CLASS # 21 PINS AND LOADS

Transcription

1 CLASS # 21 PINS AND LOADS These are heavy duty, low velocity fasteners, also called pins. They are special nails used in Powder Actuated Guns. They are propelled by Loads also called Shot which, simply put, works like a bullet in a gun. The firing pin strikes the gun powder filled load which then propels the Pin through the gun. Pins and Loads, or Nail and Shot, are used for fastening hard materials where manual hammering would just not work. Used for fastening wood to concrete or wood to steel or steel to concrete etc. All the pins are Zinc plated and have the standard.300 head. They will fit almost all nail guns. The pins are available in various lengths and with or without an attached washer. The loads are available in.22 or.27 caliber and in different power levels. Gray being the lightest power, then Brown for light power, Green for heavy power, and Red for heavy power in a.27 Caliber. WITHOUT WASHER PINS WITH 3/4 WASHER SIZE: QTY: P101 3/4 LOW VELOCITY PINS - NO WASHER 100 P102 1 LOW VELOCITY PINS - NO WASHER 100 P /2 LOW VELOCITY PINS - NO WASHER 100 P105 2 LOW VELOCITY PINS - NO WASHER 100 P /2 LOW VELOCITY PINS - NO WASHER 100 P104 3 LOW VELOCITY PINS - NO WASHER 100 P150 3/4 LOW VELOCITY PINS - WITH WASHER 100 P151 1 LOW VELOCITY PINS - WITH WASHER 100 P /2 LOW VELOCITY PINS - WITH WASHER 100 P153 2 LOW VELOCITY PINS - WITH WASHER 100 P /2 LOW VELOCITY PINS - WITH WASHER 100 P155 3 LOW VELOCITY PINS - WITH WASHER 100

2 The loads are manufactured by Winchester, (the firearms company), for Masterset. They are available in.22 caliber single shot crimped and come in three power levels, or in the.27 caliber crimped strip loads, (10 loads per strip), in four power levels. The single shot loads are packed 100 per box and the strip loads are 10 loads per strip, 10 strips per box for a total of 100 loads. LOADS CRIMPED LOADS CAL. COLOR: QTY: PRICE: S BROWN CRIMPED LOADS S GREEN CRIMPED LOADS S YELLOW CRIMPED LOADS S BROWN CRIMPED LOADS - STRIP 10 x S GREEN CRIMPED LOADS - STRIP 10 x S YELLOW CRIMPED LOADS - STRIP 10 x S RED CRIMPED LOADS - STRIP 10 x SHOT STRIP LOADS

3 CLASS # 21 POWDER ACTUATED GUNS These are the Masterset brand powder actuated guns. The unique thing about the Masterset system is that the guns are of the component type, which means faster turn around when servicing and trading up is less expensive. The firing pin mechanism is interchangeable with either gun, which is an exclusive feature of Masterset. Both guns take.300 head fasteners and the.27 caliber will accept the 8mm Hilti fasteners. Both guns have a tough, but lightweight, Zytel handle which is almost indestructible yet absorbs recoil, and reduces operator fatigue. System 1 is a.27 caliber, single shot gun that will handle four different powder levels, brown through red and System 2 is a.22 caliber single shot that will handle four different powder levels, gray through yellow. Both kits come in a heavy duty metal tool box with handle, lift out tray and include ear plugs, safety goggles, hex wrenches, cleaning solvent, spall suppressors, gleaning brushes, and a wire cleaning brush. USA MADE SYS1 SYS2.27 CAL. MASTERSET FASTENING TOOL KIT.22 CAL. MASTERSET FASTENING TOOL KIT

4 CLASS # 23 NYLON CABLE TIES Industrial quality cable ties with a thousand and one uses. For use in automotive, home, commercial, HVAC, and agricultural applications. These ties are used for electrical wires, stereo systems, security systems, telephone lines, computer cables, shrubbery, bundling, etc. They are a one piece molded nylon, and self-locking. The white cable ties are normally used indoors, and the black ties are UV protected for uses outdoors. All cable ties are UL listed. TENSILE STRENGTH: 4 18 Lbs Lbs Lbs Lbs Lbs Lbs Lbs Lbs Lbs. W HIITE NYLON CABLE TIIESS BLACK NYLON CABLE TIIESS SIZE: QTY: 7WT WT 4 1,000 5WT 5 1,000 7WT 7 1,000 11WT WT WT WT WT WT SIZE: QTY: 7BT BT 4 1,000 5BT 5 1,000 7BT 7 1,000 11BT BT BT BT BT BT 48 50

5 CLASS # 23 HEAVY DUTY CABLE TIES Standard cable ties, even the best ones, are usually only 50 lbs. of tensile strength. These heavy duty cable ties, out of our industrial division, are more than twice that. They are 120 lbs tensile strength and are noticeably wider at 8mm, instead of 5mm like the regular ones. These cable ties are commonly used by big commercial contractors and big government contracts and usually sold in quantities of 10,000 however, we carry them in smaller packs for commercial use and they are available in 8, 11, and 14 in both black and white. Sold in packs of 100. USA MADE HD8WT HD11WT HD14WT HD8BT HD11BT HD14BT 8 x 8 mm 120 LB. WHITE TIES - (100 PACK) 11 x 8 mm 120 LB. WHITE TIES - (100 PACK) 14 x 8 mm 120 LB. WHITE TIES - (100 PACK) 8 x 8 mm 120 LB. BLACK TIES - (100 PACK) 11 x 8 mm 120 LB. BLACK TIES - (100 PACK) 14 x 8 mm 120 LB. BLACK TIES - (100 PACK)

6 CLASS # 23 CABLE TIE MOUNTING PADS These are the 3/4 or 1 square adhesive mounts that make managing of wire, cable and hose a snap! Made by Catamount, a division of Thomas and Betts, they re the World s leading manufacturer of cable tie products and wire management. These handy adhesive mounts will stick instantly to almost any type of surface, or can be screwed down through the double screw holes provided on the mounting pad. The installer can quickly bundle the material, then pass the cable tie through the double slotted mount, and fasten the bundle securely at the desired height. They can be used for any length cable tie up to 14 (18 to 50 lbs tensile strength). They come packed 100 or 500 per bag and are available in natural (white) nylon. MP34 3/4 CABLE TIE MOUNTING PADS - (500) MP1 1 CABLE TIE MOUNTING PADS - (100)

7 CLASS # 23 PLENUM CABLE TIES These cable ties meet NEC regulations for bundling qualified conduit in plenum rated (air handling spaces) as described in NFPA National Electrical Code section Plenum environments are areas through which air handling mechanisms (ducts, vents) are routed, for example, the area between a drop-in ceiling and the real ceiling. These areas have very special requirements because any non -metallic component in these air spaces will fuel a fire. These ties are tested for the amount of smoke and heat generated during a fire per UL They also meet UL 94V-O flammability rating; however they are not rated for interior duct use. These UL listed ties are rated in plenums as defined in the NEC , sections C & D only. This excludes ducts or plenums used for environmental air, dust, or vapor removal. They are color coded red or white. USA MADE UL APPROVED. Specifications: WIDE / 50 LB. TENSILE STRENGTH / 1.75 MAX BUNDLE WIDE / 50 LB. TENSILE STRENGTH / 3.00 MAX BUNDLE WIDE / 50 LB. TENSILE STRENGTH / 4.00 MAX BUNDLE TYRAP7100 TYRAP7 TYRAP11 WTYRAP7 WTYRAP11 WTYRAP14 7 RED PLENUM TY-RAPS - (100 PK) 7 RED PLENUM TY-RAPS - (1,000 PK) 11 RED PLENUM TY-RAPS - (1,000 PK) 7 WHITE PLENUM TY-RAPS - (1,000 PK) 11 WHITE PLENUM TY-RAPS - (1,000 PK) 14 WHITE PLENUM TY-RAPS - (1,000 PK)

8 CLASS # 23 SCREW MOUNT CABLE TIES Screw mount cable ties have the added feature of a thick, molded loop on the binding end that will accommodate a screw to fasten wire (or a bundle of wire) to the wall at any height. The 7 1/2 are available in black or white and the 11 in white only They are constructed of tough nylon with a tensile strength of 50 Lbs. and are UV protected ties that can be used indoors or outdoors. USA MADE Specifications: Max. Bundle: 1 3/ Max. Bundle: 3 Temperature rating: 221 F / 105 C SM7BT SM7WT SM11WT 7 1/2 BLACK SCREW MOUNT TIES - (1,000 PK) 7 1/2 WHITE SCREW MOUNT TIES - (1,000 PK) 11 WHITE SCREW MOUNT TIES - (500 PK)

9 CLASS # 23 CATAMOUNT CABLE TIE GUN The Cat-Pak light duty cable tie tool by Catamount, is the quick and easy installation tool for fastening 18 to 50Lb. tensile strength cable ties. If you re working with electrical wiring, cable, hoses, or just securing tarps, this cable tie gun is a must. Just fasten the cable tie around the material to be bundled, insert the end into the gun barrel, and pull the trigger to tighten. To remove any excess tie, just twist the gun from left to right and the end will be cut cleanly, so there is no tag end to scratch your hands, arms, or anything else. CTGUN CATAMOUNT CABLE TIE GUN

10 CLASS # DUCT STRAPS These are the genuine Thomas & Betts brand, 36 nylon duct straps for the HVAC Industry. These straps exceed the highest tensile strengths of 175 Lbs. and can be used in as low as -40 F to as high as 185 F. They also have a UL 94 V-2 vertical flammability rating. With these 36 cable ties you can secure a 2.75 bundle/duct up to which covers most HVAC Installations. These are the most popular size duct straps in the industry and Thomas & Betts has been voted the #1 brand of choice. USA MADE QTY. 36WDS 36 WHITE HVAC DUCT STRAPS 50 36BDS 36 BLACK HVAC DUCT STRAPS 50

11 CLASS # 23 THIN WALL HEAT SHRINK KITS These are the Shrink-Kon thin wall insulation kits. They are heat shrink tubes in various colors and diameters that are great for identification and adding a professional finishing touch on wire termination projects. The colored kit contains over 43 (86 pieces) of polyolefin thin wall heat shrink in red, white, blue, yellow, green, black and clear in 6 sections each. They range in diameters of 3/16, 1/4, 3/8, 1/2, 3/4, and 1 and they have a 2:1 shrink ratio. The original black version contains over 37 (74 pieces) of heat shrink in the same diameters as the colored kit but in black only. Both kits are UL recognized and CSA approved and come in a convenient resealable storage box. CHS-KIT HS-KIT 86 PC. COLORED HEAT SHRINK KIT 74 PC. BLACK HEAT SHRINK KIT

12 CLASS # PC. COLORED CABLE TIES W/ CUTTER This is a big tube of various sizes and colors of cable ties. You ll always have the right colors and sizes to fill in any job. You get 650 total pieces of red, green, blue, black, and yellow in 4, 6, and 8 lengths. You also get 50 pieces of 12 white ties. There are 400 total of the 4 ties, 100 total of 6, 100 total 8, and 50 of the 12. They also come with a cable tie cutter to snip loose ends and make each job neat and organized. IMPORTED 650PC 650 PC. COLORED CABLE TIES W/ CUTTER

13 CLASS # 23 WRAP STRAPS Cable wraps, or wrapping straps, are like having a strip of double sided Velcro that you can cut to any length. They re available in two widths; 1/2 and 3/4 and they are 75 feet long. Just cut the strap to the desired length and wrap it around any size grouping of wire, cables, etc. These ties can be used over and over, up to 200 times just like standard Velcro, so you won t have a bunch of cut cable ties laying around, and you won t buy nearly as many, because Wrap Strap cuts the waste. Available in black only and in flame retardant 1/2 straps for plenum rated areas. USA MADE SIZE: VEL1275 1/2 x 75 VELCRO WRAP STRAP VEL1275FR 1/2 x 75 VELCRO WRAP STRAP-PLENUM VEL3475 3/4 x 75 VELCRO WRAP STRAP

14 QUICK COUPLERS These are the Amflo quick release, top quality US made couplers. They have the standard 1/4 NPT threads and will fit all 3/8 air hoses and 3/8 air tools. The most typical application is the C20, female coupler, and the male plug, CP21. AMERICAN MADE C20 - FEMALE COUPLER CP21 - MALE PLUG CP20 - FEMALE PLUG C21 - MALE COUPLER C20 C21 CP20 CP21 AMFLO KWIK CHANGE FEMALE COUPLER AMFLO KWIK CHANGE MALE COUPLER AMFLO KWIK CHANGE FEMALE PLUG AMFLO KWIK CHANGE MALE PLUG

15 TIRE INFLATOR WITH GAUGE These tire inflating tools are for professional and home use with all direct air lines and any type of tube air filler. They have standard 1/4 female NPT fittings for your 1/4 and 3/8 air hoses. The attached pressure gauge measures from 10 to 220 lbs. of pressure in 2 lb increments and it has a weatherproof heavy plastic body with an easy to read dial. Built in air release mechanism allows for optimal pressure control. It has a chrome plated steel dual chuck with an extension cap that fits all rim cover holes; and a 12 flexible hose. IMPORTED. 30TIG2 AIR TIRE INFLATOR WITH GAUGE

16 1/4 AIR BLOW GUN All metal construction, chrome plated to prevent rust with a cushioned thumb grip for comfort. Has the standard 1/4 NPT air inlet and comes with two interchangeable nozzles; one for spraying and one for stream. These are for use in garages, service stations, and factories. Hooks up to any standard air hose and used for a variety of cleaning purposes such as fuel lines, sawdust etc. This air gun is also available with a 24 long wand for real hard to get to areas and it includes a removable rubber tip. This is a real handy item and a great add on. IMPORT 413 1/4 AIR BLOW GUN LONG 1/4 AIR BLOW GUN

17 AIR HOSE WHIPS These are American made air hose whips. They attach to the end of an air tool, which is then attached to a much longer length of air hose allowing easy rotation and maneuvering of the tool without twisting the air line. They also eliminate the need for a coupler and plug, which could create air pressure loss. These whips are a 3/8 ID and available in either 36 or 6 lengths and complete with brass fittings on each end. WHIP WHIP6 3 GOODYEAR AIR HOSE WHIP 6 GOODYEAR AIR HOSE WHIP

18 AIR CONTROL UNIT This is a complete air control unit for all compressed air systems. The unit is complete with an air filter that filters out all of the flying particles and impurities from your air system, such as dirt, rust, water vapors or oil. All of which can damage your air tools. This unit also comes complete with an air regulator and a lubricator. It regulates the air pressure from 0 to 150 PSI and it lubricates your air tools as you use them. Comes assembled and ready to install. IMPORTED NAM AIR CONTROL UNIT

19 1/4 BLUE COIL AIR HOSE These blue coil air hoses are high tensile, low deformation rated air lines. They really take the abuse of a fast paced, production shop. They are weatherproof to minus 40 with a working pressure of 100 PSI and a maximum working pressure of 250 PSI. The brass ends have the vinyl guards so the stress at the connection point is minimal and they ll hold up to constant pressure and give you years of use. IMPORTED 382 1/4 x 25 BLUE COIL AIR HOSE 383 1/4 x 50 BLUE COIL AIR HOSE

20 1/4" RED AIR HOSE This is the American made Goodyear Horizon red rubber air hose. It is rated at 250 PSI bursting strength and features two ply of tough nylon braid reinforcing and two ply of Goodyear rubber. The rubber jacket is resistant to oils and chemicals. There are 1/4" male brass fittings on the ends and it's all set to hook up. A 1/4" hose is sufficient to run your 1/4" and 3/8" drive air tools as well as air sanders, hammers, saws etc. It is not recommended for 1/2" air tools as the smaller hose does not permit the volume of air needed. 1/4 hose is also preferred by roofers as it allows the right pressure for nail guns and, because it is lighter in weight it is ideal when dragging across a roof. SIZE: 395 1/4" x 25' RED RUBBER GOODYEAR AIR HOSE 396 1/4" x 50' RED RUBBER GOODYEAR AIR HOSE

21 RED RUBBER AIR HOSE This is the famous red rubber air hose made by Goodyear. It is 300 PSI air hose that can withstand the greatest of abuse in shops and garages. These hoses are 3/8 ID and feature a 2 ply inside reinforcing and a 2 ply Goodyear rubber jacket. Unlike the Pliovic air hose, this tough red rubber air hose will not get pin holes associated with welding splatter. It is oil resistant and each end has the 1/4 male brass fittings. This hose is also available with 1/2 ID in 25 and 50 lengths and has a 450 lb working pressure and a 600 lb. burst pressure. 1/2 hose is available with 3/8 or 1/2 NPT fittings. SIZE: FITTINGS: 3825R 3/8 x 25 RED RUBBER AIR HOSE 1/4 NPT 3835R 3/8 x 35 RED RUBBER AIR HOSE 1/4 NPT 401R 3/8 x 50 RED RUBBER AIR HOSE 1/4 NPT 401RVG 3/8 x 50 RED RUBBER AIR HOSE 1/4 W/GUARD 401R100 3/8 x 100 RED RUBBER AIR HOSE 1/4 NPT 374 1/2 x 25 RED RUBBER AIR HOSE 3/8 NPT 402R38 1/2 x 50 RED RUBBER AIR HOSE 3/8 NPT 402R100 1/2 x 100 RED RUBBER AIR HOSE 3/8 NPT 376 1/2 x 25 RED RUBBER AIR HOSE 1/2 NPT 402R12 1/2 x 50 RED RUBBER AIR HOSE 1/2 NPT

22 100 RETRACTABLE AIR HOSE REEL These are industrial grade hose reels with multiple position mounting and adjustable guide arms, so you can mount these on any ceiling or wall. These reels have a full flow, solid brass spool, with four direction, non-snag rollers, and machined automatic rewind, just give it a tug, and the hose will retract immediately. They come complete with 100 feet of yellow rubber air hose rated at 300 PSI, with the standard 1/4 NPT brass fittings. The housing is constructed of industrial grade steel and the whole unit weighs 61 Lbs. IMPORTED AHR100 3/8 x 100 RETRACTABLE AIR HOSE REEL W/ HOSE

23 ORANGE PLIOVIC AIR HOSE This is the orange safety air hose from Goodyear featuring a 300 PSI working pressure and a 1200 PSI bursting pressure. The pliovic construction makes it much lighter than traditional rubber air hose however the downside is that it does get a little stiff in cold weather so it should be used indoors in the shop as opposed to outside in the cold. These hoses are gas and oil resistant, and have the standard 1/4 male fittings on each end. USA Made and available with or without the protective vinyl guard on one end. SIZE: 390 3/8 x 35 ORANGE PLIOVIC AIR HOSE 390VG 3/8 x 35 ORANGE PLIOVIC HOSE W/GUARD 391 3/8 x 25 ORANGE PLIOVIC AIR HOSE 391VG 3/8 x 25 ORANGE PLIOVIC HOSE W/GUARD 397 3/8 x 50 ORANGE PLIOVIC AIR HOSE 397VG 3/8 x 50 ORANGE PLIOVIC HOSE W/GUARD

24 BLUE PLIOVIC AIR HOSE This is the blue pliovic air hose made by Goodyear. It is a 300 PSI air hose that can withstand the greatest abuse. It is resistant to oil, gas, heat and anti-freeze. It also stays flexible in the sun or all the way down to minus 40. This is the best and newest hose developed by Goodyear, the leading manufacturer of air hoses. They have the standard 1/4 male fittings on each end and are available with or without the protective vinyl guard on one. SIZE: 389 3/8 x 25 BLUE PLIOVIC AIRHOSE 389VG 3/8 x 25 BLUE PLIOVIC AIRHOSE W/GUARD 394 3/8 x 35 BLUE PLIOVIC AIRHOSE 394VG 3/8 x 35 BLUE PLIOVIC AIRHOSE W/GUARD 393 3/8 x 50 BLUE PLIOVIC AIRHOSE 393VG 3/8 x 50 BLUE PLIOVIC AIRHOSE W/GUARD

25 PLIOVIC AIR HOSE These air hoses feature a Pliovic coating, (Reticulated Polyvinyl Chloride) that makes it resistant to grease, acids, oils, abrasion and other materials that can corrode standard rubber hoses. Pliovic hose has a working pressure of 250 PSI and a bursting pressure of 1200 PSI. The 3/8 hoses have standard 1/4 male fittings. USA Made. SIZE: AHB25 3/8 x 25 BLUE PLIOVIC AIR HOSE AHB 3/8 x 50 BLUE PLIOVIC AIR HOSE 398 3/8 x 100 BLUE PLIOVIC AIR HOSE 399 3/8 x 300 BLUE PLIOVIC AIR HOSE AHO25 3/8 x 25 ORANGE PLIOVIC AIR HOSE AHO35 3/8 x 35 ORANGE PLIOVIC AIR HOSE AHO 3/8 x 50 ORANGE PLIOVIC AIR HOSE AHO100 3/8 x 100 ORANGE PLIOVIC AIR HOSE AHY25 3/8 x 25 YELLOW PLIOVIC AIR HOSE AHY 3/8 x 50 YELLOW PLIOVIC AIR HOSE AHY100 3/8 x 100 YELLOW PLIOVIC AIR HOSE

26 MILLENIUM AIRHOSE Goodyear s new Millennium air hose is a high visibility black Pliovic air hose that has a bright yellow stripe along the jacket. You can almost see it in the dark! This is the same quality hose Goodyear has always produced; double reinforced 300 PSI working pressure and a 1200 PSI bursting pressure. They have a vinyl hose guard on one end to prevent the coupling from splitting off the hose. This hose is also used for pneumatic machinery, spray solutions, and a lot of other multi purpose applications and is weather and abrasion resistant. USA Made. SIZE: 384 3/8 x 25 MILLENIUM HI VIZ AIRHOSE 385 3/8 x 35 MILLENIUM HI VIZ AIRHOSE 386 3/8 x 50 MILLENIUM HI VIZ AIRHOSE /8 x 75 MILLENIUM HI VIZ AIRHOSE 387 3/8 x 100 MILLENIUM HI VIZ AIRHOSE

27 VINYL GUARD AIR HOSES These are the same top quality Goodyear air hoses that we have always carried, but with the added feature of a 4 vinyl sleeve that covers one end of the hose. This vinyl guard gives the hose a bend restriction at the point where the coupling and the hose take the most abuse, preventing twisting, bending and kinking and the eventual destruction of the entire air line. The 4 vinyl guard also gives the hose high visibility and helps to protect against scratching in automotive applications. USA made by Goodyear. SIZE: 397VG 3/8 x 50 ORANGE PLIOVIC W/ VINYL GUARD 40125VG 392VG 401VG 3/8 x 25 YELLOW RUBBER W/ VINYL GUARD 3/8 x 35 YELLOW RUBBER W/ VINYL GUARD 3/8 x 50 YELLOW RUBBER W/ VINYL GUARD 401B25VG 3/8 x 25 BLACK RUBBER W/ VINYL GUARD 388VG 3/8 x 35 BLACK RUBBER W/ VINYL GUARD 401BVG 3/8 x 50 BLACK RUBBER W/ VINYL GUARD

28 3/8 x 50 AIR HOSE REEL These reels come fully loaded with a 50 rubber air hose. They have the four direction, non-snag hose rollers with the adjustable stop that you can set to any length you want to hang out or down. To reduce wear, the hose attaches to the reel with a heavy duty, swivel joint and spring guard and the hose itself is non-conductive to eliminate any possibility of combustion. The reel can be mounted on the ceiling, the floor, or wall, or even to the bottom of a truck, because the guide arm is fully adjustable. A fully enclosed spring mechanism operates quickly with a gentle tug on the hose line. They re made from a heavy gauge, non-flexing, rolled steel and have a 1/4 thick steel base plate and are long life, maintenance free hose reels that will make life easier in your shop or garage for years. Specifications: 3/8 x 50 Rubber air hose 250 PSI Air Inlet / Outlet: 3/8 1/4 NPT Fittings 19-1/2 Diameter 10-1/4 Wide 20-3/4 High /8 x 50 AIR HOSE REEL W/ HOSE

29 1/2 x 50 AIR HOSE REEL These 1/2 air hose reels by Astro Pneumatic are made for heavy use in bus terminals, fleet garages, and now for anyone needing 1/2 air hoses that they want up and out of the way. The reels come fully loaded with 50 of heavy duty, red rubber air hose and have the four way non-snag hose rollers, adjustable stop, non-slip spring guards, and reinforced joints. They can be mounted securely on the floor, the wall, or the ceiling for long-life, maintenance free use. They re constructed of heavy, non-flexing, rolled steel and have a 1/4 thick steel base plate. The air hose is 1/2 I.D., 50 long, 250 PSI and equipped with standard 3/8 fittings for big air tools. The measurements of the entire unit are 19 1/2 diameter, 10 1/4 wide, and 20 3/4 high from base plate to hose stop. Fully assembled, just unpack and mount. IMPORTED /2 x 50 RETRACTABLE AIR HOSE REEL

30 3/8 AUTOMATIC HOSE REEL Quality makes a big difference in hose reels, and Coxreels has been making state of the art reels for over 60 years. These reels have 4-direction, non-snag hose rollers to reduce wear and full flow swivel joints where the hose attaches to the reel. Coxreels have a heavy duty 1 solid steel axle, not a hollow core, like most reels. The sides of the housing are heavy, ribbed steel discs that have fully rolled edges for maximum protection. These reels are versatile too. They can be used with either air or water hose. They have a heavy duty 1/4 steel plate base and support post and the guide arm easily adjusts to ceiling, floor, wall, and even bottom wind truck mounting. The balanced spring motor is fully enclosed and packed in grease, for long life. USA MADE CR50 3/8 HOSE REEL ONLY (NO HOSE) (NOTE: THESE REELS DO NOT COME WITH HOSE!)

31 3/8 x 25 RETRACTABLE AIR HOSE REEL This is a heavy duty, 3/8 I.D. 25 air hose reel with a spring powered, automatic rewind feature, and an all steel housing designed for industrial or commercial use. It has an extra large reel diameter to prevent walk-up hose binding, and 4-way roller guides and a guide arm that adjusts for any mounting position, including floor, pit and ceiling mounting. Specifications: Hose Capacity: 3/8 x 25 3/8 Air Inlet / Outlet Reel Diameter: 19 1/2 Width: 10 1/4 Overall Height: 20 3/4 Includes: 25 Rubber Hose and hose stop IMPORTED x 3/8 RETRACTABLE AIR HOSE REEL

32 HAND CRANK AIR HOSE REEL Here s the simple and inexpensive answer to tangled, dirty, and damaged air hose lines. This professional, manually cranked air hose reel keeps your air compressor hose safe and manageable. It s made of heavy gauge, contractor grade steel with a tension brake that controls the length of hose you pull out. It can be solid or swivel mounted on the wall, work bench, or service vehicle, indoors or outdoors and includes a 36 leader hose. This reel will accommodate up to 100 of 3/8 air hose. IMPORT 375 HAND CRANK AIR HOSE REEL

33 JACK HAMMER HOSE This is American made, 3/4 red rubber jackhammer hose. It features a 300 PSI working pressure and 1200 PSI bursting pressure and is oil, gas and grease resistant. The outside rubber jacket is heavy duty, and resists crushing, cracking, abrasion and weather. They are fitted with the Dixon or Air King type 3/4 universal twist lock connectors that are steel banded on the ends. This hose is industrial quality to handle tough applications and used by municipalities, contractors and road construction /4 x 50 JACKHAMMER HOSE

34 WATER HOSE RUBBER WATER HOSE This is an all rubber, American made water hose. It is specially made for hot water use to 160 yet it can maintain flexibility in sub zero temperatures. It resists abrasion and it is very durable under any conditions and is ideal for any commercial or industrial use. The hose comes with solid brass 5/8 octagon fittings, and has a working pressure of 200 PSI. OSHA APPROVED /4 x 25 BLACK RUBBER WATER HOSE 404 3/4 x 50 BLACK RUBBER WATER HOSE 411 3/4 x 100 BLACK RUBBER WATER HOSE PLIOVIC WATER HOSE This is a heavy duty, blue Pliovic water hose rated at 1,000 PSI bursting pressure. This hose is very tough and wont crack or break like the cheap hoses do. It is extremely flexible and resists oil, and abrasions. This will not leave marks like the rubber hoses will and it is OSHA APPROVED. WHB50 WHB100 3/4 x 50 BLUE PLIOVIC WATER HOSE 3/4 x 100 BLUE PLIOVIC WATER HOSE

35 GREEN WATER HOSE This is heavy duty green Pliovic water hose from Goodyear called The Greenskeeper. A unique thing about this hose is that it won t crack or break, plus it s completely resistant to oil, chemicals, and is also abrasion resistant. The machined brass fittings are 3/4 NPT on the 3/4 hose and 1 NPT on the 1 hoses and will fit standard water spigots. They are rated at 300 PSI working strength. These hoses are ideal for use by landscapers, contractors, golf courses, maintenance shops and any other business that needs a large volume water hose. OSHA Approved. SIZE: WHG50 3/4 x 50 GREEN PLIOVIC WATER HOSE WHG75 3/4 x 75 GREEN PLIOVIC WATER HOSE WHG100 3/4 x 100 GREEN PLIOVIC WATER HOSE 1WHG50 1 x 50 GREEN PLIOVIC WATER HOSE 1WHG75 1 x 75 GREEN PLIOVIC WATER HOSE 1WHG100 1 x 100 GREEN PLIOVIC WATER HOSE

36 GREEN GARDEN HOSE These are 5/8 diameter by 50 foot long green garden hoses. They are 3 ply hoses with an abrasion proof jacket and rated industrial. They are constructed with a Flexon covering so they will stay pliable in cold weather and have a knitted nylon reinforcement and solid brass, full flow couplings. They re USA made and carry a 3 year warranty. GWH50 5/8 x 50 USA GREEN GARDEN HOSE

37 5 PC. AIR BLOW GUN KIT This is a 5 piece air blow gun kit that features the air gun itself and four interchangeable tips to reach into various tight spaces. The air gun is a metal construction and chrome plated to prevent rust. It has a rubber tip, a standard 1/4 NPT air inlet and a cushioned thumb grip for comfort. Included are 4 interchangeable lances; a 4 extension tip, a 3 extension tip, a 2 extension tip and a 3/4 ventless tip which provides concentrated air stream. These are for use in garages, service stations, and factories. Hooks up to any standard air hose and are used for a variety of cleaning purposes such as fuel lines, sawdust etc. 413KIT 5 PC. 1/4 AIR BLOW GUN KIT

38 5 PC. BRASS QUICK COUPLER SET These are quick-connect couplers for all 3/8 air hose with the standard 1/4 fittings. After securing these ends to your air line, simply pull back the sleeve and push in the plug hose end provided. No need to ever thread air lines together, just attach any of these quick connectors and pop on air tools or another length of air hose. This 5 piece brass plated coupler set includes 1 female coupler, 1 female connector and 3 male connectors. IMPORTED PC. BRASS QUICK COUPLER SET

39 1/2 x 50 AIR HOSE REEL Here s a big air hose reel for the big power tools! This is a 1/2 I.D. 50 long air hose on a heavy duty, retractable reel. The all steel constructed reel has a four-roller, adjustable rewind stop for convenient positioning of the hose, an anti-snag hose guide, and can be mounted on the floor, wall or ceiling. Because 1/2 air hose is a very bulky and a very heavy hose to work with, the beauty of this unit is that it will prevent the hose from looping on the floor, snagging on other shop equipment and even prevent someone from tripping and injuring themselves over a loose hose. Included is a non-conductive, 300 PSI, 1/2 x 50 air hose with 3/8 fittings for the big air wrenches, air hammers etc. The whole unit with the air hose weighs 55 Lbs and it measures approximately 20 in diameter, 10 1/4 wide and 20 3/4 high from mounting base to hose stop. IMPORTED AHR1250 1/2 x 50 RETRACTABLE AIR HOSE REEL

40 50 RETRACTABLE AIR HOSE REEL This is a heavy duty, 3/8 I.D. 50 air hose reel with a spring powered, automatic rewind feature, and an all steel housing designed for industrial or commercial use. It has an extra large reel diameter to prevent walk-up hose binding, and 4-way roller guides and a guide arm that adjusts for any mounting position, including floor, pit and ceiling mounting. Specifications: Hose Capacity: 3/8 x 50 3/8 Air Inlet / Outlet 300 PSI Working Pressure Includes: 50 Rubber Hose and hose stop 9 1/2 W x 23 1/2 Diameter Weight: 44 Lbs. IMPORTED AHR50 50 x 3/8 RETRACTABLE AIR HOSE REEL

41 The newest collaboration between ACE Industrial Supply and Goodyear Rubber Co. is this new technological breakthrough in air hose, the all new Armor Tech. Built tough to ACE Industrial s rigid standards, this air hose is twice as strong yet lighter in weight than any other hose on the market. It features a 300 PSI working pressure and a 1200 PSI bursting pressure. It has the standard 1/4 NPT fittings on each end and they are triple crimped beneath the protective jacket. On the working end of the hose is a heavy duty vinyl guard for even more protection when attached to pneumatic tools. Armor Tech is shielded for abrasion resistance against any surface that gets in its way! This is a petroleum based product and with oil prices going through the roof, the new technology of this air hose has allowed us to offer the best hose on the market yet still manage to keep the cost down. Armor Tech is available only through ACE Industrial Supply. You will not find this amazing air hose anywhere else, and each hose is tagged with our toll free number and the Goodyear logo. SIZE: CK25 3/8 x 25 ARMOR TECH AIR HOSE - USA CK35 3/8 x 35 ARMOR TECH AIR HOSE - USA CK50 3/8 x 50 ARMOR TECH AIR HOSE - USA CK100 3/8 x 100 ARMOR TECH AIR HOSE - USA

42 ACE Industrial Supply and Goodyear Rubber Company have teamed up to develop this super air hose called Black Widow. Resistant to any abrasive surface, concrete, asphalt, grating, dirt and anything in its path, this hose is made to last and is virtually eating up the competition! The outer skin of the Black Widow is made of Goodyears highest rated, double wall, pliovic which completely seals the inner layers from end to end. The fittings on each end are standard 1/4 and they are triple crimped beneath the pliovic skin to make them last and take the abuse. The Black Widow has a 300 PSI working pressure and a 1200 PSI bursting pressure and the working end features a tough vinyl guard over the fitting to give it even more durability and protection. Black Widow is exclusive to ACE Industrial Supply and you will not find this awesome air hose anywhere else. It is distinguishable by its jet black body with the deep red stripe and remembered for its durability. SIZE: BW25 3/8 x 25 Black Widow USA AIR HOSE BW35 3/8 x 35 Black Widow USA AIR HOSE BW50 3/8 x 50 Black Widow USA AIR HOSE BW75 3/8 x 75 Black Widow USA AIR HOSE BW100 3/8 x 100 Black Widow USA AIR HOSE

43 CLEAR WATER HOSE This is GoodYears famous clear water hose. It is fully cross-braided for strength and flexibility and the outer clear cover is a blend of vinyl polymers over the braiding. This is ideal hose for golf courses and it is super abrasion resistant. You can pull this hose over concrete and asphalt without the worry of scratching away the covering. You can also leave this hose in the sun all day and it will not cloud over. The ends are steel banded for extreme pressure resistance. USA MADE. SIZE: WHC50 3/4 x 50 CLEAR BRAID WATER HOSE WHC75 3/4 x 75 CLEAR BRAID WATER HOSE WHC100 3/4 x 100 CLEAR BRAID WATER HOSE 1WHC25 1 x 25 CLEAR BRAID WATER HOSE 1WHC50 1 x 50 CLEAR BRAID WATER HOSE 1WHC75 1 x 75 CLEAR BRAID WATER HOSE 1WHC100 1 x 100 CLEAR BRAID WATER HOSE

44 1/2 BLUE AIR HOSE Goodyear makes the best air hoses in the World, and these 1/2 hoses are testament to that. They are 1/2 inside diameter and are available with either 3/8 or 1/2 fittings. You can use cheaper air hose, but when you work with big machinery and use those high torque, pneumatic tools, why worry about bubbles, pin holes, and blown fittings? Get Goodyear and forget it! This is Goodyears very popular blue air hose; it s bright, heavy duty, and made to last. Whether you use 3/8 NPT or 1/2 NPT fittings, this is the best hose for the job. USA made SIZE: NPT: GY101 1/2 x 25 3/8 BLUE GOODYEAR AIR HOSE GY103 1/2 x 35 3/8 BLUE GOODYEAR AIR HOSE GY105 1/2 x 50 3/8 BLUE GOODYEAR AIR HOSE GY107 1/2 x 75 3/8 BLUE GOODYEAR AIR HOSE GY109 1/2 x 100 3/8 BLUE GOODYEAR AIR HOSE GY102 1/2 x 25 1/2 BLUE GOODYEAR AIR HOSE GY104 1/2 x 35 1/2 BLUE GOODYEAR AIR HOSE GY106 1/2 x 50 1/2 BLUE GOODYEAR AIR HOSE GY108 1/2 x 75 1/2 BLUE GOODYEAR AIR HOSE GY110 1/2 x 100 1/2 BLUE GOODYEAR AIR HOSE

45 IRONFLEX BRAIDED POLY AIR HOSE IRONFLEX is 50% lighter than the bulky rubber air hose, and twice as flexible! It s constructed so the inner tube, the braiding, and the outer blue transparent cover, will never separate, even with excessive bending, flexing, and pulsating. The tough threaded ends swivel freely, so there s no problem connecting hoses together and there are nice, big hose minders on the ends to protect them. This hose is cold weather friendly and will coil effortlessly into a loop in sub-zero weather, to minus 20. It has a working pressure of 200 PSI, and a burst pressure of 800 PSI. IRONFLEX hose is extremely tough and abrasion resistant and there are no bubbles, no separations, and no connector problems. IMPORTED SIZE: N3850IF 3/8 x 50 IRONFLEX POLY AIR HOSE N38100IF 3/8 x 100 IRONFLEX POLY AIR HOSE N1425IF 1/4 x 25 IRONFLEX POLY AIR HOSE N1450IF 1/4 x 50 IRONFLEX POLY AIR HOSE N14100IF 1/4 x 100 IRONFLEX POLY AIR HOSE

46 NEIKO 1/4 x 50 WELDING HOSE REEL If you have air hose reels, you know how great it is to have your hoses up off the floor; they stay cleaner and you will need fewer replacements, so you save a lot of money and hassles. These welding hose reels work the same. You can mount them on a wall, the ceiling, or on any mobile structure and your problems with welding hose punctures, splits, and pin holes are greatly reduced. These are a 50 capacity, with the same retrieval rate as air hose reels and they come with all the necessary mounting hardware and connectors. N100 NEIKO 1/4 x 50 WELDING HOSE REEL

47 1/2 x 50 FT. RECOIL GARDEN HOSE If you ve ever run over, stepped on, or got caught up in a garden hose then you ll really appreciate these recoil garden hoses. They are 1/2 in diameter, and 50 long when stretched out. They have solid brass fittings and include a 6 function spray gun nozzle. These are the perfect answer to unruly garden hoses on the side or back of the shop, on the patio, at the shop sink, or just conveniently tucked away on your house water bib. Springs back to original size after use for easy storage RECOIL WATERHOSE W/ NOZZLE

48 RUBBER AIR HOSE This is the heavy duty American made rubber air hose from Goodyear. It is an Industrial grade for use in shops as well as garages. These hoses feature two ply tough nylon reinforcing and two ply rubber and are oil resistant. They are 3/8 ID, (inside diameter), and have the 1/4 brass male fittings on both ends. These hoses have a working pressure of 150 PSI, (pounds per square inch), with a maximum rating of 300 PSI. (With Vinyl Guard) SIZE: /8 x 25 YELLOW RUBBER AIR HOSE 392 3/8 x 35 YELLOW RUBBER AIR HOSE 401 3/8 x 50 YELLOW RUBBER AIR HOSE 400 3/8 x 100 YELLOW RUBBER AIR HOSE 401B25VG 3/8 x 25 BLACK RUBBER HOSE W/GUARD 401B25 3/8 x 25 BLACK RUBBER AIR HOSE 388 3/8 x 35 BLACK RUBBER AIR HOSE 401B 3/8 x 50 BLACK RUBBER AIR HOSE 401B100 3/8 x 100 BLACK RUBBER AIR HOSE

49 WELDING HOSE This is the 1/4 standard red and green virgin rubber hose referred to as oxy/acetylene hose or twin line welding hose. It s used for connecting the welding and cutting torches to the gas cylinders. This hose features standard brass fittings and brass keepers to prevent kinking. These hoses feature a 300 to 900 PSI rating and are available in 50 and 100 lengths in USA Made by Goodyear or Dayco, and 25 length import by Neiko. MAKE: 406USA 1/4 x 50 WELDING HOSE GOODYEAR 407 1/4 x 25 WELDING HOSE NEIKO 406 1/4 x 50 WELDING HOSE DAYCO 408 1/4 x 100 WELDING HOSE DAYCO

50 1/4 YELLOW RECOIL AIR HOSE This hose is self-storing, permanently coiled nylon air hose with a 200 PSI working pressure and spring guarded ends to prevent kinking. This hose springs back to its original shape and length and out of the way so it is great for assembly line work. It is constructed of heavy duty, oil proof nylon and has standard 1/4 NPT fittings on each end. Available in 25 and 50 lengths, also available in 3/8 ID. IMPORT SIZE: 405 1/4 x 25 YELLOW RECOIL AIR HOSE /4 x 50 YELLOW RECOIL AIR HOSE 381 3/8 x 50 YELLOW RECOIL AIR HOSE