Flow Measurement SITRANS F X

Transcription

1 SITRANS FX00 Overview The main applications of SITRANS FX00 can be found in the following sectors: Chemical Petrochemical Oil & Gas Power plants -Air - Heating - Cooling -Chilling Food & beverage - Pharmaceutical - Sugar refineries - Dairies -Breweries - Production of soft drinks Pulp & paper Water & waste water vortex flowmeters provide accurate volumetric and mass flow measurement of steam, gases and liquids as an all-in-one solution with integrated temperature and pressure compensation. System Overview Version Flange Sandwich Dual transmitter Compact Benefits 2-wire technology with HART communication Integrated temperature compensation for saturated steam as standard feature Integrated temperature and pressure compensation enabling direct measurement of mass, standard volume flow rate and energy One instrument for measuring pressure, temperature and flow. No additional installation of pressure and temperature sensors Maximum process reliability thanks to Intelligent Signal Processing (ISP) - stable readings, free of external disturbances Fully welded stainless steel construction with high corrosion, pressure and temperature resistance Maintenance-free design Ready to use due to plug & play feature Minimal pressure drop Compact or remote design Free Air Delivery (FAD) measurement of a compressor Application The SITRANS FX00 is a flowmeter in a single or dual transmitter version, suitable for measuring industrial steam, gases, as well as conductive and non-conductive liquids, e.g. steam (saturated steam, superheated steam), industrial gases (compressed air, nitrogen, liquefied gases, flue gases), and conductive and non-conductive liquids (demineralized water, boiler feed water, solvents, heat transfer oil). Remote Design SITRANS FX00 vortex flowmeters are available in the following variants: SITRANS FX00 Single transmitter The single transmitter variant exists in flange or sandwich design. In flange design the SITRANS FX00 offers a sensor with integrated nominal diameter reduction up to two nominal diameter sizes. That ensures best results in accuracy and optimal measuring ranges even in pipelines with large diameters, designed for low pressure loss. By forgoing complex pipeline reduction installations, space and cost saving installations can be realized. At the same time the number of potential leakages is reduced to a minimum. The flowmeters in sandwich design will be supplied with additional optimised centring rings. With installation of the centring rings the SITRANS FX00 can be aligned centrically and eliminates any offset between the sensor and the pipeline. The SITRANS FX00 is also available as a remote version. This feature allows separating the transmitter from the sensor up to a distance of 5m (49 ft). The remote mounted transmitter allows easy operation and optimal readability. /44 Siemens FI 0 207

2 The following configurations can be selected for the single transmitter variant: Basic version Suitable for liquids and gases, integrated temperature compensation included as standard for saturated steam With integrated pressure compensation Version with integrated temperature and pressure compensation for gases, wet gases, gas mixtures or steam (energy measurement optional) With integrated pressure compensation and isolation valve Allowing the pressure sensor to be shut off for the purpose of pressure and leak testing of the pipeline or for being exchanged without interrupting the process. Remote version With this version transmitter and sensor are locally seperated. In addition, it offers the same the features as the compact version (integrated temperature and pressure compensation, isolation valve). SITRANS FX00 Dual transmitter This is a genuine redundant system with two independent sensors and transmitters providing twofold functional reliability and availability of the measurement. This variant is optimally suited for measurements in multi-product pipelines. The dual transmitter version is available as: Basic version Suitable for liquids and gases, temperature compensation integrated as standard for saturated steam Function Operating Principle vortex flowmeters measure flow rate by detecting the frequency at which alternating vortices are shed from a bluff body inserted into the flow stream. This principle of measurement is derived from the Karman phenomenon of vortex shedding. The frequency of the alternating vortices is proportional to the flow rate. The passage of a vortex causes a slight stress on a pick-up sensor placed downstream of the bluff body. The stress is detected by piezo-electric crystals placed inside the pick-up sensor. Q d $ = Bluff Body, % = Pick-up The flowmeter calculates the flow velocity using the following equation: Q = A V = A d / St f = 0.9 f / K [m /h] Where: Q = flow rate [m /h] f = vortex shedding frequency [Hz] K = calibration constant [pulses/m ] d = width of the bluff body [m] St = Strouhal Number A = cross-section area [m 2 ] V = flow velocity [m/s] 2 SITRANS FX00 Requirements In order to generate the vortex streets, the medium must have a minimum velocity: For steam and gases, the flow velocity must be 2 to 80 m/s (6.6 to 262 ft/s) For liquids the flow velocity must be 0.4 to 0 m/s (. to 2.8 ft/s) Technical specifications Input Measuring range limits See Dimensional Drawings Media pressure bar ( psi) (Higher pressures on request) Output Current output Measuring range 4 20 ma Over range 20.8 ma % (05% %) Load -min. 00 -max. R max = (U Power Supply - 4 V)/22 ma Error signal NAMUR NE 4 Maximum output 22 ma (2.5 %) Multidrop mode 4 ma Digital output Communication HART Physical layer FSK Device category Transmitter Pulse output Passive pulse output, setting pulse value (meter factor) for totalized flow or heat quantity (energy) with option Y47 (e.g.: pulse/kg or pulse/kwh) Pulse frequency Max. 0.5 Hz Power supply Min. 24 V DC as NAMUR or Non-Ex version open < ma, max. 6 V, closed 00 ma, U < 2 V Ex version open < ma, max. 0 V, closed 00 ma, U < 2 V Accuracy Standard version For liquids -Re % For steam and gases -Re % For steam, gases and liquids < Re < % Pressure and temperaturecompensated version For liquids < Re < % -Re % For gases and steam < Re < % -Re % Repeatability 0. % Installation conditions (At different conditions, e.g. installation after control valve, bends or reductions, please refer to the operating instructions.) Inlet run 20 x DN Outlet run 5 x DN Siemens FI /45

3 SITRANS FX00 Software Uncompensated for liquids and Order option gases, density-compensated by temperature for saturated steam Density-compensated by temperature and pressure for superheated Order option 4 steam Gross heat meter When the thermal energy of steam Order option 5 is to be measured Following information is required at option Y5 to Y56 Density compensated by temperature and pressure for gases, wet gases Wet gases FAD - Free Air Delivery When the delivered air of a compressor is to be measured In Y8 to Y87 add information regarding: Mixed gases Y5 Variable current output: Flow rate, power Y52 Power unit Select one of the following units: kj/h, MJ/h, GJ/h, Btu/h, kcal/h, kw, MW or special (custom) Y5 Fullscale value power Y54 Variable pulse output: Totalized flow, energy Y55 Totalizer on/off Y56 Energy unit Select one of the following units: kj, MJ, GJ, Btu th, kcal, kwh, MWh or special (custom). Order option 7 Select Y49 and enter relative humidity of process medium in % Order option 8 Y8 Inlet suction temperature Y82 Atmospheric pressure Y8 Pressure drop at inlet suction filter Y84 Inlet relative humidity Y85 Actual compressor rotation (rpm) Y86 Rated compressor rotation (rpm) Y87 Relative humidity at compressor output When fluid is a gas mixture, specifiy the single gas components and their amount/concentration in %. Rated operation conditions Ambient temperature Non-Ex version C( F) Ex version C( F) Storage temperature C( F) Media temperature C ( F) Density Taken into consideration when dimensioning Viscosity <0 cp Reynolds number Media pressure limit Max. 00 bar (450 psi) Higher pressure on request (contact your local Siemens representative) Design Material Sensor/Pick-up AISI 6L (.4404)/ AISI 6L (.445) Hastelloy C22/ available on request (contact your local Siemens representative) Transmitter housing Aluminum Sensor gaskets (Pick-up/Pressure sensor) AISI 6L (.445) / FPM or FFKM FPM (Viton) for steam and non-aggressive gases. FFKM (Kalrez) for chlorine and other aggressive gases. (The meter is fitted with FPM/FFKM gasket only when configured with pressure sensor) Process connections Flange norm EN 092- form B/B2 or ANSI B6.5 RF. Other flanges on request (contact your local Siemens representative) Flange version DN5 00 (½ 2") Sandwich version DN5 00 (½ 4") Degree of protection IP66/IP67 Dimensions and weights See Dimensional Drawings Display and operating interface Local display 2 lines, 0 characters per line Languages German, English, French Power supply Standard version 4 6 V DC Ex version 4 0 V DC Certificates and approvals Explosion protection ATEX II 2G EEx d ia [ia] IIC T6 FM US/C Class I, II, III, Div. and 2 Calibration All flowmeters will be delivered with a point calibration certificate Material Certificate Certificate of compliance, pressure test, material certificate, material in acc. of NACE and PMI of pressure bearing metal parts. Cleaning Choose Cleaning Class when fluid is oxygen or contains chloride. Certificates X-ray and dye penetration test on pressure bearing weldings /46 Siemens FI 0 207

4 SITRANS FX00 Valid combinations of sensor/connections size with flange norm/nominal pressure are shown in the following table. Sensor size Connection size EN 092-, Form B/B2, PN 0 EN 092-, Form B/B2, PN 6 EN 092-, Form B/B2, PN 25 SITRANS FX Flanged - Single transmitter (7ME ) DN 5 DN DN DN DN 25 DN DN DN DN 40 DN DN DN DN 50 DN DN DN DN 80 DN DN DN DN 00 DN DN DN DN 50 DN DN DN DN 200 DN DN DN DN 250 DN DN DN 00 DN available - not available EN 092-, Form B/B2, PN 40 EN 092-, Form B/B2, PN 6 EN 092-, Form B/B2, PN 00 ANSI B6.5, class 50 ANSI B6.5, class 00 ANSI B6.5, class 600 Siemens FI /47

5 SITRANS FX00 Selection and Ordering data Article No. Ord. code SITRANS FX00 Flanged 7 M E Single transmitter and T max = 240 C (464 F) Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Sensor size Connection size DN 5 (½") DN 5 (½") A DN 25 (") B DN 40 (½") C DN 25 (") DN 25 (") 2B DN 40 (½") 2C DN 50 (2") 2D DN 40 (½") DN 40 (½") 2K DN 50 (2") 2L DN 80 (") 2M DN 50 (2") DN 50 (2") 2R DN 80 (") 2S DN 00 (4") 2T DN 80 (") DN 80 (") L DN 00 (4") M DN 50 (6") R DN 00 (4") DN 00 (4") S DN 50 (6") T DN 200 (8") Q DN 50 (6") DN 50 (6") 4M DN 200 (8") 4P DN 250 (0") 4Q DN 200 (8") DN 200 (8") 4T DN 250 (0") 4U DN 00 (2") 4V DN 250 (0") DN 250 (0") 4W DN 00 (2") 4Y DN 00 (2") DN 00 (2") 5E Flange norm and nominal pressure Form B/B2 EN 092- PN 0 DN A PN 6 DN B PN 25 DN C PN 40 DN D PN 6 DN E PN 00 DN F RF ANSI B6.5 class 50 ½... 2" J class 00 ½... 2" K class 600 ½... 6" L Sensor material/gasket St. steel AISI 6L (.4404)/AISI 6L (.445)/ FPM St. steel AISI 6L (.4404)/AISI 6L 5 (.445)/ FFKM Transmitter design Compact version - no cable Remote version: 5 m (6.4 ft) 2 0 m (2.8 ft) 5 m (49.2 ft) 4 Selection and Ordering data Article No. Ord. code SITRANS FX00 Flanged 7 M E Single transmitter and T max = 240 C (464 F) Approval and cable gland Non-Ex, M20x.5 Non-Ex, ½ NPT 2 FM approval Class Div. 2, M20 x.5 ATEX, M20 x.5 4 ATEX, ½ NPT 5 FM approval Class Div., M20 x.5 6 FM approval Class Div., /2" NPT 7 FM approval Class Div. 2, /2" NPT 8 Further approvals and cable glands IEC Ex with M20 x.5 9 N 0 A IEC Ex with ½" NPT 9 N 0 B Transmitter, display and communication With display, HART A Pressure sensor and isolation valve Without pressure sensor A With pressure sensor, range: 4 bar (58 psi) B 6 bar (87 psi) D 0 bar (45 psi) E 6 bar (22 psi) G 25 bar (6 psi) H 40 bar (580 psi) K 60 bar (870 psi) L 00 bar (450 psi) N With isolation valve and pressure sensor, range: 4 bar (58 psi) P 6 bar (87 psi) Q 0 bar (45 psi) R 6 bar (22 psi) S 25 bar (6 psi) U 40 bar (580 psi) V 60 bar (870 psi) W 00 bar (450 psi) Y Software Uncompensated for liquids and gases, density compensated by temperature for satu- rated steam Density compensation for superheated 4 steam Density compensated by temperature and 5 pressure for superheated steam, gross heat meter - setting of energy metering at option Y5... Y56 Density compensation for gases, wet gases 7 and mixed gases - setting of relative humidity at option Y49 Density compensation for gases, wet gases 8 and mixed gases, Free air delivery (FAD) - setting of FAD at option Y8... Y87 and relative humidity at option Y49 /48 Siemens FI 0 207

6 Selection and Ordering data Additional information Please add -Z to Article No. and specify as minimum Order code Y40, Y4, Y42 and Y45 and plain text. Input process data Medium: Specify medium (Liquid, gas, steam or customer-specific) Temperature: Specify operating temperature with unit Pressure: Specify operating pressure with unit Density (only for customer-specified medium): Specify density with unit Viscosity (only for customer-specified medium): Specify viscosity with unit Flow rate: Specify max. flow rate with units Setting of pulse output: Specify pulse value (meter factor) for totalized flow or energy ( pulse/unit) Relative humidity of process medium in % Settings of gross heat Variable current output: Flow rate, power Power unit (specify: kj/h, MJ/h, GJ/h, Btu/h, kcal/h, kw, MW or special (custom)) Fullscale value power Variable pulse output: Totalized flow, energy Totalizer on/off Energy unit (specify: kj, MJ, GJ, Btu th, kcal, kwh, MWh or special (custom)) Settings of FAD Inlet suction temperature ) Atmospheric pressure ) Pressure drop at inlet suction filter 2) Inlet relative humidity ) Actual compressor rotation (rpm) 2) Rated compressor rotation (rpm) 2) Relative humidity at compressor outlet 2) Order code Y40 Y4 Y42 Y4 Y44 Y45 Y47 Y49 Y5 Y52 Y5 Y54 Y55 Y56 Y8 Y82 Y8 Y84 Y85 Y86 Y87 ) Required information from customer. 2) Required information from compressor manufacturer (data sheet). Operating instructions Description English German Article No. A5E20042 A5E SITRANS FX00 All literature is available to download for free, in a range of languages, at Selection and Ordering data Further designs Please add -Z to Article No. and specify Order code. Converter housing material Aluminum for increased requirement, color: petrol green Material certificate Certificate of compliance EN Pressure test +. accordance EN 0204 Material certificate of pressure bearing parts + certificate. Material in accordance with NACE MR PMI of pressure bearing metal parts + certificate. Material certificate of pressure bearing parts + PMI + certificate. Calibration certificate FX00 As standard the flow device has a -point calibration certificate. 5-point calibration certificate Hardness test Hardness test on pressure bearing parts + certificate. Cleaning Cleaning class Cleaning class + certificate. acc. EN 0204 Certificates X-ray test on pressure bearing weldings Dye penetration test on pressure bearing weldings Tag name plate Stainless steel tag with mm characters, max. 2 x 8 characters (40 x 20 mm, add plain text) Stainless steel tag with 2.5 mm characters, max. 8 x 40 characters (20 x 46 mm, add plain text) Order code A0 C0 C C2 C C4 C5 D H0 K46 K48 M56 M58 Y7 Y8 Siemens FI /49

7 SITRANS FX00 Selection and Ordering data Article No. Ord. code SITRANS FX00 Sandwich Single transmitter and 7 M E T max = 240 C (464 F) Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Sensor size Connection size DN 5 (½") DN 5 (½") A DN 25 (") DN 25 (") 2B DN 40 (½") DN 40 (½") 2K DN 50 (2") DN 50 (2") 2R DN 80 (") DN 80 (") L DN 00 (4") DN 00 (4") S Nominal pressure Form B/B2 EN 092- PN 6 DN B PN 40 DN D PN 6 DN E PN 00 DN F RF ANSI B6.5 class 50 ½... 4" J class 00 ½... 4" K class 600 ½... 4" L Sensor material/gasket St. steel AISI 6L (.4404)/AISI 6L (.445)/FPM St. steel AISI 6L (.4404)/AISI 6L 5 (.445)/FFKM Transmitter design Compact version - no cable Remote version: 5 m (6.4 ft) 2 0 m (2.8 ft) 5 m (49.2 ft) 4 Approval and cable gland Non-Ex, M20 x.5 Non-Ex, ½ NPT 2 FM approval Class Div. 2, M20 x.5 ATEX, M20 x.5 4 ATEX, ½ NPT 5 FM approval Class Div., M20 x.5 6 FM approval Class Div., /2" NPT 7 FM approval Class Div. 2, /2" NPT 8 Further approvals and cable glands IEC Ex with M20 x.5 9 N 0 A IEC Ex with ½" NPT 9 N 0 B Transmitter, display and communication With display, HART A Selection and Ordering data Article No. Ord. code SITRANS FX00 Sandwich Single transmitter and 7 M E T max = 240 C (464 F) Pressure sensor and isolation valve Without pressure sensor A With pressure sensor, range: 4 bar (58 psi) B 6 bar (87 psi) D 0 bar (45 psi) E 6 bar (22 psi) G 25 bar (6 psi) H 40 bar (580 psi) K 60 bar (870 psi) L 00 bar (450 psi) N With isolation valve and pressure sensor, range: 4 bar (58 psi) P 6 bar (87 psi) Q 0 bar (45 psi) R 6 bar (22 psi) S 25 bar (6 psi) U 40 bar (580 psi) V 60 bar (870 psi) W 00 bar (450 psi) Y Software Uncompensated for liquids and gases, density compensated by temperature for satu- rated steam Density compensation for superheated 4 steam Density compensated by temperature and 5 pressure for superheated steam, gross heat meter - setting of energy metering at option Y5... Y56 Density compensation for gases, wet gases 7 and mixed gases - setting of relative humidity at option Y49 Density compensation for gases, wet gases 8 and mixed gases, Free air delivery (FAD) - setting of FAD at option Y8... Y87 and relative humidity at option Y49 /420 Siemens FI 0 207

8 Selection and Ordering data Additional information Please add -Z to Article No. and specify as minimum Order code Y40, Y4, Y42 and Y45 and plain text. Input process data Medium: Specify medium (Liquid, gas, steam or customer-specific) Temperature: Specify operating temperature with unit Pressure: Specify operating pressure with unit Density (only for customer-specified medium): Specify density with unit Viscosity (only for customer-specified medium): Specify viscosity with unit Flow rate: Specify max. flow rate with units Setting of pulse output: Specify pulse value (meter factor) for totalized flow or energy ( pulse/unit) Relative humidity of process medium in % Settings of gross heat Variable current output: Flow rate, power Power unit (specify: kj/h, MJ/h, GJ/h, Btu/h, kcal/h, kw, MW or special (custom)) Fullscale value power Variable pulse output: Totalized flow, energy Totalizer on/off Energy unit (specify: kj, MJ, GJ, Btu th, kcal, kwh, MWh or special (custom)) Settings of FAD Inlet suction temperature ) Atmospheric pressure ) Pressure drop at inlet suction filter 2) Inlet relative humidity ) Actual compressor rotation (rpm) 2) Rated compressor rotation (rpm) 2) Relative humidity at compressor outlet 2) Order code Y40 Y4 Y42 Y4 Y44 Y45 Y47 Y49 Y5 Y52 Y5 Y54 Y55 Y56 Y8 Y82 Y8 Y84 Y85 Y86 Y87 ) Required information from customer. 2) Required information from compressor manufacturer (data sheet). Operating instructions Description English German Article No. A5E20042 A5E SITRANS FX00 All literature is available to download for free, in a range of languages, at Selection and Ordering data Further designs Please add -Z to Article No. and specify Order code. Converter housing material Aluminum for increased requirement, color: petrol green Material certificate Certificate of compliance EN Pressure test +. accordance EN 0204 Material certificate of pressure bearing parts + certificate. Material in accordance with NACE MR PMI of pressure bearing metal parts + certificate. Material certificate of pressure bearing parts + PMI + certificate. Calibration certificate FX00 As standard the flow device has a -point calibration certificate. 5-point calibration certificate Hardness test Hardness test on pressure bearing parts + certificate. Cleaning Cleaning class Cleaning class + certificate. acc. EN 0204 Certificates X-ray test on pressure bearing weldings Dye penetration test on pressure bearing weldings Tag name plate Stainless steel tag with mm characters, max. 2 x 8 characters (40 x 20 mm, add plain text) Stainless steel tag with 2.5 mm characters, max. 8 x 40 characters (20 x 46 mm, add plain text) Order code A0 C0 C C2 C C4 C5 D H0 K46 K48 M56 M58 Y7 Y8 Siemens FI /42

9 SITRANS FX00 Selection and Ordering data Article No. Ord. code SITRANS FX00 Flanged Dual transmitter and 7 M E T max = 240 C (464 F) Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Sensor size Connection size DN 40 (½") DN 40 (½") 2K DN 50 (2") DN 50 (2") 2R DN 80 (") DN 80 (") L DN 00 (4") DN 00 (4") S DN 50 (6") DN 50 (6") 4M DN 200 (8") DN 200 (8") 4T DN 250 (0") DN 250 (0") 4W DN 00 (2") DN 00 (2") 5E Flange norm and nominal pressure Form B/B2 EN 092- PN 0 DN A PN 6 DN B PN 25 DN C PN 40 DN D PN 6 DN E PN 00 DN F RF ANSI B6.5 class 50 ½... 2" J class 00 ½... 2" K class 600 ½... 6" L Sensor material/gasket Stainless steel AISI 6L (.4404)/ AISI 6L (.445)/FPM Stainless steel AISI 6L (.4404)/ 5 AISI 6L (.445)/FFKM Transmitter design Compact version - no cable Remote version: 5 m (6.4 ft) 2 0 m (2.8 ft) 5 m (49.2 ft) 4 Approval and cable gland Non-Ex, M20 x.5 Non-Ex, ½ NPT 2 FM approval Class Div. 2, M20 x.5 ATEX, M20 x.5 4 ATEX, ½ NPT 5 FM approval Class Div., M20 x.5 6 FM approval Class Div., /2" NPT 7 FM approval Class Div. 2, /2" NPT 8 Further approvals and cable glands IEC Ex with M20 x.5 9 N 0 A IEC Ex with ½" NPT 9 N 0 B Transmitter, display and communication With display, HART A Pressure sensor and isolation valve Without pressure sensor A Software Uncompensated for liquids and gases, density-compensated by temperature for saturated steam Selection and Ordering data Additional information Please add -Z to Article No. and specify as minimum Order code Y40, Y4, Y42 and Y45 and plain text. Input process data Specify medium (Liquid, gas, steam or customer-specific) Temperature: Specify operating temperature with unit Pressure: Specify operating pressure with unit Density (only for customer-specified medium): Specify density with unit Viscosity (only for customer-specified medium): Specify viscosity with unit Flow rate: Specify max. flow rate with units Setting of pulse output: Specify pulse value (meter factor) for totalized flow ( pulse/unit) Relative humidity of process medium in % Operating instructions for SITRANS FX00 Description Article No. English A5E20042 German A5E Order code Y40 Y4 Y42 Y4 Y44 Y45 Y47 Y49 All literature is available to download for free, in a range of languages, at Selection and Ordering data Further designs Please add -Z to Article No. and specify Order code. Converter housing material Aluminum for increased requirement, color: petrol green Material certificate Certificate of compliance EN Pressure test +. accordance EN 0204 Material certificate of pressure bearing parts + certificate. Material in accordance with NACE MR PMI of pressure bearing metal parts + certificate. Material certificate of pressure bearing parts + PMI + certificate. Calibration certificate FX00 As standard the flow device has a -point calibration certificate. 5-point calibration certificate Hardness test Hardness test on pressure bearing parts + certificate. Cleaning Cleaning class Cleaning class + certificate. acc. EN 0204 Certificates X-ray test on pressure bearing weldings Dye penetration test on pressure bearing weldings Tag name plate Stainless steel tag with mm characters, max. 2 x 8 characters (40 x 20 mm, add plain text) Stainless steel tag with 2.5 mm characters, max. 8 x 40 characters (20 x 46 mm, add plain text) Order code A0 C0 C C2 C C4 C5 D H0 K46 K48 M56 M58 Y7 Y8 /422 Siemens FI 0 207

10 SITRANS FX00 SITRANS FX00 spare parts Schematics Description Article No. Electronic Basic D-HART Steam D-HART Gas D-HART Serial number of flow meter must be specified on order. Display A5E0285 A5E02854 A5E A5E A5E Power supply Load - + ma Ampere meter, optional HART A A+ B B+ Connection power supply and HART communication Sensor replacement (incl. seal disc, pickup, O-rings for pickup, and pressure screw DN 5 (incl. ½" socket) DN 25 (incl. " socket) DN A5E A5E0286 A5E02852 DN A5E Pressure sensor replacement (Incl. pressure sensor, DUBOX plug, 2 O-rings and calibration certificate) 4 bar (58 psi) A5E bar (87 psi) A5E Power supply Load ma Ampere meter, optional 4 Counter HART A A+ B B+ 0 bar (45 psi) 6 bar (22 psi) A5E02880 A5E02822 Connection pulse output 25 bar (6 psi) A5E bar (580 psi) A5E bar (870 psi) A5E bar (450 psi) A5E02847 Service Toolbox for programming software (basic, steam and gas); for changing settings and diagnostics Note: Dedicated service training is required. Please contact Customer Support. A5E Connection cable for remote mounting 5 m (49 ft) A5E68200 Siemens FI /42

11 SITRANS FX00 Dimensional drawings Compact version a c b a c b D H H l L d Flange version Flange version with pressure sensor a D H D L d L H Flange version, dual converter /424 Siemens FI 0 207

12 SITRANS FX00 Flange version EN092- Size Pressure a = 5 (5.2), b = 08 (4.26), c = 84 (7.25) Dimensions [mm (inch)] rating DN PN d d FR 2) Weight [kg (lb)] ) d D L H l Flowmeter F2R ) (without pressure sensor) Flowmeter (with pressure sensor) (0.68) (.74) 200 (7.87) 5 (2.40) 44 (5.67) 5.5 (2.) 6. (.45) (0.68) (4.) 200 (7.87) 5 (2.40) 44 (5.67) 6.5 (4.) 7. (5.65) (.2) 7. (0.68) - 5 (4.5) 200 (7.87) 5 (2.40) 44 (5.67) 7. (6.09) 7.9 (7.42) (.2) 7. (0.68) - 40 (5.5) 200 (7.87) 5 (2.40) 44 (5.67) 9. (20.50) 9.9 (2.8) (.70) 28.5 (.2) 7. (0.68) 50 (5.9) 200 (7.87) 20 (2.60) 44 (5.67) 0.2 (22.49) 0.8 (2.8) (.67) 28.5 (.2) 7. (0.68) 70 (6.69) 200 (7.87) 20 (2.60) 44 (5.67) 4.2 (.) 4.8 (2.6) (2.5) 42.5 (.67) 28.5 (.2) 65 (6.50) 200 (7.87) 25 (2.80) 44 (5.67) 2. (26.68) 2.7 (28.00) (2.5) 42.5 (.67) 28.5 (.2) 65 (6.50) 200 (7.87) 25 (2.80) 44 (5.67) 2. (27.2) 2.9 (28.44) (2.5) 42.5 (.67) 28.5 (.2) 80 (7.09) 200 (7.87) 25 (2.80) 44 (5.67) 6. (5.94) 6.9 (7.26) (2.2) 42.5 (.67) 28.5 (.2) 95 (7.68) 200 (7.87) 25 (2.80) 44 (5.67) 7.8 (9.24) 8.4 (40.57) (.25) 54.5 (2.5) 42.5 (.67) 200 (7.87) 200 (7.87) 40 (.9) 54 (6.06) 6.8 (7.04) 7.4 (8.6) (.25) 54.5 (2.5) 42.5 (.67) 200 (7.87) 200 (7.87) 40 (.9) 54 (6.06) 8.8 (4.45) 9.4 (42.77) (.22) 54.5 (2.5) 42.5 (.67) 25 (8.46) 200 (7.87) 40 (.9) 54 (6.06) 22.8 (50.27) 2.4 (5.59) (.9) 54.5 (2.5) 42.5 (.67) 20 (9.06) 200 (7.87) 40 (.9) 54 (6.06) 26.8 (59.08) 27.4 (60.4) (4.22) 80.9 (.9) 54.5 (2.5) 220 (8.66) 250 (9.84) 60 (4.7) 64 (6.46) 2.4 (47.8) 22 (48.50) (4.22) 80.9 (.9) 54.5 (2.5) 25 (9.25) 250 (9.84) 60 (4.7) 64 (6.46) 24.4 (5.79) 25 (55.2) (4.9) 80.9 (.9) 54.5 (2.5) 250 (9.84) 250 (9.84) 60 (4.7) 64 (6.46) 29.4 (64.82) 0 (66.4) (4.) 80.9 (.9) 54.5 (2.5) 265 (0.4) 250 (9.84) 60 (4.7) 64 (6.46) 5.4 (78.04) 6 (79.7) (6.27) 07. (4.22) 80.9 (.9) 285 (.22) 00 (.8) 75 (4.76) 74 (6.85) 5.2 (77.60) 5.8 (78.9) (6.27) 07. (4.22) 80.9 (.9) 00 (.8) 00 (.8) 75 (4.76) 74 (6.85) 4.2 (90.8) 4.8 (92.5) (6.9) 07. (4.22) 80.9 (.9) 45 (.58) 00 (.8) 75 (4.76) 74 (6.85) 59.2 (0.5) 59.8 (.84) (6.07) 07. (4.22) 80.9 (.9) 55 (.98) 00 (.8) 75 (4.76) 74 (6.85) 67.2 (48.5) 67.8 (49.47) (8.) 59. (6.27) 07. (4.22) 40 (.9) 00 (.8) 400 (5.75) 94 (7.64) 7.8 (8.) 8.4 (84.66) (8.) 59. (6.27) 07. (4.22) 40 (.9) 00 (.8) 400 (5.75) 94 (7.64) 7.8 (8.) 8.4 (84.66) (8.) 59. (6.27) 07. (4.22) 60 (4.7) 00 (.8) 400 (5.75) 94 (7.64) 46.8 (0.8) 47.4 (04.50) (8.) 59. (6.27) 07. (4.22) 75 (4.76) 00 (.8) 400 (5.75) 94 (7.64) 54.8 (20.8) 55.4 (22.4) (0.25) (8.) 59. (6.27) 95 (5.55) 80 (4.96) 420 (6.54) 224 (8.82) 57.4 (26.55) 58.0 (27.87) (0.25) (8.) 59. (6.27) 405 (5.94) 80 (4.96) 420 (6.54) 224 (8.82) 58.4 (28.75) 59.0 (0.07) (0.9) (8.) 59. (6.27) 425 (6.7) 80 (4.96) 420 (6.54) 224 (8.82) 74.4 (64.02) 75.0 (65.5) (0.9) (8.) 59. (6.27) 450 (7.72) 80 (4.96) 420 (6.54) 224 (8.82) 92.4 (20.7) 9.0 (205.0) (2.9) (0.25) (8.) 445 (7.52) 450 (7.72) 445 (7.52) 244 (9.6) 75.7 (66.89) 76. (68.2) (2.9) (0.25) (8.) 460 (8.) 450 (7.72) 445 (7.52) 244 (9.6) 82.2 (8.22) 82.8 (82.54) (2.2) (0.25) (8.) 485 (9.09) 450 (7.72) 445 (7.52) 244 (9.6) 98.7 (27.60) 99. (28.92) (2.2) (0.25) (8.) 55 (20.28) 450 (7.72) 445 (7.52) 244 (9.6) 27.5 (28.09) 28. (282.4) ) For dual converter: specified weight kg (6.7 lb). 2) FR - single reduction ) F2R - double reduction Siemens FI /425

13 SITRANS FX00 Flange version ANSI B6.5 Size Pressure a = 5 (5.2), b = 08 (4.26), c = 84 (7.25) Dimensions [mm (inch)] rating DN Class d d FR 2) Weight [kg (lb)] ) d D L H l Flowmeter F2R ) (without pressure sensor) Flowmeter (with pressure sensor) ½ (0.62) (.54) 200 (7.87) 5 (2.40) 44 (5.67) 4.5 (9.92) 5. (.24) ½ (0.62) (.74) 200 (7.87) 5 (2.40) 44 (5.67) 4.9 (0.80) 5.5 (2.) ½ (0.55) (.74) 200 (7.87) 5 (2.40) 44 (5.67) 5. (.24) 5.7 (2.57) (.05) 5.8 (0.62) - 0 (4.) 200 (7.87) 5 (2.40) 44 (5.67) 6.2 (.67) 6.8 (4.99) (.05) 5.8 (0.62) - 25 (4.92) 200 (7.87) 5 (2.40) 44 (5.67) 7.2 (5.87) 7.8 (7.20) (0.96) 5.8 (0.62) - 25 (4.92) 200 (7.87) 5 (2.40) 44 (5.67) 7.5 (6.5) 8. (7.86) ½ (.6) 26.6 (.05) 5.8 (0.62) 25 (4.92) 200 (7.87) 20 (2.60) 44 (5.67) 8. (8.0) 8.9 (9.62) ½ (.6) 26.6 (.05) 5.8 (0.62) 55 (6.0) 200 (7.87) 20 (2.60) 44 (5.67) 0.4 (22.9) (24.25) ½ (.50) 26.6 (.05) 5.8 (0.62) 55 (6.0) 200 (7.87) 20 (2.60) 44 (5.67).4 (25.) 2 (26.46) (2.07) 40.9 (.6) 26.6 (.05) 50 (5.9) 200 (7.87) 25 (2.80) 44 (5.67) (24.25).6 (25.57) (2.07) 40.9 (.6) 26.6 (.05) 65 (6.50) 200 (7.87) 25 (2.80) 44 (5.67) 2.4 (27.4) (28.66) (.94) 40.9 (.6) 26.6 (.05) 65 (6.50) 200 (7.87) 25 (2.80) 44 (5.67).9 (0.64) 4.5 (.97) (.07) 52.6 (2.07) 40.9 (.6) 90 (7.48) 200 (7.87) 40 (.9) 54 (6.06) 9.8 (4.65) 20.4 (44.97) (.07) 52.6 (2.07) 40.9 (.6) 20 (8.27) 200 (7.87) 40 (.9) 54 (6.06) 22.8 (50.27) 2.4 (5.59) (2.90) 52.6 (2.07) 40.9 (.6) 20 (8.27) 200 (7.87) 40 (.9) 54 (6.06) 2.8 (52.47) 24.4 (5.79) (4.0) 78 (.07) 52.6 (2.07) 20 (9.06) 250 (9.84) 60 (4.7) 64 (6.46) 2.4 (5.59) 24 (52.9) (4.0) 78 (.07) 52.6 (2.07) 255 (0.04) 250 (9.84) 60 (4.7) 64 (6.46).4 (69.2) 2 (70.55) (.8) 78 (.07) 52.6 (2.07) 275 (0.8) 250 (9.84) 60 (4.7) 64 (6.46) 40.4 (89.07) 4 (90.9) (6.07) 02.4 (4.0) 78 (.07) 280 (.02) 00 (.8) 75 (4.76) 74 (6.85) 6.2 (79.8) 6.8 (8.) (6.07) 02.4 (4.0) 78 (.07) 20 (2.60) 00 (.8) 75 (4.76) 74 (6.85) 5.2 (2.88) 5.8 (4.20) (5.76) 02.4 (4.0) 78 (.07) 55 (.98) 00 (.8) 75 (4.76) 74 (6.85) 46.2 (0.85) 76.8 (69.) (7.98) 54.2 (6.07) 02.4 (4.0) 45 (.58) 00 (.8) 400 (5.75) 94 (7.64) 50.0 (0.2) 50.6 (.55) (7.98) 54.2 (6.07) 02.4 (4.0) 80 (4.96) 00 (.8) 400 (5.75) 94 (7.64) 74.8 (64.9) 75.4 (66.2) (0.02) (7.98) 54.2 (6.07) 405 (5.94) 80 (4.96) 420 (6.54) 224 (8.82) 74.4 (64.02) 75.0 (65.5) (0.02) (7.98) 54.2 (6.07) 455 (7.9) 80 (4.96) 420 (6.54) 224 (8.82) 06.4 (24.57) 07.0 (25.89) (2.00) (0.02) (7.98) 485 (9.09) 450 (7.72) 445 (7.52) 244 (9.6) 06. (24.5) 06.9 (25.67) (2.00) (0.02) (7.98) 520 (20.47) 450 (7.72) 445 (7.52) 244 (9.6) 5. (.56) 5.9 (4.88) ) For dual converter: specified weight kg (6.7 lb). 2) FR - single reduction ) F2R - double reduction /426 Siemens FI 0 207

14 SITRANS FX00 a c b a c b H D D H l L d L d Sandwich version Sandwich version EN Sandwich version with pressure sensor Size Pressure rating Dimensions [mm (inch)] DN PN a b c d D L H l Flowmeter (without pressure sensor) Weight [kg (lb)] Flowmeter (with pressure sensor) (5.24) 05 (4.) 79 (7.05) 6 (0.6) 45 (.77) 65 (2.56) 265 (0.4) 44 (5.67).5 (7.72) 4. (9.04) (5.24) 05 (4.) 79 (7.05) 24 (0.94) 65 (2.56) 65 (2.56) 265 (0.4) 44 (5.67) 4. (9.48) 4.9 (0.80) (5.24) 05 (4.) 79 (7.05) 8 (.50) 82 (.2) 65 (2.56) 270 (0.6) 44 (5.67) 4.9 (0.80) 5.5 (2.) (5.24) 05 (4.) 79 (7.05) 50 (.97) 02 (4.02) 65 (2.56) 275 (0.8) 44 (5.67) 6 (.2) 6.6 (4.55) (5.24) 05 (4.) 79 (7.05) 74 (2.9) 5 (5.) 65 (2.56) 290 (.42) 55 (6.0) 8.2 (8.08) 8.8 (9.40) (5.24) 05 (4.) 79 (7.05) 97 (.82) 58 (6.22) 65 (2.56) 0 (2.20) 64 (6.46) 9.5 (20.94) 0. (22.27) Sandwich version ANSI Size Pressure rating Dimensions [inch] Weight [lb] DN Class a b c d D L H l Flowmeter Flowmeter (without (with pressure pressure sensor) sensor) ½" 50, 00, " 50, 00, ½" 50, 00, " 50, 00, " 50, 00, " 50, 00, Siemens FI /427

15 SITRANS FX00 Remote version Flanged version DN ½" " ½" 2" " 4 " 6" 8" 0" 2" a [mm] [inch] b c d e f g h j k l m n p [mm] 40 Ø Ø5 Ø9 (4x) [inch] 5.52 Ø Ø4.5 Ø0.6 (4x) Sandwich version DN ½" " ½" 2" " 4 " a [mm] [inch] b c d e f g h j k l m n p [mm] 40 Ø Ø5 Ø9 (4x) [inch] 5.52 Ø Ø4.5 Ø0.6 (4x) /428 Siemens FI 0 207

16 SITRANS FX00 Flow tables Measuring Range Limits Water Size Q min Q max Q min Q max DN to EN 092- DN to ANSI B6.5 EN 092- [m /h] EN 092- [m /h] ANSI B6.5 [m /h] ANSI B6.5 [m /h] 5 ½" " ½" " " " " " " " Values based on water at 20 C (68 F) Air Size Q min Q max Q min Q max DN to EN 092- DN to ANSI B6.5 EN 092- [m /h] EN 092- [m /h] ANSI B6.5 [m /h] ANSI B6.5 [m /h] 5 ½" " ½" " " " " " " " Values based on air at 20 C (68 F) and.0 bar abs (4.7 psi abs ) Flow rate limits Product Nominal diameters Minimum flow rates Maximum flow rates to EN to ANSI [m/s] [m/s] Liquids DN 5 DN 00 DN ½" DN 2" 0.5 x (998/) 0.5 ) 7 x (998/) 0.47 ) Gas, steam/vapor DN 5 DN 00 DN ½" DN 2" 6 x (.29/) 0.5 2) 7 x (998/) 0.47 ) = operating density [kg/m ] ) Minimum flow rate 0. m/s (0.984 ft/s), maximum flow rate 7 m/s (2 ft/s) 2) Minimum flow rate 2 m/s (6.6 ft/s) ) Maximum flow rate 80 m/s (262 ft/s); DN 5: 45 m/s (48 ft/s) and DN 25: 70 m/s (20 ft/s) Siemens FI /429

17 SITRANS FX00 Measuring range saturated steam: to 7 bar Overpressure [bar] Density [kg/m³] Temperature [ C] Flow [kg/h] min. max. min. max. min. max. min. max. DN to EN 092- DN to ANSI B6.5 5 ½" " ½" " " " " " " " Measuring range saturated steam: 0.5 to 20 bar Overpressure [bar] Density [kg/m³] Temperature [ C] Flow [kg/h] min. max. min. max. min. max. min. max. DN to EN 092- DN to ANSI B6.5 5 ½" " ½" " " " " " " " /40 Siemens FI 0 207

18 Measuring range saturated steam: 5 to 00 psig Overpressure [psig] Density [lb/ft³] Temperature [ F] SITRANS FX00 Flow [lb/h] min. max. min. max. min. max. min. max. DN to EN 092- DN to ANSI B6.5 5 ½" " ½" " " " " " " " Measuring range saturated steam: 50 to 00 psig Overpressure [psig] Density [lb/ft³] Temperature [ F] Flow [lb/h] min. max. min. max. min. max. min. max. DN to EN 092- DN to ANSI B6.5 5 ½" " ½" " " " " " " " Siemens FI /4