Bourdon tube pressure gauges with glycerine filling, for chemical applications EN 837-1
|
|
- Branden Singleton
- 6 years ago
- Views:
Transcription
1 Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres. For measurement in areas subject to high vibration levels and high, dynamic pressure loads.! When measuring gas or vapour, the instruments must be used in accordance with the safety recommendations of EN (see appendix). Type D 7 Nominal size Accuracy class (EN 837-1/6) 1.6 Ranges (EN 837-1/5) NG 50: -1/0 to -1/+ bar 0/0.6 to 0/600 bar NG 63: -1/0 to -1/+ bar 0/0.6 to 0/1,000 bar Application area Static load: 3/4 x full scale value Dynamic load: 2/3 x full scale value Short term: full scale value Operating temperature range Medium: T max = +0 C Ambient: T min = -20 C T max = +60 C Temperature performance Indication error when the temperature of the measuring element deviates from 20 C: rising temp. approx. ±0.4 %/ K falling temp. approx. ±0.4 %/ K percentage of full scale value Protection IP 65 (EN 629) with housing vent (< 25 bar) IP 54 Standard version Connection Stainless steel 316 Ti or 316 L NG 50 bottom or bottom back NG 63 bottom or centre back G 1 /4B spanner size (EN 837-1/7.3) Measuring element Bourdon tube, stainless steel 316 Ti or 316 L < 60 bar C type bourdon tube > 60 bar helical tube leak tested (EN 837-1/9.5.6) Movement Stainless steel Dial Aluminium, white Dial marking black Pointer Aluminium, black Housing Stainless steel 3 with pressure relief port Crimped bezel Stainless steel 3 Front glass NG 50 plastic NG 63 laminated safety glass Filling liquid Glycerine (99.5 %) Options Filling liquid silicone oil Plastic front glass (NG 63) Brass movement Back flange (NG 63) Clamp fixing 3-hole fixing, panel mounting bezel, (NG 63) Crimped bezel, polished Special scales Refer to page 317 for prices Division II 3
2 Bourdon tube pressure gauges with glycerine filling, for chemical applications Type D 7 NG 50/63 Housing types and dimensions Bottom connection NG 50/63 Bottom connection, back flange, NG 63 Centre or bottom back connection NG 63 NG 50 Centre or bottom back connection, 3-hole fixing, panel mounting bezel NG 63 NG 50 Centre back connection, clamp fixing, NG 63 Plastic tightening tool Bottom back connection, clamp fixing, NG 50 Dimensions (mm) Nominal size (NG) a a1 b b1 Øc c1 c2 d1* d2* d3* d4 D e G g h m n s s1 s G 1 /4B G 1 /4B Nominal size (NG) SW * Dimensions according to DIN Division II
3 DG: M Type RF50ChGly,D7 RF50ChGly,D7 RF50ChGly,D752 RF63ChGly,D7 RF63ChGly,D7 RF63ChGly,D732 RF63ChGly,D752 Version Housing-Ø Housing Stainless steel 3 with crimped bezel 3 Meas. elem. Bourdon tube, stainless steel 316 Ti or 316 L Accuracy class Connection G 1 /4B G 1 /4B G 1 /4B G 1 /4B G 1 /4B G 1 /4B G 1 /4B Range (bar) -1/ /+0, /+1, / / / / hole fixing, panel Clamp fixing mounting bezel, 3, Clamp fixing bare metal surface Part no. Part no. Part no. Part no. Part no. Part no. Part no. 0/0, / /1, /2, / / / / / / / / / / / / / Refer to page 326 for additional costs Division II 317
4 Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres. For measurement in areas with high vibration levels and high, dynamic pressure loads.! When measuring gas or vapour, the instruments must be used in accordance with the safety recommendations of EN (see appendix). Type D 8 Nominal size Accuracy class (EN 837-1/6) 1.0 Ranges (EN 837-1/5) -1/0 to -1/+ bar NG 0 0/0.6 to 0/1,000 bar NG 160 0/0.6 to 0/1,600 bar Application area Static load: < 600 bar = full scale value > 600 bar = 3 /4 x full scale value Dynamic load: < 600 bar = 0.9 x full scale value > 600 bar = 2 /3 x full scale value Short term: < 600 bar = 1.3 x full scale value > 600 bar = full scale value Operating temperature range Medium: T max = +0 C Ambient: T min = -20 C T max = +60 C Temperature performance Indication error when the temperature of the measuring element deviates from 20 C: rising temp. approx. ±0.4 %/ K falling temp. approx. ±0.4 %/ K percentage of full scale value Protection IP 65 (EN 629) with housing vent (< 25 bar) IP 54 Standard version Connection Stainless steel 316 Ti or 316 L, bottom or bottom back G 1 /2B- spanner size 22 (EN 837-1/7.3) Measuring element Bourdon tube, stainless steel 316 Ti or 316 L < 60 bar C type bourdon tube > 60 bar helical tube leak tested (EN 837-1/9.5.6) Movement Stainless steel Dial Aluminium, white Dial marking black Pointer Aluminium, black Housing Stainless steel 3 with blow-out Bayonet type bezel Stainless steel 3 Front glass Laminated safety glass Filling liquid Glycerine (99.5 %) Options Filling liquid silicone oil Brass movement Back flange Panel mounting bezel for clamp fixing 3-hole fixing, panel mounting bezel Special scales 318 Division II Refer to page 320 for prices
5 filling, for chemical applications Type D 8 NG 0/160 Housing types and dimensions Bottom connection Bottom connection, back flange Bottom back connection Bottom back connection, 3-hole fixing, panel mounting bezel Bottom back connection, panel mounting bezel for clamp fixing Dimensions (mm) Nominal size (NG) a a1 b b1 b2 b3 Øc c1 c2 d1* d2* d3* d4 d5 d6 e G g g1 h s G 1 /2B G 1 /2B Nominal size (NG) s2 s3 s4 SW * Dimensions according to DIN 164 Division II 319
6 DG: M Type Version RF0ChGly, RF0ChGly, RF0ChGly, RF0ChGly, RF160ChGly, RF160ChGly, RF160ChGly, RF160ChGly, D8 D8 D832 D852 D8 D8 D832 D852 Housing-Ø Housing Stainless steel 3 with bayonet type bezel, laminated safety front glass Meas. elem. Bourdon tube, stainless steel 316 Ti or 316 L Accuracy class Connection G 1 /2B G 1 /2B G 1 /2B G 1 /2B G 1 /2B G 1 /2B G 1 /2B G 1 /2B Range (bar) -1/ /+0, /+1, / / / / /0, / /1, /2, / / / / / / / / / / / hole fixing, panel Panel mounting 3-hole fixing, panel Panel mounting mounting bezel, bezel, 3 polished mounting bezel, bezel, 3 polished 3 polished clamp fixing 3 polished clamp fixing Part no. Part no. Part no. Part no. Part no. Part no. Part no. Part no. 0/ / / Division II Refer to page 326 for additional costs
Bourdon tube pressure gauges for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres.! When measuring gas or vapour, the instruments must be
More informationOil Solutions. Pressure Gauges & Test Kits. Local solutions for individual customers worldwide
Oil Solutions Pressure Gauges & Test Kits Local solutions for individual customers worldwide www.oilsolutions.com.au sales@oilsolutions.com.au Stauff Pressure Gauges SPG 63mm and 100mm SPG-63-SB SPG-63-RB
More informationExpansion Thermometers Stainless Steel Series, Model 70
Mechanical Temperature Measurement Expansion Thermometers Stainless Steel Series, Model 70 WIKA Data Sheet TM 81.01 Applications General-purpose temperature measuring instruments for gaseous, liquid and
More informationBourdon tube pressure gauge, stainless steel For extremely low ambient temperatures down to -70 C Model PG23LT, with case filling
Pressure Bourdon tube pressure gauge, stainless steel For extremely low ambient temperatures down to -70 C Model PG23LT, with case filling WIKA data sheet PM 02.22 for further approvals see page 3 Applications
More informationDifferential pressure gauge For the process industry Model , all-metal media chamber
Pressure Differential pressure gauge For the process industry Model 732.51, all-metal media chamber WIKA data sheet PM 07.05 for further approvals see page 4 Applications For gaseous and liquid aggressive
More informationNominal size dim 63mm. Option with case dim 50 mm. Aluminium, white with black lettering
Ed.17.01 Application Industrial pressure gauge with liquid filling. Intented where pulsation or vibration exists. Suitable for media that will not attack copper alloy parts Design EN 837-1 Series Serie
More informationAluminium, white with black lettering. Bar. Option with unit bar/pa, bar/psi, kpa, MPa, psi
Ed.17.01 Application Industrial pressure gauge with liquid filling. Intented where pulsation or vibration exists. Suitable for media that will not attack copper alloy parts Design EN 837-1 Series Serie
More informationMechanical Pressure Measurement
Mechanical Pressure Measurement Differential Pressure Gauges Model GDP, Universal Version, with Diaphragm Element High Overpressure Safety PN 40, 100, 250 or 400 Applications Differential pressure measurement
More informationNew! SOLFRUNT 659 Stainless Steel Pressure Gauges. Process Gauges A18
A18 New! DESCRIPTION When safety is your top priority, AMETEK U.S. Gauge offers the new Model 659 Series SOLFRUNT Gauges. The Model 659 provides users with a solid-front and pressure-relieving back design
More informationSOLFRUNT Model /2" (63mm) and 4" (100mm) Stainless Steel Gauges
LFG - 14 LIQUID FILLED GAUGES SOLID FRONT STYLE SOLFRUNT Model 659 2-1/2" (63) and 4" (100) Stainless Steel Gauges DESCRIPTION When safety is your top priority, AMETEK U.S. Gauge offers the Model 659 Series
More informationProduct Catalogue. P-SERIES Pressure Gauges
Product Catalogue P-SERIES Pressure Gauges 2 3 CONTENT INTRODUCTION PRESSURE GAUGES...4 P-SERIES (Gauges for Pressure and Vacuum)...6-25 P-SERIES Model P1 (Stainless Steel Bourdon-Tube Pressure Gauge)...6
More informationBourdon tube pressure gauges for chemical applications EN 837-1
Bourdon tube Pressure gauges for chemcal applcatons EN 837-1 For chemcal and process engneerng applcatons Measurng system fully welded to housng Extremely robust desgn For temperatures of the medum of
More informationBOSHART INDUSTRIES Telephone: Toll Free: Fax:
6-1 Steel Case Application: General Purpose - not for use with oxygen Accuracy: 3%-2%-3% Grade B Operating Temperature: 32 F-104 F (0 C-40 C) Window: Acrylic Connection: Brass Bourdon Tube PRESSURE GAUGES
More informationBourdon tube pressure gauges for industrial applications EN 837-1
Pressure gauges Bourdon tube for ndustral applcatons EN 837-1 For machne and plant engneerng Robust steel or stanless steel housng Many customsed versons avalable A Page 386 Applcaton For gaseous and lqud
More informationBourdon tube pressure gauges for chemical applications (glycerine filling) EN 837-1
Bourdon tube Pressure gauges Bourdon tube pressure gauges for chemcal applcatons (glycerne fllng) EN 837-1 For chemcal and process engneerng applcatons Measurng system fully welded to housng Extremely
More informationBourdon tube pressure gauges for chemical applications with glycerine filling
Bourdon tube Bourdon tube pressure gauges for chemcal applcatons wth glycerne fllng EN 837- For chemcal and process engneerng applcatons Measurng system fully welded to housng Extremely robust desgn Can
More informationModel /2" (63mm), 4" (100mm) and 6" (160mm) Open Front Stainless Steel Gauges
LFG - 8 LIQUI FILL GAUGS OPN FRONT STYL Model 656 (63), 4" (100) and 6" (160) Open Front Stainless Steel Gauges SCRIPTION The 656 Series are suitable for corrosive environments in chemical, petrochemical,
More informationBOSHART INDUSTRIES Telephone: Toll Free: Fax:
BOSHART INDUSTRIES 6-1 March 21/11 Steel Case Application: General Purpose - not for use with oxygen Accuracy: 3%-2%-3% Grade B Operating Temperature: 32 F-104 F (0 C-40 C) Window: Acrylic Connection:
More informationBourdon tube pressure gauges for industrial applications
Pressure gauges Bourdon tube for ndustral applcatons EN 837- For machne and plant engneerng Robust steel or stanless steel housng Many customsed versons avalable A Page 54 Applcaton For gaseous and lqud
More informationBuying more than 11 gauges? Call Lesman for additional discounts.
Low Cost Liquid Filled Pressure Gauges Size: 1.5", 2", and 2.5" Accuracy: 2.5% of full scale Materials: Case and ring: 304 stainless steel; Window: Polycarbonate; Seals: Buna-N; Pointer: Black-finished
More informationBourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type
Mechanical Pressure Measurement Bourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type 230.25 WIKA Datasheet 230.25 Applications Semiconductor and electronic industry, medical industry, gene
More informationDiaphragm monitoring system with threaded connection For the chemical and petrochemical industries Model DMS34
Pressure Diaphragm monitoring system with threaded connection For the chemical and petrochemical industries Model DMS34 WIKA data sheet DS 95.18 Applications Chemical/petrochemical industry, oil/gas industries
More informationPressure gauges EN All stainless steel construction PBX100, PBX150 (1.18) Functional and constructive characteristics
Pressure gauges FT PBX 100-150-E-9.02 All stainless steel construction PBX100, PBX150 (1.18) EN 837-1 These instruments are designed for use in food, beverage, pharmaceutical, cryogenics, chemical and
More informationBDT20 Safety process pressure gauge 100 & 160mm
BDT20 Safety process pressure gauge 100 & 160mm Product description Badotherm pressure gauge model BDT20 is the solid front, safety pattern gauge according the highest class of the EN 837-1 / 9.7.2 and
More informationInstrumentation Catalogue
Hydraulic & Offshore Supplies Instrumentation Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Hydraulic & Of f shore Supplies Specialist
More informationNotes on equipment protection to DIN EN and NEMA
Technical information Notes on equipment protection to DIN EN 60529 and NEMA WIKA data sheet IN 00.18 General information This technical information describes the measures to prevent both the formation
More informationNotes on equipment protection per EN/IEC and NEMA For Bourdon tube or diaphragm pressure gauges
Technical information Notes on equipment protection per EN/IEC 60529 and NEMA For Bourdon tube or pressure gauges WIKA data sheet IN 00.18 General information This technical information describes the measures
More informationMEASURING INSTRUMENTS - STRUMENTI PER MISURARE
MEASURING INSTRUMENTS - STRUMENTI PER MISURARE SPECIAL PRESSURE GAUGE MN9 capsule pressure gauges DS 2.5 (63mm) PED 201/68/UE For measurement of low pressure and vacuum, for use on gas and dry air. 2.09.1
More informationPressure gauges EN Safety pressure gauges solid-front PBXSF100, PBXSF150 (1.20) Functional and constructive characteristics
Pressure gauges FT PBXSF 100-150-E-9.02 Safety pressure gauges solid-front PBXSF100, PBXSF150 (1.20) EN 837-1 These Solid-Front instruments are built in accordance with safety specifications of EN 837.1
More informationPressure Gauges. Version 2018 Revised 01/2018
Pressure Gauges Version 2018 Revised 01/2018 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN 55447
More informationBourdon tube pressure gauge for diaphragm seals
Bourdon tube pressure gauge for diaphragm seals and switch function, Type series BR42.. Features Bourdon tube pressure gauge for diaphragm seal and switch function Nominal range -1 3 bar to -1 15 bar,
More informationStandard Bourdon tube pressure gauges EN 837-1
Bourdon tube Pressure gauges Standard Bourdon tube pressure gauges EN 837-1 For pneumatc and heatng system applcatons (e. g. pressure reducers, water flters) Desgn as per EN 837-1 Accuracy class 1.6 Corroson-resstant,
More informationMcDaniel. General Service Gauges. (Brass Internals) Stainless Steel Case 1 1 /2 and 2 1 /2 Gauges. All Brass 2 and 2 1 /2 Gauges M C
cdaniel General Service Gauges (Brass Internals) Polyamid B ase (Fiberglass reinforced) 4 and 6 Gauges Stainless Steel ase 1 1 /2 and 2 1 /2 Gauges All Brass 2 and 2 1 /2 Gauges cdaniel General Service
More informationGas density monitor With integrated transmitter Model GDM-100-TI
SF 6 gas solutions Gas density monitor With integrated transmitter Model GDM-100-TI grid Products WIKA data sheet SP 60.05 for further approvals see page 5 Applications Gas density monitoring of closed
More informationPressure switch with bourdon tube
Pressure switch with bourdon tube for plants requiring special supervision,type series BN4 Features Pressure switch with bourdon tube for plants requiring special supervision, Nominal ranges -1...0 bar
More informationPressure and Temperature Gauges
Pressure and Temperature Gauges 8 10 12 14 Products Stock and Availability Pressure Gauges Pressure Gauges - Glycerine Filled Dial Thermometers Combination Gauges Cocks and Syphons Industrial Thermometers
More informationHigh Precision Gauge Pressure Indicators
Series 1500 8½" Dial High Precision Gauge Pressure Indicators Series 1500 Gauges have capsule-type pressure elements up to and including the 150-psig range. Ranges of 200 psig and above have Bourdon tubes.
More informationGas Pressure Regulator HON 505
product information serving the gas industry worldwide Application, Characteristics, Technical Data Application for gas supply for natural gas and all non-corrosive gaseous media Characteristics compact
More informationPRESSURE & TEMPERATURE GAUGES PRESSURE TEMPERATURE. Catalogue H20200a
PRESSURE & TEMPERATURE GAUGES PRESSURE Catalogue TEMPERATURE Applications The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies.
More informationInstruction Manual. CG16K Barometrically Compensated Capsule Dial Gauge. CG16K Capsule Dial Gauge, 0 to 25 mbar
Instruction Manual D356-10-880 Issue G Original CG16K Barometrically Compensated Capsule Dial Gauge Description CG16K Capsule Dial Gauge, 0 to 1040 mbar CG16K Capsule Dial Gauge, 0 to 125 mbar CG16K Capsule
More informationSeries 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve
Series Self-operated Pressure Regulators Type -6 B Excess Pressure Valve Application Set points from 0.2 to 20 bar with valves G ½, G ¾, and G as well as DN, DN 2, DN 0, and DN 0 Nominal pressure PN 2
More informationInstruction Manual Contact Pressure Vacuum Gauge
MS10 Instruction Manual Contact Pressure Vacuum Gauge Table of Contents 1. Safety Instructions 2. Intended Applications 3. Product Description and Functions 4. Installation 5. Commissioning 6. Maintenance
More informationTechnical Data Sheet T 2025
Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe
More informationInstallation and Maintenance Instruction Manual
Installation and Maintenance Instruction Manual Bourdon tube pressure gauge, model T5400, T5500 and T6500 for industrial application In the following configuration: ###T5400### bourdon tube pressure gauge
More informationPKP Prozessmesstechnik GmbH. Borsigstrasse 24. D Wiesbaden-Nordenstadt. Tel: / Fax: / Operating Instructions
PKP Prozessmesstechnik GmbH Borsigstrasse 24 D-65205 Wiesbaden-Nordenstadt Tel: 06122 / 7055-0 Fax: 06122 / 7055 50 Operating Instructions PMR02 / PMR04 Bourdon Tube Pressure Gauge Contents 1 Introduction
More informationModel 4000 Pressure Controller
FEATURES Multiple Configurations The 4000 series pressure controller can be configured into either proportional only or proportional plus reset mode with a minimum of parts. Rugged Design Die cast aluminum
More informationFILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2
FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel L Compact /, High Flow / - / Air service equipment Series FEATURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment
More informationPKP Prozessmesstechnik GmbH. Borsigstrasse 24. D Wiesbaden-Nordenstadt. Tel: / Fax: / Operating Instructions
PKP Prozessmesstechnik GmbH Borsigstrasse 24 D-65205 Wiesbaden-Nordenstadt Tel: 06122 / 7055-0 Fax: 06122 / 7055 50 Operating Instructions PMR02 / PMR04 Bourdon Tube Pressure Gauge Contents 1 Introduction
More informationRoyal Process Gauges, ±0.5% Accuracy 316 SS Tube and Socket Dial Size
Dial Sizes: 4 1 /2 Case: Standard with style #2 case; Polypropylene safety case (solid front, blow-out back) suitable for surface or direct mounting. 11 Bourdon Tube: 316 stainless steel Socket: 316 stainless
More informationLevel transmitter LT 100
KROHNE 09/2001 7.02363.21.00 GR/PRINTO Level transmitter LT 100 Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationPressure Equalising Valves Model , for Differential Pressure Gauges
Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to
More informationPressure Measurement Single-range transmitters for general applications
Siemens A 207 Overview Application The SITRANS P Compact pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials
More informationFeatures. Up to 6 switch points Minimum degree of protection IP65 Optional temperature sensor PT1000 or thermostat Potted electrical contacts
FLOAT LEVEL SWITCH The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement the genuine Trafag
More informationInstallation and Maintenance Instructions for F5509/F6509 Differential Pressure Gauges
Differential pressure gauge, model F5509/F6509 for industrial applications in the following configuration: F5509/F6509 differential pressure gauge without switching contact F5509/F6509 differential pressure
More informationSITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
More informationJUMO dtrans p30 Pressure Transmitter
609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 Phone: +44 179 6 55 Data Sheet 40466 Page 1/6 JUMO dtrans p0 Pressure Transmitter General application Pressure
More informationMaximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications
Outstanding performance in extremely low pressure and low pressure ranges from 0.003 to. Realizing high performance, energy saving, and compact size. Realize precise pressure control in a pressure range
More informationInstallation and Operating Instructions Bourdon Tube Pressure Gauge RSCh/RSChOe with integrated Pressure Transmitter DMU
Contents page 1 of 10 1. Important Information in Advance p. 1 2. Safety Information p. 1 3. Description, Application p. 3 4. Technical Data p. 7 5. Installation p. 8 6. Storing and Transport p. 9 7. Maintenance
More informationProduct information. Capacitive. Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69. Document ID: 29983
Product information Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69 Document ID: 29983 Contents Contents 1 Description of the measuring principle... 3 2 Type overview...
More informationElectro Controls. Pressure WattsIndustries.co.uk
Electro Controls Pressure - 07 WattsIndustries.co.uk PRESSURE AIR DIFFERENTIAL PRESSURE SWITCHES EDA.. EFS.. To monitor air flow, dirty filters, flue draught, frost on coils & level. For positive, negative,
More informationGA24 Technical Datasheet
GA24 Technical Datasheet Variable-area flowmeter Sturdy construction for several applications Local indication without auxiliary power Replaceable mounting parts KROHNE CONTENTS GA24 1 Product features
More informationPressure measurement. Pressure gauges
Pressure gauge Pressure measurement There are four types of pressure measurements: Measurement of absolute pressure : Measurements are made with respect to absolute pressure, for example as with atmospheric
More information4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
More informationPressure Measurement. Transmitters for basic requirements SITRANS P Z for gauge pressure. 2/4 Siemens FI Overview
f gauge pressure Siemens AG 010 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
More informationBourdon tube pressure gauges for chemical applications with electrical contact
Electrcal contacts chemcal applcatons wth electrcal contact Measurng system fully welded to housng Robust mechatroncal pressure gauge Up to three contacts Tghtness-tested wth helum GOSSTNDRT-certfed Page
More informationMounting and Operating Instructions EB 9520 EN. Differential Pressure and Flow Meter Media 05
Differential Pressure and Flow Meter Media 05 Fig. 1 Media 05, indicating unit with differential pressure cell, with valve block and pressure gauge (right) Mounting and Operating Instructions EB 9520 EN
More informationC-Flow Coriolis Mass Flow Meters
Coriolis Mass Flow Meters Ready for Take Off The New Compact C-Flow Küppers Elektromechanik GmbH The C-Flow The C-Flow Coriolis Mass Meters consist of two components: KCE Transmitter KCM Transducer 2 KEM
More informationPressure Transmitter P41
SENSORS FOR AND BIOPHARMA. Product Information P41 Pressure Transmitter P41 Application/Specified usage Pressure measurement in pipes and tanks For process temperatures up to 250 C (428 F) with optional
More informationNeotecha SAPRO - Aseptic sampling valve SV Installation, operation and maintenance instructions
Before installation these instructions must be fully read and understood 2 Safety Please read these instructions carefully. 2.1 General danger potential Not paying attention to this instruction Incautious
More informationTechnical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
More informationAccu-Drive Pressure Gauges
Accu-Drive Gauges DIRECT DRIVE TECHNOLOGY Direct Drive Concept At 3D Instruments, we believe that simple is beautiful!! Replacing the antiquated C-shaped bourdon tube in our Accu-Drive gauges is a unique
More informationCompact differential pressure switch Flameproof enclosure Ex d Models DE, DEC
Mechatronic pressure measurement Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC WIKA data sheet PV 35.41 Process Compact Series Applications Differential pressure monitoring
More informationAISI 304 SS (Rolling Type), Bayonet type for NS 80 mm Copper Alloy Copper Alloy Copper Alloy Alloy Brazing / Soldering
aumer T Case rass Pressure Gauge ourdon type pecial Features tainless steel case Rugged construction Dry or liquid filled tandard followed in general N 837-1 pplication Oil Water Pneumatics Hydraulics
More informationPneumatic pressure switch 20DD
Sensor system: stainless steel 0,2 to 6 bar Microswitch with gold plated contacts (suitable for intrinsically safe operation) High accuracy (max. scattering < 1,5%) Excellent sealing properties (better
More informationPrecision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
More informationPressure Switches Application Guideline
Pressure Switches Application Guideline Product Overview The Fema Pressure Switch product portfolio provides devices suitable for many applications. The portfolio contains Special functions and equipment
More informationExpert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
More informationUser guide DIAPHRAGM SEALS. Industrial instrumentation for Pressure and Temperature
Industrial instrumentation for Pressure and Temperature ENG MI-SEP-ENG_0 10/2011 Copyright Nuova Fima S.p.A. All rights reserved. Any part of this publication should not be reproduced without a written
More informationCertified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters
www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters Description The Tricor Mass Flow Meters measure simultaneously mass
More informationNote: the lock-out circuit must be in accordance with Section 8.7 of DIN/VDE Twin thermostats ATH.-SW-2020 ATH.-SW-2070 ATH.
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 3603 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-60 E-mail: mail@jumo.net Internet: www.jumo.net
More informationInstruction Manual Contact Pressure Gauge
MS11 Instruction Manual Contact Pressure Gauge Table of Contents 1. Safety Instructions 2. Intended Applications 3. Product Description and Functions 4. Installation 5. Commissioning 6. Maintenance 7.
More informationDMK 458. Pressure Transmitter for Marine and Offshore. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.25 % FSO option: 0.
Pressure Transmitter for Marine and Offshore Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0. % FSO Nominal pressure from 0... 40 mbar up to 0... 0 bar Output signals -wire:
More informationVariable Area Flow Meters. VS Series
Variable Area Flow Meters VS Series Precise measuring in water flow Design and function VS series fl ow meters operate with the fl oat principle. A fl oat is located in a conical plastic tube. The fl oat
More informationInstruction Manual SB02, SB03, SB04 All metal flow limiter
Instruction Manual SB02, SB03, SB04 All metal flow limiter PKP Prozessmesstechnik GmbH Borsigstraße 24 D-65205 Wiesbaden-Nordenstadt Tel.: ++49-(0)6122-7055-0 Fax: ++49-(0)6122-7055-50 Email: info@pkp.de
More informationSeries 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-1 B Pressure Reducing Valve Type 44-6 B Excess Pressure Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT
More informationInstrument Operating Manual
Instrument Operating Manual INDEX NO. SUBJECT PAGE 1 INFORMATION 3 2 SAFETY 4 3 INTENDED USE 4 4 COMMISSIONING & OPERATION 5 5 MAINTENANCE 6 2 INFORMATION The pressure gauges described in the operating
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The EMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Features Suitable for
More informationInstallation and Maintenance Instruction Manual
Installation and Maintenance Instruction Manual Bi-metal Thermometer Model A and E in a configuration - pursuant to ASME B40.200: ##=E#=### or ##=ERT#=### - pursuant to EN 13190: ###=A#=### or ##=ART#=###
More informationType 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
More informationDiaphragm Accumulators
1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydro-pneumatic accumulators for storing fluids.
More informationMounting and Operating Instructions EB 9519 EN. Differential Pressure and Flow Meter Media 5. Zero adjuster
Differential Pressure and Flow Meter Media 5 Zero adjuster Fig. 1 Media 5 with limit switches, attached valve block and pressure gauge Mounting and Operating Instructions EB 9519 EN Edition April 2004
More informationPressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
More informationF Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges
Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationLiquid level switch BM 34
KROHNE 09/2001 7.02370.21.00 GR/PRINTO Liquid level switch Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level
More informationHow to specify a product. Process Sensors and Mechanical Instruments
How to specify a product Process Sensors and Mechanical Instruments Keep the overview. Here is some guideline information on how to specify our products. Intended as supplementary help to specification
More informationPressure switch and Thermostat CAS
Data sheet Pressure switch and Thermostat CAS The CAS Series consists of a series of pressure controlled switches and temperature controlled switches. In this series, special attention has been given to
More information