Ergonomics Steps to Injury Prevention. Janelle Haines, John Deere 2018
|
|
|
- Ashlee Shelton
- 5 years ago
- Views:
Transcription
1 Ergonomics Steps to Injury Prevention Janelle Haines, John Deere 2018 Deere & Company June/July 2013
2 DIOSH Day, John Deere 2018 Agenda John Deere Overview Ergonomics Review Ergonomic Analysis at John Deere Virtual Reality and Ergonomics Benefits to Stretching Additional Benefits from Ergonomics
3 Agriculture & Turf Division PRODUCT PLATFORMS Hay & Forage Crop Harvesting Crop Care Tractors Turf and Utility 3 DIOSH Day Janelle Haines, John Deere February 2018
4 Construction & Forestry Division CONSTRUCTION PRODUCT LINE 4 DIOSH Day Janelle Haines, John Deere February 2018
5 Construction & Forestry Division FORESTRY PRODUCT LINE 5 DIOSH Day Janelle Haines, John Deere February 2018
6 Supporting Operations Financial Services Power Systems Turf Equipment Worldwide Parts Services Intelligent Solutions Group 6 DIOSH Day Janelle Haines, John Deere February 2018
7 Global Reach 7 DIOSH Day Janelle Haines, John Deere February 2018
8 Ergonomics Overview
9 Ergonomics Ergonomics: The science and practice of designing jobs and workplaces to match the capabilities and limitations of the human body. Ergonomic Principles Work activities should permit employees to adopt several different healthy and safe postures. Muscle forces should be done by the largest appropriate muscle groups available. Work activities should be performed with joints at about mid-point of their range of motion. 9 DIOSH Day Janelle Haines, John Deere February 2018
10 Basic Ergonomic Risk Factors 10 DIOSH Day Janelle Haines, John Deere February 2018
11 Ergonomic Injury Also called Musculoskeletal Disorders (MSD) Associated with the soft tissues Muscles Ligaments Tendons Nerves Cumulative strains and sprains Not a result of a slip, trip, fall, or one-time overexertions. 11 DIOSH Day Janelle Haines, John Deere February 2018
12 Ergonomic Analysis
13 Ergonomic Analysis Step 1: Observation Data collection (tools used, forces, exposure, etc.) 13 DIOSH Day Janelle Haines, John Deere February 2018
14 Ergonomic Analysis Step 2: Data Analysis How is the employee effected by workcenter conditions? 14 DIOSH Day Janelle Haines, John Deere February 2018
15 Ergonomic Analysis Step 3: Ergonomic Recommendations What can be done to prevent injury? Simple solutions to improve body positions 15 DIOSH Day Janelle Haines, John Deere February 2018
16 Virtual Reality and Ergonomics
17 VR for Manufacturing Utilize when solutions can t be obtained with simpler analysis methods Utilize to analyze costly tooling Use to get buy-in from Safety, Facilities, Assemblers, Welders, Engineers, Management 17 DIOSH Day Janelle Haines, John Deere February 2018
18 System Components VR Software Loads and displays geometry Reads input devices and computes display Motion Tracking User input devices Display Device HTC Vive 18 DIOSH Day Janelle Haines, John Deere February 2018
19 19 DIOSH Day Janelle Haines, John Deere February 2018
20 VR for Manufacturing Assembly procedures 20 DIOSH Day Janelle Haines, John Deere February 2018
21 VR for Manufacturing Layout review 21 DIOSH Day Janelle Haines, John Deere February 2018
22 VR for Manufacturing Weld fixture review 22 DIOSH Day Janelle Haines, John Deere February 2018
23 23 DIOSH Day Janelle Haines, John Deere February 2018
24 24 DIOSH Day Janelle Haines, John Deere February 2018
25 25 DIOSH Day Janelle Haines, John Deere February 2018
26 26 DIOSH Day Janelle Haines, John Deere February 2018
27 Warm Up and Stretching
28 Why Warm Up? Physically and mentally prepares your body for work Eyes and mind on task reduces the risk of injury Jump starts the body s systems Musculoskeletal Nervous Cardiovascular Hormonal 28 DIOSH Day Janelle Haines, John Deere February 2018
29 Stretching 3 Phases Before Dynamic warmups Prepare for movement by moving During Recovery/Relief Stretching Short and frequent After Static Stretching Flexibility 29 DIOSH Day Janelle Haines, John Deere February 2018
30 30 DIOSH Day Janelle Haines, John Deere February 2018
31 31 DIOSH Day Janelle Haines, John Deere February 2018
32 32 DIOSH Day Janelle Haines, John Deere February 2018
33 33 DIOSH Day Janelle Haines, John Deere February 2018
34 Is Ergo Worth It?
35 Does it Payoff? 35 DIOSH Day Janelle Haines, John Deere February 2018
36 Additional Benefits 36 DIOSH Day Janelle Haines, John Deere February 2018
37 Questions
38
Manual Tasks Minimum Standard. October, 2014
Manual Tasks Minimum Standard Manual Tasks Minimum Standard October, 2014 Contents 1 Executive Summary... 2 2 More Information... 2 3 Using this Standard... 2 4 Managing Risk... 2 4.1 Consultation... 2
Manual Handling Procedure
Manual Handling Procedure Table of Contents 1 Purpose... 3 2 Scope... 3 3 Definitions... 3 4 Responsibilities... 3 4.1 Managers And Supervisors... 3 4.2 Workers (Employees, Contractors And Visitors)...
Naval Facilities Engineering Command. Ergonomics Risk Assessment for. Dinghy Retrieval and Storage
Naval Facilities Engineering Command Ergonomics Risk Assessment for Dinghy Retrieval and Storage Introduction This report summarizes the ergonomics risk assessment conducted on November 16 th, 2006. The
Naval Facilities Engineering Command Ergonomic Risk Assessment for Aircraft Maintenance Department
Naval Facilities Engineering Command Ergonomic Risk Assessment for Aircraft Maintenance Department Introduction This report summarizes the ergonomic risk assessment conducted at the Aircraft Maintenance
ONLINE SAFETY TRAINING PROGRAM SUMMARY
Act First Safety provides best-in-class online/e-learning opportunities for employers and workers. With a selection of 17 programs, including eight (8) programs in French. Choosing Act First Safety is
BRIT TEAM PLATEFORM Training Module List
BRIT TEAM PLATEFORM Training Module List Fleet Safety Accident Scene Management Every day, drivers are involved in motor vehicle emergencies and accidents. The goal of this training program is to instruct
Injury Prevention and Ergonomics Manual Health & Safety
Rev Document Number Author Approver / BFO Approver Signature Issue Date Page 1 OP-MAN-00041 D Christie-Down Manager Regional 28/06/2018 1 of 14 TABLE OF CONTENTS 1 Purpose and Scope...3 2 Manual Handling...
Required Courses. Total Hours 39
Public Sector Safety & Health Fundamentals Certificate Program for Construction Participants must complete a minimum of seven courses, comprised of required and elective courses, that include a minimum
OFFICE SAFETY ESSENTIALS
OFFICE SAFETY ESSENTIALS Introduction Health and Safety at work is everyone's responsibility. It is important that you have a general understanding of safety and health The employer must ensure that your
Steven Triano, PhD. Agriculture Instructor Hartnell College
Steven Triano, PhD Agriculture Instructor Hartnell College striano@hartnell.edu 831-235-0928 Topics in Safety Food Safety and FSMA Worker Safety: Tools, RSI, PPE Pesticide Safety Heat Illness Prevention
SAFETY STREAMING VIDEO CATALOG
SAFETY STREAMING VIDEO CATALOG November 2014 brickstreet.com 1.866.452.7425 TM Back Safety for Material Handlers Injuries strike more than one million workers every year, resulting in lost time, wages
Management of Manual Handling in Construction. Presented by Dave Carney (Information sourced from HSE)
Management of Manual Handling in Construction Presented by Dave Carney (Information sourced from HSE) 45,000 case of musculoskeletal disorders (MSD), of which just under a third were new conditions What
Preventing Musculoskeletal Injuries (MSIs) in Manufacturing
7-Step Process to Reduce the Risk of MSI B.C. s Occupational Health and Safety Regulation requires employers to eliminate or, if that is not practicable, minimize the risk of musculoskeletal injury to
Workplace Health. and. Safety
Workplace Health and Safety Page 1 of 36 CEIL Motive Power Pty Ltd Workplace Health and Safety Workplace Health and Safety Page 2 of 36 Table of Contents Introduction... 3 Risk Management... 3 Risk Assessment
List 4 Example Of How Manual Handling Risks Can Be Reduced
List 4 Example Of How Manual Handling Risks Can Be Reduced Risk assessment for reduced handling capacity (staff) So for example a possible risk (2) of a medium severity injury requiring 3 days away from
Office Ergonomics Standard
This standard outlines general workstation and work practices to be followed in order to reduce the risk factors for developing musculoskeletal injuries (MSIs) and visual strain from working at computer
Manual Handling October 2014
Manual Handling October 2014 How Are We Doing? LTI s 0 in last 12 months Period Location Oil & Gas Base AFR Oil & Gas Sites AFR Total AFR September 0 0 0 12 Month Rolling 0 1.59 1.45 Statistics presented
Health & Safety and Employment Law
Health & Safety and Employment Law Manual Handling Health and safety training for employees The definition of Manual Handling The transporting or supporting of a load, including the lifting, putting down,
GUIDELINE for MSD Hazard Control Measures
APPENDIX C GUIDELINE for MSD Hazard Control Measures This MSD Control Measures guideline document will help you eliminate or reduce musculoskeletal disorder hazards identified by the MSD Hazard ID Form.
Advancements in Personnel Incapacitation Methodologies for Multiple Cartridge Projectiles (MPCs)
U.S. Army Research, Development and Engineering Command Advancements in Personnel Incapacitation Methodologies for Multiple Cartridge Projectiles (MPCs) NDIA Joint Armaments: Conference, Exhibition, and
MANUAL HANDLING CODE OF PRACTICE
MANUAL HANDLING CODE OF PRACTICE 1. Introduction For some years national statistics have shown that more than a quarter of accidents reported are associated with the manual handling of loads. Sprains and
NIOSH Equation Outputs: Recommended Weight Limit (RWL): Lifting Index (LI):
The NIOSH Equation is a tool used by occupational health and safety professionals to assess the manual material handling risks associated with lifting and lowering tasks in the workplace. This equation
Accident Investigation and Hazard Analysis
Accident Investigation and Hazard Analysis June 18, 2015 Objectives: Accident Investigation Define accidents Review why accident investigations are important Review the purpose of accident investigations
Constructive Ideas. Assessing the risk of sprains and strains CI Introduction. Step 1: Identify hazards. What is musculoskeletal injury (MSI)?
Constructive Ideas Innovative ideas to reduce soft tissue injuries in the construction in dus try! Assessing the risk of sprains and strains Introduction What is musculoskeletal injury (MSI)? Musculoskeletal
ISO INTERNATIONAL STANDARD. Ergonomics Manual handling Part 1: Lifting and carrying
INTERNATIONAL STANDARD ISO 11228-1 First edition 2003-05-15 Ergonomics Manual handling Part 1: Lifting and carrying Ergonomie Manutention manuelle Partie 1: Manutention verticale et manutention horizontale
TECHNOLOGY FOR THE WELDER S WORLD. ABIMIG A T.
TECHNOLOGY FOR THE WELDER S WORLD. ABIMIG A T www.binzel-abicor.com One welding torch three advantages Flexible Light Cost-effective Welding professionals do some of the most physically demanding jobs
31. COTTON CHIPPING THE HAZARD. Picture HAZARD IDENTIFICATION. Picture
31. COTTON CHIPPING The aim of this document is to provide guidance to farm managers / owners on the hazards to health and safety associated with cotton chipping, assessment of the risks associated with
TECHNICAL INFORMATION SHEET 17. Revision 1 : 2016 MODEL RISK ASSESSMENT FOR THE MANUAL HANDLING OF GAS CYLINDERS
TECHNICAL INFORMATION SHEET 17 Revision 1 : 2016 MODEL RISK ASSESSMENT FOR THE MANUAL HANDLING OF GAS CYLINDERS Copyright 2016 by British Compressed Gases Association. First printed 2009. All rights reserved.
Chapter 13: Manual Handling
Chapter 13: Manual Handling Learning Outcomes: 1. Define the term manual handling, 2. Know the activities involve manual handling, 3. Know types of injuries caused by manual handling, 4. Know the risk
NEBOSH International General Certificate Paper-2
A worker is manually loading boxes of components onto metal shelves. Identify FOUR types of injury that the worker could suffer while carrying out this task. (4) The four types of injuries include; spinal
Control of Vibration at Work
Control of Vibration at Work 1) POLICY University of Glasgow will put in place measures to protect employees from the risks of Hand Arm Vibration Syndrome (HAVS) and Whole Body Vibration. These measures
A bit of background. Session Schedule 3:00-3:10: Introduction & session overview. Overarching research theme: CPTA
A Cognitive-Biomechanical Perspective for the Management of Common Chronic Musculoskeletal Conditions Skulpan Asavasopon, PT, PhD Loma Linda University Christopher M. Powers, PT, PhD, FAPTA University
BSO Plus ANNUAL SAFETY REFRESHER 2018
The BSO Plus Safety Refresher is an annual checkpoint designed from BSO Plus content. Completing this refresher is a requirement for the Basic Safety Recertification (BSR) course, so please ensure you
Appendix 23- A: Physical Risk Factor Ergonomic Checklist
The Physical Risk Factor Ergonomic Checklist is a tool used in work places to identify and evaluate ergonomic stressors. The checklist can be used for typical work activities, which are a regular and foreseeable
HAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
Module: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
Drivers accounted for 77% of compensable claims and had the highest median medical costs ($8,444) for fall on the same level.
couriers and Messengers 80 2006-2012 Overview 591 compensable claims Costs $19.5 million Over 114,000 days of lost time A compensable rate of 4.1 per 100 FTE or 1 in 25 employees Figure 61. Compensable
HMCL211. Session 1. Work Health And Safety. Regulations, Risk Management, Ergonomics & Manual Handling. Department of Naturopathic Medicine
HMCL211 Session 1 Work Health And Safety Regulations, Risk Management, Ergonomics & Manual Handling Department of Naturopathic Medicine endeavour.edu.au o o o o o o o o o Work Health & Safety Session 1
NIOSH/BACK BELTS--Do They Prevent Injury?
BACK BELTS Do They Prevent Injury? DHHS (NIOSH) Publication No. 94-127 October 1996 The National Institute for Occupational Safety and Health (NIOSH) is part of the Centers for Disease Control and Prevention
Bicycle Power Research and Design Factors
Bicycle Power Research and Design Factors Background Summary: Human powered machinery is a great way to supply energy to a machine where electricity is not readily available or reliable. In designing the
BSO Plus ANNUAL SAFETY REFRESHER 2015
The BSO Plus Safety Refresher is an annual checkpoint designed from the content in BSO Plus. Completing this refresher is a requirement for the Basic Safety Recertification (BSR) course, so please ensure
Recognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
BASICS OF MANUAL HANDLING SAMPLE COURSE HANDBOOK. HSM Safety Management
BASICS OF MANUAL HANDLING COURSE HANDBOOK THIS PAGE INTENTIONALLY LEFT BLANK BASICS OF MANUAL HANDLING COURSE HANDBOOK FIRST EDITION 2011 C. N. PERRY MBA PgD CMIOSH AIIRSM RMaPS NOTE: The legislation and
Incident/Illness Investigation Report
Input form (2) Company (4) Department (6) Was an employee injured in the Yes No incident? (8) Did the incident involve property Yes No damage? (1) Case # (must be unique) (3) Address (5) Date of incident
A Development of Mechanical Arm for Weight Scale Calibration
A Development of Mechanical Arm for Weight Scale Calibration Pattaraweerin Woraratsoontorn Department of Industrial Physics and Medical Instrumentation, Faculty of Applied Science, King Mongkut s University
2.18 Manual Handling Policy and Procedure Table of Contents
Table of Contents Section 1 - Policy... 3 1.1 Purpose... 3 1.2 Scope... 3 1.3 Requirements... 3 1.4 Responsibilities... 3 Section 2 - Procedure... 4 Section 3 - References... 9 3.1 Statutory Documents...
Golf Stretches and Flexibility Exercises
43 Thames Street, St Albans, Christchurch 8013 Phone: (03) 356 1353. Website: philip-bayliss.com Golf Stretches and Flexibility Exercises The game of golf may have originated in Scotland. Avid players
"HAND, WRIST AND FINGER SAFETY IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "HAND, WRIST AND FINGER SAFETY IN CONSTRUCTION ENVIRONMENTS" Part of the Construction Safety Kit Series Quality Safety and Health Products, for Today... and Tomorrow OUTLINE OF MAJOR
Tennis Newsletter. Tennis Rules & Regulations. Somerset at The Plantation March 2018 NEWSLETTER. Tennis Director Somerset.
Somerset at The Plantation March 2018 NEWSLETTER Tennis Newsletter Tennis Director Somerset Michael Brandon Tennis Rules & Regulations Mike is a certified member of the United States Professional Tennis
MSD Risk Assessment Checklist
MSD Risk Assessment Checklist Purpose This MSD Risk Assessment Checklist is designed to provide you with a relatively quick and easy way to more formally assess the risk associated with exposures to some
Titelbild. Höhe: 13cm Breite: 21 cm
Titelbild Höhe: 13cm Breite: 21 cm Golf swing analysis ueye USB cameras improve golf handicap Hole in One! A successful golfer needs to possess intelligence, farsightedness, and precision. And achieving
Occupational Health and Safety Act Hazards in the Workplace
Occupational Health and Safety Act Hazards in the Workplace Recognizing Hazards A hazard is anything that can hurt you or the people you supervise or work with. There is a hazard at the root of almost
SPECTRUM MEDICAL. Surgical Date: Rehab Start Date: Little League Throwing Protocol LITTLE LEAGUE INTERVAL THROWING PROGRAM
LITTLE LEAGUE INTERVAL THROWING PROGRAM The interval-throwing program is designed so that the athlete can achieve each individual level of throwing without pain or complication. The ITP should be supplemented
The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.
Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Manual Material Handling Manual material handling
WHS GUIDANCE MATERIAL WHS GUIDANCE SECTION MATERIAL 3 HAZARDOUS MANUAL TASKS DEVELOPING WORKPLACE HEALTH & SAFETY GUIDANCE
DEVELOPING WORKPLACE HEALTH & SAFETY GUIDANCE for the RECREATIONAL & LIGHT COMMERCIAL BOATING INDUSTRIES WHS GUIDANCE MATERIAL WHS GUIDANCE SECTION MATERIAL 3 HAZARDOUS MANUAL TASKS 1 Prepared between
Hazard Communication 29 CFR
Hazard Communication 29 CFR 1910.1200 Effective March 1, 2014 Subpart Z - Toxic & Hazardous Substances (1910.1000-1450) Hazard Communication - Written program 1200(e)(1) Hazard Communication - Information
Safety Management System
Safety Management System Risk Assessment for the Exec office. Next review due: Sept 2016, or when significant changes occur. See review findings at the bottom of the page. Hazard: Acoustic Shock. Anyone
Ergonomics: Assessments and Evaluations for Job Improvements. Travis Ellis, CSP, CHMM
AND/OR AND/OR AND = Force Awkward Posture Repetition Long Duration Increased Ergo Risk Ergonomics: Assessments and Evaluations for Job Improvements Travis Ellis, CSP, CHMM Course Objectives: 1. Identify
Process Name Material Handling/MSD Prevention Program
CNM WAY PROCESS CNM Process Name Material Hanling/MSD Prevention Program (04/10/2018 Revision) Overview of Material Hanling/MSD Prevention Program Purpose: To provie a safe an healthy working environment
ISS Qualifying Report. Fall Sports Steve Marshall, PhD Jill Corlette, MS ATC
ISS Qualifying Report Fall Sports 2004 09 Steve Marshall, PhD Jill Corlette, MS ATC NCAA INJURY SURVEILLANCE PROGRAM FALL SPORTS QUALIFYING REPORT 2004-2009 ACADEMIC YEARS MEN S FOOTBALL MEN S SOCCER WOMEN
Material Lift Risk and Hazard Management
Material Lift Risk and Hazard Management Models GH 3.8 Safe 136 kg Maximum 3.80 m GH5.6 Working 113 kg Lifting 5.60 m LL Load (kg) 91 kg Height (m) 1.70 m GL-4 227 kg 1.80 m GL-8 181 kg 3.06 m GL-10 159
EMPLOYER - PHYSICAL DEMANDS ANALYSIS Lab Technician
EMPLOYER - PHYSICAL DEMANDS ANALYSIS Lab Technician Job Title: Lab Technician Video Link: Work Schedule: http://youtu.be/giggsz7hm (You Tube) http://albertaforestproducts.ca/our-industry/healthsafety/physical-demands-analyses-pda
Running Stretches and Flexibility Exercises
43 Thames Street, St Albans, Christchurch 8013 Phone: (03) 356 1353. Website: philip-bayliss.com Running Stretches and Flexibility Exercises Running is a complex, highly coordinated process involving the
SPECTRUM MEDICAL. Surgical Date: Rehab Start Date: Interval Throwing Protocol
INTERVAL THROWING PROGRAM The interval-throwing program is designed so that the athlete can achieve each individual level of throwing without pain or complication. The ITP should be supplemented with a
Modeling of Hydraulic Hose Paths
Mechanical Engineering Conference Presentations, Papers, and Proceedings Mechanical Engineering 9-2002 Modeling of Hydraulic Hose Paths Kurt A. Chipperfield Iowa State University Judy M. Vance Iowa State
HEALTH AND SAFETY GUIDANCE NOTE MANUAL HANDLING
HEALTH AND SAFETY GUIDANCE NOTE MANUAL HANDLING INTRODUCTION Manual handling is interpreted as the transporting or supporting of any load (which also includes a person or an animal). It involves a variety
Ergonomic experiments on a workstation mat of Schaffer GmbH & Co.KG
Dr. Heidinger & Dr. Jaspert GbR ERGONOMY INSTITUTE MUNICH Schaffer PurForm Technik GmbH & Co. KG Porschestr.1 49356 DIEPFOLZ 01 March 2000 Ergonomic experiments on a workstation mat of Schaffer GmbH &
2018 MSUB Baseball Winter Camp December 1 st -2 nd (Saturday-Sunday) Class of Billings, MT: P.E. Building (Lower Gymnasium)
2018 MSUB Baseball Winter Camp December 1 st -2 nd (Saturday-Sunday) Class of 2019-2023 Billings, MT: P.E. Building (Lower Gymnasium) Camp Description Don t miss this opportunity to work with the MSUB
WorkWell Consulting Ergonomic Risk Identification & Assessment. Job Title: Equipment Operator III (Sweeper) Elgin Ford #2108 Date: September 17, 2003
TASK ANALYSIS WORKSHEET Company: The Corporation of Delta Department: Engineering Operations Job Title: Equipment Operator III (Sweeper) Elgin Ford #208 Date: September 7, 2003 Job Summary: The Sweeper
PHCC Educational Foundation Safety Library OSHA General Industry
PHCC Educational Foundation Safety Library OSHA General Industry http://phccweb.360training.com Course Package General Industry Library Package 31.0 hours - $99.00 Package contains following courses: Beryllium
HealthandSafetyOntario.ca. Hazard: Compressed Gases. Hazard: Compressed Air. Hazard: Noise
Preparing a Boat for Body Work or Repainting Preparing boats for body work or repainting involves many hazards to the eyes, skin, hearing, lungs, etc. Working with fiberglass has many potential inhalable
A Guide to Breast Massage Techniques that Produces Result
A Guide to Breast Massage Techniques that Produces Result Ife Oluwatuyi Naturalhealthbag.com Massaging the breast is not a recent practice, it is an easy to use technique which has been studied for centuries
Foot Protection 29 CFR
2006 Foot Protection 29 CFR 1910.136 The foot hazard assessment should be completed before conducting this training so your company s findings, new personal protective equipment (PPE) policies, and recommendations
Risk Guide: Manual Handling
Risk Guide: Manual Handling Date Description of Original Document/Amendments Prepared/Edited By 11/06/14 Initial Draft Jasmina Lozanovska 17/06/14 Released Version Jasmina Lozanovska 30/09/14 Released
Hazard and Risk Assessment Guide
Page 1 Safety legislation in Canada (Occupational Health & Safety Act, Sec. 25) entails employers to do everything that is reasonable to ensure their workers have a healthy and safe workplace. The first
Refined Performance Horsemanship
Refined Performance Horsemanship empowering riders and horses to be their individual best The PATH International Conference Horse Expo Co-Keynote Demonstration Refined Performance Horsemanship Karen Ososki
Programming Self-Recovery in the humanoid Leong Ti Xean 1 Yap Kian Tiong 2
Programming Self-Recovery in the humanoid Leong Ti Xean 1 Yap Kian Tiong 2 1. INTRODUCTION 1.1 Background In October 2000, Honda announced the ASIMO humanoid robot, capable of interpreting the postures
Hockey Injury Prevention
STAYING HEALTHY Hockey Injury Prevention Ice hockey is one of the fastest growing organized sports in the United States. USA Hockey, the nation's governing body for the sport, states that a record number
ASSESSING AND CONTROLLING MANUAL HANDLING RISK
ASSESSING AND CONTROLLING MANUAL HANDLING RISK Location of task: Description of manual handling task: Date of assessment: Persons doing assessment: Work area management rep: Work area H&S rep (or deputy):
THE IMPACT OF GURNEY DESIGN ON EMS PERSONNEL
THE IMPACT OF GURNEY DESIGN ON EMS PERSONNEL Tycho K. Fredericks, Steven E. Butt, and Ashley Hovenkamp Human Performance Institute Department of Industrial and Manufacturing Engineering College of Engineering
Whiting Corporation Whiting Overhead Cranes
Whiting Corporation Whiting Overhead Cranes Whiting Overhead Cranes HANDLING INDUSTRY S TOUGHEST JOBS IN 1884 WHEN NORTH AMERICA WAS JUST BEGINNING TO FLEX ITS MANUFACTURING AND ECONOMIC MUSCLES, J.H.
Sit-Stand Workstations. Your guide to keeping up with the latest in workstation technology
Sit-Stand Workstations Your guide to keeping up with the latest in workstation technology 1 Contents The Height Adjustable Trend Why height adjustable workstations are becoming so popular What s in a Name?
Definitions: Sets/Duration: Frequency/Amplitude: Execution Options: Passive: Static:
1 Power Plate Boxing 3 Building upon previous Power Plate Boxing programs, this cardiovascular workout combines advanced Acceleration Training and Boxing for Fitness exercise to increase muscle strength,
There is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.
OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There
It has been observed that 20-30% of children never form the arches or curves in both the feet or in just one foot.
Introduction Flat feet, also known as Pes Planus or fallen arches, are a medical condition in which the arch of the foot is prone to suboptimal development. Normally, in this condition, the bottom of the
BSO Plus ANNUAL SAFETY REFRESHER 2015
The BSO Plus Safety Refresher is an annual checkpoint designed from BSO Plus content. Completing this refresher is a requirement for the Basic Safety Recertification (BSR) course, so please ensure you
Computational Fluid Flow Analysis of Formula One Racing Car Triya Nanalal Vadgama 1 Mr. Arpit Patel 2 Dr. Dipali Thakkar 3 Mr.
IJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 02, 2015 ISSN (online): 2321-0613 Computational Fluid Flow Analysis of Formula One Racing Car Triya Nanalal Vadgama 1 Mr.
Computer Integrated Manufacturing (PLTW) TEKS/LINKS Student Objectives One Credit
Computer Integrated Manufacturing (PLTW) TEKS/LINKS Student Objectives One Credit Suggested Time Ranges First Six Weeks History of Manufacturing PFD 1.1(A) The student will describe why and how manufacturing
NEUROLOGICAL INSIGHTS FOR TEACHING GOLF TO TODAY S FITNESS CHALLENGED
NEUROLOGICAL INSIGHTS FOR TEACHING GOLF TO TODAY S FITNESS CHALLENGED John Milton, MD, PhD, FRCP(C) Director, Golf Neurology Clinic The University of Chicago Golf is fun. It is a game that all can play.
Ergonomic Analysis for XYZ Products
Ergonomic Analysis for XYZ Products A work site evaluation was conducted for Production Worker in Department #213 on 05/31/05. The purpose of this analysis was to identify risk factors for Musculoskeletal
Board /Authority Approved Course Hockey Academy 10
Board /Authority Approved Course Hockey Academy 10 North Okanagan Shuswap School District 83 Developed By: Terry Shykora Date Developed: May 2018 School Name: A L Fortune Secondary School Superintendent
How volunteer organisations can comply with the model Work Health and Safety Act LEGISLATIVE FACT SHEET SERIES
How volunteer organisations can comply with the model Work Health and Safety Act LEGISLATIVE FACT SHEET SERIES Overview This fact sheet provides information about what volunteer organisations need to do
The Benefits Of AquaPacer Conditioning For The Dressage Horse. Fair Hill Equine Therapy Center
The Benefits Of AquaPacer Conditioning For The Dressage Horse Fair Hill Equine Therapy Center In 2009, we teamed up with Bruce Jackson at the Fair Hill Equine Therapy Center (F.H.E.T.C.) in Fair Hill,
Big time solutions... that s the WAVE.
WAV 50 SERIES Big time solutions... that s the WAVE. The WAVE Work Assist Vehicle provides significant savings opportunities by increasing safety, increasing productivity and increasing flexibility. Until
Job Hazard Analysis (JHA) What is Job Hazard Analysis (JHA)?
Job Hazard Analysis (JHA) How to Analyze Health & Safety Hazards at your worksite Michael Hall, Director CA EH+S TRAINING CENTER 1 What is Job Hazard Analysis (JHA)? It is a method for systematically identifying
HAZARD IDENTIFICATION & RISK ASSESSMENT
Clearheart Construction Co., Inc. Hazard Identification & Risk Assessment HAZARD IDENTIFICATION & RISK ASSESSMENT If all employees and subcontractors followed established OSHA compliant procedures to accomplish
Edgewood College Safety Guidelines
Edgewood College Safety Guidelines Think Safety! Edgewood College s safety policies and procedures are written to protect the health and safety of our employees and the public. In order to achieve this
Chapter 13: Manual Handling
Chapter 13: Manual Handling Learning Outcomes: After successful studying this chapter, You should be able to: 1. Define the term manual handling, 2. Know the activities involved in manual handling, 3.
Promoting Safety For Life
New Brunswick Construction Safety Association Spot the Hazard Shelley Poirier Allie DeGrace Promoting Safety For Life Spot the hazard challenge How observant are you? Can you spot the hazards in the following
National Wireless Training Standard
Skills Based Training Subcommittee In Collaboration with Wireless Industry Safety Task Force and National Association of Tower Erectors (NATE) 2014 Contents Contents Definition of Job Classifications...1