PolySwitch Resettable Devices Surface-mount Devices

Transcription

1 PolySwitch Resettable evices Surface-mount evices PolySwitch surface-mount devices are the preferred circuit protection method for computer, consumer, multimedia, portable, and automotive electronics applications. In an effort to reduce the size and cost of surface mount devices, we introduced the minism product series in Subsequently, we developed the microsm, nanosm and picosm family of products. The picosm series reduced the device size to a 2012mm (0805 mils) foot print, one fourth the size of the popular minism series. Recent additions to the PolySwitch surface-mount series include 24V minism 4532mm (1812 mils), 60V decasm 5050mm (2018 mils), and 2.0 microsm 3225mm (1210 mils) devices. PolySwitch Resettable evices Surface-mount evices enefits Smaller size saves board space and cost Many product choices give engineers more design flexibility ompatible with high-volume electronics assembly ssists in meeting regulatory requirements igher voltage ratings allow use in new applications pplications omputer Portable electronics Multimedia Game machines Telephony and broadband Mobile phones eatures RoS compliant roadest range of resettable devices available in the industry urrent ratings from 0.05 to 3 Voltage ratings from 6V computer and electronic applications to 60V telecom applications gency recognition: UL, S, TÜV Small footprint ast time-to-trip Low resistance utomotive Industrial controls attery 131

2 Protection pplication Selection Table for Surface-mount evices The table below lists PolySwitch devices and Siar devices typically used in these applications. Specifications for the suggested PolySwitch surface-mount device part numbers can be found in this section. Once a part has been selected, the user should evaluate and test each product for the intended application. Protection pplication dditional omments adapter input power use w/ Zener & triac SM250 SM250 SM200 attery pack protection nanosm0 minism260 minism190 harger protection nanosm050 minism110/16 nanosm075 PU/I protection nanosm110 nanosm0 nanosm075 ata acquisition/sensor microsm005 - microsm005 input/output power 6V nanosm075 nanosm0 nanosm050/ V minism075 minism110/16 minism075 nanosm075 nanosm110 nanosm050/13.2 evice ay system 12, 20 minism200 minism260 minism minism260 SM300 minism200 thernet/lan nanosm050/13.2 minism110/16 nanosm075 an microsm035 microsm050 microsm035 MI picosm035 picosm035 picosm035 I 802.3af VOIP decasm050/60 decasm050/60 decasm050/60 I-1394 power provider SM/33 SM185 SM/33 alt. power provider SM185 SM185 SM0/33 self-powered SM185 SM185 SM0/33 L inverter nanosm050/13.2 minism110/16 nanosm075 L screen power nanosm050/13.2 nanosm050/13.2 microsm035 LN (Low Noise lock) SM075 SM075 SM050 Motor 6V nanosm110 nanosm0 microsm V minism075 minism110/16 minism075 PS/2 mouse/keyboard nanosm075 nanosm110 nanosm050/13.2 Signal - data communication 6V nanosm075 nanosm075 nanosm V minism050 minism075 minism020 30V SM SM075 SM050 SSI nanosm110 nanosm0 nanosm075 Smart card reader microsm010 microsm035 microsm005 Telecom - modem igital line O minism014 minism014 minism014 OV TVxxx(N)S-L* TVxxx(N)S-L* TVxxx(N)S-L* Telecom - PX Subscriber O minism014 minism014 minism014 Temperature sensor PU nanosm050/13.2 nanosm075 nanosm050/13.2 US Individual Port nanosm075 nanosm110 nanosm050/ port ganged nanosm0 minism0 minism125 3 port ganged minism200 minism200 minism200 Note : This list is not exhaustive. Tyco lectronics welcomes our customers input for additional application ideas for PolySwitch resettable devices. *Refer to the Siar product section for more information. Overcurrent Overvoltage PolySwitch Resettable evices - Key Selection riteria ast Time-to-trip Small Size Low Resistance (Temperature Protection) 132 RoS ompliant, LV ompliant

3 Table S1 Product Series: Size, urrent Rating, Voltage Rating/Maximum Resistance for Surface-mount evices picosm nanosm microsm minism midsm SM SM2 minism decasm Size mm (mils) 2012 (0805) 3216 (1206) 3225 (1210) 4532 (1812) 5050 (2018) 7555 (2920) 8763 (3425) 150 (4420) 5050 (2018) old urrent () V /50Ω V /Ω V /6.50Ω V /6.00Ω V /5.00Ω V /3.10Ω - 30V /3.30Ω V /2.30Ω 60V /4.80Ω V /1.40Ω 16V /1.35Ω 6V /1.30Ω V /0.75Ω 13.2V /0.90Ω 24V /1.00Ω - 60V /1.40Ω V /1.10Ω V /0.30Ω 6V /0.40Ω 13.2V /0.45Ω - 30V /1.00Ω V /0.29Ω - 60V /1.00Ω V /0.40Ω 30V /0.48Ω V /0.41Ω V /0.20Ω 6V /0.21Ω 8V /0.21Ω V /0.18Ω V /0.18Ω V /0.34Ω V /0.14Ω - V /0.25Ω V /0.14Ω V /0.11Ω 6V /0.11Ω 6V /0.11Ω V /0.18Ω - V /0.25Ω V /0.11Ω V /0.23Ω V /0.11Ω V /0.12Ω V /0.10Ω V /0.Ω V /0.08Ω V /0.165Ω V /0.08Ω V /0.07Ω* 6V /0.06Ω 8V /0.07Ω 6V /0.10Ω - V /0.125Ω V /0.85Ω V /0.043Ω - 6V /0.075Ω V /0.047Ω V /0.050Ω V /0.050Ω V /0.048Ω PolySwitch Resettable evices Surface-mount evices Table S2 Thermal erating for Surface-mount evices [old urrent () at mbient Temperature ( )] Maximum mbienttemperature Part Number picosm Series Size 2012 mm/0805 mils picosm nanosm Series Size 3216 mm/1206 mils nanosm nanosm nanosm nanosm nanosm050/ nanosm nanosm nanosm coming soon nanosm200* * ata is preliminary RoS ompliant, LV ompliant 133

4 Table S2 Thermal erating for Surface-mount evices [old urrent () at mbient Temperature ( )]... ont d Maximum mbienttemperature Part Number microsm Series Size 3225 mm/1210 mils microsm microsm microsm microsm microsm microsm microsm microsm microsm minism Series Size 4532 mm/1812 mils minism minism minism minism minism075/ minism minism minism110/ minism110/ minism minism125/ minism minism0/ NW minism0/ minism0/ minism minism NW minism200s minism minism260/ minism260/ minism260/ minism Series Size 150 mm/4420 mils minism midsm Series Size 5050 mm/2018 mils SM decasm050/ SM SM SM SM Series Size 7555 mm/2920 mils SM SM SM SM075/ SM SM/ SM SM SM SM SM2 Series Size 8763 mm/3425 mils SM SM0/ SM SM SM SM RoS ompliant, LV ompliant

5 coming soon igure S1 = picosm / nanosm / microsm / minism / decasm and SM = minism190 Table S3 Part Number picosm Series Size 2012 mm/0805 mils lectrical haracteristics for Surface-mount evices at Room Temperature picosm S6 nanosm Series Size 3216 mm/1206 mils nanosm S2 nanosm S2 nanosm S2 nanosm S2 nanosm050/ S2 nanosm S2 nanosm S2 nanosm S2 nanosm200* T S2 microsm Series Size 3225 mm/1210 mils microsm S3 microsm S2 microsm S2 microsm S2 microsm S2 microsm S2 microsm S2 microsm S2 microsm S2 minism Series Size 4532 mm/1812 mils minism S2 minism S2 minism S2 minism S2 minism075/ S2 minism S2 minism S2 minism110/ S2 minism110/ S2 minism S2 minism125/ S2 minism S2 minism0/ S2 NW minism0/ S2 minism0/ S2 minism S2 * ata is preliminary Thermal erating urve for Surface-mount evices = SM120 and SM160 I () I T () igure S1 V MX (V ) % of rated hold and trip current I MX () P MX (W) mbient Temperature ( ) Max.Time-to-Trip () (S) R MIN (Ω) R 1MX (Ω) igure for imensions PolySwitch Resettable evices Surface-mount evices RoS ompliant, LV ompliant 135

6 Table S3 lectrical haracteristics for Surface-mount evices at Room Temperature... ont d Part Number minism Series Size 4532 mm/1812 mils minism S2 NW minism200s S2 minism S2 minism260/ S2 minism260/ S2 minism260/ S2 minism Series Size 150 mm/4420 mils minism S2 midsm Series Size 5050 mm/2018 mils SM S4 decasm050/ S2 SM S4 SM S4 SM S4 SM Series Size 7555 mm/2920 mils SM S5 SM S5 SM S5 SM075/ S5 SM S5 SM/ S5 SM S5 SM S5 SM S5 SM S5 SM2 evices Size 8763 mm/3425 mils I () I T () V MX (V ) I MX () P MX (W) Max.Time-to-Trip () (S) SM S5 SM0/ S5 SM S5 SM S5 SM S5 SM S5 R MIN (Ω) R 1MX (Ω) igure for imensions igure S2-S6 imension igures for Surface-mount evices igure S2 igure S3 igure S4 igure S5 igure S6 G 136 RoS ompliant, LV ompliant

7 coming soon Table S4 imensions for Surface-mount evices in Millimeters (Inches) Part Number picosm Series Size 2012 mm/0805 mils picosm S6 nanosm Series Size 3216 mm/1206 mils (0.071) (0.087) (0.0) (0.032) (0.046) (0.057) (0.006) (0.024) nanosm S2 (0.118) (0.134) (0.024) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.024) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.023) (0.032) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.023) (0.032) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm050/ S2 (0.118) (0.134) (0.019) (0.029) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.017) (0.027) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.011) (0.026) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm S2 (0.118) (0.134) (0.022) (0.035) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm200* S2 microsm Series Size 3225 mm/1210 mils (0.118) (0.134) (0.027) (0.049) (0.054) (0.071) (0.010) (0.030) (0.003) microsm S3 (0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.0) (0.025) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.0) (0.025) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.0) (0.025) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.011) (0.019) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.020) (0.048) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 (0.118) (0.135) (0.016) (0.030) (0.092) (0.110) (0.010) (0.030) (0.003) microsm S2 minism Series Size 4532 mm/1812 mils G (0.118) (0.135) (0.031) (0.046) (0.092) (0.110) (0.010) (0.030) (0.003) minism S2 (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.0) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.0) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) minism075/ S2 (0.172) (0.190) (0.032) (0.057) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.0) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.0) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) minism110/ S2 (0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism110/ S2 (0.172) (0.190) (0.032) (0.057) (0.121) (0.134) (0.010) (0.040) (0.008) Min. igure PolySwitch Resettable evices Surface-mount evices * ata is preliminary RoS ompliant, LV ompliant 137

8 Table S4 imensions for Surface-mount evices in Millimeters (Inches)... ont d 138 NW NW Part Number minism Series Size 4532 mm/1812 mils minism S2 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism125/ S2 (0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism0/ S2 (0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism0/ S2 (0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism0/ S2 (0.172) (0.190) (0.040) (0.077) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.020) (0.048) (0.121) (0.134) (0.010) (0.040) (0.008) minism200s S2 (0.172) (0.186) (0.014) (0.024) (0.121) (0.134) (0.010) (0.040) (0.008) minism S2 (0.172) (0.186) (0.019) (0.031) (0.121) (0.134) (0.010) (0.040) (0.008) minism260/ S2 (0.172) (0.190) (0.042) (0.060) (0.121) (0.134) (0.010) (0.040) (0.008) minism260/ S2 (0.172) (0.190) (0.042) (0.060) (0.121) (0.134) (0.010) (0.040) (0.008) minism260/ S2 RoS ompliant, LV ompliant (0.172) (0.190) (0.042) (0.060) (0.121) (0.134) (0.010) (0.040) (0.008) minism Series Size 150 mm/4420 mils minism S2 midsm Series Size 5050 mm/2018 mils G (0.439) (0.453) (0.013) (0.021) (0.190) (0.210) (0.020) (0.040) (0.0) SM S4 (0.186) (0.214) - (0.070) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) decasm050/ S2 (0.185) (0.209) (0.025) (0.035) (0.165) (0.189) (0.010) (0.040) (0.010) SM S4 (0.186) (0.214) - (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) SM S4 (0.186) (0.214) - (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) SM S4 (0.186) (0.214) - (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) SM Series Size 7555 mm/2920 mils SM S5 (0.265) (0.314) - (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) - SM S5 (0.265) (0.314) - (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) - SM S5 (0.265) (0.314) - (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) - SM075/ S5 (0.265) (0.314) - (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) - SM S5 (0.265) (0.314) - (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) - SM/ S5 (0.265) (0.314) - (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) - SM S5 (0.265) (0.314) - (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) - SM S5 (0.265) (0.314) - (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) - SM S5 (0.265) (0.314) - (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) - SM S5 (0.265) (0.314) - (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) - Min. igure

9 Table S4 igure S7-S13 picosmxxx = picosm035 imensions for Surface-mount evices in Millimeters (Inches) Typical Time-to-trip urves at 20 for Surface-mount evices igure S7 G Part Number igure SM2 evices Size 8763 mm/3425 mils SM S5 (0.3) (0.370) - (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.5) (0.026) (0.054) (0.017) - SM0/ S5 (0.3) (0.370) - (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.5) (0.026) (0.054) (0.017) - SM S5 (0.3) (0.370) - (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.5) (0.026) (0.054) (0.017) - SM S5 (0.3) (0.370) - (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.5) (0.026) (0.054) (0.017) - SM S5 (0.3) (0.370) - (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.5) (0.026) (0.054) (0.017) - SM S5 (0.3) (0.370) - (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.5) (0.026) (0.054) (0.017) - Min.... ont d PolySwitch Resettable evices Surface-mount evices 10 Time-to-trip (s) ault urrent () nanosmxxx = nanosm012 = nanosm016 = nanosm020 = nanosm035 = nanosm050/13.2 = nanosm075 G = nanosm110 = nanosm0 igure S8 Time-to-trip (s) G 0.01 G ault urrent () RoS ompliant, LV ompliant 139

10 igure S7-S13 Typical Time-to-trip urves at 20 for Surface-mount evices... ont d microsmxxx = microsm005 = microsm010 = microsm035 = microsm050 = microsm075 = microsm110 G = microsm0 = microsm175 I = microsm200 igure S9 Time-to-trip (s) G I 0.01 G I ault urrent () minismxxx and minismxxx = minism014 = minism020 = minism050 = minism075, minism075/24 = minism, minism110, minism110/16, minism110/24 = minism125, minism125/16 G= minism0, minism0/12, minism0/16, minism0/24 = minism160 I = minism200, minism200s J = minism190 K= minism260, minism260/12, minism260/13.2, minism260/16 igure S10 Time-to-trip (s) G IJK ault urrent () G K J I midsm = SM = decasm050/60 = SM-2018 = SM = SM igure S11 10 Time-to-trip (s) ault urrent () 140 RoS ompliant, LV ompliant

11 igure S7-S13 SMxxx = SM030 = SM050 = SM075, SM075/60 = SM120 = SM, SM/33 = SM125 G= SM260 = SM300 SM2xxx = SM0, SM0/33 = SM160 = SM185 = SM200 = SM250 Typical Time-to-trip urves at 20 for Surface-mount evices igure S12 Time-to-trip (s) igure S13 Time-to-trip (s) ault urrent () G G... ont d PolySwitch Resettable evices Surface-mount evices ault urrent () Table S5 Physical haracteristics and nvironmental Specifications for Surface-mount evices Operating temperature range -40 to 85, -40 to 125 for SM120 and SM160 Physical haracteristics Terminal pad material % matte tin with nickel underplate; gold with nickel underplate for picosm Soldering characteristics NSI/J-ST-002 ategory 3 for picosm, nanosm, microsm and minism series NSI/J-ST-002 ategory 1 for SM series Solder heat withstand per I-ST , Test Tb, Section 5, Method 1 lammability resistance per I Needle lame Test for 20 sec. Recommended storage conditions 40 max, 70% R.. max; devices may not meet specified ratings if storage conditions are exceeded. nvironmental Specifications Test Test Method onditions Resistance hange Storage life Raychem PS300, Section , 0 hours ±3% typical 85, 0 hours ±5% typical umidity aging Raychem PS300, Section , 85% R, hours ±1.2% typical Thermal shock MIL-ST-202, Method 107G 85, -40 (20 times) -33% typical 125, -55 (10 times) -33% typical Vibration MIL-ST-883 per MIL-ST-883 No change Solvent resistance Raychem PS300, Section reon No change Trichloroethane No change ydrocarbons No change RoS ompliant, LV ompliant 141

12 Table S6 Packaging and Marking Information for Surface-mount evices Recommended Pad Layout igures [mm(in.)] coming soon Part Number picosm Series Size 2012 mm/0805 mils picosm035 4,000 20,000 I 1.50 (0.060) 1.17(0.046) 1.00(0.040) UL, S, TÜV nanosm Series Size 3216 mm/1206 mils nanosm012 3,000,000 P 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm016 3,000,000 N 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm020 3,000, (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm035 3,000, (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm050/13.2 3,000,000 M 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm075 3,000,000 L 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm110 3,000,000 K 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm0 3,000, (0.063) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV nanosm200* T T T 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) Pending microsm Series Size 3225 mm/1210 mils microsm005 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm010 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm035 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm050 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm075 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm110 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm0 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm175 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV microsm200 3,000, (0.098) 1.00 (0.039) 2.00 (0.079) UL, S, TÜV minism Series Size 4532 mm/1812 mils minism014 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism020 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism050 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism075 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism075/24 1,500 7, V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism110 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism110/16 2,000 10, V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism110/24 1,500 7, V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism125 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism125/16 2,000 10, V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism0 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism0/12 2,000 10, V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV NW minism0/16 2,000 10, V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, S NW minism0/24 1,000 5, V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism160 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism200 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism200s 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism260 2,000 10, (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism260/12 1,500 7, V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism260/13.2 1,500 7, V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism260/16 1,500 7, V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, S, TÜV minism Series Size 150 mm/4420 mils minism190 5,000 20, (0.187) 1.45 (0.057) 9.57 (0.377) UL, S, TÜV midsm Series Size 5050 mm/2018 mils SM ,000 20, (0.18) 1.50 (0.059) 3.40 (0.134) UL, S, TÜV decasm050/60 1,000 5, V 4.32 (0.17) 1.40 (0.055) 3.61 (0.142) UL, S, TÜV SM ,000 20, (0.18) 1.50 (0.059) 3.40 (0.134) UL, S, TÜV SM ,000 20, (0.18) 1.50 (0.059) 3.40 (0.134) UL, S, TÜV SM ,000 20, (0.18) 1.50 (0.059) 3.40 (0.134) UL, S, TÜV * ata is preliminary Tape & Reel Quantity Standard Package Part Marking imension (Nom.) imension (Nom.) imension (Nom.) gency Recognition 142 RoS ompliant, LV ompliant

13 Table S6 Part Number SM Series Size 7555 mm/2920 mils igure S14 Packaging and Marking Information for Surface-mount evices SM030 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM050 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM075 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM075/60 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM/33 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM120 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM125 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM260 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM300 2,000 10, (0.12) 2.30 (0.09) 5.10 (0.201) UL, S, TÜV SM2 evices Size 8763 mm/3425 mils Tape & Reel Quantity Standard Package Part Marking Recommended Pad Layout igures [mm(in.)] imension (Nom.) imension (Nom.) SM0 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV SM0/33 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV SM160 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV SM185 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV SM200 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV SM250 1,500 7, (0.18) 2.30 (0.09) 6.10 (0.240) UL, S, TÜV Recommended Pad Layout for Surface-mount evices imension (Nom.) gency Recognition... ont d PolySwitch Resettable evices Surface-mount evices gency Recognition for Surface-mount evices UL S TÜV ile # for all surface-mount devices ile # for all surface-mount devices ertificate # R for picosm series ertificate # R for nanosm series ertificate # R for microsm and minism series ertificate # R for decasm series ertificate # R for SM series ertificate # R for SM series RoS ompliant, LV ompliant 143

14 Solder Reflow and Rework Recommendation for Surface-mount evices lassification Reflow Profiles Profile eature Sn-Pb utectic ssembly Pb-ree ssembly verage ramp up rate (Ts MX to Tp) 3 /second max. 3 /second max. Preheat Temperature min. (Ts MIN ) 0 Temperature max. (Ts MX ) Time (ts MIN to ts MX ) seconds seconds Time maintained above: Temperature (T L ) Time (t L ) seconds seconds Peak/lassification temperature (Tp) Time within 5 of actual peak temperature Time (tp) seconds seconds Ramp down rate 6 /second max. 6 /second max. Time 25 to peak temperature 6 minutes max. 8 minutes max. Note: ll temperatures refer to topside of the package, measured on the package body surface. igure S Tp Ramp up tp ritical Zone T L to Tp T L Ts MX t L Temperature Ts MIN ts Preheat Ramp down 25 Reflow Profile t 25 to Peak Time Solder Reflow Recommended reflow methods: - IR - ot air - Nitrogen Recommended maximum paste thickness: 0.25mm (0.010 inch) evices can be cleaned using standard methods and aqueous solvents. We believe the optimum conditions for forming acceptable solder fillets occur when a reasonable amount of solder paste is placed underneath each device s termination. s such, we request that customers comply with our recommended solder pad layouts. ustomer should validate that the solder paste amount and reflow recommendations meet its application. We request that customer board layouts refrain from placing raised features (e.g. vias, nomenclature, traces, etc.) underneath PolySwitch devices. It is possible that raised features could negatively impact solderability performance of our devices. Rework picosm, nanosm, microsm and minism series: standard industry practices. Please also avoid direct contact to the device. SM series: rework should be confined to removal of the installed product and replacement with a fresh device. 144 RoS ompliant, LV ompliant

15 Table S7 escription Tape and Reel Specifications for Surface-mount evices (in Millimeters) nanosm I microsm I minism and decasm050/60 I minism190 I midsm except decasm050/60 I SM I W 8.0 ± ± ± ± ± ± ± ± 0.30 P ± ± ± ± ± ± ± ± 0.10 P ± ± ± ± ± ± ± ± 0.10 P ± ± ± ± ± ± ± ± Table S ± ± 0.10 Table S ± ± ± ± Table S8 Table S ± 0.10 Table S ± ± ± ± 0. 1 max ± ± ± / ± / / / ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± min T max T 1 max SM2 I K 0 Table S8 Table S8 Table S8 Table S ± ± ± ± 0. Leader min Trailer min Table S8 picosm035 picosm I Tape and Reel Specifications for Surface-mount evices (in Millimeters) ll nanosm series except nanosm012 nanosm016 nanosm012 nanosm016 ll microsm series except microsm200 microsm200 minism014~075 minism~110/16 minism125~0/16 minism160~260 minism075/24 minism110/24 minism260/12 minism260/13.2 minism260/16 minism0/24 decasm050/60 o 1.70 ± ± ± ± ± ± ± ± ± 0.1 o 2.45 ± / ± ± ± ± ± ± ± 0.1 K o 0.86 ± ± ± ± ± ± ± ± ± 0.1 PolySwitch Resettable evices Surface-mount evices Table S9 Reel imensions for Surface-mount evices (in Millimeters) pico/nano/microsm minism minism190 midsm SM SM2 max N min W / / / / / /-.00 W 2 max igure S16 I Referenced Taped omponent imensions for Surface-mount evices P 0 mbossment T 0 P 2 over tape 1 0 W 2 1 K 0 0 T 1 enter lines of cavity P 1 RoS ompliant, LV ompliant 145

16 igure S17 I Referenced Reel imensions for Surface-mount evices W 2 (measured at hub) over tape N (hub dia.) arrier tape W 1 (measured at hub) mbossed cavity Part Numbering System for Surface-mount evices SM 0 /33 -R -2 Packaging 2 = Tape and Reel Rx = Resistance Range (Limited part number availability) lternative Voltage Rating (If applicable) Lead ree old urrent Indicator Product Series Warning : Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and flame. These devices are intended for protection against damage caused by occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions or prolonged trip events are anticipated. ontamination of the PPT material with certain silicone-based oils or some aggressive solvents can adversely impact the performance of the devices. evice performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal, and mechanical procedures for electronic components. PPT devices are not recommended for installation in applications where the device is constrained such that its PT properties are inhibited, for example in rigid potting materials or in rigid housings, which lack adequate clearance to accommodate device expansion. Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the rated voltage of the device. 146 RoS ompliant, LV ompliant