Commercial Thermal Expansion Tanks
|
|
- Philip Norris
- 6 years ago
- Views:
Transcription
1 Commercial Thermal Expansion s
2 mtrol thermal expansion tanks are engineered to control pressure build-up in closed, potable water systems. vailable in diaphragm, full acceptance and partial acceptance bladder designs, all Therm-X-Trol expansion tanks are made in the US at our ISO 900 : 2008 registered facilities. SME tanks meet Section VIII, Division Standards. Inline Diaphragm s ST-5C & ST-2C; 50 & 75 PSI Deep-drawn shell increases tank strength, reduces tank diameter by 20% and cuts tank weight by 50%. ntimicrobial liner neutralizes bacteria on contact; lasts for the life of the tank. Tested to JIS Z 280 for reduction of Legionella, staphylococcus and E. coli. Follows SHRE 88 nti-legionella guidelines. Patented Turbulator prevents sediment buildup. Fresh Turbulator Patented diffuser agitates incoming water to keep it tasting fresh and clean. Prevents sediment build-up to extend tank life. Fresh Turbulator High-Grade Stainless Steel Connector Deep Drawn Steel Dome Corrosion Proof Liner with ntimicrobial Protection Grooved Diaphragm Hoop Ring for a permanent seal ntimicrobial Liner Protection Safe, Silver-Ion technology targets active microorganisms; neutralizes bacteria on contact. Compound is molded into the water reservoir lining; lasts the life of the tank; patent pending. acteria Silver Ion Release Liner Surface utyl Diaphragm for extra long life Welded Steel Construction Liner Typical Installation Silver Ions ackflow Preventer Check Valve or Pressure Reducing Valve Cold Supply Hot THERM-X-TROL Expansion T & P Valve Convenient ir Stem Location Heater
3 SME Thermal Expansion s SME Diaphragm Series Specifications ST-5C-DD & ST-2C-DD (50 & 75 PSI) ST-20VC through ST-70VC ST-5C & ST-2C (250 & 300 PSI) ST-80VC through ST-20VC ccept. Stainless Steel Connection. Maximum Operating Temperature: 200 F. Factory Pre-charge: 55 PSIG. Working Pressure 50 PSI 75 PSI 250 PSI 300 PSI ST-5C-DD /4 NPTM ST-5C / ST-2C-DD /4 NPTM ST-2C / ST-20VC / ST-30VC / ST-42VC / ST-60VC / ST-70VC / ST-80VC / ST-20VC / ST-80VC / ST-20VC / SME Full cceptance ladder Series Specifications ccept. ronze Connection. Working Pressure 25 PSI 50 PSI 75 PSI 250 PSI 300 PSI ST-447C ST-448C ST-449C ST-450C ST-45C ST-452C ,005,07 ST-453C ,00,205 ST-454C ,265,400 ST-455C ,065,350,490 ST-456C ,52,423,650,660,830 ST-457C ,335,505,875 2,230 2,455 SME Partial cceptance ladder Series Specifications ccept. Stainless Steel Connection. Working Pressure 50 PSI ST-35CL ST-50CL ST-85CL ST-00CL ST-30CL ST-65CL ST-200CL ST-300CL ST-400CL ST-500CL ST-600CL
4 Non-SME Thermal Expansion s ST-5, ST-8, ST-2 ST-25V through ST-20V Non-SME Diaphragm Series Specifications ccept. Working Pressure 50 PSI ST ¾ NPTM 5 ST ¾ NPTM 7 ST ¾ NPTM 9 ST-25V ¾ 23 ST-30V ¾ 25 ST-42V ¾ 33 ST-60V ¼ 6 ST-80V ¼ 69 ST-80V ¼ 92 ST-200V ¼ 03 ST-20V ¼ 23 Stainless Steel Connection. Maximum Operating Temperature: 200 F. Factory Pre-charge: ST-5, ST-8, ST-2: 50 PSIG; ST-25V through ST-20V: 40 PSIG. ST-45 through ST-457 Non-SME Full cceptance ladder Series Specifications ccept. Working Pressure 50 PSI ST ST ST ST ST ST ,423 ST ,505 ronze Connection. ST-35L through ST-600L Non-SME Partial cceptance ladder Series Specifications ccept. Stainless Steel Connection. Working Pressure 50 PSI ST-35L ST-50L ST-85L ST-00L ST-30L ST-65L ST-200L ST-300L ST-400L ST-500L ST-600L
5 Thermal Expansion s Vertical Diaphragm s ST-20VC through ST-20VC Head and shell design with internal diaphragm tank(s). ntimicrobial liner neutralizes bacteria on contact. Tested to JIS Z 280 for reduction of Legionella, staphylococcus and E. coli. Follows SHRE 88 nti-legionella guidelines. Fixed diaphragm design. Typical Installation ackflow Preventer Check Valve or Pressure Reducing Valve Cold Supply Hot THERM-X-TROL Expansion T & P Valve Heater Vertical ladder s ST-440/450 & ST-CL/L Series utyl bladder, industry's thickest. Replaceable bladder avoids costly tank replacement. vailable in full acceptance and partial acceptance models. Typical Installation ackflow Preventer Check Valve or Pressure Reducing Valve Cold Supply Hot THERM-X-TROL Expansion T & P Valve Heater
6 Sizing Guide Things You Must Know:. Total Heater... gallons 2. Maximum Temperature... F 3. Minimum Temperature... F 4. Maximum Operating Pressure at Expansion... PSIG 5. Line Pressure at Expansion... PSIG Selection of Expansion : 6. Find and enter Expansion Factor... (see Table ) 7. cceptance = Line () x Line (6)... gallons 8. Find and enter Design Pressure Factor (DPF)... (see Table 2) 9. Minimum = Line (7) x Line (8)... gallons 0. Select an SME or non-sme THERM-X-TROL Expansion that is at least equal to Line (9) for (gallons) and Line (7) for cceptance (gallons). Multiple tanks may be required. Maximum Temp. Table : Expansion Factor Minimum Temperature 40 F 50 F 60 F 70 F 80 F 90 F 00 F 60 F F F F F F F F F F F F F F F F F F F For fluid applications other than water, consult MTROL technical services. Table 2: Design Pressure Factor (DPF) Maximum llowable Pressure (PSI) Line Pressure (PSI) Design Pressure Factor (DPF) For conditions not shown in table, use equation: llow. Pressure DPF = llow. Pressure - Line Pressure LOW-LED 400 Division Road, West Warwick, RI US T: F: MTROL Inc. MC 409 (0/8)
C Lite CAD SERIES. ACS Approved. Patented CAD-2 diaphragm technology. Rugged copolymer polypropylene base. Quality brass air stem with o-ring seal
2 C Lite CAD SERIES Patented CAD-2 diaphragm technology Unique 3 piece construction Reinforced Plastic Connection Durable continuous strand fiberglass sealed with epoxy resin NSF Standard 61, CE/PED, WRAS,
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationVertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationSABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationBladder-Type Accumulators
18 ladder-type ccumulators n Overview The typical bladder accumulator makes use of the considerable differences in the relative compressibility between a gas and a fluid. typical design consists of a gas
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationModel MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
More informationVertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
More informationTECHNICAL DATA OBSOLETE
June 1, 2008 Foam 240a 1. DESCRIPTION The Chemguard Bladder Tank is one component in a balanced pressure foam proportioning system. It requires no external power, other than the water pressure to ensure
More informationIAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
More informationCash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified
Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot
More informationExpansion Tank Design (Chilled Water)
Expansion Tank Design (Chilled Water) Table of Contents 1.0 Introduction... 2 1.1 Units... 2 2.0 Disclaimer... 2 3.0 Expansion Tank Types... 2 3.1 Open Tank... 2 3.2 Closed Tank with No Bladder... 3 3.3
More informationLMU100/200 Series. Standard Specifications
Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient
More informationSealed Systems Altecnic Ltd - Caleffi group. Sealed Systems. Heating vessel sizing guide
1.25 Sealed Systems Sealed Systems Sealed primary central heating systems are the most commonly used form of heating system throughout Europe and the rest of the developed world. Sealed central heating
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR WATER HEATER SUPPLY SHUTOFF VALVE WITH A / THERMAL EXPANSION CONTROL VALVE IGC 128-2006a8 1. PURPOSE 1.1 The purpose
More informationOFI Testing Equipment - Aging Cell Instructions Page 1 of 4. Instructions OFITE AGING CELLS
OFI Testing Equipment - Aging Cell Instructions Page 1 of 4 Instructions OFITE AGING CELLS The OFITE Aging Cell is a patented pressure vessel that enables samples to be subjected to temperatures higher
More informationAirfix. Flamco. Flamco. Pressure expansion vessels for sanitary appliances and potable water systems AIRFIX A AIRFIX D AIRFIX D-E
AIRFIX EXPANSION VESSELS Flamco Airfix Pressure expansion vessels for sanitary appliances and potable water systems AIRFIX A AIRFIX AIRFIX -E Flamco Edition 2005 / EXP Flamco Flamco offers you a wide choice
More informationUltRo Dual Flow Reverse Osmosis Water System
UltRo Dual Flow Reverse Osmosis Water System Congratulations on this great investment to your health. **IMPORTANT NOTE BEFORE YOU BEGIN** We recommend you call your local friendly plumber to ensure proper
More informationInstallation, Operation and Maintenance Instructions Buffer Vessel OM006
Installation, Operation and Maintenance Instructions Buffer Vessel OM006 Calorifiers Heat Exchangers Pressurisation Units Sales Tel: 01457 835700 Sales Fax: 01457 832700 E-mail: sales@gmsthermal.co.uk
More informationWATER HEATER THERMAL EXPANSION TANKS Owner s Manual. Safety Instructions Installation Maintenance Warranty. Models: 2-5 Gallon Capacity
WATER HEATER THERMAL EXPANSION TANKS Owner s Manual Safety Instructions Installation Maintenance Warranty Models: 2-5 Gallon Capacity Thank You for purchasing this Thermal Expansion Tank. Properly installed
More informationSIZING THE WELL-X-TROL
West Warwick, Rhode Island 02893 SIZING THE WELL-X-TROL POTABLE WATER WELL TANK Table 1. Series 420 & 447 Pressure Switch This handbook will discuss the basic sizing used for our larger Well-X-Trols such
More informationLARGE R/W GATE VALVES
The original, and the definitive standard. LARGE R/W GATE VALVES 24 THROUGH 54 STYLE 7000 AWWA C515 250 PSI NSF 61 Certified Fusion Bond Epoxy Coated 10 Year Limited Warranty M&H Valve is a division of
More informationCASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
More informationSIZING THE EXTROL DIAPHRAGM-TYPE HYDRO-PNEUMATIC TANK
SIZING THE EXTROL DIAPHRAGM-TYPE HYDRO-PNEUMATIC TANK 1400 Division Road, West Warwick, RI 02893 T: 401.884.6300 F: 401.885.2567 www.amtrol.com Sizing the ExTrol Diaphragm-Type Hydro-Pneumatic Tank For
More informationPrinciples of Pressure Regulation. Zurn Wilkins Pressure Reducing Valves
Principles of Pressure Regulation Zurn Wilkins Pressure Reducing Valves Benefits of Pressure Reduction Water Conservation The average household can reduce water consumption around 33% by adjusting the
More informationPULSATION DAMPENER / SUPPRESSOR SERIES PDS PROVIDES MULTIPLE SYSTEM SAFEGUARDS
PULSATION / SUPPRESSOR SERIES PDS PROVIDES MULTIPLE SYSTEM SAFEGUARDS FUNCTIONS: 1. Pulsation Dampener smooths pump flow 2. Surge Suppressor absorbs shocks and vibrations 3. Water Hammer Arrestor eliminates
More informationAWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
More informationCorrugated Steel Water Tanks Durable Water Storage
Durable Water Storage Made from Corrosion-Resistant Steel Corrugated Steel Water Tanks provide quality water storage for a variety of purposes. Constructed from high-quality steel, these water storage
More informationBulletin TCR-104 & 109 Filling and adding to the Glycol pressure system
Bulletin 061013 TCR-104 & 109 Filling and adding to the Glycol pressure system 1. Glycol System and air On this model the glycol system is a closed system, the glycol is not exposed to the air. No external
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 347a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated
More informationFOAM TANK (1/2) DATA SHEET
FIRE FIGHTING EQUIPMENT DATA SHEET FOAM TANK (1/2) DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER : ITEM NO. : 02 PROJECT : QUANTITY : 03 LOCATION : SERVICE : FOAM SYSTEM 04 05 CODE & STANDARDS
More informationPractical Guide. By Steven T. Taylor, P.E., Member ASHRAE
ractical Guide The following article was published in ASHRAE Journal, March 2003. Copyright 2003 American Society of Heating, Refrigerating and Air- Conditioning Engineers, Inc. It is presented for educational
More informationFlange Bolt Torquing. for Resistoflex Plastic-Lined Piping Products. Torquing. Retorquing. Hydrotesting. Annual retorquing
Flange Bolt Torquing for Resistoflex Plastic-Lined Piping Products Torquing When assembling flange connections, always use a full complement of clean, new high strength A193-B7 bolting. If using stainless
More informationTECHNICAL DATA. than the water inlet pressure to the concentrate
Foam102a 1. DESCRIPTION The Viking Low Flow Foam/Water proportioning system, is a UL Listed and FM Approved system, for use with 3M foam concentrates. This system consists of a standard wet pipe sprinkler
More informationInstallation, Operation and Maintenance Instructions for Mild Steel Buffer Vessel
OM006 Installation, Operation and Maintenance Instructions for Mild Steel Buffer Vessel The operating and maintenance instructions contained within this package are for standard mild steel buffer vessels
More informationAging Cell, OFITE Style. Included Items
DRILLING FLUIDS EQUIPMENT For over 30 years OFI Testing Equipment (OFITE) has provided instruments and reagents for testing drilling fluids, well cements, completion fluids, and wastewater. In addition
More informationSIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationJR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE
JR Series Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves
More informationInstallation, Operation and Maintenance Instructions for Direct Hot Water Storage Vessels
OM003 Installation, Operation and Maintenance Instructions for Direct Hot Water Storage Vessels The operating and maintenance instructions contained within this package are for standard storage vessels
More informationINTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
More informationhydro-pac, inc. Low-Pressure Gas Compressors 1500 to 6000 PSI
hydro-pac, inc. LX-SERIES Low-Pressure Gas Compressors 1500 to 6000 PSI hydro-pac, inc. LX-SERIES Features Hydro-Pac LX-SERIES Gas Compressors feature: Oil-free non lubricated gas pistons and cylinders
More informationSeries 8500 Expansion Compensators. Catalog 674H
Series 8500 Expansion Compensators Catalog 674H 500 Laminated Bellows Expansion J Series 8500 on Joints Expansion Compensators Sizes 3/4" through 4" Threaded, welded, flanged and grooved steel pipe joints
More informationOverflow valves Type OFV REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3 Features...........................................................................................
More informationGrundfos GT TANK Keep it safe
GRUNDFOS GT TANK Grundfos GT TANK Keep it safe Long-life tanks for all needs Grundfos pressure tanks are all ideally suited and approved for use with drinking water. The material used ensures that there
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationFOAM TANK (1/2) DATA SHEET
FIRE FIGHTING EQUIPMENT DATA SHEET FOAM TANK (1/) DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER : ITEM NO. : 0 PROJECT : QUANTITY : 0 LOCATION : SERVICE : FOAM SYSTEM 0 05 CODE & STANDARDS
More informationBall Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
More informationAirfix Pressure expansion vessels for sanitary appliances and potable water systems
airfix expansion vessels Your reliable partner 4 Airfix Pressure expansion vessels for sanitary appliances and potable water systems AIRFIX A AIRFIX AIRFIX -E AIRFIX P Edition EXP 2009 Flamco offers you
More informationSG TF. Q = 963 Cv (P1 - P2)(P1 + P2) TECHNICAL INFORMATION. Flow Q (GPM)
TECHNICAL INFORMATION BuTech designs all pressure-containing equipment to meet or exceed the applicable requirements of Section VIII, Division1 or Division 2 of the ASME Boiler and Pressure Vessel Code
More informationHand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS
Data sheet Hand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations,
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 331a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated
More informationTechnical Instructions
Technical Instructions IS-P-596MI Flowrite II Iron ody Series 596 MI Description n Powers Flowrite II Water Mix (MI) Valves combine hot and cold water proportionally to satisfy the demands of the controlling
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 333a 1. Description Viking supervised Surefire Preaction Systems Utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated Viking G-3000P Valve comes complete
More informationBlanketing Valve ZM-R. low pressure reducing valve
Blanketing Valve low pressure reducing valve ZMR Ø a / c DN f e Pressure range: Supply pressure: up to +16 bar / +6424 inch W.C. Set pressure for function: up to +500 mbar / +200 inch W.C. Set pressure
More informationPressure balanced valves (PN 25) VM 2 2-way valve, external thread VB 2 2-way valve, flange
Data sheet Pressure balanced valves (PN 25) 2-way valve, external thread VB 2 2-way valve, flange Description VB 2 and VB 2 are two-way valves designed to work with Danfoss electric actuators AMV(E) 0,
More informationBLADDER TANK PROPORTIONING SYSTEM PRE-PIPED
BLADDER TANK PROPORTIONING SYSTEM PRE-PIPED HD FIRE PROTECT TECHNICAL DATA TANK MOUNTING Vertical or Horizontal TYPE COENTRATE For Vertical Tank 140 liters STORAGE CAPACITY to7500 liters (36 TO 2000 Gallon
More informationTECHNICAL DATA OBSOLETE
April 9, 2009 Preaction 326a 1. DESCRIPTION Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilizing the Viking G-4000P Deluge Valve. The small profi le, lightweight,
More informationP-04 Stainless Steel Corrugated Hoses and Metal Bellows Expansion Joints
Guideline No.P-04 (201510) P-04 Stainless Steel Corrugated Hoses and Metal Bellows Expansion Joints Issued date: 20 th October 2015 China Classification Society Foreword This Guideline is a part of CCS
More informationFlexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
More informationBTV. Internally threaded 2-way control valve. Flow characteristics. Function
Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and
More informationBladder Tank Installation & System Design Information
Bladder Tank Installation & System Design Information The Chemguard Bladder Tank is one component in a balanced pressure foam proportioning fire protection system. It requires no external power other than
More informationPRESSURE EQUIPMENT: REGULATIONS AND INSPECTIONS CODE NSH 222 Date: July 2003 Revision: 00 Page: 1 of 7
CODE NSH 222 Date: July 2003 Revision: 00 Page: 1 of 7 A SUMMARY OF REGULATIONS AND OF PRESSURE APPLICABLE REGULATIONS Equipment in which pressure builds up (no complementary technical instruction) From
More informationOverflow valves Type OFV Type OFV-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 Type OFV-SS 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
More informationWaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
More informationAPPLICATIONS ROV & AUV SEISMIC PRODUCTION SYSTEMS DOWNHOLE JUMPER & CABLE SYSTEMS DRILLING CONTROL
APPLICATIONS ROV & AUV SEISMIC PRODUCTION SYSTEMS DOWNHOLE JUMPER & CABLE SYSTEMS DRILLING CONTROL ROV & AUV PRODUCTS GRE (Glass Reinforced Epoxy) CS-MS 55 & 66 SERIES MINI-CON HUMMER GLOBE-CON ALL-WET
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More information94270 Vapor Guard Tank Blanketing Valve Vapor Guard Tank Blanketing Valve What is Tank Blanketing? Features How does it work?
94270 What is Tank Blanketing? blanketing systems are used to prevent the escape of liquid vapors into the atmosphere or to prevent moisture from entering a tank and contaminating its contents. A tank
More informationALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
More informationBERMAD Waterworks. Level Control Valve with Bi-Level Vertical Float. 700 Series Model B. Features and Benefits. Major Additional Features
Level ontrol Valve with i-level Vertical Float Reservoir filling Very low supply-pressure Low noise generation Energy cost-critical systems Systems with poor water quality Reservoir outlet Distribution
More informationJR Series. Gas Pressure Reducing Valves. a division of Jordan Valve GAS PRESSURE REDUCING VALVES
a division of Jordan Valve JR Series Gas Pressure Reducing Valves GAS PRESSURE REDUCING VALVES The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and
More informationSeries 8R HIGH PERFORMANCE
Triac 8R Series s are the finest quality 3-piece valves on the market. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville
More informationAir Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
More informationWATER MADE EASY MARINE ENERGY MUNICIPAL INDUSTRIAL
Capital Controls Series 71V3000 The Series 71V3000 electrically-heated vaporizer automatically vaporizes and superheats liquid chlorine, sulfur dioxide or ammonia at a rate controlled by the gas feed system.
More informationPressure balanced valves (PN 25)
Data sheet Pressure balanced valves (PN 25) 2-way valve, external thread VB 2 2-way valve, flange Description VB 2 and VB 2 are two-way valves designed to work with Danfoss electric actuators AMV(E) 10,
More informationPRESSURE REGULATORS GAS BACK PRESSURE NON VENTING
GAS BACK PRESSURE NON VENTING APPLICATION: Vent lines or pressure regulation on separators, heater treaters, compressor stations, gas gathering and distribution systems where it is desired that no gas
More informationBladder Accumulators. General Information. Bladder Accumulators. Introduction. Accumulator Function. Why use a Bladder Accumulator?
General Information Introduction Accumulator unction Bladder accumulators provide a means of regulating the performance of a hydraulic system. The design of the Stauff bladder accumulator makes use of
More informationCVI Valve Line. Exceeds the industry s highest standards for reliability and performance
CVI Valve Line Exceeds the industry s highest standards for reliability and performance Available in the most standard models with the shortest lead times in the industry Exceptional quality every CVI
More informationInstallation, Operation, and Maintenance Manual
Industrial Process Installation, Operation, and Maintenance Manual Handwheel Operated Valves (970) Table of Contents Table of Contents Introduction and Safety...2 Safety message levels...2 User health
More informationTeam Insert Valve Sample Specification The Insert Valve shall conform to the following:
Team Insert Valve Sample Specification The Insert Valve shall conform to the following: The Ductile Iron 250 p.s.i.g. Insert Valve shall be a Resilient Wedge Gate Valve designed for use in potable water,
More informationWhat is pressure relief valve? Pressure relief valve
What is pressure relief valve? Pressure relief valve What is: Relief valve Safety valve Safety relief valve Type of pressure relief valve Pressure relief valve sizing base What are the sizing basis of
More informationPolyethylene Valves for Natural Gas.
Polyethylene Valves for Natural Gas. Providing valves and equipment to the world s energy markets for over 00 years. Polyethylene Valves Made in the U.S.A. The POLYBALL valve is manufactured at our Mansura,
More informationSPWE Series. Setup Instructions. Version 2.0
SPWE Series Integrated Tank Weighing Assembly Setup Instructions Version 2.0 Load Cell Central follows a policy of continuous improvement and reserves the right to change specifications without notice.
More informationTECHNICAL DATA. Q = C v P S
Preaction 346a 1. Description The 6 Model G-6000P Electric Release Preaction System Riser Assembly can be used as a Single Interlock Preaction System with Electric Release, or as a Double Interlock Preaction
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationBUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
More informationModel PRS-07i. Stainless Steel Low Pressure, In-Line Pressure Regulator (Reducing Valve)
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRS-07i Stainless Steel Low Pressure, In-Line Pressure
More informationSEALED CONNECTORS FOR THE LIMIT SWITCHES
SEALED CONNECTORS FOR THE LIMIT SWITCHES LIST OF MODELS / Sealed connectors are used at the cable-connecting section of limit switches. Type and appearance Materials Features Target market Applications
More informationBACK PRESSURE / SUSTAINING
In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. This is the function of the 108 Pressure Relief / Back Pressure Series of the OCV control valves.
More informationBinks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)
INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete
More informationDiaphragm Accumulators
Diaphragm Accumulators HYDAC Diaphragm Accumulators Index Page 1. Description 3 Introduction 3 Construction 3 2. Applications 4 3. Technical Data 6 Operation 6 Technical Specifications 6 Temperature Effect
More informationDECLARATION OF INCORPORATION
AESSEAL (MCK) Ltd. Systems Division 139a Hillsborough Old Road Lisburn Northern Ireland BT27 5QE Tel +44 (0) 2892 669966 Fax +44 (0) 2892 669977 When selecting and installing suitable Barrier Fluid System
More informationPressure Regulator B-95
Pressure Regulator B-95 TYPE B WATER & AIR TYPE B INTERIOR WATER & AIR B SERIES VALVES DESTRIPTION The Cash Valve Series B pressure reducing and regulating valves are single seated, spring loaded, direct
More informationJSHM Series Hand Metering Valves
Hand metering valve for precise manual control of iopharm and Pharmaceutical gas or liquids The JSHM Series allows precision manual adjustment of pharmaceutical liquid and gas flows. These valves are most
More informationMAKING MODERN LIVING POSSIBLE. Pilot operated internal safety valves type POV REFRIGERATION AND AIR CONDITIONING DIVISION.
MAKING MODERN LIVING POSSIBLE Pilot operated internal safety valves type POV REFRIGERATION AND AIR CONDITIONING DIVISION Technical leaflet Contents Page Introduction...3 Features...3 Design...4 Technical
More informationHIGH PRESSURE CONTROL VALVES
METERING VALVE APPLICATIONS: This valve can be used to meter or control flow of liquids and/ or gases on meter runs, flow lines, or may be used as a choke under low pressure drop conditions where freezing
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationSeries V47 Temperature Actuated Modulating Valves
PSC0302 European Refrigeration Controls Catalogue Catalog Section 7 Product Bulletin V47 Series V47 Temperature Actuated Modulating Valves Introduction The V47 modulating water valves regulate the flow
More information