Freescale Semiconductor MMA6222AEG ±20/20g Dual-Axis Medium-g Micromachined HARMEMS Accelerometer
|
|
- Maud Smith
- 6 years ago
- Views:
Transcription
1 Freescale Semiconductor MMA6222AEG ±20/20g Dual-Axis Medium-g Micromachined HARMEMS Accelerometer MEMS Process Review For comments, questions, or more information about this report, or for any additional technical needs concerning semiconductor and electronics technology, please call Sales at Chipworks Richmond Road, Suite 500, Ottawa, ON K2H 5B7, Canada Tel: Fax:
2 MEMS Process Review Some of the information is this report may be covered by patents, mask and/or copyright protection. This report should not be taken as an inducement to infringe on these rights Chipworks Inc. This report is provided exclusively for the use of the purchasing organization. It can be freely copied and distributed within the purchasing organization, conditional upon the accompanying Chipworks accreditation remaining attached. Distribution of the entire report outside of the purchasing organization is strictly forbidden. The use of portions of the document for the support of the purchasing organization s corporate interest (e.g., licensing or marketing activities) is permitted, as defined by the fair use provisions of the copyright act. Accreditation to Chipworks must be attached to any portion of the reproduced information. MPR JMRK Revision 1.0 Published: August 14, 2009
3 MEMS Process Review Table of Contents 1 Overview 1.1 List of Figures 1.2 List of Tables 1.3 Company Profile 1.4 Introduction 1.5 Device Summary 1.6 Process Summary 2 Device Overview 2.1 Package and Die Overview 2.2 MEMS Die Features and Internal Vapor Analysis 2.3 ASIC Die and Die Features 3 Package Cross Section 3.1 Overview 3.2 MEMS Die, Cap, and ASIC Die in a Package 3.3 MEMS and ASIC Die and Package Lead Bond Pads 4 ASIC Die Process Overview 4.1 Overview 4.2 Dielectrics, Metals, and Contacts 4.3 Transistors, Poly-Poly Capacitor, STI, and DTI 5 MEMS Die and Silicon Cap Process Analysis 5.1 Overview 5.2 MEMS Substrate and Silicon Cap 5.3 Bond Pads 5.4 Poly Interconnect, SOI, and Dielectrics 5.5 Vias and Contacts 6 MEMS Architectural Analysis 6.1 Architectural Overview 6.2 SOI Proof Mass and Fixed Beams 6.3 Spring, Anchor, and Interconnects 6.4 Motion Stop and Air Bridges
4 MEMS Process Review 7 Critical Dimensions 7.1 Device Summary and Major Feature Dimensions 7.2 Package Cross Section, SEM-EDS Summary, and Critical Dimensions 7.3 MEMS Internal Vapor Analysis 7.4 MEMS Accelerometer Critical Dimensions 7.5 ASIC Critical Dimensions 8 References 9 Statement of Measurement Uncertainty and Scope Variation About Chipworks
5 Overview Overview 1.1 List of Figures 2 Device Overview Package Top Package Bottom MMA6222AEG Plan-View Package X-Ray MMA6222AEG End-View X-Ray MMA6222AEG Side-View X-Ray MMA6222AEG During Deprocessing Top Half of MEMS Accelerometer Plan View Bottom Half of MEMS Accelerometer Plan View MEMS Accelerometer Tilt View Corner of MEMS Accelerometer Plan View Corner of MEMS Accelerometer Tilt View Wires Connecting MEMS Accelerometer to ASIC Die Bond Pads of MEMS Accelerometer Plan View Wedge Bonds on MEMS Accelerometer Tilt View MEMS Die Photograph MEMS Die Analysis Sites Underside of Si Cap MEMS Die Markings A MEMS Die Markings B ASIC Die Photograph ASIC Die Markings ASIC Die Corner ASIC Ball Bond Pads ASIC Wedge Bond Pads 3 Package Cross Section Package Cross Section Overview MEMS Assembly and Package Overview Left Edge of MEMS Assembly Right Edge of MEMS Assembly MEMS Cap Plating Detail of MEMS Lid and Lead Glass ASIC Die to Package Lead Attach MEMS Die and Cap Wedge Bonds ASIC Die Wedge Bond ASIC Die Ball Bond Package Lead Stitch Bond
6 Overview ASIC Die Process Overview Die Edge Die Seal Minimum Pitch Metal Minimum Pitch Metal MOS Transistor Oxide Etch Minimum Gate Length PMOS Transistor Minimum Gate Length NMOS Transistor Poly-Poly Capacitor (Poly 2 Poly 1) NPN Bipolar Transistor and Minimum Width DTI DTI Top DTI Bottom 5 MEMS Die and Silicon Cap Process Analysis MEMS Cap and Accelerometer Die Optical MEMS Cap and Accelerometer Die SEM SCM of MEMS Cap and MEMS Die MEMS Die Edge MEMS Die Edge in Detail Left Edge of Si Cap Cavity Right Edge of Si Cap Cavity MEMS Die Wedge Bond Optical MEMS Die Wedge Bond SEM Aluminum Bond Pad in Detail General MEMS Structure Near Left Edge of MEMS Cavity Optical General MEMS Structure Near Right Edge of MEMS Cavity Optical General MEMS Structure Near Left Edge of MEMS Cavity SEM General MEMS Structure Near Right Edge of MEMS Cavity SEM General MEMS Structure Near the Center of MEMS Die Oxide Etch SCM of MEMS Structure Near Left Edge of MEMS Cavity Accelerometer SOI Beam Detail Top Accelerometer SOI Beam Detail Bottom Minimum Pitch SOI Top Minimum Pitch SOI Bottom Poly Line Edge of a Poly Line Field Oxide and Bird s Beak Minimum Pitch Poly Via Poly Contact Poly Contact Bottom Poly Contact Top SCM of Poly Contact
7 Overview MEMS Architectural Analysis Accelerometer Plan View Accelerometer Planes of Cross Section Accelerometer Architecture Overview MEMS Accelerometer Tilt View Top Left Corner of X-Direction Accelerometer Optical Plan View Bottom Left Corner of X-Direction Accelerometer Optical Plan View Corner of X-Direction Accelerometer (Type A Fixed Plate) SEM Plan View Type B Fixed Plate Near Center of Accelerometer Plan View Corner of Proof Mass in Detail Release Slot Holes Spring and Anchor Motion Stops Tilt View Motion Stops Plan View Substrate Contact Tilt View Poly Air Bridges Tilt View
8 Overview List of Tables 1 Overview Device Identification MMA6222AEG Device Summary MEMS Accelerometer Die Summary ASIC Die Summary MEMS Accelerometer Die Process Summary ASIC Die Process Summary 2 Device Overview MEMS Internal Vapor Analysis Package and MEMS Die Critical Dimensions ASIC Die Critical Dimensions 3 Package Cross Section Package Cross Section SEM-EDS Analysis Summary Package Critical Vertical Dimensions 4 ASIC Die Process Overview ASIC Die Observed Vertical Critical Dimensions ASIC Die Observed Horizontal Critical Dimensions 5 MEMS Die and Silicon Cap Process Analysis MEMS Accelerometer Vertical Critical Dimensions MEMS Accelerometer Horizontal Critical Dimensions 6 MEMS Architectural Analysis MEMS Accelerometer Critical Dimensions 7 Critical Dimensions MMA6222AEG Device Summary MEMS Accelerometer Die Summary ASIC Die Summary Package Cross Section SEM-EDS Analysis Summary Package Critical Dimensions MEMS Internal Vapor Analysis MEMS Accelerometer Vertical Critical Dimensions MEMS Accelerometer Horizontal Critical Dimensions MEMS Accelerometer Critical Dimensions ASIC Die Observed Vertical Critical Dimensions ASIC Die Observed Horizontal Critical Dimensions
STMicroelectronics LISY300AL Single-Axis Analog Yaw Rate Gyroscope
Single-Axis Analog Yaw Rate Gyroscope MEMS Process Review For comments, questions, or more information about this report, or for any additional technical needs concerning semiconductor technology, please
More informationPhilips SAA7118E Multi Standard Video Decoder Process Review
March 31, 2006 Philips SAA7118E Multi Standard Video Decoder Process Review For comments, questions, or more information about this report, or for any additional technical needs concerning semiconductor
More information9 rue Alfred Kastler - BP Nantes Cedex 3 - France Phone : +33 (0) website :
9 rue Alfred Kastler - BP 10748-44307 Nantes Cedex 3 - France Phone : +33 (0) 240 180 916 - email : info@systemplus.fr - website : www.systemplus.fr July 2011 - Version 1 Written by: Romain FRAUX DISCLAIMER
More informationElectronic Costing & Technology Experts
Electronic Costing & Technology Experts 21 rue la Nouë Bras de Fer 44200 Nantes France Phone : +33 (0) 240 180 916 email : info@systemplus.fr www.systemplus.fr November 2015 Version 1 - Written by Romain
More informationBosch IMU in iphone X IMU Sensor
Bosch IMU in iphone X IMU Sensor MEMS report by Audrey LAHRACH January 2018 21 rue la Noue Bras de Fer 44200 NANTES - FRANCE +33 2 40 18 09 16 info@systemplus.fr www.systemplus.fr IMU Bosch in iphone X
More information21 rue La Nouë Bras de Fer Nantes - France Phone : +33 (0) website :
21 rue La Nouë Bras de Fer - 44200 Nantes - France Phone : +33 (0) 240 180 916 - email : info@systemplus.fr - website : www.systemplus.fr April 2013 - Version 1 Written by: Romain FRAUX DISCLAIMER : System
More informationTHIẾT KẾ VI MẠCH TƯƠNG TỰ CHƯƠNG 2: CMOS Technology
THIẾT KẾ VI MẠCH TƯƠNG TỰ CHƯƠNG 2: CMOS Technology Hoàng Trang-bộ môn Kỹ Thuật Điện Tử hoangtrang@hcmut.edu.vn 1 TP.Hồ Chí Minh 12/2011 1. Overview - IC technology - CMOS vs BJT Hoàng Trang-bộ môn Kỹ
More informationMEMS for automotive and consumer electronics
MEMS for automotive and consumer MEMS for automotive and consumer electronics Dr. Jiri Marek Senior Vice President Engineering Sensors Robert Bosch GmbH, Automotive Electronics 1 Automotive Electronics
More informationGlass Frit Wafer Bonding Sealed Cavity Pressure in Relation to Bonding Process Parameters. Roy Knechtel, Sophia Dempwolf, Holger Klingner
10.1149/07509.0255ecst The Electrochemical Society Glass Frit Wafer Bonding Sealed Cavity Pressure in Relation to Bonding Process Parameters Roy Knechtel, Sophia Dempwolf, Holger Klingner X-FAB MEMS Foundry
More informationDesign and Technology Solutions for Development of SiGeMEMS devices. Tom Flynn Vice President, Sales Coventor
Design and Technology Solutions for Development of SiGeMEMS devices Tom Flynn Vice President, Sales Coventor Special thanks to: Stephane Donnay, Program Manager, imec Gerold Schropfer, Director, Foundary
More informationVLSI Design I; A. Milenkovic 1
Switch Model of NMOS Transistor V GS Gate CPE/EE 47, CPE 57 VLSI Design I L0: IC Manufacturing Source (of carriers) Drain (of carriers) Department of Electrical and Computer Engineering University of Alabama
More informationPlasma Cleaner. Yamato Scientific America. Contents. Innovating Science for Over 125 Years. Gas Plasma Dry Cleaner PDC200/210/510 PDC610G.
Yamato Scientific America Innovating Science for Over 125 Years Plasma Cleaner Contents Gas Plasma Dry Cleaner PDC200/210/510 PDC610G Gas Plasma Reactor 145 146 147 149 144 Gas Plasma Dry Cleaner Plasma
More information(12) United States Patent
USOO9403674B2 (12) United States Patent Cheng et al. (54) METHODS FOR PACKAGING A MCROELECTROMECHANICAL SYSTEM (MEMS) WAFER AND APPLICATION-SPECIFIC INTEGRATED CIRCUIT (ASIC) DIES USING THROUGH MOLD VIAS
More informationISO INTERNATIONAL STANDARD. Personal protective equipment for protection against falls from a height Single-point anchor devices
INTERNATIONAL STANDARD ISO 14567 First edition 1999-03-01 Personal protective equipment for protection against falls from a height Single-point anchor devices Équipements individuels de protection contre
More informationLayout Design II. Lecture Fall 2003
Layout Design II Lecture 6 18-322 Fall 2003 Roadmap Today: Layout Verification & design in the large Next week: Transistor sizing Wires Homework 1: Due Today Homework 2: Out Today, Due Sept 18 Lab 2: This
More informationCPE/EE 427, CPE 527 VLSI Design I IC Manufacturing. The MOS Transistor
CPE/EE 427, CPE 527 VLSI Design I IC Manufacturing Department of Electrical and Computer Engineering University of Alabama in Huntsville Aleksandar Milenkovic The MOS Transistor Polysilicon Aluminum 9/11/2006
More informationTEPZZ A_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION. (51) Int Cl.: G01L 9/00 ( )
(19) TEPZZ 796844A_T (11) EP 2 796 844 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: 29..2014 Bulletin 2014/44 (51) Int Cl.: G01L 9/00 (2006.01) (21) Application number: 13165416.2 (22)
More informationKinetics Fluid Systems - Process Flow Products. 18 February
18 February 2002 1 THE MODULAR SYSTEM - History 1995 -Unit Instruments, Inc. introduced Z-Z Block Modular system for Semiconductor marketplace 1997 - Increasing acceptance of modular technology in semiconductor
More informationEE 434 Lecture 6. Process Technology
EE 434 Lecture 6 Process Technology Quiz 4 If an n-channel MOS transistor is modeled with an input capacitance of 2fF and an on resistance of 5KΩ and a p-channel transistor with an input capacitance of
More informationReport on OSU Opto-Pack Prototypes
Report on OSU Opto-Pack Prototypes K.K. Gan The Ohio State University June 11, 2001 K.K. Gan ATLAS Opto-Pack Review 1 Outline Introduction Result on VCSEL opto-pack prototypes Result on PIN opto-pack prototypes
More informationOP CHECKLIST FOR 1D CONSOLIDATION LABORATORY TEST
Page 1 of 5 WORK INSTRUCTIONS FOR ENGINEERS NHB Compiled by : LSS Checked by : GSS Approved by : OP-3-31. CHECKLIST FOR 1D CONSOLIDATION LABORATORY TEST Page 2 of 5 31.0 CHECKLIST ITEMS *(refer to respective
More informationEurope MEMS Accelerometer Industry 2016 Market Research Report
Published on Market Research Reports Inc. (https://www.marketresearchreports.com) Home > Europe MEMS Accelerometer Industry 2016 Market Research Report Europe MEMS Accelerometer Industry 2016 Market Research
More informationECE520 VLSI Design. Lecture 9: Design Rules. Payman Zarkesh-Ha
ECE520 VLSI Design Lecture 9: Design Rules Payman Zarkesh-Ha Office: ECE Bldg. 230B Office hours: Wednesday 2:00-3:00PM or by appointment E-mail: pzarkesh@unm.edu Slide: 1 Review of Last Lecture Interconnect
More informationPHASE 1 WIND STUDIES REPORT
PHASE 1 WIND STUDIES REPORT ENVIRONMENTAL STUDIES AND PRELIMINARY DESIGN FOR A SUICIDE DETERRENT SYSTEM Contract 2006-B-17 24 MAY 2007 Golden Gate Bridge Highway and Transportation District Introduction
More informationJEDEC STANDARD. Temperature Cycling. JESD22-A104C (Revision of JESD22-A104-B) JEDEC SOLID STATE TECHNOLOGY ASSOCIATION MAY 2005
JEDEC STANDARD Temperature Cycling JESD22-A104C (Revision of JESD22-A104-B) MAY 2005 JEDEC SOLID STATE TECHNOLOGY ASSOCIATION NOTICE JEDEC standards and publications contain material that has been prepared,
More informationRelative Pressure Sensor for Automobile Fuel Tanks
Relative Pressure Sensor for Automobile Fuel Tanks KATO, Hirofumi ASHINO, Kimihiro SATO, Eisuke ABSTRACT In recent years, there has been increasing regulation to reduce the environmental burden of automobiles.
More informationGlobal OSAT Market with Focus on IC Packaging: Size, Trends & Forecasts ( ) August 2018
Global OSAT Market with Focus on IC Packaging: Size, Trends & Forecasts (2018-2022) August 2018 Global OSAT Market: Coverage Executive Summary and Scope Introduction/Market Overview Global Market Analysis
More informationConcurrent Design to Achieve High Performance and Low Cost: Case Study of a MEMS Automotive Pressure Sensor Design Presented by David DiPaola, Managing Director, DiPaola Consulting Moderated by Rob O'Reilly,
More informationMS52XX-C&T SMD Pressure Sensor
1, 4, and 7 bar absolute pressure range Piezoresistive silicon micromachined sensor Surface mount 6.2 x 6.4 mm LCP plastic cap for easy connection Uncompensated Optional trimmed offset Low noise, high
More informationMOSIS LAMBDA DESIGN RULES
MOSIS LAMBDA DESIGN RULES 3 sets of design rules: 1) SCMOS: valid for technologies with 2λ>1 µm 2) SCMOS_SUBM: valid for technologies with 0.25
More information(12) Patent Application Publication (10) Pub. No.: US 2006/ A1
US 20060227285A1 (19) United States (12) Patent Application Publication (10) Pub. No.: Huang (43) Pub. Date: Oct. 12, 2006 (54) DIVING MASK Publication Classification (76) Inventor: Shao-Yin Huang, Taipei
More informationSensorik für Inertiale Messtechnik
Sensorik für Inertiale Messtechnik Daniel Meisel Robert Bosch GmbH NAVIGARE 2012 1 Outline The Bosch Group Automotive MEMS Inertial Sensors Automotive Applications Technology Packaging and Roadmaps Bosch
More informationD-PAK Voiding: A Study to Determine the Origins of D-PAK Voiding
As originally published in the SMTA Proceedings D-PAK Voiding: A Study to Determine the Origins of D-PAK Voiding Kim Flanagan and Greg Wade Indium Corporation Clinton, NY Abstract Voiding in bottom termination
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 5366 First edition 2016-10-01 Anaesthetic and respiratory equipment Tracheostomy tubes and connectors Matériel d anesthésie et de réanimation respiratoire Raccords et tubes de
More informationGUARDING OF FLOOR-TO-FLOOR WOOL PRESSES
GUARDING OF FLOOR-TO-FLOOR WOOL PRESSES 1 NOTE The technical information in this book was current at the time of printing in 1984. While the guarding principles are still valid, the information does not
More informationG. H. Raisoni College of Engineering,Nagpur (An Autonomous Institute affiliated to Rashtrasant Tukadoji Maharaj Nagpur University)
G. H. Raisoni College of Engineering,Nagpur (An Autonomous Institute affiliated to Rashtrasant Tukadoji Maharaj Nagpur University) Report on GIAN Workshop on MEMS for BioMechanics and BioRobotics at VNIT,
More informationP STYLE 6 LH 5 RH 4 LRH
8 4 1.5 TYPICAL HURCULITE WEDGE-LOCK DOOR ELEVATIONS STANDARD WEDGE LOCK DOOR (HEIGHT) GUIDELINES 3/8" (10mm) TEMPERED = 8 RECOMENDED MAX HEIGHT 1/ (12mm) TEMPERED = 108" RECOMENDED MAX HEIGHT (15mm) TEMPERED
More informationMODEL ANALOG ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.2 TO 100FT OPERATING RANGE ANALOG OUTPUT
MODEL 862-000-200 ANALOG ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.2 TO 100FT OPERATING RANGE ANALOG OUTPUT DOCUMENT NO. 430-007H September 20, 2005 S/N IMAGENEX TECHNOLOGY CORP. 209-1875 BROADWAY
More informationSpecification of Monotype-XV Accepted 1993
Specification of Monotype-XV Accepted 1993 3. CONSTRUCTION AND MEASUREMENT RULES 3.1 FUSELAGE MAX MIN 3.1.1 Length overall 7465 7435 3.1.2 Distance from bow to mast step pivoting point(middle hole of the
More informationNew Highly Productive Phased Array Ultrasonic Testing Machine for Aluminium Plates for Aircraft Applications
19 th World Conference on Non-Destructive Testing 2016 New Highly Productive Phased Array Ultrasonic Testing Machine for Aluminium Plates for Aircraft Applications Christoph HENKEL 1, Markus SPERL 1, Walter
More informationTechnical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
More informationVENTILATOR OPTIONS. Please visit our web page to view all the available options and for a specification.
Seefire Natural Louvred Ventilator Seefire is a natural louvred ventilator that is available in a wide range of sizes, louvre options and control options. Seefire has been exhaustively tested and certified
More informationTEPZZ 6 7ZZ7A_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION. (51) Int Cl.: G01L 9/00 ( ) G01L 27/00 (2006.
(19) TEPZZ 6 7ZZ7A_T (11) EP 2 637 007 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: 11.09.13 Bulletin 13/37 (1) Int Cl.: G01L 9/00 (06.01) G01L 27/00 (06.01) (21) Application number: 1218617.6
More informationP STYLE 6 LH 5 RH 4 LRH
8 42" 1.11 1.8 1.5 1.2 OPP. 1.11 3 SIDELITE OPENING 3 SIDELITE OPENING TYPICAL HURCULITE WEDGE-LOCK DOOR ELEVATIONS 1.7 1.9 1.1 1.2 14 1.9 1.7 OPP. 8 3 24 7/8" DLO 1 11/1 8 11 1.7 1.7 OPP. 1.9 1.3 1.4
More informationTable of Contents FIRST 2005 FIRST Robotics Competition Manual: Section 3 The Arena rev B Page 1 of 8
Table of Contents 3 THE ARENA...2 3.1 OVERVIEW...2 3.1.1 Dimensions and Tolerances...3 3.2 PLAYING FIELD...4 3.2.1 Boundaries and Markings...4 3.2.2 Goals...5 3.2.3 Center Goal...5 3.2.4 Tetra Loading
More informationINVESTOR PRESENTATION. December 1, 2017
INVESTOR PRESENTATION December 1, 2017 Safe Harbor Statement The statements in this presentation that relate to future plans, market forecasts, events or performance are forward-looking statements. These
More informationINVESTOR PRESENTATION. December 1, 2017
INVESTOR PRESENTATION December 1, 2017 Safe Harbor Statement The statements in this presentation that relate to future plans, market forecasts, events or performance are forward-looking statements. These
More informationWHEATLEY Series 822/820 Swing Check Valve
Document Number: TC003001-12 Revision: 02 WHEATLEY Series 822/820 Swing Check Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS...3 SCOPE...4 INSTALLATION AND OPERATION
More informationManufacturing Processes for WSi 2 -GPSOI Substrates and their Influence on Cross-talk Suppression and Inductance
Manufacturing Processes for WSi 2 -GPSOI Substrates and their Influence on Cross-talk Suppression and Inductance PT Baine*, HS Gamble *, BM Armstrong *, DW McNeill *, M Bain* J Hamel #, S Stefanos +, M
More informationFiber Optic Lighted Bubbler Spillway Pot (DLP-45) Installation Manual
Fiber Optic Lighted Bubbler Spillway Pot (DLP-45) Installation Manual 27.75 23.75 25.50 20.75 Specifications: 8-13 GPM 100 strand fiber - Bubbler 75 strand fiber - Spillway Light Bar 45 ft. fiber tail
More informationMIL-STD-883H METHOD EXTERNAL VISUAL
* EXTERNAL VISUAL 1. PURPOSE. The purpose of this test method is to verify the workmanship of hermetically packaged devices. This test method shall also be utilized to inspect for damage due to handling,
More informationThe following drawings are concerned of this measure, which will be considered in the next revision of the documents as well as in LogiKal.
Based on an much easier assembly of the sealing frame insulating block on fixed glazings the sealing frame has been increased from 7 mm to 9 mm in the system FRAME + 75 WI. This measure has no impact on
More informationSUMMARY STEPS TO CERTIFY FAN PERFORMANCE UNDER AMCA INTERNATIONAL S CERTIFIED RATINGS PROGRAM
AMCA International Member Logo cannot be used in catalogs containing performance data. AMCA International Corporate Identity Logo can only be used by AMCA International, Inc. SUMMARY STEPS TO CERTIFY FAN
More information[Title of the course]
As with non-metallic raceway, Hubbell metal raceway is available in a variety of styles. There are 13 metal raceway profiles 8 painted and 5 aluminum for customers to choose from! ALL Hubbell painted metal
More informationNov. 27, H. N. BARNUM 1,982,491
Nov. 27, 1934. H. N. BARNUM 1,982,491 TOY BASKET BALL GAME Filed March 2, 1933. 2. Sheets-Sheet l Nov. 27, 1934. H. N. BARNUM 1,982,491 TOY BASKET BALL GAME Filed March 2, 1933 2. Sheets-Sheet 2 NWeNor
More informationINVESTOR PRESENTATION. March 2018
INVESTOR PRESENTATION March 2018 Safe Harbor Statement The statements in this presentation that relate to future plans, market forecasts, events or performance are forward-looking statements. These statements
More informationMODEL DIGITAL ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.5 TO 100FT (0.15 TO 30M) OPERATING RANGE SERIAL OUTPUT
MODEL 863-000-200 DIGITAL ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.5 TO 100FT (0.15 TO 30M) OPERATING RANGE SERIAL OUTPUT DOCUMENT NO. 430-017C April 14, 2005 S/N IMAGENEX TECHNOLOGY CORP. 209-1875
More informationModule 8 Coils and Threads
Inventor Self-paced ecourse Autodesk Inventor Module 8 Coils and Threads Advanced Learning Outcomes When you have completed this module, you will be able to: 1 Describe a coil and a thread. 2 Apply the
More information[MSA The Safety Company] TURBO-FLO. Blowers. Replacement Parts. Accessories. Masks. Exploded Diagrams. safetyscope. Product Portfolio for FABA
[MSA The Safety Company] TURBO-FLO Blowers Replacement Parts Accessories Masks Exploded Diagrams safetyscope Product Portfolio for FABA Turbo-Flo [Fresh Air Breathing Apparatus] Turbo-Flo The Turbo-Flo
More informationASTM E1886 and ASTM E1996 TEST REPORT. Report No.: E Rendered to: 3M COMPANY St. Paul, Minnesota 55144
ASTM E1886 and ASTM E1996 TEST REPORT Report No.: E6587.01 201 44 Rendered to: 3M COMPANY St. Paul, Minnesota 55144 PRODUCT TYPE: Safety and Security Window Film SERIES/MODEL: 3M Safety and Security Film
More informationMPG-plus. Application example. Pneumatic 2-Finger Parallel Gripper Gripper for small components. Gripping force 38 N 175 N. Sizes
MPG-plus Sizes 25 40 Weight 0.06 kg 0.24 kg Gripping force 38 N 175 N Stroke per finger 3 mm 6 mm Workpiece weight 0.19 kg 0.7 kg Application example Pneumatically driven, dual-axis pick-and-place machine
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14573 First edition 2002-05-01 Corrected version 2003-05-15 Snowboard strap bindings for soft boots Requirements and test methods Fixations de surf des neiges pour chaussures
More informationSERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
More informationISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes
INTERNATIONAL STANDARD ISO 4250-3 Third edition 2006-08-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 4250-3:2006(E)
More informationTABLE OF CONTENTS International Racquetball Federation officially approved specifications. Copyright 01/13/1983; rev.
Racquetball Court Specifications TABLE OF CONTENTS International Racquetball Federation officially approved specifications. Copyright 01/13/1983; rev. 1988; 1997, 2013 SECTION ONE: Performance and Specifications
More informationCYCLIC PERFORMANCE PER ASTM E 330 TEST REPORT. Rendered to: TRUSEAL TECHNOLOGIES, LTD. PRODUCT TYPE: Fixed Window
CYCLIC PERFORMANCE PER ASTM E 330 TEST REPORT Rendered to: TRUSEAL TECHNOLOGIES, LTD. PRODUCT TYPE: Fixed Window Report No.: Test Dates: 07/30/07 Through: 08/03/07 Report Date: 08/20/07 Expiration Date:
More informationK13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
More information5. Tailplane assembly
5. Tailplane assembly Overview This section covers the fitting of your completed tailplanes to the torque tube assembly. Included is the insertion of the TP13 bushes in the inboard rib and the fitting
More informationThe M-UPPT is an universal punch tool. Different punch inserts can be easily switched out. Pin to fix and remove inserts
The is an universal punch tool. Different punch inserts can be easily switched out. Pin to fix and remove inserts To install a punch insert, slide in the punch insert and fix this insert with the pin on
More informationTHROUGH-HOLE PACKAGING REELS, TUBES, AMMO PACKS & TAPING SPECIFICATIONS
THROUGH-HOLE PACKAGING REELS, TUBES, AMMO PACKS & TAPING SPECIFICATIONS MINIMUM PACKAGING QUANTITY Device Type MINIMUM PACKAGING QUANTITY Available Packaging Bulk 13 Ø Tape & Reel Ammo Pack Quantity per
More informationDeep Trench Metrology Challenges for 75nm DRAM Technology Peter Weidner, Alexander Kasic, Thomas Hingst Thomas Lindner, Qimonda, Dresden, Germany
Deep Trench Metrology Challenges for 75nm DRAM Technology Peter Weidner, Alexander Kasic, Thomas Hingst Thomas Lindner, Qimonda, Dresden, Germany Abstract: The demand for new DRAM technologies with smaller
More informationC.V. INTERNATIONAL PLASTICS INC.
C.V. INTERNATIONAL PLASTICS INC. Administration 532 90e Avenue Montréal, Québec, H8R 2Z7 Canada Plant 103 Baillargeon Châteauguay, Québec, J6J 4Z2 Canada Tel. : 450-698-1933 Fax : 450-698-0335 Tel. : 1-877-679-0688
More informationpdf WATER RETICULATION STANDARD VENTILATION LOUVRE BOXES SINGLE AND DOUBLE DUCT SYSTEMS
Drawing Index Name Doc.No Document Description 2001979.061H.pdf 2001979.061 WATER RETICULATION STANDARD SCOUR VALVE CHAMBER WITH CIRCULAR COVER AND FRAME SHEET NO1 OF 2 2001979.062F.pdf 2001979.062 WATER
More informationPrecision Power Transmission Roller Chains, Attachments, and Sprockets
ASME B29.1-2011 (Revision of ASME B29.1 and Partition From ASME B29.100-2002) Precision Power Transmission Roller Chains, Attachments, and Sprockets AN AMERICAN NATIONAL STANDARD ASME B29.1-2011 (Revision
More informationSlide and Turn System SF35
Profile system Framed slide and turn system Non-thermally insulated aluminum profiles with insulated glass Option of flush or weathered bottom track The flush bottom track is particularly suitable for
More informationM iniature Amplified Pressure Sensors
M iniature Amplified Pressure Sensors ±0.3 psi to 100 psi Pressure Sensors Features 0 to ±0.3 to 0 to 30 psi Pressure Ranges Ratiometric 4V Output Temperature Compensated Calibrated Zero and Span General
More informationUniversity of MN, Minnesota Nano Center Standard Operating Procedure
Equipment name: STS Etcher Badger name: STS Revision number: 3 Model: 320 Revisionist: Paul Kimani Location: Bay 3 Date: 1 October 2013 A. Description The 320 is a manually loaded batch plasma etching
More informationCrossed Roller Bearings Series Crossed Roller Bearings Series:
Crossed Roller Bearings Series Crossed Roller Bearings Series: Proprietary 2V Grinding Technology 102 Crossed Roller Bearing Series: Overview High Precision Bearing Sets Proprietary 2V Grinding Technology
More informationThe Metric Glider. By Steven A. Bachmeyer. Aerospace Technology Education Series
The Metric Glider By Steven A. Bachmeyer Aerospace Technology Education Series 10002 Photographs and Illustrations The author wishes to acknowledge the following individuals and organizations for the photographs
More informationC-Line Electrical Connectors
C-Line Electrical Connectors Product Catalog (417) 532-7121 PO Box 908 722 Durham Rd Lebanon, MO 65536 Manufactured by: PO Box 908 722 Durham Rd Lebanon, MO 65536 Company Information C-Line Electrical
More informationSemiautomatic AR-15 Pattern Lower Receiver
Semiautomatic AR-15 Pattern Lower Receiver 2017-04-12 General 1. The firearms manufacturing industry is changing the design of the lower receivers of AR-15 pattern semiautomatic rifles and pistols in a
More informationFigure 1: Hydrostatic Pressure Forces Are Perpendicular to the Surface
Pressure Hulls and Canisters 2 Cornerstone Electronics Technology and Robotics III (Notes primarily from Underwater Robotics Science Design and Fabrication, an excellent book for the design, fabrication,
More informationISO INTERNATIONAL STANDARD. Snowboard plate-bindings without a release mechanism Requirements and test methods
INTERNATIONAL STANDARD ISO 14790 Second edition 2005-02-01 Snowboard plate-bindings without a release mechanism Requirements and test methods Fixations de surf des neiges de type à plaque sans mécanisme
More informationSAES Packaging service. making innovation happen, together
SAES Packaging service MEMS Packaging service description Facility and operations Capabilities and future prospective Choose your type of service : Fast prototyping Process developments Packaging foundry
More informationDual Electronic Basketball System Owners Manual
Dual Electronic Basketball System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. WARNING! READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT.
More informationBME280 Combined humidity and pressure sensor
BME280 Combined humidity and pressure sensor BME280 Handling, soldering & mounting instructions Document revision 1.8 Document release date 29 May 2018 Document number Technical reference code(s) BST-BME280-HS-001-06
More informationModel 6812C Dual Lane Scoreboard Owner s Manual
The Leader in Event Critical Timing Electronics Model 6812C Dual Lane Scoreboard Owner s Manual Portatree Eliminator Compatible Rev A RaceAmerica, Inc. P.O. Box 3469 Santa Clara, CA 95055-3469 (408) 988-6188
More informationProduct information. Capacitive. Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69. Document ID: 29983
Product information Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69 Document ID: 29983 Contents Contents 1 Description of the measuring principle... 3 2 Type overview...
More informationIntroduction. Terms of reference. Technical Leaflet T5: The Net Gauge BoD Approval: 2014
Introduction At present, net gauges are not applicable equipment for approval by ITTF. Nevertheless net gauges have a very important role to keep the matches fair such that: (i) the result of a rally should
More informationABTQ-110 rev 00 (Last review: 28 Aug 12) INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR ABTECH S RANGE ENCLOSURES IECEx SIR U SERIAL No
ABTQ-110 rev 00 (Last review: 28 Aug 12) INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR ABTECH S RANGE ENCLOSURES IECEx SIR 05.0046U SERIAL No 20 TYPE SX Ex e II C Gb Ex tb IIIC Db IP6* IECEx SIR
More information1982 Hydrostream Viking Restoration
1982 Hydrostream Viking Restoration Part 2c: The Rebuild Daniel W. Rickey Winnipeg, Manitoba Canada daniel@cancercare.mb.ca 2000-09-22 Introduction Part one of this report showed how the shoddy manufacturing
More informationProjectile Motion INTRODUCTION. Time-of-flight vs. Initial Velocity. Projectile Motion
INTRODUCTION In this lab you will study the motion of a freely-falling projectile, namely a small plastic sphere. Projectile motion, for our purposes, is the motion of an object that has been launched
More informationISO 407 INTERNATIONAL STANDARD. Small medical gas cylinders Pin-index yoke-type valve connections
INTERNATIONAL STANDARD ISO 407 Third edition 2004-11-01 Small medical gas cylinders Pin-index yoke-type valve connections Petites bouteilles à gaz médicaux Raccords de robinets du type à étrier avec ergots
More informationPORTABLE LIGHTNING MAST PROTECTION PLP SERIES INSTRUCTION MANUAL
PORTABLE LIGHTNING MAST PROTECTION PLP SERIES INSTRUCTION MANUAL LBA Technology, Inc. Greenville, NC May 20, 2014 Rev 061515 NOTICE This Instruction Manual is prepared by LBA Technology, Inc. specifically
More informationCOMELEC C-30-S Parylene Coating System
COMELEC C-30-S Parylene Coating System Comelec C-30-S Parylene deposition system Introduction Parylene is a polymere deposited at room temperature in a vacuum chamber (few µb). Parylene coating is perfectly
More informationErrata CMOS VLSI Design 3 rd Edition
Errata CMOS VLSI esign 3 rd Edition Last updated 4 September 2006 Send your corrections to bugs@cmosvlsi.com Errata in 2 nd Printing Page viii, Section 4.3: SIzing -> Sizing (N. Ho 8/16/06) Page 39, Table
More informationVibration isolated tables. Individually tailored to your requirements.
68 Vibration isolated tables Individually tailored to your requirements. LTH laboratory table Particularly robust and resistant n Adjustable leveling mounts n Rigid, welded steel subframe n BiAir membrane
More informationSUMMARY STEPS TO CERTIFY AIRFLOW MEASUREMENT PERFORMANCE UNDER AMCA INTERNATIONAL S CERTIFIED RATINGS PROGRAM
AMCA International Member Logo cannot be used in catalogs containing performance data. AMCA International Corporate Identity Logo can only be used by AMCA International, Inc. SUMMARY STEPS TO CERTIFY AIRFLOW
More informationProduct Overview: Key Features:
APGL4 Model Tripod Product Overview: The Ravelli APGL4 is a Professional Quality Tripod providing a solid base for high-end photographic equipment. This model is all pressure treated aluminum alloy construction
More informationPEAK ALUMINUM FENCING AQUATINE Review for compliance with 2014 Florida Building Code and 2014 Florida Building Code Residential
PEAK ALUMINUM FENCING AQUATINE Review for compliance with 2014 Florida Building Code and 2014 Florida Building Code Residential Peak Products USA Corporation December 14, 2015 RJC No. VAN.106169.0012 Prepared
More information