McGRAW-EDISON BSL/BRL BOLLARD. Type. Catalog # Project. Date. Comments. Prepared by W

Transcription

1 DESCRIPTION The McGraw-Edison BSL / BRL Bollard Series, available in heights from " to ", has crisp, clean lines which blend with any architectural setting. Constructed of seamless, heavy-duty aluminum and finished with a tough polyester powder coat finish, the McGraw-Edison Louvered Bollard Series is gasketed to seal out external contaminants. U.L. 598 listed and CSA certified for wet locations. Bollards are designed for walkways, entranceways, drives and other small-area lighting applications where low mounting heights are desirable. SPECIFICATION FEATURES Catalog # Project Comments Prepared by McGRAW-EDISON Type Date Construction TOP: Rugged, minimum 5/" thick cast aluminum top cap secured via a concealed stainless steel allen screw with twist removal mechanism for lamp access. Flow through ventilation assure cool to the touch top. LOUVERS: Cast Aluminum Louver blades provide sharp cutoff delivering no direct light above 9. Louvers are secured to the shaft via tamper stainless steel rods and fasteners. LOWER HOUSING: Nominal /8" thick aluminum extruded housing. Bollard housing is secured to the base with flathead, counter-sunk screws for smooth, uncluttered appearance. BASE: Rugged cast aluminum. Completely concealed. Electrical HID High Power Factor ballast for - F starting. CFL Electronic ballast for F starting. Product is factory mounted to the base. Quick disconnects provided between lamp and electrical assembly. and High Pressure Sodium lamp sources up to W and up to W Compact Fluorescent sources. Optical LA ENCLOSURE: One piece tempered glass with internal flutes for even disbursement of illumination. Decorative colored glass optional. Globe is fully gasketed via EPDM material. Socket is porcelain, medium-base for HID lamp sources and polycarbonate/pbt GXq-/q- base for compact fluorescent lamps. Mounting Base mounts onto foundation with three () /" x /" anchor bolts on a 5" Dia. bolt circle (a centrally located 7/8" x /" wire entrance opening provided). Finish Premium fade and abrasion resistant, TGIC Polyester Powder Coat Finish. Standard colors are Black, Grey, Bronze, White, Dark Platinum and Graphite Metallic. Other finish colors available including all RAL matches. BSL/BRL BOLLARD 6 - W Pulse Start Compact Fluorescent Incandescent PATHWAY LUMINAIRE NOTE: In select finishes only. DIMENSIONS WATTAGE TABLE Round 8" [mm] Square 7" [78mm] Pulse Start () (HPS) Compact Fluorescent (CF) Incandescent (IN) Wattage 5, 7, W 5, 5, 7, W () 6, (), () W W Energy Data Reactor Ballast Input Watts 5W HPS NPF (6 Watts) " [67mm] 6" [9mm] " [8mm] 8" [7mm] High Reactance Ballast Input Watts 5W HPS HPF (6 Watts) 5W HPF (69 Watts) 7W HPS HPF (86 Watts) 7W HPF (9 Watts) W HPS HPF (5 Watts) W HPF (9 Watts) 5W HPS HPF (7 Watts) 5W HPF (85 Watts) " [6mm] SHIPPING DATA Approximate Net Weight: 6 lbs. ( kgs.) SYSTEMS C E R T I F I E D ADH859 pc -6- :8:9

2 BSL/BRL BOLLARD PHOTOMETRICS x 5x x 5x footcandle values of each isofootcandle line. Distance in units of mounting height. 5x 5x " " " " "..... x x 5x 5x x BSL-6-- -Watt 7,9-Lumen Lamp (Coated ED-7) x 5x x x 5x 5x x BSL-6--HPS -Watt HPS 8,8-Lumen Lamp (Coated ED-7) x 5x ANCHOR BOLT TELATE (NOT TO SCALE) UTER DIMENSION OF ROUND BOLLARD. 8" DIA. OUTER DIMENSION OF SQUARE BOLLARD. 7" SQUARE. NOTE: CONDUIT MUST BE INSIDE OF OPENING WITH A MAXIMUM HEIGHT OF /" INCHES ABOVE CONCRETE. ANCHOR BOLT PROJECTION TO BE /" MIN. AND /" MAX. ABOVE CONCRETE. A B C D E 5x 5x x x 5x 5x x BRL-6-- -Watt 7,9-Lumen Lamp (Coated ED-7) x x 5x 5x x BRL-6--HPS -Watt HPS 8,8-Lumen Lamp (Coated ED-7) COOPER INDUSTRIES VICKSBURG,MS.,U.S.A. 98 BOLLARD ANCHOR BOLT TELATE 7C7H 5" DIA. BOLT CIRCLE W/ /" DIA. ANCHOR BOLTS ORDERING INFORMATION BSL BZ BSL BZ Product Family BSL= Square Bollard with Stacked Louvers and Pyramidal Top BRL= Round Bollard with Stacked Louvers and Dome Top Fixture Height = '' 8= 8'' = '' 6= 6'' = '' Lamp Wattage 5= 5W 7= 7W = W HPS 5= 5W 5= 5W 7= 7W = W CF 6 = () 6W = () W = () W IC = W = Pulse Start Metal Halide HPS= CF= Compact Fluorescent IC= Incandescent Voltage = V 8= 8V = V 77= 77V 7= 7V MT= Multi-Tap TT= Triple-Tap UNV= Universal 5-77V Color 6 AP= Grey BZ= Bronze BK= Black WH= White DP= Dark Platinum GM= Graphite Metallic Options 7 F= Single Fuse (, 77 or 7V) FF= Double Fuse (8, or 8V) L= Lamp Included 8 R= Provisional cut for GFI Receptacle 9 R= Installed GFI Receptacle 9 CF/EM= Emergency Battery Pack AB= Aqua Marine Blue Glass Jar HG= Hunter Green Glass Jar OR= Orange Glass Jar RB= Royal Blue Glass Jar RE= Red Glass Jar Notes: HID lamps are medium base. 75W MH is available for non-u.s. markets only. 5W HPS available in V only. Products also available in non-us voltages and 5Hz for international markets. Consult factory for availability and ordering information. Multi-Tap ballast is /8//77V wired 77V. Triple-Tap ballast is /77/7V wired 7V. 5 Compact Fluorescent only Electronic ballast universal voltage -77V. 6 Other finish colors available, including a full line of RAL color matches. Consult your Cooper Lighting Representative. 7 Add as suffix in the order shown. 8 Coated lamp standard. Must specify clear lamp if desired. 9 Location of R and R option on housing subject to height of luminaire. CF lamps only, rated minimum operating temperature F ( C). NOTE: Specifications and dimensions subject to change without notice. Visit our web site at Customer First Center Highway 7 South Peachtree City, GA FAX ADH859 pc -6- :8:9-6- :6:5

3 DESCRIPTION The Lumark Tribute is the most versatile, functionally designed, universally adaptable outdoor luminaire available. The Tribute brings outstanding performance to walkways, parking lots, roadways, loading docks, building areas, and any security lighting application. U.L. listed and CSA certified for wet locations. COOPER LIGHTING - LUMARK Catalog # Project Comments Type Date Prepared by SPECIFICATION FEATURES Construction Rugged one-piece die-cast aluminum housing and door frame. One-piece silicone gasket protects the optical chamber from performance degrading contaminants. One () stainless spring latch and two () stainless hinges allow toolless opening and removal of door frame. Reflector Choice of nine (9) high efficiency optical distributions, including five (5) segmented optical systems constructed of premium 95% reflective odized aluminum sheet. Optical segments are rigidly mounted inside a thick gauge aluminum housing for superior protection. All segment faces are clean of rivet heads, tabs or other means of attachment which may cause streaking in the light distribution. Optical modules are field rotatable in 9 increments and offered standard with mogul base lampholders for High Pressure Sodium and -W assemblies or medium-base lampholders for 5W and below. Electrical Ballast and related electrical componentry are hard mounted to die-cast housing for optimal heat transfer and operating efficiency. Optional swing-down galvanized steel power tray with integral handle and quick disconnects allows tray to be completely removed from housing providing ample room for fixture installation and maintenance. Mounting Extruded 8" aluminum arm features internal bolt guides for easy positioning of fixture during installation to pole or wall surface. Standard single carton packaging of housing, square pole arm and round pole adapter allow for consolidated product arrival to site. Optional internal mast arm mount accepts a /" to /8" O.D. horizontal tenon, while a -bolt clamping mechanism secures fixture. Cast-in leveling guides provide +/-5 vertical leveling adjustment. Finish Housing and arm finished in a 5 stage premium TGIC bronze polyester powder coat paint. Optional colors include black, grey, white, dark platinum and graphite metallic. RAL and custom color matches available. TR TRIBUTE 7 - W Pulse Start AREA LUMINAIRE DIMENSIONS TECHNICAL D ATA 6 /" [65mm] " [559mm] 8" [mm] UL Wet Locations Listed CSA Certified EISA Compliant ENER GY D ATA Hi-Reactance Ballast Input Watts 7W HPS HPF (95 Watts) W HPS HPF ( Watts) 5W HPS HPF (9 Watts) 5W HPF (85 Watts) 5 /" [9mm] CWI Ballast Input Watts 5W HPS HPF ( Watts) CWA Ballast Input Watts DRILLING PATTERNS T Y P E M 5 / 6 " [59 mm ] /" [ mm ] di a. h ol e 7 / 6 " [ mm ] 7 /8 " [ mm ] ( ) 5 / 8 " [ 6mm ] d ia. hole s WA L L M O U N T (MA9-XX) 6 /" [ 65mm] 8" [mm] 7/8" [ mm] /" [67mm] " [5mm] 9/ 6" [ mm] Dia. Hole () T R U N N I O N M O U N T 7/6" [mm] x /" [mm] slot () /" [mm] slot " [77mm] /" [9mm] " [5mm] 75W MH HPF ( Watts) W HPF (7 Watts) W HPS HPF (5 Watts) 5W MH HPF (95 Watts) 5W HPF (8 Watts) W HPF (65 Watts) 5W HPF (97 Watts) W HPF (5 Watts) W MH HPF (55 Watts) W HPS HPF (65 Watts) E PA Effective Projected Area: (Sq. Ft.) Without Arm:.9 SHIPPING D ATA Approximate Net Weight: 9 lbs. (7.7 kgs.) SYSTEMS Consult your representative for additional options and finishes. C E R T I F ADH8 /8/ :6:8 PM I E D

4 TR TRIBUTE ORDERING INFORMATION TR-SL--8V TR SL 8V See Below = Pulse Start Metal Halide MH= HP= Series TR= Tribute (Arm Included) Distribution F= Type II Formed S= Type II F= Type III Formed S= Type III F= Type IV Formed S= Type IV 5F= Type V Formed 5S= Type V SL= Spill Light Eliminator Lamp Wattage 7= 7W = W 5= 5W = W 5= 5W = W 5= 5W = W MH 75= 75W 5= 5W = W, HPS 7= 7W = W 5= 5W 5= 5W = W Voltage 5 V= V 8V= 8V V= V 77V= 77V 7V= 7V 6 8V= 8V DT= Dual-Tap MT= Multi-Tap, wired 77V TT= Triple-Tap, 6 wired 7V 5T= 5 Tap Wired 5 8V Options F= Single Fuse (, 77 or 7V 7 only) F= Double Fuse (8, or 8V 7 only) Q= Quartz Restrike (Hot Strike Only) 8 EM= Quartz Restrike with ''Delay 8 Relay'' (Quartz lamp strikes at both hot and cold starts) EM/SC= Emergency Separate 8 Circuit LL= Lamp Included S= /" - /8" Internal Mast Arm Mount TM= Trunnion Mount CEC= California Title Compliant Ballast (Applies to -W and W only) PT= Electrical Power Tray PER= NEMA Twistlock Photocontrol Receptacle PC= Button Type Photocontrol 9 HS= House Side Cutoff LA= Less Arm (Order Mounting Separately) Standard Color = Bronze (Standard) WH= White BK= Black AP= Grey DP= Dark Platinum GM= Graphite Metallic Accessories MA-BZ= Direct Wall Mount Kit MA8-BZ= Direct Mount for Pole MA9-BZ= Wall Mounting Plate OA9-BZ= Adjustable slipfitter Arm for Mount /8" O.D. MA-BZ= External House Side Shield Kit (EPA=.8) MA= Internal House Side Shield Kit for S/S MA= Internal House Side Shield Kit S MA= Internal House Side Shield Kit for F/F MA5= Internal House Side Shield Kit for F MA-BZ= Single Adapter for /" O.D. 8 degrees Adapter for /" O.D. degrees Adaptor for /" O.D. 9 degrees Adapter for /" O.D. 9 degrees Adapter for /" O.D. degrees Adapter for /" O.D. 9 degrees Adapter for /" O.D. MA7-BZ= Single Adapter for /8 " O.D. 8 degrees Adapter for /8" O.D. degrees Adapter for /8" O.D. 9 degrees Adapter for /8" O.D. 9 degrees Adapter for /8" O.D. 9 degrees Adapter for /8" O.D. TR/VS= Field Installed Vandal Shield OA/RA= Photocontrol Shorting Cap OA/RA6= NEMA Photocontrol - Multi-Tap OA/RA7= NEMA Photocontrol 8V OA/RA= NEMA Photocontrol 7V Notes: 8 Inch Arm and pole adapter included with fixture. Specify Less Arm "LA" option when mounting accessory is ordered separately. 5W and below in Pulse Start are medium base sockets. All other wattages are mogul base. Requires reduced envelope lamp. 75W, 5W, and W MH available in non-u.s. markets only. 5 Products also available in non-us voltages and 5HZ for international markets. Consult your Cooper Representative for availabiltiy and ordering information. 5T only available in W MH. 6 88% efficient EISA Compliant fixtures not available in 7V or TT Voltages. 7 Must specify voltage. 8 Quartz options not available with SL optics. 9 Specify V, 8V, V, or 77V only. House side shield not available on 5S, 5F, or SL optics. Order separately/replace XX with color specification. Not available with SLE or House Side Sheild. STOCK SALE NUMBER (Lamp Included) SALE NUMBER : TR TR =Pulse Start HP= Series TR=Tribute Distribution =Type II/III Formed Lamp Wattage 5=5W 5=5W =W =W NOTES: Short logic fixtures are finished bronze include multi-tap ballast, lamp, arm and round pole adapter. Other options not available. Refer to standard ordering logic. Available in 5, 5 and Watt. Refer to In Stock Guide for availability. VOLTAGE CHART DT=Dual-Tap /77 (wired 77V) MT=Multi-Tap /8//77 (wired 77V) TT=Triple-Tap /77/7 (wired 7V) 5T=5-Tap /8//77/8 (wired 8V) LA TYPE Pulse Start WATTAGE 7,, 5, 5,, 5, W 75, 5, W 7,, 5, 5, W Lumark Customer First Center Highway 7 South Peachtree City, GA 69 TEL FAX ADH8 /8/ :6:8 PM

5 PHOTOMETRICS [Complete IES files available at TR-S- Watt, Lumen Clear Lamp Type III ' ' ' TR-S- Watt, Lumen Clear Lamp Type IV ' ' ' TR-SL- Watt, Lumen Clear Lamp Spill Light Eliminator ' ' ' MOUNTING CONFIGURATIONS Wall Mount Arm Mount Single EPA:.6 Arm 8 EPA:. Arm 9 EPA:. Arm (Round Pole Only) EPA:. Arm 9 EPA:. Arm 9 EPA: 5. Lumark Customer First Center Highway 7 South Peachtree City, GA 69 TEL FAX ADH8 /8/ :6:8 PM

6 DESCRIPTION Galleria's beauty and versatility make it an excellent choice for roadway and general area lighting applications. An aesthetic reveal in the formed aluminum housing gives the Galleria a distinctive look while a variety of mounting options and lamp wattages provide maximum flexibility. Galleria's superior light distributions makes it the optimum choice for almost any small, medium or large area lighting application. Catalog # Project Comments Prepared by McGRAW-EDISON Type Date SPECIFICATION FEATURES Construction HOUSING: Formed aluminum housing with stamped reveal has interior-welded seams for structural integrity and is finished in premium TGIC polyester powder coat. U.L. listed and CSA certified for wet locations. DOOR: Formed aluminum door has heavy-duty hinges, captive retaining screws and is finished in premium TGIC polyester powder coat. (Spider mount unit has steel door.) Electrical BALLAST TRAY: Ballast tray is hardmounted to housing interior for cooler operation. Optical REFLECTOR: Choice of high efficiency optical systems utilizing horizontal and vertical lamp orientations. Optional high efficiency segmented optical systems constructed of premium 95% reflective anodized aluminum sheet. Optical segments are rigidly mounted inside a thick gauge aluminum housing for superior protection. All segment faces are clean of rivet heads, tabs or other means of attachment which may cause streaking in the light distribution. Standard with mogulbase socket. All optical modules feature quick disconnect wiring plugs and are field rotatable in 9 increments. LENS: Convex tempered glass lens or flat glass. Mounting Extruded aluminum arm includes internal bolt guides allowing for easy positioning of fixture during assembly. Specify arm-included mounting for contractor-friendly single carton packaging of housing and arm. GSS/GSM/GSL GALLERIA SQUARE 7 - W Pulse Start DIMENSIONS ARM DRILLING Arm Mount Spider Mount TYPE "M" A A -5/6" [59mm] /" [9mm] Dia. Hole -7/6" [6mm] ARCHITECTURAL AREA LUMINAIRE -7/8" [mm] B B () 5/8" [6mm] Dia. Holes F C D E Fixture F GSS 9-/" -/" -7/8" 5-5/8" 6" or 9" -/" 5mm 8mm 7mm 97mm 5mm or 9mm 7mm GSM " -/" 9-/" -/" 6" or " 5" or 6" 79mm 89mm 8mm 55mm 5mm or 56mm 8mm or 6mm GSL -/" -/" 5-7/8" 7" 6" or " 8-/" or 9-/" 68mm 8mm 657mm 686mm 5mm or 56mm 76mm or 5mm NOTE: Top cap used on GSM with W flat glass vertically lamped optics only. WATTAGE TABLE Fixture Wattage GSS (Galleria Small) Pulse Start () 7,, 5W (HPS) 7,, 5W (MH) 75W GSM (Galleria Medium) Pulse Start () 7,, 5, 75,, 5,, 5,, 5, 75, 875, W (HPS) 7,, 5, 5,, 75, W (MH) 75, 5,, W GSL (Galleria Large) Pulse Start () 5,, 5,, 5, 75, W (HPS) 5,, 75, W (MH) 5,, W C D ENERGY DATA CWA Ballast Input Watts 5W HPF (85 Watts) 75W HPF (98 Watts) G 5W HPF (8 Watts) G 5W HPS HPF (95 Watts) W HPF (5 Watts) G W HPS HPF (57 Watts) 75W HPF (8 Watts) W MH HPF (8 Watts) W HPS HPF ( Watts) EPA Effective Projected Area: (Sq. Ft.) [Without Arm] GSS:. GSM:. GSL:.9 [Spider Mount] GSS:.5 GSM:.86 GSL:.5 SHIPPING DATA Approximate Net Weight: 6 lbs. (6 kgs.) 79 lbs. (6 kgs.) 88 lbs. ( kgs.) SYSTEMS C E R T I F I E D ADH8575 pc -6- :9:5

7 GSS / GSM / GSL GALLERIA SQUARE MOUNTING CONFIGURATIONS Wall Mount Arm Mount Single Arm 8 Arm 9 Arm (Round Pole Only) Arm 9 Arm 9 E.P.A. TABLE Single [w/arm where @ 9 GSS GSM GSL PHOTOMETRICS Select mounting height and read across for footcandle values of each isofootcandle line. Distance in units of mounting height. W [SL] / W [AR] 5' ' ' GSM-XX--MH-SL-FG -Watt MH,-Lumen Clear Lamp Spill Light Eliminator Flat Glass 5 GSM-XX--MH-V-FG -Watt MH,-Lumen Clear Lamp Type III Vertical Flat Glass 5 GSM-XX--MH-AS-SG -Watt MH,-Lumen Clear Lamp Area Square Flat Glass W [V/AS] ' ' ' NOTE: Specifications and dimensions subject to change without notice. Visit our web site at Customer First Center Highway 7 South Peachtree City, GA FAX ADH8575 pc -6- :9:5-6- :6:9

8 GSS / GSM / GSL GALLERIA SQUARE ORDERING INFORMATION GSM-AIS---8-FT-FG-BZ GSM AIS 8 FT FG BZ BZ Product Family GSS= Galleria Square Small GSM= Galleria Square Medium GSL= Galleria Square Large Mounting Method AM= Arm Mount AIR= Arm Included for Round Pole AIS= Arm Included for Square Pole SM= Spider Mount ( /8'' OD ) SM= Spider Mount ('' OD ) SM= Spider Mount ( /'' OD ) Lamp 5 Wattage 7= 7W = W 5= 5W 75= 75W = W 5= 5W = W 5= 5W = W 6 5= 5W 75= 75W 875= 875W = W 7 HPS 7= 7W = W 5= 5W 5= 5W = W 75= 75W = W 7 MH 8 75= 75W 5= 5W = W = W 7 = Pulse Start Metal Halide HPS= High Pressure Sodium MH= 8 Voltage 9 = V 8= 8V = V 77= 77V 7= 7V 8= 8V MT= Multi-Tap TT= Triple-Tap 5T= 5-Tap Distribution Horizontal Lamp F= Type I Formed F= Type II Formed S= Type II F= Type III Formed S= Type III S= Type IV 5S= Type V FT= Forward Throw SL= Spill Light Eliminator CA= Cutoff Asymetric 5 with EHS Vertical Lamp AR= Area Round AS= Area Square 5 V= Type III Vertical 5 RW= Rectangular Wide5, 6 Lens Type FG= Flat Glass 7 SG= Sag Glass Notes: Arm not included. See Accessories. Arm length varies based on housing size: 9" for GSS, -/" for GSM and " for GSL. Available on GSS housing only. Available on GSL housing only. 5 Standard with medium-base sockets in GSS housing. Mogul-base sockets in GSM and GSL housings. Wattage availability varies by housing size - see Wattage Table. 6 Requires reduced envelope ED-8 lamp when used with GSM housing and flat glass vertically lamped optics. 7 Requires reduced envelope BT-7 lamp when used with GSM housing. 8 75, 5 and W MH available for non-us markets only. 9 Products also available in non-us voltages and 5Hz for international markets. Consult factory for availability and ordering information. Multi-Tap ballast is /8//77V wired 77V. Triple-Tap ballast is 77/7/8V wired 7V. 5-Tap ballast is /8//77/8V wired 8V. Only available in -W. Medium housing fixture only. Maximum wattage on segmented optical distributions is W. W lamp must use reduced envelope ED-8 lamp. Not available in GSL housing. Must use reduced envelope lamp, not available in GSL housing. 5 Available on GSM and GSL housings only. 6 RW optic not available with flat glass. 7 W GSL with flat glass requires BT-7 lamp and is not available in AS, RW, SL or V distributions. 8 Other finish colors available, including a full line of RAL color matches. Consult your Cooper Lighting Representative. 9 Add as suffix in the order shown. Quartz options not available with SL optics. House side shield not available with 5S, RW, AS, AR, SL and CA optics. Not available in W. Arm mount only, W Maximum. Order separately, replace XX with color suffix. 5 Use for mounting fixtures at 9 degree increments. 6 Compatible with sag lens vertical optics only. Color 8 AP= Grey BZ= Bronze BK= Black WH= White DP= Dark Platinum GM= Graphite Metallic Options 9 CEC= California Title Compliant Ballast (Applies to 75-W and W only) F= Single Fuse (, 77 or 7V) FF= Double Fuse (8, or 8V) L= Lamp Included EM= Quartz Restrike w/ Delay Q= Quartz Restrike R= NEMA Twistlock Photocontrol Receptacle EHS= External Adjustable House Side Shield HS= House Side Shield, VS= Vandal Shield Accessories GSM-EXTHS= External House Side Shield -. EPA GSL-EXTHS= External House Side Shield -.6 EPA MABZ= '' Arm for Square Pole.. EPA5, 5 MA5BZ= 6'' Arm for Square Pole..5 EPA5 MA6BZ= Direct Mount Kit for Square Pole5 MA7BZ= '' Arm for Round Pole.. EPA5, 5 MA8BZ= 6'' Arm for Round Pole..5 EPA5 MA9BZ= Direct Mount Kit for Round Pole5 MABZ= 6'' Arm for Square Pole..5 EPA MABZ= 6'' Arm for Round Pole..5 EPA MABZ= 9'' Arm for Square Pole..5 EPA, 5 MABZ= 9'' Arm for Round Pole..5 EPA, 5 MA9BZ= Wall Mount Bracket with '' Arm MA6BZ= Wall Mount Bracket MA8BZ= /'' Arm and Round Pole Adapter -..8 EPA OA66BZ= Mast Arm Adapter MABZ= Single Adapter for /'' O.D. Adapter for /'' O.D. Adapter for /'' O.D. Adapter for /'' O.D. Adapter for /'' O.D. Adapter for /'' O.D. Adapter for /'' O.D. MA7BZ= Single Adapter for /8'' O.D. Adapter for /8'' O.D. Adapter for /8'' O.D. Adapter for /8'' O.D. Adapter for /8'' O.D. Adapter for /8'' O.D. MA6= House Side Shield for GSS (Field Installed)6 MA6= House Side Shield for GSM (Field 6 Installed) MA6= House Side Shield for GSL (Field Installed)6 OA/RA6= NEMA Twistlock Photocontrol - Multi-Tap OA/RA7= NEMA Twistlock Photocontrol - 8V OA/RA= NEMA Twistlock Photocontrol - 7V NOTE: Specifications and dimensions subject to change without notice. Visit our web site at Customer First Center Highway 7 South Peachtree City, GA FAX ADH8575 pc -6- :9:5-6- :6:9

9 DESCRIPTION The Lumark Tribute is the most versatile, functionally designed, universally adaptable outdoor luminaire available. The Tribute brings outstanding performance to walkways, parking lots, roadways, loading docks, building areas, and any security lighting application. U.L. listed and CSA certified for wet locations. COOPER LIGHTING - LUMARK Catalog # Project Comments Type Date Prepared by SPECIFICATION FEATURES Construction Rugged one-piece die-cast aluminum housing and door frame. One-piece silicone gasket protects the optical chamber from performance degrading contaminants. One () stainless spring latch and two () stainless hinges allow toolless opening and removal of door frame. Reflector Choice of nine (9) high efficiency optical distributions, including five (5) segmented optical systems constructed of premium 95% reflective odized aluminum sheet. Optical segments are rigidly mounted inside a thick gauge aluminum housing for superior protection. All segment faces are clean of rivet heads, tabs or other means of attachment which may cause streaking in the light distribution. Optical modules are field rotatable in 9 increments and offered standard with mogul base lampholders for High Pressure Sodium and -W assemblies or medium-base lampholders for 5W and below. Electrical Ballast and related electrical componentry are hard mounted to die-cast housing for optimal heat transfer and operating efficiency. Optional swing-down galvanized steel power tray with integral handle and quick disconnects allows tray to be completely removed from housing providing ample room for fixture installation and maintenance. Mounting Extruded 8" aluminum arm features internal bolt guides for easy positioning of fixture during installation to pole or wall surface. Standard single carton packaging of housing, square pole arm and round pole adapter allow for consolidated product arrival to site. Optional internal mast arm mount accepts a /" to /8" O.D. horizontal tenon, while a -bolt clamping mechanism secures fixture. Cast-in leveling guides provide +/-5 vertical leveling adjustment. Finish Housing and arm finished in a 5 stage premium TGIC bronze polyester powder coat paint. Optional colors include black, grey, white, dark platinum and graphite metallic. RAL and custom color matches available. TR TRIBUTE 7 - W Pulse Start AREA LUMINAIRE DIMENSIONS TECHNICAL D ATA 6 /" [65mm] " [559mm] 8" [mm] UL Wet Locations Listed CSA Certified EISA Compliant ENER GY D ATA Hi-Reactance Ballast Input Watts 7W HPS HPF (95 Watts) W HPS HPF ( Watts) 5W HPS HPF (9 Watts) 5W HPF (85 Watts) 5 /" [9mm] CWI Ballast Input Watts 5W HPS HPF ( Watts) CWA Ballast Input Watts DRILLING PATTERNS T Y P E M 5 / 6 " [59 mm ] /" [ mm ] di a. h ol e 7 / 6 " [ mm ] 7 /8 " [ mm ] ( ) 5 / 8 " [ 6mm ] d ia. hole s WA L L M O U N T (MA9-XX) 6 /" [ 65mm] 8" [mm] 7/8" [ mm] /" [67mm] " [5mm] 9/ 6" [ mm] Dia. Hole () T R U N N I O N M O U N T 7/6" [mm] x /" [mm] slot () /" [mm] slot " [77mm] /" [9mm] " [5mm] 75W MH HPF ( Watts) W HPF (7 Watts) W HPS HPF (5 Watts) 5W MH HPF (95 Watts) 5W HPF (8 Watts) W HPF (65 Watts) 5W HPF (97 Watts) W HPF (5 Watts) W MH HPF (55 Watts) W HPS HPF (65 Watts) E PA Effective Projected Area: (Sq. Ft.) Without Arm:.9 SHIPPING D ATA Approximate Net Weight: 9 lbs. (7.7 kgs.) SYSTEMS Consult your representative for additional options and finishes. C E R T I F ADH8 /8/ :6:8 PM I E D

10 TR TRIBUTE ORDERING INFORMATION TR-5S--8V TR 5S 8V See Below = Pulse Start Metal Halide MH= HP= Series TR= Tribute (Arm Included) Distribution F= Type II Formed S= Type II F= Type III Formed S= Type III F= Type IV Formed S= Type IV 5F= Type V Formed 5S= Type V SL= Spill Light Eliminator Lamp Wattage 7= 7W = W 5= 5W = W 5= 5W = W 5= 5W = W MH 75= 75W 5= 5W = W, HPS 7= 7W = W 5= 5W 5= 5W = W Voltage 5 V= V 8V= 8V V= V 77V= 77V 7V= 7V 6 8V= 8V DT= Dual-Tap MT= Multi-Tap, wired 77V TT= Triple-Tap, 6 wired 7V 5T= 5 Tap Wired 5 8V Options F= Single Fuse (, 77 or 7V 7 only) F= Double Fuse (8, or 8V 7 only) Q= Quartz Restrike (Hot Strike Only) 8 EM= Quartz Restrike with ''Delay 8 Relay'' (Quartz lamp strikes at both hot and cold starts) EM/SC= Emergency Separate 8 Circuit LL= Lamp Included S= /" - /8" Internal Mast Arm Mount TM= Trunnion Mount CEC= California Title Compliant Ballast (Applies to -W and W only) PT= Electrical Power Tray PER= NEMA Twistlock Photocontrol Receptacle PC= Button Type Photocontrol 9 HS= House Side Cutoff LA= Less Arm (Order Mounting Separately) Standard Color = Bronze (Standard) WH= White BK= Black AP= Grey DP= Dark Platinum GM= Graphite Metallic Accessories MA-BZ= Direct Wall Mount Kit MA8-BZ= Direct Mount for Pole MA9-BZ= Wall Mounting Plate OA9-BZ= Adjustable slipfitter Arm for Mount /8" O.D. MA-BZ= External House Side Shield Kit (EPA=.8) MA= Internal House Side Shield Kit for S/S MA= Internal House Side Shield Kit S MA= Internal House Side Shield Kit for F/F MA5= Internal House Side Shield Kit for F MA-BZ= Single Adapter for /" O.D. 8 degrees Adapter for /" O.D. degrees Adaptor for /" O.D. 9 degrees Adapter for /" O.D. 9 degrees Adapter for /" O.D. degrees Adapter for /" O.D. 9 degrees Adapter for /" O.D. MA7-BZ= Single Adapter for /8 " O.D. 8 degrees Adapter for /8" O.D. degrees Adapter for /8" O.D. 9 degrees Adapter for /8" O.D. 9 degrees Adapter for /8" O.D. 9 degrees Adapter for /8" O.D. TR/VS= Field Installed Vandal Shield OA/RA= Photocontrol Shorting Cap OA/RA6= NEMA Photocontrol - Multi-Tap OA/RA7= NEMA Photocontrol 8V OA/RA= NEMA Photocontrol 7V Notes: 8 Inch Arm and pole adapter included with fixture. Specify Less Arm "LA" option when mounting accessory is ordered separately. 5W and below in Pulse Start are medium base sockets. All other wattages are mogul base. Requires reduced envelope lamp. 75W, 5W, and W MH available in non-u.s. markets only. 5 Products also available in non-us voltages and 5HZ for international markets. Consult your Cooper Representative for availabiltiy and ordering information. 5T only available in W MH. 6 88% efficient EISA Compliant fixtures not available in 7V or TT Voltages. 7 Must specify voltage. 8 Quartz options not available with SL optics. 9 Specify V, 8V, V, or 77V only. House side shield not available on 5S, 5F, or SL optics. Order separately/replace XX with color specification. Not available with SLE or House Side Sheild. STOCK SALE NUMBER (Lamp Included) SALE NUMBER : TR TR =Pulse Start HP= Series TR=Tribute Distribution =Type II/III Formed Lamp Wattage 5=5W 5=5W =W =W NOTES: Short logic fixtures are finished bronze include multi-tap ballast, lamp, arm and round pole adapter. Other options not available. Refer to standard ordering logic. Available in 5, 5 and Watt. Refer to In Stock Guide for availability. VOLTAGE CHART DT=Dual-Tap /77 (wired 77V) MT=Multi-Tap /8//77 (wired 77V) TT=Triple-Tap /77/7 (wired 7V) 5T=5-Tap /8//77/8 (wired 8V) LA TYPE Pulse Start WATTAGE 7,, 5, 5,, 5, W 75, 5, W 7,, 5, 5, W Lumark Customer First Center Highway 7 South Peachtree City, GA 69 TEL FAX ADH8 /8/ :6:8 PM

11 PHOTOMETRICS [Complete IES files available at TR-S- Watt, Lumen Clear Lamp Type III ' ' ' TR-S- Watt, Lumen Clear Lamp Type IV ' ' ' TR-SL- Watt, Lumen Clear Lamp Spill Light Eliminator ' ' ' MOUNTING CONFIGURATIONS Wall Mount Arm Mount Single EPA:.6 Arm 8 EPA:. Arm 9 EPA:. Arm (Round Pole Only) EPA:. Arm 9 EPA:. Arm 9 EPA: 5. Lumark Customer First Center Highway 7 South Peachtree City, GA 69 TEL FAX ADH8 /8/ :6:8 PM

12 DESCRIPTION The Lumark Tribute is the most versatile, functionally designed, universally adaptable outdoor luminaire available. The Tribute brings outstanding performance to walkways, parking lots, roadways, loading docks, building areas, and any security lighting application. U.L. listed and CSA certified for wet locations. COOPER LIGHTING - LUMARK Catalog # Project Comments Type Date Prepared by SPECIFICATION FEATURES Construction Rugged one-piece die-cast aluminum housing and door frame. One-piece silicone gasket protects the optical chamber from performance degrading contaminants. One () stainless spring latch and two () stainless hinges allow toolless opening and removal of door frame. Reflector Choice of nine (9) high efficiency optical distributions, including five (5) segmented optical systems constructed of premium 95% reflective odized aluminum sheet. Optical segments are rigidly mounted inside a thick gauge aluminum housing for superior protection. All segment faces are clean of rivet heads, tabs or other means of attachment which may cause streaking in the light distribution. Optical modules are field rotatable in 9 increments and offered standard with mogul base lampholders for High Pressure Sodium and -W assemblies or medium-base lampholders for 5W and below. Electrical Ballast and related electrical componentry are hard mounted to die-cast housing for optimal heat transfer and operating efficiency. Optional swing-down galvanized steel power tray with integral handle and quick disconnects allows tray to be completely removed from housing providing ample room for fixture installation and maintenance. Mounting Extruded 8" aluminum arm features internal bolt guides for easy positioning of fixture during installation to pole or wall surface. Standard single carton packaging of housing, square pole arm and round pole adapter allow for consolidated product arrival to site. Optional internal mast arm mount accepts a /" to /8" O.D. horizontal tenon, while a -bolt clamping mechanism secures fixture. Cast-in leveling guides provide +/-5 vertical leveling adjustment. Finish Housing and arm finished in a 5 stage premium TGIC bronze polyester powder coat paint. Optional colors include black, grey, white, dark platinum and graphite metallic. RAL and custom color matches available. TR TRIBUTE 7 - W Pulse Start AREA LUMINAIRE DIMENSIONS TECHNICAL D ATA 6 /" [65mm] " [559mm] 8" [mm] UL Wet Locations Listed CSA Certified EISA Compliant ENER GY D ATA Hi-Reactance Ballast Input Watts 7W HPS HPF (95 Watts) W HPS HPF ( Watts) 5W HPS HPF (9 Watts) 5W HPF (85 Watts) 5 /" [9mm] CWI Ballast Input Watts 5W HPS HPF ( Watts) CWA Ballast Input Watts DRILLING PATTERNS T Y P E M 5 / 6 " [59 mm ] /" [ mm ] di a. h ol e 7 / 6 " [ mm ] 7 /8 " [ mm ] ( ) 5 / 8 " [ 6mm ] d ia. hole s WA L L M O U N T (MA9-XX) 6 /" [ 65mm] 8" [mm] 7/8" [ mm] /" [67mm] " [5mm] 9/ 6" [ mm] Dia. Hole () T R U N N I O N M O U N T 7/6" [mm] x /" [mm] slot () /" [mm] slot " [77mm] /" [9mm] " [5mm] 75W MH HPF ( Watts) W HPF (7 Watts) W HPS HPF (5 Watts) 5W MH HPF (95 Watts) 5W HPF (8 Watts) W HPF (65 Watts) 5W HPF (97 Watts) W HPF (5 Watts) W MH HPF (55 Watts) W HPS HPF (65 Watts) E PA Effective Projected Area: (Sq. Ft.) Without Arm:.9 SHIPPING D ATA Approximate Net Weight: 9 lbs. (7.7 kgs.) SYSTEMS Consult your representative for additional options and finishes. C E R T I F ADH8 /8/ :6:8 PM I E D

13 TR TRIBUTE ORDERING INFORMATION TR-5F--8V TR 5F 8V See Below = Pulse Start Metal Halide MH= HP= Series TR= Tribute (Arm Included) Distribution F= Type II Formed S= Type II F= Type III Formed S= Type III F= Type IV Formed S= Type IV 5F= Type V Formed 5S= Type V SL= Spill Light Eliminator Lamp Wattage 7= 7W = W 5= 5W = W 5= 5W = W 5= 5W = W MH 75= 75W 5= 5W = W, HPS 7= 7W = W 5= 5W 5= 5W = W Voltage 5 V= V 8V= 8V V= V 77V= 77V 7V= 7V 6 8V= 8V DT= Dual-Tap MT= Multi-Tap, wired 77V TT= Triple-Tap, 6 wired 7V 5T= 5 Tap Wired 5 8V Options F= Single Fuse (, 77 or 7V 7 only) F= Double Fuse (8, or 8V 7 only) Q= Quartz Restrike (Hot Strike Only) 8 EM= Quartz Restrike with ''Delay 8 Relay'' (Quartz lamp strikes at both hot and cold starts) EM/SC= Emergency Separate 8 Circuit LL= Lamp Included S= /" - /8" Internal Mast Arm Mount TM= Trunnion Mount CEC= California Title Compliant Ballast (Applies to -W and W only) PT= Electrical Power Tray PER= NEMA Twistlock Photocontrol Receptacle PC= Button Type Photocontrol 9 HS= House Side Cutoff LA= Less Arm (Order Mounting Separately) Standard Color = Bronze (Standard) WH= White BK= Black AP= Grey DP= Dark Platinum GM= Graphite Metallic Accessories MA-BZ= Direct Wall Mount Kit MA8-BZ= Direct Mount for Pole MA9-BZ= Wall Mounting Plate OA9-BZ= Adjustable slipfitter Arm for Mount /8" O.D. MA-BZ= External House Side Shield Kit (EPA=.8) MA= Internal House Side Shield Kit for S/S MA= Internal House Side Shield Kit S MA= Internal House Side Shield Kit for F/F MA5= Internal House Side Shield Kit for F MA-BZ= Single Adapter for /" O.D. 8 degrees Adapter for /" O.D. degrees Adaptor for /" O.D. 9 degrees Adapter for /" O.D. 9 degrees Adapter for /" O.D. degrees Adapter for /" O.D. 9 degrees Adapter for /" O.D. MA7-BZ= Single Adapter for /8 " O.D. 8 degrees Adapter for /8" O.D. degrees Adapter for /8" O.D. 9 degrees Adapter for /8" O.D. 9 degrees Adapter for /8" O.D. 9 degrees Adapter for /8" O.D. TR/VS= Field Installed Vandal Shield OA/RA= Photocontrol Shorting Cap OA/RA6= NEMA Photocontrol - Multi-Tap OA/RA7= NEMA Photocontrol 8V OA/RA= NEMA Photocontrol 7V Notes: 8 Inch Arm and pole adapter included with fixture. Specify Less Arm "LA" option when mounting accessory is ordered separately. 5W and below in Pulse Start are medium base sockets. All other wattages are mogul base. Requires reduced envelope lamp. 75W, 5W, and W MH available in non-u.s. markets only. 5 Products also available in non-us voltages and 5HZ for international markets. Consult your Cooper Representative for availabiltiy and ordering information. 5T only available in W MH. 6 88% efficient EISA Compliant fixtures not available in 7V or TT Voltages. 7 Must specify voltage. 8 Quartz options not available with SL optics. 9 Specify V, 8V, V, or 77V only. House side shield not available on 5S, 5F, or SL optics. Order separately/replace XX with color specification. Not available with SLE or House Side Sheild. STOCK SALE NUMBER (Lamp Included) SALE NUMBER : TR TR =Pulse Start HP= Series TR=Tribute Distribution =Type II/III Formed Lamp Wattage 5=5W 5=5W =W =W NOTES: Short logic fixtures are finished bronze include multi-tap ballast, lamp, arm and round pole adapter. Other options not available. Refer to standard ordering logic. Available in 5, 5 and Watt. Refer to In Stock Guide for availability. VOLTAGE CHART DT=Dual-Tap /77 (wired 77V) MT=Multi-Tap /8//77 (wired 77V) TT=Triple-Tap /77/7 (wired 7V) 5T=5-Tap /8//77/8 (wired 8V) LA TYPE Pulse Start WATTAGE 7,, 5, 5,, 5, W 75, 5, W 7,, 5, 5, W Lumark Customer First Center Highway 7 South Peachtree City, GA 69 TEL FAX ADH8 /8/ :6:8 PM

14 PHOTOMETRICS [Complete IES files available at TR-S- Watt, Lumen Clear Lamp Type III ' ' ' TR-S- Watt, Lumen Clear Lamp Type IV ' ' ' TR-SL- Watt, Lumen Clear Lamp Spill Light Eliminator ' ' ' MOUNTING CONFIGURATIONS Wall Mount Arm Mount Single EPA:.6 Arm 8 EPA:. Arm 9 EPA:. Arm (Round Pole Only) EPA:. Arm 9 EPA:. Arm 9 EPA: 5. Lumark Customer First Center Highway 7 South Peachtree City, GA 69 TEL FAX ADH8 /8/ :6:8 PM

15 DESCRIPTION The Lumark Canopy Light combines lasting durability and excellent photometrics. CSA certified for wet locations. The Canopy Light mounts quickly to a variety of surfaces, making it ideal for covered walkways, convenience store/service station canopies and enclosed parking areas. COOPER LIGHTING - LUMARK Catalog # Project Type Comments Date Prepared by SPECIFICATION FEATURES Construction HOUSING: CL housing is constructed of heavy-gauge aluminum. CS housing is constructed of durable steel welded construction. GASKET: Fully gasketed door frame seals out contaminants. DOOR: Hinged door provides easy access for maintenance and relamping and door can be removed to simplify installation. Electrical BALLAST: High power factor ballast with class H insulation. CL construction is listed for C ambient environments. CS construction is listed for 5 C ambient environments. Optics Optical system features an injection-molded prismatic lens with internal prisms and white highly reflective internal surface. Finish Weather- and abrasion-resistant white polyester powder coat finish. CL/CS CANOPY LIGHT - W Pulse Start CANOPY LUMINAIRE TECHNICAL DATA UL Wet Location Listed CSA Certified EISA Compliant G DIMENSIONS ENERGY DATA Reactor Ballast Input Watts W HPS HPF (8 Watts) W HPF (8 Watts) 5W HPS HPF (75 Watts) High Reactor Ballast Input Watts 5W HPF (85 Watts) LA TYPE -5/6" [5mm] Square Pulse Start () (MH) (HP) " [5mm] WATTAGE, 5,, 5,, 5, W 75, 5, W, 5, 5, W CWI Ballast Input Watts 75W MH HPF ( Watts) 5W HPS HPF ( Watts) 5W MH HPF ( Watts) W HPS HPF (65 Watts) W MH HPF (75 Watts) CWA Ballast Input Watts 75W MH HPF ( Watts) W HPS HPF (5 Watts) W HPF (7 Watts) G 5W HPF (8 Watts) G W HPF (65 Watts) G W HPS HPF (65 Watts) W MH HPF (55 Watts) W HPF (5 Watt) G SHIPPING DATA Approximate Net Weight: lbs. ( kgs.) SYSTEMS C E R T I F I E D ADH887 pc -- :8:8

16 ORDERING INFORMATION CL/CS - CANOPY LIGHT CS--8V-BZ CS 8V = Pulse Start MH= HP= Series CL= Canopy Light (Aluminum Housing) CS= Canopy Light (Steel Housing) Lamp Wattage 5 = W 5= 5W = W 5= 5W = W 5= 5W = W MH 75= 75W 5= 5W = W HP = W 5= 5W 5= 5W = W Voltage 6 V= V 8V= 8V V= V 77V= 77V 7V= 7V 7 8V= 8V MT= Multi-Tap TT= Triple-Tap, wired 7 7V Options F= Single Fuse (, 77 or 7V only) F= Double Fuse (8, or 8V only) Q= Quartz Restrike (Hot Strike Only) EM= Quartz Restrike with ''Delay Relay'' (Quartz lamp strikes at both hot and cold starts) C7= Flat Prismatic Tempered Glass Lens LL= Lamp Included 8 CEC= California Title Compliant Ballast (Applies to -W and W only) POM= Position Oriented Socket Notes: 5,, 5,, 5, and 5W only. 75W, 5W, and W MH available in non-u.s. markets only. C Ambient environment, except W HPS is 5 C ambient. 5 C Ambient environment. 5 All lamps are mogul-base except 5W and below are medium-base. Lamp not included. 6 Products also available in non-us voltages and 5HZ for international markets. 7 88% efficient EISA Compliant fixtures not available in 7V or TT Voltages. 8 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. STOCK SALE NUMBER SALE NUMBER: CL-H-MT-LL CL MT LL VOLTAGE CHART MT=Multi-Tap TT=Triple-Tap /8//77 (wired 77V) /77/7 (wired 7V) Series CL Lamp Wattage 5 Voltage MT Options LL (Includes 5 lamp) NOTES: Standard Multi-tap. Refer to In-Stock Guide for availability. Options not available with stock products. Refer to Standard order information and options. Available without lamp CL--MT or CL--MT. PHOTOMETRICS F footcandle values of each isofootcandle line. Distance in units of mounting height. F 5' ' CL- -Watt,-Lumen Clear Lamp NOTE: Specifications and dimensions subject to change without notice. Visit our web site at Customer First Center Highway 7 South Peachtree City, GA FAX ADH887 pc -- :8:8-9- 6:9:8