VEP-PSERIES INTERCHANGE > Stucchi VEP profile

Transcription

1 VPPSRIS INRHAN > Stucchi VP profile HNIAL AURS AN OPIONS Interchange Stucchi VP profile Sealing description Nitrile NR onnection system Screw SUHI SOLUIONS Available sizes Material /treatment Available threads from to arbon steel /r3+p SP NP SA Operating pressure Up to 600 bar Locking mechanism Screw to connect low rate Up to 0 L/Min 1 ar = 0,1 MPa NIS emperature ( ) 0 / + asy connection/disconnection with both side under residual pressure thanks to the Stucchi design. lat face is easy to clean, reducing the inclusion of contamination inside the hydraulic circuit. Specific dimensions of Stucchi VPP series are certified with Lloyd ype Approval in accordance with API 16 at specific rating pressure of 345 bar/5000 PSI. or complete technical information please contact technical Stucchi support. Minimal fluid spillage during disconnection, reducing fluid spillage to the environment. Minimal air inclusion during connection. Internal valve design creates minimal pressure drop, maintaining circuit efficiency in the system Internal pressure release valve system allows an easy connection with high internal residual pressure. he modular design allows flexibility with a wide range of configurations. High resistance to pressure impulses. Safe and simple to use. HOW O US Valving style lat face onnection under pressure onnection: oth side (see enefits). isconnection: Allowed (see enefits). efore to connect, clean the mating surface of the couplings to avoid dirt inclusion in the circuit. o connect pull forward the connection sleeve of the female coupling. Align the female and male coupling holding forward the connection sleeve and thread together turning the sleeve. Keep couplers aligned during connection process. o not push to connect couplings. he screwing of the threads should be done by hand without the use of the tools for the first part of the connection. he use of tools for the second part of connection can be necessary if there is high residual pressure in the circuit. Screw the connecting sleeve of the female until metal surface contact with the male coupling is complete. ighten the sleeve to the base of the male using the tightening torque spec. as indicated in the table below. o disconnect turn sleeve from contact position using a wrench, then unscrew making sure the couplings stay aligned through the entire process. 79 Modular construction ouble valve system to release pressure MAIN APPLIAIONS Agriculture Refrigeration Screw connection system eliminates premature wear Oil&as arth Moving lat face valves Industry Vehicles Special seal to prevent extrusion at high flow rates and during connection with residual pressure High Pressure Hydraulic quipment ooling hemical & ood Industry Modular construction

2 VPPSRIS PRORMANS Size Series/Size Max. flow suggested onnect torque isconnect torque Spillage* Inch l/min PM Nm lbf ft Nm lbf ft ml 1/4 3/8 1/ 5/8 3/4 1 11/ VP7 VP9P VP13P VPP** VP17P** VP1P** VP30P** VP45P ,36 1,19 3,85 39, 53,00,17 198,75 0,8, 1,8 3,0 5,6 8, 6,0 40,0,06 1,6 1,,1 4,13 6,04 19,16 9,48 1,9 1,4 1,4 1,8 3,6 5,8 1,5 40,0 1,40 1,03 1,03 1,,65 4,7 9,1 9,48 0,01 0,04 0,0 0,03 0,01 0,06 0,0 Size Series/Size Max. operating pressure urst pressure oupled emale oupled emale Inch MPa psi MPa psi MPa psi MPa psi MPa psi MPa psi 1/4 3/8 1/ 5/8 3/4 1 11/ VP7 VP9P VP13P VPP** VP17P** VP1P** VP30P** VP45P Size Series/Size ightening torque Max. residual pressure during connection Max. residual pressure, female to drain emale, male to drain and emale during disconnection Inch Nm lbt ft MPa psi MPa psi MPa psi MPa psi MPa psi 1/4 3/8 1/ 5/8 3/4 1 11/ VP7 VP9P VP13P VPP** VP17P** VP1P** VP30P** VP45P * Spillage is an indicative value of the fluid loss during disconnection (according to ISO norm test method). he torque will increase as internal residual pressure increases. ** Specific dimensions of Stucchi VPP series are certified with Lloyd ype Approval in accordance with API 16 at specific rating pressure of 345 bar/5000 PSI. or complete technical information please contact Stucchi echnical Support. Note: VP7 has metal to metal sealing system in the internal valve of male and in the valve of female coupling. ifferent male thread are available upon request. VP45P is available with flange port and flange head connection configuration (code 6) upon request. or complete technical information please contact Stucchi echnical Support. emperature range: Standard seals NR, PUR, POM from 0 to + ( from 4 to +1 ). Please read carefully instruction and warning for proper selection of the products. ests performed: he couplings have been tested at max. operating pressure for.000 impulses in according to ISO norm. he VP45P coupled and male have been tested for impulses.! WARNIN A defect, a wrong choice or an improper use of products, can cause injury to persons, animals and objects. onnect under pressure products are suitable to be connected under residual (static) pressure. Never connect or disconnect with dynamic pressure (e.g. pump on). o not use the female coupling disconnected with high impulse pressure. o not coupleuncouple with flow in the circuit. o not coupleuncouple when the temperature inside of the circuit is higher than (176 ). heck the maximum allowable working pressure of the port in use. It is important to limit contamination in the circuit to avoid compromising the function of the internal valves. Make sure that the medium used is compatible with seal and material as indicated for each series. In case of doubt please contact Stucchi echnical Support. he interchangeability is mentioned under the assumption that the manufacturer of the considered products has not changed any dimension. It is MANAORY to read and closely follow the instructions. Last updated version always apply at time of installation, see latest written Instructions on Stucchi website ( before selecting or using Stucchi products.

3 VPPSRIS OVRALL IMNSIONS MAL MAL SUHI SOLUIONS Port description: MAL HRA SPP (ISO 11791) OY SIZ escriptive ode Item ode POR (A) N Overall Length Length Hex Hex iameter Weight mm inch mm inch mm inch mm inch mm inch Kg Lbs VP7 1/4 SP M VP7 1/4 SP VP9P 3/8 SP M VP9P 3/8 SP VP9P 1/ SP M VP9P 1/ SP VP13P 1/ SP M VP13P 1/ SP VP13P 3/4 SP M VP13P 3/4 SP VPP 3/4 SP M VPP 3/4 SP VP17P 3/4 SP M VP17P 3/4 SP VP17P 1 SP M VP17P 1 SP VP1P 1 SP M VP1P 1 SP VP1P 11/4 SP M VP1P 11/4 SP VP45P SP M VP45P SP emale emale emale emale emale emale emale emale emale emale VP30P 11/4 SP emale 1 M VP30P 11/4 SP VP30P 11/ SP emale 1 M VP30P 11/ SP emale M58x3 1 1 M30x M58x3 p p M130x6 113,3 131,3 138,8 4,6 164,0 165,4 188,5 190,5 05, 06, 3,9 3,9 383,5 4,46 5,17 5,46 6,09 6,46 6,51 7,4 7,50 8,08 8,1,10 54,1 71,0 65,8 8,5 70,8 77,8 95,0 84,8 97,4 84,9 99,0 97,7 105,8 13,4 106,8 13, ,8 18,4,13,,59 3,,79 3,06 3,74 3,83 3,90 3,85 4,17 4,0 8,85 8,60,0 0,87 38,8 34,8 9,0 9,0 00,0 145,0 1,53 1,37,1 3,6 3,6 7,87 5,71 0, 0,3 0,34 0,3 0,6 0,60 0,59 0,58 0,76 0,67 1,16 1,13 1,1 1,0 1,78 1,54 1,69 1,44 3,88 3, 3,81 3,0 14,68 11,89 0, 0,51 0,73 0,7 0,75 0,71 1,36 1,3 1,30 1,8 1,68 1,48 0,05 0,04,46,4 3,9 3,40 3,71 3,17 8, 7, 8,40 7,05 3,36 6,0 81

4 VPPSRIS MAL MAL Port description: MAL HRA NP (ANSI.1.0.1) OY SIZ escriptive ode Item ode POR (A) N Overall Length Length Hex Hex iameter Weight mm inch mm inch mm inch mm inch mm inch Kg Lbs VP7 1/4 NP M VP7 1/4 NP VP9P 3/8 NP M VP9P 3/8 NP VP9P 1/ NP M VP9P 1/ NP VP13P 1/ NP M VP13P 1/ NP VPP 3/4 NP M VPP 3/4 NP VP17P 1 NP M VP17P 1 NP VP1P 11/4 NP M VP1P 11/4 NP VP30P 11/ NP emale 1 M VP30P 11/ NP VP45P NP M VP45P NP emale emale emale emale emale emale emale emale M30x M58x3 p M130x6 113,3 131,3 138,8 4,6 165,4 190,5 06, 3,9 383,5 4,46 5,17 5,46 6,09 6,51 7,50 8,1,10 54,1 71,0 65,8 8,5 70,8 77,8 95,0 84,9 99,0 106,8 13,4 1 4,8 18,4,13,,59 3,,79 3,06 3,74 3,90 4,0 8,85 8,60,0 0,87 38,8 34,8 9,0 00,0 145,0 1,53 1,37,1 3,6 7,87 5,71 0, 0,4 0,34 0,3 0,64 0,61 0,77 0,69 1,1 1,03 1,70 1,47 3,84 3,18 14,76 11,67 0, 0,5 0,74 0,7 0,76 0,71 1,40 1, 1,69 1,5,46,6 3,75 3,3 8,47 7,01 3,73 8

5 VPPSRIS MAL MAL SUHI SOLUIONS Port description: MAL HRA SA (ISO11961 & SA J1961) OY SIZ escriptive ode Item ode POR (A) N Overall Length Length Hex Hex iameter Weight mm inch mm inch mm inch mm inch mm inch Kg Lbs VP7 3/8 SA M VP7 3/8 SA emale /1618UN M30x VP9P 1/ SA emale /416UN M VP9P 1/ SA VP13P 3/4 SA M VP13P 3/4 SA VPP 3/4 SA M VPP 3/4 SA VP17P 3/4 SA M VP17P 3/4 SA VP17P 1 SA M VP17P 1 SA VP1P 1 SA M VP1P 1 SA emale /161UN emale /161UN emale /161UN emale /161UN emale /161UN M58x VP1P 11/4 SA emale /81UN M58x3 M VP1P 11/4 SA 7040 VP30P 11/4 SA emale /81UN M VP30P 11/4 SA VP30P 11/ SA emale /81UN M VP30P 11/ SA p p VP45P SA emale /1UN M130x6 M VP45P SA ,1,8 167,0 168,4 19,5 190,5 07, 06, 3,9 3,9 383,5 4,65 5,54 6,57 6,63 7,58 7,50 8,16 8,1,10 57,1 7,8 70,8 87,0 84,8,4 84,9 10,0 1,6 105,8 1,4 106,8 13, ,8 18,4,,87,79 3,43 3,95 4,0 4, 4,17 4,94 4,0 8,85 8,60,0 0,87 38,8 34,8 9,0 9,0 00,0 145,0 1,53 1,37,1 3,6 3,6 7,87 5,71 0, 0,3 0,58 0,59 0,59 0,68 1,14 1,1 1,01 1,68 1,46 3,8 3,16 14,60 1,18 0, 0,51 0,76 0,73 1,8 1,9 1,9,51,46,3 3,70 3, 8,41 6,96 3,19,85 83

6 VPPSRIS MAL MAL Port description: MAL HRA ORS/ORS ULKHA (SA J1453 or ISO 84343) OY SIZ escriptive ode Item ode POR (A) N Overall Length Length L Port length Hex Hex iameter Weight mm inch mm inch mm inch mm inch mm inch mm inch Kg Lbs VP9P 3/8 ORS M VP9P 3/8 ORS VP9P 3/8 ORS H M VP9P 3/8 ORS H VP13P 1/ ORS M VP13P 1/ ORS VP13P 1/ ORS H M VP13P 1/ ORS H VPP 3/4 ORS M VPP 3/4 ORS VPP 3/4 ORS H M VPP 3/4 ORS H VP17P 1 ORS M VP17P 1 ORS VP17P 1 ORS H M VP17P 1 ORS H emale emale emale emale emale emale emale emale /1616UN 11/1616UN 13/1616UN 13/1616UN 13/161UN 13/161UN 17/161UN 17/161UN VP1P 11/4 ORS emale /161UN M58x3 M VP1P 11/4 ORS VP1P 11/4 ORS H emale /161UN M58x3 M VP1P 11/4 ORS H ,8 170,0 17,0 1,9 9,9 11,3 60,5,5 5,90 7,71 6,69 8,54 7,1 9,05 8,3 10,6 8,48 10,41 73,1 93,7 96,1 116,7 81,3 106,9 104,8 130,4 88,0 111,4 11,5 135,9 108,7 1,4 1,4 149,9,3 19, 134,8 3,7,88 3,69 3,78 4,59 3,0 4,1 4,13 5,13 3,46 4,39 4,43 5,35 4,8 4,94 5, 5,90 4,34 5,09 5,31 6, ,4 1,9 0,51 1,437 0,669 1,634 0, ,689 4,1,1 0,36 0,38 0,39 0,64 0,65 0,61 0,66 0,73 0,74 0,8 0,78 1,19 1,11 1,3 1,1 1,73 1,51 1,85 1,67 0,77 0,79 0,84 0,86 1,41 1,43 1,34 1,45 1,63 1,7,6,44,90,66 3,81 3,3 4,07 3,67 Zinc Nickel version VPP Series is available upon request also in Zinc Nickel version. he Zinc Nickel plating ensures high resistance to corrosion and it is ideal for hydraulic equipment applications where an improved corrosion resistance is necessary. or specific codes, configuration or any other information, please contact Stucchi echnical Support. 84

7 VPPSRIS SPAR KI SAL OR MAL Repair kit / OR+K+XRNAL OR ody Size escription Part Number M VP M VP9P M VP13P M VPP M VP17P M VP1P M VP30P* M VP45P Oring ackup ring * OR + ORing holder ORing in Nitrile ackup in eflon PROIV APS OR VPP SRIS xternal yellow Oring Protective caps are always recommended to protect the couplings from damage, dirt inclusion, and will increase the product life. his is particularly important in mobile applications where exposure to weather and aggregate materials are common. or VPP two solutions are available: threaded aluminum cap with lanyard (standard colors: natural aluminum, other colors available upon request) threaded plastic cap with lanyard (standard color black). SUHI SOLUIONS ap for MAL coupling Plug for MAL coupling Protective ap ody Size/escription Part Number Material/olor Plug for emale ap for VP Aluminum/Natural VP Aluminum/Natural VP Aluminum/Natural VP Aluminum/Natural VP Aluminum/Natural VP Aluminum/Natural 1 VP Aluminum/Natural VP Aluminum/Natural Protective ap ody Size/escription Part Number Material/olor Plug for emale ap for VP Plastic/lack VP Plastic/lack VP Plastic/lack VP Plastic/lack 1 VP Plastic/lack or complete technical information see or contact info@stucchi.it SUHI S.p.A. June 018 All right reserved. he texts, data and illustrations indicated in this catalogue, may be changed by Stucchi S.p.A at any time without notice. (A VPP N RV.). 85