Annex C Product Specifications Page 1 of 12

Transcription

1 Annex C Product Specifications Page of PRODUCT SPECIFICATIONS TENDER FOR THE SUPPLY OF PLASTIC COVER FOR SERVICEWARE FOR PERIOD *0 DECEMBER 08 TO 0 NOVEMBER 00 TENDER REFERENCE NO TR 85 (*Estimated dates. Exact dates will be confirmed at the time of the quotation award) OF ITEM Plastic Covers for Serviceware SQC686 Rectangular Plate for First Class 65mm 5mm 0mm OF SERVICEWARE SQC 6 Maximum / Overall 60mm 0mm 7mm 5 There should be a groove in the centre of the cover, of dimensions 0mmL x 06mmW x mmh. A lifting tab (semi-circle of 0mm radius) at the left bottom corner. Two notches on the length and notch on the width of the plate to prevent pieces sticking to one another. The centre of the cover is to be perforated with a mm diameter hole. The combined height of the cover and serviceware should not exceed 5mm. ST YEAR 7

2 Annex C Product Specifications Page of SQC687 Deep Dish for First Class mm 6mm OF SERVICEWARE SQC 65 Maximum / Overall 0mm 0mm Two kidney recess holder A lifting tab (semi-circle of 0mm radius) at the left side. with a 5mm diameter hole. The combined height of the cover and serviceware should not exceed 5mm. ST YEAR 60 SQC689 Full Bronze Bowl for Indian Meal for First Class 99mm mm SQC 00 96mm 0mm A lifting tab (semi-circle of 0mm radius) at the left side. Eight built-in stoppers to prevent the covers from sticking together when they are stacked. with a mm diameter hole. 0 SQC68A SQC68A Small Plate for First/Business Class Large Plate for First/Business Class 55mm 8mm mm 7mm SQC60 SQC609 SQC60 SQC60 SQC606 SQC60 5mm +/-mm 50mm +/-.5mm 6mm +/-mm 7mm +/-mm 0mm +/-mm 6mm +/-mm Two kidney recess holder with a 5mm diameter hole. There should be an inner rim to fit the edge of the round plate. Approximately mmd x mmh. Two kidney recess holder with a 5mm diameter hole. There should be an inner rim to fit the edge of the round plate. Approximately 6mmD x mmh

3 Annex C Product Specifications Page of SQC68A Small Bowl for First/Business Class 0mm mm OF SERVICEWARE SQC605 SQC60 SQC608 Maximum / Overall 07mm +/-.5mm 0mm +/-.5mm 06mm +/-mm A lifting tab (semi-circle of 5mm radius) at the left side. with a mm diameter hole. ST YEAR 7,068 SQC685A SQC686A Condiment Dish for First/Business Class Low Bowl for First Class & Medium Round Plate for Business Class (I changed the name as it is not accurate since it is not used for FCL small plate) 9mm 0mm 8mm mm SQC60 SQC60 SQC60 SQC677 SQC607 SQC605 90mm +/-.5mm 90mm +/-mm 89mm +/-mm 79mm +/-mm 75mm +/-.5mm 7mm +/-mm 5 A lifting tab (semi-circle of 5mm radius) at the left side. with a mm diameter hole. There should be inner rim to fit the edge of the condiment dish. Approximately 85mmD x mmh. Two kidney recess holder A lifting tab (semi-circle of 0mm radius) at the lower left side. with a 5mm diameter hole. There should be inner rim to fit the edge of the round plate. 69mmD x mmh

4 Annex C Product Specifications Page of SQC68A Square Plate for Business Class/First Class SQC68A Appetizer Glass Plate for Japanese Meal RCL/PCL 88mm 7mm 88mm 60mm 0mm mm OF SERVICEWARE SQC60 SQC607 SQC60 SQC608 Maximum / Overall 8mm +/- mm 85mm +/-.5 mm 8mm +/- mm 8mm 8mm 7mm There should be an inner rim to fit the edge of the square plate. Approximately 78mmLx 78mmW x mmh with a mm diameter hole. The cover must fit snugly on all plates SQC60, SQC607 & SQC60 A lifting tab (semi-circle of 0mm radius) is to be located at the right bottom corner. with a 5mm diameter hole. ST YEAR,8 6

5 Annex C Product Specifications Page 5 of SQC68A First Class Appetiser Glass Plate 55mm 0mm 5mm OF SERVICEWARE SQC60 A Maximum / Overall 5 mm 0mm 0 mm A lifting tab (semi-circle of 0mm radius) at the right bottom corner. There should be a groove in the centre of the cover to fit with a mm diameter hole. ST YEAR 9 SQC688A Large Bowl (Inner Decal) for First Class mm mm SQC675 9mm +/-mm Flat design. A lifting tab (semi-circle of 0mm radius) at the side.

6 Annex C Product Specifications Page 6 of SQC680A Large Bowl (Outer Decal) for First Class 6mm 0mm OF SERVICEWARE SQC60 Maximum / Overall 6mm +/-mm Flat design with a stepped-up inner rim (located 9mm from outer diameter and up to 7mm in height). The combined height of the cover and serviceware when fitted together should not exceed 6mm. A lifting tab (semi-circle of 0mm radius) is to be located along the circumference. ST YEAR 0 SQC68 Small Green Bowl for First Class SQSM 80 mm 5 mm SQC69 78 mm mm Eight built-in stoppers to prevent the covers from sticking together when they are stacked. The combined height of the cover and serviceware when fitted together should not exceed 57mm. A lifting tab (semi-circle of 0mm radius) is to be located along the circumference.

7 Annex C Product Specifications Page 7 of SQC68 JPML Appetizer Dish, JCL (plum flower dish) 87 mm 55 mm OF SERVICEWARE SQC68/ 69 Maximum / Overall 85 mm 5 mm. Round plastic cover.. A lifting tab (semi-circle of 5mm radius) is to be located at the right bottom corner.. Two notches (80 o apart) on the circumference to prevent pieces sticking to one another.. (Optional) The centre of the cover is to be perforated with a mm diameter hole. ST YEAR 90 TBD (optional) JCL Deep Dish (same as YCL Korean Bowl) 6mm 5mm SQC6/ SQC6 60mm Lid should sit in the deep dish comfortably and must rest flat. Lid should have a hole approximately mm in diameter on the top. 80

8 Annex C Product Specifications Page 8 of TBD (optional) JCL Deep Dish 85mm mm OF SERVICEWARE SQC68 Maximum / Overall 85 +/- mm 85mm +/- mm Round plastic cover. Two kidney recess holder. Four pieces tab, size 5mmL x 0mmH to be position at the top, bottom, left and right of the cover. with a 5mm diameter hole. ST YEAR 80

9 Annex C Product Specifications Page 9 of SQAA TBD (optional) reference only) Rectangle Bread Plate (used for desserts) for Business Class. Plastic Tray Cover 75mm mm 96mm 50mm 57mm 65mm OF CROCKERY SQC607 SQC60 SQC600 Maximum / Overall height 70mm +/-mm 9mm +/-mm 68mm +/-mm 88.5mm +/-mm 80mm 75mm A lifting tab (semi-circle of 5mm radius) is to be located at the right bottom corner. Two notches ( on each side) on the length to prevent pieces sticking to one another. There should be an inner rim to fit the edge of the rectangle plate. Dimensions 6mmLx 85mmW x mmh the cover to prevent pieces sticking to one another and to facilitate easy separation. A rectangular plastic cover. the cover to prevent pieces sticking to one another and to facilitate easy separation. The plastic cover should be stable and be able to cover and rest within the meal tray. ST YEAR (cartons),79,97 (Carton x 8 x polybags x 50pcs)

10 Annex C Product Specifications Page 0 of SPECIAL REQUIREMENT Successful supplier will be given samples of the crockery for development of the plastic covers. Supplier has to ensure that the covers fit snugly into the crockery effectively and hygienically cover the food during refrigeration and serving. In the event the plastic covers are difficult to separate, Supplier must provide SIA with the option of perforating the covers with holes CERTIFICATION Successful supplier is required to submit all necessary valid certifications from a recognized authority that the material used are 00% unrestricted food-grade and nontoxic. Copy of the approved certificate must be provided for the st delivery, and as requested by SIA subsequently. MATERIAL PET, Clear, Food-grade and Non-toxic No recycled material is to be used. The material must be able to withstand temperature as low as -5º C to +5º C THICKNESS 0.mm. It must be firm, does not bend or tear easily. IDENTIFICATION SIA Logo to be embossed on the cover 5mm height for SQC68A, 686A, 680, 68A, 68A, 686, 687, 689, 688A, 68, TBD, TBD, TBD mm height for SQC 68A, 68A, 68A, 680A, SQAA, 5mm height for SQC685A, 685, 68 PACKING. Carton used must be good quality double-walled /6/ corrugated. Hygienically packed and sealed in polythene bag quantity as indicated below SQC68A, 68A, 686A, 68A, 687, 680A, 68, SQAA In carton x 8 sealed polythene bags x 50 pieces SQC68A, 685A, 688A, 689, 68 In carton x sealed polythene bags x 00 pieces SQC68A In carton x 0 sealed polythene bags x 0 pieces SQC68A, 686 In carton x 5 sealed polythene bags x 0 pieces MARKING IN CARTON (on two sides only) TBD, TBD & TBD In cartons x 0 sealed polythene bags x 0 pieces a) SIA Logo b) SIA Part c) Packing d) Carton Dimension (in cm) e) Gross Weight (in kg) f) Country of Origin g) Purchase order (PO) no

11 Annex C Product Specifications Page of Annex B- GLOSSARY S/No. Description Explanation Two kidney recess holder Lifting tab Inner rim Notches

12 Annex C Product Specifications Page of 5 Inner width