Specifications Maximum Operating Pressure: 200 PSI (14 BAR) Materials: Rigid PVC; PVC end plugs; PVC reinforcement cuff; Stainless steel cuff bands

Transcription

1 PVC Pressure Vessels 2.5 DIAMETER, 200 PSI, U-PIN STYLE Attractive 2.5 PVC pressure vessels available for 14, 21 & 40 length membranes. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. Configuration U-Pin Style End Entry Specifications Maximum Operating Pressure: 200 PSI (14 BAR) Materials: Rigid PVC; PVC end plugs; PVC reinforcement cuff; Stainless steel cuff bands Pressure Vessels For Membranes Vessel Size Connection FNPT Dia. Length Diameter Length FEED BRINE PROD in cm in cm in cm in cm in mm in mm in mm PV2514PVCAU ¼ 6 ¼ 6 ¼ 6 PV2521PVCAU ¾ 65 ¼ 6 ¼ 6 ¼ 6 PV2540PVCAU ¼ 6 ¼ 6 ¼ 6 Note: Vessels sold complete with End Plugs, U-Pins, Feed Plug and O-Rings. Mounting Pads and straps not included. Spare Parts Qty. per Vessel PV-EP25PVC End Plug with O-Rings 2 PV-RR25U1 U-Pin 2 PV-OR O-Ring for End Plug External 2 PV-OR O-Ring for End Plug Internal 2 YF Plug for Feed End, ¼ (64 MM) 1 WARNING: PVC pressure vessels are limited to a maximum pressure of 200 psi (14 BAR) at 77ºF (25ºC). Higher pressure, higher temperature or water hammer will lead to a premature failure. It is highly recommended that when these conditions exist, a pressure switch or relief valve be installed to protect the vessel. Alternately, you may consider a stainless steel or FRP vessel. Check our Low Energy Membranes on Page 1-4. Page 2-1

2 PVC Pressure Vessels 4 DIAMETER, 200 PSI, U-PIN STYLE Attractive 4 PVC pressure vessels available for 14, 21 & 40 length membranes. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. Configuration U-Pin Style End Entry Specifications Maximum Operating Pressure: 200 PSI (14 BAR) Materials: Rigid PVC; PVC end plugs; PVC reinforcement cuff; Stainless steel cuff bands Pressure Vessels For Membranes Vessel Size Connection FNPT Dia. Length Diameter Length FEED BRINE PROD Qty in cm in cm in cm in cm in mm in mm in mm PV4014PWG ½ 13 ½ 13 ½ 13 PV4021PWG ¾ 65 ½ 13 ½ 13 ½ 13 PV4040PWG ½ 13 ½ 13 ½ 13 PV4080PWG ½ 13 ½ 13 ½ 13 Note: Vessels sold complete with End Plugs, U-Pins, Feed Plug and O-Rings. Mounting Pads and straps not included. Membrane Interconnectors are sold separately See page Spare Parts Qty per Vessel PV-EP40PD1212 End Plug with O-Rings, ½ Brine x ½ Prod 2 PV-EP40PD134 End Plug with O-Rings, ¾ Brine x ½ Prod 2 PV-EP40PD1 End Plug with O-Rings, ½ Brine x ⅜ Prod 2 PV-RR40U U-Pin 2 PV-OR O-Ring for End Plug External 2 PV-OR O-Ring for End Plug Internal 2 YF Plug for Feed End, ½ (13 MM) 1 YF Plug for Feed End, ⅜ (9.5 MM) 1 End caps not interchangeable w/ssau model p. 2-4 WARNING: PVC pressure vessels are limited to a maximum pressure of 200 psi (14 BAR) at 77ºF (25ºC). Higher pressure, higher temperature or water hammer will lead to a premature failure. It is highly recommended that when these conditions exist, a pressure switch or relief valve be installed to protect the vessel. Alternately, you may consider a stainless steel or FRP vessel.. Page 2-2

3 Stainless Steel Pressure Vessels 2 DIAMETER, 300 PSI, U-PIN STYLE Enhances system appearance and allows you to take full advantage of the membrane capability. Safer and more reliable than the PVC pressure vessels. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. Configuration U-Pin Style End Entry Specifications Maximum Operating Pressure: 300 PSI (20 BAR) Materials: 304 Stainless Steel Body, PVC End Plugs, SS U-Pins Pressure Vessels For Membranes Vessel Size Connection FNPT Dia. Length Diameter Length FEED BRINE PROD in cm in cm in cm in cm in mm in mm in mm PV2013SSU ⅛ 3 ⅛ 3 ⅛ 3 PV2026SSU ⅛ 3 ⅛ 3 ⅛ 3 Note: Vessels sold complete with End Plugs, U-Pins, Feed Plug and O-Rings. Mounting Pads and straps not included. Spare Parts Qty per Vessel PV-EP20SSU2 End Plug with O-Rings 2 PV-RR20U U-Pin 2 PV-OR O-Ring for End Plug 4 YF Feed plug, 1/8 for feed end 1 These vessels are also available in 316 SS. Contact us for more information. See our 2 Diameter Membranes in Section 1. Page 2-3

4 Stainless Steel Pressure Vessels 2.5 DIAMETER, 300 PSI, U-PIN STYLE Enhances system appearance and allows you to take full advantage of the membrane capability. Safer and more reliable than the PVC pressure vessels. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. Configuration U-Pin Style End Entry Specifications Maximum Operating Pressure: 300 PSI (20 BAR) Materials: 304 Stainless Steel body, PVC End Plugs, SS U-Pins Pressure Vessels For Membranes Vessel Size Connection FNPT Dia. Length Diameter Length FEED BRINE PROD in cm in cm in cm in cm in mm in mm in mm PV2514SSAU ¼ 6 ¼ 6 ¼ 6 PV2521SSAU ¼ 6 ¼ 6 ¼ 6 PV2525SSAU ¼ 6 ¼ 6 ¼ 6 PV2540SSAU ¼ 6 ¼ 6 ¼ 6 Spare Parts Note: Vessels sold complete with End Plugs, U-Pins, Feed Plug and O-Rings. Mounting Pads and straps not included. Qty Per Vessel PV-EP25GWD PV-EP25GWS End Plug with O-Rings, 2 Ports for Product End End Plug with O-Rings, 1 Port for Feed End PV-RR25U2 U-Pin 2 PV-OR O-Ring for End Plug External 2 PV-OR O-Ring for End Plug Internal 2 These vessels are also available in 316 SS. Contact us for more information. 1 1 End caps not interchangeable w/ PWG model p. 2-2 Also see our Seawater Pressure Vessels on Page 2-9. Page 2-4

5 Stainless Steel Pressure Vessels 4 DIAMETER, 300 PSI, U-PIN STYLE Enhances system appearance and allows you to take full advantage of the membrane capability. Safer and more reliable than the PVC pressure vessels. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. Configuration U-Pin Style End Entry Specifications Maximum Operating Pressure: 300 PSI (28 BAR) Materials: 304 Stainless Steel Body, PVC End Plugs, SS U-Pins Pressure Vessels For Membranes Vessel Size Connection FNPT Dia. Length Diameter Length FEED BRINE PROD Qty in cm in Cm in cm in cm in mm in mm in mm PV4014SSAU ½ 13 ½ 13 ½ 13 PV4021SSAU ½ 13 ½ 13 ½ 13 PV4040SSAU ½ 13 ½ 13 ½ 13 PV4040SSAU-HT* ½ 13 ½ 13 ½ 13 PV4080SSAU ½ 13 ½ 13 ½ 13 PV40120SSAU ½ 13 ½ 13 ½ 13 * HT = High Temperature Note: Vessels sold complete with End Plugs, U-Pins, Feed Plug and O-Rings. Mounting Pads and straps not included. Membrane Interconnectors are sold separately see page Spare Parts Qty Per Vessel PV-EP40PD1212 End Plug with O-Rings, ½ Brine ½ Prod 2 PV-EP40PD134 End Plug with O-Rings, ¾ Brine ½ Prod 2 PV-EP40PD1 End Plug with O-Rings, ½ Brine ⅜ Prod 2 PV-RR40U U-Pin 2 PV-OR O-Ring for End Plug External 2 PV-OR O-Ring for End Plug Internal 2 YF Plug for Feed End, ½ 1 YF Plug for Feed End, ⅜ 1 These vessels are also available in 316 SS. Contact us for more information. Also see our Fiberglass/ FRP Pressure Vessels on pages Page 2-5

6 Stainless Steel Pressure Vessels 4 DIAMETER, 300 PSI, END CLAMP STYLE End entry stainless steel pressure vessels have a smooth, sleek look. This unique design saves both time and money. Prices are competitive with other stainless steel and FRP pressure vessels. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. Configuration End-Clamp End Entry Specifications Maximum Operating Pressure: 300 PSI (28 BAR) Materials: 316 Stainless Steel body, PVC End Plugs, SS Clamps Pressure Vessels For Membranes Vessel Size Connection FNPT Dia. Length Diameter Length FEED BRINE PROD Qty in cm in cm in cm in cm in mm in mm in mm PV4040SSAW ½ 13 ½ 13 ½ 13 PV4080SSAW ¾ 19 ¾ 19 ½ 13 PV40120SSAW ¾ 19 ¾ 19 ½ 13 Note: Vessels sold complete with End Plugs, End Clamps, and O-Rings. Feed end product port plug, mounting pads and straps not included. Membrane Interconnectors are sold separately see page Spare Parts Qty. Per Vessel PV-EPW40PD1212 End Plug with O-Rings, ½ Brine x ½ Prod 2 PV-EPW40PD3412 End Plug with O-Rings, ¾ Brine x ½ Prod 2 PV-CL40W End Clamp, single, with bolts & nuts 2 YF Feed end product port plug, ½ 1 PV-OR O-Ring for End Plug External 4 PV-OR O-Ring for End Plug Internal 2 Also see our wide variety of 4 membranes in section 1. Page 2-6

7 Stainless Steel Pressure Vessels SANITARY VESSELS Designed for use in applications where sanitary tri-clamp connections are required. Configuration Victaulic Clamp Side Entry Specifications Maximum Operating Pressure: 1000 PSI (68 BAR) Materials: 316 SS Body, 316 SS End caps Pressure Vessels For Membranes Vessel Size (approx) Connection, Tri-clamp Dia. Length Diameter Length FEED BRINE PROD Qty in cm in cm in cm in cm in mm in mm in mm PV4040SS316TC PV4080SS316TC Note: Sanitary Vessels are sold without end plug assemblies. End assemblies must be purchased separately. Spare Parts Qty Per Vessel PV4080-END316TC (Must be ordered with the vessel End Plug Assembly Kit. Includes: 2 End Caps 2 Coupling 1 body above, additional spare parts 2 Seal for Coupling available below) 1 ATD with plate ADDITIONAL SPARE PARTS: PV4080-CAP316TC End Cap Kit of 2 1 PV Coupling Kit of 2 1 PV Seal for coupling clamp Gasket, VIC, 1 Nitrile Kit of 2 PV ATD 316 SS with plate 1 AD Adapter for AMI/ FILMTEC Style Membranes Kit of 2 1 Contact us for Sanitary Membranes. Page 2-7

8 Stainless Steel Pressure Vessels SANITARY DAIRY PRESSURE VESSELS 3A Sanitary vessels for standard 3.8 and 6.3 diameter Dairy Membranes. Meets USDA Standards. Configuration Tri-Clamp Side Entry (in various port configurations) Note: End components must be purchased separately. Please specify membrane manufacturer and model and we will assist in component selection. Specifications Maximum Operating Pressure: PSI (41 BAR), PSI (14 BAR) Materials: 304 Stainless Steel Body (316 SS available upon request), BUNA SEALS Pressure Vessels For Membranes Vessel Size (approx) Connection, Triclamp Dia. Length Diameter Length FEED BRINE PERMEATE Qty in cm in cm in cm in cm in mm in mm in mm PV3838SAN PV3876SAN PV38114SAN PV38152SAN PV38190SAN PV6338SAN PV6376SAN PV63114SAN PV63152SAN Note: Dairy Vessels are sold without end plugs. End Plugs must be purchased separately. When ordering, please specify membrane manufacturer and model number to ensure proper end components. Vessels are also available in 316SS upon request. Spare Parts for for Qty per Vessel 3.8 Vessels 6.3 Vessels PV-FE PV-FE SS Feed End Cap (no port) 1 PV-FE PV-FE SS Membrane Permeate Tube End Plug 1 PV-FE PV-FE Lip Seal 2 Per Membrane PV-FE PV-FE SS Downstream (Permeate) End Cap 1 (need interconnector) PV-FE PV-FE SS Interconnector Lip Seal/ or O-Ring (interconnectors come with seals) As Per # of Membranes PV-FE PV-FE Interconnector O-Ring 2 PV-FE PV-FE Clamp 2 PV-FE PV-FE Gasket 2 Contact us for Dairy Membranes. Page 2-8

9 Fiberglass Pressure Vessels FRP VESSELS & SPARE PARTS 2.5 Diameter Pressure Vessels 1000 PSI Pressure Rating End Port Dia. For Membranes Length In. Cm. In. Cm. PV2514AM PV2521AM PV2540AM Qty Spare Parts for 2.5 Vessels PV-EP25AMS1000 PV-EP25AMD1000 PV-BP25AM1000 PV-RW25AM1000 PV-WB026 PV-OR25-228N PV-OR End Plug, single feed port End Plug, dual port, perm./conc. end Bearing plate Retaining Wedges Wedge bolt O-ring, External nitrile material O-ring, Internal nitrile material 4 Diameter Pressure Vessels Pressure Rating (PSI) For Membrane Diameter Port Type (E=End, S=Side) 1 (40 L) PV4040AM_ Length, in Number of 40 Elements per Vessel 2 (80 L) PV4080AM_ 3 (120 L) PV40120AM_ E E E E S 250SP 250SP 250SP S 300SP 300SP 300SP S 600SP 600SP 600SP Spare Parts for 4 Diameter Pressure Vessels End Port Spare Parts Pressure Rating 250 PSI Per Pressure Rating 300 PSI 600 PSI 1000 PSI Part End Plug with O-Rings ¾ Feed, Single Port EP40AMS0003 EP40AMS003 EP40AMS002 EP40AMS002 End Plug with O-Rings ¾ Brine ½ Product, Dual EP40AMD004 EP40AMD004 EP40AMD001 EP40AMD001 Retaining Ring RR40AM018 RR40AM018 RR40AM Retaining Wedges RW40AM1000 Wedge Bolts WB026 O-Ring, External, Nitrile Material OR40-342N OR40-342N OR40-342N OR40-342N O-Ring, Internal, Nitrile Material OR40-210N OR40-210N OR40-210N OR40-210N Bearing Plate -- BP40AM023 BP40AM014 BP40AM027 Side Port Spare Parts Pressure Rating 250 PSI Per Pressure Rating 300 PSI 600 PSI Part End Plug with O-Rings, Feed End no port EP40AMF029SP EP40AMF031SP EP40AMF033SP End Plug with O-Rings, ½ Permeate End EP40AMP028SP EP40AMP030SP EP40AMP032SP Retaining Ring RR40AM018 RR40AM018 RR40AM012 Side Port Spacer Product End (adapter) -- SPP40AM21SP SPP40AM21SP Side Port Spacer Feed End (adapter) -- SPF40AM22SP SPF40AM22SP O-Ring, External, Nitrile Material OR40-342N OR40-342N OR40-342N O-Ring, Internal, Nitrile Material OR40-210N OR40-210N OR40-210N Bearing Plate BP4040AM014 Note: FRP Vessels sold complete with End Plugs and end closure hardware. Mounting hardware not included.. Page 2-9

10 CodeLine Fiberglass Pressure Vessels 4 8 FRP VESSELS & SPARE PARTS Codeline Series No. For Membrane Diameter Pressure Rating (PSI) Port Type (E=End, S=Side) 1 (40 L) PV4040_ Length, in Number of 40 Elements per Vessel 2 (80 L) PV4080_ 3 (120 L) PV40120_ 4 (160 L) PV40160_ 5 (200 L) PV40200_ 6 (240 L) PV40240_ 40E30N* E E30N E30N E E E60 E60 E60 E60 E60 E60 40E E E100 E100 E100 E100 E100 E100 40A S A30 A30 A30 A30 A30 A (40 L) (80 L) (120 L) (160 L) (200 L) (240 L) PV8040_ PV8080_ PV80120_ PV80160_ PV80200_ PV80240_ 7 (280 L) PV80280_ 80E E E15 E15 E15 E15 E15 E15 E15 80E E E30 E30 E30 E30 E30 E30 E30 80E E E40 E40 E40 E40 E40 E40 E40 80E E E60 E60 E60 E60 E60 E60 E60 80E E E100 E100 E100 E100 E100 E100 E100 80E E E120 E120 E120 E120 E120 E120 E120 80A S A15 A15 A15 A15 A15 A15 A15 80A S A30 A30 A30 A30 A30 A30 A30 80A S A45 A45 A45 A45 A45 A45 A45 80A S A60 A60 A60 A60 A60 A60 A60 E8S/SP S A100 A100 A100 A100 A100 A100 A100 E8H/SP S A120 A120 A120 A120 A120 A120 A120 *Codeline models and 40E30N can only use FILMTEC style membranes. Both are end entry. Please note that vessels on this page are supplied with qty (2) 1.5 In/Out Ports. Additional or larger ports are not included in the price. End Port Spare Parts Per Codeline Series No: Part Codeline Series 40E30N 40E60 40E100 80E15 80E30 80E40 80E60 80E100 80E120 Head Assembly Bearing Plate Sealing Plate Feed/Brine Port Permeate Port Permeate Port Seal OR Port Retainer (set) 45090(set) 45090(set) 45090(set) Head Seal HS80A HS80A HS80A HS80A HS80A HS80A Adapter Seal OR OR OR OR OR OR OR OR OR Port Seal OR OR OR OR OR OR Port Nut Retaining Ring End Plug Plug Seal OR OR OR Thrust Ring Side Port Spare Parts Part Codeline Series 40A30 80A15 Per Codeline Series No: 80A30 80A45 80A60 E8S/SP E8H/SP Head Assembly Bearing Plate Plate Seal OR SQ Sealing Plate Dished Metal Head Permeate Port Permeate Port Seal OR SQ OR SQ OR SQ OR SQ OR SQ OR SQ OR SQ PWT/Adapter Seal OR Securing Plate Head Seal -- OR SQ OR SQ OR SQ OR SQ OR SQ OR SQ Adapter Seal -- OR OR OR OR OR OR Port Retainer Retaining Ring Thrust Cone/Ring Port Nut Locking Ring Securing Ring Securing Screw We also carry components for discontinued Codeline Models. Please see pages Page 2-10

11 Protec Fiberglass Pressure Vessels 4 8 FRP VESSELS & SPARE PARTS Protec Series No. For Membrane Diameter Pressure Rating (PSI) Port Type (E=End, S=Side) 1 (40 L) PV4040_ Length, in Number of 40 Elements per Vessel 2 (80 L) PV4080_ 3 (120 L) PV40120_ 4 (160 L) PV40160_ 5 (200 L) PV40200_ 6 (240 L) PV40240_ EP E PRO300 PRO300 PRO EP E PRO600 PRO600 PRO600 PRO600 PRO600 PRO EP E PRO1000 PRO1000 PRO1000 PRO1000 PRO1000 PRO SP S PRO300SP PRO300SP PRO300SP PRO300SP PRO300SP PRO300SP SP S PRO450SP PRO450SP PRO450SP PRO450SP PRO450SP PRO450SP 1 (40 L) PV8040_ 2 (80 L) PV8080_ 3 (120 L) PV80120_ 4 (160 L) PV80160_ 5 (200 L) PV80200_ 6 (240 L) PV80240_ 7 (280 L) PV80280_ EP E PRO150 PRO150 PRO150 PRO150 PRO150 PRO150 PRO EP E PRO300 PRO300 PRO300 PRO300 PRO300 PRO300 PRO EP E PRO450 PRO450 PRO450 PRO450 PRO450 PRO450 PRO EP E PRO600 PRO600 PRO600 PRO600 PRO600 PRO600 PRO EP E PRO1000 PRO1000 PRO1000 PRO1000 PRO1000 PRO1000 PRO EP E PRO1200 PRO1200 PRO1200 PRO1200 PRO1200 PRO1200 PRO SP S PRO150SP PRO150SP PRO150SP PRO150SP PRO150SP PRO150SP PRO150SP SP S PRO300SP PRO300SP PRO300SP PRO300SP PRO300SP PRO300SP PRO300SP SP S PRO450SP PRO450SP PRO450SP PRO450SP PRO450SP PRO450SP PRO450SP SP S PRO600SP PRO600SP PRO600SP PRO600SP PRO600SP PRO600SP PRO600SP SP S PRO1000SP PRO1000SP PR1000SP PR1000SP PR1000SP PR1000SP PR1000SP SP S PRO1200SP PRO1200SP PR1200SP PR1200SP PR1200SP PR1200SP PR1200SP Please note that vessels on this page are supplied with qty (2) 1.5 In/Out Ports. Additional or larger ports are not included in the price. End Port Spare Parts Per Protec Series No: Part EP EP EP EP EP EP EP EP EP Protec Series End Plug Bearing Plate Bearing Ring Screw, Bearing Ring Adapter Seal OR OR OR Sealing Plate (for U-Cup) Sealing Plate (For Quad Seal) Feed/Concentrate Port Retaining Ring, F/C Port Feed/Concentrate Port Seal OR Clocking Tab Permeate Port, 1¼ NPTM Head Seal, O-Ring OR OR OR Head Seal, U-Cup Head Seal, Quad Seal HS80A HS80A HS80A HS80A HS80A HS80A Permeate Port Seal OR Retaining Ring, Perm. Port Retaining Ring w/ Finger Pull * Thrust Ring *No Finger Pull Side Port Spare Parts Per Protec Series No: Part SP SP SP SP SP SP SP SP Protec Series Bearing Plate Sealing Plate, O-Ring Sealing Plate, U-Cup Sealing Plate, Quad-Ring Retaining Ring, F/C Port Permeate Port, ½ NPTF Permeate Port, 1¼ NPTM Permeate Port, 1 NPTF Permeate Port, 1¼ Victaulic Head Seal, O-Ring OR OR Head Seal, U-Cup Head Seal, Quad-Ring HS80A HS80A HS80A HS80A HS80A HS80A Permeate Port Seal Retaining Ring, Perm Port Retaining Ring w/ Finger Pull Thrust Ring Adapter Seal OR OR Page 2-11

12 Pressure Vessel Components MOUNTING ACCESSORIES Mounting Clamps For PVC 4 Pressure Vessels PV-MC40 Click-Lock Style Mounting Click Clamps #113 for 4 Dia. Pressure Vessel PV-STPVC40 Mounting strap for 4 Dia. Pressure Vessel YCUP400 YCUF400 Unistrut Clamp with bolt for 4 Dia. Vessels, Plated Metal (Requires Channel Iron Listed Below) Unistrut Clamp with bolt for 4 Dia. Vessels, FRP (Requires Channel Iron Listed Below) Clamps For Stainless Steel 2, 2.5 & 4 Pressure Vessels PV-MC20 PV-MC25 YROECO42 PV-ST40A-SS YCUP218 YCUP258 YCUP418 Click-Lock Style Mounting Click Clamps #59 for 2.0 Dia. Pressure Vessel Click-Lock Style Mounting Click Clamps #71 for 2.5 Dia. Pressure Vessel Mounting Strap for 2.5 Dia. Vessel Mounting Strap for 4 Dia. Vessel Unistrut Clamp with bolt for 2 Dia. SS, Plated Metal Unistrut Clamp with bolt for 2.5 Dia. SS, Plated Metal Unistrut Clamp with bolt for 4 Dia. SS, Plated Metal Mounting Straps and Pads for FRP 4 and 8 Pressure Vessels YROECO41 PV-SA40AEA PV-SK80LSP PV-SK80BSP PV-SK80SSP PV-SK PV-SK PV-SK PV-SS80AES PV-SS PV-ST40A-U PV-ST80AEB PV-ST Saddle for 2.5 Dia. SS, FRP or PVC Vessel, 1 each Saddle for 4 Dia. SS, FRP or PVC Vessel, 1 each Saddle kit (2) 8 Codeline 150,250,300 psi s/p & end Saddle kit (2) 8 Codeline 400,450,600 psi s/p & end Saddle kit (2) 8 Codeline 1000,1200 psi s/p & end Saddle kit (2) 8 Protec 150, 300 psi s/p & end Saddle kit (2) 8 Protec 450, 600 psi s/p & end Saddle kit (2) 8 Protec 1000 psi s/p & end port Screw kit (46265) for straps 8 Codeline vessels Screw kit for straps 8 Protec vessels Strap kit (2) for 4 Dia. vessel Strap kit (2) for 8 Codeline vessels Strap Kit (2) for 8 Protec vessels Membrane Extraction Tools and Channel Iron PS Unistrut Channel Iron (For use with above clamps) 1 5 / 8 deep 1 5 / 8 wide PV-EXT14 PV-EXT38 PV-EXT12 PV-RRP25A PV-RRP40 PV-TS40 End Plug Extractor Tool for ¼ NPT Thread End Plug Extractor Tool for ⅜ NPT Thread End Plug Extractor Tool for ½ NPT Thread Retaining ring pliers for 2.5 snap rings Retaining ring pliers for 4.0 snap rings Retaining ring tip repair set. Page 2-12

13 Protec Pressure Vessel Components END ADAPTERS FOR 8 DIAMETER MEMBRANES Membrane Model Adapter Part No. FILMTEC* Seal Part No. Vessel PSI Type BW30 AD PV-OR2119SQR 300 M AD PV-OR2119SQR 450 M AD PV-OR2119SQR 600 M BW30LE-440 PV-OR2218SQR 300 M NF AD PV-OR2218SQR 450 M NF PV-OR2119SQR 600 M AD PV-OR2119SQR 300 M SG30-415FF AD PV-OR2119SQR 450 M AD PV-OR2119SQR 600 M SG30HR390FF AD PV-OR2119SQR 300 M SW30 AD PV-OR2119SQR 450 M AD PV-OR2119SQR 600 M AD PV-OR2119SQR 1000 M NF AD PV-OR2119SQR 300 M NF200B-400 AD PV-OR2119SQR 450 M HYDRANAUTICS ESPA1,2,3 ESNA 1, 2 CPA 2,3,4 LFC1,2 AD PV-OR2119SQR 300 M AD PV-OR2119SQR 450 M AD PV-OR2119SQR 600 M SWC AD PV-OR2119SQR M KOCH/FLUID SYSTEMS TFC 8821, 8921S TFC 8831, 8931S TFC 8822, TFC 8832 TFC 2822 TFC 2832 TRISEP 8040-TS80-TSA, 8040-ACM4-UWA, 8040-ACM2-UWA, 8040-ADM4-TSA, 8040-ACMA-TSA, 8040-ACM2-TSA, 8040-X201-TSA AD PV-OR2121SQR 450 M AD PV-OR2119SQR 450 M AD PV-OR2119SQR 1000 M AD PV-OR2218SQR 150,300, 450 AD PV-OR2218SQR 600 M M Membrane Model Adapter Part No. Seal Part No. Vessel PSI Type DESAL AD8040, AE840 AD PV-OR2119SQR 1000 M AD PV-OR2119SQR 300 M AG8040 AD PV-OR2119SQR 450 M AK8040, CG8040F, CE8040F, CD8040F, GE8040 AD PV-OR2119SQR 600 M AD PV-OR2119SQR 300 M AD PV-OR2119SQR 450 M HL8040 AD PV-OR2119SQR 300 M SE8040, SG8040, AD PV-OR2120SQR 300 M DK8040, DL8040, GE8040, GH8040, AD PV-OR2120SQR 450 M GM8040, GN8040, PW8040, SC8040 AD PV-OR2120SQR 600 M EW8040, JX8040 AD PV-OR2120SQR 300 M TORAY SU-220, SU-620, AD PV-OR1218SQR 450 F SU-720 SU-820 AD PV-OR1218SQR F TMG20 AD PV-OR2218SQR 300 M TM-720 AD PV-OR2119SQR 450 M TM-820 AD PV-OR2119SQR M OSMONICS AD PV-OR2119SQR 150,300 M 811, 813, 815HR, AD PV-OR2119SQR 450 M 817 AD PV-OR2119SQR 600 M AD PV-OR2119SQR 150,300 M 823 AD PV-OR2119SQR 450 M AD PV-OR2119SQR 600 M 825 AD PV-OR2119SQR 1000 M NITTO-DENKO All 8 AD PV-OR1218SQR 150,300, 450,600, 1000 F * Elements manufactured by FILMTEC after 4/1/01 have 1.50 diameter product water tubes; those prior to 4/1/01 have diameter product water tubes.. Page 2-13

14 Protec Pressure Vessel Components END ADAPTERS FOR 4 DIAMETER MEMBRANES Membrane Model Adapter Part No. AMI/APPLIED MEMBRANES Plugged Adapter No. Type Vessel PSI M-T4040A M-T4040ALE AD AD F 300 M-T4040AXLE M-B4040A AD AD F 450 M-B4040AHF M-C4040A AD AD F 600 M-S4040A AD AD F 1000 FILMTEC XLE-4040 BW30LE-4040 AD AD F 300 BW TW30HP-4040 AD AD F 450 TW NF AD AD F 600 SW AD AD F 1000 HYDRANAUTICS CPA ESPA ESPA ESPA ESPA LFC LFC SWC SWC KOCH/FLUID SYSTEMS ROGA 4040 CA TFC 4040 HF TFC 4040 HR TFC S 4040 PES UF TFC 4040 ULP TFC 4820 HR TFC 4820 XR TFC 4720 SR2 TFC 4920 S TFC 4820 ULP AD AD F 300 AD AD F 450 AD AD F 600 AD AD F 1000 AD AD F 300 AD AD F 450 AD AD F 600 TFC 4921 S TFC 4821 ULP AD M 300 TFC 4821 HR-N W AD M 300 TFC 4821 HR-NWHS ROGA 4221 HR AD M PES UF AD M 600 TFC1820 HF TFC 1820 SS AD AD F 1000 Membrane Model Adapter Part No. Plugged Adapter No. TRISEP 4040-ACM2-TSF 4040-ACM4-TSF 4040-X201-TSF 4040-TS80-TSF 4040-XN45-TSF 4040-SB20-TSA DESAL AD4040F AG4040F AG4040T AG4040C SC4040F SE4040F SG4040F SC4040CZH SE4040CZH SG4040CZH CD4040F CE4040F CG4040F AD4040FF AE4040FF AG4040FF AG4040TF AK4040FF OSMONICS 411 Type Vessel PSI AD AD F 300 AD AD F 450 AD AD F 600 AD M 300 AD M 450 AD M 600 AD M 300 AD M 450 AD M 600 AD M 1000 AD AD F 300 AD AD F 450 AD AD F 600 AD M 300 AD M 450 AD M 600. Page 2-14

15 CodeLine Pressure Vessel Components END ADAPTERS FOR 4 & 8 MEMBRANES Adapters for 40E 4 Dia. End Port Style, 600 PSI Membrane Model Adapter Seal Part No. CodeLine Number Number Part No. (new No. / Old No.) AMI/ APPLIED MEMBRANES All 4 40 AD PV-OR / FILMTEC BW30, TW AD PV-OR / HYDRANAUTICS All 4 40 AD PV-OR / DESAL All 4 26 & 4 25 AD PV-OR / F AD PV-OR / FF, 4040TF AD PV-OR / KOCH/FLUID SYSTEMS 4221, 4831, 4921, 4821, 4231 (60 ) AD PV-OR / , 1820 AD PV-OR / OSMONICS 411 AD PV-OR / /415 AD PV-OR / NITTO DENKO All 4 40 AD PV-OR / TRI-SEP 4 40 AD PV-OR / TSF AD PV-OR / TORAY 1100, 2100, 3100, 4100, SP110, SU210 AD PV-OR / Adapters for 40A 4 Dia. Side Port Style, 300 PSI Membrane Model Number Adapter Part No. Seal Part No. CodeLine Number (new No. / Old No.) AMI/APPLIED MEMBRANES All AD PV-OR / FILMTEC All AD PV-OR / HYDRANAUTICS LSA/LST AD PV-OR / LFT/LHT/LHA AD PV-OR / UST/UHT/UHA AD PV-OR / DESAL SE/SG/AD-4040 AD PV-OR / SC/CG/CE/CD-4040 AD PV-OR / SG4040C (sanitary mesh) AD PV-OR PV-OR / / AG-4040FF AD PV-OR / KOCH/FLUID SYSTEMS 4821/4921 AD AD OSMONICS 411 AD AD PV-OR PV-OR PV-OR PV-OR / / / / NITTO DENKO All AD PV-OR / TRI-SEP TST/TSF AD PV-OR / Adapters for 40E 4 Dia. End Port Style, 1000 PSI Membrane Model Adapter Seal Part No. CodeLine Number Number Part No. (new No. / Old No.) FILMTEC SW AD PV-OR / HYDRANAUTICS SWC1, SWC2 AD PV-OR / DESAL All 4 40 AD PR-OR / KOCH/FLUID SYSTEMS 1820S AD PV-OR / , 1831 AD PR-OR / OSMONICS 411 AD PV-OR / /415 AD PV-OR / NITTO DENKO All 4 40 AD PR-OR / TRI-SEP 4 40 AD PR-OR / TORAY 5100 AD PV-OR / Adapters for 80E & 80A 8 Dia. Membrane Adapter Part Seal Part No. Vessel Codeline Number Model Number No. PSI FILMTEC NF8040 AD PV-OR / BW30-365, 400 AD PV-OR / BW30LE-440 AD PV-OR , 50168/ BW30LE-440 AD PV-OR / SW8040 AD PV-OR / HYDRANAUTICS PSI PV PV-OR to / PSI+ PV PV-OR / DESAL All 8 40 AD-3016 PV-OR All 51395/ KOCH/FLUID SYSTEMS 2822, 2832 AD-7096 PV-OR All 50165/ , 8832 AD PV-OR All 50161/ , 8221, AD PV-OR All 51414/ , 8821 OSMONICS All 8 AD PV-OR / All 8 AD PV-OR / All 8 AD PV-OR / NITTO DENKO 1200, 2200 AD PV-OR All 51424/ TRI-SEP All 8 AD PV-OR / All 8 AD PV-OR / Also see membrane interconnectors on page Page 2-15

16 CodeLine Pressure Vessel Components COMPONENTS FOR DISCONTINUED MODELS Applied Membranes has stocked a full line of CodeLine products for many years. With a full history and understanding of these products, we are an excellent source for replacement components for existing and discontinued models. Many of these components are in stock for immediate shipment. Below are the most frequently purchased component parts. The entire range is available. Please call us if you do not see the item that you are looking for. AMI Part no. CodeLine No. 4B PV-EP40A End plug assy ½ x ½ end adapter type PV-EP40A-D End plug assy ½ x ½ direct connect type PV-RR40A 1CR Retaining ring Kit (2 per kit) U4B & S PV-HA40A-U Head assembly for U4B PV-HA40A-S Head assembly for U4S PV-PP40A Permeate Port for U4B & U4S PV-SP40A Sealing Plate for U4B & U4S PV-OR ER Internal o-ring for end cap PV-OR ER External o-ring for end cap End Adapters, 4B and U4 PV-AD (for 4B) FILMTEC, fluid systems, Desal, Hydranautics, Trisep and Osmonics male type 4x40 elements. PV-OR seals. PV-AD (for 4B) All 4x40 Desal Flush type. PV-OR seals. PV-AD (for U4B) FILMTEC, fluid systems, Desal, Hydranautics, Trisep and Osmonics male type BW 4x40 elements. PV-OR seals PV-AD (for U4S) FILMTEC, fluid systems, Desal, Hydranautics, Trisep and Osmonics male type SW 4x40 elements. PV-OR seals. Page 2-16

17 CodeLine Pressure Vessel Components COMPONENTS FOR DISCONTINUED MODELS E8 End Port PV-HA80A-EU Head assembly for E8U PV-HA80A-EL Head assembly for E8L PV-HA80A-EB Head assembly for E8B PV-HA80A-E Head assembly for E8S E8 Side Port PV-HA80USP Head assembly for E8U-SP PV-HA80LSP Head assembly for E8L-SP PV-HA80BSP Head assembly for E8B-SP PV-HA80SP Head assembly for E8S-SP End Adapters, E8 PV-AD FILMTEC/DOW BW30365,400 PV-AD FILMTEC/DOW BW30-LE440, PV-OR-125 seal PV-AD FILMTEC/DOW SW , Fluid sys 2822,2828, PV-OR seal PV-AD Desal, all 8x40, PV-OR seal PV-AD Osmonics 815, PV-OR seal AD Fluid Systems 8921,8221,8231, PV-OR seal PV Hydranautics, all 8 40 up to 600 PSI, PV-OR seal PV Hydranautics, all 8x40 over 600 PSI, PV-OR seal PV-AD Toray/Nitto Denko 1200,2200, PV-OR seal O-Ring Seals for All Vessel Sizes PV-OR ER Permeate port O-ring for 2.5S, internal o-ring for 2.5B PV-OR ER External End plug o-ring 2.5B and 2.5S PV-OR ER Internal o-ring for end cap, end adapter style, 4B & U4 PV-OR ER External o-ring for end cap, 4B & U4 PV-OR ER Concentrate port seal, U4 PV-HS80A 6ER Head seal for E8 end port or side port PV-PS80A 1ER Port seal for concentrate port, E8 end or side port PV-AS80A 1ER End adapter seal for E8 end or side port PV-OR ER End adapter seal for Hydranautics 8 elements. Page 2-17

18 Interconnectors for 4 & 8 Membranes FOR CONNECTION BETWEEN MEMBRANE ELEMENTS Membrane Manufacturer Membrane Style (Male or Flush) Interconnector Part Number * Seal Number # of Seals Each 4 Membranes AMI M PV-IN410 PV-OR FILMTEC M PV-IN410 PV-OR AMI F PV-IN420 PV-OR Desal F PV-IN420 PV-OR Fluid Systems M PV-IN410 PV-OR Toray M PV-IN410 PV-OR Osmonics F PV-IN460 PV-OR Membranes Used in FILMTEC BW30-365, BW30-400, LE-400, BW FR, BW FR, SG30-400, NF- 400 and Maple Sap Mark I Used in FILMTEC BW30LE-440, XLE-440, SG30-430, NF90-400, NF , and NF F PV-IN810 PV-OR F PV-IN811LE PV-OR Used in FILMTEC SW F PV-IN810S PV-OR SW30HRLE-400, SW30HR-380, SW30HR-320, and SW elements FILMTEC 365/400 to LE-440 PV-OR (for connecting from to 1.5 PWT) F PV-IN810LE PV-OR Desal F PV-IN820 PV-OR Fluid Systems F PV-IN830 PV-OR Toray F PV-IN840 PV-OR Osmonics F PV-IN850 PV-OR Hydranautics F PV-IN870 PV-OR *O-ring seals are included with interconnectors PV-IN410 PV-IN810 PV-IN420 Male Type (M) Flush Type (F) Also see end adapters on pages Page 2-18