FlameGuard WEIGHTS & DIMENSIONS CPVC FIRE SPRINKLER PIPING PRODUCTS. July 1, 2004 SUPERSEDES ALL PREVIOUS EDITIONS FG
|
|
- Ariel Holland
- 5 years ago
- Views:
Transcription
1 Flameuard CPVC FIRE SPRIKER PIPI PRODUCTS WEITS & DIESIOS July 1, 2004 SUPERSEDES A PREVIOUS EDITIOS Visit our web site: F
2 The information contained in this publication is based on current information and Product design at the time of publication and is subject to change without notification. Our ongoing commitment to product improvement may result in some variation. o representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or results to be obtained therefrom. For verification of technical data or additional information not contained herein, please contact Spears Technical Services Department [West Coast: (818) East Coast: (714) ]. eneral Information RECOEDATIOS FOR ISTAERS AD USERS: Plastic piping systems should be EIEERED, ISTAED and OPERATED in accordance with ESTABISED DESI AD EIEERI STADARDS AD PROCEDURES for plastic piping systems. Suitability for the intended service application should be determined by the installer and/or user prior to installation of a plastic piping system. All Installation and maintenance personnel should be trained in the proper handling and installation requirements and precautions of plastic piping systems. PRIOR TO ASSEBY, all piping system components should be inspected for damage or irregularities. ating components should be checked to assure that tolerances and engagements are compatible. Do not use any components that appear irregular or do not fit properly. Contact the appropriate manufacturer of the component product in question to determine usability. Consult all applicable codes and regulations for compliance prior to installation. Installation must be made in accordance with SPEARS AUFACTURI COPAY FIRE SPRIKER PIPI PRODUCTS Installation Instructions - FS-3 OTE Individual or group instruction in correct solvent welding procedures is available by contacting your local distributor or your servicing Spears Regional Distribution Center. SOVET CEET COECTIOS Spears anufacturing Company recommends the use of Spears Two Step FS-1 primer with FS-3 solvent cement OR Spears FS-5 One Step solvent cement for joining Spears products. Use of solvent cementing products not approved for CPVC fire sprinkler systems, or failure to follow installation instructions will automatically void the warranty. TREADED COECTIO Spears anufacturing Company recommends the use of Spears BUE 75 Thread Sealant.This product has been tested by Spears and the sealant manufacturer for compatibility with the Spears CPVC fire sprinkler products.consult the sprinkler head manufacturer before using this product. WARI: OTER PIPE JOIT COPOUDS OR PASTES AY COTAI SUBSTACES TAT COUD CAUSE STRESS CRACKI I TE CPVC OR OTER FITTI COPOETS. Care must be taken to avoid overtorquing - generally 1 to 2 turns beyond finger tight is all that is required to make up a threaded connection. Factory testing has indicated ft. lbs. of torque is adequate to obtain a leak free seal. OT FOR USE WIT COPRESSED AIR OR ASES WARI: DO OT USE COPRESSED AIR OR AS TO TEST AY PVC OR CPVC TEROPASTIC PIPI PRODUCT OR SYSTE, AD DO OT USE DEVICES PROPEED BY COPRESSED AIR OR AS TO CEAR SYSTES. TESE PRACTICES AY RESUT I EXPOSIVE FRAETATIO OF SYSTE PIPI AD COPOETS CAUSI SERIOUS OR FATA BODIY IJURY. Dimension Reference = (AYI ET) Intersection of center lines to bottom of socket/thread; 90 elbows, tees, crosses; ± 1/32 inch. = Intersection of center lines to face of fitting; 90 elbows tees, crosses; ± 1/32 inch. J = Intersection of center lines to bottom of socket/thread; 45 elbows; ± 1/32 inch = Overall length of fittings; ± 1/16 inch. = Outside diameter of socket/thread hub; ± 1/16 inch. = Socket bottom to socket bottom; couplings; ± 1/16 inch. Q = Width of flats; ±1/16 inch. W = eight of cap; ± 1/16 inch. CPVC FIRE SPRIKER PIPE SDR (AST F 442) Part umber ominal Size Average OD Average ID Approx. Weight bs./ft. Inches (mm) Inches (mm) Inches (mm) CP-007 3/4 (19.1) (26.7).874 (22.5).181 CP-010 1/2 (25.4) (33.4) (28.2).280 CP /4 (31.8) (42.2) (35.6).418 CP /2 (38.1) (48.3) (40.7).550 CP (50.8) (60.3) (50.9).872 CP /2 (63.5) (73.0) (61.5) CP (76.2) (88.9) (75.0) SPEARS AUFACTURI COPAY
3 TEE Soc x Soc x Soc Part umber Size Approx. Wt. (bs.) /4 17/32 1-9/16 3-1/8 1-5/ / /16 3-5/8 1-5/ /4 7/8 2-1/8 4-1/4 1-31/ /2 1-3/16 2-9/16 5-1/8 2-11/ / /16 5-7/8 2-7/ /2 1-19/ / / / / /16 7-7/8 4-3/ REDUCI TEE Soc x Soc x Soc Part umber Size Approx. Wt. (bs.) /4x3/4x1 27/32 11/16 27/ / / / / / / / x3/4x3/4 11/16 3/4 5/8 1-13/16 1-3/4 1-5/8 3-7/16 1-5/8 1-5/16 1-5/ x3/4x1 3/4 1-7/8 1-3/ / / / / / / / x1x3/4 21/32 13/16 21/ / / /32 3-9/16 1-5/8 1-5/16 1-5/ /4x1x3/4 11/16 1-1/32 23/ /16 2-1/ / /32 2-3/ / / /4x1x1 7/8 31/32 3/4 2-1/8 2-1/16 1-7/ /32 1-5/ /4x1x1-1/4 15/16 31/ /16 2-7/32 2-3/32 4-9/32 2-3/32 2-3/ / /4x1-1/4x3/4 21/ / / / / / /4x1-1/4x1 13/ /16 2-1/16 2-1/8 2-1/16 4-1/8 1-31/32 1-5/8 1-31/ /4x1-1/4x1-1/2 1-1/8 15/16 1-1/8 2-3/8 2-11/32 2-3/8 4-3/4 2-3/ /32 2-3/ /2x1-1/4x3/4 11/16 1 1/4 2-1/ / /16 1-3/8 2-1/ /2x1-1/4x1 27/32 1-1/ /32 2-5/32 2-1/4 4-15/32 2-5/ /16 2-1/ /2x1-1/2x3/4 23/32 1-1/16 23/32 2-3/32 2-1/32 2-3/32 4-3/16 2-5/16 1-3/8 2-5/ /2x1-1/2x1 27/32 1-3/16 27/32 2-1/4 2-5/16 2-1/4 4-1/2 2-11/ /32 2-7/ /2x1-1/2x1-1/ / /8 2-11/32 2-3/8 4-13/ /32 2-3/ / /2x1-1/2x2 1-5/16 1-1/8 1-5/ / / /16 5-3/8 2-11/ / /32.72 ADE I TE U.S.A. 2
4 REDUCI TEE Soc x Soc x Soc Part umber Size Approx. Wt. (bs.) x2x3/4 11/ /32 11/16 2-7/32 2-7/16 2-7/32 4-7/ /32 1-3/8 2-27/ x2x1 7/8 1-7/16 7/8 2-3/8 2-9/16 2-3/8 4-3/4 2-27/ / / x2x1-1/2 1-7/ /32 1-7/ / / /16 5-3/8 2-27/ / / /2x2-1/2x1 29/32 25/32 29/ / / /32 5-5/16 3-1/2 1-23/32 3-1/ /2x2-1/2x1-1/4 1-3/ /32 1-3/ / / / /16 3-1/2 2-3/32 3-1/ /2x2-1/2x1-1/2 1-3/16 1/2 1-3/ /16 1-7/8 2-15/16 5-7/8 3-15/ / / x3x2 1-7/ /16 1-7/16 3-5/16 3-5/16 3-5/16 6-5/8 4-5/32 2-7/8 4-5/ x3x2-1/2 1-3/4 1-31/32 1-3/4 3-5/8 3-23/32 3-5/8 7-1/4 4-5/32 3-7/16 4-5/ STREET TEE Spig x Soc x Soc PIPE O.D Part umber Size Approx. Wt. (bs.) /2 23/32 23/32 23/ / / /32 3-5/32 1-3/16 1-3/ /4 13/16 27/32 27/ /16 1-7/8 1-7/8 3-5/8 1-13/ / /32 1-1/32 1-1/32 2-1/8 1-29/ /32 4-3/16 1-3/4 1-3/ /4 1-1/ /16 2-9/32 2-9/ /32 2-3/32 2-3/ /2 1-13/16 1-1/8 1-1/8 2-7/8 2-9/16 2-9/ / / / /16 1-7/8 1-7/16 3-1/4 2-29/ /32 6-1/8 2-27/ / SPEARS AUFACTURI COPAY
5 SPRIKER EAD TEE etal Thread Insert Style Soc x Soc x Fipt Part umber Size Approx. Wt. (bs.) /4x3/4x1/2 15/32 15/16 15/ /32 1-9/ / /16 1-3/8 1-7/32 1-3/ x3/4x1/2 15/32 1-1/16 19/ / / /32 3-5/ /32 1-7/32 1-3/ x1x1/2 15/32 1-1/16 15/ / / /32 3-3/ /32 1-7/ / /4x1x1/2 15/32 1-9/32 19/ / / /32 3-3/8 2-1/16 1-7/ / /4x1-1/4x1/2 15/ /32 15/ / / /32 3-7/16 2-3/32 1-7/32 2-3/ /2x1-1/4x1/2 7/ /32 9/ /16 2-3/ / /16 2-5/16 1-7/32 2-1/ /2x1-1/2x1/2 1/2 1-15/32 1/2 1-7/8 2-3/32 1-7/8 3-3/4 2-5/16 1-7/32 2-5/ x1-1/2x1/2 17/ /32 21/32 2-1/ /32 2-1/ / /32 1-7/ / x2x1/2 17/ /32 17/32 2-1/ /32 2-1/32 4-1/ /32 1-7/ /32.58 SPRIKER EAD TEE Special Reinforced Plastic Thread Style Soc x Soc x SR Fipt Part umber Size Approx. Wt. (bs.) SR 3/4x3/4x1/2 5/8 3/4 5/8 1-5/8 1-7/16 19/32 3-1/4 1-3/8 1-3/16 1-3/ SR 1x3/4x1/2 7/16 29/32 9/ /32 1-5/8 1-9/16 3-5/ /32 1-3/ / SR 1x1x1/2 7/16 29/32 7/16 1-9/ /32 1-9/16 3-1/8 1-23/32 1-3/ / SR 1x1x1 11/16 15/16 11/ / / / / / / / SR 1-1/4x1x1/2 15/32 1-3/32 19/ /32 1-7/8 1-23/ /32 2-3/32 1-3/ / SR 1-1/4x1-1/4x1/2 15/32 3/4 15/ / /32 19/32 3-7/16 2-3/32 1-3/16 2-3/ SR 1-1/2x1-1/4x1/2 9/16 1-9/32 17/ / / / /32 1-3/16 2-3/ SR 1-1/2x1-1/2x1/2 1/2 1-1/4 1/2 1-7/8 1-31/32 1-7/8 3-3/4 2-11/32 1-3/ / SR 1-1/2x1-1/2x1 7/8 1-3/16 7/8 2-1/4 2-3/32 2-3/32 4-1/2 2-11/ /32 2-1/ SR 2x2-1/2x1/2 23/32 1-9/16 3/8 2-7/32 2-9/32 1-3/4 3-31/32 2-7/8 1-3/ / SR 2x2x1/2 1/2 31/32 1/ /16 19/ /8 1-3/16 2-7/8 48 ADE I TE U.S.A. 4
6 SPRIKER EAD TEE etal Thread Insert Style Soc x Fipt x Soc Part umber Size Approx. Wt. (bs.) x1/2x1 13/16 11/16 1-3/ / / /16 3-7/ / /32 1-7/32.25 SPRIKER EAD TEE Special Reinforced Plastic Thread Style Soc x SR Fipt x Soc Part umber Size Approx Wt. (bs.) SR 1x1/2x1 27/32 3/4 1-3/ /32 1-5/8 1-13/16 3-7/ / /32 1-7/32.21 SPRIKER EAD TEE (Side Wall) Special Reinforced Plastic Thread Style SR Fipt x SR Fipt x Soc Part umber Size Approx Wt. (bs.) SR 1/2x1/2x3/4 1-3/32 19/ / /32 3-5/8 1-7/32 1-5/ SR 1/2x1/2x1 1 23/ / /32 3-7/16 1-3/16 1-5/ SPEARS AUFACTURI COPAY
7 90 E Soc x Soc Part umber Size Approx. Wt. (bs.) /4 17/ /32 1-5/ / / / /4 7/8 2-1/ /2 1-5/ / / / /32 2-7/ /2 1-5/8 3-7/16 3-7/ / /32 4-3/ REDUCI 90 E Soc x Soc Part umber Size Approx. Wt. (bs.) x3/4 21/32 13/16 1-3/4 1-25/ /32 1-9/32.11 SPRIKER EAD 90 E etal Thread Insert Style Soc x Fipt Part umber Size Approx. Wt. (bs.) /4x1/2 15/32 29/ /32 1-1/2 1-3/8 1-7/32.29 ADE I TE U.S.A. 6
8 SPRIKER EAD 90 E etal Thread Insert Style Soc x Fipt Part umber Size Approx. Wt. (bs.) x1/2 23/32 1-3/ / / /32 1-7/ x3/4 1/2 1-3/16 1-5/8 1-27/ / / /4x1/2 7/16 1-5/ / /32 2-1/16 1-7/32.35 SPRIKER EAD 90 E Special Reinforced Plastic Thread Style Soc x SR Fipt Part umber Size Approx. Wt. (bs.) SR 3/4x1/2 11/32 13/ /32 1-1/2 1-13/32 1-3/ SR 1x1/2 7/16 3/4 1-9/ / /32 1-3/ SR 1x3/4 1/2 7/8 1-5/8 1-9/ /32 1-3/ SR 1-1/4x1/2 13/32 1-1/ / /32 2-3/32 1-7/ STREET E Spig x Soc PIPE O.D. Part umber Size Approx. Wt. (bs.) /4 15/16 17/ / /32 1-3/ /32 23/ / /32 1-3/ SPEARS AUFACTURI COPAY
9 90 STREET E Spig x Soc PIPE O.D. Part umber Size Approx. Wt. (bs.) /4 1-9/16 27/ /16 2-3/32 2-3/ /2 1-15/32 1-3/ /32 2-9/ / /32 1-3/8 3-7/ / / /2 E Soc x Soc J Part umber Size J Approx. Wt. (bs.) /4 1-3/16 7/ / /8 9/ / /4 1-1/2 5/16 2-3/ /2 1-7/16 13/32 1-3/ E Soc x Soc J Part umber Size J Approx. Wt. (bs.) /4 1-5/16 5/ / /32 11/32 1-5/ /4 1-5/8 3/8 2-3/ /2 1-27/32 15/ / /8 21/32 2-7/8.48 ADE I TE U.S.A. 8
10 45 E Soc x Soc J Part umber Size J Approx. Wt. (bs.) /2 2-1/2 3/4 3-1/ /4 7/8 4-5/ CROSS Soc x Soc x Soc x Soc Part umber Size Approx. Wt. (bs.) /4 5/8 5/8 1-21/ /32 3-5/16 3-5/ / /4 3/4 1-5/8 1-5/8 3-1/4 3-1/4 1-11/ /4 1-1/8 1-1/8 2-3/8 2-3/8 4-3/4 4-3/4 2-3/ /2 1-7/32 1-7/32 2-5/8 2-5/8 5-1/4 5-1/4 2-11/ /2 1-1/ /2 1-23/ / / / / /16 3-1/ /16 2-1/ / /16 7-7/8 7-7/8 4-1/ REDUCI CROSS Soc x Soc x Soc x Soc Part umber Size Approx. Wt. (bs.) x1x3/4x3/4 7/8 21/ / /4 1-27/32 1-1/ /4x1-1/4x3/4x3/4 1-1/16 23/32 2-1/ /32 4-3/ /32 2-1/ / SPEARS AUFACTURI COPAY
11 SPRIKER EAD CROSS (Side Wall) Special Reinforced Plastic Thread Style Soc x Soc x SR Fipt x SR Fipt Part umber Size Approx. Wt. (bs.) SR 3/4x3/4x1/2x1/2 13/32 5/8 1-19/ /16 3-5/8 3-3/16 1-1/4 1-5/ SR 1x1x1/2x1/2 1-1/16 5/8 1-13/16 1-3/16 3-5/8 3-5/8 1-5/8 1-3/ SR 1x1x3/4x3/4 11/16 1-3/ / /16 3-5/8 3-5/8 1-5/8 1-3/8.25 COUPI Soc x Soc Part umber Size Approx. Wt. (bs.) /4 2-1/8 1-5/16 3/ /8 1-5/8 3/ /4 2-19/32 2 3/ /2 2-31/32 2-1/2 11/ /8 2-7/8 1/ /2 3-13/16 3-9/16 7/ /16 1/4.89 ADE I TE U.S.A. 10
12 REDUCER COUPI Soc x Soc 1 Part umber Size 1 Approx. Wt. (bs.) x3/4 2-3/8 1-23/ /32 7/ /4x3/4 2-19/32 2-3/32 1-5/8 11/ /4x1 2-11/16 2-3/ /32 5/ /2x3/4 2-13/ / /32 15/ /2x1 2-7/8 2-11/ /16 3/ /2x1-1/4 2-25/32 2-3/8 2-3/32 5/ x3/4 3-3/16 2-7/8 1-7/16 23/ x1 3-1/8 2-7/8 1-23/32 1/ x1-1/4 3-3/16 2-7/8 2-1/8 17/ x1-1/2 3-3/ / /32 9/ /2x1-1/2 3-23/ / /32 21/ /2x2 3-21/32 3-1/2 2-7/8 13/32.52 ROOVED COUPI ADAPTER roove x Soc PIPE OD 1 Part umber Size Approx. Wt. (bs.) /4 2-13/16 2-3/32 1-9/ /2 2-7/8 2-11/32 1-1/ / /32 1-9/ /2 3-3/8 3-1/2 1-21/ /16 4-5/ / SPEARS AUFACTURI COPAY
13 FEAE ADAPTER etal Thread Insert Style Soc x Fipt 1 Part umber Size 1 Approx. Wt. (bs.) / /32 1-3/8 5/ / / /32 15/ /4 2-3/8 2-3/32 2-1/16 13/ /2 2-9/16 2-3/8 2-7/16 7/ /16 2-7/8 3-1/32 15/32.31 FEAE ADAPTER & REDUCI FEAE ADAPTER Special Reinforced Plastic Thread Style Soc x SR Fipt 1 Part umber Size 1 Approx. Wt. (bs.) SR 3/4 1-13/32 1-3/8 7/32 1-7/ SR /16 1-3/4 5/32 2-5/ SR 1-1/4 2-1/8 2-1/16 3/16 2-5/ SR 3/4x1/2 1-13/32 1-7/32 7/ / SR 1x1/2 1-23/32 1-7/16 5/32 2-1/ SR 1x3/4 1-3/4 1-3/8 1/4 2-3/32.13 ADE I TE U.S.A. 12
14 SPIOT FEAE ADAPTER etal Thread Insert Style Spig x Fipt PIPE OD 1 Part umber Size 1 Approx. Wt. (bs.) /4 1-3/8 15/32 2-1/ /32 19/ /32.23 SPIOT FEAE ADAPTER Special Reinforced Plastic Thread Style Spig x SR Fipt PIPE OD 1 Part umber Size 1 Approx. Wt. (bs.) SR 3/4 1-15/16 1-3/8 11/ SR 1 2-1/4 1-23/32 13/32.13 FEAE SPRIKER EAD ADAPTER etal Thread Insert Style Soc x Fipt Part umber Size 1 Approx. Wt. (bs.) /4x1/2 1-15/16 1-7/16 1-7/32 3/ x1/2 2-7/ /32 1-7/32 9/ x3/4 2-3/ /16 1-3/8 7/ SPEARS AUFACTURI COPAY
15 FEAE SPRIKER EAD ADAPTER etal Thread Insert Style (ong Body) Soc x Fipt Part umber Size 1 Approx. Wt. (bs.) x1/ /32 1-7/32 7/32.17 FEAE SPRIKER EAD ADAPTER etal Thread Insert Style w/ Positioning Ring Soc x Fipt Part umber Size 1 Approx. Wt. (bs.) R /4x1/2 1-15/16 1-7/16 1-7/32 9/32.14 SPIOT SPRIKER EAD ADAPTER etal Thread Insert Style Spig x Fipt Pipe O.D. 1 Part umber Size 1 Approx. Wt. (bs.) /4x1/2 2-1/32 1-7/32 1/ x1/2 2-1/32 1-7/32 7/16.17 ADE I TE U.S.A. 14
16 SPIOT SPRIKER EAD ADAPTER Special Reinforced Plastic Thread Style Spig x SR Fipt Pipe O.D. 1 Part umber Size 1 Approx. Wt. (bs.) SR 3/4x1/2 1-29/32 1-7/32 1/ SR 1x1/2 2-1/32 1-7/ ADJUSTABE SPRIKER EAD ADAPTER etal Thread Insert Style Soc x Fipt Q Body Width Part umber Size in ax in ax Q Body Width Approx. Wt. (bs.) /4x1/2 5-1/32 6-1/4 3-7/ /32 1-5/16 2-1/ x1/ /4 3-11/ /32 1-5/16 2-1/8.42 ADJUSTABE SPRIKER EAD ADAPTER Special Reinforced Plastic Thread Style Soc x SR Fipt Q Body Width Part umber Size in ax in ax Q Body Width Approx. Wt. (bs.) 42001SR 3/4x1/2 5-1/32 6-5/ /32 4-5/8 1-5/16 2-1/ SR 1x1/2 5-1/32 6-5/16 3-7/32 4-1/2 1-5/16 2-1/ SPEARS AUFACTURI COPAY
17 ADJUSTABE SPRIKER EAD ADAPTER etal Thread Insert Style Spig x Fipt Q Pipe O.D. Body Width Part umber Size in ax in ax Q Body Width Approx. Wt. (bs.) /4x1/2 5-1/32 6-5/16 3-3/8 4-19/32 1-5/16 2-1/ x1/2 5-1/32 6-5/16 3-3/8 4-5/8 1-5/16 2-1/8.42 ADJUSTABE SPRIKER EAD ADAPTER Special Reinforced Plastic Thread Style Spig x SR Fipt Pipe O.D. Body Width Part umber Size in ax in ax Q Body Width Approx. Wt. (bs.) 42004SR 3/4x1/2 5-1/32 6-5/16 3-3/ /32 1-5/16 2-1/ SR 1x1/ /4 3-5/ /32 1-5/16 2-1/8.37 REDUCER BUSI Flush Style Spig x Soc PIPE O.D. Part umber Size Approx. Wt. (bs.) x3/4 1-13/32 13/ /4x3/4 1-19/32 17/ /4x1 1-23/32 1/ /2x3/4 1-11/16 11/ /2x1 1-23/32 19/32.15 ADE I TE U.S.A. 16
18 REDUCER BUSI Flush Style Spig x Soc PIPE O.D /2x1-1/4 1-3/4 1/ x3/4 1-29/32 29/ x1 1-29/32 25/ x1-1/4 1-3/4 1/ x1-1/2 1-3/4 3/ /2x1-1/4 2-13/32 1-3/ /2x1-1/2 2-13/32 1-1/ /2x2 2-9/32 13/ x2 2-1/4 3/ x2-1/2 2-5/16 1/4.40 CAP Soc W Part umber Size W Approx. Wt. (bs.) /4 1-3/8 1-13/ /32 1-9/ /4 2-7/32 1-7/ /2 2-11/32 2-1/ /32 2-5/ /2 3-17/ / / SPEARS AUFACTURI COPAY
19 TEST PU (ipt) (PVC White) ot U isted; For Pressure Testing Only Part umber Size Approx. Wt. (bs.) /2 27/32.02 FAE - OE PIECE (Soc) 4 Bolt oles, 150 psi R BOT CIRCE DIA. AX OD Part umber Size R Bolt Circle Dia. o. of Bolt oles Bolt Size in. Bolt ength ax. O.D. Approx. Wt. (bs.) /4 1-5/32 1-1/2 1/8 17/32 2-3/4 4 1/ / / /16 1/8 11/16 3-1/8 4 1/2 2-1/4 4-9/ /4 1-13/32 2-7/32 5/32 11/16 3-1/2 4 1/2 2-1/4 4-5/ /2 1-9/16 2-1/2 3/16 23/32 3-7/8 4 1/2 2-1/ / /32 7/8 4-3/4 4 5/ / /2 2-1/4 3-1/2 1/2 1-1/32 5-1/2 4 5/8 3-1/4 6-15/ /8 4-1/4 1/4 1-1/ /8 3-1/4 7-7/ is Van Stone style two piece design. ADE I TE U.S.A. 18
20 BID FAE 4 Bolt oles, 150 psi R BOT CIRCE DIA. AX OD Part umber Size R Bolt Circle Dia. o. of Bolt oles Bolt Size in. Bolt ength ax. O.D. Approx. Wt. (bs.) /4 17/32 2-3/4 4 1/ / /32 3-1/8 4 1/2 2-1/4 4-1/ /4 21/32 3-1/2 4 1/2 2-1/4 4-5/ /2 3/4 3-7/8 4 1/2 2-1/2 5-1/ /32 4-3/4 4 5/ / /2 1-1/32 5-1/2 4 5/8 3-1/4 6-15/ / /8 3-1/4 7-5/ FAE - TWO PIECE (Spig) Van Stone Style, 4 Bolt oles, 150 psi PIPE OD R Part umber Size R Bolt Circle Dia. BOT CIRCE DIA. AX OD o. of Bolt oles Bolt Size in. Bolt ength ax. O.D. Approx. Wt. (bs.) /4 1-15/16 13/16 17/32 2-3/4 4 1/ / /32 1-1/32 11/16 3-1/8 4 1/2 2-1/4 4-1/ /4 2-3/8 1 11/16 3-1/2 4 1/2 2-1/4 4-5/ /2 2-7/16 1-3/32 23/32 3-7/8 4 1/2 2-1/2 4-31/ /4 1-5/32 25/32 4-3/4 4 5/ / /2 3-1/16 1-9/32 1-1/32 5-1/2 4 5/8 3-1/4 6-15/ /8 1-13/32 1-1/ /8 3-1/4 7-9/ SPEARS AUFACTURI COPAY
21 UIO Soc x Soc UT OD Part umber Size ut O.D. Approx. Wt. (bs.) /4 2-3/8 1-17/32 3/8 2-1/ / /32 3/8 2-7/ /4 2-27/32 2-7/32 11/32 3-5/ /2 3-1/8 2-1/2 3/8 3-17/ /8 3-1/32 9/16 4-3/ TRASITIO UIO w/ etal Thread Insert Soc x Fipt UT OD Part umber Size ut O.D. Approx. Wt. (bs.) BR 1 2-7/8 1-27/ / BR 1-1/ /16 1-1/8 3-9/ BR 1-1/2 3-3/4 2-1/2 1-9/ / BR 2 4-3/16 3-1/ /32 4-3/ ADE I TE U.S.A. 20
22 SOCKET DIESIOS SC 40 - AST F438 SC 80 - AST F439 Size Socket Entrance A Socket Bottom B Tolerance SC 40 inimum Socket ength C SC 80 inimum Socket ength C 3/ ± ± / ± / ± ± / ± ± SPEARS AUFACTURI COPAY
23 OTES
24 SPEARS AUFACTURI COPAY CORPORATE OFFICE Olden St., Sylmar, CA PO Box 9203, Sylmar, CA (818) Copright 2004 Spears anufacturing Company. All Rights Reserved. Printed in the United States of America 06/04. F
FlameGuard TECHNICAL INFORMATION WEIGHTS & DIMENSIONS. January 1, 2007 SUPERSEDES ALL PREVIOUS EDITIONS CPVC FIRE SPRINKLER PIPING PRODUCTS FG
FlameGuard CPVC FIRE SPRIKER PIPIG PRODUCTS TECICA IFORATIO WEIGTS & DIESIOS January 1, 2007 SUPERSEDES A PREVIOUS EDITIOS Visit our web site: www.spearsmfg.com FG-4-0107 FlameGuard CPVC FIRE SPRIKER PIPIG
More informationSee Plastic Pipe Engineering Guide for additional information
Schedule 40 PVC Pipe Dimensions & Pressure Ratings Schedule 40 Pipe om. Pipe Size (in) O.D. Average I.D. in. Wall ominal Wt./Ft. aximum W.P. PSI* 1/8 0.405 0.249 0.068 0.051 810 1/4 0.540 0.344 0.088 0.086
More informationCPVC CTS FITTINGS & VALVES COPPER-TUBE SIZE
CPVC CTS FITTIS & VAVES COPPER-TUBE SIZE TECICA IFORATIO WEITS & DIESIOS August 1, 2011 SUPERSEDES A PREVIOUS EDITIOS Visit our web site www.spearsmfg.com CTS-4-0811 Additional Technical Publications TEROPASTIC
More informationDuct Technical Information TECHNICAL INFORMATION & DIMENSIONS
TECNICA INFORATION & DIENSIONS Contact Spears for any Information not found. Due to aterial Cost Variations, Prices Subject to Change. Check On-line Catalog @ www.spearsmfg.com Page 236 Fume & Air Duct
More informationQuality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
More informationCPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846
CPVC Transition Fittings - Female Adapter STD4703BTLF12 1/2 CPVC X 1/2 FIP 25 250 CPVC Transition Fittings - Female Adapter STD4703BTLF34 3/4 CPVC X 3/4 FIP 25 250 CPVC Transition Fittings - Female Adapter
More informationEffective Date: December 2017 Void After: December 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationCopper Tube Size (CTS) Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Copper Tube Size (CTS) Technical Information TECHICA IFORATIO WEIGHTS & DIESIOS Contact Spears for any Information not found. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed
More informationinstallation best practices pocket guide
installation best practices pocket guide Congratulations on choosing BlazeMaster Fire Sprinkler Systems Congratulations on choosing BlazeMaster Fire Sprinkler Systems, the world s most specified nonmetallic
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationBlazeMaster Fire Protection Fittings Standard
BlazeMaster Fire Protection Fittings Standard ADAPTERs 5001-G Grooved Coupling Adapters (G x S) Univ. Nom. approx. DIM. A DIM. B DIM. C JOINT FIG. NO. SIZE NET WT./LBS. inches inches inches 5001-G 1-1/4"
More informationMUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5
operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions
More informationIAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
More informationINSERT PRESSURE FITTINGS PRODUCTS PRICE LIST PRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS
PRICE GROUP DESCRIPTION 05 PVC INSERT FITTINGS DISCOUNT MULTIPLIER Phone: (315) 451-1100 or (800) 776-2266 Fax: (800) 729-3299 7652 Morgan Road Liverpool, New York 13090 PRODUCTS INSERT PRESSURE FITTINGS
More information10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095
10 DRIP NOZZLE WATERING DRIP KIT Model 93261 / Model ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission
More informationCOMBINATION AIR RELEASE DEGASSING (CARD) VALVES INSTALLATION AND MAINTENANCE MANUAL
COMBINATION AIR RELEASE DEGASSING (CARD) VALVES INSTALLATION AND MAINTENANCE MANUAL SPECIFICATIONS: The CARD series air valves are available in 3 pipe sizes, 1, 2 and 4 NPT or socket. Maximum inlet pressure
More informationSpeed control assembly model A-1
Pressure Regulation 533a 1. DESCRIPTION The Viking Speed Control Assembly provides adjustment of the opening speed of Viking Deluge Valves, and adjustment of both the opening and closing speed of Viking
More informationHAYWARD FLOW CONTROL FLV SERIES, PVC/CPVC FILTER VESSEL INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
HAYWARD FLOW CONTROL FLV SERIES, PVC/CPVC FILTER VESSEL INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Pg. 1of 15 PLEASE READ THE FOLLOWING INFORMATION PRIOR TO INSTALLING AND USING ANY HAYWARD PRODUCT.
More informationHardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
More informationMUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationMUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
More informationMUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationpvc well casing & drop pipe
C e r t a i nte e d pvc well casing & drop pipe P V C We l l P r o d u c t s Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due
More informationPIPE, VALVE & FITTING
1. 2. 3. 4. Steel Pipe 1.1. Sch. 40 Black T&C 1.2. Sch. 40 Black PE 1.3. Sch. 80 Black PE 1.4. Sch. 40 Galvanized PE Threaded Steel Fittings 2.1. Sch. 40 Black Fittings 2.2. Sch. 80 Black Fittings 2.3.
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More information1 DRIVE INDUSTRIAL IMPACT WRENCH
1 DRIVE INDUSTRIAL IMPACT WRENCH 92622 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight
More informationInstallation/Care/Use Manual Soft Sides Fountains with FLEXI-GUARD
Installation/Care/Use Manual Soft Sides Fountains with FLEXI-GUARD EDFP217C EDFP217RAC Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING
More informationVOLUMATIC WATER REGULATOR
Introduction The Chore-Time VOLUMATIC regulator is designed to regulate water pressure for Chore-Time Layer and Brood Grow Nipple Watering Systems. There is a model for manual adjustment of the regulator
More informationHP-104 & HP-106 Tapping Machine OPERATIONS MANUAL
30230 Los Alamos Rd. Murrieta, CA 92563 800-279-5659 FAX 951-926-2334 TappingMachines.com HP-104 & HP-106 Tapping Machine OPERATIONS MANUAL & OPERATING INSTRUCTIONS WARNING READ: Before using this product,
More information6146XX-X OPEN STYLE HOSE REELS
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 6146XX-XXX OPEN STYLE HOSE REELS LOW, MEDIUM & HIGH PRESSURE (FOR AIR, WATER & PETROLEUM PRODUCTS) 6146XX-X RELEASED: 2-5-90 REVISED:
More informationHAYWARD FLOW CONTROL Series PBV Back Pressure Valve and Series RPV Pressure Relief Valve INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS
HAYWARD FLOW CONTROL Series PBV Back Pressure Valve and Series RPV Pressure Relief Valve INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS Page 1 of 20 Page 2 of 20 TABLE OF CONTENTS Safety Warnings
More informationPANACEA P200 STAINLESS STEEL USER MANUAL
Basic Features Stainless Steel body with 1.75 outside diameter. Will fit into wells down to 2 (schedule 80). Has an internal chamber volume of 200mL. Maximum depth below ground surface of 3000ft. Other
More informationWafer Check Valve. Contents. User s Manual. (1) Be sure to read the following description of our product warranty 1
Serial No. H-V066-E-3 Wafer Check Valve User s Manual Contents (1) Be sure to read the following description of our product warranty 1 (2) General operating instructions 2 (3) General instructions for
More informationOperating Procedures for GripTight 15.5 SDR & IPS Test Plugs
EST Group DC2518 08/01 REV 3 12/12 Page 1 of 6 Operating Procedures for GripTight SDR & IPS Test Plugs WARNING For proper operation, GripTight plugs must be assembled as shown in Figure 1. Pressure testing
More informationCB7 Bayonets Male & Female 1/4", 3/8, & 1/2 Size
12501 Telecom Drive, Tampa, FL 33637 Ph: (813) 978-1000 Fax: (813) 977-3329 www.cpc-cryolab.com INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS 17/3.5.6 Rev. 0 CB7 Bayonets Male & Female 1/4", 3/8,
More information4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
More informationMedical Gas Solutions
WHN YOU ND from OKRING okring Technology, C offers a patented, permanent, axially swaged tube fitting. This technology for medical gas applications has been approved by NFP 99-005 (Paragraph 5..0.7 (4)).
More informationAnti-flood device Model B-1
December 4, 2009 Dry Systems 123a 1. DESCRIPTION The Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET
More informationPANACEA P125 USER MANUAL
Basic Features Stainless steel body with 1.125 outside diameter. Will fit into wells down to 1-1/4 (schedule 80). Uses static water pressure to fill gas and sample return tubes. Maximum depth below ground
More informationBooster Pump PB4-60 Replacement Kits
Booster Pump PB4-60 Replacement Kits FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product
More informationprecision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com Sales-hoke@circor.com
More informationInstruction Manual. PE-25/32/37 Tapping Machines. POLYTAPP Valves
Instruction Manual PE-25/32/37 Tapping Machines & POLYTAPP Valves Nov 2016, Revision 2 Document Number 3000111 2 M.T. Deason Company, Inc. PO Box 101807 Birmingham, AL 35210 Phone: 205 956 2266 Fax: 205
More information1700ESL Kamvalok Coupler
PART #H32138PA November 2008 1700ESL Kamvalok Coupler OPW Transport Series Dry Disconnect Couplings are considered the standard of the industry. For use on multi-compartment petroleum, solvent and chemical
More informationPreparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable
GEP-6075 Rev. B 101574 Ref. I.D.: 16973 Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND THESE
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationZIPP VUMAQUAD INSTALLATION INSTRUCTIONS
ZIPP VUMAQUAD INSTALLATION INSTRUCTIONS CAUTION All Zipp Crank and BB products should be installed by a professional bicycle mechanic using the appropriate tools. Zipp assumes no responsibility for damages
More informationTECHNICAL DATA ANTI-FLOOD DEVICE MODEL B-1 1. DESCRIPTION
Page 1 of 6 1. DESCRIPTION The Model B-1 Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET condition,
More informationFLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
More informationInstallation Instructions For Flat Seated Bolted Type RAH Series Disk Holders
Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders RA Series Rupture Disks 1. WARNING a) Read the complete instructions before attempting to install the rupture disk and holder
More informationPVC Electrical Fittings & Accessories Price List
PVC Electrical Fittings & Accessories Price List Effective August 26, 2002 Electrical Products PVC Electrical Fittings & Accessories Price List PVC Electrical Standards 2 Schedule 40 Fittings: Couplings,
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More informationTESCOM 50-4X Series Safety, Installation & Start-Up Procedures
Operations & Service Manual TESCOM 50-4X Series Safety, Installation & Start-Up Procedures Do not attempt to select, install, use or maintain this product until you have read and fully understood this
More informationPRS(TC)4,8 USER MANUAL. Read the complete manual before installing and using the regulator.
PRS(TC)4,8 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationDuoSafe. DuoSafe Inch Systems. Larger sizes on request
pvc-u and pvc-c DuoSafe DuoSafe systems are manufactured from rigid PVC-U or rigid PVC-C, with containment pipe options including grey or clear PVC-U, PVC-C, ABS or Polyethylene. They are ideal for above
More informationSelf Control Valves. User s Manual. Pressure Reducing Type (V182,V82) Pressure Relief Type (V185) Pressure Retaining Type (V186)
Serial No. H-V063-E-9 Self Control Valves Pressure Reducing Type (V182,V82) Pressure Relief Type (V185) Pressure Retaining Type (V186) Contents 1. Be sure to read the following warranty clauses of our
More informationCOMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationPressure Relief Valve DHV 718
Advantages frictionless components low maintenance low pressure increase up to fully opened valve constant low vibration controlling hermetically sealed by diaphragm for oscillating pumps for viscous media
More informationFLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
More information3" UC Ultra-Chuck Durable Lightweight Air Inflated Bladder Chuck Operation/Repair Manual. (76.2 mm) DOUBLE E COMPANY, INC.
3" UC-3000 (76.2 mm) Ultra-Chuck Durable Lightweight Air Inflated Bladder Chuck Operation/Repair Manual DOUBLE E COMPANY, INC. 319 Manley Street, West Bridgewater, MA 02379 U.S.A. Tel: (508) 588-8099 /
More informationCompact Ball Valves ASAHI AV VALVES. Contents. User s Manual. (Page) (1) Be sure to read the following warranty clauses of our product 1
Serial No. H-V030-E-5 Compact Ball Valves User s Manual Contents (Page) (1) Be sure to read the following warranty clauses of our product 1 (2) General operating instructions 2 (3) General instructions
More informationMODELS (2 foot Version) (4 foot Version)
INSTALLATION AND MAINTENANCE MANUAL DUROSITE LED LINEAR FIXTURE Document No: 9100-127-2571-99 Rev A April, 2016 MODELS (2 foot Version) (4 foot Version) ALL LAE ALL LBE These instructions contain important
More informationPipe Thread Connection 1/2 inch NPT. Friction Loss Refer to Figure 3
Worldwide Contacts www.tyco-fire.com Model B-1 Pipe Line Strainer General Description The Model B-1 Pipe Line Strainers (Ref. Figures 1 and 2) are designed for installation in the water supply connection
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationBERMAD Irrigation. IR-100 hyflow Basic Valve. Basic Valve.
Basic Valve IR- Yflow Basic Valve Te BERMAD basic Model IR- Yflow diapragm actuated, ydraulically operated valve is at te leading edge of control valve design. It combines simple and reliable construction
More informationDT400/436 Tee Connector Installation Instructions
Connectors Lorem ipsum and dolor Splices sit Amat Effective September 2014 Supersedes IS550-30-1 March 2011 MN650001EN DT400/436 Tee Connector Installation Instructions DISCLAIMER OF WARRANTIES AND LIMITATION
More informationPRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS PRODUCTS PRICE LIST PVC INSERT PRESSURE FITTINGS
PRICE GROUP DESCRIPTION 05 PVC INSERT FITTINGS DISCOUNT MULTIPLIER PRODUCTS PVC INSERT PRESSURE FITTINGS PVC INSERT FITTINGS RECOMMENDED INSTALLATION RECOMMENDED INSTALLATION PROCEDURES INSERT (BARBED)
More informationAppendix B. Editor. Ted W. van der Gulik, P.Eng. Senior Engineer. Authors. Stephanie Tam, P.Eng. Water Management Engineer
B.C. SPRINKLER IRRIGATION MANUAL Appendix B Editor Ted W. van der Gulik, P.Eng. Senior Engineer Authors Stephanie Tam, P.Eng. Water Management Engineer Andrew Petersen, P.Ag. Regional Resource Specialist
More informationOPERATIONS CHALLENGE 2017
OPERATIONS CHALLENGE 2017 COLLECTION SYSTEM EVENT During the event, your team will complete the following: The event simulates connecting a 4-inch PVC lateral sewer to an existing 8-inch PVC sewer pipe
More informationKENNEDY VALVE RESILIENT WEDGE GATE VALVE MAINTENANCE MANUAL
KENNEDY VALVE Division of McWane, Inc. 1021 East Water Street P.O. Box 931 Elmira, New York 14902-0931 Telephone (607) 734-2211 Fax (607) 734-1003 KENNEDY VALVE RESILIENT WEDGE GATE VALVE MAINTENANCE MANUAL
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More information(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type
These are air finger models featuring light weight and miniature size. Blank fingers are available for the K type fingers as option. R-guide leaves no possibility of misalignment. The blank finger can
More informationCOMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK
More informationEnd Connection. Thread x Thread N/A N/A N/A N/A Flange x Flange N/A
Worldwide Contacts www.tyco-fire.com Model RV-1 Pressure Relief Valve, Pilot-Operated, Globe and Angle Body Styles General Description Valves, through inch (DN50 through DN00), are factory assembled and
More informationUniversal Elevator Mount Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI U.S.A.
REQUIRED TOOLS AND MATERIALS: 2 Capable Adults Carpenter s Level 15 Tape Measure Pencil Universal Elevator Mount Owners Manual Customer Service Center N53 W2400 South Corporate Circle Sussex, WI 530 U.S.A.
More information-Proline Polypropylene Single Wall Piping
EFFECTIVE: 6/01/11 Industrial Piping Systems Dimensional Guide #PDIM Proline Super Proline Single Chemical Wall Grade Piping PVDF System -Proline Single Wall Piping s 3 r z s www.asahi-america.com Dimensions
More information1/4 Air Ratchet Wrench
/4 Air Ratchet Wrench 92849 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All
More informationCompression Fittings
Advantages o flaring, soldering or other preparation of tubing necessary to assemble. This economical fitting is readily available in a broad selection of styles. anufactured from CA 360, CA 35 or CA 377
More informationINSERT FITTINGS INSERT FITTINGS
Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4
More informationEPOXY FITTINGS DIMENSIONS
Bulletin No. A150 May 1, 2004 EPOXY FITTINGS DIMENSIONS 2"-16" GREEN THREAD fittings may be used with GREEN THREAD and RED THREAD II piping. Refer to Chemical Resistance Guide, Bulletin No. E5615, for
More informationOperation Manual Guillotine Cutter RC-5
Operation Manual Guillotine Cutter RC-5 Technical Specifications General Safety/Operating Instructions Using the Guillotine Cutter/Crimper Blade Change Instructions Maintenance Instructions This is a detailed
More informationSteel Spring Driven Reel Instruction Manual
Steel Spring Driven Reel Instruction Manual WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in
More informationCOOPER POWER SERIES. 600 A 15, 25 and 35 kv class bushing adapter installation instructions. Deadbreak Apparatus Connectors MN650058EN
Deadbreak Apparatus Connectors MN650058EN Effective May 2017 Supersedes July 2009 (S600-59-1) 600 A 15, 25 and 35 kv class bushing adapter installation instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES
More informationLUDLUM MODEL 239-1F FLOOR MONITOR. Revised December 2010
LUDLUM MODEL 239-1F FLOOR MONITOR Revised LUDLUM MEASUREMENTS, INC. 501 OAK ST., P.O. BOX 810 SWEETWATER, TX 79556 325/235-5494 FAX: 325/235-4672 STATEMENT OF WARRANTY Ludlum Measurements, Inc. warrants
More informationROCKSOLID SINGLE POST ANCHOR
ROCKSOLID SINGLE POST ANCHOR INSTALLATION INSTRUCTIONS YOU MUST USE THE ANCHOR SET TOOL (PART #27-109) TO INSURE PROPER INSTALLATION SRS AUSTRALIA, PTY LTD 12 Enterprise St Richlands QLD 4077 Australia
More informationDBML-60/80 Squeeze Tool
DBML-60/80 Squeeze Tool OPERATORS MANUAL Description The Mustang Model DBML-60/80 Hydraulic squeeze tool has been manufactured since 1995. A Mustang 3 3/4 bore doubleacting cylinder producing 41,000 lbs
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationVOLUMATIC WATER REGULATOR
VOLUMATIC WATER REGULATOR For Cage Systems - PDS and Manual Adjustment Part Number 00-, 00-, 00- Introduction The Chore-Time VOLUMATIC Water Regulator is designed to regulate the water pressure for the
More informationCompact Triple Cabinet Outlet Station Model Installation and Operating Instructions
Compact Triple Cabinet Outlet Station Model 6258-1 Installation and Operating Instructions The Porter Compact Triple Outlet Station (6258-1) provides a quick, safe, and reliable method of connection to
More informationUSM21 Sealed Bimetallic Steam Trap for use with Pipeline Connectors Installation and Maintenance Instructions
6250250/1 IM-P625-03 ST Issue 1 USM21 Sealed Bimetallic Steam Trap for use with Pipeline Connectors Installation and Maintenance Instructions 1. General safety information 2. General product information
More informationCautions : 1. The gauge orientation on the GPU and GPM types can be changed by using
The compact-size pressure gauge can be installed in small spaces. With the built-in tube fitting type, tube connection is the only necessary step before pressure indication. Fluid medium Indicated pressure
More informationS Surge Arresters
Surge Arresters UltraSIL Polymer-Housed VariSTAR Type US, UH, and UX Station-Class Surge Arresters Installation and Maintenance Instructions Service Information S235-88-1 Contents Product Information...........................1
More informationE 094 E 103 E 143 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 135 l/min / 35.7 gpm
Return Filters E 9 E E Tank top mounting Connection up to G / -6 SAE Nominal flow rate up to 5 l/min / 5.7 gpm Description Application In the return line circuits of hydraulic systems. Performance features
More informationGas Lines. Technical Manual. Sumitomo (SHI) Cryogenics of America, Inc Vultee Street Allentown, PA U.S.A.
Gas Lines Technical Manual Sumitomo (SHI) Cryogenics of America, Inc. 1833 Vultee Street Allentown, PA 18103-4783 U.S.A. Revision F: April 2008 261320A TABLE OF CONTENTS Page DESCRIPTION...1 SPECIFICATIONS...2
More informationApollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual
I854000.D Apollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual Introduction This manual presents guidelines for the Installation, Operation and
More informationInstallation Instructions and valve Maintenance Rev. 0 of 21/09/15
ASSEMBLING PROCEDURE AND VALVE MAINTENANCE 1.0.... Safety Information 2.0.. INTRODUCTION 3.0 VARIATIONS 4.0..ASSEMBLING PROCEDURE FOR THE STEM 5.0 ASSEMBLING PROCEDURE FOR OUTLET CONNECTIONS 6.0 PROCEDURE
More information310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment
OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility
More informationNHR Powder Feed Hopper
Instruction Sheet P/N 0804A0 NHR-8-50 Powder Feed Hopper Description This instruction sheet provides specifications, installation and operation instructions, and parts lists for the NHR-8-50 powder feed
More informationTECHNICAL DATA. Table 1 - Specifications
Page 1 of 6 1. DESCRIPTION Model A-3 Pilot Operated Pressure Control Valves are factory assembled units. Each unit consists of a Model H-2 Halar coated Flow Control Valve, a Speed Control Valve, a Model
More informationWEATHERIZING INSTRUCTIONS
FOR PNEUMATIC MASTS The Will-Burt Company 169 S. Main Street Orrville, OH 44667 www.willburt.com TP-4744301-C, 2017 The Will-Burt Company Pneumatic Mast Warranty Will-Burt warrants its pneumatic masts
More information