INSPECTION REPORT. FANGCAN 100% Carbon Badminton Racket FANGCAN GROUP LIMITED

Size: px

Start display at page:

Download "INSPECTION REPORT. FANGCAN 100% Carbon Badminton Racket FANGCAN GROUP LIMITED"

Kathryn Perkins
5 years ago
Views:

1 This file is the translation file for the testing report. The original file is at the end of the pages Z 2015Texting NO.002 No. : Sample Name: Consigner TJW(2015)0489 FANGCAN 100% Carbon Badminton Racket FANGCAN GROUP LIMITED Date 2015/3/12 QUANZHOU INSPECTION INSTITUTE FOR PRODUCT QUALITY Add: Quality Technic Inspection Complex Building, Citong East Road, Quanzhou, China Tel: Fax: Post Code: Website:

2 Property Checking: Consignment Total 4 Pages, No. 1st Page Sample Name FANGCAN 100% Carbon Badminton Racket Name FANGCAN GROUP LIMITED Item ARESR8 Address Consigner 404,QINGHUI BUILDING TANGYUANXIN VILLAGE, LINGXIU TOWN, SHISHI Trademark FANGCAN Tel Level High-Class Post Code Serial Number Production Date / Production unit Name 2015/3/2 Tel / The same as the Consigner Sample Quantity 8pcs Date of sample arrival 2015/3/4 Inspection Reference QB/T Badminton Racket Inspection Result All the items are proven qualified. Illustration 1. The Condition of the sample rackets: Meet the experimental requirements 2. The Performance index of the rackets do not Participate in the decision. For reference only. Inspection Date ~ Report Date 2015/3/12 Approval: Validation: Check: Organization:

3 Inspection Result: 1. The Specification of the High Class Racket: Total 4 Pages, No. 2nd Page All size units to millimeters Serial numbe r Inspection items Technical Requirements (High Class) Decision Principle n Ac Re Inspection Result Non Conformity Report Conclusion 1 The Length of the racket ~680 2 The Deviation of the Length 678±2-2~+2 3 The Width of the Racket ~202 4 The Length of the Headsize ~240 5 The Width of the Headsize ~188 6 The Quality of the racket (g) ~ The Length of the Balance ~279 8 The Diameter of the Headsize 0.85 All is Qualified The Deviation of Thickness 0~ Symmetric Point 0.4 for Headsize Width 0~ Skewness 11 Alice Racket 12 Appearance String Holes&Eyele t 2 There should be no additional appendages or projections. Should not put the string easily cut off. The Eyelet should not be broken. 0.5~ ~ 1.87 Both conform to Both conform to

4 Total 4 Pages, No. 3rd Page NO. Inspection Item Technical Request (superior quality) Judgement Principle n Ac Re Check Result Non Conforming item Conclusion Should be fully adhered or Sticky, in combination, with binding sufficient strength, no glue moiety overflow, viscose or inadequate clearance Grip Wrap firm, uniform, not loose Ferral and end-cap Fully assembled, no the defect to impede the appearance and drop easily Fully interlinked, racket Grommet string should not exceed the groove after strung 12 Appearance Hollow racket frame No foreign matter inside cause Murmur Text and graphics on the Clear, complete, smooth, not easy to drop racket Surface is smooth, clean Painting of metals and composite material and no injuries; plated coating film should have sufficient water rustproof effects, painting no flow lacquer, blistering and peeling

5 2. Superior racket performance index: Total 4 Pages, No. 4th Page NO. Inspection Item Check Result 1 String Tensile strength/n 230.6~ Elongation/% 8~10 3 Pressurization droop 10.3~11.4 Shaft Elasticity 4 Deformation 0.10~ Corrosion resistance level No corrosion 6 Compressive strength to the side of racket head/n 7 Compressive deformation amount to the side of racket head 0~2 8 Torsional strength/n.m All as Racket body deflection 24~28 10 The remaining deflection of racket body 0~ Torsion resistance 10~14 End of report! If you have any questions, please contact us at any time: Fangcan Group Limited Add.: 2nd Floor, Qinghui building, Behind the Fufeng market Phase II B2 building, Shishi, Fujian, China Zip code: TEL: FAX: Website: info@fangcan.com Below is the formal format for the inspection report.

INTRODUCTION TABLE OF CONTENTS

INTRODUCTION TABLE OF CONTENTS 2 INTRODUCTION Thank you for choosing Servometer to design and manufacture your unique, new electrodeposited bellows for your particular application. The definitions, formulas and design parameters inside