - NON-CONDUCTIVE SAE 100R7 Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. Orange colour TH7NC meets SAE 100R7 non-conductivity requirements. TH7NC hose meets or exceeds performance requirements of SAE 100R7 with significant tighter bend radius. Tube: -2, -12 and -16: 100% seamless nylon- Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol. -3 through -8 Polyester. Reinforcement: Synthetic fibre. Cover: Orange urethane that resists hydraulic fluids, high temperatures, aging and weathering. Orange TH7NC is non-perforated for applications requiring electrical non-conductivity. Meets SAE 100R7 Electrical Conductivity Test. Maximum leakage shall not exceed 50 microamperes when subjected to 75 kv/ft for five minutes. Temperature Range: -65 F to 200 F (-54 C to +93 C) continuous service for petroleum and synthetic oils. Maximum of +158 F (+70 C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp and Gates Mega-Crimp series. Hose Size I.D. O.D. Working SPECIFICATIONS (Orange Cover) M Burst M Bend Radius Approx. Carton Length psi bar psi bar mm m Stem Series Super Crimp Non-Skive Couplings Ferrule Part No. Mega-Crimp Non-Skive One Piece Series 2TH7NC 1/ PCTS 3TH7NC 3/ PCTS 4TH7NC 1/ S FSP-204 4G- 6TH7NC 3/ S FSP-206A 6G- 8TH7NC 1/ S FSP-208 8G- 12TH7NC 3/ G- 16TH7NC G Due to continual product improvement., we reserve the right to alter specifications without notice

29 Section 1 Hydraulic Hose GATES TH7DL THERMOPLASTIC SAE 100R7 Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. TH7DL hoses meets or exceed performance requirements of SAE 100R7 with significantly tighter bend radius. Tube: 100% seamless nylon- Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol. Reinforcement: Synthetic fibre. Cover: Black urethane that resists hydraulic fluids, high temperatures, aging and weathering. Black TH7DL is perfotated for use in general hydraulic and pneumatic service. Temperature Range: -65 F to 200 F (-54 C to +93 C) continuous service for petroleum and synthetic oils. Maximum of +158 F (+70 C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp and Gates Mega-Crimp series. I.D. Hose Size O.D. Working SPECIFICATIONS (Black cover) M Burst M Bend Radius Approx. Carton Length psi bar psi bar mm m Stem Series Super-Crimp Non-Skive Couplings Ferrule Part No. Mega-Crimp Non-Skive One Piece Series 4TH7DL 1/ S FSP-204 4G- 5TH7DL 5/ G- 6TH7DL 3/ S FSP-206A 6G- 8TH7DL 1/ S FSP-208 8G- Due to continual product improvement., we reserve the right to alter specifications without notice 1.23

30 Section 1 Hydraulic Hose GATES TH7NCDL THERMOPLASTIC SAE 100R7 Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. Orange colour TH7NCDL meets SAE 100R7 non-conductivity requirements. TH7NCDL hoses meets or exceed performance requirements of SAE 100R7 with significantly tighter bend radius. Tube: Polyester Reinforcement: Braided synthetic fibre. Cover: Orange urethane that resists hydraulic fluids, high temperatures, aging and weathering. Orange TH7NCDL is non-perforated for applications requiring electrical non-conductivity-. Meets SAE 100R7 Electrical Conductivity Test. Maximum leakage shall not exceed 50 microamperes when subjected to 75 kv/ft. for five minutes. (Orange is industry accepted colour for non-conductive hose.) Temperature Range: -65 F to 200 F (-54 C to +93 C) continuous service for petroleum and synthetic oils. Maximum of +158 F (+70 C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp and Gates Mega-Crimp series. Hose Size I.D. O.D. Working SPECIFICATIONS (Orange cover) M Burst M Bend Rad. Approx. Carton Length psi bar psi bar mm m Super Crimp Non-Skive Stem Series Couplings Ferrule Mega-Crimp Non-Skive One Piece Series 4TH7NCDL 1/ S FSP-204 4G- 6TH7NCDL 3/ S FSP-206A 6G- 8TH7NCDL 1/ S FSP-208 8G Due to continual product improvement., we reserve the right to alter specifications without notice

31 Section 1 Hydraulic Hose GATES GMV MegaVac LOW PRESSURE (SAE 100R4) Recommended For: Petroleum and water-base hydraulic fluids in suction lines or in low pressure return lines. Meets or exceeds requirements of SAE 100R4. Uses half the bend radius of SAE100R4. Meets flame resistance acceptance designation MSHA 2G Tube: Black, synthetic nitrile rubber is specifically designed for resistance to high temperatures. (Nitrile - Type C) Reinforcement: Double spiral textile (braid for ) reinforced with a helical spiral-wire to prevent collapse. Cover: Black synthetic rubber is oil and abrasion resistant. (Neoprene - Type A) Temperature Range: -40 F to +275 F (-40 C to +135 C) constant and +300 F (+149 C) intermittent (up to 10% of operating time). Couplings: Super-Crimp, Clamp-On, Gates Mega-Crimp and GL series. Hose Size I.D. O.D. Vacuu m Working SPECIFICATIONS M Burst M Bend Rad. Approx Carton Length Super- Crimp Vacu- Crimp Ins. Hg psi bar psi bar mm m Ferrule One Piece Couplings Super Clamp Clamp-On Non-Skive T-Bolt Clamp 12GMV 3/ , FSS-12 - SP GMV FSP SP GMV 1 1/ FSP SP GMV 1 1/ FSP SP GMV FSP SP GMV 2 1/ GL SP GMV 2 1/ GL SP GMV GL SP GMV 3 1/ GL SP GMV GL SP HOZEFLEX LOW PRESSURE OIL DELIVERY AND SUCTION Recommended For: The transfer of oils and petroleum-based products with aromatic content below 50%. Also suitable on hydraulic systems such as hydraulic oil return lines. Tube: Black Nitrile Rubber Reinforcement: High tensile textile cords, steel wire helix. Cover: Black, oil and weather resistant chloroprene rubber Temperature Range: -20 C to +70 C). Couplings: Field-Fit Clamp-On series. I.D. Hose Size O.D. Working SPECIFICATIONS Approx Carton Length psi bar m Stem Series Couplings Clamp-On Clamp Non-Skive Super Clamp T-Bolt Clamp Part No. RS / Clamp-On SP RS / Clamp-On SP RS Clamp-On SP RS / Clamp-On SP RS / Clamp-On SP RS Clamp-On SP RS / Clamp-On SP RS Clamp-On SP Due to continual product improvement., we reserve the right to alter specifications without notice 1.25

32 Section 1 Hydraulic Hose GATES RLA LOW PRESSURE (SAE 30R2) Recommended For: Low-pressure hydraulics oil return lines for general purpose water, glycol antifreeze solutions, converying diesel fuel, gasoline or air. Meets 30R2 performance requirements for both Type 1 and Type 2. Tube: Black, synthetic rubber, oil resistant (Nitrile - Type C) Reinforcement: One fibre braid (-3 to -10). Spiral braid (-12 to -16) Cover: Black synthetic rubber. Oil and abrasion resistant. (Modified Nitrile - Type C) Temperature Range: -40 F to +212 F (-40 C to +100 C). Air to +160 F (+71 C) only. Couplings: Super-Crimp and Gates Mega-Crimp series. Hose Size I.D. O.D. Vacuum Working SPECIFICATIONS M Burst M Bend Rad. Approx Carton Length Ins. Hg psi bar psi bar mm m Super Crimp Non-Skive Stem Series Couplings Ferrule Part No Mega-Crimp Non-Skive One Piece Series 3RLA 3/ P FSP-203-4RLA 1/ S FSP-204 4G- 5RLA 5/ P FSP-205 5G- 6RLA 3/ S FSP-206A 6G- 8RLA 1/ S FSP-208 8G- 10RLA 5/ S FSP G- 12RLA 3/ S FSP G- 16RLA S FSP G Due to continual product improvement., we reserve the right to alter specifications without notice

33 Section 1 Hydraulic Hose GATES LOL+ LOW PRESSURE Recommended For: Petroleum-base hydraulic oils, water, glycol antifreeze solutions, engine lubricating oils, and air. Lock-On hose and couplings are NOT recommended for pressure surge applications or critical applications such as permanent piping in residential or commercial buildings. Do not use for gasoline or diesel fuels, unless approved by Gates H/C Product Application. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil-resistant synthetic rubber highly resistant to oil and heat (Nitrile - Type C). Reinforcement: One fibre braid. Cover: Oil- and abrasion-resistant synthetic rubber (Modified Nitrile- Type C). Available in black-neoprene (LOLA), blue (LOLB), green (LOLG), red (LOLR), yellow (LOLY) and grey (LOLC) colours. Temperature Range: -40 F to +212 F (-40 C to +100 C). For air: 160 F (+71 C) only. Couplings: Field-Fit Lock-On series. I.D. Hose Size O.D. Vacuum SPECIFICATIONS Working M Burst M Bend Rad. Approx. Reel Length Hg psi bar psi bar mm m Couplings Lock-On Non-Skive 3LOLA+ 3/ L 4LOLA+ 1/ L 5LOLA+ 5/ L 6LOLA+ 3/ L 6LOLB+ 3/ L 6LOLR+ 3/ L 6LOLY+ 3/ L 8LOLA+ 1/ L 8LOLB+ 1/ L 10LOLA+ 5/ L 10LOLB+ 5/ L 12LOLA+ 3/ L 12LOLB+ 3/ L One Piece Series GATES LOC LOW PRESSURE Recommended For: Petroleum-base hydraulic oils, glycol anti-freeze compounds, water, hot lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications such as permanent piping in residential or commercial buildings. Tube: Black, oil-resistant synthetic rubber (Nitrile - Type C). Reinforcement: One fibre braid. Cover: Oil and mildew resistant textile braid, impregnated with synthetic rubber. Temperature Range: -40 F to +212 F (-40 C to +100 C). For air: -40 F to +160 F (-40 C to +71 C). Couplings: Field-Fit Lock-On series I.D. Hose Size O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Carton Length psi bar psi bar mm m Couplings Lock-On Non-Skive 4LOC 1/ L 6LOC 3/ L 8LOC 1/ L 10LOC 5/ L 12LOC 3/ L One Piece Series Due to continual product improvement., we reserve the right to alter specifications without notice 1.27

34 Section 1 Hydraulic Hose GATES POLAR SEAL SAE J51 Type D, SAE J2064 Type C, class II Recommended For: Liquid and gaseous R134a and R12 refrigerants in automotive air conditioning and industrial systems; i.e., tractors construction trucks, mobile and stationary refrigeration units. Designed to minimize permeation of R134a refrigerant. Tube: Black synthetic rubber (Chloroprene- Type A). Barrier: Nylon liner. Reinforcement: Two layers of spiral polyester. Cover: Black synthetic rubber (EPDM). Temperature Range: -22 F to +257 F (-30 C to +125 C). Couplings: Gates PolarSeal series. I.D. Hose Size O.D. Working SPECIFICATIONS M Burst M Bend Rad. Suction Approx. Carton Length Couplings Polar Crimp Non-Skive psi bar psi bar mm in Hg m One Piece Series 6AC134A 5/ ACA- 8AC134A 13/ ACA- 10AC134A 1/ ACA- 12AC134A 5/ ACA- GATES POWER CLEAN 1 & 2 WIRE BRAID HOSE Recommended For: For use on hot or cold water, high pressure cleaning equipment NOTE: Not recommended for steam service. Tube: Synthetic rubber specifically compounded to handle high pressure water service. Reinforcement: High tensile steel 1 & 2 wire braid. Cover: Specifically compounded to handle high pressure washer environment. Temperature Range:-40 F to +250 F (-40 C to +121 C) Increased operating temperature will reduce hose assembly service life. Couplings: Super-Crimp and Gates Mega-Crimp series. I.D. Hose Size O.D. Braiding SPECIFICATIONS Working M Bend Rad. psi bar mm Stem Series Couplings Super-Crimp Non-Skive Ferrule Part No 4PC3500-BLACK 1/ wire S FNP-04 4PC6000-BLACK 1/ wire S FNP-04 6PC3000-BLACK 3/ wire S FNP-06 6PC3000-BLUE 3/ wire S FNP-06 6PC5000-BLACK 3/ wire S FNP-06 6PC5000-BLUE 3/ wire S FNP Due to continual product improvement., we reserve the right to alter specifications without notice

35 Section 1 Hydraulic Hose GATES C5M MARINE FUEL LINE HOSE 1 WIRE BRAID HOSE SAE J1527 Type A Class 1 and SAE J1942 Recommended For: On-shore/off-shore and marine diesel fuel and gasoline applications and hot oil lines up to 212 F. Meets marine fuel specifications SAE J1527 Type A Class 1 and SAE J1942 applications. Exceeds performance requirements of SAE J30RZ for non-marine applications. Tube: Nitrile - Type C Reinforcement: One wire braid. Cover: Modified Nitrile - Type C Blue. Temperature Range: -4 F to +212 F (-20 C to +100 C). Couplings: Field-Fit C5 series. I.D. Hose Size O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Carton Length psi bar psi bar mm m Couplings Field-Fit/C5 Field Attachable Complete Coupling Series 5C5M 1/ C5-6C5M 5/ C5-8C5M 13/ C5-10C5M 1/ C5-12C5M 5/ C5- GATES C5D FUEL LINE HOSE 1 WIRE BRAID HOSE SAE J1402 Type All and SAE J1019 Recommended For: Petroleum-base or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), gasoline and turbocharger oil supplies. Tilt cab cylinder and air brakes. C5D (-4 to -12) meets or exceeds DOT FMVSS Type All, SAE J1402 Type All and SAE J1019 and fuel resistence of SAE J30R2. Tube: Black, oil and heat resistent, synthetic rubber (CPE - Type J) Reinforcement: One braid of high tensile steel wire over one braid of polyester. Cover: Green for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber. Temperature Range: -40 F to +300 F (-40 C to +149 C), air to +250 F (+121 C) only, maximum phosphate esters to +212 F (+100 C) only. Couplings: Field-Fit C5 series. I.D. Hose Size O.D. Working SPECIFICATIONS M Burst M Bend Rad. Approx. Carton Length psi bar psi bar mm m Couplings Field-Fit/C5 Field Attachable Complete Coupling Series 4C5D 3/ C5-5C5D 1/ C5-6C5D 5/ C5-8C5D 13/ C5-10C5D 1/ C5-12C5D 5/ C5-16C5D 7/ C5- Due to continual product improvement., we reserve the right to alter specifications without notice 1.29

36 Section 1 Hydraulic Hose GATES SAFETY STRIPE II Fuel Lines/PCV/Evaporative Emission Control Hose SAE 30R6 & 30R7 Recommended For: Multi-purpose hose for use on fuel lines, PVC and EEC systems, and for fuel return hose connections on diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol, methanol and ethers (up to the legal limit allowed by EPA) Tube: Nitrile Rubber* Reinforcement: Reinforced construction. Cover: Oil resistant cover resists the effects of high heat and ozone found in engine compartments. Warning: Do not use for pressure lines on fuel injected engines or for cooling systems applications. (Use MPI Hose). I.D. Hose Size I.D. mm. SPECIFICATIONS Working Suction Approx. Carton Length psi bar In Hg mm Hg m / / / / / Fuel Line & Tank Vent Hose Fuel Lines/Tank Vent Emission Control Hose SAE 30R6 & 30R7 Recommended For: Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. NOTE: Not recommended for fuel injection systems. Tube: Nitrile - Type C.* Reinforcement: Single ply of synthetic fibre Cover: Type C 2 (NBR/PVC). Black. Fuel, oil, ozone and high temperature resistant. Temperature Range: -40 F to +257 F (-40 C to +125 C). I.D. Hose Size I.D. mm. SPECIFICATIONS Working Suction Approx. Carton Length psi bar In Hg mm Hg m / / / / Due to continual product improvement., we reserve the right to alter specifications without notice

37 Section 1 Hydraulic Hose GATES PS-188 POWER STEERING HOSE SAE J2050 Recommended For: Power steering pressure lines. Designed to meet requirements of SAE J2050 specifications. Tube: Synthetic rubber specially compunded to provide resistance to high temperatures and power steering fluid (Hypalon - Type M) Reinforcement: Two high-strength nylon braids that resist high temperatures and allow for expansion for system noise dampening. Cover: Black, synthetic rubber developed specifically to resist under hood environment (Hypalon) Temperature: -40 F to +300 F (-40 C to +150 C) Couplings: Super-Crimp I.D. Hose Size O.D. Working SPECIFICATIONS (Black cover) M Burst M Bend Radius psi bar psi bar mm Stem Series Couplings Super-Crimp Non-Skive Ferrule Part No. 6PS-188 3/ S FSP-206A Windshield Washer (27042) SAE J1037 Recommended For: Ideal for windshield washers and vacuum-operated accessories. Tube: Type P (EPDM). Black. Heat resistant. Reinforcement: Non-reinforced. Cover: Uncovered. Temperature Range: -40 F to +257 F (-40 C to +125 C). Meets: SAE J1037, J942b I.D. SPECIFICATIONS Hose Size Suction Working Nipple Size Approx. Carton Length In Hg mm Hg bar m /64 1/ /32 3/ /32 1/ /4 5/ /16 3/ /8 7/ Due to continual product improvement., we reserve the right to alter specifications without notice 1.31

38 Section 1 Hydraulic Hose GATES TERMINATOR AIR & MULTI-PURPOSE Recommended For: Applications requiring a tough hose with a rugged cover for outstanding abrasion resistance and extended service life where constant flexing and bending is required. This top-of-the-line premium oil resistant hose is designed for applications involving air, oil, and water as well as grease sprays, paraffin waxes, salt solutions and a variety of chemicals. It offers excellent durability for extra long life in mining, air drill, construction, poulry plants, abattoirs, quarries, shipyards, food processing, railroads and other severe service enviroments. It is non-conductive at 1000 volts DC Tube: Black. (Nitrile - Type C). Reinforcement: Synthetic, high tensile textile cord. Cover: Yellow (Carboxylated Nitrile - Type C 4 ). Temperature Range: -40 F to +212 F (-40 C to +100 C). I.D. Hose Size O.D. SPECIFICATIONS Working Suction M Bend Radius Approx. Carton Length psi bar In Hg mm Hg mm m 04TERMINATOR 1/ TERMINATOR 3/ TERMINATOR 1/ TERMINATOR 3/ TERMINATOR GATES PREMO FLEX AIR & MULTI-PURPOSE Recommended For: Applications requiring a premium-grade hose with excellent flexibility and maximum resistance to air, water, petroleum oils, gasoline, kerosene and fuel oil (to 120 F/49 C) and lubricating oils (to 212 F/100 C). Excellent weather and ozone resistance. It is non-conductive to 1000 volts DC. Tube: Black. (Nitrile - Type C). Reinforcement: Synthetic, high tensile textile cord. Cover: Red (Modified Nitrile - Type C 2 ). Temperature Range: -40 F to +212 F (-40 C to +100 C). I.D. Hose Size O.D. SPECIFICATIONS Working Suction M Bend Radius Approx. Carton Length psi bar In Hg mm Hg mm m 4PREMO 1/ PREMO 5/ PREMO 3/ PREMO 1/ PREMO 5/ PREMO 3/ PREMO PREMO 1 1/ PREMO 1 1/ Due to continual product improvement., we reserve the right to alter specifications without notice

39 Section 1 Hydraulic Hose AFX TEFLON HOSE Smooth Bore Heavy Wall Imperial range Meets or exceeds SAE 100R14 working pressure (Dimensionally not the same as SAE 100R14) Recommended For: Hydraulic oil lines, Turbo chargers, Steam, Canning sealant lines, Plastic/Rubber moulding presses, Compressor discharge, Fuel lines, Paint spray, for other applications contact Southcott Pty Ltd. Tube: Teflon*(PTFE) hose core is manufactured from premier quality resin, smooth bore heavy wall. No pigments or additives are incorporated thus giving the hose liner a translucent appearance free from any contamination. Cover/Reinforcement: Stainless steel wire braid produced from AISI 304/S15 or BS quality hard drawn tensile stainless steel wire. Temperature Range: -60 C to +260 C Couplings: Child: Super-Crimp Warning: PTFE has a very high electrical isolation value, a damaging electrostatic charge can build up inside the hose when electrically resistive fluids/gases are being transmitted at high velocity. Review the potential for electrostatic discharge for every application. If in doubt contact your Southcott agent. SAE 100R14 working pressures are rated for dynamic applications. Maximum working pressures will vary depending on operating temperature and impulse frequency * Dupont Registered TM I.D. Hose Size O.D. Max. SAE 100R14 Working SPECIFICATIONS Max. Static Working M Static Burst M Bend Rad. psi bar psi bar psi bar mm Couplings Crimp Non-Skive Stem Series Ferrule Part No AFX2004 1/ S FNT-04 AFX2006 3/ S FNT-06 AFX2008 1/ S FNT-08 AFX2010 5/ S FNT-10 AFX2012 3/ S FNT-12 AFX S FNT-16 GATES RFS US MSHA 2G Recommended For: Low-pressure powder fire suppressant applications in mining, forestry and fire fighting equipment. The red cover is for easy visual identification in these applications. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil resistant synthetic rubber (Nitrile - Type C). Reinforcement: One braid of high-tensile steel wire. Cover: Red, oil and abrasion resistant (Modified Nitrile - Type C) Temperature Range: -40 C to +100 C Couplings: Super-Crimp and Gates Mega-Crimp I.D. Hose Size O.D. Max Working SPECIFICATIONS M Burst M Bend Rad. Super-Crimp S Stems psi bar psi bar mm Ferrule Couplings Mega-Crimp Non-Skive One Piece Series 4RFS 1/ FNP-04 4G- 6RFS 3/ FNP-06 6G- 8RFS 1/ FNP-08 8G- 12RFS 3/ FNP-12 12G- Due to continual product improvement., we reserve the right to alter specifications without notice 1.33

40 Section 1 Hydraulic Hose HSG WIRE SPRING GUARD Part Number A (In.) (±.015) G (In.) P (In.) HSG (.080) 7/32 HSG (.080) 7/32 HSG (.080) 7/32 HSG (.080) 7/32 HSG (.080) 7/32 HSG (.080) 7/32 HSG (.080) 7/32 HSG (.080) 7/32 HSG (.120) 11/32 HSG (.120) 11/32 HSG (.120) 11/32 HSG (.120) 11/32 HSG (.120) 13/32 HSG (.120) 13/32 HSG (.120) 13/32 HSG-15A (.120) 13/32 HSG ( /32 HOSE STRAPS & BUNCH BINDERS Suitable for securing several hoses together Length mm. Type Description BS Non FRAS Rated Hose Strap BS Non FRAS Rated Hose Strap BS Non FRAS Rated Hose Strap BS Non FRAS Rated Hose Strap AB FRAS Rated Hose Strap AB FRAS Rated Hose Strap AB FRAS Rated Hose Strap BUNCH-SS N/A FRAS Rated Bunch Binder in Stainless Steel 1.34 Due to continual product improvement., we reserve the right to alter specifications without notice

41 HPSG FLAT PLASTIC GUARD Section 1 Hydraulic Hose Temperature Range: -40 C to 121 C Part Number Coil I.D. (A) (In.) Strip Width (B) (In.) Thickness (In.) Economical, lightweight plastic sleeving protects hose from water, air, gasoline, oil and hydraulic fluids. Can be used to bundle several hoses together Continuous Length Pkg (m) HPSG-04 1/4 1/ HPSG-06 3/8 1/ HPSG-08 1/2 3/ HPSG-10 5/8 3/ HPSG-12 3/4 3/ HPSG / HPSG /8 5/ HPSG /8 5/ SPIRAL GUARD SGX FLAT PLASTIC SPIRALGUARD SGX Standard: Available in black,blue, yellow and red SGXFRAS Flame Retardant Anti Static: compliance to ISO6805 SPECIFICATIONS Part Number Hose Multi Hose Coil Length Flame Resistant 1-Wire 2-Wire O.D. Range Standard Spiral O.D. Range in m Anti-Static mm SGX12 SGX12FRAS /4-3/8 50 m SGX16 SGX16FRAS /2-5/8 20 m SGX20 SGX20FRAS /8-7/8 20 m SGX25 SGX25FRAS /8-1 1/16 20 m SGX32 SGX32FRAS /16-1 1/4 20 m SGX40 SGX40FRAS /4-1 5/8 20 m SGX50 SGX50FRAS /8-2 1/8 20 m SGX63 SGX63FRAS /2 20 m SGX75 SGX75FRAS /2-3 1/4 10/20 m SGX90 SGX90FRAS Hose looms 80mm - 150mm diameter /20 m SGX110 SGX110FRAS Hose looms 150mm - and above 6 plus 6/10 m SGX125 SGX125FRAS m Due to continual product improvement., we reserve the right to alter specifications without notice 1.35

42 Section 1 Hydraulic Hose HNG NYLON PROTECTIVE SLEEVE SPECIFICATIONS Inside Flat A Sleeve I.D. B ins. mm ins. Colour HNG Black HNG Black HNG Black HNG Black HNG Black HNG Black HNG Black HNG Black HNG Black A ± " 0 ± 0.02" B0 Gates Nylon Sleeves perform a dual role: They provide excellent abrasive resistance to protect individual hoses. They can be used to bundle several hose assemblies together for maximum protection. Downtime and maintenance costs are reduced. Nylon Sleeves are unique because they form an extra protective layer against abrasive forces. Construction: Thousands of tiny Nylon filaments,woven into the texturized yarn, friz providing a self-renewing shield that is extremely resistant to severe abrasion. Note: Do not use Nylon Sleeve where ambient temperature exceeds 120 C. LIFEGUARD HOSE BURST NYLON PROTECTIVE SLEEVE MEETS MDG41 REQUIREMENTS The LifeGuard line-of-sight sleeving system is an effective, economical alternative to costly metal shielding or re-routing of hose lines, and does not affect system performance. With an inner layer of tightly woven filament nylon and an outer layer of textured nylon that also resists abrasion, it meets ISO3457 and MSHA flame-resistance requirements. Part Number Hose Size Contains Hose Bursts Clamps To Suit inch mm Aluminium Stainless Steel 14LG3K 1/ SC4 6SC4SS 16LG3K 3/ SC4 6SC4SS Pin Hole up to 3000 psi 20LG3K 1/ SC4 8SC4SS Burst up to 6000 psi 22LG3K 5/ SC4 10SC4SS 26LG3K 3/ SC4 12SC4SS 32LG3K SC4 16SC4SS 14LG5K 1/ SC4 6SC4SS 16LG5K 3/ SC4 6SC4SS Pin Hole up yo 5000 psi 20LG5K 1/ SC4 8SC4SS Burst up to10000 psi 22LG5K 5/ SC4 10SC4SS 26LG5K 3/ SC4 12SC4SS 1.36 Due to continual product improvement., we reserve the right to alter specifications without notice

43 Section 1 Hydraulic Hose TEXSLEEVE HOSE BURST NYLON PROTECTIVE SLEEVE Flat I.D. (mm) Round Diam. (mm) TEXS Suits G1 & G2 with S series fittings TEXS /16 (-03) TEXS /4 (-04) TEXS /16 (-05) TEXS /8 (-06) TEXS /2 (-08) TEXS /8 (-10) TEXS TEXS TEXS /4 (12) TEXS (-16) TEXS TEXS TEXS /4 (-20) TEXS TEXS /2 (-24) TEXS TEXS (-32) TEXS TEXS MEETS MDG41 REQUIREMENTS TEXSLEEVE is a continuous nylon fibre treated with a special process to eliminate air from between the fibres. This process gives the product a super compact textile wire making it far better than any other standard fibre sleeve on the market. The Department of Primary Industries requires this type of protection for hydraulic hoses where there is potential for harm to personnel or the environment in the event of a hose failure. TEXSLEEVE also has excellent abrasion and fire resistance capabilities making it the top of the line choice in hose protection. Note: TEXSLEEVE can be fitted clamped or unclamped. For best performance it is recommended that shrink-band clamps be used to secure the sleeve over the crimped hose ferrule. See page 5.28 HBR BEND RESTRICTOR I.D. ins. mm ins. mm L Colour Hose Size & Type HBR Black 4G1, 4G1H, 4G2, 4M3K, 4M2T, 4PCI, 4PCII HBR Black 4C2A, 6G1, 6G1H, 6M3K, 6M2T, 6C7S, 6PCI, 6WM HBR Black 6C1A, 6G2, 6PCII HBR Black HBR Black 6C2A, 8G1, 8G1H, 8PCII 8C1A, 8C2A, 10G1, 10G1H,10M2T I.D.0 1 L Flexible Hose Bend Restrictors protect the hose near the coupling. Gates tapered PVC sleeves reduce bending stresses in the hose near the coupling to prevent damage, such as in power wash applications. Installed during the assembly, this smoothly-finished product withstands temperatures from - 40 C to +93 C and is available in nine sizes. Features: Benefits: Tapered Design:Reduces bending stress near the hose-coupling junction, so extra long, more trouble free hose life can be expected. Smooth Finish:Will not scratch finish on equipment being washed. Attractive appearance enhances look of quality. Wide Temperature Range:Helps give extra long service life for both hot and cold power wash assemblies. Friction Fit:No adhesive or clamps required to hold bend restrictor in place on hose assembly. Saves assembly cost. Due to continual product improvement., we reserve the right to alter specifications without notice 1.37

44 Section 1 Hydraulic Hose HeatGuard Silicon Fire Jacket HeatGuard is a completely non-asbestos, heat resistant, protective sleeving. Its special silicone coating can also withstand a broad range of solvents and fuels. It goes on easily over most hoses and couplings, with only hose clamps or wire ties required for fastening. Best of all, HeatGuard can pay for itself in reduced replacement and maintenance costs. HeatGuard is knitted, coated fibreglass; meets SAE AS1072A specification Temperature range: -54 C to +260 C for continuous exposure. I.D. (In) I.D. (In) I.D. (In) HTG-4 1/4 HTG-16 1 HTG /2 HTG HTG HTG HTG-6 3/8 HTG /4 HTG /4 HTG HTG HTG HTG-8 1/2 HTG /2 HTG-48 3 HTG HTG HTG HTG HTG /4 HTG /4 HTG HTG HTG /2 HTG-12 3/4 HTG-32 2 HTG /4 HTG HTG HTG-64 4 HTG HTG /4 HTG-15 15/16 HTG Dash Size C5C C5D C5M C5E G1 G2 M3K M2T M4K M5K M6K C12MG 4K C12 G3K G5K G6K GMV C14 C14NC 2 HTG-12 HTG-12 4 HTG-12 HTG-12 HTG-12 HTG-14 HTG-12 HTG-12 HTG-8 5 HTG-14 HTG-14 HTG-14 HTG-14 HTG-10 6 HTG-16 HTG-16 HTG-16 HTG-14 HTG-16 HTG-16 HTG-16 HTG-12 8 HTG-16 HTG-16 HTG-18 HTG-18 HTG-16 HTG-16 HTG-18 HTG-18 HTG HTG-18 HTG-18 HTG-18 HTG-18 HTG-18 HTG-18 HTG-22 HTG HTG-22 HTG-18 HTG-22 HTG-22 HTG-22 HTG-22 HTG-24 HTG-24 HTG-24 HTG HTG-24 HTG-24 HTG-26 HTG-28 HTG-28 HTG-26 HTG-28 HTG-28 HTG-28 HTG HTG-28 HTG-28 HTG-32 HTG-34 HTG-32 HTG-32 HTG HTG-32 HTG-36 HTG-38 HTG-38 HTG-40 HTG HTG-38 HTG-44 HTG-48 HTG-44 HTG-48 HTG HTG-50 HTG HTG HTG Due to continual product improvement., we reserve the right to alter specifications without notice

45 Section 2 Field-Fit Couplings Contents... Description...Page FIELD-FIT COUPLINGS To suit Gates hose types: G1, G2, C1A, C2A, C3H BN1... Body to suit G1 Hose (Non-Skive) BN2... Body to suit G2 Hose (Non-Skive) BN3... Body to suit C3H Hose (Non-Skive) BS1... Body to suit C1A Hose (Skive) BS2... Body to suit C2A Hose (Skive) RMB... Straight Male BSPT RMP... Straight Male BSPP RMBX... Straight Male BSPT.Swivel RMBX90C Close Male BSPT.Swivel RFB... Straight Female BSPP.Swivel RFB Tube Style Female BSPP.Swivel RFB45C Close Style Female BSPP.Swivel RFB Tube Style Female BSPP.Swivel RFB90C Close Style Female BSPP.Swivel RMJ... Straight Male JIC RFJ... Straight Female JIC Swivel RFJ Tube Style Female JIC Swivel RFJ45C Close Style Female JIC Swivel RFJ Tube Style Female JIC Swivel RFJ90L Long Drop Tube Style Female JIC Swivel RFJ90C Tube Style Female JIC Swivel RFFO... Flat Female Swivel O-Ring Flat Face RFFO Female Swivel O-Ring Flat Face RMN... Straight Male NPTF RFN... Straight Female NPTF RMO... Straight Male S.A.E. O Ring Boss RMOX... Straight Male S.A.E. O Ring Boss Swivel RMOX90C Close Male S.A.E. O Ring Boss Swivel RFL... Straight SAE O Ring Flange (Code 61) RFL SAE O Ring Flange (Code 61) RFL SAE O Ring Flange (Code 61) RMS... Straight Male SAE RFS... Straight Female SAE.Swivel RFS45C Tube Style Female SAE.Swivel RFS Tube Style Female SAE.Swivel RFS90C Close Style Female SAE Swivel RLS... Lifesaver RHJ... Hose Joiner The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 2.1

46 Section 2 Field-Fit Couplings Contents... Description... Page FIELD-FIT/C5 COUPLINGS To suit Gates hose types: C5C, C5D & C5M 5MB...Straight Male BSPT C5-RMP...Straight Male NPTF C5-RFJX...Straight Female JIC Swivel C5-RFJX Tube Style Female JIC Swivel C5-RFJX Tube Style Female JIC Swivel C5-RFJSX...Straight Female JIC/SAE (Dual Cone Seat) Swivel C5-RFJSX Tube Style Female JIC/SAE (Dual Cone Seat) Swivel C5-RFJSX Tube Style Female JIC/SAE (Dual Cone Seat) Swivel C5-RFSX...Straight Female SAE Swivel C5-RFSX Tube Style Female SAE Swivel C5-RFSX Tube Style Female SAE Swivel FIELD-FIT/C5E COUPLINGS To suit Gates hose types: C5E - SAE J1402 Type E.A1.(Air brake) SAE J1019 High Temp C5E-RMP...Straight Male NPTF C5E-RFJX...Straight Female JIC Swivel C5E-RFJX Tube Style Female JIC Swivel C5E-RFJX Tube Style Female JIC Swivel C5E-RFJSX...Straight Female JIC/SAE (Dual Cone Seat) Swivel C5E-RFJSX Tube Style Female JIC/SAE (Dual Cone Seat) Swivel C5E-RFJSX Tube Style Female JIC/SAE (Dual Cone Seat) Swivel C5E-RFSX...Straight Female SAE. Swivel C5E-RFSX Tube Style Female SAE Swivel C5E-RFSX Tube Style Female SAE Swivel C5E-RMIX...Straight Male SAE Inverted Flare C5E-RMIX Male SAE Inverted Flare C5E-RMIX Male SAE Inverted Flare LOCK-ON COUPLINGS LMB...Straight Male BSP.T LFB...Straight Female BSP.P. Swivel LFB90C...90 Close Style Female BSP.P Swivel LMN...Straight Male NPTF LMJ...Straight Male JIC LMS...Straight Male SAE LFJ...Straight Female JIC Swivel LFJS...Straight Female JIC/SAE (Dual Cone Seat) Swivel LFJ Tube Style Female JIC Swivel LFJ90C...90 Close Style Female JIC Swivel LFS...Straight Female SAE Swivel LMIX...Straight Male SAE Inverted Flare LSP...Straight Stand Pipe LHJ...Straight Hose Joiner The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.

47 Section 2 Field-Fit Couplings Contents... Description...Page CLAMP-ON COUPLINGS CB4... Hosetail Male/Male BSPT x LP CP4... Hosetail Male/Male BSPP x LP CM4... Hosetail Male/Male Metric x LP CN4... Hosetail Male/Male NPTF x LP C5... Hosetail Male/Male SAE O-Ring Boss x LP CB5... Hosetail Female/Male BSPT x LP C41... Hosetail 45 Elbow Male/Male SAE O-Ring Boss x LP CB41... Hosetail 45 Elbow Male/Male BSPT x LP CN41... Hosetail 45 Elbow Male/Male NPTF x LP C60... Hosetail 90 Elbow Male/Male SAE O-Ring Boss x LP CB60... Hosetail 90 Elbow Male/Male BSPT x LP CP60... Hosetail 90 Elbow Male/Male BSPP x LP CN60... Hosetail 90 Elbow Male/Male NPTF x LP The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 2.3

48 Section 2 Field-Fit Couplings Body N/Skive 100R1AT One Wire Braid G1 Hose Non-Skive Body Skive 100R1A One Wire Braid C1A Hose Skive Straight Male BSPP G1, G2, C1A, C2A, C3H P/Number......Hose BN /4 BN /8 BN /2 BN /4 BN Body N/Skive 100R2AT Two Wire Braid G2 Hose Non-Skive P/Number......Hose BS /4 BS /8 BS /2 BS /4 BS Body Skive 100R2A Two Wire Braid C2A Hose Skive P/Number...Thread... Hose RMP /8... 3/8 RMP /2... 3/8 RMP /2... 1/2 Straight Male BSPT Swivel G1, G2, C1A, C2A, C3H P/Number......Hose BN /4 BN /8 BN /2 BN /8 BN /4 BN Body N/Skive 100R3 Two Textile Braid C3H Hose Non-Skive P/Number......Hose BS /4 BS /8 BS /2 BS /4 BS Straight Male BSPT G1, G2, C1A, C2A, C3H P/Number...Thread... Hose RMBX /8... 3/8 RMBX /8... 1/2 RMBX /2... 3/8 RMBX /2... 1/2 * RMBX /4... 1/2 RMBX /4... 3/4 90 Close Male BSPT Swivel G1, G2, C1A, C2A, C3H P/Number......Hose BN /4 BN /8 BN /2 BN /4 P/Number... Thread...Hose RMB /8...1/4 RMB /4...1/4 RMB /4...3/8 RMB /8...1/4 RMB /8...3/8 RMB /8...1/2 RMB /2...3/8 RMB /2...1/2 RMB /2...5/8 RMB /2...3/4 RMB /8...1/2 RMB /4...1/2 RMB /4...3/4 RMB /4 RMB P/Number...Thread... Hose RMBX90C /8... 3/8 * RMBX90C /8... 1/2 RMBX90C /2... 3/8 RMBX90C /2... 1/2 RMBX90C /4... 3/4 2.4 *Manufactured To Order - Minimum Order Quantities May Apply

49 Section 2 Field-Fit Couplings Straight Female BSPP Swivel G1, G2, C1A, C2A, C3H 90 Tube Female BSPP Swivel G1, G2, C1A, C2A, C3H Straight Male JIC G1, G2, C1A, C2A, C3H P/Number...Thread... Hose RFB /8... 1/4 RFB /4... 1/4 RFB /4... 3/8 RFB /8... 1/4 RFB /8... 3/8 RFB /8... 1/2 RFB /2... 3/8 RFB /2... 1/2 RFB /8... 1/2 RFB /4... 1/2 RFB /4... 3/4 RFB /4 RFB Tube Female BSPP Swivel G1, G2, C1A, C2A, C3H P/Number...Thread... Hose RFB /4... 1/4 RFB /8... 3/8 * RFB /2... 3/8 RFB /2... 1/2 RFB /4... 3/4 RFB Close Female BSPP Swivel G1, G2, C1A, C2A, C3H P/Number...Thread... Hose RFB45C /4... 1/4 RFB45C /8... 3/8 RFB45C /2... 3/8 RFB45C /2... 1/2 RFB45C /4... 3/4 RFB45C P/Number...Thread...Hose RFB /4...1/4 RFB /8...3/8 RFB /2...3/8 RFB /2...1/2 RFB /4...3/4 RFB Close Female BSPP Swivel G1, G2, C1A, C2A, C3H P/Number...Thread...Hose * RFB90C /8...1/4 RFB90C /4...1/4 RFB90C /4...3/8 RFB90C /8...1/4 RFB90C /8...3/8 RFB90C /8...1/2 RFB90C /2...3/8 RFB90C /2...1/2 RFB90C /4...1/2 RFB90C /4...3/4 RFB90C P/Number... Thread...Hose RMJ /16...1/4 RMJ /2...1/4 RMJ /16...1/4 RMJ /16...3/8 RMJ /16...1/2 RMJ /4...3/8 RMJ /4...1/2 RMJ /8...3/8 RMJ /8...1/2 RMJ /8...5/8 RMJ /8...3/4 RMJ /16...1/2 RMJ /16...5/8 RMJ /16...3/4 RMJ /16...3/4 RMJ / Straight Female JIC Swivel G1, G2, C1A, C2A, C3H P/Number... Thread...Hose RFJ /16...1/4 RFJ /2...1/4 RFJ /16...1/4 RFJ /16...3/8 RFJ /16...1/2 RFJ /4...3/8 RFJ /4...1/2 RFJ /8...3/8 RFJ /8...1/2 RFJ /8...5/8 RFJ /8...3/4 RFJ /16...1/2 RFJ /16...5/8 RFJ /16...3/4 RFJ / RFJ /16...3/4 RFJ /16...3/4 RFJ / *Manufactured To Order - Minimum Order Quantities May Apply 2.5

50 Section 2 Field-Fit Couplings 45 Female JIC Swivel G1, G2, C1A, C2A, C3H 90 Female JIC Long Drop Swivel G1, G2, C1A, C2A, C3H 90 Female Swivel Flat Faced O-Ring (ORFS) G1, G2, C1A, C2A, C3H P/Number... Thread...Hose RFJ /16...1/4 * RFJ /2...1/4 RFJ /16...1/4 RFJ /16...3/8 RFJ /4...3/8 RFJ /4...1/2 RFJ /8...1/2 RFJ /16...3/4 RFJ / Close Female JIC Swivel G1, G2, C1A, C2A, C3H P/Number... Thread...Hose RFJ90L /16...1/4 RFJ90L /16...1/4 RFJ90L /16...3/8 RFJ90L /4...3/8 RFJ90L /4...1/2 RFJ90L /8...1/2 RFJ90L /16...3/4 RFJ90L /16...3/4 90 Close Female JIC Swivel G1, G2, C1A, C2A, C3H P/Number...Thread... Hose RFFO / /4 RFFO / /4 RFFO / /8 RFFO / /2 RFFO /2 Straight Male NPTF G1, G2, C1A, C2A, C3H P/Number... Thread...Hose RFJ45C /16...1/4 RFJ45C /2...1/4 RFJ45C /16...1/4 RFJ45C /16...3/8 RFJ45C /4...3/8 RFJ45C /4...1/2 RFJ45C /8...1/2 RFJ45C /16...3/4 * RFJ45C / Tube Female JIC Swivel G1, G2, C1A, C2A, C3H P/Number... Thread...Hose RFJ /16...1/4 RFJ /2...1/4 RFJ /16...1/4 RFJ /16...3/8 RFJ /4...3/8 RFJ /4...1/2 RFJ /8...1/2 RFJ /8...5/8 RFJ /16...1/2 RFJ /16...5/8 RFJ /16...3/4 RFJ / P/Number... Thread...Hose RFJ90C /16...1/4 RFJ90C /2...1/4 RFJ90C /16...1/4 RFJ90C /16...3/8 RFJ90C /16...1/2 RFJ90C /4...3/8 RFJ90C /4...1/2 RFJ90C /8...1/2 RFJ90C /8...1/2 RFJ90C /16...3/4 RFJ90C / Straight Female Swivel Flat Faced O-Ring (ORFS) G1, G2, C1A, C2A, C3H P/Number... Thread...Hose RFFO /16...1/4 RFFO /16...1/4 RFFO /16...3/8 RFFO /16...1/2 RFFO /2 P/Number...Thread... Hose RMN /4... 1/4 RMN /4... 3/8 RMN /8... 1/4 RMN /8... 3/8 RMN /2... 1/2 RMN /4... 1/2 RMN /4... 3/4 * RMN Straight Female NPTF G1, G2, C1A, C2A, C3H P/Number...Thread... Hose RFN /4... 1/4 RFN /4... 3/8 RFN /2... 1/2 2.6 *Manufactured To Order - Minimum Order Quantities May Apply

51 Section 2 Field-Fit Couplings Straight Male S.A.E. O Ring Boss G1, G2, C1A, C2A, C3H Straight SAE O Ring Flange G1, G2, C1A, C2A, C3H Code 61 Straight Female SAE Swivel G1, G2, C1A, C2A, C3H P/Number...Thread... Hose RMO /4... 3/8 RMO /4... 1/2 RMO /8... 3/8 RMO /8... 1/2 90 Duro O Ring supplied Straight Male S.A.E. O Ring Boss (Swivel) G1, G2, C1A, C2A, C3H P/Number...Flange...Hose RFL /4...3/4 * RFL /4 RFL * RFL / Duro O Ring supplied 45 SAE O Ring Flange G1, G2, C1A, C2A, C3H Code 61 P/Number... Thread...Hose RFS /16...1/4 RFS /2...3/8 RFS /8...3/8 RFS /4...3/8 45 Close Female SAE Swivel G1, G2, C1A, C2A, C3H P/Number... Thread...Hose * RFS45C /8...3/8 P/Number...Thread... Hose RMOX /4... 3/8 * RMOX /4... 1/2 RMOX /8... 3/8 RMOX /8... 1/2 * RMOX / /2 * RMOX / /4 RMOX / Duro O Ring supplied 90 Close Male S.A.E. O Ring Boss (Swivel) G1, G2, C1A, C2A, C3H P/Number...Thread... Hose RMOX90C /4... 3/8 RMOX90C /4... 1/2 * RMOX90C /8... 3/8 RMOX90C /8... 1/2 RMOX90C / /4 90 Duro O Ring supplied P/Number...Flange...Hose * RFL /4 * RFL /4...3/4 * RFL / Duro O Ring supplied 90 SAE O Ring Flange G1, G2, C1A, C2A, C3H Code 61 P/Number...Flange...Hose RFL /4...3/4 90 Duro O Ring supplied Straight Male SAE G1, G2, C1A, C2A, C3H P/Number...Thread...Hose RMS /2...1/4 * RMS /8...3/8 RMS /4...3/8 90 Tube Female SAE Swivel G1, G2, C1A, C2A, C3H P/Number... Thread...Hose * RFS /8...3/8 90 Close Female SAE Swivel G1, G2, C1A, C2A, C3H P/Number... Thread...Hose * RFS90C /16...1/4 RFS90C /8...3/8 RFS90C /4...3/8 *Manufactured To Order - Minimum Order Quantities May Apply 2.7

52 Section 2 Field-Fit Couplings Lifesaver G1, G2, C1A, C2A, C3H P/Number... Tube...Hose RLS /4...1/4 * RLS /8...1/4 RLS /8...3/8 * RLS /2...3/8 RLS /2...1/2 RLS /8...1/2 RLS /4...3/4 RLS Hose Joiner G1, G2, C1A, C2A, C3H P/Number......Hose RHJ /4 RHJ /8 RHJ /2 RHJ /4 * RHJ *Manufactured To Order - Minimum Order Quantities May Apply

53 Section 2 Field-Fit / C5 Couplings Straight Male BSPT C5C, C5D & C5M Hose Straight Female JIC Swivel C5C, C5D & C5M Hose Straight Female JIC/SAE Dual Seat Swivel C5C, C5D & C5M Hose P/Number...Thread... Hose 5MB /8... 3/16 5MB /4... 3/16 Straight Male NPTF C5C, C5D & C5M Hose P/Number...Thread... Hose 4C5-2RMP...1/8... 3/16 4C5-4RMP...1/4... 3/16 5C5-4RMP...1/4... 1/4 6C5-4RMP...1/4... 5/16 6C5-6RMP...3/8... 5/16 8C5-8RMP...1/ /32 12C5-12RMP...3/4... 5/8 16C5-16RMP /8 P/Number...Thread...Hose 6C5-6RFJX...9/16...5/16 8C5-6RFJX...9/ /32 10C5-12RFJX...1-1/16...1/2 12C5-12RFJX...1-1/16...5/8 16C5-16RFJX...1-5/16...7/8 20C5-20RFJX...1-5/ /8 24C5-24RFJX...1-7/ /8 32C5-32RFJX...2-1/ /16 45 Tube Female JIC Swivel C5C, C5D & C5M Hose P/Number...Thread...Hose 6C5-6RFJX45...9/16...5/16 12C5-12RFJX /16...5/8 16C5-16RFJX /16...7/8 90 Tube Female JIC Swivel C5C, C5D & C5M Hose P/Number... Thread...Hose 4C5-4RFJSX... 7/16...3/16 5C5-5RFJSX... 1/2...1/4 8C5-8RFJSX... 3/4...13/32 10C5-10RFJSX... 7/8...1/2 45 Tube Female JIC/SAE Dual Seat Swivel C5C, C5D & C5M Hose P/Number... Thread...Hose 4C5-4RFJSX /16...3/16 * 5C5-5RFJSX /2...1/4 8C5-8RFJSX /4...13/32 10C5-10RFJSX /8...1/2 90 Tube Female JIC/SAE Dual Seat Swivel C5C, C5D & C5M Hose P/Number...Thread...Hose 6C5-6RFJX90...9/16...5/16 12C5-12RFJX /16...5/8 16C5-16RFJX /16...7/8 P/Number... Thread...Hose 4C5-4RFJSX /16...3/16 5C5-5RFJSX /2...1/4 8C5-8RFJSX /4...13/32 10C5-10RFJSX /8...1/2 *Manufactured To Order - Minimum Order Quantities May Apply 2.9

54 Section 2 Field-Fit / C5 Couplings Straight Female SAE Swivel C5C, C5D & C5M Hose P/Number... Thread...Hose 6C5-6RFSX... 5/8...5/16 10C5-12RFSX /16...1/2 12C5-12RFSX /16...5/8 45 Tube Female SAE Swivel C5C, C5D & C5M Hose P/Number... Thread...Hose 6C5-6RFSX /8...5/16 12C5-12RFSX /8...5/16 90 Tube Female SAE Swivel C5C, C5D & C5M Hose P/Number... Thread...Hose 6C5-6RFSX /8...5/16 12C5-12RFSX /16...5/ *Manufactured To Order - Minimum Order Quantities May Apply

55 Effective Date 01/12/2008 Section 2 Field-Fit / C5E Couplings Straight Male NPTF C5E Hose Straight Female JIC Swivel C5E Hose Straight Female JIC/SAE Dual Seat Swivel C5E Hose P/Number...Thread... Hose 4C5E-2RMP...1/8... 3/16 4C5E-4RMP...1/4... 3/16 5C5E-4RMP...1/4... 1/4 6C5E-6RMP...3/8... 5/16 8C5E-8RMP...1/ /32 10C5E-8RMP...1/2... 1/2 12C5E-12RMP...3/4... 5/8 12C5E-16RMP /8 16C5E-16RMP /8 P/Number...Thread...Hose 6C5E-6RFJX...9/16...5/16 12C5E-12RFJX...1-1/16...5/8 16C5E-16RFJX...1-5/16...7/8 45 Tube Female JIC Swivel C5E Hose P/Number... Thread...Hose 4C5E-4RFJSX... 7/16...3/16 5C5E-5RFJSX... 1/2...1/4 8C5E-8RFJSX... 3/4...13/32 45 Tube Female JIC/SAE Dual Seat Swivel C5E Hose P/Number...Thread...Hose * 6C5E-6RFJX45...9/16...5/16 * 12C5E-12RFJX /16...5/8 90 Tube Female JIC Swivel C5E Hose P/Number... Thread...Hose 4C5E-4RFJSX /16...3/16 8C5E-8RFJSX /4...13/32 10C5E-10RFJSX /8...1/2 90 Tube Female JIC/SAE Dual Seat Swivel C5E Hose P/Number...Thread...Hose 6C5E-6RFJX90...9/16...5/16 12C5E-12RFJX /16...5/8 16C5E-16RFJX /16...7/8 P/Number... Thread...Hose 4C5E-4RFJSX /16...3/16 8C5E-8RFJSX /4...13/32 10C5E-10RFJSX /8...1/2 *Manufactured To Order - Minimum Order Quantities May Apply 2.11

56 Section 2 Field-Fit / C5E Couplings Straight Female SAE Swivel C5E Hose Straight Male SAE Inverted Flare C5E Hose P/Number... Thread...Hose 6C5E-6RFSX... 5/8...5/16 45 Tube Female SAE Swivel C5E Hose P/Number... Thread...Hose 4C5E-4RMIX... 7/16...3/16 5C5E-5RMIX... 1/2...1/4 6C5E-6RMIX... 5/8...5/16 8C5E-8RMIX... 3/4...13/32 45 Tube Male SAE Inverted Flare C5E Hose P/Number... Thread...Hose 6C5E-6RFSX /8...5/16 90 Tube Female SAE Swivel C5E Hose P/Number... Thread...Hose 6C5E-6RMIX /8...5/16 8C5E-8RMIX /4...13/32 90 Tube Male SAE Inverted Flare C5E Hose P/Number... Thread...Hose 6C5E-6RFSX /8...5/16 P/Number... Thread...Hose 4C5E-4RMIX /16...3/16 5C5E-5RMIX /2...1/4 6C5E-6RMIX /8...5/16 8C5E-8RMIX /4...13/ *Manufactured To Order - Minimum Order Quantities May Apply

57 Section 2 Lock-On Couplings Straight Male BSPT LOL/LOC Hose 90 Female BSPP Swivel LOL/LOC Hose Straight Male SAE LOL/LOC Hose P/Number...Thread... Hose LMB /8... 1/4 LMB /8... 5/16 LMB /4... 1/4 LMB /4... 5/16 LMB /4... 3/8 LMB /8... 1/4 LMB /8... 3/8 LMB /8... 1/2 LMB /2... 3/8 LMB /2... 1/2 LMB /4... 3/4 Straight Female BSPP Swivel LOL/LOC Hose P/Number...Thread... Hose LFB /8... 1/4 LFB /4... 1/4 LFB /4... 5/16 LFB /8... 1/4 LFB /8... 3/8 LFB /8... 1/2 LFB /2... 3/8 LFB /2... 1/2 LFB /2... 5/8 LFB /4... 3/4 P/Number...Thread...Hose LFB90C /4...1/4 LFB90C /4...5/16 * LFB90C /8...1/4 LFB90C /8...3/8 LFB90C /2...1/2 LFB90C /4...3/4 Straight Male NPTF LOL/LOC Hose P/Number...Thread...Hose LMN /8...1/4 LMN /8...5/16 * LMN /4...1/4 * LMN /4...3/8 * LMN /8...3/8 * LMN /2...1/2 Straight Male JIC LOL/LOC Hose P/Number...Thread...Hose LMJ /16...1/4 LMJ /2...1/4 LMJ /16...1/4 * LMJ /16...3/8 * LMJ /4...3/8 * LMJ /4...1/2 * LMJ /8...1/2 * LMJ /8...5/8 * LMJ /16...3/4 P/Number... Thread...Hose LMS /16...1/4 LMS /2...3/8 Straight Female JIC LOL/LOC Hose P/Number... Thread...Hose LFJ /16...1/4 LFJ /16...3/8 LFJ /4...3/4 LFJ /16...3/4 Straight Female JIC/SAE Dual Seat Swivel LOL/LOC Hose P/Number... Thread...Hose LFJS /16...1/4 LFJS /2...1/4 LFJS /2...5/16 LFJS /4...3/8 LFJS /4...1/2 LFJS /8...1/2 LFJS /8...5/8 *Manufactured To Order - Minimum Order Quantities May Apply 2.13

58 Section 2 Lock-On Couplings 90 Tube Female JIC Swivel LOL/LOC Hose Straight Male SAE Inverted Flare LOL/LOC Hose P/Number... Thread...Hose LFJ /16...3/8 LFJ /4...3/8 LFJ /4...1/2 LFJ /8...1/2 LFJ /16...3/4 90 Close Female JIC Swivel LOL/LOC Hose P/Number... Thread...Hose LMIX /16...1/4 * LMIX /2...1/4 LMIX /8...3/8 Standpipe LOL/LOC Hose P/Number... Thread...Hose LFJ90C /16...1/4 LFJ90C /16...1/4 LFJ90C /16...3/8 LFJ90C /4...3/8 LFJ90C /4...1/2 LFJ90C /16...3/4 P/Number... Hose...Hose * LSP /4...1/4 LSP /16...1/4 * LSP /8...3/8 * LSP /2...1/2 LSP-15M mm...1/2 Hose Joiner LOL/LOC Hose Straight Female SAE LOL/LOC Hose P/Number... Hose...Hose LFS /8...3/8 P/Number... Hose...Hose LHJ /4...1/4 LHJ /16...5/16 LHJ /8...3/8 LHJ /2...3/8 LHJ /2...1/2 LHJ /8...5/8 LHJ /4...3/ *Manufactured To Order - Minimum Order Quantities May Apply

59 Section 2 Clamp-On Suction Hose Tails Clamp-on Hosetail M/M BSPT x Tail Clamp-on Hosetail M/M BSPP x Tail Clamp-on Hosetail M/M NPTF x Tail P/Number... Thread... Hose CB /4... 1/4 CB /4... 3/8 CB /4... 1/2 CB /8... 1/4 CB /8... 3/8 CB /8... 1/2 CB /8... 5/8 CB /2... 3/8 CB /2... 1/2 CB /2... 5/8 CB /2... 3/4 CB / CB /4... 3/4 CB / CB / /4 CB /4 CB CB /4 CB /2 CB / CB / /4 CB / /2 CB / /4 CB / /2 CB / CB * CB /2 * CB / /2 P/Number...Thread...Hose CP /8...3/4 CP /2...3/4 CP / CP / /4 CP /4...3/4 CP / CP / /4 CP / /2 CP CP /4 CP /2 CP / CP / /4 CP / /2 CP / /2 CP / CP / CP Clamp-on Hosetail M/M Metric x Tail P/Number...Thread...Hose CN /4...1/4 CN /4...3/8 CN /8...3/8 CN /8...1/2 CN /8...5/8 * CN /2...1/2 CN /2... 5/8 CN /4...3/4 CN /4...1 CN CN /4 CN /2 CN /8 CN / /4 CN / /2 CN /2...1 CN / /4 CN / /2 CN /2...2 CN Clamp-on Hosetail M/M S.A.E. O Ring Boss x Tail P/Number...Thread...Hose CM M CM M /2 P/Number...Thread...Hose C /4...1/2 C /4... 3/4 C /8...1/2 C /8... 3/4 C / /4 * C /16...3/4 C / C / /4 * C / /4 C / C / /4 C / /2 C / /4 C / /2 C / /2 *Manufactured To Order - Minimum Order Quantities May Apply 2.15

60 Section 2 Clamp-On Suction Hose Tails Clamp-on Hosetail F/M BSPP x Tail Clamp-on Hosetail 45 Elbow. M/M NPTF x Tail Clamp-on Hosetail 90 Elbow M/M BSPT x Tail P/Number...Thread...Hose CB /4...3/4 CB CB / /4 Clamp-on Hosetail 45 Elbow. M/M S.A.E. O Ring Boss x Tail P/Number...Thread...Hose C /4...3/4 * C /8...1/2 C / * C / * C / /4 * C / /2 * C / /4 * C / /2 Clamp-on Hosetail 45 Elbow. M/M BSPT x Tail P/Number...Thread...Hose CB /2...1/2 CB /4...3/4 CB /4...1 CB CB /4 CB / /4 CB / /2 P/Number...Thread...Hose * CN /2...3/4 * CN /2...3/4 CN /4...3/4 CN /4...1 CN / /4 CN CN /4 * CN / /4 Clamp-on Hosetail 90 Elbow M/M S.A.E. O Ring Boss x Tail P/Number...Thread...Hose * C /16...5/16 * C /16...1/2 C /4...1/2 C /4...5/8 C /4...3/4 C /8...3/4 * C /8...1 C / /4 * C /16...5/8 C /16...3/4 C / C / /4 C /16...3/4 C / C / /4 C / /2 C / /4 C / /2 C / /2 P/Number... Thread... Hose CB /8... 1/4 CB /4... 5/16 CB /4... 3/8 * CB /8... 1/2 CB /8... 5/8 CB /8... 3/4 CB /2... 3/8 CB /2... 1/2 CB /2... 3/4 CB /4... 3/4 CB / CB / /4 CB /4 CB CB /4 CB /2 CB / CB / /4 CB / /2 CB / /4 CB / /2 CB / /2 CB *Manufactured To Order - Minimum Order Quantities May Apply

61 Section 2 Clamp-On Suction Hose Tails Clamp-on Hosetail 90 Elbow M/M BSPP x Tail Clamp-on Hosetail 90 Elbow M/M NPTF x Tail P/Number... Thread... Hose CP /8... 1/2 CP /8... 3/4 CP /2... 3/4 CP / CP /4... 3/4 CP / CP / /4 CP CP /4 CP /2 CP /2 CP / CP / /4 CP / /2 CP / CP / /2 CP / P/Number... Thread...Hose CN /4...1/4 CN /4...3/8 CN /4...1/2 CN /4...5/8 CN /8...3/8 CN /8...1/2 CN /8...5/8 CN /8...3/4 CN /2...1/2 CN /2... 3/4 * CN /4...3/4 CN / * CN /4 CN * CN /4 * CN /2 * CN / CN / /4 CN / /2 CN / /2 *Manufactured To Order - Minimum Order Quantities May Apply 2.17

62 2.18 My Notes

63 Section 3 Permanent Couplings Contents... Description...Page SUPER-CRIMP TWO PIECE COUPLINGS To suit Gates hose types: EFG4K, C12M, C12H, CPB+, M3K, M2T,G2, G2H, J2AT, G1, C5C,C5E, C3, C3H, GMV, GT7, GT8, C12-MTF, M3K-MTF, M2T-MTF and J2AT-MTF. FNP...Ferrule to suit G1 and G2 Hose; Non Skive FN3P...Ferrule to suit M3K Hose; Non Skive FN4P...Ferrule to suit M4K Hose; Non Skive FSP...Ferrule to suit C5C, C5E, GMV, C3H & TH7 Hose; Skive & Non-Skive FNM2P...Ferrule to suit M2T Hose; Non Skive FNT...Ferrule to suit AFX2000 series Teflon hose FNS...Ferrule to suit C12 & EFG4K Hose; Non Skive FSS...Ferrule to suit C12 Hose; Skive SMB...Straight Male BSPT SMBX...Straight Male BSPT Swivel SMBX90C...90 Close Male BSPT Swivel SFB...Straight Female BSPP Swivel SFB Tube Style Female BSPP Swivel SFB Tube Style Female BSPP Swivel SFB90C...90 Close Female BSPP Swivel SFBZ...Straight Female Flat face BSPP Swivel SMJ...Straight Male J.I.C SFJ...Straight Female J.I.C. Swivel SFJ Tube Style Female J.I.C. Swivel SFJ45C...45 Close Female J.I.C. Swivel SFJ Tube Style Female J.I.C. Swivel SFJ90L...90 Tube Style Female J.I.C. Long Swivel SFJ90C...90 Close Style Female J.I.C. Swivel SMORF...Straight Male ORFS SFFO...Straight Female Flat Face O-Ring (ORFS) Swivel SFFO Tube Female Flat Face O-Ring (ORFS) Swivel SFFO90S...90 Tube Style Female Flat Face O-Ring (ORFS) Short Drop Swivel SFFO90L...90 Tube Style Female Flat Face O-Ring (ORFS) Long Drop Swivel SFNP...Straight Female BSPP JAPANESE JIS B8363 Swivel 30 Cone Seat SFK...Straight Female METRIC JAPANESE JIS B8363 Swivel 30 Cone Seat SFK Female METRIC JAPANESE JIS B8363 Swivel 30 Cone Seat SFK Female METRIC JAPANESE JIS B8363 Swivel 30 Cone Seat SMN...Straight Male N.P.T.F SMNL...Straight Male N.P.T.F. Long Series SFNF...Straight Female N.P.T.F. Fixed SHJ...Hose Joiner SLS...Lifesaver Hose End SMOX...Straight Male S.A.E. O-Ring Boss Swivel (U.N. O-Ring) SMOX90C...90 Male S.A.E. O-Ring Boss Swivel (U.N. O-Ring) SFS...Straight Female S.A.E. Swivel SFS Female S.A.E. Swivel SMIX...Straight Male S.A.E. INVERTED FLARE Swivel SMIX Tube Style Male S.A.E. INVERTED FLARE Swivel The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 3.1

64 Section 3 Permanent Couplings Contents... Description... Page SUPER-CRIMP TWO PIECE COUPLINGS Cont d SMIX Tube Style Male S.A.E. INVERTED FLARE Swivel SFDKO...Straight Female DIN Heavy Series O-Ring Seal Swivel SFDKO Female DIN Heavy Series O-Ring Seal Swivel SFDKO Female DIN Heavy Series O-Ring Seal Swivel SMDKS...Straight Male DIN Heavy Series SFDKL...Straight Female DIN Light Series Universal Cone Seat 24 /60 Swivel SFDKL Tube Style Female DIN Light Series Universal Cone Seat 24 /60 Swivel Swivel SFDKL Tube Style Female DIN Light Series Universal Cone Seat 24 /60 Swivel Swivel SMDKL...Straight Male DIN Light Series SMGAZ...Straight Male French Series SFGAZ...Straight Female French Series SSS...Straight Male STAPLE LOCK System HAMMER-CRIMP TWO PIECE COUPLINGS FNH...Ferrule to suit EFG4K Non Skive; Hammer-Crimp HFB...Straight Female Hammer Coupling SUPER-CRIMP TWO PIECE COUPLINGS SFL...Straight S.A.E. O-Ring Flange Code SFLK...Straight Komatsu O-Ring Flange SFL /2 S.A.E. O-Ring Flange Code SFL S.A.E. O-Ring Flange Code SFL S.A.E. O-Ring Flange Code SFLK Komatsu O-Ring Flange SFL S.A.E. O-Ring Flange Code SFL S.A.E. O-Ring Flange Code SFL S.A.E. O-Ring Flange Code SFLK Komatsu O-Ring Flange SFL90L...90 S.A.E. O-Ring Flange Long Drop Code SFL S.A.E. O-Ring Flange Code SFL S.A.E. O-Ring Flange Code SFLH...Straight S.A.E. O-Ring Flange Code SFLH S.A.E. O-Ring Flange Code SFLH S.A.E. O-Ring Flange Code EZI-CRIMP ONE PIECE COUPLINGS EMB...Straight Male BSPT EMR...Straight Male BSP.P Encapsulated Seal EFB...Straight Female BSPP Swivel EFB Tube Style Female BSPP Swivel EFB90C...90 Close Female BSPP Swivel EMNL...Straight Male NPT (suit Porta-Power hoses) EMJ...Straight Male J.I.C EFJ...Straight Female J.I.C. Swivel EFJ Close Female J.I.C. Swivel EFJ Tube Style Female J.I.C. Swivel EFJ90L...90 Tube Style Female J.I.C. Swivel Long Drop EFJ90C...90 Close Style Female J.I.C. Swivel The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.

65 Section 3 Permanent Couplings Contents... Description...Page EZI-CRIMP ONE PIECE COUPLINGS Cont d EFFO...Straight Female Flat Face O-Ring (ORFS) Swivel EFFO Tube Style Female Flat Face O-Ring (ORFS) Swivel EFFO Tube Style Female Flat Face O-Ring (ORFS) Swivel GLOBAL-CRIMP GS & GSP TWO PIECE COUPLINGS GS1F...Global Spiral Ferrules (Non-Skive) MB...Male O-Ring Boss MP...Male Pipe NPTF 30 Cone Seat MBSPP...Male British Standard Pipe Parallel FBSPORX...Female British Standard Pipe Parallel O-Ring Swivel FBSPORX45...Female British Standard Pipe Parallel O-Ring Swivel 45 Bent Tube FBSPORX90...Female British Standard Pipe Parallel O-Ring Swivel 90 Bent Tube MJ...Male JIC 37 Flare FJX...Female JIC 37 Flare Swivel FJX45...Female JIC 37 Flare Swivel 45 Bent Tube FJX90...Female JIC 37 Flare Swivel 90 Bent Tube MFFOR...Male Flat Face O-Ring FFORX...Female Flat Face Swivel FFORX45...Female Flat Face Swivel 45 Bent Tube FFORX90...Female Flat Face Swivel 90 Bent Tube MDH...Male 24 Cone Heavy Series FDHORX...Female DIN 24 Cone Swivel Heavy Series With O-Ring FDHORX45...Female DIN 24 Cone Swivel Heavy Series With O-Ring 45 Bent Tube FDHORX90...Female DIN 24 Cone Swivel Heavy Series With O-Ring 90 Bent Tube FL...Code 61 O-Ring Flange FL22...Code 61 O-Ring Flange 22.5 Bent Tube FL30...Code 61 O-Ring Flange 30 Bent Tube FL45...Code 61 O-Ring Flange 45 Bent Tube FL60...Code 61 O-Ring Flange 60 Bent Tube FL67...Code 61 O-Ring Flange 67.5 Bent Tube FL90...Code 61 O-Ring Flange 90 Bent Tube FL110...Code 61 O-Ring Flange 110 Bent Tube FLH...Code 62 O-Ring Flange Heavy FLH22...Code 62 O-Ring Flange Heavy 22.5 Bent Tube FLH30...Code 62 O-Ring Flange Heavy 30 Bent Tube FLH45...Code 62 O-Ring Flange Heavy 45 Bent Tube FLH60...Code 62 O-Ring Flange Heavy 60 Bent Tube FLH90...Code 62 O-Ring Flange Heavy 90 Bent Tube FLC...Caterpillar Style O-Ring Flange FLC22...Caterpillar Style O-Ring Flange 22.5 Bent Tube FLC30...Caterpillar Style O-Ring Flange 30 Bent Tube FLC45...Caterpillar Style O-Ring Flange 45 Bent Tube FLC60...Caterpillar Style O-Ring Flange 60 Bent Tube FLC67...Caterpillar Style O-Ring Flange 67.5 Bent Tube FLC90...Caterpillar Style O-Ring Flange 90 Bent Tube The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 3.3

66 Section 3 Permanent Couplings Contents... Description... Page GLOBAL-CRIMP GSH ONE PIECE COUPLINGS GSM-MP...Male Pipe NPTF 30 Cone Seat GSM-MJ...Male JIC 37 Flare GSM-FJX...Female JIC 37 Flare Swivel GSM-FJX45...Female JIC 37 Flare Swivel 45 Bent Tube GSM-FJX90...Female JIC 37 Flare Swivel 90 Bent Tube GSM-FBSPORX...Female BSPP Swivel GSM-FFORX...Female Flat Face Swivel (4000psi limited) GSM-FFORX45...Female Flat Face Swivel 45 Bent Tube (4000psi limited) GSM-FFORX90...Female Flat Face Swivel 90 Bent Tube (4000psi limited) GSM-FDHORX...Female DIN 24 Cone Swivel Heavy Series with O-Ring GSM-FDHORX45.Female DIN 24 Cone Swivel Heavy Series with O-Ring 45 Bent Tube GSM-FDHORX90.Female DIN 24 Cone Swivel Heavy Series with O-Ring 90 Bent Tube GSM-FL...Code 61 O-Ring Flange GSM-FL30...Code 61 O-Ring Flange 30 Bent Tube GSM-FL45...Code 61 O-Ring Flange 45 Bent Tube GSM-FL60...Code 61 O-Ring Flange 60 Bent Tube GSM-FL90...Code 61 O-Ring Flange 90 Bent Tube GSM-FLH...Code 62 O-Ring Flange Heavy GSM-FLH22...Code 62 O-Ring Flange Heavy 22.5 Bent Tube GSM-FLH30...Code 62 O-Ring Flange Heavy 30 Bent Tube GSM-FLH45...Code 62 O-Ring Flange Heavy 45 Bent Tube GSM-FLH60...Code 62 O-Ring Flange Heavy 60 Bent Tube GSM-FLH90...Code 62 O-Ring Flange Heavy 90 Bent Tube GSM-FLC...Caterpillar Style O-Ring Flange GSM-FLC22...Caterpillar Style O-Ring Flange 22.5 Bent Tube GSM-FLC30...Caterpillar Style O-Ring Flange 30 Bent Tube GSM-FLC45...Caterpillar Style O-Ring Flange 45 Bent Tube GSM-FLC60...Caterpillar Style O-Ring Flange 60 Bent Tube GSM-FLC90...Caterpillar Style O-Ring Flange 90 Bent Tube The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.

67 Section 3 Permanent Couplings Contents... Description...Page MAXI-CRIMP PCM TWO PIECE COUPLINGS PCM...Ferrule PCM (Skiving Required) MP...Male Pipe NPTF 30 Cone Seat MJ...Male JIC 37 Flare FJX...Female JIC 37 Flare Swivel FJX90...Female JIC 37 Flare Swivel 90 Bent Tube FFORX...Female Flat Face Swivel FFORX90...Female Flat Face Swivel 90 Bent Tube FL...Code 61 O-Ring Flange FL30...Code 61 O-Ring Flange 30 Bent Tube FL45...Code 61 O-Ring Flange 45 Bent Tube FL60...Code 61 O-Ring Flange 60 Bent Tube FL90...Code 61 O-Ring Flange 90 Bent Tube FLH...Code 62 O-Ring Flange Heavy FLH22...Code 62 O-Ring Flange Heavy 22.5 Bent Tube FLH30...Code 62 O-Ring Flange Heavy 30 Bent Tube FLH45...Code 62 O-Ring Flange Heavy 45 Bent Tube FLH60...Code 62 O-Ring Flange Heavy 60 Bent Tube FLH90...Code 62 O-Ring Flange Heavy 90 Bent Tube FLC...Caterpillar Style O-Ring Flange FLC22...Caterpillar Style O-Ring Flange 22.5 Bent Tube FLC30...Caterpillar Style O-Ring Flange 30 Bent Tube FLC45...Caterpillar Style O-Ring Flange 45 Bent Tube FLC60...Caterpillar Style O-Ring Flange 60 Bent Tube FLC90...Caterpillar Style O-Ring Flange 90 Bent Tube VACU-CRIMP GL ONE PIECE COUPLINGS FL...Code 61 O-Ring Flange FL22...Code 61 O-Ring Flange 22.5 Bent Tube FL30...Code 61 O-Ring Flange 30 Bent Tube FL45...Code 61 O-Ring Flange 45 Bent Tube FL60...Code 61 O-Ring Flange 60 Bent Tube FL67...Code 61 O-Ring Flange 67.5 Bent Tube FL90...Code 61 O-Ring Flange 90 Bent Tube The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 3.5

68 Section 3 Permanent Couplings Contents... Description... Page THIS PAGE INTENTIONALLY LEFT (MOSTLY) BLANK 3.6 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.

69 Section 3 Super-Crimp Couplings - Two Piece Super-Crimp Ferrule Non Skive Suits G2, G2H, G2XH, J2AT, G1,C5C, C5E, GMV Super-Crimp Ferrule Skive & Non Skive Hose Suits C5C, C5E, GMV, C3H & TH7 Super-Crimp Ferrule Non Skive Suits C12M, C12, C12-MTF & EFG4K P/Number Hose FNP /16 FNP /4 FNP /16 FNP /8 FNP /2 FNP /8 FNP /4 FNP FNP /4 FNP /2 FNP Super-Crimp Ferrule Non Skive Suits M3K, M3K-XTF & M3K-MTF P/Number......Hose FSP /4 * FSP /16 FSP-206A /8 FSP /8 FSP /2 FSP /8 FSP /4 FSP FSP /4 FSP /2 FSP Super-Crimp Ferrule Non Skive Suits M2T & M2T-MTF P/Number......Hose FNS /8 FNS /2 FNS /16 FNS /4 FNS FNS /4 FNS /2 FNS Super-Crimp Ferrule Skive Suits C12M, C12 & C12-MTF P/Number Hose FN3P /4 FN3P /8 FN3P /2 FNP /8 FNP /4 FNS Super-Crimp Ferrule Non Skive Suits M4K P/Number......Hose FNP-03 (suits 1/4" bore)...1/4 FNM2P /8 FNM2P /2 FNM2P /8 FNM2P /4 FNM2P Super-Crimp Ferrule Non Skive Suits AFX2000 Series Teflon Hose P/Number......Hose FNT /4 FNT /8 FNT /2 FNT /8 FNT /4 FNT P/Number......Hose FSS /8 FSS /2 FSS /4 FSS FSS /4 FSS /2 FSS P/Number Hose FN4P /4 FN4P /8 FNP /2 FNS /4 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.7

70 Section 3 Super-Crimp Couplings - Two Piece Straight Male BSPT Straight Female BSPP Swivel 90 Tube Female BSPP Swivel P/Number... Thread...Hose SMB /8...1/4 SMB /4...1/4 SMB /4...3/8 SMB /8...1/4 SMB /8...3/8 SMB /8...1/2 SMB /2...3/8 SMB /2...1/2 SMB /8...5/8 SMB /4...1/2 SMB /4...5/8 SMB /4...3/4 SMB /4 SMB SMB / /4 SMB / /2 SMB Straight Male BSPT Swivel P/Number...Thread... Hose SFB /8... 1/4 SFB /4... 1/4 SFB /4... 3/8 SFB /8... 1/4 SFB /8... 3/8 SFB /8... 1/2 SFB /2... 3/8 SFB /2... 1/2 SFB /8... 5/8 SFB /4... 1/2 SFB /4... 3/4 SFB /4 SFB SFB /4 SFB / SFB / /4 SFB / /2 SFB Tube Female BSPP Swivel P/Number...Thread...Hose SFB /4... 1/4 SFB /8... 1/4 SFB /8... 3/8 SFB /2... 3/8 SFB /2... 1/2 SFB /8... 5/8 SFB /4... 3/4 SFB SFB / /4 SFB / /2 SFB Close Female BSPP Swivel P/Number... Thread...Hose SMBX /4...1/4 SMBX /8...1/4 SMBX /8...3/8 SMBX /2...3/8 SMBX /2...1/2 90 Close Male BSPT Swivel P/Number...Thread... Hose SFB /4... 1/4 SFB /8... 3/8 SFB /2... 3/8 SFB /2... 1/2 SFB /8... 5/8 SFB /4... 3/4 SFB SFB / /4 SFB / /2 SFB P/Number...Thread...Hose SFB90C /4... 1/4 SFB90C /8... 3/8 SFB90C /2... 1/2 SFB90C /4... 3/4 SFB90C Straight Female BSPP Swivel Flat Seat P/Number... Thread...Hose * SMBX90C /8...3/8 SMBX90C /2...3/8 SMBX90C /2...1/2 P/Number...Thread...Hose SFBZ /8... 3/8 SFBZ /2... 3/8 SFBZ /2... 1/2 * SFBZ /4... 3/4 3.8 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

71 Section 3 Super-Crimp Couplings - Two Piece Straight Male JIC 45 Tube Female JIC Swivel 90 Tube Female JIC Swivel P/Number...Thread... Hose SMJ / /4 SMJ /2... 1/4 SMJ / /4 SMJ / /8 SMJ /4... 3/8 SMJ /4... 1/2 SMJ /8... 1/2 SMJ /8... 5/8 SMJ / /2 SMJ / /8 SMJ / /4 SMJ / /4 SMJ / SMJ / SMJ / /4 SMJ / /2 * SMJ / Straight Female JIC Swivel P/Number...Thread...Hose SFJ /16...1/4 SFJ /2...1/4 SFJ /16...1/4 SFJ /16...3/8 SFJ /4...3/8 SFJ /4...1/2 SFJ /8...1/2 SFJ /8...5/8 SFJ /8...3/4 SFJ /16...5/8 SFJ /16...3/4 SFJ /16...3/4 SFJ /16...3/4 SFJ / SFJ / /4 SFJ / /2 SFJ / Close Female JIC Swivel P/Number... Thread...Hose SFJ /16...1/4 SFJ /2...1/4 SFJ /16...1/4 SFJ /16...3/8 SFJ /4...3/8 SFJ /4...1/2 SFJ /8...3/8 SFJ /8...1/2 SFJ /8...5/8 SFJ /8...3/4 SFJ /16...1/2 SFJ /16...5/8 SFJ /16...3/4 SFJ /16...3/4 SFJ /16...3/4 SFJ / SFJ / /4 SFJ / /2 SFJ / Tube Female JIC Long Swivel P/Number...Thread... Hose PFJ / /16 SFJ / /4 SFJ /2... 1/4 SFJ / /4 PFJ / /16 SFJ / /8 SFJ / /2 * SFJ /4... 1/4 SFJ /4... 3/8 SFJ /4... 1/2 SFJ /4... 5/8 SFJ /8... 3/8 SFJ /8... 1/2 SFJ /8... 5/8 SFJ /8... 3/4 SFJ / /2 SFJ / /8 SFJ / /4 SFJ / SFJ / /4 SFJ / /4 SFJ / SFJ / /4 SFJ / SFJ / /4 SFJ / /2 SFJ / P/Number...Thread...Hose SFJ45C /16...1/4 SFJ45C /16...1/4 SFJ45C /8...1/2 SFJ45C /16...3/4 P/Number... Thread...Hose SFJ90L /16...1/4 SFJ90L /16...1/4 SFJ90L /16...3/8 SFJ90L /4...3/8 SFJ90L /4...1/2 SFJ90L /8...1/2 SFJ90L /16...3/4 SFJ90L / For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.9

72 Section 3 Super-Crimp Couplings - Two Piece 90 Close Female JIC Swivel 45 Tube Female Flat Faced O-Ring (ORFS) Swivel Straight Female BSPP Japanese JIS B Cone Swivel P/Number... Thread...Hose SFJ90C /16...1/4 SFJ90C /16...1/4 SFJ90C /16...3/8 SFJ90C /4...3/8 SFJ90C /4...1/2 SFJ90C /8...1/2 SFJ90C /16...3/4 SFJ90C / Straight Male Flat Faced O-Ring (ORFS) P/Number...Thread... Hose SFFO / /4 SFFO / /4 SFFO / /8 SFFO / /8 SFFO / /2 SFFO /2 SFFO /8 SFFO / /8 SFFO / /4 SFFO / SFFO / /4 SFFO /2 90 Tube Female Flat Faced O-Ring (ORFS) Short Drop Swivel P/Number...Thread...Hose SFNP /4... 1/4 SFNP /8... 3/8 SFNP /2... 3/8 SFNP /2... 1/2 SFNP /4... 3/4 SFNP SFNP / /4 Straight Female Metric Japanese JIS B Cone Swivel Komatsu P/Number... Thread...Hose SMORF /16...1/4 SMORF /16...3/8 SMORF /16...3/8 SMORF /16...1/2 SMORF /2 SMORF /8 SMORF /16...5/8 SMORF /16...3/4 SMORF /16...3/4 SMORF / Straight Female Flat Faced O-Ring (ORFS) Swivel P/Number... Thread...Hose SFFO /16...1/4 SFFO /16...1/4 SFFO /16...3/8 SFFO /16...3/8 SFFO /16...1/2 SFFO /2 SFFO /8 SFFO /16...3/4 SFFO /16...3/4 SFFO / SFFO / /4 SFFO /2 P/Number...Thread... Hose SFFO90S / /4 SFFO90S / /4 SFFO90S / /8 SFFO90S / /8 SFFO90S / /2 SFFO90S /2 SFFO90S /8 SFFO90S / /8 SFFO90S / /4 SFFO90S / /4 SFFO90S / SFFO90S / /4 SFFO90S /2 90 Tube Female Flat Faced O-Ring (ORFS) Long Drop Swivel P/Number...Thread... Hose SFFO90L / /4 SFFO90L / /8 SFFO90L / /2 SFFO90L / /4 SFFO90L / P/Number... Thread...Hose SFK M14 x /4 SFK M18 x /8 SFK M20 x /8 SFK M22 x /2 SFK M24 x /8 SFK M30 x /4 SFK M33 x Female Metric Japanese JIS B Cone Swivel Komatsu P/Number... Thread...Hose SFK M14 x /4 SFK M18 x /8 SFK M22 x /2 SFK M24 x /8 SFK M30 x /4 SFK M33 x For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

73 Section 3 Super-Crimp Couplings - Two Piece 90 Female Metric Japanese JIS B Cone Swivel Komatsu Fixed Female NPTF Straight Male S.A.E. O-Ring Boss (Swivel) P/Number...Thread... Hose SFK M14 x /4 SFK M18 x /8 SFK M22 x /2 SFK M24 x /8 SFK M30 x /4 SFK M33 x Straight Male NPTF P/Number...Thread... Hose SMN /8... 1/4 SMN /4... 1/4 SMN /4... 3/8 SMN /8... 1/4 SMN /8... 3/8 SMN /8... 1/2 SMN /2... 3/8 SMN /2... 1/2 SMN /4... 1/2 SMN /4... 3/4 SMN SMN / /4 SMN / /2 SMN Straight Male NPTF Long Series Porta-Power (superseded by EMNL-0604 p3.17) P/Number...Thread...Hose SFNF /4...1/4 * SFNF /8...3/8 Hose Joiner P/Number......Hose SHJ /4 SHJ /8 SHJ /2 SHJ /4 Lifesaver Hose Ends P/Number...Thread...Hose SLS /4...1/4 SLS /8...1/4 SLS /8...3/8 SLS-10M06Z...5/8...3/8 SLS /2...3/8 SLS /2...1/2 SLS /8...1/2 SLS /8...5/8 SLS /8...3/4 SLS /4...3/4 SLS /4 SLS SLS / /4 SLS / /2 P/Number... Thread...Hose SMOX /16...1/4 SMOX /2...3/8 SMOX /16...3/8 SMOX /4...1/4 SMOX /4...3/8 SMOX /4...1/2 SMOX /8...1/2 90 Duro O Ring supplied 90 Close Male Swivel S.A.E. O-Ring Boss P/Number... Thread...Hose SMOX90C /4...3/8 SMOX90C /4...1/2 SMOX90C /8...1/2 90 Duro O Ring supplied Straight Female S.A.E Swivel P/Number... Thread...Hose SFS /2...1/4 SFS /8...3/8 SFS /4...3/8 90 Female S.A.E Swivel P/Number...Thread... Hose SMNL /8... 1/4 P/Number... Thread...Hose SFS /8...3/8 SFS /4...3/8 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.11

74 Section 3 Super-Crimp Couplings - Two Piece Straight Male SAE Inverted Flare Straight Female Swivel DIN Heavy O-Ring 90 Female Swivel DIN Heavy O-Ring P/Number... Thread...Hose SMIX /16...1/4 SMIX /2...1/4 SMIX /8...3/8 45 Tube Male SAE Inverted Flare P/Number... Thread...Hose * SMIX /16...1/4 * SMIX /2...1/4 SMIX /8...3/8 90 Tube Male SAE Inverted Flare P/Number... Thread...Hose SMIX /16...1/4 SMIX /2...1/4 SMIX /8...3/8 P/Number...Thread... Hose SFDKO M14 x /4 SFDKO M16 x /4 SFDKO M18 x /4 SFDKO M18 x /8 SFDKO M20 x /8 SFDKO M22 x /8 SFDKO M22 x /2 SFDKO M24 x /2 SFDKO M30 x /8 SFDKO M30 x /4 SFDKO M36 x /4 SFDKO M36 x SFDKO M42 x SFDKO M52 x /4 SFDKO M52 x /2 45 Female Swivel DIN Heavy O-Ring P/Number...Thread... Hose SFDKO M14 x /4 SFDKO M16 x /4 SFDKO M18 x /4 SFDKO M18 x /8 SFDKO M20 x /8 SFDKO M20 x /2 SFDKO M24 x /2 SFDKO M30 x /8 SFDKO M30 x /4 SFDKO M36 x /4 SFDKO M52 x /4 P/Number... Thread...Hose SFDKO M14 x /4 SFDKO M16 x /4 SFDKO M18 x /4 SFDKO M18 x /8 SFDKO M20 x /8 SFDKO M22 x /8 SFDKO M22 x /2 SFDKO M24 x /2 SFDKO M30 x /8 SFDKO M30 x /4 SFDKO M36 x /4 SFDKO M52 x /4 Straight Male DIN Heavy Series P/Number... Thread...Hose SMDKS M14 x /4 SMDKS M16 x /4 SMDKS M18 x /4 SMDKS M20 x /8 SMDKS M22 x /8 SMDKS M24 x /2 SMDKS M30 x /8 SMDKS M30 x /4 SMDKS M36 x /4 SMDKS M36 x SMDKS M42 x SMDKS M52 x / For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

75 Section 3 Super-Crimp Couplings - Two Piece Straight Female Swivel DIN Light Series Universal Cone Seat 24 /60 Cone 90 Female Swivel DIN Light Series Universal Cone Seat 24 /60 Cone FRENCH GAZ Straight Male P/Number...Thread... Hose SFDKL M12 x /4 SFDKL M14 x /4 SFDKL M16 x /4 SFDKL M16 x /8 SFDKL M16 x /2 SFDKL M18 x /8 SFDKL M18 x /2 SFDKL M22 x /8 SFDKL M22 x /2 SFDKL M22 x /8 SFDKL M26 x /2 SFDKL M26 x /8 SFDKL M26 x /4 SFDKL M30 x /4 SFDKL M36 x SFDKL M45 x /4 SFDKL M52 x /2 45 Female Swivel DIN Light Series Universal Cone Seat 24 /60 Cone P/Number...Thread... Hose SFDKL M12 x /4 SFDKL M14 x /4 SFDKL M16 x /4 SFDKL M16 x /8 SFDKL M18 x /8 SFDKL M18 x /2 SFDKL M22 x /2 SFDKL M26 x /2 SFDKL M26 x /8 SFDKL M30 x /4 P/Number... Thread...Hose SFDKL M12 x /4 SFDKL M14 x /4 SFDKL M16 x /4 SFDKL M16 x /8 SFDKL M18 x /8 SFDKL M22 x /2 SFDKL M26 x /2 SFDKL M26 x /8 SFDKL M30 x /4 SFDKL M36 x SFDKL M45 x /4 Straight Male DIN Light Series P/Number... Thread...Hose SMDKL M12 x /4 SMDKL M14 x /4 SMDKL M14 x /8 SMDKL M16 x /4 SMDKL M16 x /8 SMDKL M18 x /4 SMDKL M18 x /8 SMDKL M18 x /2 SMDKL M22 x /8 SMDKL M22 x /2 SMDKL M26 x /2 SMDKL M26 x /8 SMDKL M30 x /4 SMDKL M36 x P/Number... Thread...Hose SMGAZ M30...3/4 SMGAZ M36...3/4 SMGAZ M SMGAZ M FRENCH GAZ Straight Female P/Number... Thread...Hose SFGAZ M30...5/8 SFGAZ M30...3/4 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.13

76 Section 3 Super- & Hammer-Crimp Couplings Straight Male Staplelock System Hammer-Crimp Ferrule Non-Skive Suits EFG4K P/Number... StapleHose1/41/4 SSS /8...1/4 SSS /8...3/8 SSS /2...1/2 90 Duro O Ring & Anti-extrusion Washer supplied P/Number......Hose FNH FNH /4 Straight Female BSPP Hammer Coupling P/Number...Thread...Hose HFB HFB / /4 The HAMMER COUPLING is especially designed to withstand very heavy and continuous pressure spikes such as is experienced in hammer systems 3.14 *Manufactured To Order - Minimum Order Quantities May Apply

77 Section 3 Super-Crimp Couplings - Two Piece Straight SAE O-Ring Flange Code SAE Flange Code SAE O-Ring Flange Code 61 P/Number...Flange... Hose SFL /2... 1/2 SFL /4... 1/2 SFL /4... 3/4 SFL /4 SFL SFL /4... 3/4 SFL / SFL / /4 SFL / SFL / /4 SFL / /2 SFL /2 SFL SFL / Duro O Ring supplied Straight Komatsu O-Ring Flange P/Number...Flange...Hose * SFL /2...1/2 SFL /4...1/2 SFL /4...3/4 SFL /4 SFL SFL / SFL / /4 SFL / /4 SFL / /2 SFL /2 SFL Duro O Ring supplied 45 SAE Flange Code 61 P/Number... Flange...Hose SFL /2...1/2 SFL /4...1/2 SFL /4...3/4 SFL /4 SFL SFL /4...1 SFL / /4 SFL / /4 SFL / /2 SFL /2 SFL Duro O Ring supplied 67 SAE O-Ring Flange Code 61 P/Number...Flange... Hose SFLK /8...1/25/85/8 SFLK /8... 3/4 90 Duro O Ring supplied 22-1/2 SAE O-Ring Flange Code 61 P/Number...Flange... Hose SFL /2... 1/2 SFL /4... 1/2 SFL /4... 3/4 SFL /4 SFL SFL / SFL / /4 SFL / /4 SFL / /2 SFL /2 SFL Duro O Ring supplied P/Number...Flange...Hose SFL /2...1/2 SFL /4...1/2 SFL /4...3/4 SFL /4 SFL SFL / SFL /41-1/41-1/21 SFL / /4 SFL / /2 SFL / SFL /2 SFL SFL / Duro O Ring supplied 45 Komatsu O-Ring Flange P/Number...Flange...Hose SFLK /8...1/2 SFLK /8...3/4 P/Number... Flange...Hose SFL /2...1/2 SFL /4...1/2 SFL /4...3/4 SFL /4 * SFL SFL /4...1 SFL / /4 SFL / /4 SFL / /2 SFL /2 SFL Duro O Ring supplied For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.15

78 Section 3 Super-Crimp Couplings - Two Piece 90 SAE Flange Code SAE Flange Code SAE Flange Code 62 P/Number... Flange...Hose SFL /2...1/2 SFL /4...1/2 SFL /4...3/4 SFL /4 SFL SFL /4 SFL /4...3/4 SFL /4...1 SFL / /4 SFL / /2 SFL /2...1 SFL / /4 SFL / /2 SFL /2 SFL SFL / Duro O Ring supplied 90 Komatsu O-Ring Flange P/Number...Flange... Hose SFL /4... 3/4 SFL SFL / SFL / /4 SFL / /4 SFL / /2 SFL Duro O Ring supplied 135 SAE Flange Code 61 P/Number...Flange...Hose SFLH /2... 1/2 SFLH /4... 3/4 SFLH /4 SFLH SFLH / SFLH / /4 SFLH / /2 SFLH / /4 SFLH / /2 SFLH /2 SFLH Duro O Ring supplied 90 SAE Flange Code 62 P/Number... Flange...Hose SFLK /8...1/2 SFLK /8...3/4 90 SAE Flange Long Drop Code 61 P/Number... Flange...Hose SFL90L-1212/ /4...3/4 SFL90L-1616/ SFL90L-2016/ /4...1 SFL90L-2020/ / /4 SFL90L-2020/ / /4 SFL90L-2420/ / /4 SFL90L-2424/ / /2 SFL90L-3232/ Duro O Ring supplied P/Number...Flange... Hose SFL /4... 3/4 SFL SFL Duro O Ring supplied Straight SAE Flange Code 62 P/Number...Flange... Hose SFLH /2... 1/2 SFLH /4... 3/4 SFLH /4 SFLH SFLH / SFLH / /4 SFLH / /2 SFLH /2 SFLH Duro O Ring supplied P/Number...Flange...Hose SFLH /2... 1/2 SFLH /4... 3/4 SFLH SFLH /4 SFLH SFLH /4 SFLH / SFLH / /4 SFLH / /2 SFLH / /4 SFLH / /2 SFLH /2 SFLH Duro O Ring supplied 3.16 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

79 Section 3 Ezi-Crimp Couplings - One Piece Straight Male BSPT 90 Tube Female BSPP Swivel Straight Female JIC Swivel P/Number...Thread... Hose EMB /8... 1/4 EMB /4... 1/4 EMB /4... 3/8 EMB /8... 1/4 EMB /8... 3/8 EMB /2... 3/8 EMB /2... 1/2 EMB /4... 5/8 Straight Male BSPP Encapsulated Seal Included in the price P/Number...Thread... Hose EMR /8... 1/4 EMR /8... 3/8 EMR /2... 3/8 EMR /2... 1/2 Straight Female BSPP Swivel P/Number...Thread... Hose EFB-0204H...1/8... 1/4 EFB-0404H...1/4... 1/4 EFB-0604H...3/8... 1/4 EFB-0606H...3/8... 3/8 EFB-0806H...1/2... 3/8 EFB-0808H...1/2... 1/2 EFB-1008H...5/8... 1/2 EFB /4... 5/8 EFB-1212H...3/4... 3/4 P/Number...Thread...Hose EFB /4...1/4 EFB /8...3/8 EFB /2...1/2 EFB /4...5/8 EFB /4...3/4 90 Close Female BSPP Swivel P/Number...Thread...Hose EFB90C /4...1/4 EFB90C /8...1/4 EFB90C /8...3/8 EFB90C /2...1/2 EFB90C /4...3/4 Straight Male NPT Suit Porta-Power Hoses P/Number...Thread...Hose EMNL /8...1/4 Straight Male JIC P/Number...Thread...Hose EMJ /16...1/4 EMJ /16...1/4 EMJ /16...3/8 EMJ /4...1/4 EMJ /4...3/8 EMJ /4...1/2 EMJ /8...1/2 EMJ /8...5/8 EMJ /16...1/2 EMJ /16...5/8 P/Number... Thread...Hose EFJ-0704H... 7/16...1/4 EFJ-0804H... 1/2...1/4 EFJ-0904H... 9/16...1/4 EFJ-0906H... 9/16...3/8 EFJ-0908H... 9/16...1/2 EFJ-1206H... 3/4...3/8 EFJ-1208H... 3/4...1/2 EFJ-1406H... 7/8...3/8 EFJ-1408H... 7/8...1/2 EFJ-1410H... 7/8...5/8 EFJ-1412H... 7/8...3/4 EFJ-1708H /16...1/2 EFJ-1710H /16...5/8 EFJ-1712H /16...3/4 EFJ-2112H /16...3/4 45 Tube Female JIC Swivel P/Number... Thread...Hose EFJ /16...1/4 EFJ /16...1/4 EFJ /16...3/8 EFJ /4...3/8 EFJ /4...1/2 EFJ /8...1/2 EFJ /8...5/8 EFJ /16...5/8 EFJ /16...3/4 90 Tube Female JIC Swivel P/Number... Thread...Hose EFJ /16...1/4 EFJ /2...1/4 EFJ /16...1/4 EFJ /16...3/8 EFJ /16...1/2 EFJ /4...3/8 EFJ /4...1/2 EFJ /8...3/8 EFJ /8...1/2 EFJ /8...5/8 EFJ /16...5/8 EFJ /16...3/4 EFJ /16...3/4 *Manufactured To Order - Minimum Order Quantities May Apply 3.17

80 Section 3 Ezi-Crimp Couplings - One Piece 90 Tube Female JIC Long Drop Swivel 45 Tube Female Flat Faced O-Ring (ORFS) Swivel P/Number... Thread...Hose EFJ90L /16...1/4 EFJ90L /16...1/4 EFJ90L /4...3/8 EFJ90L /4...1/2 EFJ90L /8...1/2 EFJ90L-1408Z... 7/8...1/2 EFJ90L /85/8 P/Number...Thread... Hose EFFO / /4 90 Tube Female Flat Faced O-Ring (ORFS) Swivel 90 Close Female JIC Swivel P/Number...Thread... Hose EFFO90S / /4 EFFO90S / /4 EFFO90S / /8 EFFO90S / /2 P/Number... Thread...Hose EFJ90C /16...1/4 EFJ90C /16...1/4 EFJ90C /16...3/8 EFJ90C /4...3/8 EFJ90C /4...1/2 EFJ90C /8...1/2 EFJ90C /16...3/4 Straight Female Flat Faced O-Ring (ORFS) Swivel P/Number... Thread...Hose EFFO /16...1/4 EFFO /16...1/4 EFFO /16...3/8 EFFO /16...1/ *Manufactured To Order - Minimum Order Quantities May Apply

81 Section 3 Global-Crimp GS & GSP Couplings - Two Piece Global Spiral Ferrules (Non-Skive) C12M, C12M-MTF, EFG4K, G5K, G6K Male British Standard Pipe Parallel Female British Standard Pipe Parallel O-Ring Swivel 90 Bent Tube P/Number Hose 6GS1F /8 8GS1F /2 10GS1F /8 12GS1F /4 16GS1F GS1F /4 20GS1F /4 24GS1F /2 24GSP1F /2 24GSP1F /2 32GSP1F GSP1F P/Number...Thread...Hose 6GS-6MBSPP...3/8...3/8 6GS-8MBSPP...1/2...3/8 8GS-8MBSPP...1/2...1/2 10GS-10MBSPP...5/8...5/8 10GS-12MBSPP...3/4...5/8 12GS-12MBSPP...3/4...3/4 16GS-16MBSPP GS-20MBSPP...1-1/ /4 Female British Standard Pipe Parallel O-Ring Swivel P/Number... Thread...Hose 6GS-6FBSPORX /8...3/8 8GS-8FBSPORX /2...1/2 10GS-10FBSPORX90. 5/8...5/8 10GS-12FBSPORX90. 3/4...5/8 12GS-12FBSPORX90. 3/4...3/4 16GS-16FBSPORX GS-20FBSPORX / /4 24GSP-24FBSPORX901-1/ /2 32GSP-32FBSPORX Male JIC 37 Flare Male O-Ring Boss P/Number...Thread... Hose 6GS-6MB...9/ /8 8GS-8MB...3/4... 1/2 8GS-10MB...7/8... 1/2 10GS-10MB...7/8... 5/8 10GS-12MB...1-1/ /8 12GS-12MB...1-1/ /4 12GS-16MB...1-5/ /4 16GS-16MB...1-5/ Male Pipe NPTF 30 Cone Seat P/Number...Thread...Hose 6GS-6FBSPORX...3/8...3/8 6GS-8FBSPORX...1/2...3/8 8GS-8FBSPORX...1/2...1/2 8GS-10FBSPORX...5/8...1/2 10GS-10FBSPORX...5/8...5/8 10GS-12FBSPORX...3/4...5/8 12GS-12FBSPORX...3/4...3/4 16GS-16FBSPORX GS-20FBSPORX...1-1/ /4 24GSP-24FBSPORX..1-1/ /2 32GSP-32FBSPORX Female British Standard Pipe Parallel O-Ring Swivel 45 Bent Tube P/Number... Thread...Hose 6GS-6MJ... 9/16...3/8 6GS-8MJ... 3/4...3/8 6GS-10MJ... 7/8...3/8 8GS-8MJ... 3/4...1/2 8GS-10MJ... 7/8...1/2 10GS-10MJ... 7/8...5/8 10GS-12MJ /16...5/8 12GS-12MJ /16...3/4 12GS-14MJ /16...3/4 12GS-16MJ /16...3/4 16GS-16MJ / GS-20MJ / GS-20MJ / /4 24GSP-20MJ / /2 24GSP-24MJ / /8 32GSP-32MJ /2...2 P/Number...Thread... Hose 6GS-6MP...3/8... 3/8 6GS-8MP...1/2... 3/8 8GS-8MP...1/2... 1/2 8GS-12MP...3/4... 1/2 10GS-8MP...1/2... 5/8 10GS-12MP...3/4... 5/8 12GS-12MP...3/4... 3/4 12GS-16MP /4 16GS-12MP...3/ GS-16MP GS-20MP...1-1/ GS-20MP...1-1/ /4 24GSP-24MP...1-1/ /2 32GSP-32MP P/Number...Thread...Hose 6GS-6FBSPORX45...3/8...3/8 8GS-8FBSPORX45...1/2...1/2 10GS-10FBSPORX45...5/8...5/8 10GS-12FBSPORX45...3/4...5/8 12GS-12FBSPORX45...3/4...3/4 16GS-16FBSPORX GS-20FBSPORX / /4 24GSP-24FBSPORX45.1-1/ /2 32GSP-32FBSPORX *Supply To Order - Minimum Order Quantities May Apply 3.19

82 Section 3 Global-Crimp GS & GSP Couplings - Two Piece Female JIC 37 Flare Swivel Female JIC 37 Flare Swivel 90 Bent Tube Female Flat Face Swivel P/Number... Thread...Hose 6GS-6FJX... 9/16...3/8 6GS-8FJX... 3/4...3/8 8GS-8FJX... 3/4...1/2 8GS-10FJX... 7/8...1/2 8GS-12FJX /16...1/2 10GS-10FJX... 7/8...5/8 10GS-12FJX /16...5/8 12GS-10FJX... 7/8...3/4 12GS-12FJX /16...3/4 12GS-14FJX /16...3/4 12GS-16FJX /16...3/4 16GS-12FJX / GS-14FJX / GS-16FJX / GS-20FJX / GS-16FJX / /4 20GS-20FJX / /4 20GS-24FJX / /4 24GSP-24FJX / /2 24GSP-32FJX / /2 32GSP-32FJX /2...2 Female JIC 37 Flare Swivel 45 Bent Tube P/Number... Thread...Hose 6GS-6FJX45S... 9/16...3/8 6GS-8FJX45S... 3/4...3/8 8GS-8FJX45S... 3/4...1/2 8GS-10FJX45S... 7/8...1/2 10GS-10FJX45S... 7/8...5/8 10GS-12FJX45S /16...5/8 12GS-12FJX45S /16...3/4 12GS-16FJX45S /16...3/4 16GS-16FJX45S / GS-20FJX45S / GS-20FJX / /4 24GSP-24FJX / /2 P/Number...Thread... Hose 6GS-6FJX90S...9/ /8 6GS-6FJX90L...9/ /8 6GS-8FJX90M...3/4... 3/8 8GS-8FJX90S...3/4... 1/2 8GS-8FJX90M...3/4... 1/2 8GS-8FJX90L...3/4... 1/2 8GS-10FJX90S...7/8... 1/2 8GS-10FJX90M...7/8... 1/2 8GS-10FJX90L...7/8... 1/2 8GS-12FJX90S...1-1/ /2 10GS-10FJX90S...7/8... 5/8 10GS-12FJX90M...1-1/ /8 12GS-12FJX90S...1-1/ /4 12GS-12FJX90M...1-1/ /4 12GS-12FJX90L...1-1/ /4 12GS-14FJX / /4 12GS-16FJX90S...1-5/ /4 12GS-16FJX90M...1-5/ /4 16GS-16FJX90S...1-5/ GS-16FJX90M...1-5/ GS-16FJX90L...1-5/ GS-20FJX90L...1-5/ GS-20FJX90S...1-5/ /4 20GS-20FJX90M...1-5/ /4 20GS-20FJX90L...1-5/ /4 24GSP-24FJX / /2 24GSP-24FJX / /2 32GSP-32FJX90M...2-1/ Male Flat Face O-Ring P/Number...Thread... Hose 6GS-6MFFOR...11/ /8 8GS-8MFFOR...13/ /2 12GS-12MFFOR...1-3/ /4 12GS-16MFFOR...1-7/ /4 16GS-16MFFOR...1-7/ GS-20MFFOR / /4 P/Number...Thread...Hose 6GS-6FFORX...11/ /8 6GS-8FFORX...13/ /8 8GS-8FFORX...13/ /2 8GS-10FFORX /2 8GS-12FFORX...1-3/16...1/2 10GS-10FFORX /8 12GS-10FFORX /4 12GS-12FFORX...1-3/16...3/4 12GS-16FFORX...1-7/16...3/4 16GS-16FFORX...1-7/ GS-20FFORX / GS-20FFORX / /4 24GSP-24FFORX /2 Female Flat Face Swivel 45 Bent Tube P/Number...Thread...Hose 6GS-6FFORX45S...11/ /8 6GS-8FFORX45S...13/ /8 8GS-8FFORX45S...13/ /2 8GS-10FFORX45S /2 10GS-10FFORX45S /8 12GS-12FFORX45S..1-3/16...3/4 12GS-16FFORX45S..1-7/16...3/4 16GS-16FFORX45S..1-7/ GS-20FFORX45S..1-11/ GS-20FFORX45S..1-11/ /4 24GSP-24FFORX / *Supply To Order - Minimum Order Quantities May Apply

83 Section 3 Global-Crimp GS & GSP Couplings - Two Piece Female Flat Face Swivel 90 Bent Tube Female DIN 24 Cone Swivel Heavy Series With O-Ring Female DIN 24 Cone Swivel Heavy Series With O-Ring 90 Bent Tube P/Number...Thread... Hose 6GS-6FFORX90S...11/ /8 6GS-6FFORX90L...11/ /8 6GS-8FFORX90M...13/ /8 8GS-8FFORX90S...13/ /2 8GS-8FFORX / /2 8GS-10FFORX90M /2 8GS-12FFORX90S...1-3/ /2 10GS-10FFORX90M /8 10GS-10FFORX90L /8 12GS-10FFORX90S /4 12GS-12FFORX90S..1-3/ /4 12GS-12FFORX90M.1-3/ /4 12GS-12FFORX90L..1-3/ /4 12GS-16FFORX90S..1-7/ /4 12GS-16FFORX90L..1-7/ /4 16GS-16FFORX90S..1-7/ GS-16FFORX90M.1-7/ GS-16FFORX90L..1-7/ GS-20FFORX90M.1-11/ GS-20FFORX90S..1-11/ /4 20GS-20FFORX90M. 1-11/ /4 20GS-20FFORX90L..1-11/ /4 24GSP-24FFORX90M /2 24GSP-24FFORX90L /2 Male 24 Cone - Heavy Series P/Number...Thread... Hose 6GS-12MDH...M20 x /8 6GS-14MDH...M22 x /8 8GS-16MDH...M24 x /2 10GS-20MDH...M30 x /8 12GS-20MDH...M30 x /4 12GS-25MDH...M36 x /4 12GS-30MDH...M42 x /4 16GS-25MDH...M36 x GS-30MDH...M42 x GS-38MDH...M52 x /4 P/Number...Thread...Hose 6GS-12FDHORX...M20 x /8 6GS-14FDHORX...M22 x /8 8GS-14FDHORX...M22 x /2 8GS-16FDHORX...M24 x /2 8GS-20FDHORX...M30 x /2 10GS-20FDHORX...M30 x /8 10GS-25FDHORX...M36 x /8 12GS-20FDHORX...M30 x /4 12GS-25FDHORX...M36 x /4 16GS-25FDHORX...M36 x GS-30FDHORX...M42 x GS-38FDHORX...M52 x /4 24GS-38FDHORX...M52 x /2 Female DIN 24 Cone Swivel Heavy Series With O-Ring 45 Bent Tube P/Number...Thread...Hose 6GS-12FDHORX45...M20 x /8 6GS-14FDHORX45...M22 x /8 8GS-16FDHORX45...M24 x /2 10GS-20FDHORX45.M30 x /8 12GS-20FDHORX45.M30 x /4 12GS-25FDHORX45.M36 x /4 16GS-25FDHORX45.M36 x GS-30FDHORX45.M42 x GS-38FDHORX45.M52 x /4 P/Number...Thread...Hose 6GS-12FDHORX90...M20...3/8 6GS-14FDHORX90...M22...3/8 8GS-16FDHORX90M...M24...1/2 10GS-20FDHORX90M..M30...5/8 12GS-20FDHORX90M..M30...3/4 12GS-25FDHORX90M..M36...3/4 16GS-25FDHORX90M..M36...3/4 16GS-30FDHORX90M..M GS-38FDHORX90...M /4 *Supply To Order - Minimum Order Quantities May Apply 3.21

84 Section 3 Global-Crimp GS & GSP Couplings - Two Piece Code 61 O-Ring Flange Code 61 O-Ring Flange 45 Bent Tube Code 61 O-Ring Flange 90 Bent Tube P/Number... Flange...Hose 6GS-8FL... 1/2...3/8 8GS-8FL... 1/2...1/2 8GS-12FL... 3/4...1/2 8GS-10FLK... 5/8...1/2 10GS-10FLK... 5/8...5/8 10GS-12FL... 3/4...5/8 12GS-8FL... 1/2...3/4 12GS-10FLK... 5/8...3/4 12GS-12FL... 3/4...3/4 12GS-16FL /4 12GS-20FL /4...3/4 16GS-16FL GS-20FL / GS-24FL / GS-16FL /4 20GS-20FL / /4 20GS-24FL / /4 24GSP-20FL / /2 24GSP-24FL / /2 24GSP-32FL /2 32GSP-24FL / GSP-32FL GSP-40FL /2...2 Code 61 O-Ring Flange 22.5 Bent Tube P/Number... Flange...Hose 8GS-8FL22M... 1/2...1/2 12GS-12FL22M... 3/4...3/4 12GS-16FL22M /4 16GS-16FL22M GS-20FL22M / GS-20FL22M / /4 20GS-24FL22M / /4 24GSP-24FL22M / /2 24GSP-32FL22M /2 32GSP-32FL22M Code 61 O-Ring Flange 30 Bent Tube P/Number...Flange... Hose 6GS-8FL45M...1/2... 3/8 8GS-8FL45M...1/2... 1/2 8GS-12FL45M...3/4... 1/2 10GS-10FLK /8... 5/8 10GS-12FL45M...3/4... 5/8 12GS-12FL45M...3/4... 3/4 12GS-16FL45S /4 16GS-16FL45M GS-20FL45M...1-1/ GS-16FL45M /4 20GS-20FL45S...1-1/ /4 20GS-24FL45S...1-1/ /4 24GSP-24FL45S...1-1/ /2 24GSP-32FL45S /2 32GSP-24FL45S...1-1/ GSP-32FL45\ Code 61 O-Ring Flange 60 Bent Tube P/Number...Flange... Hose 8GS-8FL60M...1/2... 1/2 12GS-12FL60M...3/4... 3/4 12GS-16FL60M /4 16GS-16FL60M GS-20FL60M...1-1/ GS-20FL60M...1-1/ /4 20GS-24FL60M...1-1/ /4 24GSP-24FL60S...1-1/ /2 24GSP-32FL60S /2 32GSP-32FL60S Code 61 O-Ring Flange 67.5 Bent Tube P/Number...Flange...Hose 6GS-8FL90M...1/2... 3/8 8GS-8FL90M...1/2... 1/2 8GS-8FL90L...1/2... 1/2 8GS-12FL90M...3/4... 1/2 10GS-10FLK /8... 5/8 10GS-12FL90M...3/4... 5/8 12GS-8FL /2... 3/4 12GS-10FLK /8... 3/4 12GS-12FL90M...3/4... 3/4 12GS-12FL /4... 3/4 12GS-12FL /4... 3/4 12GS-16FL90S /4 12GS-16FL90M /4 12GS-20FL /4...3/4 16GS-16FL90S GS-16FL90M GS-16FL GS-20FL90S...1-1/ GS-20FL90M...1-1/ GS-24FL90S...1-1/ GS-24FL / GS-16FL90M /4 20GS-20FL90S...1-1/ /4 20GS-20FL90M...1-1/ /4 20GS-20FL / /4 20GS-24FL90S...1-1/ /4 20GS-24FL / /4 24GSP-24FL90M...1-1/ /2 24GSP-32FL /2 24GSP-32FL /2 32GSP-24FL90S...1-1/ GSP-32FL GSP-32FL GSP-32FL GSP-40FL / Code 61 O-Ring Flange 110 Bent Tube P/Number... Flange...Hose 8GS-12FL30M... 3/4...1/2 12GS-12FL30M... 3/4...3/4 12GS-16FL30M /4 16GS-16FL30M GS-20FL30M / GS-20FL30M / /4 20GS-24FL30M / /4 24GSP-24FL30S / /2 24GSP-32FL30M /2 32GSP-32FL30M P/Number...Flange... Hose 12GS-12FL67M...3/4... 3/4 12GS-16FL67M /4 16GS-16FL67M GS-20FL67M...1-1/ GS-20FL67M...1-1/ /4 24GSP-24FL67S...1-1/ /2 24GSP-32FL67S /2 32GSP-32FL67S P/Number...Flange...Hose 12GS-12FL /4... 3/4 16GS-16FL GS-20FL / /4 20GS-24FL / /4 24GSP-24FL / /2 32GSP-32FL *Supply To Order - Minimum Order Quantities May Apply

85 Section 3 Global-Crimp GS & GSP Couplings - Two Piece Code 62 O-Ring Flange Heavy Code 62 O-Ring Flange Heavy 45 Bent Tube Code 62 O-Ring Flange Heavy 90 Bent Tube P/Number...Flange... Hose 8GS-8FLH...1/2... 1/2 8GS-12FLH...3/4... 1/2 10GS-8FLH...1/2... 5/8 12GS-12FLH...3/4... 3/4 12GS-16FLH /4 16GS-12FLH...3/ GS-16FLH GS-20FLH...1-1/ GS-16FLH /4 20GS-20FLH...1-1/ /4 20GS-24FLH...1-1/ /4 24GSP-24FLH...1-1/ /2 24GSP-32FLH /2 32GSP-32FLH Code 62 O-Ring Flange Heavy 22.5 Bent Tube P/Number...Flange... Hose 16GS-16FLH22M GS-20FLH22M...1-1/ /4 20GS-24FLH22M...1-1/ /4 Code 62 O-Ring Flange Heavy 30 Bent Tube P/number...Flange...Hose 8GS-8FLH45M...1/2...1/2 8GS-12FLH45M...3/4...1/2 10GS-12FLH45M...3/4...5/8 12GS-12FLH45M...3/4...3/4 12GS-16FLH45M /4 16GS-16FLH45M GS-20FLH45M...1-1/ GS-20FLH45M...1-1/ /4 20GS-24FLH45M...1-1/ /4 24GSP-24FLH45M...1-1/ /2 24GSP-32FLH45S /2 32GSP-32FLH Code 62 O-Ring Flange Heavy 60 Bent Tube P/Number...Flange...Hose 12GS-12FLH60M...3/4...3/4 12GS-16FLH60M /4 16GS-16FLH60M GS-20FLH60M...1-1/ /4 20GS-24FLH60M...1-1/ /4 P/Number... Flange...Hose 8GS-8FLH90M... 1/2...1/2 8GS-8FLH /2...1/2 8GS-12FLH90M... 3/4...1/2 10GS-8FLH90M... 1/2...5/8 10GS-12FLH90M... 3/4...5/8 12GS-12FLH90M... 3/4...3/4 12GS-16FLH90M /4 16GS-12FLH90M... 3/ GS-16FLH90S GS-16FLH90M GS-16FLH GS-20FLH90S / GS-20FLH90M / GS-24FLH90S / GS-16FLH90S /4 20GS-16FLH90M /4 20GS-16FLH /4 20GS-20FLH / /4 20GS-20FLH90M / /4 20GS-20FLH / /4 20GS-24FLH90S / /4 24GSP-24FLH / /2 24GSP-32FLH90S /2 32GSP-32FLH90M P/number...Flange... Hose 16GS-16FLH30M GS-20FLH30M...1-1/ /4 20GS-24FLH30M...1-1/ /4 *Supply To Order - Minimum Order Quantities May Apply 3.23

86 Section 3 Global-Crimp GS & GSP Couplings - Two Piece Caterpillar Style O-Ring Flange Caterpillar Style O-Ring Flange - 45 Bent Tube Caterpillar Style O-Ring Flange - 90 Bent Tube P/Number... Flange...Hose 12GS-12FLC... 3/4...3/4 12GS-16FLC /4 16GS-16FLC GS-20FLC / GS-20FLC / /4 20GS-24FLC / /4 Caterpillar Style O-Ring Flange Bent Tube P/Number...Flange... Hose 12GS-12FLC /4... 3/4 12GS-16FLC /4 16GS-16FLC GS-20FLC / GS-20FLC / /4 20GS-24FLC / /4 Caterpillar Style O-Ring Flange - 60 Bent Tube P/Number...Flange...Hose 12GS-12FLC /4... 3/4 12GS-12FLC /4... 3/4 12GS-16FLC /4 16GS-16FLC GS-16FLC GS-20FLC / GS-20FLC / /4 20GS-24FLC / /4 P/Number... Flange...Hose 12GS-12FLC /4...3/4 16GS-16FLC GS-20FLC / GS-20FLC / /4 20GS-24FLC / /4 Caterpillar Style O-Ring Flange - 30 Bent Tube P/Number...Flange... Hose 12GS-16FLC /4 16GS-16FLC GS-20FLC / GS-20FLC / /4 20GS-24FLC / /4 Caterpillar Style O-Ring Flange Bent Tube P/Number... Flange...Hose 12GS-12FLC /4...3/4 12GS-16FLC /4 16GS-16FLC GS-20FLC / GS-20FLC / /4 20GS-24FLC / /4 P/Number...Flange... Hose 16GS-16FLC GS-20FLC / GS-20FLC / /4 20GS-24FLC / / *Supply To Order - Minimum Order Quantities May Apply

87 Section 3 Global-Crimp GSM Couplings - One Piece Male Pipe NPTF 30 Cone Seat Female JIC 37 Flare Swivel 90 Bent Tube Female Flat Face Swivel 90 Bent Tube (4000 psi limited) P/Number...Thread... Hose 24GSM-24MP...1-1/ /2 32GSM-32MP Male JIC 37 Flare P/Number...Thread... Hose 24GSM-24MJ...1-7/ /2 32GSM-32MJ...2-1/ Female JIC 37 Flare Swivel P/Number...Thread... Hose 24GSM-24FJX...1-7/ /2 32GSM-32FJX...2-1/ Female JIC 37 Flare Swivel 45 Bent Tube P/Number...Thread... Hose 24GSM-24FJX / /2 P/Number...Thread...Hose 24GSM-24FJX90M...1-7/ /2 Female BSPP Swivel P/Number... Thread...Hose 24GSM-24FBSPORX.. 1-1/ /2 32GSM-32FBSPORX Female Flat Face Swivel (4000 psi limited) P/Number...Thread...Hose 24GSM-24FFORX/4K /2 Female Flat Face Swivel 45 Bent Tube (4000 psi limited) P/Number...Thread...Hose 24GSM-24FFORX90M/4K /2 Female DIN 24 Cone Swivel Heavy Series with O-Ring P/Number... Thread...Hose 24GSM-38FDHORX. 38mm /2 Female DIN 24 Cone Swivel Heavy Series with O-Ring 45 Bent Tube P/Number... Thread...Hose 24GSM-38FDHORX45 38mm.. 1-1/2 Female DIN 24 Cone Swivel Heavy Series with O-Ring 90 Bent Tube P/Number...Thread...Hose 24GSM-24FFORX45/4K /2 P/Number... Thread...Hose 24GSM-38FDHORX90 38mm.. 1-1/2 *Manufactured To Order - Minimum Order Quantities May Apply 3.25

88 Section 3 Global-Crimp GSM Couplings - One Piece Code 61 O-Ring Flange Code 61 O-Ring Flange 90 Bent Tube Code 62 O-Ring Flange Heavy 60 Bent Tube P/Number... Flange...Hose 24GSM-24FL / /2 24GSM-32FL /2 32GSH-32FL Code 61 O-Ring Flange 30 Bent Tube P/Number...Flange... Hose 24GSM-24FL90S...1-1/ /2 32GSM-32FL Code 62 O-Ring Flange Heavy P/Number...Flange...Hose 24GSM-24FLH60M...1-1/ /2 32GSM-32FLH60M Code 62 O-Ring Flange Heavy 90 Bent Tube P/Number... Flange...Hose 24GSM-24FL30M / /2 Code 61 O-Ring Flange 45 Bent Tube P/Number...Flange... Hose 24GSM-24FLH...1-1/ /2 24GSM-32FLH /2 32GSM-32FLH GSM-32FLHCFM Code 62 O-Ring Flange Heavy 30 Bent Tube P/Number... Flange...Hose 24GSM-24FLH / /2 24GSM-24FLH / /2 24GSM-32FLH90S /2 32GSM-32FLH90M GSM-32FLH GSM-32FLHCFM P/Number... Flange...Hose 24GSM-24FL45M / /2 24GSM-32FL /2 32GSM-32FL45M Code 61 O-Ring Flange 60 Bent Tube P/number...Flange... Hose 24GSM-24FLH / /2 32GSM-32FLH30M Code 62 O-Ring Flange Heavy 45 Bent Tube P/Number... Flange...Hose 24GSM-24FL60M / /2 P/number...Flange... Hose 24GSM-24FLH45M / /2 24GSM-32FLH45M /2 32GSM-32FLH GSM-32FLHCFM *Manufactured To Order - Minimum Order Quantities May Apply

89 Section 3 Global-Crimp GSM Couplings - One Piece Caterpillar Style O-Ring Flange Caterpillar Style O-Ring Flange - 45 Bent Tube P/Number...Flange... Hose 24GSM-24FLC...1-1/ /2 32GSM-32FLC Caterpillar Style O-Ring Flange Bent Tube P/Number... Flange...Hose 24GSM-24FLC / /2 32GSM-32FLC Caterpillar Style O-Ring Flange - 60 Bent Tube P/Number...Flange... Hose 24GSM-24FLC / /2 Caterpillar Style O-Ring Flange - 30 Bent Tube P/Number...Flange...Hose 24GSM-24FLC / /2 32GSM-32FLC Caterpillar Style O-Ring Flange - 90 Bent Tube P/Number... Flange... Hose 24GSM-24FLC / /2 P/Number... Flange...Hose 24GSM-24FLC / /2 32GSM-32FLC *Manufactured To Order - Minimum Order Quantities May Apply 3.27

90 Section 3 Maxi-Crimp PCM Couplings - Two Piece Ferrule PCM (Skiving Required) C12, G5K, G6K Female Flat Face Swivel Code 61 O-Ring Flange 60 Bent Tube P/Number......Hose 24PCM-G6K /2 24PCM-2F /2 32PCM-2F Male Pipe NPTF 30 Cone Seat P/Number... Thread...Hose 24PCM-24MP / /2 32PCM-32MP P/Number...Thread... Hose 24PCM-24FFORX /2 Female Flat Face Swivel 90 Bent Tube P/Number... Thread.. Hose 24PCM-24FFORX90M /2 Code 61 O-Ring Flange P/Number...Flange...Hose 24PCM-24FL / /2 Code 61 O-Ring Flange 90 Bent Tube P/Number...Flange...Hose 24PCM-24FL / /2 32PCM-32FL Male JIC 37 Flare P/Number... Thread...Hose 24PCM-24MJ / /2 32PCM-32MJ /2...2 Female JIC 37 Flare Swivel P/Number...Flange... Hose 24PCM-24FL...1-1/ /2 24PCM-32FL /2 32PCM-32FL Code 61 O-Ring Flange 30 Bent Tube P/Number...Flange... Hose 24PCM-24FL / /2 P/Number... Thread...Hose 24PCM-24FJX / /2 32PCM-32FJX /2...2 Code 61 O-Ring Flange 45 Bent Tube Female JIC 37 Flare Swivel 90 Bent Tube P/Number...Flange... Hose 24PCM-24FL / /2 24PCM-32FL /2 32PCM-32FL P/Number... Thread...Hose 24PCM-24FJX / / *Supply To Order - Minimum Order Quantities May Apply

91 Section 3 Maxi-Crimp PCM Couplings - Two Piece Code 62 O-Ring Flange Heavy Code 62 O-Ring Flange Heavy 90 Bent Tube Caterpillar Style O-Ring Flange - 45 Bent Tube P/Number...Flange... Hose 24PCM-24FLH...1-1/ /2 24PCM-32FLH /2 32PCM-32FLH Code 62 O-Ring Flange Heavy 22.5 Bent Tube P/Number...Flange... Hose 24PCM-24FLH / /2 Code 62 O-Ring Flange Heavy 30 Bent Tube P/number...Flange... Hose 24PCM-24FLH / /2 32PCM-32FLH Code 62 O-Ring Flange Heavy 45 Bent Tube P/number...Flange... Hose 24PCM-24FLH / /2 24PCM-32FLH /2 32PCM-32FLH Code 62 O-Ring Flange Heavy 60 Bent Tube P/Number...Flange...Hose 24PCM-24FLH90M...1-1/ /2 24PCM-32FLH90M /2 32PCM-32FLH90M PCM-32FLH90L Caterpillar Style O-Ring Flange P/Number...Flange...Hose 24PCM-24FLC...1-1/ /2 32PCM-32FLC Caterpillar Style O-Ring Flange Bent Tube P/Number...Flange...Hose 24PCM-24FLC / /2 Caterpillar Style O-Ring Flange - 30 Bent Tube P/Number...Flange...Hose 24PCM-24FLC / /2 P/Number... Flange...Hose 24PCM-24FLC / /2 32PCM-32FLC Caterpillar Style O-Ring Flange - 60 Bent Tube P/Number... Flange...Hose 24PCM-24FLC / /2 32PCM-32FLC Caterpillar Style O-Ring Flange - 90 Bent Tube P/Number... Flange...Hose 24PCM-24FLC / /2 32PCM-32FLC P/Number...Flange... Hose 24PCM-24FLH / /2 32PCM-32FLH *Supply To Order - Minimum Order Quantities May Apply 3.29

92 Section 3 Vacu-Crimp GL Couplings - One Piece Code 61 O-Ring Flange Code 61 O-Ring Flange 45 Bent Tube Code 61 O-Ring Flange 90 Bent Tube P/Number... Flange...Hose 40GL-40FL / /2 40GL-48FL /2 40GL-56FL / /2 48GL-48FL GL-56FL / /2 64GL-64FL Code 61 O-Ring Flange 22.5 Bent Tube P/Number...Flange... Hose 40GL-40FL / /2 40GL-48FL /2 48GL-48FL GL-56FL / GL-56FL / /2 56GL-64FL /2 Code 61 O-Ring Flange 60 Bent Tube P/Number...Flange...Hose 40GL-40FL / /2 40GL-48FL /2 48GL-48FL GL-56FL / /2 64GL-64FL P/Number... Flange...Hose 40GL-40FL / /2 40GL-48FL /2 48GL-48FL Code 61 O-Ring Flange 30 Bent Tube P/Number...Flange... Hose 40GL-40FL / /2 48GL-48FL Code 61 O-Ring Flange 67.5 Bent Tube P/Number... Flange...Hose 40GL-40FL / /2 40GL-48FL /2 48GL-48FL P/Number...Flange... Hose 40GL-40FL / /2 48GL-48FL GL-64FL *Supply To Order - Minimum Order Quantities May Apply

93 Section 4 Adaptors Contents... Description...Page NIPPLES C1...JIC x JIC F1...ORFS x ORFS CB1...BSPT x BSPT CR1...BSPP x BSPP Encapsulated Seal CP1...BSPP x BSPP ZCR1...BSPP x BSPP Adjustable CPJ1...JIS x JIS (BSPP x BSPP) CPB1...BSPP x BSPT CN1...NPTF x NPTF CRB1...BSPP x BSPT Encapsulated Seal CPN1...BSPP x NPTF CU1...UNO x UNO Adjustable C2...JIC x JIC BULKHEAD ZC2...UNO x JIC BULKHEAD Extended F2...ORFS x ORFS BULKHEAD CA2...SAE x SAE BULKHEAD ZCR2...BSPP x JIC BULKHEAD CB2...BSPT x JIC CBA2...BSPT x SAE CBJ2...BSPT x JAP CR2...BSPP x JIC Encapsulated Seal CP2...BSPP x JIC ZCP2...BSPP x JIC 1.5mm Orifice CP2-E...BSPP x JIC Extended CM2...DIN x JIC CM2L...DKL x JIC CM2S...DKS x JIC CMP2L...DKL x BSPP CMP2S...DKS x BSPP CN2...NPTF x JIC FP2...BSPP x ORFS C3...SAE O Ring Boss x JIC F3...SAE O Ring Boss x ORFS M/M CB3...SAE O Ring Boss x BSPT CN3...SAE O Ring Boss x NPTF C4...SAE O Ring Boss x JIC EXTENDED CB4...BSPT x LP Straight Hose Tail CM4...DIN x LP Straight Hose Tail CN4...NPTF x LP Straight Hose Tail CP4...BSPP x LP Straight Hose Tail C5...SAE O Ring Boss x LP Straight Hose Tail CB5...BSPT x LP Straight Hose Tail CP6...BSPP Bulkhead CR6...BSPP x BSPP Bulkhead Encapsulated Seal F7...ORFS x JIC M/M SOCKETS C9...SAE O Ring Boss CB9...BSPT CN9...NPTF CP9...BSPP HALF SOCKETS C14...SAE O Ring Boss CB14...BSPT CP14...BSPP CN14...NPTF The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 4.1

94 Section 4 Adaptors Contents... Description... Page FIXED ADAPTORS CB18...BSPT x BSPT M/F CPN18...BSPP x NPTF CN18...NPTF x NPTF M/F CB20...BSPT x JIC F/M CP20...BSPP X JIC F/M CN20...NPTF x JIC F/M CB21...SAE O Ring Boss x BSPT M/F CN21...SAE O Ring Boss x NPTF M/F C22...JIC x JIC F/M CB22...SAE O Ring Boss x BSPT F/M CN22...SAE O Ring Boss x NPTF F/M STRAIGHT UNIONS CB24...BSPT x BSPP M/F CR24...BSPP x BSPP M/F CP24...BSPP x BSPP M/F CP24G...BSPP x BSPP M/F with 7/16" UNO Gauge Point CN24...NPTF x NPSM M/F CB25...BSPT x BSPP F/F CN25...NPTF x NPSM F/F CS25...JIC x JIC F/F C26...SAE O Ring Boss x JIC M/F CB26...SAE O Ring Boss x BSPP M/F CN26...SAE O Ring Boss x NPSM M/F C27G...JIC x JIC M/F with 7/16" UNO Gauge Point CB27...BSPT x JIC M/F CP27...BSPP x JIC M/F CN27...NPTF x JIC M/F CR27...BSPP x JIC Encapsulated Seal F27G...ORFS x ORFS M/F with 7/16" UNO Gauge Point CP28...BSPP x JIC F/F Gauge F28...ORFS x JIC M/F F29...ORFS x JIC F/M UNIONS C30...JIC x JIC M/F CB30...BSPT x BSPP M/F CN30...NPTF x NPSM M/F C31...SAE O Ring Boss x JIC M/F CN31...SAE O Ring Boss x NPSM M/F ELBOWS CB36...BSPT x BSPT M/M CN36...NPTF x NPTF M/M CB37...BSPT x BSPT M/F CN37...NPTF x NPTF M/F CB38...BSPT x JIC M/M CBJ38...BSPT x JIS M/M CP38...BSPP x JIC M/M CN38...NPTF x JIC M/M CB39...BSPT x BSPT F/F C40...SAE O Ring Boss x JIC M/M C41...SAE O Ring Boss x LP Hose Tail CB41...BSPT x LP Hose Tail CN41...NPTF x LP Hose Tail C42...JIC x JIC Bulkhead M/M The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.

95 Section 4 Adaptors Contents... Description...Page 90 UNIONS C46...JIC x JIC M/F CB46...BSPT x BSPP M/F CP46...BSPP x BSPP M/F CN46...NPTF x NPSM M/F F46...ORFS x ORFS M/F C47...SAE O Ring Boss x JIC M/F CB47...SAE O Ring Boss x BSPP M/F CN47...SAE O Ring Boss x NPTF M/F CB48...BSPT x JIC ZC52...SAE O Ring Boss x SAE O Ring Boss ELBOWS CB53...BSPT x BSPT M/M CBS53...BSPT x BSPT M/M CPB53...BSPP x BSPT M/M CPBS53...BSPP Swivel x BSPT M/M F53...ORFS x ORFS M/M CN53...NPTF x NPTF M/M CP53...BSPP x BSPT M/M CB54...BSPT x BSPT M/F CN54...NPTF x NPTF M/F CPB54...BSPP x BSPT CB55...BSPT x BSPT F/F CN55...NPTF x NPTF F/F CB56...BSPT x JIC M/M CBJ56...BSPT x JIS CP56...BSPP x JIC M/M CM56...DIN x JIC CN56...NPTF x JIC M/M FP56...BSPP x ORFS M/M CB57...BSPT x JIC Extended M/M CBS57...BSPT Swivel x JIC M/M CP57...BSPP Extended x JIC M/M CN57...NPTF x JIC Extended M/M C58...JIC x JIC M/M CB58...BSPT x JIC F/M CN58...NPTF x JIC F/M C59...SAE O Ring Boss x JIC M/M F59...SAE O Ring Boss x ORFS M/M CS59...SAE O Ring Boss Swivel x JIC M/M CE59...SAE O Ring Boss x JIC Extended M/M CES59...SAE O Ring Boss Swivel x JIC Extended M/M ZC59...SAE O Ring Boss x JIC Orifice Elbow 0.9mm CB59...SAE O Ring Boss x BSPT M/M CN59...SAE O Ring Boss x NPTF M/M C60...SAE O Ring Boss x LP Hose Tail M/M CB60...BSPT x LP Hose Tail M/M CP60...BSPP x LP Hose Tail M/M CN60...NPTF x LP Hose Tail M/M C61...JIC x JIC BULKHEAD M/M CA61...SAE x SAE BULKHEAD M/M TEES CB61...BSPT x BSPT x BSPP M/M/F F61...ORFS x ORFS x ORFS M/M/F CB62...BSPT x BSPT x BSPT M/M/M CN62...NPTF x NPTF x NPTF M/M/M The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 4.3

96 Section 4 Adaptors Contents... Description... Page TEES Cont d ZCP62...BSPP x BSPP x JIC M/M/M C63...JIC x JIC x JIC M/M/M F63...ORFS x ORFS x ORFS M/M/M CB63...BSPT x BSPT x BSPT F/F/F CN63...NPTF x NPTF x NPTF F/F/F C64...JIC x JIC x JIC F Swivel/M/M F64...ORFS x ORFS x ORFS F/M/M CB64...BSPT x BSPT x BSPT M/F/F CN64...NPTF x NPTF x NPTF M/F/F C65...JIC x JIC x JIC M/M/F Swivel CB65...JIC x JIC x BSPT M/M/M CP65...JIC x JIC x BSPP M/M/M CBP65...BSPP x BSPP x BSPT M/M/M CN65...JIC x JIC x NPTF M/M/M CBS66...BSPP x BSPP x BSPT F Swivel/F Swivel/M CN66...NPTF x NPTF x NPTF F/F/M CB67...JIC x BSPT x JIC M/M/M CP67...JIC x BSPP x JIC M/M/M CN67...JIC x NPTF x JIC M/M/M C68...JIC x JIC x SAE O Ring Boss M/M/M C69...SAE O Ring Boss x JIC x JIC M/M/M CB69...BSPP x BSPT x BSPT F Swivel/M/M C70...JIC x JIC x JIC BULKHEAD M/M/M C71...JIC x JIC BULKHEAD x JIC M/M/M ZCP71...JIC x JIC BULKHEAD x BSPP M/M/M CROSS C72...JIC x JIC x JIC x JIX M/M/M/M F72...ORFS x ORFS x ORFS x ORFS M/M/M/M CB72...BSPT x BSPT x BSPT x BSPT F/F/F/F CN72...NPTF x NPTF x NPTF x NPTF F/F/F/F REDUCING BUSHES CB73...BSPT x BSPT CR73...BSPP x BSPP Encapsulated Seal CP73...BSPP x BSPP Style A CP73...BSPP x BSPP Style B CPB73...BSPP x BSPT Style A CPB73...BSPP x BSPT Style B CN73...NPTF x NPTF C74...SAE O Ring Boss x SAE O Ring Boss CB74...SAE O Ring Boss x BSPT CN74...SAE O Ring Boss x NPTF Style A CN74...SAE O Ring Boss x NPTF Style B PLUGS AND CAP NUTS C77...SAE O Ring Boss Plug C77S...SAE O Ring Boss Socket Plug CB77...BSPT Plug CR77...BSPP Plug Encapsulated Seal CP77...BSPP Plug CR77S...BSPP Socket Plug CN77...NPTF Plug CM77...Metric Plug C78...JIC Plug F78...ORFS Plug The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.

97 Section 4 Adaptors Contents... Description...Page PLUGS AND CAP NUTS Cont d CK78...Metric Komatsu Plug C79...JIC Cap Nut CBS79...BSPP Cap Nut F79...ORFS Cap Nut CK79...Metric Komatsu Cap Nut BULKHEAD NUT C80...JIC CP80...BSPP F80...ORFS TUBE NUTS AND SLEEVES C83...JIC C83-**N...JIC Nut C83-**S...JIC Sleeve F83...ORFS F83-**N...ORFS Nut F83-**S...ORFS Sleeve TUBE REDUCERS C84...JIC x JIC F/M Style A C84-****R...JIC x JIC F/M Style A Reducer C84-****B...JIC x JIC F/M Style B F84...ORFS x ORFS F/M Style A F84-****R...ORFS x ORFS F/M Style A Reducer TUBEWELD FITTINGS C86...JIC Male Nipple F86...ORFS Male Nipple CB86...BSPT Male Nipple CN86...NPTF Male Nipple CP86...BSPP Male C87...JIC Female Union CB87...BSPP Female Union C88...JIC Male 90 Elbow S.A.E. FLANGES-TUBEWELD C92...Flange SAE O-Ring Code C92H...Flange SAE O-Ring Code J.I.C. TUBE ASSEMBLIES C93...JIC x JIC Short 90 M/F C93H...JIC x JIC Short 90 M/F C94...JIC x JIC Long 90 M/F C94H...JIC x JIC Long 90 M/F C95...JIC x JIC Tube 45 M/F J.I.C. TO S.A.E. FLANGED TUBEWELD ASSEMBLIES C96...JIC Male Flange Head Straight Code C96H...JIC Male Flange Head Straight Code C97...JIC Male Flange Head 90 Code C97H...JIC Male Flange Head 90 Code C98...JIC Male Flange Head 45 Code C98H...JIC Male Flange Head 45 Code FLH6K...JIC Male Flange Head 6000psi FLH6K45...JIC Male Flange Head psi FLH6K90...JIC Male Flange Head psi The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 4.5

98 Section 4 Adaptors Contents... Description... Page SPLIT CLAMPS FSC...Flange Code FSCH...Flange Code CATFHS...Flange CAT-Style SAE FLANGES FL...Blank Code FLH...Blank Code FP...Blank Code FPH...Blank Code FB...BSPP Code FN...NPTF Code FBH...BSPP Code O-RINGS R01...to suit UN Threads R02...to suit SAE Flanges R03...to suit BSPP Threads R05...to suit Male Swivel R06...to suit ORFS Fittings R19...Encapsulated to suit BSPP Threads SEALS R04...to suit BSPP Threads DIN Std R04B...to suit BSP.P Threads B.S Std R04M...to suit Metric Threads DKR...Metal Sealing Rings to DIN Std RETAINING RINGS R13...to suit BSPP O-Rings SEAL KITS SORKIT...O-Ring Assortment (UNO, ORFS, Code61 & Code62) SORKIT-P...BSPP O-Ring & Retainer Kit SORKIT-DM...Bonded Seal Kit (Metric Seal) SORKIT-DP...Bonded Seal Kit (BSPP Seal) SAE FLANGE BOLT KITS BKU-CAP...UNC Cap Head Bolt Kit BKUH-CAP...UNC Cap Head Bolt Kit Heavy Duty BKU-HEX...UNC Hex Head Bolt Kit BKUH-HEX...UNC Hex Head Bolt Kit Heavy Duty BKM-CAP...Metric Cap Head Bolt Kit BKMH-CAP...Metric Cap Head Bolt Kit Heavy Duty BKM-HEX...Metric Hex Head Bolt Kit BKMH-HEX...Metric Hex Head Bolt Kit Heavy Duty PLUG PLASTIC PPJ...JIC/SAE PPB...BSP/NPT PPM...Metric CAPS PLASTIC CPJ...JIC/SAE CPB...BSP/NPT CPM...Metric CPF61...Flange Code CPF62...Flange Code The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.

99 Section 4 Adaptors Contents... Description...Page FLARETITE SEALS IP...Individual Seals BP...Standard Packs QT...Bulk Packs BANJOS BJ1...Banjo Metric c/w Back Bore BJ2...Banjo BSPP c/w Back Bore BJ3...Banjo Metric to JIC-M BJB...Banjo Bolt Metric BJB...Banjo Bolt BSPP BJW...Banjo Washer The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 4.7

100 Section 4 Adaptors Contents... Description... Page THIS PAGE INTENTIONALLY LEFT (MOSTLY) BLANK 4.8 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.

101 *Manufactured To Order (minimum qtys may apply) Nipple M/M JIC x JIC Section 4 Adaptors Nipple M/M BSPT x BSPT Nipple M/M BSPP x BSPP Included in the supply is one O Ring and Retainer Washer. Jump Threads are supplied with O Ring & Retainer on large Thread only. P/Number... Thread C /16 x 7/16 C /2 x 1/2 C /16 x 7/16 C /16 x 9/16 C /4 x 7/16 C /4 x 9/16 C /4 x 3/4 C /8 x 3/4 C /8 x 7/8 C /16 x 9/16 C /16 x 3/4 C /16 x 7/8 C /16 x 1-1/16 C /16 x 1-1/16 C /16 x 7/8 C /16 x 1-1/16 C /16 x 1-3/16 C /16 x 1-5/16 C /8 x 1-5/16 C /8 x 1-5/8 C /8 x 1-5/8 C /8 x 1-7/8 C /2 x 2-1/2 Nipple M/M ORFS x ORFS P/Number...Thread CB /8 x 1/8 CB /4 x 1/8 CB1-0402Z (1.6mm orifice)...1/4 x 1/8 CB /4 x 1/4 CB /8 x 1/4 CB /8 x 3/8 CB /2 x 1/4 CB /2 x 3/8 CB /2 x 1/2 CB /8 x 1/2 CB /8 x 5/8 CB /4 x 1/4 CB /4 x 3/8 CB /4 x 1/2 CB /4 x 3/4 CB x 3/8 CB x 1/2 CB x 3/4 CB x 1 CB /4 x 3/4 CB /4 x 1 CB /4 x 1-1/4 * CB /2 x 3/4 CB /2 x 1 CB /2 x 1-1/4 CB /2 x 1-1/2 * CB x 1-1/4 CB x 1-1/2 CB x 2 CB /2 x 2-1/2 P/Number... Thread CP /8 x 1/8 CP /4 x 1/4 CP /8 x 1/4 CP /8 x 3/8 CP /2 x 3/8 CP /2 x 1/2 CP /4 x 1/2 CP /4 x 3/4 CP x 1/2 CP x 3/4 CP x 1 CP /4 x 1 CP /4 x 1-1/4 CP /2 x 1-1/4 CP /2 x 1-1/2 CP x 2 Nipple M/M BSPP x BSPP Adjustable P/Number... Thread F /16 x 9/16 F /16 x 11/16 F /16 x 13/16 F x 1 F /16 x 1 F /16 x 1-3/16 F /16 x 1-7/16 Nipple M/M BSPP x BSPP Encapsulated Seal Included in the supply. P/Number...Thread CR /8 x 1/8 CR /4 x 1/4 CR /8 x 1/4 CR /8 x 3/8 CR /2 x 3/8 CR /2 x 1/2 CR /4 x 1/2 CR /4 x 3/4 CR x 3/4 CR x 1 CR /4 x 1 CR /4 x 1-1/4 CR /2 x 1-1/2 P/Number... Thread CR1-0606Z...3/8 x 3/8 CR1-0808Z...1/2 x 1/2 Nipple M/M JIS x JIS (BSPP x BSPP) P/Number... Thread CPJ /4 x 1/4 CPJ /8 x 3/8 CPJ /2 x 1/2 CPJ /4 x 3/4 CPJ x 1 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.9

102 Nipple M/M BSPP x BSPT Section 4 Adaptors Nipple M/M BSPP x BSPT Encapsulated Seal *Manufactured To Order (minimum qtys may apply) Bulkhead Nipple M/M JIC x JIC P/Number... Thread CPB /8 x 1/4 CPB /4 x 1/4 CPB /4 x 3/8 CPB /8 x 1/4 CPB /8 x 3/8 CPB /8 x 1/2 CPB /2 x 1/4 CPB /2 x 3/8 CPB /2 x 1/2 CPB /2 x 3/4 CPB /4 x 1/2 CPB /4 x 3/4 CPB /4 x 1 CPB x 1/2 CPB x 3/4 CPB x 1 CPB /4 x 1 CPB /4 x 1-1/4 CPB /2 x 1-1/4 CPB /2 x 1-1/2 CPB x 1-1/4 * CPB x 1-1/2 CPB x 2 Nipple M/M NPTF x NPTF P/Number... Thread CN /8 x 1/8 CN /4 x 1/8 CN /4 x 1/4 CN /8 x 1/4 CN /8 x 3/8 CN /2 x 3/8 CN /2 x 1/2 CN /4 x 1/4 * CN /4 x 3/8 CN /4 x 1/2 CN /4 x 3/4 CN x 1/2 CN x 3/4 CN x 1 * CN /4 x 1 CN /4 x 1-1/4 CN /2 x 1-1/4 CN /2 x 1-1/2 CN x 1-1/2 CN x 2 * CN /2 x 2-1/2 P/Number... Thread CRB /8 x 1/4 CRB /8 x 3/8 * CRB /8 x 1/2 * CRB /2 x 3/8 CRB /2 x 1/2 CRB /4 x 3/4 CRB x 1 * CRB /4 x 1 CRB /4 x 1-1/4 Nipple M/M BSPP x NPTF P/Number... Thread CPN /4 x 1/4 * CPN /8 x 1/4 CPN /8 x 3/8 CPN /8 x 1/2 * CPN /2 x 3/8 CPN /2 x 1/2 * CPN /2 x 3/4 CPN /4 x 3/4 CPN x 1 * CPN x 1-1/4 * CPN /4 x 1-1/4 * CPN /4 x 1-1/2 Nipple M/M UNO x UNO Adjustable P/Number... Thread CU /16 x 9/16 CU /4 x 3/4 CU /8 x 3/4 CU /16 x 1-5/16 P/Number...Thread C /16 x 7/16 C E56...7/16 x 7/16 C /2 x 1/2 C /16 x 9/16 C E59...9/16 x 9/16 C /4 x 3/4 C E66...3/4 x 3/4 C /8 x 7/8 C /16 x 7/8 C /16 x 1-1/16 C /16 x 1-3/16 C /16 x 1-5/16 C /8 x 1-5/8 C /8 x 1-7/8 C /2 x 2-1/2 Bulkhead Nipple M/M UNO x JIC Extended P/Number...Thread * ZC /4 x 3/4 ZC /8 x 7/8 * ZC /16 x 1-1/16 * ZC /16 x 1-5/16 Bulkhead Nipple M/M ORFS x ORFS P/Number...Thread F /16 x 9/16 F /16 x 11/16 F /16 x 13/16 F x 1 F /16 x 1-1/316 F /16 x 1-7/16 F /16 x 1-11/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

103 *Manufactured To Order (minimum qtys may apply) Bulkhead Nipple M/M SAE x SAE Section 4 Adaptors Nipple M/M BSPT x JIC Nipple M/M BSPT x JIS P/Number... Thread CA /8 x 5/8 CA /4 x 3/4 CA /8 x 7/8 * CA /16 x 1-1/16 Bulkhead Nipple M/M BSPP x JIC P/Number... Thread * CR2-0609Z... 3/8 x 9/16 CR2-0814Z... 1/2 x 7/8 P/Number...Thread CB /8 x 3/8 CB /8 x 7/16 CB /8 x 1/2 CB /8 x 9/16 CB /4 x 7/16 CB /4 x 1/2 CB /4 x 9/16 CB /4 x 3/4 CB /4 x 7/8 CB /8 x 7/16 CB /8 x 1/2 CB /8 x 9/16 CB /8 x 3/4 CB /8 x 7/8 CB /8 x 1-1/16 CB /2 x 7/16 CB /2 x 9/16 CB /2 x 3/4 CB /2 x 7/8 CB /2 x 1-1/16 CB /2 x 1-5/16 CB /4 x 1/2 CB /4 x 9/16 CB /4 x 3/4 CB /4 x 7/8 CB /4 x 1-1/16 * CB /4 x 1-3/16 CB /4 x 1-5/16 CB x 3/4 CB x 7/8 CB x 1-1/16 CB x 1-5/16 CB x 1-5/8 CB /4 x 1-1/16 CB /4 x 1-5/16 CB /4 x 1-5/8 CB /4 x 1-7/8 * CB /4 x 2-1/2 CB /2 x 1-5/16 CB /2 x 1-5/8 CB /2 x 1-7/8 CB x 1-7/8 CB x 2-1/2 Nipple M/M BSPT x SAE P/Number... Thread CBJ /4 x 1/4 CBJ /8 x 3/8 CBJ /2 x 1/2 CBJ /4 x 3/4 CBJ x 1 Nipple M/M BSPP x JIC Encapsulated Seal Included in the supply P/Number... Thread CR /8 x 7/16 CR /8 x 9/16 CR /4 x 7/16 CR /4 x 1/2 CR /4 x 9/16 CR /4 x 3/4 CR /8 x 7/16 CR /8 x 9/16 CR /8 x 3/4 CR /8 x 7/8 CR /2 x 9/16 CR /2 x 3/4 CR /2 x 7/8 CR /2 x 1-1/16 CR /4 x 9/16 CR /4 x 3/4 CR /4 x 7/8 CR /4 x 1-1/16 CR /4 x 1-5/16 CR x 3/4 CR x 7/8 CR x 1-1/16 CR x 1-5/16 CR x 1-5/8 CR /4 x 1-1/16 CR /4 x 1-5/16 CR /4 x 1-5/8 CR /4 x 1-7/8 CR /2 x 1-5/16 CR /2 x 1-5/8 CR /2 x 1-7/8 P/Number...Thread CBA /4 x 5/8 CBA /8 x 5/8 CBA /2 x 5/8 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.11

104 Nipple M/M BSPP x JIC Section 4 Adaptors Nipple M/M BSPP x JIC Extended *Manufactured To Order (minimum qtys may apply) Nipple M/M Metric Tube Adaptor Light Series DKL x JIC P/Number... Thread CP /8 x 7/16 CP /8 x 9/16 CP /4 x 7/16 CP /4 x 1/2 CP /4 x 9/16 CP /4 x 3/4 CP /8 x 7/16 CP /8 x 9/16 CP /8 x 3/4 CP /8 x 7/8 CP /2 x 7/16 CP /2 x 9/16 CP /2 x 3/4 CP /2 x 7/8 CP /2 x 1-1/16 CP /4 x 9/16 CP /4 x 3/4 CP /4 x 7/8 CP /4 x 1-1/16 CP /4 x 1-5/16 CP x 3/4 CP x 7/8 CP x 1-1/16 CP x 1-5/16 CP x 1-5/8 * CP /4 x 3/4 CP /4 x 1-1/16 CP /4 x 1-5/16 CP /4 x 1-5/8 CP /4 x 1-7/8 CP /4 x 2-1/2 CP /2 x 1-5/16 CP /2 x 1-5/8 CP /2 x 1-7/8 CP x 1-5/8 CP x 1-7/8 CP x 2-1/2 Nipple M/M BSPP x JIC 1.5mm Orifice P/Number... Thread ZCP MM...3/8 x 9/16 P/Number... Thread * CP2-E /4 x 9/16 * CP2-E /4 x 9/16 * CP2-E /8 x 9/16 * CP2-E /8 x 9/16 * CP2-E /8 x 3/4 * CP2-E /8 x 3/4 Nipple M/M Metric Port Adaptor DIN x JIC P/Number... Thread CM M8x1.0 x 7/16 CM M8x1.0 x 9/16 CM M10x1.0 x 7/16 CM M12x1.5 x 7/16 CM M12x1.5 x 9/16 CM M12x1.5 x 3/4 CM M14x1.5 x 9/16 CM M14x1.5 x 3/4 CM M16x1.5 x 9/16 CM M16x1.5 x 3/4 CM M16x1.5 x 7/8 CM M18x1.5 x 9/16 CM M18x1.5 x 3/4 CM M18x1.5 x 7/8 CM M18x1.5 x 1-1/16 ZCM M20x1.5 x 9/16 CM M20x1.5 x 1 CM M20x1.5 x 7/8 CM M20x1.5 x 1-1/16 CM M22x1.5 x 7/16 CM M22x1.5 x 9/16 CM M22x1.5 x 3/4 CM M22x1.5 x 7/8 CM M22x1.5 x 1-1/16 CM M26x1.5 x 7/8 CM M26x1.5 x 1-1/16 CM M26x1.5 x 1-5/16 CM M27x2.0 x 1-1/16 CM M28x2.0 x 1-1/16 CM M28x2.0 x 1-5/16 CM M33x2.0 x 3/4 CM M33x2.0 x 1-1/16 CM M33x2.0 x 1-5/16 CM M33x2.0 x 1-5/8 CM M42x2.0 x 1-5/16 CM M42x2.0 x 1-5/8 CM M42x2.0 x 1-7/8 CM M48x2.0 x 1-5/8 CM M48x2.0 x 1-7/8 P/Number... Tube OD...Thread * CM2L L... M12x1.5 x 7/16 * CM2L L... M12x1.5 x 9/16 CM2L L... M14x1.5 x 9/16 * CM2L L... M14x1.5 x 3/4 CM2L L... M18x1.5 x 9/16 * CM2L L... M18x1.5 x 3/4 CM2L L... M22x1.5 x 3/4 * CM2L L... M22x1.5 x 7/8 Nipple M/M Metric Tube Adaptor Strong Series DKS x JIC P/Number...Tube OD...Thread * CM2S S... M18x1.5 x 9/16 * CM2S S... M24x1.5 x 3/4 * CM2S S.. M24x1.5 x 1-1/16 * CM2S S... M30x2.0 x 7/8 * CM2S S.. M36x2.0 x 1-1/16 * CM2S S.. M42x2.0 x 1-5/16 Nipple M/M Metric Tube Adaptor Light Series DKL x BSPP P/Number...Tube OD...Thread * CMP2L L... M14x1.5 x 1/4 * CMP2L L... M16x1.5 x 3/8 * CMP2L L... M18x1.5 x 1/2 * CMP2L L... M22x1.5 x 3/4 CMP2L L... M30x2.0 x 3/4 CMP2L L...M36x2.0 x For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

105 *Manufactured To Order (minimum qtys may apply) Nipple M/M Metric Tube Adaptor Strong Series DKS x BSPP Section 4 Adaptors Nipple M/M NPTF x JIC Nipple M/M S.A.E. O Ring Boss x JIC P/Number... Tube OD... Thread * CMP2S S...M16x1.5 x 1/4 * CMP2S S...M18x1.5 x 1/4 * CMP2S S...M18x1.5 x 3/8 * CMP2S S...M20x1.5 x 3/8 * CMP2S S...M22x1.5 x 1/2 * CMP2S S...M24x1.5 x 3/8 * CMP2S S...M24x1.5 x 1/2 * CMP2S S...M30x2.0 x 3/4 * CMP2S S...M36x2.0 x 3/4 * CMP2S S.. M42x2.0 x 1-1/4 * CMP2S S.. M52x2.0 x 1-1/2 P/Number...Thread CN /8 x 7/16 CN /8 x 1/2 CN /8 x 9/16 CN /4 x 7/16 CN /4 x 1/2 CN /4 x 9/16 CN /4 x 3/4 CN /8 x 7/16 * CN /8 x 1/2 CN /8 x 9/16 CN /8 x 3/4 CN /8 x 7/8 CN /8 x 1-1/16 CN /2 x 7/16 CN /2 x 9/16 CN /2 x 3/4 CN /2 x 7/8 CN /2 x 1-1/16 CN /4 x 7/16 CN /4 x 9/16 CN /4 x 3/4 CN /4 x 7/8 CN /4 x 1-1/16 * CN /4 x 1-3/16 CN /4 x 1-5/16 * CN /4 x 1-5/8 CN x 7/8 CN x 1-1/16 CN x 1-5/16 CN x 1-5/8 CN /4 x 1-1/16 CN /4 x 1-5/16 * CN /4 x 1-5/8 CN /4 x 1-7/8 CN /2 x 1-5/8 * CN /2 x 1-7/8 CN x 1-7/8 CN x 2-1/2 Nipple M/M BSPP x ORFS P/Number...Thread FP /4 x 9/16 FP /8 x 11/16 FP /2 x 11/16 FP /2 x 13/16 FP /2 x 1 FP /2 x 1-3/16 FP /4 x 1 FP /4 x 1-3/16 FP x 1-7/16 P/Number... Thread C /8 x 9/16 C /16 x 7/16 C /16 x 9/16 C /16 x 3/4 C /2 x 7/16 C /2 x 1/2 C /2 x 9/16 C /16 x 7/16 * C /16 x 1/2 C /16 x 9/16 C /16 x 3/4 C /16 x 7/8 C /4 x 7/16 C /4 x 1/2 C /4 x 9/16 C /4 x 3/4 C /4 x 7/8 C /4 x 1-1/16 C /4 x 1-5/16 C /8 x 9/16 C /8 x 3/4 C /8 x 7/8 C /8 x 1-1/16 C /8 x 1-5/16 C /16 x 7/16 C /16 x 9/16 C /16 x 3/4 C /16 x 7/8 C /16 x 1-1/16 C /16 x 1-5/16 C /16 x 1-1/16 C /16 x 1-3/16 C /16 x 3/4 C /16 x 7/8 C /16 x 1-1/16 C /16 x 1-3/16 C /16 x 1-5/16 C /16 x 1-5/8 C /8 x 1-1/16 C /8 x 1-5/16 C /8 x 1-5/8 C /8 x 1-7/8 C /8 x 1-5/16 C /8 x 1-5/8 C /8 x 1-7/8 * C /8 x 2-1/2 * C /2 x 1-7/8 * C /2 x 2-1/2 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.13

106 Nipple M/M S.A.E. O Ring Boss x ORFS Section 4 Adaptors Nipple M/M S.A.E. O Ring Boss x NPTF *Manufactured To Order (minimum qtys may apply) Clamp-on Hosetail M/M BSPT x Tail P/Number... Thread F /16 x 9/16 F /16 x 11/16 F /16 x 9/16 F /16 x 11/16 * F /4 x 11/16 F /4 x 13/16 F /8 x 1 F /16 x 1-3/16 F /16 x 1-7/16 F /16 x 1-7/16 Nipple M/M S.A.E. O Ring Boss x BSPT P/Number... Thread CB /16 x 1/4 CB /16 x 3/8 CB /16 x 1/2 CB /4 x 1/4 CB /4 x 3/8 CB /4 x 1/2 CB /4 x 3/4 CB /8 x 1/4 CB /8 x 3/8 CB /8 x 1/2 CB /8 x 3/4 CB /16 x 1/2 CB /16 x 3/4 CB /16 x 1 CB /16 x 3/4 CB /16 x 1/2 CB /16 x 3/4 CB /16 x 1 CB /16 x 1-1/4 CB /8 x 1 CB /8 x 1-1/4 CB /8 x 1-1/2 CB /8 x 1-1/2 P/Number... Thread CN /16 x 1/4 CN /16 x 3/8 * CN /4 x 1/4 CN /4 x 3/8 * CN /4 x 1/2 CN /8 x 1/4 CN /8 x 3/8 * CN /8 x 1/2 * CN /8 x 3/4 CN /16 x 1/2 * CN /16 x 3/4 CN /16 x 1 CN /16 x 3/4 * CN /16 x 1 CN /16 x 1-1/4 * CN /8 x 1 * CN /8 x 1-1/4 CN /8 x 1-1/2 * CN /8 x 1-1/2 Extended Nipple M/M S.A.E. O Ring Boss x JIC P/Number... Thread * C /16 x 7/16 C /2 x 1/2 C /16 x 7/16 C /16 x 9/16 C /4 x 3/4 C /8 x 3/4 C /8 x 7/8 C /8 x 1-1/16 * C /16 x 7/8 C /16 x 1-1/16 * C /16 x 1-1/16 C /16 x 1-5/16 * C /8 x 1-5/8 P/Number... Thread...Hose CB /4... 1/4 CB /4... 3/8 CB /4... 1/2 CB /8... 1/4 CB /8... 3/8 CB /8... 1/2 CB /8... 5/8 CB /2... 3/8 CB /2... 1/2 CB /2... 5/8 CB /2... 3/4 CB / CB /4... 3/4 CB / CB / /4 CB /4 CB CB /4 CB /2 CB / CB / /4 CB / /2 CB / /4 CB / /2 CB / * CB / /2 CB * CB /2 * CB / /2 Clamp-on Hosetail M/M Metric x Tail P/Number... Thread...Hose CM M CM M / For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

107 *Manufactured To Order (minimum qtys may apply) Section 4 Adaptors Clamp-on Hosetail M/M NPTF x Tail Clamp-on Hosetail M/M S.A.E. O Ring Boss x Tail Bulkhead Nipple M/M BSPP x BSPP Encapsulated Seal P/Number... Thread... Hose * CN /4... 1/4 CN /4... 3/8 CN /8... 3/8 CN /8... 1/2 CN /8... 5/8 * CN /2... 1/2 * CN /2... 5/8 CN /4... 3/4 CN / CN CN /4 CN /2 CN /8 CN / /4 CN / /2 CN / CN / /4 CN / /2 CN / CN Clamp-on Hosetail M/M BSPP x Tail P/Number... Thread... Hose CP /8... 3/4 CP /2... 3/4 CP / CP / /4 CP /4... 3/4 CP / CP / /4 CP / /2 CP CP /4 CP /2 CP / CP / /4 CP / /2 * CP / CP / /2 CP / CP P/Number...Thread...Hose C /4...1/2 C /4... 3/4 C /8...1/2 C /8... 3/4 C / /4 * C /16...3/4 C / C / /4 * C / /4 C / C / /4 C / /2 C / /4 C / /2 C / /2 * C / Clamp-on Hosetail F/M BSPT x Tail P/Number...Thread...Hose CB /4...3/4 CB CB / /4 Bulkhead Nipple M/M BSPP x BSPP P/Number...Thread CP /4 x 1/4 CP /8 x 3/8 CP /2 x 1/2 CP /4 x 3/4 CP x 1 CP /4 x 1-1/4 P/number... Thread * CR /4 x 1/4 CR /8 x 3/8 CR /2 x 1/2 CR /4 x 3/4 CR x 1 Nipple M/M ORFS x JIC P/Number... Thread F /16 x 9/16 * F /16 x 7/16 F /16 x 9/16 F /16 x 3/4 F /16 x 7/8 F x 7/8 F /16 x 1-1/16 F /16 x 1-5/16 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.15

108 Socket F/F S.A.E. O Ring Section 4 Adaptors Socket F/F BSPP *Manufactured To Order (minimum qtys may apply) Half Socket F NPTF P/Number... Thread C /16 x 7/16 C /16 x 9/16 C /4 x 3/4 C /8 x 7/8 C /16 x 1-1/16 C /16 x 1-5/16 * C /8 x 1-5/8 Socket F/F BSPT P/Number...Thread1/8 x 1/8 CP /4 x 1/4 CP /8 x 3/8 CP /2 x 1/2 CP /4 x 3/4 CP x 1 CP /4 x 1-1/4 CP /2 x 1-1/2 CP x 2 3 x 3 Half Socket F S.A.E. O Ring P/Number...Thread CN /8 CN /4 CN /8 CN /2 CN /4 CN * CN /4 * CN /2 CN Adaptor Fixed M/F BSPT x BSPT P/Number... Thread CB /8 x 1/8 CB /4 x 1/8 CB /4 x 1/4 CB /8 x 1/8 CB /8 x 1/4 CB /8 x 3/8 CB /2 x 1/4 CB /2 x 3/8 CB /2 x 1/2 CB /4 x 1/2 CB /4 x 3/4 CB x 3/4 CB x 1 CB /4 x 1-1/4 CB /2 x 1-1/2 CB x 2 CB /2 x 2-1/2 3 x 3 Socket F/F NPTF P/Number... Thread CN /8 x 1/8 CN /4 x 1/4 CN /8 x 3/8 CN /2 x 1/2 CN /4 x 3/4 CN x 1 CN /4 x 1-1/4 CN /2 x 1-1/2 CN x 2 * CN /2 x 2-1/2 CN x 3 P/Number... Thread C /16 C /2 C /16 C /4 C /8 C /16 C /16 C /8 1-7/8 Half Socket F BSPT P/Number... Thread CB /8 CB /4 CB /8 CB /2 CB /4 CB CB /4 CB /2 CB Half Socket F BSPP P/Number... Thread * CP /8 CP /2 CP /4 CP * CP /4 P/Number...Thread CB /8 x 1/8 CB /8 x 1/4 CB /4 x 1/4 CB /4 x 3/8 CB /8 x 3/8 CB /8 x 1/2 CB /2 x 1/2 CB /2 x 3/4 CB /4 x 3/4 CB x 1 Adaptor Fixed M/F BSPP x NPTF P/Number...Thread CPN /4 x 1 CPN /4 x 1-1/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

109 *Manufactured To Order (minimum qtys may apply) Adaptor Fixed M/F NPTF x NPTF Section 4 Adaptors Adaptor Fixed F/M NPTF x JIC Adaptor Fixed M/F S.A.E. O Ring Boss x NPTF P/Number... Thread CN /8 x 1/8 CN /8 x 1/4 CN /4 x 1/4 CN /4 x 3/8 CN /8 x 3/8 CN /8 x 1/2 CN /2 x 1/2 CN /2 x 3/4 CN /4 x 3/4 * CN x 1 * CN /4 x 1-1/4 * CN /2 x 1-1/2 Adaptor Fixed F/M BSPT x JIC P/Number...Thread CN /8 x 7/16 CN /8 x 1/2 CN /8 x 9/16 CN /4 x 7/16 CN /4 x 1/2 CN /4 x 9/16 CN /8 x 9/16 CN /8 x 3/4 CN /2 x 3/4 CN /2 x 7/8 CN /4 x 1-1/16 CN x 1-5/16 * CN /4 x 1-5/8 * CN /2 x 1-7/8 CN x 2-1/2 Adaptor Fixed M/F S.A.E. O Ring Boss x BSPT P/Number... Thread * CN /16 x 1/4 * CN /16 x 1/4 * CN /16 x 3/8 * CN /4 x 3/8 * CN /4 x 1/2 CN /8 x 1/2 * CN /16 x 1/2 * CN /16 x 3/4 * CN /16 x 1 CN /16 x 3/4 * CN /16 x 1 * CN /8 x 1 * CN /8 x 1-1/4 Adaptor Fixed F/M JIC x JIC P/Number... Thread CB /8 x 7/16 CB /8 x 9/16 CB /4 x 7/16 CB /4 x 1/2 CB /4 x 9/16 CB /8 x 9/16 CB /8 x 3/4 CB /2 x 9/16 CB /2 x 3/4 CB /2 x 7/8 CB /2 x 1-1/16 CB /4 x 1-1/16 CB x 1-5/16 Gauge Adaptor Fixed F/M BSPP x JIC P/Number...Thread CB /16 x 1/4 CB /16 x 1/4 CB /16 x 3/8 CB /4 x 3/8 CB /4 x 1/2 CB /8 x 3/8 CB /8 x 1/2 CB /16 x 1/2 CB /16 x 3/4 P/Number... Thread * C /16 x 7/16 * C /16 x 9/16 * C /4 x 3/4 * C /8 x 7/8 C /16 x 1-1/16 * C /16 x 1-5/16 C Z (0.6mm orifice).7/16x7/16 C Z (0.9mm orifice).9/16x9/16 C Z (0.9mm orifice)...3/4x3/4 C Z (1.2mm orifice)...7/8x7/8 Adaptor Fixed F/M S.A.E. O Ring Boss x BSPT P/Number... Thread CP G... 1/4 x 7/16 CP G... 1/4 x 9/16 CP G... 1/2 x 9/16 P/Number... Thread CB /16 x 3/8 CB /4 x 3/8 CB /4 x 1/2 CB /8 x 3/8 CB /8 x 1/2 CB /16 x 3/4 CB /16 x 1 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.17

110 Section 4 Adaptors *Manufactured To Order (minimum qtys may apply) Adaptor F/M S.A.E. O Ring Boss x NPTF Straight Union M/F BSPP x BSPP with 7/16" UNO Gauge Point Straight Union F/F SWIVEL x JIC P/Number... Thread CN /16 x 3/4 Straight Union M/F BSPT x BSPP P/Number... Thread CB /8 x 1/8 CB /4 x 1/4 CB /8 x 3/8 CB /8 x 1/2 CB /2 x 3/8 CB /2 x 1/2 CB /4 x 3/4 CB /4 x 1 CB x 1 CB x 1-1/4 CB x 1-1/2 CB /4 x 1-1/4 CB /2 x 1-1/2 Straight Union M/F BSPP x BSPP Encapsulated Seal P/Number... Thread CR /4 x 1/4 CR /8 x 3/8 CR /8 x 1/2 CR /2 x 1/2 CR /4 x 3/4 CR x 1 CR /4 x 1-1/4 Straight Union M/F BSPP x BSPP P/Number... Thread CP /4 x 1/4 CP /8 x 3/8 CP /8 x 1/2 CP /2 x 1/2 CP /4 x 3/4 CP x 1 CP x 1-1/4 CP /4 x 1-1/4 P/Number... Thread CP24G /4 x 1/4 x 7/16 CP24G /8 x 3/8 x 7/16 CP24G /2 x 1/2 x 7/16 CP24G /4 x 3/4 x 7/16 CP24G x 1 x 7/16 CP24G /4 x 1-1/4 x 7/16 Straight Union M/F NPTF x NPSM P/Number... Thread CN /8 x 1/8 CN /4 x 1/4 CN /8 x 3/8 * CN /8 x 1/2 CN /2 x 1/2 CN /4 x 3/4 CN x 1 CN /4 x 1-1/4 CN /2 x 1-1/2 Straight Union F/F BSPT x BSPP P/Number... Thread CB /4 x 1/4 CB /8 x 3/8 CB /2 x 1/2 CB /4 x 3/4 CB x 1 Straight Union F/F NPTF x NPSM P/Number... Thread * CN /4 x 1/4 CN /8 x 3/8 CN /2 x 1/2 CN /4 x 3/4 CN x 1 P/Number...Thread CS /16 x 7/16 CS /16 x 9/16 CS /4 x 3/4 CS /8 x 7/8 CS /16 x 1-1/16 CS /16 x 1-5/16 Straight Union M/F S.A.E. O Ring Boss x JIC P/Number...Thread C /16 x 7/16 C /16 x 9/16 C /16 x 3/4 C /4 x 9/16 C /4 x 3/4 C /8 x 7/8 C /8 x 1-1/16 C /16 x 1-1/16 C /16 x 1-5/16 C /8 x 1-5/8 * C /8 x 1-7/8 Straight Union M/F S.A.E. O Ring Boss x BSPP P/Number...Thread CB /16 x 1/4 CB /16 x 1/4 CB /4 x 3/8 CB /4 x 1/2 CB /8 x 3/8 CB /8 x 1/2 * CB /8 x 3/4 CB /16 x 3/4 CB /16 x 1 * CB /8 x 1-1/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

111 *Manufactured To Order (minimum qtys may apply) Straight Union M/F S.A.E. O Ring Boss x NPSM Section 4 Adaptors Straight Union M/F BSPP x JIC Straight Union M/F ORFS x ORFS with 7/16" UNO Gauge Point P/Number... Thread * CN /4 x 3/8 CN /4 x 1/2 * CN /8 x 1/2 * CN /8 x 3/4 * CN /16 x 3/4 * CN /16 x 1 CN /8 x 1-1/4 Straight Union M/F JIC x JIC with 7/16" UNO Gauge Point P/Number... Thread C27G /16 x 7/16 x 7/16 C27G /16 x 9/16 x 7/16 C27G /4 x 3/4 x 7/16 C27G /8 x 7/8 x 7/16 C27G /16 x 1-1/16 x 7/16 C27G /16 x 1-5/16 x 7/16 C27G /8 x 1-5/8 x 7/16 Straight Union M/F BSPT x JIC P/Number... Thread CB /8 x 7/16 CB /4 x 7/16 CB /4 x 9/16 CB /8 x 9/16 CB /8 x 3/4 CB /8 x 7/8 CB /2 x 3/4 CB /2 x 7/8 CB /2 x 1-1/16 CB /4 x 1-1/16 CB x 1-5/16 CB /4 x 1-5/8 P/Number...Thread CP /4 x 7/16 CP /4 x 9/16 CP /8 x 9/16 CP /8 x 3/4 CP /8 x 7/8 CP /2 x 3/4 CP /2 x 7/8 CP /4 x 7/8 CP /4 x 1-1/16 CP x 1-1/16 CP x 1-5/16 CP x 1-5/8 CP /4 x 1-5/16 CP /4 x 1-5/8 CP /2 x 1-7/8 Straight Union M/F NPTF x JIC P/Number...Thread CN /4 x 7/16 CN /4 x 9/16 CN /8 x 9/16 CN /8 x 3/4 CN /2 x 3/4 CN /2 x 7/8 CN /4 x 1-1/16 CN x 1-5/16 Straight Union M/F BSPP x JIC Encapsulated Seal P/Number...Thread CR /4 x 7/16 CR /4 x 9/16 CR /8 x 9/16 CR /8 x 3/4 CR /8 x 7/8 CR /2 x 3/4 CR /2 x 7/8 * CR /4 x 7/8 * CR /4 x 1-1/16 CR x 1-1/16 CR x 1-5/16 CR /4 x 1-5/8 P/Number... Thread F27G /16 x 11/16 x 7/16 F27G /16 x 13/16 x 7/16 F27G x 1 x 7/16 F27G /16 x 1-3/16 x 7/16 F27G /16 x 1-7/16 x 7/16 F27G /16 x 1-11/16 x 7/16 Gauge Adaptor Union F/F BSPP x JIC Gauge P/Number... Thread CP G...1/4 x 9/16 Straight Union M/F ORFS x JIC P/Number... Thread F /16 x 9/16 F /16 x 3/4 F x 7/8 * F /16 x 1-1/16 F /16 x 1-5/16 Straight Union F/M ORFS x JIC P/Number... Thread F /16 x 7/16 F /16 x 9/16 F /16 x 3/4 F x 7/8 F /16 x 1-1/16 F /16 x 1-5/16 * F /16 x 1-5/8 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.19

112 45 deg Union M/F JIC x JIC Section 4 Adaptors 45 deg Union M/F S.A.E. O Ring Boss x JIC *Manufactured To Order (minimum qtys may apply) 45 deg Elbow M/F BSPT x BSPT P/Number... Thread C F...7/16 x 7/16 C F...7/16 x 9/16 C F...5/8 x 5/8 C F...9/16 x 9/16 C F...3/4 x 3/4 C F...7/8 x 3/4 C F...7/8 x 7/8 C F...1-1/16 x 1-1/16 C F...1-5/16 x 1-5/16 C F...1-5/8 x 1-5/8 C /8 x 1-7/8 C /2 x 2-1/2 45 deg Union M/F BSPT x BSPP P/Number... Thread CB F...1/8 x 1/8 CB F...1/4 x 1/4 CB F...3/8 x 3/8 CB F...1/2 x 1/2 CB F...3/4 x 3/4 CB F...1 x 1 45 deg Union M/F NPTF x NPSM P/Number... Thread CN /8 x 1/8 * CN /4 x 1/4 * CN /8 x 3/8 * CN /2 x 1/2 * CN /4 x 3/4 * CN x 1 45 deg Union M/F ORFS x ORFS P/Number... Thread F /16 x 9/16 F /16 x 11/16 F /16 x 13/16 F x 1 F /16 x 1-3/16 F /16 x 1-7/16 P/Number... Thread C /16 x 9/16 C /4 x 3/4 C /8 x 7/8 * C /16 x 1-1/16 C /16 x 1-5/16 45 deg Union M/F S.A.E. O Ring Boss x NPSM P/Number... Thread CN /4 x 1/2 CN /8 x 1/2 45 deg Elbow M/M BSPT x BSPT P/Number... Thread CB F... 1/8 x 1/8 CB F... 1/4 x 1/4 CB F... 3/8 x 3/8 CB F... 1/2 x 1/2 CB F... 3/4 x 1/2 CB F... 3/4 x 3/4 CB F... 1 x 3/4 CB F... 1 x 1 * CB /2 x 1-1/2 Elbow 45 deg M/M NPTF x NPTF P/Number... Thread CN /8 x 1/8 * CN F... 1/4 x 1/4 * CN /8 x 3/8 * CN /2 x 1/2 * CN /4 x 3/4 * CN x 1 P/Number...Thread CB F...1/8 x 1/8 CB F...1/4 x 1/4 CB F...3/8 x 3/8 CB F...1/2 x 1/2 CB F...3/4 x 3/4 CB F... 1 x 1 45 deg Elbow M/F NPTF x NPTF P/Number...Thread CN F...1/8 x 1/8 CN F...1/4 x 1/4 CN F...3/8 x 3/8 CN F...1/2 x 1/2 CN F...3/4 x 3/4 CN F... 1 x 1 CN /4 x 1-1/4 Elbow 45 deg M/M BSPT x JIC P/Number...Thread CB F...1/8 x 7/16 CB F...1/4 x 7/16 CB F...1/4 x 1/2 CB F...1/4 x 9/16 CB F...1/4 x 3/4 CB F...3/8 x 9/16 CB F...3/8 x 3/4 CB /8 x 7/8 CB F...1/2 x 9/16 CB F...1/2 x 3/4 CB F...1/2 x 7/8 CB F...1/2 x 1-1/16 CB F...3/4 x 7/8 CB F...3/4 x 1-1/16 CB F...3/4 x 1-5/16 CB F...1 x 1-5/16 CB F...1 x 1-1/2 CB F /4 x 1-1/2 CB /2 x 1-7/8 CB x 2-1/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

113 *Manufactured To Order (minimum qtys may apply) Elbow 45 deg M/M BSPT x JIS Section 4 Adaptors 45 deg Elbow. M/M NPTF x JIC 45 deg Elbow. M/M S.A.E. O Ring Boss x JIC P/Number... Thread * CBJ /4 x 1/4 CBJ /8 x 3/8 CBJ /2 x 1/2 CBJ /4 x 3/4 CBJ x 1 45 deg Elbow. M/M BSPP x JIC P/Number... Thread CP F... 1/4 x 7/16 CP F... 1/4 x 9/16 CP F... 1/4 x 3/4 CP F... 3/8 x 9/16 CP F... 3/8 x 3/4 CP F... 1/2 x 9/16 CP F... 1/2 x 3/4 CP F... 1/2 x 7/8 CP F...1/2 x 1-1/16 CP F... 3/4 x 3/4 CP F...3/4 x 1-1/16 CP x 1-5/16 CP F /4 x 1-5/8 * CP /2 x 1-7/8 P/Number...Thread CN F...1/8 x 7/16 CN F...1/4 x 7/16 CN F...1/4 x 9/16 CN F...1/4 x 3/4 CN F...3/8 x 9/16 CN F...3/8 x 3/4 CN /8 x 7/8 CN F...1/2 x 9/16 CN F...1/2 x 3/4 CN F...1/2 x 7/8 CN CN F...3/4 x 7/8 CN F... 3/4 x 1-1/16 CN CN F...1 x 1-1/16 CN F...1 x 1-5/16 CN x 1-5/8 CN /4 x 1-5/16 CN F /4 x 1-5/8 CN /4 x 1-7/8 CN /2 x 1-7/8 CN x 1-7/8 CN x 2-1/2 45 deg Elbow. F/F BSPT x BSPT P/Number...Thread CB F...1/4 x 1/4 CB F...3/8 x 3/8 CB F...1/2 x 1/2 CB F...3/4 x 3/4 CB F... 1 x 1 P/Number... Thread C F...7/16 x 7/16 C F...9/16 x 7/16 C F...9/16 x 9/16 C F...9/16 x 3/4 C F...3/4 x 9/16 C F...3/4 x 3/4 C F...3/4 x 7/8 C F...7/8 x 3/4 C F...7/8 x 7/8 C F... 7/8 x 1-1/16 C /16 x 3/4 C F /16 x 7/8 C F...1-1/16 x 1-1/16 C F...1-1/16 x 1-5/16 C F...1-5/16 x 1-1/16 C F...1-5/16 x 1-5/16 C F...1-5/16 x 1-5/8 C F...1-5/8 x 1-5/16 C F...1-5/8 x 1-5/8 C /8 x 1-7/8 * C /2 x 2-1/2 Clamp-on 45 deg Elbow. M/M S.A.E. O Ring Boss x Tail P/Number...Thread...Hose C /4...3/4 * C /8...1/2 C / * C / * C / /4 * C / /2 * C / /4 * C / /2 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.21

114 Clamp-on 45 deg Elbow. M/M BSPT x Tail Section 4 Adaptors 90 deg Union M/F JIC x JIC *Manufactured To Order (minimum qtys may apply) 90 deg Union M/F NPTF x NPSM P/Number...Thread...Hose CB /2...1/2 * CB /2...3/4 CB /4...3/4 CB /4...1 CB CB /4 CB / /4 CB / /2 Clamp-on 45 deg Elbow. M/M NPTF x Tail P/Number...Thread...Hose * CN /8...1/2 * CN /2...3/4 CN /4...3/4 CN /4...1 CN / /4 CN CN /4 * CN / /4 Bulkhead Elbow 45 deg. M/M JIC x JIC P/Number... Thread C /16 x 7/16 C /16 x 9/16 C /4 x 3/4 C /8 x 7/8 C /16 x 1-1/16 C /16 x 1-5/16 * C /8 x 1-5/8 P/Number... Thread C F... 7/16 x 7/16 C F... 1/2 x 1/2 C F... 9/16 x 9/16 C F... 3/4 x 3/4 C F... 3/4 x 7/8 C F... 7/8 x 3/4 C F... 7/8 x 7/8 C F...7/8 x 1-1/16 C F...1-1/16 x 7/8 C F...1-1/16 x 1-1/16 C F...1-5/16 x 1-5/16 C F...1-5/8 1-5/8 C F...1-7/8 x 1-7/8 C /2 x 2-1/2 90 deg Union M/F BSPT x BSPP P/Number... Thread CB F... 1/8 x 1/8 CB F... 1/4 x 1/4 CB F... 1/4 x 3/8 CB F... 3/8 x 1/4 CB F... 3/8 x 3/8 CB F... 3/8 x 1/2 CB F... 1/2 x 3/8 CB F... 1/2 x 1/2 CB F... 3/4 x 1/2 CB F... 3/4 x 3/4 CB F... 1 x 1 CB /4 x 1-1/4 CB /2 x 1-1/2 CB x 2 90 deg Union M/F BSPP x BSPP P/Number... Thread CP F... 1/4 x 1/4 CP F... 3/8 x 3/8 CP F... 1/2 x 1/2 CP F... 3/4 x 3/4 CP F... 3/4 x 1 CP F... 1 x 1 P/Number...Thread CN /8 x 1/8 CN F...1/4 x 1/4 CN F...3/8 x 3/8 CN F...1/2 x 1/2 CN F...3/4 x 3/4 CN F... 1 x 1 90 deg Union M/F ORFS x ORFS P/Number...Thread F F...9/16 x 9/16 F F...11/16 x 11/16 F F...13/16 x 13/16 F F... 1 x 1 F F /16 x 1-3/16 F F /16 x 1-7/16 90 deg Union M/F S.A.E. O Ring Boss x JIC P/Number...Thread C F...7/16 x 7/16 C F...9/16 x 9/16 C F...3/4 x 9/16 C F...3/4 x 3/4 C F...7/8 x 3/4 C F...7/8 x 7/8 C F /16 x 1-1/16 C F /16 x 1-5/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

115 *Manufactured To Order (minimum qtys may apply) 90 deg Union M/F S.A.E. O Ring Boss x BSPP Section 4 Adaptors 90 deg Elbow M/M SAE O-Ring Boss x SAE O-Ring Boss 90 deg Elbow M/M BSPP x BSPT P/Number... Thread CB F... 9/16 x 1/4 CB F... 9/16 x 3/8 CB F... 3/4 x 3/8 CB F... 3/4 x 1/2 CB F... 7/8 x 1/2 CB F...1-1/16 x 3/4 CB F...1-5/16 x 1 90 deg Union M/F S.A.E. O Ring Boss x NPSM P/Number... Thread * CN /16 x 1/4 * CN /4 x 3/8 * CN /4 x 1/2 * CN /8 x 1/2 * CN /16 x 3/4 * CN /16 x 1 * CN /8 x 1-1/4 90 deg Elbow F/F BSPT x JIC P/Number... Thread CB F... 1/8 x 9/16 CB F...3/4 x 1-1/16 P/Number...Thread ZC F...9/16 x 9/16 ZC /4 x 3/4 ZC /8 x 3/4 ZC /16 x 1-1/16 90 deg Elbow M/M BSPT x BSPT P/Number...Thread CB F...1/8 x 1/8 CB F...1/4 x 1/8 CB F...1/4 x 1/4 CB F...3/8 x 1/4 CB F...3/8 x 3/8 CB F...1/2 x 1/4 CB F...1/2 x 3/8 CB F...1/2 x 1/2 CB F...3/4 x 1/2 CB F...3/4 x 3/4 CB F...1 x 3/4 CB F... 1 x 1 CB F /4 x 3/4 CB F...1-1/4 x 1 CB F /4 x 1-1/4 CB F /2 x 1-1/2 CB x 2 90 deg Elbow M/M BSPT Swivel x BSPT P/Number...Thread CBS /8 x 3/8 CBS /2 x 1/2 CBS /4 x 1/2 * CBS /4 x 3/4 P/Number... Thread CPB F...1/4 x 1/4 CPB F...1/4 x 3/8 CPB F...3/8 x 1/4 CPB F...3/8 x 3/8 CPB F...3/8 x 1/2 CPB F...1/2 x 3/8 CPB F...1/2 x 1/2 CPB F...1 2/ x 3/4 CPB F...3/4 x 3/4 CPB F...1 x 3/4 CPB F...1 x 1 CPB F...1-1/4 x 1-1/4 CPB F...1-1/2 x 1-1/2 90 deg Elbow M/M BSPP Swivel x BSPT P/Number... Thread CPBS /8 x 3/8 CPBS /2 x 1/2 CPBS /4 x 1/2 90 deg Elbow M/M ORFS x ORFS P/Number... Thread F /16 x 9/16 F /16 x 11/16 F /16 x 13/16 F x 1 F /16 x 1-3/16 F /16 x 1-7/16 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.23

116 90 deg Elbow M/M NPTF x NPTF Section 4 Adaptors 90 deg Elbow M/F NPTF x NPTF *Manufactured To Order (minimum qtys may apply) 90 deg Elbow F/F NPTF x NPTF P/Number... Thread CN F...1/8 x 1/8 CN F...1/4 x 1/4 CN /8 x 1/4 CN F...3/8 x 3/8 * CN /2 x 1/4 CN F...1/2 x 3/8 CN F...1/2 x 1/2 CN F...3/4 x 1/2 CN F...3/4 x 3/4 CN F...1 x 3/4 CN F...1 x 1 CN F...1-1/4 x 1-1/4 CN F...1-1/2 x 1-1/2 CN x 2 90 deg Elbow M/M BSPP x BSPP P/Number... Thread * CP /4 x 1/4 CP /8 x 3/8 * CP /2 x 1/2 90 deg Elbow M/F BSPT x BSPT P/Number... Thread CB F...1/8 x 1/8 CB F...1/8 x 1/4 CB F...1/4 x 1/4 CB F...3/8 x 3/8 CB F...3/8 x 1/2 CB F...1/2 x 3/8 CB F...1/2 x 1/2 CB F...1/2 x 3/4 CB F...3/4 x 1/2 CB F...3/4 x 3/4 CB F...1 x 1 CB F...1-1/4 x 1-1/4 CB /2 x 1-1/2 CB x 2 P/Number... Thread CN F... 1/8 x 1/8 CN F... 1/8 x 1/4 CN F... 1/4 x 1/4 CN F... 1/4 x 3/8 CN F... 3/8 x 3/8 CN F... 1/2 x 3/8 CN F... 1/2 x 1/2 CN F... 3/4 x 3/4 * CN F... 3/4 x 1 CN F... 1 x 1 CN F...1-1/4 x 1-1/4 CN /2 x 1-1/2 CN x 2 90 deg Elbow M/F BSPP x SAE O Ring P/Number... Thread CPU F... 3/8 x 9/16 90 deg Elbow M/F SAE O Ring Boss x SAE O Ring P/Number... Thread CU F... 9/16 x 9/16 CU F... 3/4 x 9/16 90 deg Elbow F/F BSPT x BSPT P/Number... Thread CB F... 1/8 x 1/8 CB F... 1/4 x 1/4 CB F... 3/8 x 3/8 CB F... 1/2 x 3/8 CB F... 1/2 x 1/2 CB F... 3/4 x 1/2 CB F... 3/4 x 3/4 CB F... 1 x 1 CB F...1-1/4 x 1-1/4 CB /2 x 1-1/2 P/Number...Thread CN F...1/8 x 1/8 CN F...1/4 x 1/4 CN F...3/8 x 3/8 CN /2 x 3/8 CN F...1/2 x 1/2 CN /4 x 1/2 CN F...3/4 x 3/4 CN F... 1 x 1 CN F /4 x 1-1/4 * CN /2 x 1-1/2 90 deg Elbow M/M BSPT x JIC P/Number...Thread * CB F...1/8 x 3/8 CB F...1/8 x 7/16 CB F...1/8 x 1/2 CB F...1/8 x 9/16 CB F...1/4 x 7/16 CB F...1/4 x 1/2 CB F...1/4 x 9/16 CB F...1/4 x 3/4 CB F...3/8 x 7/16 CB F...3/8 x 9/16 CB F...3/8 x 3/4 CB F...3/8 x 7/8 CB F...1/2 x 7/16 CB F...1/2 x 9/16 CB F...1/2 x 3/4 CB F...1/2 x 7/8 CB F...1/2 x 1-1/16 CB F...3/4 x 9/16 CB F...3/4 x 3/4 CB F...3/4 x 7/8 CB F...3/4 x 1-1/16 CB F...3/4 x 1-5/16 CB F...1 x 3/4 CB F...1 x 7/8 CB F...1 x 1-1/16 CB F...1 x 1-5/16 CB F...1 x 1-5/8 CB F /4 x 1-1/16 CB F /4 x 1-5/16 CB F /4 x 1-5/8 CB /4 x 1-7/8 CB F /2 x 1-5/8 CB F /2 x 1-7/8 * CB /2 x 2-1/2 * CB x 1-7/8 CB x 2-1/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

117 *Manufactured To Order (minimum qtys may apply) 90 deg Elbow M/M BSPT x JIS Section 4 Adaptors 90 deg Elbow M/M Metric x JIC 90 deg Elbow M/M BSPP x ORFS P/Number... Thread CBJ F... 1/4 x 1/4 CBJ /8 x 3/8 CBJ /2 x 1/2 CBJ /4 x 3/4 CBJ x 1 90 deg Elbow M/M BSPP x JIC P/Number...Thread CM F... M12x1.5 x 7/16 CM F... M14x1.5 x 9/16 CM F... M16x1.5 x 9/16 CM F... M18x1.5 x 9/16 CM F... M18x1.5 x 3/4 CM M22x1.5 x 3/4 90 deg Elbow M/M NPTF x JIC P/Number... Thread FP F...1/2 x 11/16 FP F...1/2 x 13/16 FP F...1/2 x 1 FP F... 1/2 x 1-3/16 FP F...3/4 x 13/16 FP F...3/4 x 1 90 deg Elbow M/M BSPT Extended x JIC P/Number... Thread CP F... 1/8 x 7/16 CP F... 1/8 x 9/16 CP F... 1/4 x 7/16 CP F... 1/4 x 9/16 CP F... 1/4 x 3/4 CP F... 3/8 x 7/16 CP F... 3/8 x 9/16 CP F... 3/8 x 3/4 CP F... 3/8 x 7/8 CP F... 1/2 x 9/16 CP F... 1/2 x 3/4 CP F... 1/2 x 7/8 CP F...1/2 x 1-1/16 CP F...1/2 x 1-5/16 CP F... 3/4 x 3/4 CP F... 3/4 x 7/8 CP F...3/4 x 1-1/16 CP F...3/4 x 1-5/16 CP F...1 x 1-1/16 CP F...1 x 1-5/16 CP F...1 x 1-5/8 CP F /4 x 1-1/16 CP F /4 x 1-5/16 CP F /4 x 1-5/8 CP F /4 x 1-7/8 CP F /2 x 1-5/16 CP F /2 x 1-5/8 CP F /2 x 1-7/8 CP x 2-1/2 P/Number...Thread CN F...1/8 x 7/16 CN F...1/8 x 1/2 CN F...1/8 x 9/16 CN F...1/4 x 7/16 CN /4 x 1/2 CN F...1/4 x 9/16 CN F...1/4 x 3/4 CN F...3/8 x 7/16 CN F...3/8 x 9/16 CN F...3/8 x 3/4 CN F...3/8 x 7/8 * CN /8 x 1-1/16 CN F...1/2 x 7/16 CN F...1/2 x 9/16 CN F...1/2 x 3/4 CN F...1/2 x 7/8 CN F... 1/2 x 1-1/16 CN F...3/4 x 7/16 CN F...3/4 x 9/16 CN F...3/4 x 3/4 CN F...3/4 x 7/8 CN F... 3/4 x 1-1/16 CN F... 3/4 x 1-5/16 CN F...1 x 1-1/16 CN F...1 x 1-5/16 CN F...1 x 1-5/8 CN F /4 x 1-1/16 CN F /4 x 1-5/16 CN F /4 x 1-5/8 CN F /4 x 1-7/8 CN F /2 x 1-5/8 CN /2 x 1-7/8 CN x 2-1/2 P/Number... Thread CB /8 x 7/16 CB /4 x 7/16 CB /4 x 9/16 CB /8 x 9/16 CB /8 x 3/4 CB /2 x 3/4 CB /2 x 7/8 * CB /4 x 1-1/16 CB x 1-5/16 90 deg Elbow M/M BSPT Swivel x JIC P/Number... Thread CBS /4 x 7/16 CBS /8 x 3/4 CBS /2 x 3/4 CBS /2 x 7/8 * CBS /2 x 1-1/16 CBS /4 x 1-1/16 CBS /4 x 1-5/16 * CBS x 1-5/16 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.25

118 90 deg Elbow M/M BSPP Extended x JIC Section 4 Adaptors 90 deg Elbow M/M JIC x JIC *Manufactured To Order (minimum qtys may apply) 90 deg Elbow M/M S.A.E. O Ring Boss x JIC P/Number... Thread CP /8 x 3/4 CP /2 x 7/8 * CP /4 x 1-1/16 * CP /4 x 1-5/16 * CP x 1-5/16 90 deg Elbow M/M NPTF Extended x JIC P/Number... Thread CN /8 x 7/16 * CN /8 x 9/16 CN /4 x 7/16 * CN /4 x 9/16 CN /8 x 9/16 * CN /8 x 3/4 * CN /2 x 3/4 CN /2 x 7/8 * CN /4 x 3/4 * CN /4 x 1-1/16 * CN x 1-5/16 P/Number... Thread C /8 x 3/8 C F... 7/16 x 7/16 C F... 1/2 x 1/2 C /16 x 1/2 C F... 9/16 x 9/16 C F... 3/4 x 9/16 C F... 3/4 x 3/4 C F... 7/8 x 3/4 C F... 7/8 x 7/8 C F...1-1/16 x 3/4 C F...1-1/16 x 7/8 C F...1-1/16 x 1-1/16 C F...1-5/16 x 1-1/16 C F...1-5/16 x 1-5/16 C F...1-5/8 x 1-5/8 C F...1-7/8 x 1-7/8 90 deg Elbow F/M BSPT x JIC P/Number... Thread CB F... 1/4 x 7/16 CB F... 1/4 x 9/16 CB F... 3/8 x 9/16 CB F... 3/8 x 3/4 CB F... 3/8 x 7/8 CB F... 1/2 x 3/4 CB F... 1/2 x 7/8 CB F...3/4 x 1-1/16 CB F...1 x 1-5/16 90 deg Elbow F/M NPTF x JIC P/Number...Thread C F...7/16 x 7/16 C F...7/16 x 1/2 C F...7/16 x 9/16 C /16 x 3/4 C F...1/2 x 7/16 C F...1/2 x 1/2 C F...1/2 x 9/16 C F...9/16 x 7/16 C F...9/16 x 1/2 C F...9/16 x 9/16 C F...9/16 x 3/4 C F...3/4 x 7/16 C F...3/4 x 1/2 C F...3/4 x 9/16 C F...3/4 x 3/4 C F...3/4 x 7/8 C F...3/4 x 1-1/16 C /4 x 1-5/16 C F...7/8 x 9/16 C F...7/8 x 3/4 C F...7/8 x 7/8 C F...7/8 x 1-1/16 C F...7/8 x 1-5/16 C F...1-1/16 x 9/16 C F...1-1/16 x 3/4 C F...1-1/16 x 7/8 C F /16 x 1-1/16 C F /16 x 1-5/16 C F /16 x 1-1/16 C F /16 x 1-5/16 C F /16 x 1-5/8 C F /8 x 1-5/16 C F /8 x 1-5/8 C /8 x 1-7/8 C F /8 x 1-5/16 C /8 x 1-5/8 C /8 x 1-7/8 C /2 x 2-1/2 P/Number... Thread * CN F... 1/8 x 7/16 CN F... 1/4 x 7/16 CN F... 1/4 x 9/16 * CN /8 x 3/4 CN F... 1/2 x 3/4 * CN /4 x 1-1/16 * CN x 1-5/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

119 *Manufactured To Order (minimum qtys may apply) 90 deg Elbow M/M S.A.E. O Ring Boss x ORFS Section 4 Adaptors 90 deg Elbow M/M S.A.E. O Ring Boss Ext. Swivel x JIC 90 deg Elbow M/M S.A.E. O Ring Boss x NPTF P/Number... Thread F F... 7/16 x 9/16 F F... 9/16 x 9/16 F F... 9/16 x 11/16 F F... 3/4 x 11/16 F F... 3/4 x 13/16 F F... 7/8 x 1 F F /16 x 1-3/16 F F /16 x 1-7/16 90 deg Elbow M/M S.A.E. O Ring Boss Swivel x JIC P/Number...Thread CES /4 x 3/4 * CES /4 x 7/8 CES /8 x 3/4 * CES /8 x 7/8 90 deg Elbow M/M SAE O-Ring Boss x JIC Orifice Elbow 0.9mm P/Number... Thread CN /16 x 1/4 CN /16 x 3/8 CN /4 x 3/8 * CN /4 x 1/2 * CN /4 x 3/4 * CN /8 x 1/2 CN /8 x 3/4 Clamp-on 90 deg Elbow M/M S.A.E. O Ring Boss x Tail P/Number... Thread CS /4 x 3/4 CS /4 x 7/8 CS /8 x 3/4 CS /8 x 7/8 * CS /8 x 1-1/16 CS /16 x 1-1/16 90 deg Elbow M/M S.A.E. O Ring Boss Ext. x JIC P/Number... Thread CE /16 x 9/16 CE /16 x 3/4 CE /4 x 9/16 CE /4 x 3/4 CE /4 x 7/8 CE /8 x 9/16 CE /8 x 3/4 CE /8 x 7/8 CE /8 x 1-1/16 CE /16 x 1-1/16 P/Number...Thread ZC /16 x 9/16 90 deg Elbow M/M S.A.E. O Ring Boss x BSPT P/Number...Thread CB F...7/16 x 1/4 CB F...9/16 x 1/4 CB F...9/16 x 3/8 CB F...3/4 x 1/4 CB F...3/4 x 3/8 CB F...3/4 x 1/2 CB F...3/4 x 3/4 CB F...7/8 x 1/4 CB F...7/8 x 3/8 CB F...7/8 x 1/2 CB F...7/8 x 3/4 CB F /16 x 1/2 CB F /16 x 3/4 CB /16 x 1 CB F /16 x 3/4 CB F...1-5/16 x 1 P/Number...Thread...Hose * C /16...5/16 * C /16...3/8 * C /16...1/2 C /4...1/2 * C /4...5/8 C /4...3/4 C /8...3/4 * C /8...1 C / /4 * C /16...5/8 C /16...3/4 C / C / /4 * C / /2 C /16...3/4 C / C / /4 C / /2 C / /4 C / /2 C / /2 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.27

120 Section 4 Adaptors *Manufactured To Order (minimum qtys may apply) Clamp-on 90 deg Elbow M/M BSPT x Tail Clamp-on 90 deg Elbow M/M NPTF x Tail 90 deg Elbow M/M SAE x SAE Bulkhead P/Number...Thread...Hose CB /8...1/4 * CB /4...1/4 * CB /4...5/16 CB /4...3/8 * CB /8...3/8 * CB /8...1/2 CB /8...5/8 CB /8...3/4 CB /2...3/8 CB /2...1/2 * CB /2...5/8 CB /2...3/4 * CB /4...1/2 CB /4...3/4 CB /4...1 CB / /4 CB /4 CB CB /4 CB /2 * CB /4...3/4 CB /4...1 CB / /4 CB / /2 CB /4...2 CB / /4 CB / /2 CB /2...2 CB Clamp-on 90 deg Elbow M/M BSPP x Tail P/Number...Thread...Hose CP /8...1/2 CP /8...1/2 CP /2... 3/4 CP / CP /4...3/4 CP /4...1 CP / /4 CP /4 CP CP /4 CP /2 CP CP /4...1 CP / /4 CP / /2 CP /4...2 CP / /2 CP /2...2 P/Number... Thread... Hose CN /4... 1/4 CN /4... 3/8 * CN /4... 1/2 CN /4... 5/8 CN /8... 3/8 CN /8... 1/2 * CN /8... 5/8 CN /8... 3/4 * CN /2... 1/2 CN /2... 3/4 * CN /4... 3/4 CN / /4 CN * CN /4 * CN /2 CN / /4 CN / /2 CN / /2 * CN / deg Elbow M/M JIC x JIC Bulkhead P/Number... Thread C /16 x 7/16 * C /2 x 1/2 C /16 x 9/16 C /4 x 3/4 C /8 x 7/8 C /16 x 1-1/16 C /16 x 1-5/16 C /8 x 1-5/8 C /8 x 1-7/8 P/Number...Thread CA /8 x 5/8 CA /4 x 3/4 CA /8 x 7/8 Tee M/M/F BSPT x BSPT x BSPP P/Number...Thread CB F...1/4 x 1/4 x 1/4 CB F...3/8 x 3/8 x 3/8 CB F...1/2 x 1/2 x 1/2 CB F...3/4 x 3/4 x 3/4 CB F... 1 x 1 x 1 Tee M/M/F ORFS x ORFS x ORFS P/Number...Thread * F F...9/16 x 9/16 x 9/16 * F F...11/16 x 11/16 x 11/16 * F F...13/16 x 13/16 x 13/16 * F F... 1 x 1 x 1 * F F..1-3/16 x 1-3/16 x 1-3/16 Tee M/M/M BSPT x BSPT x BSPT P/Number...Thread CB F...1/8 x 1/8 x 1/8 CB F...1/4 x 1/4 x 1/4 CB F...3/8 x 3/8 x 3/8 CB F...1/2 x 1/2 x 1/2 CB F...3/4 X 3/4 X 1/2 CB F...3/4 x 3/4 x 3/4 CB F... 1 x 1 x 1 CB /4 x 1-1/4 x 1-1/4 CB /2 x 1-1/2 x 1-1/2 CB x 2 x For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

121 *Manufactured To Order (minimum qtys may apply) Tee M/M/M NPTF x NPTF x NPTF Section 4 Adaptors Tee M/M/M ORFS x ORFS x ORFS Tee F/M/M JIC x JIC x JIC P/Number... Thread CN /8 x 1/8 x 1/8 CN F... 1/4 x 1/4 x 1/4 CN F... 3/8 x 3/8 x 3.8 CN F... 1/2 x 1/2 x 1/2 CN F... 3/4 x 3/4 x 3/4 * CN x 1 x 1 Tee M/M/M BSPP x BSPP x JIC P/Number... Thread * ZCP /2 x 1/2 x 7/8 Tee M/M/M JIC x JIC x JIC P/Number... Thread C F... 7/16 x 7/16 x 7/16 C F... 1/2 x 1/2 x 1/2 C F... 9/16 x 9/16 x 9/16 C F... 3/4 X 3/4 X 9/16 C F... 3/4 x 9/16 x 3/4 C F... 3/4 x 3/4 x 3/4 C F... 3/4 x 3/4 x 7/8 C F...3/4 x 3/4 x 1-1/16 C F... 7/8 x 3/4 x 7/8 * C F... 7/8 x 3/4 x 7/8 C F... 7/8 x 7/8 x 7/8 C F...7/8 x 7/8 x 1-1/16 C F...1-1/16 x 7/8 x 7/8 C /16 x 7/8 x 1-1/16 C F /16 x 1-1/16 x 3/4 C F /16 x 1-1/16 x 7/8 C F. 1-1/16 x 1-1/16 x 1-1/16 C F /16 x 1-5/16 x 7/8 C F. 1-5/16 x 1-5/16 x 1-1/16 C F. 1-5/16 x 1-5/16 x 1-5/16 C F /8 x 1-5/8 x 1-5/8 C /8 x 1-7/8 x 1-7/8 C /2 x 2-1/2 x 2-1/2 P/Number...Thread F F...9/16 x 9/16 x 9/16 F F...11/16 x 11/16 x 11/16 F F...13/16 x 13/16 x 13/16 F F... 1 x 1 x 1 F F..1-3/16 x 1-3/16 x 1-3/16 F /16 x 1-7/16 x 1-7/16 Tee F/F/F BSPT x BSPT x BSPT P/Number...Thread CB F...1/8 x 1/8 x 1/8 CB F...1/4 x 1/4 x 1/4 CB F...3/8 x 3/8 x 3/8 CB F...1/2 x 1/2 x 1/2 CB F...3/4 x 3/4 x 3/4 CB x 1 x 1 CB /4 x 1-1/4 x 1-1/4 CB /2 x 1-1/2 x 1-1/2 CB x 2 x 2 Tee F/F/F NPTF x NPTF x NPTF P/Number...Thread CN F...1/8 x 1/8 x 1/8 CN F...1/4 x 1/4 x 1/4 CN F...3/8 x 3/8 x 3/8 CN F...1/2 x 1/2 x 1/2 CN F...3/4 x 3/4 x 3/4 CN x 1 x 1 CN /4 x 1-1/4 x 1-1/4 CN /2 x 1-1/2 x 1-1/2 CN x 2 x 2 P/Number... Thread C F... 7/16 x 7/16 x 7/16 C F... 1/2 x 1/2 x 1/2 C F... 9/16 x 9/16 x 9/16 C F... 3/4 x 3/4 x 3/4 C F... 7/8 x 7/8 x 7/8 C F. 1-1/16 x 1-1/16 x 1-1/16 C F. 1-1/16 x 1-5/16 x 1-1/16 C F. 1-5/16 x 1-5/16 x 1-1/16 C F /16 x 1-5/16 x 1-5/1 C /8 x 1-5/8 x 1-5/8 C /8 x 1-7/8 x 1-7/8 C /2 x 2-1/2 x 2-1/2 Tee F/M/M ORFS x ORFS x ORFS P/Number... Thread F F... 9/16 x 9/16 x 9/16 F F... 11/16 x 11/16 x 11/16 F F... 13/16 x 13/16 x 13/16 F F...1 x 1 x 1 F F.. 1-3/16 x 1-3/16 x 1-3/16 F /16 x 1-7/16 x 1-7/16 Tee M/F/F BSPT x BSPT x BSPT P/Number... Thread CB F... 1/8 x 1/8 x 1/8 CB F... 1/4 x 1/4 x 1/4 CB F... 3/8 x 3/8 x 3/8 CB F... 1/2 x 1/2 x 1/2 CB F... 3/4 x 3/4 x 3/4 CB x 1 x 1 CB /4 x 1-1/4 x 1-1/4 CB /2 x 1-1/2 x 1-1/2 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.29

122 Tee M/F/F NPTF x NPTF x NPTF Section 4 Adaptors Tee M/M/M JIC x JIC x BSPT *Manufactured To Order (minimum qtys may apply) Tee M/M/M JIC x JIC x NPTF P/Number... Thread CN F... 1/8 x 1/8 x 1/8 CN F... 1/4 x 1/4 x 1/4 CN F... 3/8 x 3/8 x 3/8 CN F... 1/2 x 1/2 x 1/2 CN F... 3/4 x 3/4 x 3/4 CN x 1 x 1 CN /4 x 1-1/4 x 1-1/4 Tee M/M/F JIC x JIC x JIC P/Number... Thread C F... 7/16 x 7/16 x 7/16 * C /2 x 1/2 x 1/2 C F... 9/16 x 9/16 x 9/16 C F... 3/4 x 3/4 x 3/4 C F... 7/8 x 7/8 x 7/8 C F. 1-1/16 x 1-1/16 x 1-1/16 C F. 1-5/16 x 1-5/16 x 1-5/16 C /8 x 1-5/8 x 1-5/8 C /8 x 1-7/8 x 1-7/8 C /2 x 2-1/2 x 2-1/2 P/Number... Thread CB F... 7/16 x 7/16 x 1/8 CB F... 7/16 x 7/16 x 1/4 CB F... 9/16 x 9/16 x 1/4 CB F... 9/16 x 9/16 x 3/8 CB F... 3/4 x 3/4 x 1/4 CB F... 3/4 x 3/4 x 3/8 CB F... 3/4 x 3/4 x 1/2 CB F... 3/4 x 3/4 x 3/4 CB F... 7/8 x 7/8 x 3/8 CB F... 7/8 x 7/8 x 1/2 CB F... 7/8 x 7/8 x 3/4 CB F /16 x 1-1/16 x 3/4 CB F...1-5/16 x 1-5/16 x 1 CB /8 x 1-5/8 x 1-1/4 CB /8 x 1-7/8 x 1-1/2 Tee M/M/M JIC x JIC x BSPP P/Number... Thread CP F... 9/16 x 9/16 x 1/4 CP F... 9/16 x 9/16 x 1/4 CP F... 9/16 x 9/16 x 3/8 CP F... 9/16 x 9/16 x 1/2 CP F... 3/4 x 3/4 x 3/8 CP F... 3/4 x 3/4 x 1/2 CP F... 7/8 x 7/8 x 1/2 CP F... 7/8 x 7/8 x 3/4 CP F /16 x 1-1/16 x 3/4 CP F...1-5/16 x 1-5/16 x 1 Tee M/M/M BSPT X BSPP X BSPT P/Number...Thread CN F...7/16 x 7/16 x 1/8 CN F...7/16 x 7/16 x 1/4 CN /2 x 1/2 x 1/4 CN F...9/16 x 9/16 x 1/4 CN F...9/16 x 9/16 x 3/8 CN F...3/4 x 3/4 x 3/8 CN F...3/4 x 3/4 x 1/2 CN F...7/8 x 7/8 x 1/2 CN F...7/8 x 7/8 x 3/4 CN F /16 x 1-1/16 x 1/2 * CN /16 x 1-1/16 x 3/4 CN /16 x 1-5/16 x 1 Tee F/F/M BSPP x BSPP x BSPT P/Number...Thread CBS /4 x 1/4 x 1/4 CBS /8 x 3/8 x 3/8 CBS /2 x 1/2 x 1/2 Tee F/F/M NPTF x NPTF x NPTF P/Number...Thread CN F...1/8 x 1/8 x 1/8 CN F...1/4 x 1/4 x 1/4 CN F...3/8 x 3/8 x 3/8 CN F...1/2 x 1/2 x 1/2 CN F...3/4 x 3/4 x 3/4 * CN x 1 x 1 * CN /4 x 1-1/4 x 1-1/4 Tee M/M/M JIC x BSPT x JIC P/Number... Thread * CBP F... 1/4 x 1/4 x 1/4 * CBP F... 3/4 x 3/4 x 3/4 P/Number...Thread CB F...7/16 x 1/8 x 7/16 CB F...7/16 x 1/4 x 7/16 CB F...9/16 x 1/4 x 9/16 CB F...9/16 x 3/8 x 9/16 CB F...3/4 x 3/8 x 3/4 CB F...3/4 x 1/2 x 3/4 CB F...7/8 x 1/2 x 7/8 CB F /16 x 3/4 x 1-1/16 CB F /16 x 1 x 1-5/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

123 *Manufactured To Order (minimum qtys may apply) Tee M/M/M JIC x BSPP x JIC Section 4 Adaptors Tee M/M/M S.A.E. O Ring Boss x JIC x JIC Tee M/M/M JIC x JIC x JIC Bulkhead P/Number... Thread CP F... 7/16 x 1/4 x 7/16 CP F... 9/16 x 1/4 x 9/16 CP F... 9/16 x 3/8 x 9/16 CP F... 3/4 x 3/8 x 3/4 CP F... 3/4 x 1/2 x 3/4 CP F... 7/8 x 1/2 x 7/8 * CP /16 x 1/2 x 1-1/16 CP F /16 x 3/4 x 1-1/16 CP F /16 x 1 x 1-5/16 * CP /8 x 1-1/4 x 1-5/8 * CP /8 x 1-1/2 x 1-5/8 * CP /8 x 1-1/2 x 1-7/8 Tee M/M/M JIC x NPT x JIC P/Number...Thread C F...7/16 x 7/16 x 7/16 C F...1/2 x 1/2 x 1/2 C F...9/16 x 9/16 x 9/16 C F...3/4 x 9/16 x 9/16 C F...3/4 x 3/4 x 3/4 C F...7/8 x 3/4 x 3/4 C F...7/8 x 7/8 x 7/8 C F... 7/8 x 1-1/16 x 1-1/16 C F /16 x 7/8 x 7/8 C /16 x 1-1/16 x 1-1/16 C F..1-1/16 x 1-1/16 x 1-1/16 * C /16 x 1-1/16 x 1-1/16 C F..1-5/16 x 1-5/16 x 1-5/16 P/Number... Thread C /16 x 7/16 x 7/16 C /16 x 9/16 x 9/16 C /4 x 3/4 x 3/4 C /8 x 7/8 x 7/8 C /16 x 1-1/16 x 1-1/16 C /16 x 1-5/16 x 1-5/16 * C /8 x 1-5/8 x 1-5/8 Tee M/M/M JIC x JIC Bulkhead x JIC P/Number... Thread CN F... 7/16 x 1/8 x 7/16 * CN /16 x 1/4 x 7/16 CN /2 x 1/8 x 1/2 CN /2 x 1/4 x 1/2 CN F... 9/16 x 1/4 x 9/16 * CN F... 9/16 x 3/8 x 9/16 CN F... 3/4 x 3/8 x 3/4 CN F... 3/4 x 1/2 x 3/4 CN F... 7/8 x 1/2 x 7/8 CN F /16 x 3/4 x 1-1/16 CN F /16 x 1 x 1-5/16 Tee M/M/M JIC x JIC x S.A.E. O Ring Boss Tee F/M/M BSPP x BSPT x BSPT P/Number...Thread CB F...1/4 x 1/4 x 1/4 CB F...3/8 x 3/8 x 3/8 CB F...1/2 x 1/2 x 1/2 CB F...3/4 x 3/4 x 1/4 CB F...3/4 x 3/4 x 3/4 CB F... 1 x 1 x 1 CB /4 x 1-1/4 x 1-1/4 P/Number... Thread C /16 x 7/16 x 7/16 C /16 x 9/16 x 9/16 C /4 x 3/4 x 3/4 C /8 x 7/8 x 7/8 C /16 x 1-1/16 x 1-1/16 C /16 x 1-5/16 x 1-5/16 * C /8 x 1-5/8 x 1-5/8 Tee M/M/M JIC x JIC Bulkhead x BSPP P/Number... Thread C F... 7/16 x 7/16 x 7/16 C F... 9/16 x 9/16 x 7/16 C F... 9/16 x 9/16 x 9/16 C F... 9/16 x 9/16 x 3/4 C F... 3/4 x 3/4 x 9/16 C F... 3/4 x 3/4 x 3/4 C /8 x 3/4 x 7/8 C F... 7/8 x 7/8 x 3/4 C F... 7/8 x 7/8 x 7/8 C F /16 x 1-1/16 x 1-1/6 * C /16 x 1-5/16 x 1-1/16 C /16 x 1-5/16 x 1-5/16 * C /8 x 1-5/8 x 1-5/8 P/Number... Thread ZCP /16 x 9/16 x 1/4 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.31

124 Cross M/M/M/M 4 x JIC Section 4 Adaptors Reducing Bush M/F BSPT x BSPT *Manufactured To Order (minimum qtys may apply) Reducing Bush M/F BSPP x BSPP Style A P/Number... Thread C72-07X4...7/16 C72-09X4...9/16 C72-12X4...3/4 C72-14X4...7/8 C72-17X /16 * C72-21X /16 Cross M/M/M/M 4 x ORFX P/Number... Thread F72-11X4...11/16 Cross F/F/F/F 4 x BSPT P/Number... Thread CB72-04X4...1/4 CB72-06X4...3/8 CB72-08X4...1/2 CB72-12X4...3/4 CB72-16X4...1 Cross F/F/F/F 4 x NPTF P/Number... Thread CB /4 x 1/8 CB /8 x 1/8 CB /8 x 1/4 CB /2 x 1/8 CB /2 x 1/4 CB /2 x 3/8 CB /4 x 1/4 CB /4 x 3/8 CB /4 x 1/2 CB x 3/8 CB x 1/2 CB x 3/4 CB /4 x 1/2 CB /4 x 3/4 CB /4 x 1 CB /2 x 3/4 CB /2 x 1 CB /2 x 1-1/4 CB x 1 CB x 1-1/4 CB x 1-1/2 Reducing Bush M/F BSPP x BSPP Encapsulated Seal P/Number... Thread CR /8 x 1/4 CR x 1/2 CR x 3/4 CR /4 x 1 CR /2 x 1 CR /2 x 1-1/4 P/Number...Thread1/4 x 1/8 CP /8 x 1/8 CP /8 x 1/4 CP /2 x 1/4 CP /2 x 3/8 CP /4 x 3/8 CP /4 x 1/2 CP x 3/4 CP /4 x 1 CP /2 x 1 CP /2 x 1-1/4 CP x 1-1/2 Reducing Bush M/F BSPP x BSPP Style B P/Number...Thread CP /4 x 1/4 CP x 1/2 CP /4 x 3/4 * CP x 3/4 * CP x 1 CP x 1-1/4 Reducing Bush M/F BSPP x BSPT Style A P/Number...Thread CPB /2 x 1-1/4 P/Number... Thread * CN72-02X4...1/8 CN72-04X4...1/4 CN72-06X4...3/8 CN72-08X4...1/2 * CN72-12X4...3/4 * CN72-16X For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

125 *Manufactured To Order (minimum qtys may apply) Reducing Bush M/F BSPP x BSPT Style B Section 4 Adaptors Reducing Bush M/F S.A.E. O Ring Boss x S.A.E. O Ring Boss Reducing Bush M/F S.A.E. O Ring Boss x NPTF Style A P/Number... Thread * CPB /2 x 1/4 * CPB /4 x 3/8 * CPB /4 x 3/4 * CPB /2 x 3/4 * CPB /2 x 1 * CPB /2 x 1-1/4 Reducing Bush M/F NPTF x NPTF P/Number...Thread C /16 x 1/2 C /4 x 9/16 C /8 x 9/16 C /16 x 9/16 C /16 x 3/4 C /16 x 3/4 C /16 x 7/8 C /16 x 1-1/16 * C /8 x 3/4 C /8 x 1-1/16 C /8 x 1-5/16 C /8 x 1-1/16 * C /8 x 1-5/16 P/Number... Thread * CN /16 x 1/2 * CN /16 x 1/2 * CN /16 x 3/4 Reducing Bush M/F S.A.E. O Ring Boss x NPTF Style B P/Number... Thread CN /4 x 1/8 CN /8 x 1/8 CN /8 x 1/4 CN /2 x 1/8 CN /2 x 1/4 CN /2 x 3/8 CN /4 x 1/8 CN /4 x 1/4 CN /4 x 3/8 CN /4 x 1/2 * CN x 3/8 CN x 1/2 CN x 3/4 * CN /4 x 1/2 CN /4 x 3/4 CN /4 x 1 CN /2 x 3/4 CN /2 x 1 CN /2 x 1-1/4 * CN x 3/4 CN x 1 CN x 1-1/4 CN x 1-1/2 2-1/2 x 1-1/4 Reducing Bush M/F S.A.E. O Ring Boss x BSPT P/Number...Thread * CB /4 x 1/8 CB /4 x 1/8 CB /4 x 1/4 CB /8 x 1/8 CB /8 x 1/4 * CB /8 x 3/8 CB /16 x 1/4 CB /16 x 3/8 * CB /16 x 1/2 CB /16 x 1/4 CB /16 x 3/8 CB /16 x 1/2 CB /16 x 3/4 * CB /8 x 3/4 * CB /8 x 1 P/Number... Thread * CN /4 x 1/8 CN /4 x 1/4 CN /8 x 1/8 * CN /8 x 1/4 * CN /16 x 1/4 CN /16 x 3/8 CN /16 x 1/2 Plug S.A.E. O Ring Boss P/Number... Thread C /8 C /16 C /2 C /16 C /4 C /8 C /16 C /16 C /16 C /8 C /8 C /2 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.33

126 Plug S.A.E. O Ring Boss Socket Head Section 4 Adaptors Plug BSPP *Manufactured To Order (minimum qtys may apply) Plug JIC P/Number... Thread C77S /16 C77S /8 C77S /16 C77S /2 C77S /16 C77S /4 C77S /8 C77S /16 Plug BSPT P/Number... Thread CP /8 CP /4 CP /8 CP /2 CP /4 CP CP /4 CP /2 CP Plug BSPP Socket Head P/Number...Thread C /16 C /2 C /16 C /4 C /8 C /16 C /16 C /16 C /8 C /8 C /2 Plug ORFS P/Number... Thread CB /8 CB /4 CB /8 CB /2 CB /4 CB CB /4 CB /2 CB * CB /2 Plug BSPP Encapsulated Seal P/Number... Thread CR /8 CR /4 CR /8 CR /2 CR /4 CR CR /4 CR /2 P/Number... Thread CR77S /8 CR77S /4 CR77S /8 CR77S /2 CR77S /4 CR77S Plug NPTF P/Number... Thread CN /8 CN /4 CN /8 CN /2 CN /4 CN CN /4 CN /2 CN /2 Plug Metric 1.5mm Pitch P/Number... Thread CM CM CM CM CM CM CM P/Number...Thread F /16 F /16 F /16 F F /16 F /16 F /16 Plug Metric Komatsu 1.5mm Pitch P/Number...Thread CK CK CK CK CK CK CK CK CK CK CK Cap Nut JIC P/Number...Thread C /16 C /2 C /16 C /4 C /8 C /16 C /16 C /16 C /8 C /8 C / For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

127 *Manufactured To Order (minimum qtys may apply) Cap Nut BSPP Section 4 Adaptors Bulkhead Nut JIC Tube Nut & Sleeve Assembly JIC (Nut C83-**N. Sleeve C83-**S) P/Number... Thread CBS /8 CBS /4 CBS /8 CBS /2 * CBS /8 CBS /4 CBS CBS /4 CBS /2 CBS Cap Nut ORFS P/Number...Thread C /16 C /2 C /16 C /4 C /8 C /16 C /16 C /16 C /8 C /8 C /2 Bulkhead Nut BSPP P/Number...(Tube)... Thread C (1/4)...7/16 C (5/16)...1/2 C (3/8)...9/16 C (1/2)...3/4 C (5/8)...7/8 C (3/4) /16 C (7/8) /16 C (1) /16 C (1-1/4) /8 C (1-1/2) /8 Tube Nut JIC P/Number... Thread F /16 F /16 F /16 F F /16 F /16 F /16 Cap Nut Metric Komatsu 1.5mm Pitch P/Number... Thread CK /16 CK /16 CK /16 CK CK /16 CK /16 CK CK /16 CK /16 CK /16 CK /16 P/Number...Thread CP /8 CP /4 CP /8 CP /2 CP /4 CP CP /4 CP /2 CP Bulkhead Nut ORFS P/Number...Thread F /16 F /16 F F /16 F /16 F /16 P/Number...(Tube)... Thread C83-07N...(1/4)...7/16 C83-08N...(5/16)...1/2 C83-09N...(3/8)...9/16 C83-12N...(1/2)...3/4 C83-14N...(5/8)...7/8 C83-17N...(3/4) /16 C83-19N...(7/8) /16 C83-21N...(1) /16 C83-26N...(1-1/4) /8 C83-30N...(1-1/2) /8 C83-40N...(2) /2 Tube Sleeve JIC P/Number...(Tube)... Thread C83-07S...(1/4)...7/16 C83-08S...(5/16)...1/2 C83-09S...(3/8)...9/16 C83-12S...(1/2)...3/4 C83-14S...(5/8)...7/8 C83-17S...(3/4) /16 C83-19S...(7/8) /16 C83-21S...(1) /16 C83-26S...(1-1/4) /8 C83-30S...(1-1/2) /8 C83-40S...(2) /2 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.35

128 Section 4 Adaptors *Manufactured To Order (minimum qtys may apply) Tube Nut &Sleeve Assembly ORFS (Nut =F83-**N, Sleeve =F83-**S) Tube Reducer Assembly F/M JIC x JIC Style A (Nut =C83-**N, Reducer =C84-****R) Tube Reducer Fixed F/M JIC x JIC Style B P/Number...(Tube)... Thread F (1/4)...9/16 F (3/8)...11/16 F (1/2)...13/16 F (5/8)...1 F (3/4) /16 F (1) /16 F (1/1/4) /16 Tube Nut ORFS P/Number...(Tube)... Thread F83-09N...(1/4)...9/16 F83-11N...(3/8)...11/16 F83-13N...(1/2)...13/16 F83-16N...(5/8)...1 F83-19N...(3/4) /16 F83-23N...(1) /16 F83-27N...(1/1/4) /16 Tube Sleeve ORFS P/Number... Thread C /16 x 7/16 C /4 x 9/16 C /8 x 9/16 C /16 x 7/16 C /16 x 9/16 C /16 x 3/4 C /16 x 3/4 C /16 x 7/8 C /16 x 1-1/16 C /8 x 3/4 C /8 x 1-1/16 C /8 x 1-5/16 C /8 x 1-5/16 C /8 x 1-5/8 C /2 x 1-7/8 Tube Reducer JIC x JIC Style A (Nut =C83-**N) P/Number...Thread C B...3/4 x 7/16 C B...7/8 x 3/4 C B...1-1/16 x 7/8 C B /8 x 1-5/8 C B /2 x 1-7/8 Tube Reducer Assembly F/M ORFS x ORFS (Nut = F83-**N, Reducer = F84-****R) P/Number...Thread F /16 x 9/16 F /16 x 9/16 F /16 x 11/16 F x 13/16 F /16 x 13/16 Tube Reducer F/M ORFS x ORFS (Nut F83-**N P/Number...(Tube)... Thread F83-09S...(1/4)...9/16 F83-11S...(3/8)...11/16 F83-13S...(1/2)...13/16 F83-16S...(5/8)...1 F83-19S...(3/4) /16 F83-23S...(1) /16 P/Number... Thread C R... 9/16 x 7/16 C R... 3/4 x 7/16 C R... 3/4 x 9/16 C R... 7/8 x 9/16 C R...1-1/16 x 7/16 C R...1-1/16 x 9/16 C R...1-1/16 x 3/4 C R...1-5/16 x 3/4 C R...1-5/16 x 7/8 C R...1-5/16 x 1-1/16 C R...1-5/8 x 3/4 C R...1-5/8 x 1-1/16 C R...1-5/8 x 1-5/16 * C R...1-7/8 x 1-1/16 C R...1-7/8 x 1-5/16 P/Number...Thread * F R...11/16 x 9/16 F R...13/16 x 9/16 * F R...13/16 x 11/16 F R...1 x 13/16 F R...1-3/16 x 13/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

129 *Manufactured To Order (minimum qtys may apply) Tubeweld Nipple JIC Male Section 4 Adaptors Tubeweld Nipple BSPT Male Tubeweld Nipple BSPP Male P/Number... Thread... Tube C / /4 C / /8 C / /2 C /4... 3/8 C /4... 1/2 C /4... 5/8 C /4... 3/4 C /8... 5/8 C /8... 3/4 C / /4 C / /8 C / C / /4 * C / /8 C / C / /4 C / /2 C / /4 C / /2 C / /2 C / Tubeweld Nipple ORFS P/Number... Thread... Tube * F / /4 F / /8 * F / /8 * F / /2 * F /8 * F / /4 * F / * F / /4 P/Number...Thread...Tube CB /4...1/4 CB /4...3/8 * CB /8...1/4 CB /8...3/8 CB /8...1/2 CB /8...5/8 CB /2...3/8 CB /2...1/2 CB /2...5/8 CB /2...3/4 CB / CB /4...3/4 CB / * CB / /4 CB /4 CB CB /4 CB /2 CB / CB / /4 CB / /2 CB / /4 CB / /2 CB Tubeweld Nipple NPTF Male P/Number...Thread...Tube * CN /4...3/8 CN /8...3/8 * CN /8...1/2 CN /4...3/4 P/Number...Thread...Tube CP /4...3/8 CP /8...1/2 CP /2...5/8 CP /4...1 CP /4 CP / /2 Tubeweld Union JIC Female P/Number...Thread...Tube C /16...1/4 C /16...1/4 C /16...3/8 C /4...3/8 C /4...1/2 C /4...5/8 C /8...1/2 C /8...5/8 C /8...3/4 C /16...3/4 C / C87H C / C / /4 C / /4 C / /2 C / /2 C /2...2 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.37

130 Tubeweld Union BSPP Female Section 4 Adaptors Tubeweld Flange SAE O Ring Code 61 (3000 psi) *Manufactured To Order (minimum qtys may apply) Short 90 deg. Tube JIC x JIC M/F SAE 100R2 Working P/Number...Thread...Tube CB /4...1/4 CB /4...3/8 CB /8...3/8 CB /2...1/2 CB /2...5/8 CB /2...3/4 CB /4...3/4 CB CB /4 CB /4...1 CB / /4 CB / /2 Tubeweld 90 deg Elbow JIC Male P/Number...Thread...Tube * C /16...1/4 C /16...3/8 C /16...1/2 * C /4...3/8 - C /4...1/2 C /4...5/8 * C /4...3/4 C /8...5/8 * C /16...3/4 C /16...7/8 C / * C / /4 * C / /4 P/Number... Flange... Tube C /2... 1/2 C /2... 5/8 C /4... 1/2 * C /4... 5/8 C /4... 3/4 C / C /2 * C /8 C /4 C C /4 C /4... 3/4 C / C / /4 C / /2 C / C / /4 C / /2 * C / C /4 C /2 C * C / C / /2 90 Duro O Ring supplied Tubeweld Flange SAE O Ring Code 62 (6000 psi) P/Number... Flange... Tube C92H /2... 1/2 C92H /2... 3/4 C92H /4... 3/4 * C92H / * C92H /4 C92H C92H /4 C92H / C92H / /4 C92H / /2 C92H / /4 C92H / /2 C92H /2 C92H Duro O Ring supplied P/Number...Thread C /16 x 7/16 C /2 x 1/2 C /16 x 9/16 C /4 x 3/4 C /8 x 7/8 C /16 x 1-1/16 C /16 x 1-5/16 C /8 x 1-5/8 C /8 x 1-7/8 C /2 x 2-1/2 Short 90 deg. Tube M/F JIC x JIC SAE 100R12 Working P/Number...Thread C93H /4 x 3/4 C93H /16 x 1-1/16 C93H /16 x 1-5/16 C93H /8 x 1-5/8 C93H /8 x 1-7/8 Long 90 deg. Tube M/F JIC x JIC SAE 100R2 Working P/Number...Thread C /16 x 7/16 C /2 x 1/2 C /16 x 9/16 C /4 x 3/4 C /8 x 7/8 C /16 x 1-1/16 C /16 x 1-5/16 C /8 x 1-5/8 C /8 x 1-7/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

131 *Manufactured To Order (minimum qtys may apply) Long 90 deg. Tube M/F JIC x JIC SAE 100R12 Working Section 4 Adaptors Straight Flangehead JIC Male x SAE (Code 61) SAE 100R2 Working 90 deg. Flangehead JIC Male x SAE (Code 61) SAE 100R2 Working P/Number... Thread C94H /4 x 3/4 C94H /16 x 1-1/16 C94H /16 x 1-5/16 C94H /8 x 1-5/8 C94H /8 x 1-7/8 Short 45 deg. Tube M/F JIC x JIC SAE 100R2 Working P/Number... Thread C /16 x 7/16 * C /2 x 1/2 C /16 x 9/16 C /4 x 3/4 C /8 x 7/8 C /16 x 1-1/16 C /16 x 1-5/16 C /8 x 1-5/8 P/Number...Thread... Flange C /4...1/2 C /4...3/4 C /8...3/4 C /16...3/4 C / C / /4 C / C / /4 C / /2 C / /4 C / /2 C / C / /2 C / C / Duro O Ring supplied Straight Flangehead JIC Male x SAE (Code 62) SAE 100R12 Working P/Number... Thread.Flange C /4...1/2 C /4...3/4 C /8...3/4 C / C /16...3/4 C / C / /4 * C / /2 C / C / /4 C / /2 C /8...1 C / /4 C / /2 C /8...2 * C / /4 C / /2 C /2...2 C SUCTION / /2 90 Duro O Ring supplied 90 deg. Flangehead JIC Male x SAE (Code 62) SAE 100R12 Working P/Number...Thread... Flange C96H /16...3/4 C96H / C96H / C96H / /4 C96H / /4 C96H / /2 C96H / /4 C96H / /2 90 Duro O Ring supplied P/Number...Thread...Flange C97H /16...3/4 C97H / * C97H / /4 C97H /16...3/4 C97H / C97H / /4 C97H / /4 C97H / /2 * C97H / /4 C97H / /2 C97H / /2 90 Duro O Ring supplied For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.39

132 45 deg. Flangehead JIC Male x SAE (Code 61) SAE 100R2 Working Section 4 Adaptors Straight Flangehead JIC Male x SAE (Code 62) 6000 psi Working *Manufactured To Order (minimum qtys may apply) 90-deg Flangehead JIC Male x SAE (Code 62) 6000 psi Working P/Number...Thread...Flange C /4...1/2 C /4...3/4 C /16...3/4 C / C / C / /4 C / /2 C / /4 C / /2 * C / /2 90 Duro O Ring supplied 45 deg. Flangehead JIC Male x SAE (Code 62) SAE 100R12 Working P/Number... Thread...Flange 12FLH6K-12MJ / /4 16FLH6K-12MJ / FLH6K-16MJ FLH6K-20MJ FLH6K-16MJ / /4 20FLH6K-20MJ / /4 24FLH6K-20MJ / /2 24FLH6K-24MJ / /2 90 Duro O Ring NOT included 45-deg Flangehead JIC Male x SAE (Code 62) 6000 psi Working P/Number... Thread... Flange 12FLH6K-12MJ / /4 12FLH6K-16MJ / /4 16FLH6K-12MJ / FLH6K-16MJ / FLH6K-20MJ / FLH6K-16MJ / /4 20FLH6K-20MJ / /4 24FLH6K-20MJ / /2 90 Duro O Ring NOT included P/Number...Thread...Flange C98H /8...1/2 C98H /16...3/4 C98H / C98H / /4 C98H / /2 90 Duro O Ring supplied P/Number... Thread...Flange 12FLH6K-12MJ / /4 16FLH6K-16MJ / FLH6K-20MJ / /4 90 Duro O Ring NOT included 4.40 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

133 *Manufactured To Order (minimum qtys may apply) Section 4 Adaptors SAE Split Flange Clamp Code 61 UNC & Metric Set Screws Refer Page 4.44 Four Bolt Flange Blank Code 61 (3000 psi) UNC & Metric Set Screws Refer Page 4.44 Four Bolt Flange BSPP Code 61 (3000 psi) UNC & Metric Set Screws Refer Page 4.44 P/Number... Flange FSC /2 FSC /4 FSC FSC /4 FSC /2 FSC FSC /2 FSC SAE Split Flange Clamp Code 62 UNC & Metric Set Screws Refer Page 4.44 P/Number...Flange FL /2 FL /4 FL FL /4 FL /2 FL FL /2 FL Duro O Ring supplied Four Bolt Flange Blank Code 62 (6000 psi) UNC & Metric Set Screws Refer Page 4.44 P/Number... Thread/Flange FB /2 FB /4 FB FB /4 FB /2 FB FB /2 FB Duro O Ring supplied Four Bolt Flange NPT Code 61 (3000 psi) UNC & Metric Set Screws Refer Page 4.44) P/Number... Flange FSCH /2 FSCH /4 FSCH FSCH /4 FSCH /2 FSCH SAE Split Flange CAT-style Clamp c/w UNC Bolt Kit P/Number... Flange 12CATFHS... 3/4 16CATFHS CATFHS...1-1/4 24CATFHS...1-1/2 32CATFHS... 2 P/Number...Flange FLH /2 FLH /4 FLH FLH /4 FLH /2 FLH Duro O Ring supplied Flange Blank FP = Code 61 FPH = Code 62 P/Number...Flange FP /2 FP /4 FP FP /4 FP /2 FP FPH /2 FPH /4 FPH FPH /4 FPH /1/2 FPH Duro O Ring supplied P/Number... Thread/Flange FN /2 FN /4 FN FN /4 FN /2 FN Duro O Ring supplied Four Bolt Flange BSPP Code 62 (6000 psi) UNC & Metric Set Screws Refer Page 4.44 P/Number... Thread/Flange FBH /4 FBH FBH /4 FBH /2 FBH Duro O Ring supplied For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.41

134 O Ring to suit SAE O Ring Boss Thread Section 4 Adaptors Dowty Seal BSPP Thread DIN Std *Manufactured To Order (minimum qtys may apply) Dowty Seal Metric Thread P/Number... Size R /8 R /16 R /2 R /16 R /4 R /8 R /16 R /16 R /16 R /8 R /8 R /2 O Ring to Suit SAE Flange P/Number... Size R /8 R /4 R /8 R /2 R /4 R R /4 Dowty Seal BSPP Thread B.S. Std P/Number...Size R04M M8 R04M M10 R04M M12 R04M M14 R04M M16 R04M M18 R04M M20 R04M M22 R04M M24 R04M M26 R04M M27 R04M M33 R04M M42 R04M M48 O Ring to Suit Male Swivel P/Number... Size R /2 R /4 R R /4 R /2 R R /2 R O Ring to Suit BSPP Threads P/Number... Size R04B /8 R04B /4 R04B /8 R04B /2 R04B /4 R04B R04B /4 R04B /2 R04B R04B /2 P/Number...Size R /4 R /8 R /2 O Ring to Suit ORFS Fittings P/Number... Size R /8 R /4 R /8 R /2 R /4 R R /4 R /2 P/Number...Size R /16 R /16 R /16 R R /16 R /16 R /16 R For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

135 *Manufactured To Order (minimum qtys may apply) Retaining Ring For BSPP O Ring Section 4 Adaptors Metric & BSPP Seal Rings Southcott O-ring Kit UNO, ORFS, C61 & C62 P/Number... Size R /8 R /4 R /8 R /2 R /4 R R /4 R /2 O Ring Encapsulated to Suit BSPP Threads P/Number... Size DKR-1/4...1/4 DKR-3/8...3/8 DKR-1/2...1/2 DKR-3/4...3/4 DKR DKR-1-1/ /4 DKR-1-1/ /2 DKR-M12... M12 DKR-M14... M14 DKR-M16... M16 DKR-M18... M18 DKR-M22... M22 P/Number... SORKIT... Southcott O-ring Kit BSPP O-ring & retainer P/Number... SORKIT-P... BSPP O-ring & Ret. P/Number... Size R /8 R /4 R /8 R /2 R /4 R R /4 R /2 Southcott Bonded Seal Kit Metric Seal P/Number... SORKIT-DM... Southcott Bonded Seal Kit BSPP Seal P/Number... SORKIT-DP... For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.43

136 Section 4 Adaptors *Manufactured To Order (minimum qtys may apply) BOLT KIT UNC includes four cap screws four spring washers one 90 Duro O Ring Suits split or solid type BOLT KIT METRIC includes four cap screws four spring washers one 90 Duro O Ring Suits split or solid type FLANGE BOLT CENTRES P/Number... Thread BKU-5/16CAP... 5/16 x 18tpi BKU-3/8CAP... 3/8 x 16tpi BKU-7/16CAP... 7/16 x 14tpi BKU-1/2CAP... 1/2 x 13tpi BKU-5/8CAP... 5/8 x 11tpi BKU-3/4CAP... 3/4 x 10tpi BKUH-3/8CAP... 3/8 x 16tpi BKUH-7/16CAP... 7/16 x 14tpi BKUH-1/2CAP... 1/2 x 13tpi BOLT KIT UNC includes four hex head bolts four spring washers one 90 Duro O Ring Suits split type only P/Number... Thread BKM-08CAP...M8 x 1.25 BKM-10CAP...M10 x 1.5 BKM-12CAP...M12 x 1.75 BKM-14CAP...M14 x 2 BKM-16CAP...M16 x 2 BKM-20CAP...M20 x 2.5 BKMH-10CAP...M10 x 1.5 BKMH-12CAP...M12 x 1.75 BKMH-16CAP...M16 x 2 BOLT KIT METRIC includes four hex head bolts four spring washers one 90 Duro O Ring Suits split type only Dash Size Inch- Size Code 61 A B M.W. P. psi -08 1/2" /4" " /4" /2" " /2" " P/Number... Thread BKU-5/16HEX... 5/16 x 18tpi BKU-3/8HEX... 3/8 x 16tpi BKU-7/16HEX... 7/16 x 14tpi BKU-1/2HEX... 1/2 x 13tpi BKU-5/8HEX... 5/8 x 11tpi BKU-3/4HEX... 3/4 x 10tpi BKUH-3/8HEX... 3/8 x 16tpi BKUH-7/16HEX... 7/16 x 14tpi BKUH-1/2HEX... 1/2 x 13tpi P/Number... Thread BKM-08HEX...M8 x 1.25 BKM-10HEX...M10 x 1.5 BKM-12HEX...M12 x 1.75 BKM-14HEX...M14 x 2 BKM-16HEX...M16 x 2 BKM-20HEX...M20 x 2.5 BKMH-10HEX...M10 x 1.5 BKMH-12HEX...M12 x 1.75 Dash Size Inch- Size Code 62 A B M.W. P. psi -08 1/2" /4" " /4" /2" " For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

137 *Manufactured To Order (minimum qtys may apply) PLUG PLASTIC JIC/SAE/ORFS Section 4 Adaptors CAP PLASTIC JIC/SAE/ORFS CAP PLASTIC FLANGE CODE 61 P/Number Thread PPJ /16 PPJ /2 PPJ /16 PPJ /8 PPJ /16 PPJ /4 PPJ /16 PPJ /8 PPJ PPJ /16 PPJ /16 PPJ /16 PPJ /16 PPJ /8 PPJ /8 PPJ /2 PLUG PLASTIC BSP/NPT P/Number Thread PPB /8 PPB /4 PPB /8 PPB /2 PPB /8 PPB /4 PPB PPB /4 PPB /2 PPB PLUG PLASTIC METRIC P/Number......Thread CPJ /16 CPJ /2 CPJ /16 CPJ /8 CPJ /16 CPJ /4 CPJ /16 CPJ /8 CPJ CPJ /16 CPJ /16 CPJ /16 CPJ /16 CPJ /8 CPJ /8 CAP PLASTIC BSP/NPT P/Number......Thread CPB /8 CPB /4 CPB /8 CPB /2 CPB /8 CPB /4 CPB CPB /4 CPB /2 CPB CAP PLASTIC METRIC P/Number Thread CPF /2 CPF /4 CPF CPF /4 CPF /2 CPF CAP PLASTIC FLANGE CODE 62 P/Number Thread CPF /2 CPF /4 CPF CPF /4 CPF /2 CPF P/Number Thread PPM M12 x 1.5 PPM M14 x 1.5 PPM M16 x 1.5 PPM M20 x 1.5 PPM M22 x 1.5 PPM M24 x 1.5 PPM M26 x 1.5 PPM M30 x 2 PPM M33 x 2 PPM M36 x 2 PPM M42 x 2 PPM M52 x 2 P/Number......Thread CPM M8 x 1.0 CPM M10 x 1.0 CPM M12 x 1.5 CPM M14 x 1.5 CPM M16 x 1.5 CPM M20 x 1.5 CPM M22 x 1.5 CPM M24 x 1.5 CPM M26 x 1.5 CPM M30 x 2 CPM M33 x 2 CPM M36 x 2 CPM M42 x 2 CPM M52 x 2 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.45

138 Section 4 Adaptors *Manufactured To Order (minimum qtys may apply) NFPA and ISO Approve use of Seals in Flared Fittings The most recent revision of the National Fluid Power Association s (NFPA) standard relating to "Hydraulic Fluid Power systems - Methods For Preventing External Leakage" now recommends the use of compliant seals to address the universal weeping problem of JIC flared fittings. NFPA now joins the International Standards Organization (ISO) as the two leading standards organizations in the world both recommending seals be fitted to JIC type flared joints to address both environmental and OH&S issues. Flaretite Seals have a proven history of positive leak-free performance on the most difficult and challenging global applications, such as the M1 Abrams Tanks and the latest M-777 Howitzer, where severe shock loads and vibration saw JIC flared fitting joints fail on commissioning. In addition to these and other US Army and Navy applications Flaretite seals are fitted by manufacturers such as Wind Generator Drives and Kanga Loaders in Australia on their ride-on mini loaders to eliminate costly rework and customer compliant warranty issues. Flaretite Seals are a metal stamping with multiple concentric rings. They are impregnated with a special Loctite coating and when inserted into a flared fitting joint the concentric rings form multiple seals down the face of the flare whilst the loctite coating fills minor fitting face imperfections providing a positive leak free seal solution. Flaretite Seals are available in 304 stainless for 37 degree JIC standard Hydraulic system use and 316 stainless for marine applications. They are also available in 30 degree JIS, 45 degree (SAE J512 Automotive) and 45 degree (SAE J513) in copper for gas and refrigeration use For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

139 *Manufactured To Order (minimum qtys may apply) Section 4 Adaptors FLARETITE SEALS Seals the mating faces of any standard JIC/SAE/JIS flare joint Individual Seal JIC Thread Size Pack Qty. IP-37FT SOR 7/16" 1 IP-37FT SOR 9/16" 1 IP-37FT SOR 3/4" 1 IP-37FT SOR 7/8" 1 IP-37FT SOR 1-1/16" 1 IP-37FT SOR 1-5/16" 1 IP-37FT SOR 1-5/8" 1 IP-37FT SGR 1-7/8" 1 IP-37FT SGR 2-1/2" 1 Standard Pack JIC Thread Size Pack Qty. BP-37FT SOR 7/16" 20 BP-37FT SOR 9/16" 20 BP-37FT SOR 3/4" 20 BP-37FT SOR 7/8" 20 BP-37FT SOR 1-1/16" 20 BP-37FT SOR 1-5/16" 20 BP-37FT SOR 1-5/8" 20 BP-37FT SGR 1-7/8" 10 BP-37FT SGR 2-1/2" 10 Bulk Pack JIC Thread Size Pack Qty. QT-37FT SOR 7/16" 100 QT-37FT SOR 9/16" 100 QT-37FT SOR 3/4" 100 QT-37FT SOR 7/8" 100 QT-37FT SOR 1-1/16" 100 QT-37FT SOR 1-5/16" 50 QT-37FT SOR 1-5/8" 50 QT-37FT SGR 1-7/8" 25 QT-37FT SGR 2-1/2" 10 FLARETITE GRAB PACK 7/16", 9/16", 3/4", 7/8", 1 1/16", 1 5/16", 1 5/8" 5, 5, 5, 5, 5, 5, 5 Flaretite seals are available in 316 marine grade stainless steel in all sizes on request For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.47

140 Section 4 Adaptors *Manufactured To Order (minimum qtys may apply) Banjo Metric c/w Back Bore Banjo Bolt Metric P/Number... Diam...B/Bore BJ BJ BJ BJ Banjo BSPP c/w Back Bore P/Number... Diam...Pitch BJB-08Mx BJB-08Mx BJB-10Mx BJB-12Mx BJB-14Mx Banjo Bolt BSPP P/Number... Diam...B/Bore BJ /8... 1/8 BJ /4... 1/4 BJ /8... 3/8 BJ /2... 1/2 Banjo Metric to JIC-M P/Number... Diam...JIC BJ /16 BJ /16 BJ /16 BJ /16 BJ /16 BJ /16 P/Number Size BJB-02B /8 BJB-04B /4 BJB-06B /8 BJB-08B /2 Banjo Washer P/Number... Type... Size BJW-08M... Metric... 8 BJW-10M... Metric BJW-12M... Metric BJW-14M... Metric BJW-02B... BSPP...1/8 BJW-04B... BSPP...1/4 BJW-06B... BSPP...3/8 BJW-08B... BSPP...1/ For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.

141 Section 5 Accessories QUICK RELEASE COUPLINGS - FASTER NV... Valve Type Coupling NS... Ball Type Couplings PV... Push-Pull VV... Screw On Heavy Duty PVVM... Screw On FFH & 2FFI... Flat-Faced Couplings FFI... Flat-Faced Couplings FFI... Mobile Connector With Drain FFV... Flat-Faced Screw Together CFPV... Valve Type Rigid Mount Coupling ANV... A Series Standard Coupling NZ... Interchange with PB3310 Coupling DF... Coupling Test Point QUICK RELEASE COUPLINGS - SUNDRIES - FASTER TM & TF... PVC Dust Plug & Caps to suit NV couplings TMV & TFV... Aluminium Dust Plugs & Caps to suit VV couplings TMP & TFP... Aluminium Dust Plugs & Caps to suit P couplings TM2FN & TF2FN... Dust Covers to suit FFN series TM2FJ & TF2FJ... Dust Covers to suit FFI series SD... Dual Bracket SS-12M... Support Nipple TA... Self-Closing Dust Cap QUICK RELEASE COUPLINGS - MULTIFASTER... Standard MultiFaster Front End Loader MultiFaster New Holland MultiFaster QUICK RELEASE COUPLINGS - TEMA... Coupling Dust Plug Dust Cap SWIVEL JOINTS - TEMA... Swivel Joint PORTA-POWER HOSES... Replacement Hose Assemblies Quick-Release Couplings PIPE CLAMPS - SINGLES STD & MED DUTY C2 - C7... Standard & Medium Duty Clamps PD1 - PD7... Double Plate PM1 - PM7... Multiple Plate BB, DF6... Track & Nut VA1 - VA7... Stacking Bolt M & F PIPE CLAMPS - SINGLES HEAVY DUTY CP1 - CP4... Heavyweight Clamp VA-CP... Stacking Bolt M & F PIPE CLAMPS - DOUBLES CF1 - CF5... Double Clamp VA-CF... Stacking Bolt M & F CROSS REFERENCE... Pipe Clamp Selection Chart *Available on Request - Minimum Order Quantities May Apply 5.1

142 Section 5 Accessories SWIVEL JOINTS S SERIES... In Line Swivel Joints S SERIES Swivel Joints S-SERIES... Swivel Joint Seal Kits ROTARY COUPLINGS - MTC GGIL SERIES... In Line Rotary Couplings GG90 SERIES Rotary Couplings PRESSURE GAUGES... Gauge - Quadrigauge Gauge - Glycerine-Filled Dual Scale Gauge - Digital Gauge Isolator Gauge Adaptors TEST POINTS... Test Point Couplings Test Point to Gauge Adaptor Test Point Hose Assemblies Test Point Tees TUBE... Hydraulic Tube COMPRESSION FITTTINGS... Versa Flare Compression Fittings HOSE CLAMPS... Low and Suction Hose Worm Drive Clamps Powergrip Shrinkband Clamps SWAGING MACHINES... Child CUT-OFF SAWS... DC & AC *Available on Request - Minimum Order Quantities May Apply

143 Section 5 Accessories NV SERIES Valve Type: Interchangeable to ISO A Standards in 1/2 THRD MWP BSPP BAR MALE HALF FEMALE HALF Dust Plugs and Caps see page 5.7 NS SERIES COMPLETE 1/4 350 NV-14GAS-M NV-14GAS-F NV-14GAS 3/8 300 NV-38GAS-M NV-38GAS-F NV-38GAS 1/2 300 NV-12GAS-M NV-12GAS-F NV-12GAS 3/4 250 NV-34GAS-M NV-34GAS-F NV-34GAS NV-1GAS-M NV-1GAS-F NV-1GAS 1 1/4 220 NV-114GAS-M NV-114GAS-F NV-114GAS 1 1/2 180 NV-112GAS-M NV-112GAS-F NV-112GAS NV-2GAS-M NV-2GAS-F NV-2GAS Ball Type: Interchangeable to ISO A Standards in 1/2 THRD MWP NPT BAR MALE HALF FEMALE HALF Dust Plugs and Caps see page 5.7 PV SERIES COMPLETE 1/4 250 NS-14NPT-M NS-14NPT-F NS-14NPT 3/8 250 NS-38NPT-M NS-38NPT-F NS-38NPT 1/2 200 NS-12NPT-M NS-12NPT-F NS-12NPT 3/4 170 NS-34NPT-M NS-34NPT-F NS-34NPT NS-1NPT-M NS-1NPT-F NS-1NPT THRD BSPP MWP BAR MALE HALF FEMALE HALF COMPLETE *1/2 200 NS-12GAS-M NS-12GAS-F NS-12GAS Valve Type: Push/Pull Couplings. Interchangeable to ISO A Standards. THRD WP BSPP BAR MALE HALF FEMALE COMPLETE HALF 1/2 260 NV-12GAS-M PV-12GAS-F PV-12GAS *Available on Request - Minimum Order Quantities May Apply 5.3

144 Section 5 Accessories VV SERIES Valve Type: Screw on couplings. Heavy Duty Series THRD BSPP MWP BAR MALE HALF FEMALE HALF Dust Plugs and Caps see page 5.7 COMPLETE 3/8 300 VV-38GAS-M VV-38GAS-F VV-38GAS 1/2 300 VV-12GAS-M VV-12GAS-F VV-12GAS 3/4 250 VV-34GAS-M VV-34GAS-F VV-34GAS VV-1GAS-M VV-1GAS-F VV-1GAS PVVM SERIES Porta-Power Couplers Valve Type: Screw on couplings. Heavy Duty Series. Thread MWP NPT BAR MALE HALF FEMALE HALF Dust Plugs and Caps see page 5.7 COMPLETE 1/4" 1050 PVVM-14NPT-M PVVM-1/14NPT-F PVVM-14NPT 3/8" 1000 PVVM-38NPT-M PVVM-1/38NPT-F PVVM-38NPT 5.4 *Available on Request - Minimum Order Quantities May Apply

145 FFH & 2FFI SERIES Flat Face: Connectability: without pressure THREAD MWP BAR Dust Plugs and Caps see page 5.8 3FFI SERIES MALE HALF Section 5 Accessories Flat Face:Connectability: male under pressure, female free to drain Dust Plugs and Caps see page 5.8 FEMALE HALF 1/4"BSPP 350 FFH04-14GAS-M FFH04-14GAS-F 3/8"BSPP 350 FFH06-38GAS-M FFH06-38GAS-F 1/2"BSPP 350 FFH06-12GAS-M FFH06-12GAS-F 1/2"BSPP 350 FFH08-12GAS-M FFH08-12GAS-F 3/4"BSPP 350 FFH08-34GAS-M FFH08-34GAS-F 3/4"BSPP 350 FFH10-34GAS-M FFH10-34GAS-F 3/4"BSPP 350 FFH12-34GAS-M FFH12-34GAS-F 1"BSPP 350 FFH12-1GAS-M FFH12-1GAS-F 1"BSPP 250 FFI-1GAS-M 2FFI-1GAS-F 3/4"UN-O 350 FFH06-12SAE-M FFH06-12SAE-F 7/8"UN-O 350 FFH08-58SAE-M FFH08-58SAE-F 1-1/16"UN-O 350 FFH08-34SAE-M FFH08-34SAE-F 1-1/16"UN-O 350 FFH12-34SAE-M FFH12-34SAE-F 1-5/16"UN-O 350 FFH12-1SAE-M FFH12-1SAE-F THREAD MWP BAR MALE HALF FEMALE HALF 3/8"BSPP 250 3FFI-38GAS-M FFH06-38GAS-F 1/2"BSPP 250 3FFI-12GAS-M FFH08-12GAS-F 3/4"BSPP 250 3FFI-34GAS-M FFH12-34GAS-F 1"BSPP 250 3FFI-1GAS-M 2FFI-1GAS-F 4FFI SERIES Flat Face:Connectability: both male and female couplings under pressure THREAD MWP BAR MALE HALF FEMALE HALF 7/8"JIC-M 275 4BD4FI12-13/58S 1-1/16"JIC-M 275 4BD4FI12-13/34S Spare Part Kits for the above Male & Female Spares 4FI-12-M 4FI-12-F Centre Drain Line KIT4BD-FFN38M *Available on Request - Minimum Order Quantities May Apply 5.5

146 3FFV SERIES Section 5 Accessories Flat Face: Screw-on type. Connectability: male & female under pressure This coupling is resistant to pressure peaks (hammer circuits) THRD BSPP MWP BAR 3CFPV SERIES G Case N New Holland H John Deere Q Sisu (Valmet) M Massey Ferguson Agricultural Series Push/Pull Couplings, rigid mount. ISO7241-A ANV SERIES MALE HALF FEMALE HALF 1/ FFV-12GAS-M 3FFV-12GAS-F 3/ FFV-34GAS-M 3FFV-34GAS-F FFV-1GAS-M 3FFV-1GAS-F 1¼ 400 3FFV-114GAS-M 3FFV-114GAS-F 1½ 400 3FFV-112GAS-M 3FFV-112GAS-F THRD MWP BAR MALE HALF OEM FEMALE HALF 7/8 UNF 250 NV or 2NV G 3CFPV-1/78UNF-F M22X NV or 2NV G H M N 3CFPV-1/2215-F 7/8 UNF 250 NV or 2NV Q 3CFPV-14/78UNF-F Coupling: A Series Standard Interchangeable to ISO : THREAD NZ SERIES MWP BAR MALE HALF FEMALE HALF 1/4" NPT-F 350 ANV-14NPT-M ANV-14NPT-F 3/8" BSPP-F 300 ANV-38GAS-M ANV-38GAS-F 3/4" BSPP-F 250 ANV-34GAS-M ANV-34GAS-F 1" BSPP-F 230 ANV-1GAS-M ANV-1GAS-F Coupling: Interchange with PB3310 (PBR 1"truck) THREAD MWP BAR MALE HALF FEMALE HALF 1" BSPT-F 230 PBR-16MT PBR-16FB Dust Cap & Plug PBR-16DC PBR-16DP 5.6 *Available on Request - Minimum Order Quantities May Apply

147 Section 5 Accessories DF SERIES Coupling Test Point: THREAD MWP BAR MALE HALF TM & TF PVC DUST PLUGS & CAPS To suit NV, NS Series To suit NV and NS series Standard colour BLUE, also available in ORANGE, YELLOW, BLACK, RED, GREEN TMV & TFV ALUMINIUM DUST PLUGS & CAPS To suit VV Series TMP & TFP DUST PLUGS & CAPS To suit P Series FEMALE HALF 1/8 NPTF (Female) 480 DF04-18NPT-M DF04-18NPT-F 1/4 NPTF (Female) 480 DF04-14NPT-M DF04-14NPT-F 1/4 NPTF (Male) 480 DF04-1/14NPT-M DF04-1/14NPT-F 7/16 UN O (Male) 480 DF04-1/14SAE-M DF04-1/14SAE-F 1/2 UN O (Male) 480 DF04-1/516SAE-M DF04-1/516SAE-F 9/16 UN O (Male) 480 DF04-1/38SAE-M DF04-1/38SAE-F Size Plug Cap 1/4 TM-14 TF-14 3/8 TM-38 TF-38 1/2 TM-12 TF-12 3/4 TM-34 TF-34 1 TM-1 TF-1 Size Plug Cap 1/4 TMV-14S TFV-14S 3/8 TMV-38S TFV-38S 1/2 TMV-12S TFV-12S 3/4 TMV-34S TFV-34S 1 TMV-1S TFV-1S Size Plug Cap 1/4 TMP-14 TFP-14 3/8 TMP-38 TFP-38 *Available on Request - Minimum Order Quantities May Apply 5.7

148 Section 5 Accessories TM2FN & TF2FN ALUMINIUM DUST COVERS To suit FFN Series Size Suit Female Suit Male 3/8 TM2FN38S TF2FN38S 1/2 TM2FN12S TF2FN12S 3/4 TM2FN34S TF2FN34S 1 TM2FN1S TF2FN1S TM2FJ & TF2FJ ALUMINIUM DUST COVERS To suit FFI Series Size Plug Cap 1/4 TM2FJ14S TF2FJ14S 1/2 TM2FJ12S TF2FJ12S 3/4 TM2FJ34S TF2FJ34S SD DUAL BRACKET 1/2 COUPLING SD-12 SS SUPPORT NIPPLE SS-12M TA SELF CLOSING DUST CAP FOR PUSH/PULL COUPLINGS TA *Available on Request - Minimum Order Quantities May Apply

149 Section 5 Accessories MULTIFASTER Quick-Release Multiconnection System Standard MultiFaster Base Size Thread BSPP Qty Of Lines Elec. Conn. Fixed Half Front End Loader MultiFaster New Holland MultiFaster Special Mobile Half 06 1/2 2 N 2P G-FC 2P G-MC 08 1/2 2 N 2P G-FC 2P G-MC 06 1/2 4 N 2P G-FC 2P G-MC 08 1/2 4 N 2P G-FC 2P G-MC 06 1/2 6 N 2P G-FC 2P G-MC 08 1/2 6 N 2P G-FC 2P G-MC Base Size Thread BSPP Qty Of Lines Elec. Conn. Fixed Half Mobile Half 06 3/8 4 N 2PS G-FC 2PS G-MC 06 1/2 4 N 2PS G-FC 2PS G-MC 08 1/2 4 Y 2PS G-FC 2PS G-MC Base Size Thread BSPP Qty Of Lines Elec. Conn. Fixed Half Mobile Half 06 ¼ / 5/8 5 N 2P A-FC 3P A-MC All MultiFaster connectors can include electrical connections and/or air connections. The applications and options are limited only by our imaginations. Base Size Rated Flow L/min TECHNICAL DATA Max. Bar Fluid Spillage cc Max *Available on Request - Minimum Order Quantities May Apply 5.9

150 Section 5 Accessories TEMA SERIES Quick Release Couplings Port BSPP M WP bar Male Half Female Half Complete Coupler 1/4" /8" /2" /4" " Dust Plug Size Dust Cap Size /4" /4" /8" /8" /2" /2" /4" /4" " " TEMA SWIVEL JOINTS Port G BSPP Port G1 BSPP L OD HEX 1 HEX 2 A MWP bar Weight kg /4" 3/8" /2" 3/4" /4" 1" " 1 1/4" The Tema Swivel Joint has very low torque even at max. working pressure, due to a balanced spindle seal. The Tema Swivel Joint has been shocked tested under pressure from bar 5.10 *Available on Request - Minimum Order Quantities May Apply

151 Section 5 Accessories Porta-Power REPLACEMENT HYDRAULIC HOSE ASSEMBLIES TO SUIT PORTA-POWER UNITS HOSE ASSEMBLIES 690 BAR (10000 PSI) WORKING PRESSURE 2:1 SAFETY FACTOR NB: Quick Release Coupling half not included with hose assembly. PPH-500 PPH-1000 PPH-1500 PPH-2000 PPH-2500 PPH-3000 PPH-3500 PPH-4000 PPH-4500 PPH-5000 PPH-5500 PPH-6000 PPH-6500 PPH-7000 PPH-7500 PPH PPH PPH PPH PPH indicates length in (mm). PVV Series Quick Release screw-on couplings. Heavy Duty Series. Made for high pressure applications, they are specially intended for high pressure hydraulic tools where static pressure can reach high values. Interchangeable with the most popular units existing on the market. They can be coupled/ uncoupled with the system under pressure. Maximum working pressure 1000bar (14500psi) PVVM-38NPT-M PVVM-1/38NPT-F TFP-38 TMP-38 DESCRIPTION Male half coupler 3/8 NPTF Female half coupler, 3/8 NPTF Dust Cap (Hose Half) Dust Plug (Ram Half) Also available 1/4 NPT at same prices HOSE HALF RAM HALF *Available on Request - Minimum Order Quantities May Apply 5.11

152 Section 5 Accessories POLYPROPYLENE CLAMPS Standard Duty Two Cap Screws & Washer Type C2 - C7 Medium Duty Top Plate and Hex Bolts Type C2 - C7 GROUP C2 C3 C4 C5 C6 C7 mm SIZE - OD Inches 6 1/4" 8 5/16" 10 3/8" /2" /8" /4" /8" " /4" 35 Water Pipe Jaws Only Std. Duty Complete Part o. Med. Duty Complete 1/8 GAS 1/4"GAS C2S-** C2-** C2-**-M 1/4"GAS 3/8 GAS /2" 1 GAS /4"GAS /4" /2"GAS " C3S-** C3-** C3-**-M 1/2 GAS C4S-** C4-** C4-**-M 3/4 GAS C5S-** C5-** C5-**-M C6S-** C6-** C6-**-M C7S-** C7-** C7-**-M NB: To complete the model code, replace ** with the Size, i.e. 5/8 = 5/ *Available on Request - Minimum Order Quantities May Apply

153 Section 5 Accessories CLAMP COMPONENTS SIZE -> C2 C3 C4 C5 C6 C7 DESCRIPTION Part No Part No Part No Part No Part No Top Plate PS2 PS3 PS4 PS5 PS6 PS7 Base Plate P2 P3 P4 P5 P6 P7 Ext Base Plate PL2 PL3 PL4 PL5 PL6 PL7 Cap Screw S-C1/C2 S-C3 S-C4 S-C5 S-C6 S-C7 Washer W W W W W W Hex Bolt VE1/2 VE3 VE4 VE5 VE6 VE7 Stacking Bolt VA1/2 VA3 VA4 VA5 VA6 VA7 Part No TRACK MOUNT Part No Description BB Track DF6 NUT DF8 NUT Part No DOUBLE PLATE Suit Clamp Type No. Clamp Part No MULTIPLE PLATE Suit Clamp Type No. Clamp PD1 C1 2 PM1 C1 10 PD2 C2 2 PM2 C2 10 PD3 C3 2 PM3 C3 10 PD4 C4 2 PM4 C4 10 PD5 C5 2 PM5 C5 5 PD6 C6 2 PM6 C6 5 PD7 C7 2 PM7 C7 5 PD Double Plate PM Multiple Plate C2-1/8 - GAS - M - PL ORDERING CODE Type EXT. Base Plate (Omit if not required) Size GAS = GAS PIPE (Omit if not applicable) Options:- Twin Base Plates, Multiple Base Plates Series S = Standard Duty M = Medium Duty *Available on Request - Minimum Order Quantities May Apply 5.13

154 Section 5 Accessories HEAVYWEIGHT SERIES: in polypropylene or self-extinguishing polyamide for pipes from 6 to 324 mm. for metric sizes, from 1/8 to 12" for gas inch sizes, from 1/4 to 8" for English inch sizes. It's recommended for complicated systems, for high pressure and considerable oil speed. The upper plates are also supplied in this series. High hexagon head bolts VACP are used in the stacked mounting. CP3-1 1/2 - CS ORDERING CODE Type Size GAS = GAS PIPE (Omit if not applicable) Component Pricing Group Size - OD Heavy Duty Jaws Only Heavy Duty Complete mm Inches Pipe Model 1/4 3/8 1/8"GAS CP1 1/2 1/4"GAS CP1S-**-CS CP1-**-CS 5/8 3/8"GAS 3/4 20 3/4 22 7/8 1/2"GAS CP /4"GAS CP2S-**-CS CP2-**-CS CP /4 1"GAS /2 1-1/4"GAS CP3S-**-CS CP3-**-CS "GAS CP /4"GAS /2"GAS CP4S-**-CS CP4-**-CS 63 2"GAS 65 NB: TO COMPLETE THE model Code Replace ** with the Size, i.e. 7/8 = 7/8 SIZE -> CP1 CP2 CP3 CP4 Description Part No Part No Part No Part No Top Plate TP-CP1-CS TP-CP2-CS TP-CP3-CS TP-CP4-CS Base Plate BP-CP1-CS BP-CP2-CS BP-CP3-CS BP-CP4-CS Hex Bolt S-CP1-CS S-CP2-CS S-CP3-CS S-CP4-CS Stacking Bolt VA-CP1 VA-CP2 VA-CP3 VA-CP *Available on Request - Minimum Order Quantities May Apply

155 Section 5 Accessories CF3-1/2-1/2 - GAS ORDERING CODE Type Size GAS = GAS PIPE (Omit if not applicable) GROUP SIZE - OD MM Inches Pipe TWIN CLAMP JAWS ONLY TWIN CLAMP COMPLETE CF1 CF2 CF3 CF4 CF /4-1/ /8-3/ /2-1/ /2-1/2 1/4-1/4GAS /8-5/8 3/8-3/8GAS /4-3/ /2-1/2GAS /4-3/4GAS /4-1 1/4 1-1GAS /2-1 1/2 1-1/4-1-1/4GAS CF1S-**-** CF2S-**-** CF3S-**-** CF4S-**-** CF5S-**-** CF1-**-** CF2-**-** CF3-**-** CF4-**-** CF5-**-** NB:To Complete The Model Code Replace **-** With the Size,ie 3/8-3/8 =3/8-3/8 Component Pricing SIZE -> CF1 CF2 CF3 CF4 CF5 DESCRIPTION Part No Part No Part No Part No Part No TOP PLATE TP-CF1 TP-CF2 TP-CF3 TP-CF4 TP-CF5 BASE PLATE BP-CF1 BP-CF2 BP-CF3 BP-CF4 BP-CF5 HEX BOLT S-CF1 S-CF2 S-CF3 S-CF4 S-CF5 STACKING BOLT VA-CF1 VA-CF2 VA-CF3 VA-CF4 VA-CF5 *Available on Request - Minimum Order Quantities May Apply 5.15

156 Section 5 Accessories PIPE CLAMP SELECTION CHART TO SUIT HYDRAULIC HOSE Clamp is nearest possible to hose OD HOSE ID G1 1 WIRE NON SKIVE G2 2 WIRE NON SKIVE G4K & G3K MULTI-SPIRAL GMV SUCTION HOSE 1/4 C3-1/4GAS (14mm) C3-15 (15mm) - - 3/8 C3-3/8GAS (17mm) C3-18 (18mm) C4-20 (20mm) - 1/2 C4-20 (20mm) C4-22 (22mm) C4-23 (23mm) - 5/8 C4-23 (23mm) C4-25 (25mm) C5-28 (28mm) - 3/4 C5-28 (28mm) C5-30 (30mm) C5-30 (30mm) C5-32 (32mm) 1 C6-35 (35mm) C6-38 (38mm) C6-38 (38mm) C6-38 (38mm) 1 1/4 C6-42 (42mm) C (48.3mm) C (48.3mm) C6-45 (45mm) 1 1/2 C (50.8mm) C7-54 (54mm) C7-54 (54mm) C (50.8mm) 2 CP4-65-CS (65mm) CP4-65-CS (65mm) CP4-65-CS (65mm) CP4-2-1/2-CS 5.16 *Available on Request - Minimum Order Quantities May Apply

157 Section 5 Accessories S Series/Inline 3000 psi/full flow High pressure hydraulic swivel joints MALE JIC TO MALE NPT Barrel Thread JIC Stem Thread NPT S6J6-P4 9/ /4" S8J10-P8 7/8-14 1/2" S8J12-P12 1 1/ /4" S16J16-P16 1 5/ " S20J20-P20 1 5/ /4" MALE JIC TO FEMALE JIC Barrel Thread JIC Stem Thread JIC S6J6-JF6 9/ /16-18 S6J8-JF8 3/4-16 3/4-16 S8J10-JF10 7/8-14 7/8-14 S8J12-JF12 1 1/ /16-12 S16J16-JF16 1 5/ /16-12 *S20J20-JF20 1 5/ /8-12 *S24J24-JF24 1 7/ /8-12 FEMALE NPT TO MALE NPT Barrel Thread NPT Stem Thread NPT S6PF4-P4 1/4" 1/4" S6PF6-P6 3/8" 3/8" S8PF8-P8 1/2" 1/2" S8PF8-P12 1/2" 3/4" S8PF12-P12 3/4" 3/4" S16PF16-P16 1" 1" FEMALE NPT TO FEMALE NPT Barrel Thread NPT Stem Thread NPT S6PF4-PF4 1/4" 1/4" S6PF6-PF6 3/8" 3/8" S8PF8-PF8 1/2" 1/2" S8PF12-PF12 3/4" 3/4" S16PF16-PF16 1" 1" *Available on Request - Minimum Order Quantities May Apply 5.17

158 Section 5 Accessories 9S Series/ psi/ balanced High pressure hydraulic swivel joints MALE JIC TO MALE JIC Barrel Thread JIC Stem Thread JIC 9S6J6-J6 9/ / S6J8-J8 3/4-16 3/4-16 9S8J10-J10 7/8-14 7/8-14 9S12J12-J12 1 1/ / S16J16-J16 1 5/ / S20J20-J20 1 5/ /8-12 MALE JIC TO MALE NPT Barrel Thread JIC Stem Thread NPT 9S6J6-P6 9/ /8" 9S6J8-P6 3/4-16 3/8" 9S6J8-P8 3/4-16 1/2" 9S8J10-P8 7/8-14 1/2" 9S12J12-P12 1 1/ /4" 9S16J16-P16 1 5/ " 9S20J20-P20 1 5/ /4" MALE JIC TO FEMALE NPT Barrel Thread JIC Stem Thread NPT 9S6J6-PF6 9/ /8" 9S6J8-PF6 3/4-16 3/8" 9S6J8-PF8 3/4-16 1/2" 9S8J10-PF8 7/8-14 1/2" 9S12J12-PF12 1 1/ /4" 9S16J16-PF16 1 5/ " MALE JIC TO MALE O RING Barrel Stem Thread JIC Thread UNO 9S6J6-O6 9/ / S6J6-O8 9/ /4-16 9S6J8-O8 3/4-16 3/4-16 9S8J10-O10 7/8-14 7/8-14 9S12J12-O12 1 1/ / S16J16-O16 1 5/ / S20J20-O20 1 5/ / *Available on Request - Minimum Order Quantities May Apply

159 Section 5 Accessories 9S Series/ psi/ balanced High pressure hydraulic swivel joints FEMALE NPT TO MALE NPT SEAL KITS S-Series Barrel Thread NPT Stem Thread NPT 9S6PU4-P4 1/4" 1/4" 9S6PU6-P6 3/8" 3/8" 9S8PU8-P8 1/2" 1/2" 9S12PU12-P12 3/4" 3/4" 9S16PU16-P16 1" 1" 9S20PU20-P20 1 1/4" 1 1/4" Seals as listed contain Dust and Fluid Seals with Retaining Rings, Balls and Plugs as applicable. Body Size Kit No. S6 S6-1 S8 S8-1 S16 S16-1 S20 S20-1 S24 S24-1 9S-Series Body Size Kit No. 9S6 9S6-1 9S8 9S8-1 9S12 9S12-1 9S16 9S16-1 9S20 9S20-1 *Available on Request - Minimum Order Quantities May Apply 5.19

160 Section 5 Accessories MTC Rotary Couplings Rotary couplings are used to connect two hydraulic lines that are moving simultaniously in different directions. Rotations can either be alternating or continuous. These couplings rotate on roller bearings and provide a perfect seal via special low friction seals. They can rotate under maximum pressure with low torque. Barrel BSPP-F Stem BSPP-M Speed RPM M.W.P. bar Max. Flow l/min GGIL01 1/4" 1/4" GGIL02 3/8" 3/8" GGIL03 1/2" 1/2" GGIL04 3/4" 3/4" GGIL05 1" 1" GGIL06 1-1/4" 1-1/4" GGIL07 1-1/2" 1-1/2" GGIL09 2" 2" Inline Coupling Barrel BSPP-F Stem BSPP-M Speed RPM M.W.P. bar Max. Flow l/min GG9001 1/4" 1/4" GG9002 3/8" 3/8" GG9003 1/2" 1/2" GG9004 3/4" 3/4" GG9005 1" 1" GG /4" 1-1/4" GG /2" 1-1/2" GG9009 2" 2" Coupling NB: When required - order separately a dowty seal to suit the BSPP threads (eg R04B-08). Ref page 4.42 of this catalogue PRESSURE TESTING DEVICES FOR HYDRAULIC, AIR AND VACUUM SYSTEMS * Includes bleeder screw and convenient hanger * Built-in pressure sensor protects low range gauges from high pressure * Compatible with most hydraulic fluids * Continuous system pressure readings are possible through pressure ranges PSI. GAUGE TYPE HOSE LENGTH (inches) LOW PRESSURE GAUGE* RANGE(psig) MEDIUM PRESSURE GAUGE RANGE(psig) HIGH PRESSURE GAUGE RANGE(psig) Net Price Std *Available on Request - Minimum Order Quantities May Apply

161 Section 5 Accessories GLYCERINE FILLED DUAL SCALE Digital Panel Mount (Inc s Panel Mt Kit) BOTTOM ENTRY Digital Panel Mount - Rear Entry - Dual Scale Line Mount - Bottom Entry - Dual Scale 63mm Diameter - Connection = 1/4 BSPP 63mm Diameter - Connection = 1/4"BSPP Diam BAR PSI Diam BAR PSI PG63PM PG63BE PG63PM PG63BE PG63PM PG63BE PG63PM PG63BE PG63PM PG63BE PG63PM PG63BE mm Diameter - Connection = 1/2 BSPP PG63BE PG100PM PG63BE-BOOT PROTECTIVE BOOT PG100PM mm Diameter - Connection = 1/2 BSPP PG100PM PG100BE PG100PM PG100BE PG100PM PG100BE PG100PM PG100BE PG100BE PG100BE PG100BE PG100BE-BOOT PROTECTIVE BOOT Line Mount - Bottom Entry - Digital - 1/4"BSPP PG80BE PG80BE-BOOT PPROTECTIVE BOOT Gauge Isolators Gauge Adaptors THREAD THREAD CP G CP G CP G CP G PORT BSPP MAX. PRESSURE BAR 1/4"BSPP-F 7/16"JIC-M 1/4"BSPP-F 9/16"JIC-M 1/2"BSPP-F 9/16"JIC-M 1/4"BSPP-F 9/16"JIC-F CS /16"JIC-F 7/16"JIC-F TYPE EMIL01A 1/4 250 A 180 EM9001A 1/4 250 A 90 HB1-PA 1/4" 400 Push To Read EM9001A EMIL01A HB1-PA Gauge Protective Boot Diameter PG63BE-BOOT 63MM PG100BE-BOOT 100mm PG80BE-BOOT 80mm *Available on Request - Minimum Order Quantities May Apply 5.21

162 Section 5 Accessories TEST POINTS - M16X2 (Test 20) SERIES TEST POINT COUPLNG A TYPE M16X2 SERIES MALE THREAD M W P BAR /8 BSPP /4 BSPP /8"BSPP /8 BSPT /4 BSPT /8"BSPT /8 NPT /4 NPT /16 UNO /16 UNO M10x M12x M14x M16x FEMALE THREAD M W P BAR /4"BSPP-F /16 JIC-F /16 JIC-F /4"JIC-F 345 Style 1 Style 2 TEST POINT TO GAUGE ADAPTORS A B Style THREAD A THREAD B M.W.P. (BAR) /4" BSPP-F M16 X 2 (M-B/HD) /2" BSPP-F M16 X 2 (M-B/HD) /4" BSPP-F M16 X 2 (F) /2" BSPP-F M16 X 2 (F) 630 TEST POINT HOSES 2mm ID MWP = 630 bar A B C L HOSE ASSEMBLIES 630BAR MWP (includes length in mm) NB: Use the highlighted part of the coupling in the hose assembly HOSE & COUPLING OPTIONS THREAD 6400 DN2 Hose 2mm ID Ferrule M16X2 (Test 20) /4"BSPP-F (60 Seat) /4 BSPP-F(gauge) /4"BSPP-F-90 (gauge) /2 BSPP-F /16 JIC-F /16 JIC-F NB: The listed hose assemblies have the coupling at one end, and the coupling at the other. For other options delete the listed codes from the model number and add the code for the desired thread type. Use an add & subtract to the list price for pricing *Available on Request - Minimum Order Quantities May Apply

163 Section 5 Accessories TEST POINT HOSES 4mm ID A B C L MWP = 500 bar HOSE & COUPLING OPTIONS THREAD 6700 DN4 Hose 4mm ID Ferrule M16X2 (Test 20) /4 BSPP-F (60 Seat) /4 BSPP-F(gauge) /8"NPT-Male /16 JIC-F /16 JIC-F NB: Use the highlighted part of the coupling in the hose assembly TEST POINT TEES Southcott test point tees provide a convenient method of taking pressure readings from any point in a hydraulic system. Compact in size, they can be fitted as a temporary or permanent installation at a cost-effective price. USA Test Point European Test Point Test 20 Port Plug DF04-1/14SAE-M C77-07 Male Thread JIC Female Thread Test Point Thread C27G /16" JIC-M 7/16" JIC-F 7/16" UNO-F C27G /16" JIC-M 9/16" JIC-F 7/16" UNO-F C27G /4" JIC-M 3/4" JIC-F 7/16" UNO-F C27G /8" JIC-M 7/8" JIC-F 7/16" UNO-F C27G /16" JIC-M 1-1/16" JIC-F 7/16" UNO-F C27G /16" JIC-M 1-5/16" JIC-F 7/16" UNO-F C27G /8" JIC-M 1-5/8" JIC-F 7/16" UNO-F Male Thread BSPP Female Thread Test Point Thread CP24G /4" BSPP-M 1/4" BSPP-F 7/16" UNO-F CP24G /8" BSPP-M 3/8" BSPP-F 7/16" UNO-F CP24G /2" BSPP-M 1/2" BSPP-F 7/16" UNO-F CP24G /4" BSPP-M 3/4" BSPP-F 7/16" UNO-F CP24G " BSPP-M 1" BSPP-F 7/16" UNO-F CP24G /4" BSPP-M 1-1/4" BSPP-F 7/16" UNO-F Male Thread ORFS Female Thread Test Point Thread F27G /16" UNF-M 11/16" UNF-F 7/16" UNO-F F27G /16" UNF-M 13/16" UNF-F 7/16" UNO-F F27G " UNF-M 1" UNF-F 7/16" UNO-F F27G /16" UNF-M 1-3/16" UNF-F 7/16" UNO-F F27G /16" UNF-M 1-7/16" UNF-F 7/16" UNO-F F27G /16" UNF-M 1-11/16" UNF-F 7/16" UNO-F *Available on Request - Minimum Order Quantities May Apply 5.23

164 Section 5 Accessories HYDRAULIC TUBE Cold Drawn Seamless Tube - Annealed ASTM A m Lengths Supplied in Full Lengths Only. Other Sizes and Gauges are Available on Request SIZE WORKING PRESSURE WITH 3:1 SAFTY FACTOR Wall Dim. WEIGHT PER Length UNPLATED Per 6.1M Length GOLD ZINC PLATED Per 6.1M Length OD(Inches) x GAUGE BAR PSI mm Kg Part No Part No 1/4 x 20g x 6.0m T0420 T0420P 3/8 x 16g x 6.0m T0616 T0616P 3/8 X 18g x 6.0m T0618 T0618P 1/2 x 16g x 6.0m T0816 T0816P 1/2" x 18g x 6.0m T0818 T0818P 5/8 x 14g x 6.0m T1014 T1014P 5/8 x 16g x 6.0m T1016 T1016P 3/4" x 12g x 6.0m T1212 T1212P 3/4 x 14g x 6.0m T1214 T1214P 3/4 x 16g x 6.0m T1216 T1216P 1 x 10g x 6.0m T1610 T1610P 1 x 12g x 6.0m T1612 T1612P 1 x 14g x 6.0m T1614 T1614P 1 x 16g x 6.0m T1616 T1616P 1.1/4 x 10g x 6.0m T2010 T2010P 1.1/2 x 10g x 6.0m T2410 T2410P 2 x 7g x 6.0m T3207 N/A NB: The above working pressure rating is based on BARLOWS Formula P = 2ST/D Where P = Burst (PSI) S = UTS (47000) T = Wall Thickness (inches) D = O.D. of tube (inches) NB: Pricing per 6.0m length *Available on Request - Minimum Order Quantities May Apply

165 Section 5 Accessories FLARELESS TUBE COMPRESSION FITTINGS Assembly Instructions INITIAL ASSEMBLY 1. Cut the tube squarely and deburr the end internally and externally. Clean all dirt and grit from I.D. and O.D. 2. Slide the nut and then the sleeve on to the tube. Make sure the tapered end of the sleeve points toward the nut. 3. Lubricate all mating surfaces of nut, sleeve and body with heavy lubricant. 4. Place end of tube against standard J.I.C. 37 Degree flare body. 5. Slide the sleeve and nut against body and tighten the nut onto the body hand Tight. Mark the nut in relation to the body for location. 6. Hold tube against body and tighten nut total of 1-1/4 turns for sizes 1/4" to 5/8" and 1-1/2 turns for sizes 3/4" to 1-1/4" REASSEMBLY 1. Slide nut against the body and tighten to Hand Tight. Mark the nut for location. 2. Tighten nut a minimum of one Hex flat. The Versa flare Flareless Tube fitting is designed for 10 reassemblies. TUBE O.D. JIC THREAD NUT SLEEVE 1/4 7/16 VN-04 VS-04 3/8 9/16 VN-06 VS-06 1/2 3/4 VN-08 VS-08 5/8 7/8 VN-10 VS-10 3/4 1 1/16 VN-12 VS /16 VN-16 VS /4 1 5/8 VN-20 VS-20 *Available on Request - Minimum Order Quantities May Apply 5.25

166 Section 5 Accessories Mikalor Supra W2 Clamps T-Bolt Clamps Stainless Steel Band & Zinc Plated Bolt & Trunnion Stainless Steel Band & Zinc Plated Bolt & Trunnion Sizes up to 304mm available on request Adjustment Range Suits Hose Type SP17-19 SP19-21 SP21-23 SP23-25 SP25-27 SP27-29 SP29-31 PROS19 SP GMV SP GMV PROS25 SP37-40 SP40-43 PROS32 SP GMV SP GMV PROS38 SP51-55 SP55-59 SP59-63 PROS51 SP GMV SP68-73 SP GMV SP79-85 SP GMV SP91-97 SP GMV SP SP SP SP SP SP SP SIZE Suits Hose Type PROS GMV PROS GMV PROS GMV GMV PROS PROS GMV GMV GMV GMV 5.26 *Available on Request - Minimum Order Quantities May Apply

167 Section 5 Accessories CLAMPS Micro-Gear Small Diameter Clamps Band and housing in 201/301 stainless steel. Band width 5/32" 1¼" hex head plated carbon steel screw. NB: Sold in Box quantities of 10 Clamps Clamping Range Imperial ()Metric (mm) Min Max Min Max /4 5/ /16 7/ Automotive General Purpose Band and housing in 201/301 stainless steel. Band width 1/2" 5/16" hex head plated carbon steel screw NB: Sold in Box quantities of 10 Clamps Clamping Range Imperial () Metric (mm) Min Max Min Max /8 7/ /16 7/ /2 1 1/ /2 1 1/ /16 1 1/ /4 1 3/ /4 2 1/ /2 2 1/ /4 2 3/ /4 3 1/ /2 3 1/ /4 3 3/ /4 4 1/ /2 4 1/ /2 5 1/ /2 6 1/ Pipe Retaining Clamp (P Clamp) Commonly used for retaining pipes, hoses, cables, tubing etc. The rubber liner absorbs vibration and also protects the product. NB: Sold in Box quantities of 5 Clamps Diam (mm) Band Width (mm) Mounting Hole (mm) *Available on Request - Minimum Order Quantities May Apply 5.27

168 Section 5 Accessories *An industrial heat gun is required POWERGRIP SHRINKBAND CLAMPS Ideal for use with TexSleeve hose protection Clamp Range (mm) SB SB SB SB SB SB SB SB SB SB SB SB SB SB SB *Available on Request - Minimum Order Quantities May Apply

169 Section 5 Accessories SWAGING MACHINES & CUT-OFF SAWS CS125 Up to 1" 2-wire CS132 Up to 1¼" 4-wire CS150 Up to 2" 4-wire CS250 Up to 2" 6-wire 12V or 24V DC Cut-off Saws 240V or 415V AC For the full range of Child Swaging Machines and Accessories please contact your nearest Child Distributor *Available on Request - Minimum Order Quantities May Apply 5.29

170 Warranty The Company warrants that the products sold by it shall be free from defects in either material or manufacture and will, provided written request to do so is made within 30 days after delivery, either repair or replace, at its option, items shown to the Company s satisfaction to have been defective at the time of delivery. This warranty comprises the sole and entire warranty pertaining to the Company s products and other terms, conditions or warranties, including but not limited to merchantability and fitness for any particular purpose, whether expressed or implied, are hereby excluded to the fullest extent permitted by law. No warranty is given on components made to other than the Company s design and is void on any product evidencing alteration from the Company s manufacturing specification. The Company liability under any statutory provision is limited to the repair, replacement or provision of any equivalent product, at its option. Except to the extent liability cannot by law be excluded or limited, the Company does not under any circumstances whatsoever accept liability for any contingent cost or consequential losses or any other liability whatsoever (except that under the above terms) which may in any way arise in the use of its products or any defect occurring in them. Technical information has been prepared from actual test results and is considered reliable but no responsibility can be presumed for its accuracy under varied field conditions. Child hose couplings are designed and manufactured to suit the nominated Gates or Child branded hose and are to be assembled strictly in accordance with instructions issued by the Company. The use of non-specified hose or assembly other than to Company instructions may produce an unsatisfactory and hazardous product. Warranty is void in such instances and any liability, expressed or implied, is totally disclaimed. The Company does not warrant the performance of weld-type adaptors, once welded (except by the Company, its servants or its selling agents). These welded products should be tested and proved fit for the use intended. Not testing, not proving, faulty fabrication or faulty welding may result in an unsatisfactory or even dangerous product. Suggestions on application, installation and care of the product are offered by the Company only as a guide to best practice and do not add to or otherwise vary the terms of the warranty. The Company s technical reference manuals provide dimensional and technical specifications to assist in the correct selection and application of Child and Gates products. Because of technological progress and product improvement, all design and dimensional data shown in this product guide is subject to change without notice. 5.30

171 CHILD MANUFACTURING WINGHAM NSW TAREE NSW ABN Office Locations EMERALD 77 Macauley Access Road EMERALD QLD 4720 Telephone (07) Fax (07) MACKAY 10/30-36 Margaret Vella Drive PAGET QLD 4740 Telephone (07) Fax (07) BRISBANE 45 Fulcrum Street RICHLANDS QLD 4077 Telephone (07) Fax (07) PERTH 1/1110 Abernethy Rd & Dundas HIGH WYCOMBE WA 6057 Telephone (08) Fax (08) ADELAIDE Southcott Manufacturing Athol Park ADELAIDE SA ADELAIDE Registered Head Office 243 Halifax Street ADELAIDE SA Telephone (08) Fax (08) DEVONPORT Lot 4, 6183 Frankford Road WESLEY VALE, TAS 7307 Telephone (03) Fax (03) LAVERTON 1/9 Everaise Court LAVERTON NTH, VIC 3026 Telephone (03) Fax (03) NEWCASTLE 4/14 Yangan Drive BERESFIELD NSW 2322 Telephone (02) Fax (02) SYDNEY 1/1A Gibbon Road BAULKHAM HILLS NSW 2153 Telephone (02) Fax (02) MELBOURNE Unit 5, 4 Federation Way Chifley Industry Park Moorabbin Airport MENTONE, VIC 3194 Telephone (03) Fax (03) melbourne.sales@southcott.com.au

172