2. Grades will be weighted as follows: Exp. 5 Report: 35% All other assignments: 55% Quizzes: 10%
|
|
- Harold Johns
- 5 years ago
- Views:
Transcription
1 ME 236 ermal Measurements [Laboratory] Fall 2012 Week Week of Topics. NOTE: Experiments not in order! Assignment PRIOR TO LAB 1 09/17/12 Experiment 1: Read Exp. 1 Introduction to Measurement Practice 2 09/24/12 Experiment 2: ermocouple Calibration and Study Read Exp. 2, Apps. A and B Turn in Exp. 1 Assignment Turn in Graph, Table, and Equation Assignment 3 10/01/12 Lecture on Temperature Measurement Turn in Exp. 2 Assignment 4 10/08/12 Experiment 3: Time Constant of ermocouples Read Exp. 3; Apps. A and B. Turn in ermocouple HW Assignment 5 10/15/12 Experiment 6: Introduction to DAQ and Analysis Read Exp. 6; App. B Turn in Exp. 3 Assignment 6 10/22/12 Preparatory Lecture for Experiment 5 Read Exp. 5, App. F 7 10/29/12 Experiment 5: Higher Heating Value of Turn in Exp. 6 Assignment Diesel Fuel 8 11/05/12 Groups work on Experiment 5 Report. Bring Turn in DRAFT Exp. 5 Report. in draft to discuss with instructor. 9 11/12/12 Experiment 4: Calibration of Pressure Transducer Turn in FINAL Exp. 5 Report Read Exp. 4; Apps. C, D, and E 10 11/19/12 NO LABS THIS WEEK (anksgiving) 11 11/26/12 Groups work on Exp. 4 assignment. NO LAB FINAL Material to be covered in Lecture Final Instructor: Glen orncroft Office: Phone: Text: Notes: ME 236 Course Pack, G. orncroft, El Corral Publications 1. e laboratory grade constitutes 30% of the course grade. You must obtain a passing grade in the lab by itself in order to pass the course. 2. Grades will be weighted as follows: Exp. 5 Report: 35% All other assignments: 55% Quizzes: 10% 3. Lab attendance is mandatory, and you must participate in an experiment in order to get credit for the associated assignment. 4. All laboratory assignments/reports are due at the beginning of the lab period. Late Policy: 10% grade deduction the day it is due; 20% deduction the next day; no credit thereafter. 5. ACADEMIC HONESTY: Sharing of work is cheating and will result in an F in the course. Except where explicitly stated by the instructor, there is to be NO COLLABORATION on assignments. You may only share RAW experimental data among your group members. You may NOT share spreadsheets, plots and graphs, equations, calculations, or any written material. 6. e above rule does not apply to group assignments, but be careful not to rely on group member s work. Your grade in the course depends on YOUR knowledge of the subject. See lecture syllabus for additional course policies.
2 Cal Poly State University San Luis Obispo, California General ME 236 Laboratory Safe Practice Procedures 1. Required Clothing. Unless the instructor specifically allows it, LONG PANTS AND CLOSE-TOED SHOES ARE REQUIRED AT ALL TIMES. Otherwise you will not be allowed to participate. 2. Personal Protective Equipment may be required. Equipment such as safety glasses or goggles, ear plugs, gloves, or steel-toed shoes, may be required with specific laboratory equipment or experiments. Specific warnings are listed below for this room and course. e laboratory manual will also provide warnings for specific experiments. Unless otherwise noted, YOU ARE RESPONSIBLE FOR BRINGING THESE WITH YOU TO THE LAB, and will not be allowed to participate without this equipment. 3. Know where general safety equipment is. Take note of the location and types of first aid supplies, safety equipment, fire alarm, telephone, MSDS binder, etc., available in the lab. See the list for this specific room, and take note of their locations. e instructor will provide information during the lab. 4. Use only the laboratory equipment the instructor allows. Do not use any equipment or tools without the instructor s permission. Do not touch any equipment in the laboratory that is not related to the experiment. 5. Instructor supervision required. Depending on the level of hazard of the experiment, some experiments require the instructor to be physically present at all times during operation. e instructor will provide you information on how to proceed if the instructor temporarily steps out. See specific laboratory guidelines that follow. 6. Working in the laboratory outside of the scheduled time. Students are not allowed to use laboratories outside the normal laboratory session without prior written authorization by the instructor. Absolutely no working by yourself in the laboratories. 7. Be safety conscious. Although we make every effort to identify hazards in the laboratory, you must also be diligent. Beware of common laboratory or equipment hazards (Secure long hair and loose clothing when working around rotating equipment or open heat sources, for example). Report any unsafe or hazardous condition in lab (liquid spills, electrical hazards etc.) to the instructor. 8. Report all incidents. Any accident or illness must be immediately reported to the instructor and/or the Mechanical Engineering Department office. 9. In case of an emergency: dial 911 and tell the dispatcher: 1. at you are calling from Cal Poly 2. Your name and location on campus 3. e nature of the emergency 10. Know the evacuation routes. To evacuate the building in an emergency follow routes posted near the exits of the building. e instructor will point these out. For general information go to Cal Poly Environmental Health and Safety:
3 Safe Practice Procedures Specific to this Room (13-203) 1. Mercury Barometer. Beware that the laboratory contains a mercury barometer. Although safely contained, mercury is a hazardous substance if spilled. Alert your instructor if the barometer breaks. 2. Food safe areas. Food is allowed in refrigerator, and consumption of food is allowed only at desks. 3. Safety equipment checklist. e following equipment is available in this room. Take note of their locations. First aid kit Eye Wash Blood-borne pathogens kit Mercury spill kit Telephone Fire Alarm Fire Extinguisher Fume hood MSDS Binder Bin of extra safety glasses 4. Evacuation Routes. Evacuation routes are posted at each exit. Specific to this Laboratory (ME 236): 1. Experiments using hot plates and boiling water. Several experiments make use of a hot plate to heat water, up to and including boiling. Use mitts provided with the experiment to handle the beakers. LONG PANTS AND CLOSE-TOED SHOES ARE REQUIRED. 2. Bomb Calorimeter. is experiment involves the use of high-pressure oxygen and combustion of a flammable substance in a pressurized cylinder. LONG PANTS AND CLOSE-TOED SHOES ARE REQUIRED. SAFETY GLASSES MUST BE WORN AT ALL TIMES. Hazardous substances like fuels must be measured inside the fume hood. Follow the safety procedures for pressurizing the bomb, igniting the mixture, and de-pressurizing the bomb when testing is complete. e instructor must supervise the first time you pressurize the bomb, ignite the mixture, and depressurize he bomb. e instructor must always be present in the lab during pressurizing, ignition, and depressurizing of the bomb. To prevent injury in case of rupture, do not, at any time, put your face above the calorimeter lid. To prevent injury, never place your hand or face in the stream of exhaust gasses when depressurizing the bomb. Never fill the bomb with more than 1.5 grams of fuel. Never charge the bomb to more than 25 atmospheres of pressure. For general information go to Cal Poly Environmental Health and Safety:
4 Cal Poly State University San Luis Obispo, California Course & Section No. Instructor s Name Quarter/Year Date I have received a copy of the attached Laboratory Safe Practice Procedures, I have read them, and the instructor has discussed them. Name No. Last First Signature
5 ME 236 Crasher Sign-up List (CRASHERS ONLY) No. Last Name First Name Cal Poly ONLY (make sure the address works!) Lectures MW MW Indicate which sections you could add W 12-3 Labs 3-6 F
2. Grades will be weighted as follows: Assignments 90% Quizzes: 10%
ME 236 Engineering Measurement and Data Analysis [Lab] Winter 2016 Week Topic Assignments Due at beginning of lab 1 Introduction to Read Intro to Measurement Practice in Lab Manual Measurement Submit Assignment
More information2. Grades will be weighted as follows: Assignments (weighting will vary) 90% Quizzes: 10%
ME 236 Engineering Measurement and Data Analysis [Lab] Spring 2017 Week opic Assignments Due at beginning of lab 1 Introduction to Read Intro to Measurement Practice in lab manual Measurement Submit assignment
More informationUniversity of New Haven DEPARTMENT OF CHEMISTRY and CHEMICAL ENGINEERING
University of New Haven DEPARTMENT OF CHEMISTRY and CHEMICAL ENGINEERING A. Instructions: Student: Read carefully the following laboratory rules, safety precaution, and regulations. Your laboratory conduct
More informationStudent Information & Laboratory Safety Contract
Student Information & Laboratory Safety Contract Mrs. Mawhiney Student Information Last Name First Name Preferred Name Home Address (including ZIP) Home Phone student e-mail Parent/Guardian Name Relationship
More informationSalt Lowers the Freezing Point of Water
Salt Lowers the Freezing Point of Water Topic Sodium chloride (NaCl), salt, lowers the freezing point of water. Introduction Salt is added to ice in ice cream freezers because salt lowers the freezing
More informationCHEMISTRY FACULTY LABORATORY SAFETY CONTRACT CENTRAL CAMPUS
CHEMISTRY FACULTY LABORATORY SAFETY CONTRACT CENTRAL CAMPUS Potential hazards exist in all chemical laboratories and some can cause serious accidents. Fortunately, most accidents can be prevented if each
More informationGuide to Safety in the Science Classroom
ECC Health & Science Building Guide to Safety in the Science Classroom SC 1000 Laboratory Safety for Students East Central College 1964 Prairie Dell Road ~ Union, Missouri 63084 Phone: (636) 584-6500 ~
More informationMAFES Horticultural Facilities AREA-SPECIFIC SAFETY TRAINING GUIDANCE
MAFES Horticultural Facilities AREA-SPECIFIC SAFETY TRAINING GUIDANCE Each University of Maine employee, Faculty, graduate student, and undergraduate shall take the University of Maine Basic Safety Training
More informationUNH Department of Forensic Sciences
UNH Department of Forensic Sciences LABORATORY SAFETY RULES, PRACTICES AND AGREEMENT (Professors, Graduate Students, Research Assistants, Teaching Assistants, Students Working on Research Projects and
More informationUniversity of Massachusetts Dartmouth
Page 1 of 7 University of Massachusetts Dartmouth College of Engineering Mechanical Engineering Department Best Laboratory Safety Practices This handbook intends to provide you with essential safety information
More informationEric Sheagley, Lab Supervisor Fall, 2015
CH 107, Intro to Chemistry Lab Portland State University Eric Sheagley, Lab Supervisor Fall, 2015 Description: CH 107 is the laboratory associated with the CH 104 Intro to Chemistry lecture. Concurrent
More informationSafety In the Science Lab
Lab Safety: Everyone Is Responsible! Safety In the Science Lab Rules and Symbols 7.4B use preventative safety equipment, including chemical splash goggles, aprons, and gloves, and be prepared to use emergency
More informationLaboratory Personal Protective Equipment & Hazard Assessment Tool
Laboratory Personal Protective Equipment & Hazard Assessment Tool This form must be completed by the person in charge of the laboratory, with the guidance of the Chemical Hygiene Officer to conduct a laboratory
More informationDepartment of Chemistry
[SKIDMORE COLLEGE] Department of Chemistry Laboratory Safety Handbook for Research Students and Lab Assistants Table of Contents Introduction... 1 Training and Documentation... 1 Laboratory Conduct and
More informationlongitudinal wave Figure 1 amplitude transverse wave Figure 2
Wave Pulses Topic A coiled spring can help visualize and explain interference and reflection of a wave. Introduction There are two types of waves, longitudinal and transverse. In a longitudinal wave the
More informationSafety In the Science Lab Rules and Symbols
Lab Safety: Everyone Is Responsible! Safety In the Science Lab Rules and Symbols Cornell Notes How to: Safety First Science is a hands-on laboratory class. You will be doing many laboratory activities,
More informationDeveloping Safety Guidelines for Cryogenic Liquids.
Developing Safety Guidelines for Cryogenic Liquids. Purpose: Develop a reference document that can be used by a Principle Investigator or a designee to assist in the development of Safety Operating Procedures
More informationMINIMUM SAFETY REGULATIONS
MINIMUM SAFETY REGULATIONS These rules are intended to apply to all students, postdoctoral fellows, and staff engaged in laboratory work in a working lab. A working laboratory is a room used for any purpose
More informationRUN TIME: 50 MIN PL02 Page 1 of 7 POGIL LAB EXERCISE 02 What Makes the Lab a Safe and Effective Place to Do Chemistry?
RUN TIME: 50 MIN PL02 Page 1 of 7 POGIL LAB EXERCISE 02 What Makes the Lab a Safe and Effective Place to Do Chemistry? Each member should assume their roles at this time (Table 1). Table 1. Group Member
More informationKaty Independent School District Science Safety Rules
Katy Independent School District Science Safety Rules PURPOSE Science is a hands-on laboratory class. You will be doing many laboratory activities which may require the use of hazardous chemicals or potentially
More informationMaking a Barometer and Using It
SCIENCE EXPERIMENTS ON FILE Revised Edition 2.5-1 Making a Barometer and Using It Topic Air pressure Time Varies! Safety Please click on the safety icon to view safety precautions. Materials large (1-gal)
More informationGeneral Safety Rules
General Safety Rules 1. The goggles provided by the university are to be properly worn at all times in the lab. 2. You are to be properly dressed in the lab. a. Close-toed shoes. b. At least a short sleeve
More informationPart A: 20 minutes plus 30 minutes setting time Part B: day 1, 20 minutes; then 5 minutes each day for about 5 days
The Bugs On Our Skin Topic Study of the microorganisms found on skin Introduction We spend considerable time cleaning ourselves, but we cannot rid ourselves of all the microbes on our bodies. Forensic
More informationLab: Safety Due: Lab # 0
Name: Lab Section: Lab: Safety Due: Lab # 0 Purpose Science is a hands-on laboratory class. You will be doing many laboratory activities which require the use of hazardous chemicals. Safety in the science
More informationSpace Dust. Part A: 1 hour Part B: 10 minutes on day 1, 20 minutes on each of several subsequent days
Space Dust Topic Investigating micrometeorites Introduction The media carry stories about meteorites coming toward the Earth, but the Earth is actually being constantly bombarded with dust and dirt otherwise
More informationHow Fast Is Your Toy Car?
SCIENCE EXPERIMENTS ON FILE Revised Edition 6.15-1 How Fast Is Your Toy Car? Daniela Taylor Topic Motion, calculating speed Time 1 hour! Safety Please click on the safety icon to view the safety precautions.
More informationSCIENCE LABORATORY SAFETY INSTRUCTIONS & CONTRACT
8 February, 2018 SCIENCE LABORATORY SAFETY INSTRUCTIONS & CONTRACT Dear Parents / Guardians This letter is to inform you of the College s efforts to create and maintain a safe Science laboratory environment.
More informationHow Environment-friendly Is Your Home?
How Environment-friendly Is Your Home? Topic Producing an environmental profile of the home Introduction More new houses are being built with the environment in mind. They can have energy-saving features
More informationDetermine the Velocity of a Softball
Determine the Velocity of a Softball Topic The time, distance, and direction that an object travels, along with the pull of gravity, determine the velocity of that object. Introduction The velocity of
More informationSafety rules must be followed
Welcome Welcome to VVC s Chemistry 100 Lab! This will be your first introduction to a Chemistry laboratory. There are a number of safety items to go through before you start your first experiment, so let
More informationSafety Rules for the Science Lab
Science 10 Safety in the Science Lab Name: Date: Block: Safety Rules for the Science Lab DRESS CODE 1. To protect your eyes from possible injury, wear safety goggles whenever you are working with chemicals,
More informationSTANDARD OPERATING PROCEDURE TEMPLATE
STANDARD OPERATING PROCEDURE TEMPLATE #1 CONTACT INFORMATION: Procedure Title Procedure Authors Impedance Analyzer User Protocol Yu-Hung Li & Sang Jong Kim Date of Creation/Revision 11-12-2011 Name of
More informationLaboratory Standard Operating Procedure: Cryogenic Liquids
I. THIS STANDARD OPERATING PROCEDURE (SOP) IS FOR A: Specific laboratory procedure or experiment Examples: synthesis of chemiluminescent esters, folate functionalization of polymeric micelles, etc. Generic
More informationEvery Contact Leaves A Trace
Every Contact Leaves A Trace Topic Locard s Exchange Principle Introduction This experiment tests Locard s Exchange Principle the principle put forward by Dr. Edmond Locard, director of the world s first
More informationAdaptations of Desert Plants
Adaptations of Desert Plants Topic The shape and surface area of a leaf are related to its ability to gain and release water. Introduction Deserts are biomes that present great difficulties to their inhabitants.
More informationTopic Seismographs measure the intensity of earthquakes.
Earthquake Intensity Topic Seismographs measure the intensity of earthquakes. Introduction Scientists have been rating the intensity of earthquakes since the late 1700s. The instruments that measure earthquake
More informationSafety in the Science Lab
Safety in the Science Lab 7.4B use preventative safety equipment, including chemical splash goggles, aprons, and gloves, and be prepared to use emergency safety equipment, including an eye/face wash, a
More informationUniversity of Saskatchewan Department of Mechanical Engineering Standard Operating Procedure # Mat0002
Procedure Title: General Chemical Usage Guidelines Minimum Review Requirements: Annually Creation Date: November, 2011 Date of Next Review: November, 2012 Creator of Procedure: Authorized by: Title Page
More informationBlood Spatter Inquiry
Blood Spatter Inquiry Topic The shapes of bloodstains are affected by the textures of surfaces on which they fall. Introduction When a droplet of blood comes in contact with a surface, it may or may not
More informationSCIENCE EXPERIMENTS ON FILE Revised Edition Tornado Model. Safety Please click on the safety icon to view safety precautions.
SCIENCE EXPERIMENTS ON FILE Revised Edition 2.16-1 Tornado Model Topic Wind Time 1 hour! Safety Please click on the safety icon to view safety precautions. Materials empty duplicator paper box knife or
More informationEnvironmental Engineering Laboratory General Guidelines for Safety Practices
Environmental Engineering Laboratory General Guidelines for Safety Practices Safety is as simple as ABC Always Be Careful AN EXPERIMENT DONE WELL IS... AN EXPERIMENT DONE SAFELY. 1. Think Safety First.
More informationBiology Lab Safety Procedures and Information
Biology Lab Safety Procedures and Information Health and safety are paramount values in science classrooms, laboratories and field activities. You are expected to learn, understand and comply with ACC
More informationLaboratory Safety Review Checklist One Shields Ave Davis, CA Phone: (530) Fax: (530)
http://safetyservices.ucdavis.edu Laboratory Safety Review Checklist One Shields Ave Davis, CA 95616 Phone: (530)752-1493 Fax: (530)752-4527 E-mail: researchsafety@ucdavis.edu U C Davis Environmental Health
More informationSafety & Class Contract
Safety & Class Contract Required of ALL High School Science Students I will:! Follow all instructions given by the teacher and/or in the lab handout.! Protect my eyes, face, hands, and body when involved
More informationWolfson Campus Natural Science Department. Biology Laboratory. Student Safety Contract
Wolfson Campus Natural Science Department Biology Laboratory Student Safety Contract July 2000 Wolfson Campus Student Safety Contract-Biology Laboratory Purpose The Biology laboratory is a hands-on learning
More informationNanoelectronics Lab, SR B14 Rules you must agree to follow for access
Rules you must agree to follow for access 1. Do not remove any tools or manuals from the lab. These must be kept in the lab for the lab to operate efficiently. 2. Do not remove any supplies. These are
More informationLecture Demonstrations Safety Manual & New Staff Induction
Lecture Demonstrations Safety Manual & New Staff Induction Overview The lecture demonstrations team provides and maintains demonstrations to lectures, tutorials and outreach. Demonstrations and equipment
More informationLaboratory Safety. ALARA Practices Attire Hazards Electricity Radiation Fire Signage Emergency response
Laboratory Safety ALARA Practices Attire Hazards Electricity Radiation Fire Signage Emergency response Safety Is Everyone's Top Priority Use common sense, think, learn, and pay attention ALARA As Low As
More informationMolecular Materials Research Center Beckman Institute California Institute of Technology
Molecular Materials Research Center Beckman Institute California Institute of Technology Long pants, and shirts that cover upper torso and upper arms are required. Safety glasses, lab coats, and gloves
More informationLABORATORY SAFETY INSPECTION
LABORATORY SAFETY INSPECTION DATE: P.I./LAB MANAGER(S): PHONE(S): DEPARTMENT: BUILDING: ROOM(S) INSPECTED: INSPECTOR(S): TIME IN: TIME OUT: TOTAL TIME: LAB TYPE: DISCIPLINE: General Laboratory Safety S
More informationPRE LABORATORY ASSIGNMENT: Lab Section Score: /10 READ THE LAB TEXT BEFORE ATTEMPTING THESE PROBLEMS!
EXPERIMENT # 6 Name: PRE LABORATORY ASSIGNMENT: Lab Section Score: /10 READ THE LAB TEXT BEFORE ATTEMPTING THESE PROBLEMS! 1. Calculate the height of a corresponding column of mercury (in mm) that is at
More informationLaboratory Safety Plan
Laboratory Safety Plan Introduction A laboratory safety plan is a document that describes the general rules of conduct and other information useful in helping to prevent laboratory incidents and to appropriately
More informationGeneral Guidelines: 1. Conduct yourself in a responsible manner at all times in the Art Classroom.
ART STUDENT SAFETY CONTRACT Purpose: Art is a hand-on class. You will be doing many activities in this room that will require the use of chemicals, tools and machines. Safety in the Art Room is the number
More informationLaboratory Safety Inspection Checklist
Conducted By: Date of Inspection: Location: Safety and Risk Management Office Laboratory Safety Inspection Checklist Principal Investigator/Supervisor: General Lab Housekeeping A M S NO NA Comments Laboratory
More informationLABORATORY SAFETY. A general overview
LABORATORY SAFETY A general overview INTRODUCTION Environmental protection, Occupational Safety and Health are the Responsibility of all staff, students and collaborators working at ETH. OBJECTIVES General
More informationNatural Reaction Boosters C. V. Krishnan
SCIENCE EXPERIMENTS ON FILE Revised Edition 5.50-1 Natural Reaction Boosters C. V. Krishnan Topic Catalysts Time preparation, 1 2 hour to completion, 1 hour for each of six trials, 1 2 hour for analysis!
More informationLab Safety MRS. WEBSTER
Lab Safety MRS. WEBSTER Essential Question What is the importance of Lab Safety? Objectives Locate and use Lab safety equipment Know the basic rules of lab safety in the classroom/lab Identify lab symbols
More informationStandard Operating Procedure
Standard Operating Procedure Use of liquid nitrogen filling station Date: 02-12-13 SOP Title: Principal Investigator: Room and Building: Lab Phone Number: Section 1 Process Use of liquid nitrogen filling
More informationStandard Operating Procedure
Standard Operating Procedure Read the EH&S Standard Operating Procedures Fact Sheet before filling out this form. Print out the completed form and keep a readily accessible hard copy in the lab (also keeping
More informationBehavior of the Simple Pendulum
6.27-1 SCIENCE EXPERIMENTS ON FILE Revised Edition Behavior of the Simple Pendulum Carl C. Duzen Topic The behavior of the simple pendulum Time 15 minutes for preparation, 40 minutes to completion! Safety
More informationAn Inuit Yo-Yo Sandra J. Walton
6.17-1 SCIENCE EXPERIMENTS ON FILE Revised Edition An Inuit Yo-Yo Sandra J. Walton Topic Centripetal force Time 20 minutes! Safety Please click on the safety icon to view the safety precautions. Allow
More informationHudson City School District. Student Safety Contract
Hudson City School District Student Safety Contract Purpose To all Students The following rules and regulations are extremely important to your safety in many areas of the school environment. Your instructor
More informationAppendix A: Induction check list
Appendix A: Induction check list Name This checklist is to be completed as part of inducting a new user in the Laboratory. Permission to begin work in the Laboratory will only be given once all relevant
More informationRoy G. Biv Charles W. McLaughlin
SCIENCE EXPERIMENTS ON FILE Revised Edition 6.25-1 Roy G. Biv Charles W. McLaughlin Topic Relationship between wavelength and frequency of light Time 1 hour! Safety Please click on the safety icon to view
More informationLaboratory Standard Operating Procedure: Carcinogens
I. THIS STANDARD OPERATING PROCEDURE (SOP) IS FOR A: Specific laboratory procedure or experiment Examples: synthesis of chemiluminescent esters, folate functionalization of polymeric micelles, etc. Generic
More informationStandard Operating Procedure
Standard Operating Procedure Cleaning Ni Columns Department: Date SOP was written: Date SOP was approved by PI/lab supervisor: 12/29/2012 Reviewed by: Principal Investigator: Internal Lab Safety Coordinator/Lab
More information2.017 Lab Rules and Safety Rm September 9, 2009 (Version 2) Dr. Harrison H. Chin
2.017 Lab Rules and Safety Rm. 5-007 September 9, 2009 (Version 2) Dr. Harrison H. Chin LAB RULES 1. WORK SAFELY IN THE LAB 2. POWER TOOL USE IS RESTRICTED 3. DO NOT WORK WITH CHEMICALS ALONE 4. CLEAN
More informationDensity and Stress in Plastics Mary V. McCrary
SCIENCE EXPERIMENTS ON FILE Revised Edition 5.25-1 Density and Stress in Plastics Mary V. McCrary Topic Density and birefringence of plastics Time Part A: 30 to 45 minutes; Part B: 30 to 45 minutes! Safety
More informationA. Preparation The laboratory exercises for each laboratory must be read before the laboratory period.
#1 - Objectives: Identify the locations of important safety information and equipment; Understand how to properly use safety equipment in the laboratory; Understand the importance of being prepared for
More informationLaboratory Safety Training. Environmental Health and Safety
Laboratory Safety Training Environmental Health and Safety Why You Need Lab Safety Training Hazardous materials and/or equipment. You need to understand the risks and how to mitigate them. OSU requires
More informationSection 1. Contact Information. Procedure Title: Procedure Author: Date of SOP Creation/Revision: Name of Responsible Person: Location of Procedure:
Western Carolina University Standard Operating Procedure for the use of Acetaldehyde This is an SOP template for a specific chemical or class of chemicals and is not complete until: 1) lab specific information
More informationLaboratory Safety Review Checklist One Shields Ave Davis, CA Phone: (530) Fax: (530)
http://safetyservices.ucdavis.edu Laboratory Safety Review Checklist One Shields Ave Davis, CA 95616 Phone: (530)752-1493 Fax: (530)752-4527 E-mail: ehsdesk@ucdavis.edu U C Davis Environmental Health and
More informationSection 1. Contact Information. Procedure Title: Procedure Author: Date of SOP Creation/Revision: Name of Responsible Person: Location of Procedure:
Western Carolina University Standard Operating Procedure for the use of Sodium amide This is an SOP template for a specific chemical or class of chemicals and is not complete until: 1) lab specific information
More informationStandard Operating Procedure for Solvent use in EMAL
Standard Operating Procedure for Solvent use in EMAL Solvents used in EMAL. Acetone Ethanol Methanol 2-Propanol Lacomit Solvent (contains Xylene) Location(s): Small amounts of solvents are used in all
More informationSAFETY ORIENTATION. University of Evansville Department of Chemistry
SAFETY ORIENTATION University of Evansville Department of Chemistry Safety Topics 1. Personal Protection and Proper Attire 2. Personal Hygiene and Conduct 3. Proper Handling of Chemicals 4. Safety Equipment
More informationBiosafety Level 2 (BSL2) Laboratory Safety Inspection Checklist
Conducted By: Date of Inspection: Location: Safety and Risk Management Office Biosafety Level 2 (BSL2) Laboratory Safety Inspection Checklist Principal Investigator/Supervisor: General Lab Housekeeping
More informationCompressed Gases Safety Program
Compressed Gases Safety Program Summary: Compressed gas cylinders can present a variety of hazards due to their pressure and /or contents. This program covers requirements which must be followed for the
More informationLaboratory Emergency Response & Incident Reporting Guide. Occupational & Environmental Safety Office Duke University Health System.
Laboratory Emergency Response & Incident Reporting Guide Occupational & Environmental Safety Office Duke University Health System Quick Reference Revised 2016 Blood/Body Fluid Hotline From a Duke phone...
More informationPromotion of Safety. Chapter 10 Intro to HST
Promotion of Safety Chapter 10 Intro to HST Using Body Mechanics Unit 1 Prevent strain and help maintain muscle strength Prevent injury to yourself and others Reasons for Using Body Mechanics Muscles work
More informationEach cryogenic liquid has its own specific properties, but most cryogenic liquids can be placed into one of three groups:
1.0 Purpose and Applicability 1.1 The purpose of this guideline is to ensure the proper management of cryogenic liquids in order to minimize exposure, accidental release, damage to equipment and injury.
More informationExperimental Design Unit. Grade 10 Science Ms. Hayduk
Experimental Design Unit Grade 10 Science Ms. Hayduk Safety Why is Safety Important? Why is safety important? Read the article. Discuss the following questions with the person next to you: What did the
More information1. Safety glasses are to be worn at all times in the laboratory except in the study area adjacent to the lab.
SAFETY RULES page 1 General Precautions 1. Safety glasses are to be worn at all times in the laboratory except in the study area adjacent to the lab. 2. No horseplay. This includes running, throwing of
More informationLaboratory Standard Operating Procedure: Acutely Toxic Substances
I. CONTACT INFORMATION Procedure Title Procedure Author Date of Creation/Revision: April 12, 2013 Name of Responsible Person Location of Procedure (The PI, Lab Supervisor, or Autonomous Researcher) (Building
More informationUNIVERSITY OF HOUSTON-CLEAR LAKE ENVIRONMENTAL, HEALTH AND SAFETY DEPARTMENT
Effective Date February 7, 2018 Number L 01 Subject Laboratory Safety Policy Reference SORM RMTSA Vol.III Ch. 7.13, 7.16, 7.18 Special Instructions None Distribution Laboratory Faculty & Staff Reevaluation
More informationLaboratory Safety Rules Holt High School (from )
[Jump to Biology Safety Contract] Laboratory Safety Rules Holt High School (from http://bama.ua.edu/~mtt001/labrules.htm ) 1. Students will work individually on some experiments, while other experiments
More informationJWS732, aerodynamics and propulsion laboratory users notes
JWS732, aerodynamics and propulsion laboratory users notes These notes are intended to be used as basic guidelines for operating procedures and processes for the JWS732, aerodynamics and propulsion laboratory
More informationHazard Communication Program. San José State University
San José State University One Washington Square San José, California Facilities Development and Operations Department July 11, 2012 Page intentionally left blank SJSU_Hazard Communication Program_2012-0711.docx
More informationSAFETY PLAN GEOTECHNICAL LABORATORY DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING UNIVERSITY OF UTAH
Rev. 2 10/13/01 Page 1 SAFETY PLAN GEOTECHNICAL LABORATORY DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING UNIVERSITY OF UTAH INTRODUCTION The University of Utah and the Department of Civil and Environmental
More informationSafety in the AP Biology Laboratory Lab
Safety in the AP Biology Laboratory Lab Purpose: The purpose of this laboratory experience is to identify hazards and to implement a plan to react and respond to a hazardous condition if it presents itself.
More informationLaboratory Standard Operating Procedure: Reproductive Toxins
I. CONTACT INFORMATION Procedure Title Procedure Author Date of Creation/Revision: April 12, 2013 Name of Responsible Person Location of Procedure Approval Signature (The PI, Lab Supervisor, or Autonomous
More informationHydrogen Cyanide (HCN)
(HCN) H224 H300 H310 H330 H370 This SOP is not a substitute for hands-on training. Print a copy and insert into your laboratory SOP binder. Department: Chemistry Date SOP was written: Wednesday April 25,
More informationLaboratory Self Inspection Checklist LAB01
Laboratory Self Inspection Checklist LAB01 General Chemical/Biological Laboratories Location Assessor Date This core checklist is provided by the Health and Safety Department as a template, which provides
More informationHigh School Safety Acknowledgment Form
High School Safety Acknowledgment Form Note to science teachers and supervisors/administrators: Safety is the most important part of a science lesson. This includes monitoring student behavior and taking
More informationUCSC Laboratory Standard Operating Procedure (SOP) Compressed Gas Cylinder Change for MOCVD and CVD Systems
UCSC Laboratory Standard Operating Procedure (SOP) Compressed Gas Cylinder Change for MOCVD and CVD Systems Department: Chemistry Date: 02/25/13 Principal Investigator: Yat Li Office Phone: Enter text.
More informationtechconnect CARPENTRY Objectives Unit 2 Workplace Safety TechConnect - STUDENT WORKBOOK 2-1 Workplace Safety - Unit 2
Unit 2 Workplace Safety techconnect One of the keys to working in any industry is the safety and health of the workers. The carpentry industry can be a dangerous industry in which to work if you do not
More informationLaboratory Standard Operating Procedure: Sensitizers
I. CONTACT INFORMATION Procedure Title Procedure Author Date of Creation/Revision: April 12, 2013 Name of Responsible Person Location of Procedure (The PI, Lab Supervisor, or Autonomous Researcher) (Building
More informationGeneral Laboratory Guidelines
Ruhr-Universität Bochum Lehrstuhl für Verfahrens- und Umwelttechnik Herr Prof. Dr.-Ing. M. Grünewald General Laboratory Guidelines Affects: Technikumslaboratorium IDN 02 / 733; 743 Technikumshalle IBN
More informationLab-Specific Standard Operating Procedure (LSOP)- Pyrophoric Chemicals
Office of the Vice President for Research Environmental Health and Safety Policies, Programs and Procedures Lab-Specific Standard Operating Procedure (LSOP)- Pyrophoric Chemicals Principal Investigator(PI):
More informationTopic 1: Safety in the Organic Chemistry Laboratory
Written by Danielle M. Solano Department of Chemistry & Biochemistry California State University, Bakersfield Recommended Resources Video ~ Lab Techniques & Safety: Crash Course Chemistry #21 http://www.youtube.com/watch?v=vrwrmiehr3a
More information