SDGOG SDGLK. Device mount with indirect component

Size: px

Start display at page:

Download "SDGOG SDGLK. Device mount with indirect component"

Suzanna Casey
5 years ago
Views:

1 SDGOG SDGLK Device mount with indirect component

2 2 Here you are: The special frosted finish of the device mounts in the SDGO series with a new visual impact The mixture of direct and indirect lighting is often perceived to be particularly pleasing. Experience the space in all of its dimensions. The SDT continuous light run with I.L.O also combines both possibilities in the OG variants. With its seamless integration in the SDT lighting run system, you have another design option for meeting the varying requirements of a lighting layout. New Individual.Lens.Optic with special frosted finish Direct/indirect diffuse light distribution System efficiency: up to 160 lm/w Lumen packages: 4000lm, 6000lm, 8000lm and 10000lm DALI variants SDGOG in the context of indirect lighting for LED device mounts ca. 0 % ca. 2 % ca. 5 % ca. 10 % ca. 16 %

A mixture of direct and indirect lighting is desirable when harmonious illumination is also required above the continuous light run.

3 Strong but indirect too 3 SDGOG device mounts with frosted optics The introduction of the Individual.Lens.Optic to continuous LED lighting runs LED also opens up the possibility of considering the indirect light component. A mixture of direct and indirect lighting is desirable when harmonious illumination is also required above the continuous light run. There are already various device mounts available in the standard SDT light run range for lighting layouts that exploit these possibilities. The SDGOG device mounts meets the wish for greater flexibility in this field. This can also become important during the renovation of lighting systems because the characteristics of the light distribution are close to those of T5/T8 systems. But by switching to LED you still benefit from the benchmark efficiency figures. With uniform LED spacing, even across the gap between circuit boards, the result is a sophisticated picture of modern lighting technology. Renovation solutions The optimisation of an existing lighting system is an important step in reducing electricity costs. Benchmark cost savings are guaranteed thanks to the LED technology with I.L.O. Of course, our compatibility list is no substitute for an individual lighting calculation. LED replaces T5/T8 Always top results: frosted translucent and transparent lens technology SDGLK In the continuous light run aesthetic, the indirect lighting component is enhanced with internal longitudinal prisms and a special frosted finish diffuser. This puts the SDGLK device mount out in front. It is recommended for applications where the priority is achieving a uniform, homogeneous appearance. SDGLK: diffuse light distribution and the highest indirect light component 5 years w arranty* lm (gross) lm/w 1) lm (net) lm/w 1) Ef fi c i e n c y SDG T5 1/ SDG T5 1/ SDGOG % SDG T8 1/ SDGOG % SDG T5 1/ SDGOG % SDG T5 2/ SDGOG % SDG T5 2/ SDGOG % SDG T8 2/ SDGOG % SDG T5 2/ SDGOG % 1) Luminaire efficiency Please refer to the current data for LED luminaires under *For information about the manufacturer s guarantee for LED luminaires, see leadmin/regiolux/service/garantie/warranty_led_en.pdf

4 4

Mounting rails 5 si1 IP 20/40/54 Housing: Mounting rail of roll-formed, torsionally stiff sheet steel, pregalvanised Suitable for IP20, IP40 and IP54 Flat ribbon cabling installed and wired on rapid

o r i e s : To be equipped with either LED, T5 or T8 device mounts. Connection and assembly accessories as well as rail end caps and connectors to be ordered separately.

5 Mounting rails 5 si1 IP 20/40/54 Housing: Mounting rail of roll-formed, torsionally stiff sheet steel, pregalvanised Suitable for IP20, IP40 and IP54 Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory Miscellaneous: Special versions of device mounts or device mounts with light control components are needed to use the mounting rail wired with 11 poles A c c e s s o r i e s : To be equipped with either LED, T5 or T8 device mounts. Connection and assembly accessories as well as rail end caps and connectors to be ordered separately. Mounting instructions: The suspensions are designed for vertical loading For other arrangements or suspension spacing >2.5 m, approval and/or accessories are required Dimensions Type Unit LxBxH/DxH SDT1200/I x 63 x 46 SDT1200/II x 63 x 46 SDT1200/III x 63 x 46 SDT1500/I x 63 x 46 SDT1500/II x 63 x 46 SDT1500/III x 63 x L 46 max mm max mm max mm 1500/III 1500/III max. 20 kg max. 20 kg max. 20 kg Products Type Unit Wiring Colour /I /II /III Item number G Item number G Item number G SDT x2,5 qmm vw , , , x1,5 qmm vw , , ,60 wa , , ,60 5x2,5 qmm vw , , ,80 wa , , ,80 7x2,5 qmm vw , , ,20 7x2,5+4x1,5 qmm vw , , ,80

6 Accessories mounting rail SDT IP20 SDTA F SDTA M SDT -K DV SDTE SDCS SDCSE KP KK SDH SDT -ZA SDT -AP RP SDRP SDCT SDD SDT -KL vw SDT -KL wa SDT -KT vw SDT -KT wa SDT -KX vw SDT -KX wa SDTV SDTVL In

6 6 Accessories mounting rail SDT IP20 SDTA F SDTA M SDT -K DV SDTE SDCS SDCSE KP KK SDH SDT -ZA SDT -AP RP SDRP SDCT SDD SDT -KL vw SDT -KL wa SDT -KT vw SDT -KT wa SDT -KX vw SDT -KX wa SDTV SDTVL In order to configure around corners as quickly as linear configurations, form components have been developed for the mounting rail system. Using L, T- and X nodes and flexible cabling sophisticated design plans such as grid or island solutions in the form of lighting landscapes can be quickly and easily realised.

7 7 Accessories Type Colour Material Details Item number V G Electrical technology Socket/plug combined SDTA F-7 ce Polymer 7pol., 5/7x mm² for SDT ,01 SDTA M-7 ce Polymer 7pol., 5/7x mm² for SDT ,01 SDTA F-11 ce Polymer 11pol., 4x1.5mm² + 7x mm² for SDT ,01 SDTA M-11 ce Polymer 11pol., 4x1.5mm² + 7x mm² for SDT ,01 Connection cable kit SDT -KDV vw St 2xmale+female 7 pol.; 7x2.5mm², 600mm for SDT ,21 Protection Protective cover IP20 SDTE vw PC for SDT, ATS ,02 wa PC for SDT ,02 Mounting Single wire suspension SDCS ws Inox+mix l=2000mm for SDT ,07 SDCSE ws Inox+mix Canopy D=123mm, rope D=1.5mm, L=2200mm, 3x1.5mm² ,30 for SDT Chain suspension KK me St Chain l=30m, for SDT, SDT Basic, ATS, ,60 suspended luminaires KP 80 me St+PC l=800mm for suspended luminaires ,27 SDH me Inox for SDT, ATS at chain ,04 SDT -AP me St for SDT ,93 SDT -ZA me St for SDT ,20 Tubular pendant RP 50 ws St+PC d=16mm, M13, l=500mm for suspended luminaires ,25 suspension RP 80 ws St+PC d=16mm, M13, l=800mm for suspended luminaires ,33 RP 100 ws St+PC d=16mm, M13, l=1000mm for suspended luminaires ,40 SDRP me Inox+mix for SDT at tubular pendant RP ,02 Mounting clip SDCT me Inox for SDT at visible T-rail ,03 SDD me Inox for SDT at ceiling ,01 Structure Mounting rail connector SDT -K L vw St L form ,45 wa St L form ,62 SDT -K T vw St T-form ,84 wa St T-form ,84 SDT -K X vw St X-form ,63 wa St X-form ,10 SDTV me St.galv. for SDT ,22 SDTVL me St.galv. detachable for SDT ,24 For mounting distance < 2500 mm: max mm max mm max mm 1500/III 1500/III max. 20 kg max. 20 kg max. 20 kg For mounting distance > 2500 mm: max SDTV.! 4600 ± 100 SDTV.! min SDH SDT-ZA SDH ± 200 (ca. 3600) >4600 SDTV.! SDT-AP max max. 2250

8 8 Accessories mounting rail SDT IP54 SDTA F SDTA M SDTES SDCS SDCSE KK KP SDH SDT -ZA SDT -AP RP SDRP SDCT SDD SDTVLS For mounting distance > 2500 mm: max SDTV.! 4600 ± 100 SDTV.! min SDH SDT-ZA SDH ± 200 (ca. 3600) >4600 SDTV.! SDT-AP max max Accessories Type Colour Material Details Item number V G Electrical technology Socket/plug combined SDTA F-7 ce Polymer 7pol., 5/7x mm² for SDT ,01 SDTA M-7 ce Polymer 7pol., 5/7x mm² for SDT ,01 SDTA F-11 ce Polymer 11pol., 4x1.5mm² + 7x mm² for SDT ,01 SDTA M-11 ce Polymer 11pol., 4x1.5mm² + 7x mm² for SDT ,01 Protection Protective cover IP54 SDTES vw PC for SDT IP ,02 Mounting Single wire suspension SDCS ws Inox+mix l=2000mm for SDT ,07 SDCSE ws Inox+mix Canopy D=123mm, rope D=1.5mm, L=2200mm, 3x1.5mm² for SDT ,30 Chain suspension KK me St Chain l=30m, for SDT, SDT Basic, ATS, suspended luminaires ,60 KP 80 me St+PC l=800mm for suspended luminaires ,27 SDH me Inox for SDT, ATS at chain ,04 SDT -AP me St for SDT ,93 SDT -ZA me St for SDT ,20 Tubular pendant RP 50 ws St+PC d=16mm, M13, l=500mm for suspended luminaires ,25 suspension RP 80 ws St+PC d=16mm, M13, l=800mm for suspended luminaires ,33 RP 100 ws St+PC d=16mm, M13, l=1000mm for suspended luminaires ,40 SDRP me Inox+mix for SDT at tubular pendant RP ,02 Mounting clip SDCT me Inox for SDT at visible T-rail ,03 SDD me Inox for SDT at ceiling ,01 Structure Mounting rail connector SDTVLS me St.galv. detachable for SDT IP ,25

9 9

10 10 Device mounts IP20 Ts=fzi1 IP 20 Lighting technology SDGOG: Direct/indirect diffuse distribution using Individual.Lens.Optic made of frosted PMMA plastic Continuous optics Lamp: LED 50000h L80/B10 CRI 80 / 4000K Housing: Pre-galvanised sheet steel surface coated with polyester resin Installation without tools with two integrated snap-in catches Switching: 1 Control gear Electronic driver Fixed device mount plug with toolfree phase preselection and locating fi n g e r Miscellaneous: Other light colours, lighting technologies, luminous fluxes or emergency lighting on request SDGOG LED 4000 SDT SDGOG Dimensions Type Unit Versions LxBxH/DxH SDGOG 1500 LED 1531 x 55 x 37 Combination SDT+SDGOG/1500 LED η LB 100 % lm/w 152 direct/indirect 90/10 % UGR lat./long. 25,5/24,9 Products Type Unit Lamps PSys [W] Colour Ballast Item number G LED - Individual.Lens.Optic geeist direct/indirect diffuse distribution optically continuous IP 20 SDGOG 1500 LED vw ED ,90 vw DALI ,90 LED vw ED ,90 vw DALI ,90 LED vw ED ,90 vw DALI ,90 Replacement parts Type Colour Material Details Item number V G Electrical technology Contact pin SDG -Contact 1-Pol me St+mix for SDT ,01

11 Device mounts IP20 11 Ts=fzi1 IP 20 Lighting technology SDGVOG: Direct/indirect diffuse distribution using Individual.Lens.Optic made of frosted PMMA plastic Continuous optics Lamp: LED 50000h L80/B10 CRI 80 / 4000K Housing: Pre-galvanised sheet steel surface coated with polyester resin Installation without tools with two integrated snap-in catches Variably positionable on the mounting rail Switching: 1 Control gear Electronic driver Variable device mount plug with tool-free phase preselection and locating finger Miscellaneous: Other light colours, lighting technologies, luminous fluxes or emergency lighting on request SDGVOG LED 8000 Dimensions Type Unit Versions LxBxH/DxH SDGVOG 1500 LED 1531 x 55 x 37 SDT SDGVOG Combination SDT+SDGVOG/1500 LED η LB 100 % lm/w 144 direct/indirect 90/10 % UGR lat./long. 26,5/25,9 Products Type Unit Lamps PSys [W] Colour Ballast Item number G LED - Individual.Lens.Optic geeist direct/indirect diffuse distribution optically continuous positioning variable IP 20 SDGVOG 1500 LED vw ED ,00 vw DALI ,00 LED vw ED ,00 vw DALI ,00 Replacement parts Type Colour Material Details Item number V G Electrical technology Contact pin SDG -Contact 1-Pol me St+mix for SDT ,01

12 12 Device mounts IP54 Ts=fdzi1 IP 54 Lighting technology SDGSOG: Direct/indirect diffuse distribution using Individual.Lens.Optic made of frosted PMMA plastic Continuous optics Lamp: LED 50000h L80/B10 CRI 80 / 4000K Housing: Pre-galvanised sheet steel surface coated with polyester resin Installation without tools with two integrated snap-in catches With integrated seal to mounting rail and plastic seal to end faces Switching: 1 Control gear Electronic driver Fixed device mount plug with toolfree phase preselection and locating fi n g e r Miscellaneous: Other light colours, lighting technologies, luminous fluxes or emergency lighting on request SDGSOG LED 6000 Dimensions Type Unit Versions LxBxH/DxH SDGSOG 1500 LED 1531 x 55 x 37 SDT SDGSOG Combination SDT+SDGSOG/1500 LED η LB 100 % lm/w 144 direct/indirect 90/10 % UGR lat./long. 26,5/25,9 Products Type Unit Lamps PSys [W] Colour Ballast Item number G LED - Individual.Lens.Optic geeist direct/indirect diffuse distribution optically continuous IP 54 SDGSOG 1500 LED vw ED ,90 vw DALI ,90 LED vw ED ,90 vw DALI ,90 LED vw ED ,90 vw DALI ,90 Replacement parts Type Colour Material Details Item number V G Electrical technology Contact pin SDG -Contact 1-Pol me St+mix for SDT ,01

13 13

14 14 Device mounts IP20 Tsfzi1 IP 20 Lighting technology SDGLK: Direct/indirect light distribution, frosted diffuser made of PMMA plastic with inner longitudinal prisms Optically seamless light run Homogeneous appearance Lamp: LED 50000h L80/B10 CRI 80 / 4000K Housing: Pre-galvanised sheet steel surface coated with polyester resin Installation without tools with two integrated swing handle latches Switching: 1 Control gear Electronic driver Fixed device mount plug with toolfree phase preselection and locating fi n g e r Miscellaneous: Other light colours, lighting technologies, luminous fluxes or emergency lighting on request SDGLK LED 4700 Dimensions N Type Unit Versions LxBxH/DxH SDGLK 1500 LED 1531 x 63 x 54 SDT SDGLK Combination SDT+SDGLK/1500 LED η LB 100 % lm/w 153 direct/indirect 84/16 % UGR lat./long. 25,2/23,8 Products Type Unit Lamps PSys [W] Colour Ballast Item number G LED - diffuser, frosted direct/indirect distribution optically continuous IP 20 SDGLK 1500 LED vw ED ,00 vw DALI ,00 LED vw ED ,00 vw DALI ,00 vw EM pack 3h ,70 LED vw ED ,00 vw DALI ,00 Replacement parts Type Colour Material Details Item number V G Electrical technology Contact pin SDG -Contact 1-Pol me St+mix for SDT ,01

Device mounts IP20 15 Tsfzi1 IP 20 Lighting technology SDGVLK: Direct/indirect light distribution, frosted diffuser made of PMMA plastic with inner longitudinal prisms Optically seamless light run

15 Device mounts IP20 15 Tsfzi1 IP 20 Lighting technology SDGVLK: Direct/indirect light distribution, frosted diffuser made of PMMA plastic with inner longitudinal prisms Optically seamless light run Homogeneous appearance Lamp: LED 50000h L80/B10 CRI 80 / 4000K Housing: Pre-galvanised sheet steel surface coated with polyester resin Installation without tools with two integrated swing handle latches Variably positionable on the mounting rail Switching: 1 Control gear Electronic driver Variable device mount plug with tool-free phase preselection and locating finger Miscellaneous: Other light colours, lighting technologies, luminous fluxes or emergency lighting on request SDGVLK LED Dimensions Type Unit Versions LxBxH/DxH SDGVLK 1500 LED 1531 x 63 x 54 SDT SDGVLK Combination SDT+SDGVLK/1500 LED η LB 100 % lm/w 140 direct/indirect 84/16 % UGR lat./long. 26,4/25,0 Products Type Unit Lamps PSys [W] Colour Ballast Item number G LED - diffuser, frosted direct/indirect distribution optically continuous positioning variable IP 20 SDGVLK 1500 LED vw ED ,00 vw DALI ,00 Replacement parts Type Colour Material Details Item number V G Electrical technology Contact pin SDG -Contact 1-Pol me St+mix for SDT ,01

16 A /17 MA/PF Subject to changes Photo index Page Bernd Ullrich, Kleinheubach DE WIKA, Klingenberg DE Christian Tech, Fulda DE Autohaus Herold, Heiligenstadt Ofr. DE Jake Campbell, Kiel DE Autohaus am Bungsberg, Oldenburg DE Regiolux Made in Germany Regiolux GmbH Hellinger Straße 3 D Königsberg T F info@regiolux.de

CONTOUR SPECIFICATION

CONTOUR SPECIFICATION SPECIFICATION RANGE FEATURES 4000K NEUTRAL WHITE CRI >80 IP40 RATED 50,000 HOURS 5 year extended WARRANTY Ideal linear fluorescent replacement Continuous light system with connectable modules offered in