NOTES. ITT CONOFLOW - QUICK REFERENCE GUIDE Airpak, Filter-Regulator / Filter Only
|
|
- Margery Lamb
- 6 years ago
- Views:
Transcription
1 Airpak, Filter-Regulator / Filter Only FR95 Airpak, Filter Regulator GFH45, GFH75, GFH76 Airpak, Filter Regulators GFH20 Qualified Airpak GFX02, GFX04 Filter (no regulator) FR95 GFH45 GFH75 GFH76 GFH20 IEEE FR95 Maximum Supply () 250 psig 300 psig 300 psig 300 psig 200 psig GFX psig N/A GFX psig N/A Controlled Output Setting () 2. What is the controlled output setting: 7. What filtration rating is required: 8. What are the process connection sizes: 9. What type of mounting is required (line, panel or bracket): 10. Describe the application and expectations of the regulator: NPT Inlet / Outlet Connections Gauge Ports Product Dependant Flow (scfm) 35 Micron Polypropylene 40 Micron Stainless Steel 10 Micron Cellulose Relieving Non-Relieving ¼ ¼ ¼ ¼ ¼ 16 In / Out Only N/A 75 N/A N/A N/A N/A In / Out Only N/A 75 N/A N/A N/A N/A Diaphragm Seat Filter Element Selection Material Aluminum 303SS
2 Reduction Regulators - Low GH10 Manual Loading Regulator GH15 Miniature Regulator GH20/GH40 Service Regulator GH24/GH25 Reducing GH10 GH15 GH20 GH24 GH25 GH10 Maximum Supply () GH40 Controlled Output Setting () 0-3, 0-5, 0-15, 0-25, 0-35, 0-50, , 0-30, 0-60, , 0-60, , 0-60, /4 1 /4 1 /4 3 /8 1 /2 1 /4 2. What is the controlled output setting:» Is the system constantly flowing or dead ended: 7. What are the process connection sizes: 8. What type of mounting is required (line, panel or bracket): 9. Describe the application and expectations of the regulator: NPT Inlet/Outlet Connections Gauge Ports Product Dependant Flow (scfm) Diaphragm Seat Relieving Diaphrgam Seat Non-Relieving Nordel Neoprene Diaphragm Material Silicone Teflon Process Side Teflon Sandwich Soft Seat Neoprene Metal to Metal (STD) Valve Plug Seat Soft Seat Options Materials 20 Aluminum 303SS
3 Low - Specialty Regulators GH20VT - GH28VT GH20VT GH28VT GH22 GH30 Regulator Vacuum Ratio & Flow Boosting Back GH20VT, GH28VT Vacuum Regulators GH22 Ratio and Flow Boosting Relays GH30 Back Regulators GH21 Differential Regulators Specialty Regulators Maximum Supply () Hg 0-30 Hg 0-15 Hg 0-30 Hg 1:1, 1:2, 1:3, 2:1, 3:1 0-3, 0-5, 0-15, 0-25, 0-35, 0-50, Controlled Output Setting () ¼ 1.5 ¼ 1.5 ¼ 16 ¼ NPT Inlet/Outlet Connections Flow (scfm) Nordel Neoprene Silicone Diaphragm Material Teflon Sandwich Metal Standard Seat Options Soft Seat Neoprene 2-30 Valve Plug Soft Seat Materials Aluminum 303SS GH21XT 3 Fixed ¼ 2.5 GH41XT 3 Fixed ¼ 2.5 GH21F 3 Fixed w/needle Valve GH41F Fixed and Adjustable 3 Fixed w/needle Valve GH21AT Differential 0-5, 0-15, 0-25 (Downstream 0-35, 0-50, Service) GH41AT 0-5, 0-15, , 0-50, ¼ ¼ 1000 cc/m Air 100 cc/m Water 1000 cc/m Air 100 cc/m Water ¼ 10 SCFH ¼ 10 SCFH GH26XF 3 Fixed ½ 38 SCFM GH27XF 3 Fixed 3/ 8 38 SCFM GH31 Fixed Differential Fixed ¼ 10 SCFH 2. What is the controlled output setting (vacuum setting or ratio/differential pressure): 7. What are the process connection sizes: 8. What type of mounting is required (line, panel or bracket): 9. Describe the application and expectations of the regulator:
4 Low - Purge Assembly (Consist of Differential Regulator, Needle Valve and Flow Meter) GDH21 Purge Assembly Differential Regulator with Flow Indicator and Stainless Steel s Line and Panel Mount Options Multiple Diaphragm Material Options Metal to Metal Seated or Soft Seated Options GDH2112 Mounting Line Panel Output Setting () Fixed 1/4 Inlet / Outlet GDH to 200 cc/min. (water) GDH to 2.5 SCFH GDH213 3 Sight Feed Bubbler GDH214 3 Sight Feed Bubbler GDH to 250 cc/min. (water) GDH to 2.0 SCFH GDH to 4.0 GPH GDH to 2.0 SCFH GDH to 4.0 GPH GDH to 2.0 SCFH GDH21FR to 200 cc/min. GDH21FR to 2.0 SCFH 2. What is the process media: 3. What is the operating temperature: 4. What is the maximum flow required: 5. What are the desired materials of construction: 6. What are the process connection sizes: 7. What type of mounting is required (line or bracket): 8. Describe the application and expectations of the regulator: Flow (SCFM) Materials of Mounting Line Panel Output Setting () Fixed 1/4 Inlet / Outlet Flow (SCFM) GDH to 4.0 GPH Materials of GDH to 2.0 SCFH GDH to 200 cc/min. (water) GDH to 2.5 SCFH GDH to 250 cc/min. (water) GDH to 2.0 SCFH GDH to 4.0 GPH GDH to 2.0 SCFH GDH to 4.0 GPH GDH to 2.0 SCFH GDH to 4.0 GPH GDH to 2.0 SCFH
5 Reduction Regulators - High HP100 HP110 HP , 4-150, 5-250, , 4-150, 5-250, , 9-800, , , , HP HP500 HP , , 3-50, 3-100, HP HP635 HP700 HP100 / HP110 High - Diaphragm HP300 / HP400 High - Piston HP500 / HP610 / HP635 / HP700 High - Diaphragm HP600 High - Tied Diaphragm Maximum Supply () HP700 HP What is the controlled output setting: 7. What are the process connection sizes: 8. What type of mounting is required (line, panel or bracket): 9. Describe the application and expectations of the regulator: Controlled Output Setting () Relieving Inlet / Outlet Other Port Size & Gauge Ports Flow (Cv) Teflon Aluminum Non-Relieving Vespel 0-25, 0-50, 0-100, 0-150, , , Kel-F Diaphragm Seat Main Valve Seat Material 303SS 316LSS Hastelloy Monel N.A.C.E
6 High - Specialty Regulators HP200 Back - Diaphragm HP800 Back - Piston HP550 Steam Vaporizing - Diaphragm HP555 Electric Vaporizing - Diaphragm HP800 HP200 HP800 Regulator Back Maximum Supply () , 0-50, 0-100, , 0-800, , , , 0-600, , Controlled Output Setting () ¼ NPT Inlet/Outlet Other Port Size and Gauge Ports Are Optional Flow (Cv) Diaphragm Seat Selection Teflon Kel-F Non-Relieving Vespel Main Valve Seat Material 303SS 316LSS Elgiloy Hastelloy 0.19 ¼ N.A.C.E. HP550 HP555 Steam & Electric Vaporizing 2. What is the controlled output setting: 7. What are the process connection sizes: 8. What type of mounting is required (line, panel or bracket): 9. Describe the application and expectations of the regulator: 6-250, ¼ , ¼ 0.16
7 High and Low Panels CP220 Changeover Panel QMP905 Quick Mount Panel GPH05 / GPH06 / GPH10 Manual Loading Stations CP220 CP220 Panel Automatic Changeover Panel Supply () , 4-50, Controlled Output Setting () 1/4 NPT Inlet/Outlet Other Port Size and Gauge Ports Are Optional Flow Single Stage Dual Stage Regulator Cv QMP905 Quick Mount Panel 5-150, 6-250, Cv 0.16 SS Cv 0.06 DS GPH05 GPH06 Manual Loading Stations 0-15, 0-30, 0-60, 0-100, and 3-15 (0-100% Cal.br) 0-15, 0-30, 0-60, 0-100, and 3-15 (0-100% Cal.br) 10 SCFM 10 SCFM GPH , 0-30, 0-60, 0-100, and 3-15 (0-100% Cal.br) 10 SCFM 2. What is the controlled output setting: 7. What are the process connection sizes (for the CP220 and QMP905 Panels, is a CGA Fitting and Pigtails required): 8. Describe the application and expectations of the regulator:
8 Transducers - I/P - E/P - M/P - P/I GT210 / GT410 / GT610 I/P - E/P Transducer GT-2 Series E/P Transducer GT25 IEEE Transducer GT-6 Series M/P Transducer GT-8 Series I/P Transducer GPT82 P/I Transducer GT210 GT210 GT410 GT610 I/P Transducer E/P M/P P/I Input Signal 4-20, madc 0-5, 1-9 VDC Output Ranges 3-15, 3-27, 6-30 Flow (SCFM) 12 Linearity ±0.5% Approvals Intrinsically Safe Explosion Proof GT-2 Series 0-5 to 0-60 VDC 3-15, 3-27, to 5 ±1% GT25 IEEE 4-20, madc GT-6 Series 24VDC 115AC 3-15, 3-27, , 3-27, ±0.75% Time Duration 10, 12, 18, 20 Seconds N/A N/A GT-8 Series GPT , madc 0-5, 1-9 VDC 3-15, 3-27, , 3-27, , madc 0.15 to 5 N/A ±1% ±0.25% 2. What is the input signal: 3. What is the outlet pressure setting: 4. What is the process media: 5. What is the operating temperature: 6. What type of mounting is required (line, bracket, U-Bolt): 7. What type of approvals are required: 8. Describe the application and expectations of the transducer:
9 Actuators - Linear and Lever GB50 / GB51 / GB52 Linear Actuator GB53 / GB54 / GB55 Linear Actuator GB52S / GB53S Lever Actuator GB52U / GB53U / GB54U Yoke Actuator GB52S Actuator Linear Yoke Lever GB50 GB51 GB52 GB53 GB54 GB55 GB52S GB53S GB52U GB53U GB54U 2. What is the instrument signal: 3. What is the mode of operation if throttling (on increasing instrument signal the actuator stem extends or retracts): 4. What is the maximum stroke required: 5. What is the thrust required: 6. Is the application throttling or on-off: 7. What type of mounting is required: 8. What is the operating temperature: 9. Is there a fail safe mode of operation required (actuator stem extends or retracts on air failure or locks in last postion): 10. Describe the application and expectations of the actuator: Piston Diameter - Effective Area (cm²) (7) (12) (28.5) (50) (78) (123) Actuator / Level Stroke Operation (For Level Actuator value represents maximum level travel) Mode 1-1/8 1-1/ / Throttling On-Off
10 Positioners - Top and Side Mounted GJ11 - GJ14 Series Positioners GC31- GC34 Series Positioners GJ21 / GJ22 Series Positioners GP50 / GP51 / GP52 Series Positioners GJ21 - GJ22 Positioner Top Side GC31 1/ <1% GC32 1/ <1% GC33 1/ <1% GC34 1/ <1% GJ11 1/ <1% GJ12 1/ <1% GJ13 1/ <1% 1. Is the application for a top or side mounted positioner: 2. What is the maximum supply pressure: 3. What is the instrument signal: Operation Mode Single Double Acting Acting 4. What is the mode of operation (on increasing instrument signal the actuator stem extends or retracts): 5. What is the maximum stroke required: Actuator Stem Movement In Out Fail Safe Extend Retract Travel Maximum Supply () Linearity Positioner Top Side Operation Mode Single Double Acting Acting Actuator Stem Movement In Out Fail Safe Extend Retract Travel Maximum Supply () Linearity GJ14 1/ <1% GJ21 1/ <1% GJ22 1/ <1% GP50 3/ ±1% GP51 3/ ±1% GP52 3/ ±1% 6.Is there a fail safe mode of operation required (actuator stem extends or retracts on air failure): 7. What is the operating temperature: 8. Describe the application and expectations of the positioner::
11 Accessories - Snap Acting Relays GVB11 / GVB12 Snap-Acting GVB11 Elastomer Options 1 - Inlet 2 - Outlets Relay 2 - Inlets 4 - Outlets Maximum Supply Outlet Range Flow - Cv GVB Silicone Aluminum GVB What is the trip set point: 3. What are the materials of construction: 4. What is the process media: 5. What is the temperature: 9. Describe the application and expectations of the snap acting relay:
SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More informationAvenger Model 33M Installation & Operation Instructions
Avenger Model 33M Installation & Operation Instructions Manufacturing Contact Information A+ Corporation, LLC Call for expert product application assistance: 41041 Black Bayou Rd. Gonzales, LA 70737 Phone:
More informationPetro-Chemical & Analyzer Sampling Systems
Petro-Chemical & Analyzer Sampling Systems Pressure control solutions for your industry. The Tescom brand offers a comprehensive range of regulators, valves and changeover systems that are ideal for analyzer
More informationPetro-Chemical & Analyzer Sampling Systems
Petro-Chemical & Analyzer Sampling Systems Pressure control solutions for your industry. The Tescom brand offers a comprehensive range of regulators, valves and changeover systems that are ideal for analyzer
More informationProduct Overview A DIVISION OF MARSH BELLOFRAM
Product Overview P627 & P630 P627 Available with internal relief device - R627 version P627 & P630 - High Flow Regulators The P627 and P630 are spring loaded, direct-operated regulators for both low and
More informationPNEUMATIC ACTUATED INDUSTRIAL VALVES SERIES:
PRODUCT SPECIFICATION March 05 PNEUMATIC ACTUATED INDUSTRIAL VALVES SERIES: 1800 SIZES 2-1/2 to 12 INCHES Heavy Globe Control Valves Two-Way and Three-Way, Reciprocating Iron, Steel, or Stainless Steel
More informationPorter Analytical & Industrial Products
Porter Analytical & Industrial Products Porter Analytical & Industrial Products Engineered to Excel in Critical Applications The Porter Instrument Division of Parker Hannifin Corporation is a leading manufacturer
More information1200 Series Pressure Regulators
SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of
More informationBrooks Flow Controllers for Gas and Liquid Service Model FC 8744, Series FC 8800 and FC 8900
Data Sheet Flow Controllers for Gas and Liquid Service Brooks Flow Controllers for Gas and Liquid Service Model FC 8744, Series FC 8800 and FC 8900 Features and Benefits Flow controllers for high pressure
More informationHP/UHP Spring-Loaded Regulator
Description HP (High Purity) and UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise dead areas where contaminants
More informationDiscontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
More informationDescription Advanced Features Typical Applications
Series single stage, brass barstock line regulator Description Advanced Features Typical Applications The Series regulators are intended for secondary pressure control of noncorrosive, high purity or liquefied
More informationACTUATORS AND INSTRUMENTS
ACTUATORS AND 03 ADVANCED ACTUATORS AND FOR A COMPLETE VALVE CONTROL SOLUTION Koso Kent Introl LIMITED (KKI) supplies a full range of advanced actuators and associated instrumentation to complement its
More informationA BRIEF TUTORIAL ON GAS HANDLING EQUIPMENT
TABLE OF CONTENTS BACK PRESSURE REGULATORS...26 CGA CONNECTION DRAWINGS...102 CGA CYLINDER CONNECTIONS AND GASKETS...98 CHANGEOVER MANIFOLDS...60-63,65 CHECK VALVES...70 CONVERSION TABLES...103 CUSTOM
More informationModel 4000 Pressure Controller
FEATURES Multiple Configurations The 4000 series pressure controller can be configured into either proportional only or proportional plus reset mode with a minimum of parts. Rugged Design Die cast aluminum
More informationGP1 & GP2. Electropneumatic Regulators FOR PRESSURE CONTROL TO 1,000 PSI
GP1 & GP2 Electropneumatic Regulators FOR PRESSURE CONTROL TO 1, PSI GP1 & GP2 Functional Description The GP series control valve is an electronic pressure regulator designed to precisely control the pressure
More informationProduct Overview A DIVISION OF MARSH BELLOFRAM
Product Overview P627 & P630 P627 P627 & P630 - High Flow Regulators The P627 and P630 are spring loaded, direct-operated regulators for both low and high pressure applications in the oil and gas industries.
More informationLesman Level Instrumentation LSB100/300 Series Basic Bubbler System
Lesman Level Instrumentation LSB100/300 Series Basic Bubbler System PART 1: GENERAL 1.1 SCOPE A. This section describes the specifications of a bubbler system. B. The following information shall be described
More informationJR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE
JR Series Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves
More informationPRO-50 Instrument Supply Regulator
Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits
More informationBrooks Flow Controllers for Gas and Liquid Service Model FC 8744, Series FC 8800 and 8900
Data Sheet Flow Controllers for Gas and Liquid Service Brooks Flow Controllers for Gas and Liquid Service Model FC 8744, Series FC 8800 and 8900 Model FC 8800 Flow Controller Model 1350/55 with FC 8900
More informationBL68 - Olympian Plus, plug-in system Filter/regulators and lubricators
>> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
More informationPorter Lab & Analytical Products
Porter Lab & Analytical Products Porter Lab & Analytical Products Engineered to Excel in Critical Applications The Porter Instrument Division of Parker Hannifin Corporation is a leading manufacturer of
More informationSERIES 30. Spring Operated Tank Blanketing Valve PROTECTOSEAL.
SERIES 30 PROTECTOSEAL 1 2" NPT inlet and outlet standard Direct acting valve mechanism Optional flanged or threaded inlet and outlet connections available Inlet gas pressures from 10 PSIG to 200 PSIG
More informationSG3 Series Regulators - Pressure Reducing
SG3 Series Regulators - Pressure Reducing DSG333X1 Specifications For questions about this product, please consult TESCOM. OPERATING PARAMETERS Pressure rating per criteria of CGA E-4; ASME B31; ASME BPVC
More informationREGULATORS FOR SPECIFIC APPLICATIONS
SINGLE-STAGE REGULATORS FOR NITROUS OXIDE AND CARBON DIOXIDE (MODELS SG9011, SG9012, SG9014) Nitrous Oxide and Carbon Dioxide frequently cause ordinary regulators to freeze up. Models SG9011, SG9012 and
More informationMEGR-1627 Instruction Manual
MEGR-1627 HIGH FLOW GAS REGULATOR Instruction Manual- Look Inside For: Description Installation Remote Vent Line Installations Startup and Adjustment Shutdown Maintenance Body Maintenance Procedures Diaphragm
More informationTechnical Instructions
Technical Instructions IS-P-596MI Flowrite II Iron ody Series 596 MI Description n Powers Flowrite II Water Mix (MI) Valves combine hot and cold water proportionally to satisfy the demands of the controlling
More informationBULLETIN FOR ACCURATE INDICATION AND CONTROL OF GAS AND LIQUID FLOW IN LOW RANGES.
BULLETIN 20-7000 ROTAMETERS PURGE FOR ACCURATE INDICATION AND CONTROL OF GAS AND LIQUID FLOW IN LOW RANGES. INTRODUCTION McCrometer purge rotameters are precision-made instruments designed to accurately
More informationSG1 Series Regulators - Pressure Reducing
SG1 Series Regulators - Pressure Reducing DSG131X Specifications For questions about this product, please consult TESCOM. OPERATING PARAMETERS Pressure rating per criteria of CGA E-; ASME B31; ASME BPVC
More informationLGSS Liquefied Gas & VSS Vapor (Gas) LGSS VSS LGSS. Features and Benefits
N LGSS Liquefied Gas & VSS Vapor (Gas) Sampling Systems The SENSOR Cylinder Sampling Systems allow collection of samples from gas and light liquid hydrocarbon applications in a manner that is safe to both
More informationAir Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
More informationType 1098-EGR. Pilot-Operated Valve Link Regulators. Features. Fisher Controls
Type 1098-EGR and Type 1098H-EGR VL1000 FIELDVUE Pilot-Operated Valve Link Regulators Fisher Controls January 1982 Bulletin The Type 1098-EGR and Type 1098H-EGR regulators (figure 1) provide economical
More informationFILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2
FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel L Compact /, High Flow / - / Air service equipment Series FEATURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment
More informationSG2 Series Regulators - Pressure Reducing
SG2 Series Regulators - Pressure Reducing DSG2232X Specifications For questions about this product, please consult TESCOM. OPERATING PARAMETERS Pressure rating per criteria of CGA E-; ASME B31; ASME BPVC
More informationJR Series. Gas Pressure Reducing Valves. a division of Jordan Valve GAS PRESSURE REDUCING VALVES
a division of Jordan Valve JR Series Gas Pressure Reducing Valves GAS PRESSURE REDUCING VALVES The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and
More informationTECHNICAL INSTRUCTIONS Iron Body Series 597 SI
UTILITY IRON BODY CONTROL VALVES TI 597SI UTILITY IRON BODY SERIES DESCRIPTION The rugged Powers Type SI (single seat iron body) balanced valve is primarily used for steam and water modulating applications
More informationMWEA MAINTENANCE SEMINAR SPECIALTY VALVES POWER GLOBES
MWEA MAINTENANCE SEMINAR SPECIALTY VALVES POWER GLOBES J O H N G. H U N T E R Types of Valves P A U L M A R C H I Accessories Principals of Operation Maintenance Control Valve Types Common Problems Key
More informationALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
More informationQBS Electronic Pressure Regulator
INSTALLATION AND MAINTENANCE INSTRUCTIONS DESCRIPTION / IDENTIFICATION The QBS stainless steel series is an electronically controlled pressure regulator. The QBS controls the pressure on its output port
More informationALE-32. Miniature General Purpose Regulators R07, R46 (non-repairable) Air line equipment. Technical data
ir line equipment Miniature eneral Purpose egulators 7, (non-repairable) 7 Full flow gauge ports Snap action knob locks pressure setting when pushed in Standard relieving models allow reduction of outlet
More informationPRODUCT CATALOG ELECTRO-PNEUMATIC PRESSURE REGULATORS & FLOW CONTROLLERS PRESSURE FLOW FORCE TENSION POSITION TORQUE VACUUM
ELECTRO-PNEUMATIC PRESSURE REGULATORS & FLOW CONTROLLERS PRESSURE FLOW FORCE TENSION POSITION TORQUE VACUUM PRODUCT CATALOG 1 PRESSURE CONTROL QBX, Vacuum-175 PSI, 1.2 SCFM...4-5 QBS, Vacuum-500 PSI, 1.2
More informationPILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660
PILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660 Patent Protected Premium Seat Tightness to Set Pressure Snap or Modulating Valve Action Provides Ability to Meet Clean Air Act Requirements 600 TYPICAL
More informationCash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified
Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot
More informationBest Practices for Installation of Gaseous Sample Pumps
Best Practices for Installation of Gaseous Sample Pumps Goal of the Gas Sample Pump Transport a clean, reliable, sample of the process gas to the analyzer, in the safest and easiest way possible, to ensure
More informationJSR Series. Sanitary Valves JSR Series Ultra-High Pressure Reducing Valves. High Purity Bio-Pharma Gas Pressure Reducing Valves.
JSR Series High Purity Bio-Pharma Gas Pressure Reducing Valves JSR is the first high purity gas pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. Traditionally,
More informationSSL. Smart Valve Positioner.
Smart Valve Positioner Smartest valve control device meeting a dynamic performance and a precise setting with a piezoelectric technology and an optimized auto-calibration program Features Auto-Calibration
More information670 Series Panel-Mounted Loading Regulators
November 1992 Bulletin 62.3:670 670 Series Panel-Mounted Loading Regulators The Types 670, 6, 674, and 675 panel-mounted loading regulators (figures 1, 2, 3 and 6) are compact, rugged units used primarily
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
More informationIndustrial. Quality, Dependability, Service. Reputation Built on. com. Innovative Solutions
Industrial Regulators Reputation Built on Quality, Dependability, Service. TABLE OF CONTENTS Get Consistent Quality By involving every employee in our ISO 9001:2000 Quality Assurance Program, you can count
More informationModel Series 62 Constant Differential Relay
Siemens Industry, Inc. INSTALLATION AND SERVICE INSTRUCTION INTRODUCTION Model Series 62 Constant Differential Relay Rev 11 March 2011 Supersedes Rev 10 The Constant Differential Relay maintains a constant
More informationSeries 1, 3 and 4 Cv = /8" and 1/4" Ported Manually Operated Valves. 3-way/2-position, 5-way/2-position, 5-way/3position
Cv =.52 -.73 Series, 3 and 4 Cv =.52.3 /8" and /4" Ported Manually Operated Valves 3-way/2-position, 5-way/2-position and 5-way/3-position Ports /8 and /4" NPTF The Series (/8 & /4", 3-way/2-position and
More informationIndex 7.1. Page R2 12/99
High Equipment Air Operated s High Equipment Company offers five lines of air operators to accommodate remote operation of pressure valves up to 00,000 psi. Various models of diaphragm and piston operated
More informationINSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator
INSTRUCTION MANUAL CVS P37 LP Gas Reducing Regulator The CVS Controls P37 Regulator is a non-relieving, pressure reducing regulator suitable for use in LP gas applications (Natural Gas and Propane). As
More informationTypes 1098-EGR and 1098H-EGR Pressure Reducing Regulators
Types 1098-EGR and 1098H-EGR Pressure Reducing Regulators July 2008 Differential as low as 1 psid (70 mbar d) Materials of Construction Compatible with Below Grade Installations Quick Change Trim Package
More informationType 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator
January 2009 Type 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator Introduction The Type 310A pilot-operated high-pressure regulator (Figure 1) is used where high capacity
More informationPneumatic Powered - Plunger Pumps
Models 42/62/82 D Series P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pumps Suggested Installation & Operating Instructions
More informationIntroduction to Pneumatics
Introduction to Pneumatics Pneumatics Symbols Air generation and distribution Table 1: Symbols use in energy conversion and preparation ITEM SYMBOL MEANING Compressor SUPPLY Pressure Source Pneumatic Pressure
More informationHip Air Operated Valves
Hydraulic & Offshore Supplies Hip Air Operated s YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Air Operated s High Pressure Equipment Company
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationElectropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765
Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765 Application Single-acting positioner for attachment to pneumatic control valves. Supplied with either an electric input signal from
More informationJSRH Series. Sanitary Valves JSRH Series High Flow Pressure Reducing Valves. High Flow Bio-Pharma Clean Gas Pressure Reducing Valves
JSRH Series High Flow Bio-Pharma Clean Gas Pressure Reducing Valves The JSRH Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. It may also be
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationCASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
More informationData Sheet B-Series Switches Pressure, Differential Pressure & Hydraulic
FEATURES Adjustable setpoints 15-100% of range Fixed or limited adjustable deadband Wide selection of switch elements Explosion proof enclosure provides uncompromising protection Special designs for NACE
More informationThe Shand & Jurs Model Vapor Guard Tank Blanketing Valve
Lower maintenance due to fewer parts Occupies less space, less stress to tank Teflon is inert to most chemicals; extends service life Simplifies and lowers maintenance cost Optimizes flow of blanketing
More informationF68G - Olympian Plus plug-in system General purpose filter
> > Port size: /... / (ISO G/ PTF) > > Olympian Plus plug in system > > Large filter element area provides minimum pressure drop > > Effective liquid removal and positive solid particle filtration Technical
More informationType 99 Pressure Reducing Regulators
Type 99 Pressure Reducing Regulators Bulletin 71.2:99 July 2008 W6527 W2676 D100138X012 www.emersonprocess.com/regulators Features Wide Variety of Applications Natural gas distribution systems, gas supply
More informationJSRH Series. Sanitary Valves JSRH Series High Flow Pressure Reducing Valves. High Flow Bio-Pharma Clean Gas Pressure Reducing Valves
JSRH Series High Flow Bio-Pharma Clean Gas Pressure Reducing Valves The JSRH Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. It may also be
More informationMATHESON s LaserPro Gases and Gas Delivery Equipment
MATHESON s LaserPro Gases and Gas Delivery Equipment MATHESON s LaserPro Support Gases and Services MATHESON delivers the LaserPro line of gases specifically designed to meet the stringent purity requirements
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
More informationChoosing the right miniature instrument and control valve is a snap
Choosing the right miniature instrument and control valve is a snap INVALCO Micro Valve The Micro Valve is a unique miniature valve offering versatility and rugged construction. Since its introduction
More informationElectropneumatic Transducer (I/P) Installation, Operation and
Nitra NCP1 Series Electropneumatic Transducer (I/P) Installation, Operation and Maintenance Instructions Ordering Information Contents Part Number I/P Transducers Output Range Input psig bar Section Description
More informationThe Ins and Outs of I/P Transducers
The Ins and Outs of I/P Transducers By Mark B. Levine, ControlAir Inc. General description I/P transducers are versatile instruments that use an electrical control signal to proportionally regulate gas
More informationVariable Area Flow Meters
Variable Area Flow Meters Over sixty years of variable area meter expertise Brooks started designing and manufacturing variable area (VA) meters, also referred to as rotameters, in 1946. Now, with more
More informationType 1367 High-Pressure Instrument Supply System with Overpressure Protection
Instruction Manual D100343X012 Type 1367 November 2017 Type 1367 High-Pressure Instrument Supply System with Overpressure Protection TYPE 252 FILTER 2ND-STAGE TYPE 67CF FILTER-STYLE REGULATOR INLET TYPE
More information4150K and 4160K Series Wizard II Pressure Controllers and Transmitters
Instruction Manual Form 5177 March 1999 4150K and 4160K Series 4150K and 4160K Series Wizard II Pressure Controllers and Transmitters Contents Introduction.............................. 2 Scope of Manual.............................
More informationLiquid Level Controllers
Liquid Level Controllers ALL PUMPS LLC-2Y For both pump up and down control. Variable On/Off set points. NDP-15/20/25/32, DP-10/15 & *NDP-40/50/80 LLC-1 Pump up and down versions available. 6 to 12 differential
More informationSuggested Installation & Operating Instructions for Sidewinder Pumps
Model 164 C P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pump Suggested Installation & Operating Instructions for Sidewinder
More informationModel PRS-07i. Stainless Steel Low Pressure, In-Line Pressure Regulator (Reducing Valve)
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRS-07i Stainless Steel Low Pressure, In-Line Pressure
More informationCVI Valve Line. Exceeds the industry s highest standards for reliability and performance
CVI Valve Line Exceeds the industry s highest standards for reliability and performance Available in the most standard models with the shortest lead times in the industry Exceptional quality every CVI
More informationANDERSON GREENWOOD TANK BLANKETING REGULATORS
Part of a complete system that incorporates a pilot operated, dome-loaded diaphragm type regulator capable of reducing blanketing gas in a single step, providing bubble-tight shut-off and low maintenance.
More information1800CPB2 Service Regulators
SB 8520.5 1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG Table of Contents 1800CPB2 Regulator Information................ 2-3 1800CPB2 Capacity Performance................ 4-6 1-1/4" Models,
More informationINSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION
INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic
More informationISQB1 INTRINSICALLY SAFE ELECTRO-PNEUMATIC CONTROL VALVE INSTALLATION & MAINTENANCE INSTRUCTIONS HAZARDOUS AREA CLASSIFICATION
PROPORTION AIR ISQB1 INTRINSICALLY SAFE ELECTRO-PNEUMATIC CONTROL VALVE INSTALLATION & MAINTENANCE INSTRUCTIONS Hazardous area classification Description / identification General specifications Connection
More informationTypes 1098-EGR and 1098H-EGR Pressure Reducing Regulators
Types 1098-EGR and 1098H-EGR Pressure Reducing Regulators January 2016 Differential as low as 1 psi / 70 mbar Materials of Construction Compatible with Below Grade Installations Quick Change Trim Package
More informationSERIES 10. Pilot Operated Tank Blanketing Valve, 2" PROTECTOSEAL.
SERIES 10 PROTECTOSEAL 2" NPT inlet and outlet standard Pilot operated design provides tight operating band Optional inlet and outlet connections available Inlet gas pressures from 40 PSIG to 130 PSIG
More informationPNEUMATIC ACTUATED INDUSTRIAL VALVES SERIES:
PRODUCT SPECIFICATION August 2006 PNEUMATIC ACTUATED INDUSTRIAL VALVES SERIES: 5800 SIZES 1/2 to 4 INCHES Compact Globe Control Valves Two-Way, Linear, Steel or Stainless Steel Body Valves for Process
More informationLife Sciences. Pressure control solutions for your industry.
Life Sciences Pressure control solutions for your industry. Ultra-clean hygienic pressure control: a cost-effective solution! From process air and clean steam to specialty gas control, you ll find TESCOM
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
More informationWelker Sampler. Model GSS-1. Installation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Sampler Model GSS-1 The information in this manual has been carefully checked for accuracy and is intended to be used as a guide to operations. Correct
More information1800C and 1800C-HC Service Regulators
SB 855.9 800C and 800C-HC Service Regulators Maximum Pressure 5 Table of Contents 800C Regulator Information...................... 800C-HC Regulator Information.................. 800C and 8C Service Regulators...............
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationPressure and/or Temperature Pilot Operated Steam Regulators Series 2000
Hoffman Specialty Regulators Regulators Pressure and/or Temperature Operated Regulators Series 2000 The Hoffman Specialty Series 2000 consists of main valves, pilot valves, wells and hardware kits. They
More informationFLOAT OPERATED LEVEL CONTROLLER
PNEUMATIC LEVEL SWITCH NO RELAY APPLICATION: Liquid level controller for oil and gas separators, water knockouts, gas scrubbers and accumulators. FEATURES: Push-button dump valve override standard Float
More informationINSTALLATION & MAINTENANCE INSTRUCTIONS
DESCRIPTION / IDENTIFICATION The QBX series valve uses Proportion-Air closed loop technology for Pressure control. It gives an output pressure proportional to an electrical command signal input. The QB1X
More informationPILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT
PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT Model Number Model Description Page # Pilot operated Relief Valves Pilot Operated Relief Valves 3-27 Operation
More information61 Series Pilots for Pilot-Operated Pressure Reducing Regulators
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally
More information