Materials: Rigid PVC body, PVC end plugs, PVC reinforcement cuff, Stainless steel cuff bands

Transcription

1 PVC PRESSURE VESSELS AMI.5 DIAMETER, 00 PSI, U-PIN STYLE Attractive.5 PVC pressure vessels available for 14, 1 & 40 length membranes. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. U-Pin Style End Entry Maximum Operating Pressure: 00 PSI (14 BAR) Materials: Rigid PVC body, PVC end plugs, PVC reinforcement cuff, Stainless steel cuff bands Diameter Length Diameter Length Feed Brine Prod. In cm In cm In cm In cm PV514PVCAU ¼ ¼ ¼ PV51PVCAU ¼ ¼ ¼ PV540PVCAU ¼ ¼ ¼ Note: s sold complete with End Plugs, U-Pins, Feed Plug and O-Rings. Mounting Pads and Straps not included. Model No. Qty. per PV-EP5U End Plug with O-Rings PV-RR5U1 U-Pin PV-OR O-Ring for End Plug External PV-OR40-10 O-Ring for End Plug Internal Plug for Feed End, ¼ (64 MM) 1 End caps not interchangeable w/ssau model WARNING: PVC pressure vessels are limited to a maximum pressure of 00 psi (14 BAR) at 77ºF (5ºC). Higher pressure, higher temperature or water hammer will lead to a premature failure. It is highly recommended that when these conditions exist, a pressure switch or relief valve be installed to protect the vessel. Alternately, you may consider a stainless steel or FRP vessel.

2 PVC PRESSURE VESSELS AMI 4 DIAMETER, 00 PSI, U-PIN STYLE Attractive 4 PVC pressure vessels available for 1 & 40 length membranes. This style is designed for direct connection to / Applied Membranes and FILMTEC/DOW style elements. U-Pin Style End Entry Maximum Operating Pressure: 00 PSI (14 BAR) Materials: Rigid PVC body, PVC end plugs, PVC reinforcement cuff, Stainless steel cuff bands Diameter Length Diameter Length Qty. Feed Brine Prod. in cm in cm in cm in cm PV401PWG ½ ½ ½ PV4040PWG ½ ½ ½ PV4080PWG ½ ½ ½ Note: s sold complete with End Plugs, U-Pins, Feed Plug and O-Rings. Mounting Pads and Straps not included. Membrane Interconnectors are sold separately. Model No. Qty. per PV-EP40PD11 End Plug with O-Rings, ½ Brine x ½ Prod PV-EP40PD134 End Plug with O-Rings, ¾ Brine x ½ Prod PV-EP40PD1 End Plug with O-Rings, ½ Brine x ⅜ Prod PV-RR40U U-Pin PV-OR40-34 O-Ring for End Plug External PV-OR40-10 O-Ring for End Plug Internal Plug for Feed End, ½ MNPT Plug for Feed End, ⅜ MNPT 1 End caps not interchangeable w/ssau model WARNING: PVC pressure vessels are limited to a maximum pressure of 00 psi (14 BAR) at 77ºF (5ºC). Higher pressure, higher temperature or water hammer will lead to a premature failure. It is highly recommended that when these conditions exist, a pressure switch or relief valve be installed to protect the vessel. Alternately, you may consider a stainless steel or FRP vessel.

3 STAINLESS STEEL PRESSURE VESSELS AMI DIAMETER, 300 PSI, U-PIN STYLE Stainless Steel pressure vessels enhance system appearance and allow you to take full advantage of the membrane capability. Safer and more reliable than the PVC pressure vessels. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. U-Pin Style End Entry Maximum Operating Pressure: 300 PSI (0 BAR) Materials: 316 Stainless Steel Body, PVC End Plugs, SS U-Pins Diameter Length Diameter Length Feed Brine Prod. in cm in cm In cm In cm PV013SSAU ⅛ ⅛ ⅛ PV06SSAU ⅛ ⅛ ⅛ Note: s sold complete with End Plugs, U-Pins, Feed Plug and O-Rings. Mounting Pads and Straps not included. Model No. Qty. per PV-EP0SSU End Plug with O-Rings PV-RR0U U-Pin PV-OR0-36 O-Ring for End Plug Feed plug, 1/8 for feed end 1

4 STAINLESS STEEL PRESSURE VESSELS AMI.5 DIAMETER, 300 PSI, U-PIN STYLE Stainless Steel pressure vessels enhance system appearance and allow you to take full advantage of the membrane capability. Safer and more reliable than the PVC pressure vessels. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. U-Pin Style End Entry Maximum Operating Pressure: 300 PSI (0 BAR) Materials: 316 Stainless Steel Body, PVC End Plugs, SS U-Pins Diameter Length Diameter Length Feed Brine Prod. in cm in cm in cm in cm PV514SSAU ¼ ¼ ¼ PV51SSAU ¼ ¼ ¼ PV540SSAU ¼ ¼ ¼ Note: s sold complete with End Plugs, U-Pins, Feed Plug and O-Rings. Mounting Pads and Straps not included. Model No. Qty. per PV-EP5GWD End Plug with O-Rings, 1 Ports for Product End PV-EP5GWS End Plug with O-Rings, 1 1 Port for Feed End PV-RR5U U-Pin PV-OR O-Ring for End Plug External PV-OR40-10 O-Ring for End Plug Internal End caps not interchangeable w/pvcau model

5 STAINLESS STEEL PRESSURE VESSELS AMI 4 DIAMETER, 300 PSI, U-PIN STYLE Stainless Steel pressure vessels enhance system appearance and allow you to take full advantage of the membrane capability. Safer and more reliable than the PVC pressure vessels. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. U-Pin Style End Entry Maximum Operating Pressure: 300 PSI (0 BAR) Materials: 316 Stainless Steel Body, PVC End Plugs, SS U-Pins Diameter Length Diameter Length Qty. Feed Brine Prod. in cm in cm in cm in cm PV4014SSAU ½ ½ ½ PV401SSAU ½ ½ ½ PV4040SSAU ½ ½ ½ PV4080SSAU ½ ½ ½ Note: s sold complete with End Plugs, U-Pins and O-Rings. Feed Plug, Mounting Pads and Straps not included. Membrane Interconnectors are sold separately. Model No. Qty. per PV-EP40PD11 End Plug with O-Rings, ½ Brine ½ Product PV-EP40PD134 End Plug with O-Rings, ¾ Brine ½ Product PV-EP40PD1 End Plug with O-Rings, ½ Brine ⅜ Product PV-RR40U U-Pin PV-OR40-34 O-Ring for End Plug External PV-OR40-10 O-Ring for End Plug Internal Plug for Feed End, ½ MNPT Plug for Feed End, ⅜ MNPT 1 End caps not interchangeable w/pwg model

6 STAINLESS STEEL PRESSURE VESSELS AMI.5 DIAMETER, 50 PSI, END CLAMP STYLE End entry stainless steel pressure vessels have a smooth, sleek look. This unique design saves both time and money. Prices are competitive with other stainless steel and FRP pressure vessels. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. End Clamp End Entry Maximum Operating Pressure: 50 PSI (17 BAR) Materials: 316 Stainless Steel body, PVC End Plugs, SS Clamps Diameter Length Diameter Length Feed Brine Prod. in cm in cm in cm in cm PV514SSAW ⅜ ⅜ ¼ PV51SSAW ⅜ ⅜ ¼ PV540SSAW ⅜ ⅜ ¼ Note: s sold complete with End Plugs, End Clamps, and O-Rings. Feed end product port plug, Mounting Pads and Straps not included. Model No. Qty. per PV-EPW5PD3814 End Plug with O-Rings, ⅜ Brine x ¼ Product PV-CL5W End Clamp, single, with bolts & nuts Feed end product port plug, ¼ MNPT (not included with vessel, sold separately) 1 PV-OR5-39 O-Ring for End Plug External PV-OR40-10 O-Ring for End Plug Internal

7 STAINLESS STEEL PRESSURE VESSELS AMI 4 DIAMETER, 300 PSI, END CLAMP STYLE End entry stainless steel pressure vessels have a smooth, sleek look. This unique design saves both time and money. Prices are competitive with other stainless steel and FRP pressure vessels. This style is designed for direct connection to /Applied Membranes and FILMTEC/DOW style elements. End Clamp End Entry Maximum Operating Pressure: 300 PSI (0 BAR) Materials: 316 Stainless Steel body, PVC End Plugs, SS Clamps Diameter Length Diameter Length Qty. Feed Brine Prod. in cm in cm in cm in cm PV4040SSAW ½ ½ ½ PV4080SSAW ¾ ¾ ½ Note: s sold complete with End Plugs, End Clamps, and O-Rings. Feed end product port plug, Mounting Pads and Straps not included. Membrane Interconnectors are sold separately. Model No. Qty. per PV-EPW40PD11 End Plug with O-Rings, ½ Brine x ½ Product PV-EPW40PD341 End Plug with O-Rings, ¾ Brine x ½ Product PV-CL40W End Clamp, single, with bolts & nuts Feed end product port plug, ½ MNPT (not included with vessel, sold separately) 1 PV-OR40-34 O-Ring for End Plug External 4 PV-OR40-10 O-Ring for End Plug Internal

8 FIBERGLASS PRESSURE VESSELS.5 DIA. END PORT 1000 PSI SW MEMBRANE HOUSINGS AMI fiberglass housings are suitable for seawater conditions, rated at 1000 psi. The vessels use a strong coated fiberglass and feature machined, duplex end caps for extended life under corrosive conditions. The end caps are end-ported configuration and are designed for direct connection to Applied Membranes and FilmTec/DOW.5 standard male style elements. End port/end-entry design End plate locking kit, securing ring and screws Maximum Operating Pressure: 1,000 PSI (68 BAR) Qualification Pressure: 6000 PSI (414 BAR) Operating Temperature: 14 F-150 F Materials: FRP/Fiberglass Shell, Stainless Steel End Plate, Securing Ring, Locking Kit and Screws Dia. Length Dia. Length in cm in cm in cm in cm Feed Brine Prod F C ¼ FNPT ¼ FNPT ¼ FNPT F C ¼ FNPT ¼ FNPT ¼ FNPT F C ¼ FNPT ¼ FNPT ¼ FNPT Note: Fiberglass membrane pressure vessels sold complete with end plates and end closure hardware (detailed below). Feed/brine port fittings and mounting hardware are not included. High Pressure Feed/Brine Port Fittings (Not Included) Model No. Qty. Needed Per 8-4 FTX-SS 1/4" NPT x 1/" Flare Fitting 8CM4316 1/4" NPT x 1/" Tube Fitting 8-4 FTX-SS 8CM4316 Model No. Qty. Per RP-0041* End Plug RP-009.1* Locking Kit Segment sets RP-01* Securing Ring RP-010* Screws for Securing Ring 4 RP-56X3.55GGB/T* O-ring RP-19X.65GGB/T* O-ring 4 *Note: Items marked with (*) are included with pressure vessel assembly.

9 FIBERGLASS PRESSURE VESSELS.5 DIA. SIDE PORT 1000 PSI SW MEMBRANE HOUSINGS AMI fiberglass housings are suitable for seawater conditions, rated at 1000 psi. Corrosion resistant filament wound fiberglass reinforced epoxy tubing suitable for seawater conditions. Used for watermakers and other land-and-sea based seawater desalination reverse osmosis systems, this style of fiberglass membrane housing is designed for direct connection to Applied Membranes and FilmTec/DOW.5 standard male style elements. Side Port/Side Entry Design Retaining Plates with Screws Maximum Operating Pressure: 1,000 PSI (68 BAR) Materials: FRP/Fiberglass body, Filament wound fiberglass reinforced epoxy tubing, PVC End Plugs, Aluminum End Rings Dia. Length Dia. Length Product Feed/Brine Port in cm in cm in cm in cm Port PV51PRO ¾ 16 SAE J514 Straight FNPT ⅛ FNPT PV540PRO ¾ 16 SAE J514 Straight FNPT ⅛ FNPT Note: Fiberglass membrane pressure vessels sold complete with end plates and end closure hardware (detailed below). Feed/brine port fittings and mounting hardware are not included. Feed/Brine Port Fittings (Required for Installation Select Appropriate Type) Model No. Qty. Needed Per PL-MTS-3/4Sx1/ Fitting for Connection of Tubing or High Pressure Hose to ¾-16 SAE x ½ PL-MFF-3/4Sx1/ Fitting for Connection of SS Tubing to ¾-16 SAE x ½ 37 JIC Flare PL-MTS-3/4Sx1 PL-MFF-3/4Sx1/ Model No. Qty. Per FT-PV-EP* End Plug for.5 FRP SW Pressure FT-PV-ER* End Ring for.5 FRP SW Pressure HDW-TL-CYLT Spanner Wrench for.5 FRP SW Pressure 1 PL-HP-1/8* NPT Nylon Port Plug 3 PL-NP-1/8N* Nylon Close Nipple 1 KIT-PVA-SEAL* O-Ring Kit with Grease Pack for.5 Pressure 1 KIT-PV-5PVMK Mounting Kit for.5 FRP SW Pressure 1 *Note: Items marked with (*) are included

10 CODELINE FRP PRESSURE VESSELS 4 & 8 RO/UF/SEAWATER MEMBRANE HOUSINGS Key features of CodeLine 4 & 8 vessels include: Mirror finish I.D for easy & quick loading & unloading of membranes; Quick lock head retention system for quick access to membranes; Exteriors coated with high gloss polyurethane paint for UV resistance; ASME (American Society of Mechanical Engineers) compliant & CE marking. for 4 40 Membranes Pressure Rating (PSI) Port Type (E=End, S=Side) 1 Membrane (Approx. 40 L) Model Number Per Length, in Number of 4 40 Elements per Membranes (Approx. 80 L) 3 Membranes (Approx. 10 L) 4 Membranes (Approx. 160 L) 5 Membranes (Approx. 00 L) 6 Membranes (Approx. 40 L) Series 40E: 4 Diameter End Port ¾ NPT Female Feed/Concentrate Ports, ½ NPT Female Permeate Port 300 E 40E30N-1WHITE 40E30N-WHITE 40E30N-3WHITE E 40E E60-40E E E E E 40E E100-40E E E E100-6 Series 40S: 4 Diameter Side Port 1 IPS Pipe Feed/Concentrate Ports, ½ NPT Female Permeate Port 300 S 40S S30-40S S S S S 40S S45-40S S S S S 40S S60-40S S S S60-6 Please specify the element model and manufacturer when ordering to ensure the correct interface hardware is included. 40E30N Series is available in blue or white exterior finish. To order in blue, use part # ending in BLUE instead of WHITE. Example: 40E30N-1BLUE for 8 40 Membranes Pressure Rating (PSI) Port Type (E=End, S=Side) 1 Membrane (Approx. 40 L) Model Number Per Length, in Number of 8 40 Elements per Membranes (Approx. 80 L) 3 Membranes 4 Membranes 5 Membranes 6 Membranes 7 Membranes (Approx. 10 L) (Approx. 160 L) (Approx. 00 L) (Approx. 40 L) (Approx. 80 L) Series 80E: 8 Diameter End Port s 1.5 IPS Pipe Feed/Concentrate Ports, 1 NTP Female Permeate Port 300 E 80E E30-80E E E E E E 80E E45-80E E E E E E 80E E60-80E E E E E E 80E E100-80E E E E E E 80E E10-80E E E E E10-7 Series 80S ASME Coded 8 Diameter Side Port 1.5 IPS Pipe Feed/Concentrate Ports, 1 NTP Female Permeate Port 150 S 80S15A-1 80S15A- 80S15A-3 80S15A-4 80S15A-5 80S15A-6 80S15A S 80S30A-1 80S30A- 80S30A-3 80S30A-4 80S30A-5 80S30A-6 80S30A S 80S45A-1 80S45A- 80S45A-3 80S45A-4 80S45A-5 80S45A-6 80S45A S 80S60A-1 80S60A- 80S60A-3 80S60A-4 80S60A-5 80S60A-6 80S60A S 80S100A-1 80S100A- 80S100A-3 80S100A-4 80S100A-5 80S100A-6 80S100A S 80S10A-1 80S10A- 80S10A-3 80S10A-4 80S10A-5 80S10A-6 80S10A-7 Series 80S Non-Coded 8 Diameter Side Port 1.5 IPS Pipe Feed/Concentrate Ports, 1 NTP Female Permeate Port 150 S 80S S15-80S S S S S S 80S S30-80S S S S S S 80S S45-80S S S S S S 80S S60-80S S S S S60-7 Series 80H High Flow 8 Diameter Side Port 3 IPS Pipe Feed/Concentrate Ports, 1 NTP Female Permeate Port 150 S 80H H15-80H H H H H S 80H H30-80H H H H H S 80H H45-80H H H H H S 80H H60-80H H H H H S 80H H100-80H H H H H S 80H H10-80H H H H H10-7 Series 80U Ultra High Flow 8 Diameter Side Port 4 IPS Pipe Feed/Concentrate Ports, 1 NTP Female Permeate Port 300 S 80U U30-80U U U U U S 80U U45-80U U U U U S 80U U60-80U U U U U60-7 Please specify the element model and manufacturer when ordering to ensure the correct interface hardware is included.

11 CODELINE FRP PRESSURE VESSELS SPARE PARTS FOR 4 & 8 HOUSINGS for 40E Series 4 Dia. End Port for 40S Series 4 Dia. Side Port 40E30N-* 40E60-* 40E100-* Head Assembly End Plug n/a Plug Seal PV-OR40-34 PV-OR40-34 PV-OR40-34 Bearing Plate n/a n/a Seal Plate n/a n/a Permeate Port n/a n/a Permeate Port Seal n/a n/a PV-OR40-10 Port Retainer n/a n/a 4544 Feed/Conc. Port n/a n/a 4747 Adapter Seal PV-OR PV-OR PV-OR Retaining Ring S30-* 40S45-* 40S60-* Bearing Plate Sealing Plate Head Seal PV-OR40-34 PV-OR40-34 PV-OR40-34 Permeate Port Permeate Port Seal Port Retainer Retaining Ring Adapter Seal PV-OR PV-OR PV-OR End Plug for 80E Series 8 Dia. End Port : 80E30 80E45 80E60 80E100 80E10 Head Assembly Bearing Plate Sealing Plate Feed/Conc. Port Port Retainer Port Nut n/a Permeate Port Permeate Port Seal PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 Head Seal PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD Retaining Ring Adapter Seal PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 Thrust Ring for 80S Series 8 Dia. Side Port 80S15 80S30 80S45 80S60 80S100 80S10 Bearing Plate Sealing Plate Permeate Port Port Nut Head Seal PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD Permeate Port Seal PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 Retaining Ring Adapter Seal PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 Thrust Cone for 80H & 80U High-Flow and Ultra-High Flow Series 8 Dia. Side Port 80H15 80H30 80H45 80H60 80H100 80H10 80U30 80U45 80U60 Bearing Plate Sealing Plate Permeate Port Port Nut Head Seal PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD PV-OR80-44-QD Perm. Port Seal PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 PV-OR80-5 Retaining Ring Adapter Seal PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 PV-OR80-14 Thrust Cone Spacer n/a n/a n/a n/a n/a n/a Please contact us for information on spare parts not listed. model & serial number and/or membrane model may be required.

12 PROTEC FRP PRESSURE VESSELS 4 RO/UF/SEAWATER MEMBRANE HOUSINGS for 4 40 Membranes These models are designed for continuous use housing membrane filtration elements to purify typical waters at any positive pressure up to 1000 PSI. The design will accommodate any make of four-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel. The models have been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped. Pressure Rating (PSI) 1 Membrane (Approx. 40 L) Model Number Per Length, in Number of 4 40 Elements per Membranes 3 Membranes 4 Membranes 5 Membranes (Approx. 80 L) (Approx. 10 L) (Approx. 160 L) (Approx. 00 L) 6 Membranes (Approx. 40 L) End Port 300 PRO EP-1 PRO EP- PRO EP PRO EP-1 PRO EP- PRO EP-3 PRO EP-4 PRO EP-5 PRO EP PRO EP-1 PRO EP- PRO EP-3 PRO EP-4 PRO EP-5 PRO EP-6 Side Port 300 PRO SP-1 PRO SP- PRO SP-3 PRO SP-4 PRO SP-5 PRO SP PRO SP-1 PRO SP- PRO SP-3 PRO SP-4 PRO SP-5 PRO SP-6 Please note that vessels on this page are supplied with qty. () In/Out Ports. Additional or larger ports are not included in the price. Please specify the element model and manufacturer when ordering to ensure the correct interface hardware is included. for End Port Protec 4 PRO EP-* Part No. Qty Shell End Plug, ½ NPT Feed End Plug, ¾ NPT Feed Retaining Ring (w/ finger pull) 4 PV-OR40-34 Head Seal PV-OR Adapter Seal PRO EP-* Part No. Qty Shell End Plug Bearing Ring Screw, Bearing Ring Retaining Ring (w/ finger pull) PV-OR40-34 Head Seal PV-OR Adapter Seal PRO EP-* Part No. Qty Shell Bearing Plate Sealing Plate Feed/Conc. Port Retaining Ring (F/C Port) Clocking Tab Retaining Ring (w/ finger pull) PV-OR40-34 Head Seal PV-OR Adapter Seal PV-OR40-10 Seal, F/C & Perm. Port for Side Port Protec 4 Mounting Accessories PRO SP-* Part No. Qty Shell Bearing Plate Sealing Plate Feed/Conc. Port A/R Retaining Ring, F/C Port A/R Retaining Ring (w/ finger pull) PV-OR40-34 Head Seal N F/C Port Seal, Square A/R N Permeate Port Seal, Sq. PV-OR Adapter Seal PRO SP-* Part No. Qty Shell Bearing Plate Sealing Plate Feed/Conc. Port A/R Retaining Ring, F/C Port A/R Retaining Ring (w/ finger pull) PV-OR40-34 Head Seal N F/C Port Seal, Square A/R N Permeate Port Seal, Sq. PV-OR Adapter Seal Mounting Accessories for All 4 Protec Membrane Housings (Sold Separately) Part No. Qty Strap Assembly, Stainless Steel, 300 Series Support Saddle, * Polyurthane Strap Screw, Stainless 4 Steel, 300 Series *3 with each shell length -4 and longer Please contact us for information on spare parts not listed. model & serial number and/or membrane model may be required.

13 PROTEC FRP PRESSURE VESSELS 8 RO/UF/SEAWATER MEMBRANE HOUSINGS for 8 40 Membranes These models are designed for continuous use housing membrane filtration elements to purify waters at any positive pressure up to 100 PSI. The design will accommodate any make of eight-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel. The models have been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped. Models with a PSI of purify typical brackish waters while models with a PSI of purify typical seawater. Model Number Per Length, in Number of 8 40 Elements per Pressure Rating (PSI) 1 Membrane (40 L) Membranes (80 L) 3 Membranes (10 L) 4 Membranes (160 L) 5 Membranes (00 L)) 6 Membranes (40 L) 7 Membranes (80 L) End Port 300 PRO EP-1 PRO EP- PRO EP-3 PRO EP-4 PRO EP-5 PRO EP-6 PRO EP PRO EP-1 PRO EP- PRO EP-3 PRO EP-4 PRO EP-5 PRO EP-6 PRO EP PRO EP-1 PRO EP- PRO EP-3 PRO EP-4 PRO EP-5 PRO EP-6 PRO EP PRO EP-1 PRO EP- PRO EP-3 PRO EP-4 PRO EP-5 PRO EP-6 PRO EP PRO EP-1 PRO EP- PRO EP-3 PRO EP-4 PRO EP-5 PRO EP-6 PRO EP-7 Side Port 300 PRO SP-1 PRO SP- PRO SP-3 PRO SP-4 PRO SP-5 PRO SP-6 PRO SP PRO SP-1 PRO SP- PRO SP-3 PRO SP-4 PRO SP-5 PRO SP-6 PRO SP PRO SP-1 PRO SP- PRO SP-3 PRO SP-4 PRO SP-5 PRO SP-6 PRO SP PRO SP-1 PRO SP- PRO SP-3 PRO SP-4 PRO SP-5 PRO SP-6 PRO SP PRO SP-1 PRO SP- PRO SP-3 PRO SP-4 PRO SP-5 PRO SP-6 PRO SP-7 *Please note that vessels on this page are supplied with qty. () 1.5 In/Out Ports. Additional or larger ports are not included in the price. Please specify the element model and manufacturer when ordering to ensure the correct interface hardware is included. for End Port Protec 8 s Part For Protec Series No: EP EP EP EP EP EP Bearing Plate Adapter Seal N N N N N N Sealing Plate Feed/Concentrate Port Retaining Ring, F/C Port Feed/Concentrate Port Seal N N N N N N Head Seal U-Cup Head Seal Quad Seal MK MK MK MK MK MK Permeate Port Seal N N N N N N Retaining Ring w/ finger pull Thrust Ring for Side Port Protec 8 s Part For Protec Series No: SP SP SP SP SP SP Bearing Plate Adapter Seal N N N N N N Sealing Plate U-Cup Feed/Concentrate Port Retaining ring F/C Port Head Seal U-Cup Head Seal Quad-Ring MK MK MK MK MK MK Permeate Port Seal N N N N N N Retaining Ring w/ Finger Pull Please contact us for information on spare parts not listed. model & serial number and/or membrane model may be required.

14 PRESSURE VESSEL COMPONENTS MOUNTING ACCESSORIES Mounting Clamps for PVC 4 Model No Click-Lock Style Mounting Click Clamps #113 for 4 Dia. PV-STPVC40 YCUP400* Mounting Strap for 4 Dia. Pressure Unistrut Clamp with bolt for 4 Dia. s, Plated Metal YCUF400* Unistrut Clamp with bolt for 4 Dia. s, FRP * Unistrut clamps are for mounting onto channel iron in a system frame. Mounting Clamps for Stainless Steel,.5 & 4 Model No Click-Lock Style Mounting Click Clamps #0 for ½ Dia. Pressure Click-Lock Style Mounting Click Clamps #5 for ¾ Dia. Pressure Click-Lock Style Mounting Click Clamps #3 for ½ Dia. Pressure Click-Lock Style Mounting Click Clamps #47 for 1 ½ Dia. Pressure Click-Lock Style Mounting Click Clamps #59 for Dia. Pressure Click-Lock Style Mounting Click Clamps #71 for ½ Dia. Pressure PV-ST40A-SS Mounting Strap for 4 Dia. YCUP18-OD* Unistrut Clamp with bolt for Dia. SS, Plated Material YCUP58-OD* Unistrut Clamp with bolt for.5 Dia. SS, Plated Material YCUP418-OD* Unistrut Clamp with bolt for 4 Dia. SS, Plated Material * Unistrut clamps are for mounting onto channel iron in a system frame. Mounting Straps and Saddle Pads for FRP 4 and 8 Model No. PV-SA40AEA Saddle for All 4 Dia. SS, FRP or PVS, 1 each Support Saddle (1 pc.) for 4 Protec Housings Strap Assembly for 4 Protec Housings (Universal) Support Saddle (1 pc.) for 8 150/300psi Protec Housings Support Saddle (1 pc.) for 8 450/600psi Protec Housings Support Saddle (1 pc.) for /100psi Protec Housings Strap Assembly for 8 Protec Housings (Universal) Screw for straps for 4 & 8 Protec Housings Strap/Each for 4 CodeLine Housings (Universal) Saddle/Each for 4 CodeLine Housings (Universal) 5169 Saddle/Each for 8 CodeLine Housings (Universal) 4504 Strap/Each for 8 CodeLine Housings (Universal) 4665 Screw for straps for 8 CodeLine Housings Membrane Extraction Tools and Channel Iron Model No. PV-EXT14 PV-EXT38 End Plug Extractor Tool for 1/4 NPT thread End Plug Extractor Tool for 3/8 NPT thread

15 PRESSURE VESSEL COMPONENTS MEMBRANE INTERCONNECTOR COUPLERS Interconnectors for 4 Diameter Membrane Elements Model No. PV-IN410 PV-IN40 PV-IN440 Standard Style Coupler Flush-Cut Style Coupler Full-Fit Style Coupler For Membranes with Permeate Tube Size (Dia.) Style 0.75 OD Male 0.65" ID Flush Compatible with Membrane Manufacturer(s) AMI FilmTec Hydranautics Koch Toray AMI Desal Koch Seals Included (Can be ordered Separately using Part # s Below) PV-OR40-10 () PV-OR (4) 0.75 OD Full-Fit FilmTec PV-OR40-10 () PV-IN410 PV-IN40 Male Type Flush Type Full-Fit Interconnectors for 8 Diameter Membrane Elements Model No. For Membranes with Permeate Tube Size (Dia.) Style Compatible with Membrane Manufacturer(s) Seals Included (Can be ordered Separately using Part # s Below) PV-IN810 FilmTec Standard Tube Membrane Coupler for Brackish & Seawater Elements 1.15 ID Flush FilmTec PV-OR80-91 () PV-IN811LE FilmTec Large Tube Membrane Coupler for Brackish & Seawater Elements 1.5 ID Flush FilmTec PV-OR80-18 () PV-IN810LE FilmTec Step-Down Coupler for use between 1.15 ID PV-OR80-91 () Flush FilmTec Std-Tube & Large-Tube Membrane Elements to 1.5 ID PV-OR80-18 (1) PV-IN880 FilmTec Full-Fit Membrane Coupler 1.15 ID Full-Fit FilmTec PV-OR80-91 () PV-IN870 Hydranautics Brackish Membrane Coupler 1.15 ID Flush Hydranautics PV-OR80-91 () PV-IN870S Hydranautics Seawater Membrane Coupler 1.15 ID Flush Hydranautics PV-OR80-91 () PV-IN830 Koch Membrane Coupler 1.15 ID Flush Koch PV-OR80-91 () PV-IN840 Toray Standard Tube Membrane Coupler 1.15 ID Flush Toray PV-OR80-91 () PV-IN841L Toray Large Tube Membrane Coupler 1.5 ID Flush Toray PV-OR80-18 () PV-IN810