SCHRADER TANK VALVES FOR USE IN AIR BLADDER APPLICATIONS, BICYCLE SUSPENSION SYSTEMS, TELECOMMUNICATIONS, WATER STORAGE SYSTEMS, ETC.
|
|
|
- Kathlyn Gallagher
- 6 years ago
- Views:
Transcription
1 SCHRADER TANK VALVES FOR USE IN AIR BLADDER APPLICATIONS, BICYCLE SUSPENSION SYSTEMS, TELECOMMUNICATIONS, WATER STORAGE SYSTEMS, ETC.
2 Demand an authentic Schrader valve built by the company that set the quality standard for tank valves more than 50 years ago. Our reliable valves make us the industry leader in performance. Schrader s experienced product development staff provides unique solutions for unique applications. Schrader can meet requirements and specifications for performance, size-weight, and cost, whether it is a single component, sub assembly or module. Existing Tank Valve applications cover many and varied uses from telecommunications to water storage. Schrader Tank Valves fit your application dependably and economically. Don t see a combination you need? Contact Schrader or your nearest Schrader Distributor. Applications Water Storage Air Bladder Applications Telecommunications Bicycle Suspension Systems Multiple Fluids Compatibility Schrader International, Inc. reserves the right to change any of the following specifications without notice. This document is meant to be used as reference only. For more specific information, or information regarding cores not listed here, please contact Schrader International, Inc. CURRENT HOUSING # OLD MONROE HOUSING # TANK VALVE INFORMATION OVERALL LENGTH THREAD SIZE HEX SIZE /4-18" NPT 9/16" /8-27" NPT 7/16" /8-27" NPT 7/16" /8-27" NPT 7/16" 906 NONE /8-27" NPT 7/16" 566 NONE /8-27" NPT 7/16" 557 NONE /4-18" NPT 9/16" HOUSING # LETTER/CORE # OLD NOMENCLATURE CONVERSION NUMBER/CAP # ALTAVISTA/ CAP # REMARKS 645 H = = 2525 CAP core replaced by L = = 6300C CAP core replaced by M = = 7572 CAP P = = 7612 CAP S = = 7572S CAP core can be replaced by W = = 440 CAP X = = 660 CAP = 2316C CAP SchraderInternational.com
3 Series Tank Valves Cap Thread Tank Thread 1/8 NPT Low lead (LL) version available Nickel Low Pressure Brass Std Air Nickel Low Pressure Nickel Std Air Loctite on pipe thds Nickel Std Air Nickel Std Air Nickel Low Pressure Nickel Std Air Nickel Low Pressure Nickel High Pressure Nickel Low Pressure Nickel High Pressure Nickel High Temp Air Nickel Body Only Nickel Std Air Brass Water Pull Core for Water Systems and Humidifiers Brass Std Air Nickel A/C Springless Core 901 Series Tank Valves Cap Thread Tank Thread 1/8 NPT Nickel A/C Nickel Std Air Nickel Low Pressure Nickel High Pressure Nickel Std Air SchraderInternational.com
4 Series Tank Valves Cap Thread Tank Thread 1/8 NPT Nickel Body Only Nickel Std Air Nickel High Pressure Nickel Low Pressure Nickel Std Air Nickel A/C Nickel A/C Nickel Std Air Nickel Std Air Nickel Std Air Nickel Fuel Nickel High Pressure Nickel Std Air #79 locknut included Nickel Std Air Nickel Fuel Brass Body Only Nickel A/C 906 Series Tank Valves Cap Thread Tank Thread 1/8 NPT Low lead (LL) version available Brass Std Air Nickel Body Only Nickel Fuel Nickel Std Air Nickel Std Air Loctite on pipe threads Nickel Std Air Loctite on pipe threads Brass Std Air Nickel Fuel Cap packed separately Nickel Fuel Cap packed separately Nickel Low Pressure Nickel High Pressure Nickel Std Air Nickel Low Pressure Nickel Std Air Nickel Fuel Alternative Fuels Nickel Std Air Cap packed separately Brass Body Only Nickel A/C Nickel High Pressure 4 SchraderInternational.com
5 Series Tank Valves Cap Thread Tank Thread 1/4 NPT Low lead (LL) version available Bright Dip High Temp Air Bright Dip Body Only Bright Dip A/C Bright Dip Low Pressure Bright Dip Low Pressure Bright Dip Low Pressure Bright Dip Low Pressure Bright Dip Low Pressure Bright Dip Std Air Nickel Std Air Nickel Low Pressure Bright Dip Std Air Brass A/C Springless valve core Bright Dip A/C Bright Dip High Pressure Bright Dip A/C Black Onyx Cap Bright Dip Fuel Bright Dip Std Air Series Tank Valves Cap Thread 7/16-20 UNF Tank Thread 1/8 NPT Bright Dip Fuel Bright Dip Low Pressure Bright Dip Fuel Nylon Refrigeration Cap Bright Dip Std Air Bright Dip A/C Bright Dip Nylon Refrigeration Cap Nickel Fuel Nylon Refrigeration Cap Nickel Fuel Brass Body Only Bright Dip Std Air Bright Dip A/C Loctite on pipe threads Nickel Fuel Nylon Refrigeration Cap SchraderInternational.com
6 557 Series Tank Valves Cap Thread Tank Thread 1/4 NPT Part Number Valve Core Cap Finish Application Brass Fuel Brass Fuel Brass High Pressure Brass Std Air High Pressure Inflating Connectors These high pressure inflating connections attach securely by hand or wrench to the valve cap threads of high pressure valves. They can be fitted to gauging and inflating devices by a variety of methods. Various angles permit easy attachment to hard-to-reach valves Part Number Generic Number Thread Size Air Line Connection Max. Pressure (PSIG) Configuration /8 NPT Male 3,000 Air line connection /8-24 thread for 3/16 flare tube fitting, meets SAE A L Large Bore /8-24 thread for 3/16 flare tube fitting /16-20 thread for 1/4 flare tube fitting, meets SAE AS4395 3,000 Air line connection 90 3,000 Air line connection 90 Recommended Max. Torque to Valve Mouth* 15,000 Straight 75 in.-lb. for steel valves /8 NPT Female 3,000 Air line connection /16-20 thread for 1/4 flare tube fitting, meets SAE AS4395 5,000 Air line connection 70 * It may be necessary to replace the sealing washers after a number of uses to insure sealing on valve mouth Remarks 50 in.-lb. Has core depressor pin, copper sealing washer in.-lb. Has core depressor pin, copper sealing washer in.-lb. Has core depressor pin, copper sealing washer Copper sealing washer in.-lb. Hard fiber sealing washer (1) pc (25) pcs 30 in.-lb. Hard fiber sealing washer SchraderInternational.com
7 Available Cap Styles Schrader provides a wide range of caps to meet any application. Caps below are for threads. Valve Cores Ask for more information to see full valve core selection * Caps below are for 7/16-20, 1/4 flare threads *Low lead (LL) Version available For a complete list of valve cores, see Product Materials section under Valve Cores at to download a complete valve core catalog Specialty Valves Tank Thread Cap Thread Stainless High Pressure O-Ring, Shock Absorber Valve 1/2-20 UNF-3A Stainless Std Air With Filter 1/8-27 NPT Brass A/C O-Ring 1/8-28 British 7/16-20 UNF-2A Brass Fuel O-Ring (H1341 Housing) M10x Brass Fuel O-Ring (H1341 Housing) M10x Brass Std Air O-Ring (H1341 Housing) M10x Blk Chrome Fuel 5/16-18 UNC-2A 7/16-20 UNF-2A Aluminum Std Air O-Ring 5/16-32 UNEF-2A Aluminum Fuel O-Ring 5/16-32 UNEF-2A Stainless Std Air With Filter 1/8-27 NPT Lead-free Tank Valve Assemblies With recent legislation in several states tightening regulation of lead content in the components of potable (drinking) water systems, Schrader International has developed a line of tank valve assemblies that are compliant with NSF/ANSI Standard 61 Annex G, which limits assembly lead content to not more than 0.25% maximum of the wetted surfaces. These tank valve assemblies have been certified by U/L to meet the requirements of NSF/ANSI Standard 61 Annex G. Contact Schrader International for sizes and availability. SchraderInternational.com
8 SCHRADER USA 205 FRAZIER ROAD ALTAVISTA, VA CUSTOMER SUPPORT LINE // SCHRADERINTERNATIONAL.COM Tank Valve brochure
Industrial Products Catalog Tank Valves
Industrial Products Catalog Tank Valves Schrader International core competencies include high volume precision machining, assembly and testing of fluid control devices. Since developing the first pneumatic
// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
COPPER TUBE COPPER AND BRASS FITTINGS SOFT DRAWN COPPER CAPILLARY COUPLER CAPILLARY NOMINAL OD WALL ROLL (M) R410A STOCK CODE CAA0020 1/
COPPER TUBE SOFT DRAWN COPPER NOMINAL OD INCHES MM WALL ROLL (M) CAA0020 1/4 6.4 0.81 18 CAA0040 3/8 9.5 0.81 18 CAA0060 1/2 12.7 0.81 18 CAA0080 5/8 15.9 0.81 18 CAA0100 5/8 15.9 1.02 18 CAA0120 3/4 19.1
Speed control assembly model A-1
Pressure Regulation 533a 1. DESCRIPTION The Viking Speed Control Assembly provides adjustment of the opening speed of Viking Deluge Valves, and adjustment of both the opening and closing speed of Viking
World Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
INDUSTRIAL PRODUCTS. Industrial Products Catalog. Innovative Solutions for Gas Management Systems ENTERPRISES
INDUSTRIAL PRODUCTS ENTERPRISES Industrial Products Catalog Innovative Solutions for Gas Management Systems This catalog provides a comprehensive source of information on Western s line of products used
COMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications
COMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an
Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL D INFLATABLE JACKS
SPX Corporation 5885 11th Street Rockford, IL 6119-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (8) 477-8326 Fax: (8) 765-8326 Order Entry: (8) 541-1418 Fax: (8) 288-731 Parts List
RegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
REFRIGERATION SYSTEM COMPONENTS
REFRIGERATION SYSTEM COMPONENTS henrytech.com Conventional Oil Separators The function of an Oil Separator is to remove oil from the discharge gas and return it to the Compressor either directly or through
Section 3- Repair and Calibration Procedures
Section 3- Repair and Calibration Procedures 1. Refrigerant Removal Procedures 2. Scale/PC Board Recalibration Procedure 3. PC Board Configuration Procedure of AR400 4. Scale Tare Procedure 5. Gauge Calibration
Continental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
Standard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
V46 Series 2-Way Pressure-Actuated Water-Regulating Valves With Union Fittings
Installation Instructions V46 Issue Date 11//1 V46 Series -Way Pressure-Actuated Water-Regulating Valves With Union Fittings Application IMPORTANT: The V46 Series -Way Pressure-Actuated Water-Regulating
Compression Fittings
Advantages o flaring, soldering or other preparation of tubing necessary to assemble. This economical fitting is readily available in a broad selection of styles. anufactured from CA 360, CA 35 or CA 377
PTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings
PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250
FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings
FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125
STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices
Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power
Schroeder Check Test Point System
Perforated polyamide / kevlar hose, 2 mm ID, 5 mm OD, plastic dust cap. L in (mm) P (max) psi (bar) 6 (150) 10,000 (680) 12 (300) 10,000 (680) 24 (610) 10,000 (680) 36 (915) 10,000 (680) 48 (1220) 10,000
Hydraulic Piston Accumulators
Hydraulic Installation All accumulators shipped from the factory will be pre-charged to a nominal pressure in order to seat the piston on the hydraulic cap. In this case the precharge will not be listed
FITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)
// FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator
shutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
CFC2. Float Control For Closed Tanks MODEL. Specifications. Dimensions (In Inches) Reservoir Connection 1" NPT (Typ. Both Ends 2 Places)
MODEL Float Control For Closed Tanks Accurate Liquid Level Control Fully Hydraulic Operation Simple Design, Easy Maintenance No Lubrication Necessary No Gears, No Mechanical Linkage Between Valve and Control
PART NO. UPC DESCRIPTION QTY LBS
24 Iron Pipe Fittings Product Applications For use with brass, copper or iron pipe. Designed for low and medium pressure pipe line connections. Typically used in water, grease, fuels, LP and natural gas,
INSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator
INSTRUCTION MANUAL CVS P37 LP Gas Reducing Regulator The CVS Controls P37 Regulator is a non-relieving, pressure reducing regulator suitable for use in LP gas applications (Natural Gas and Propane). As
TECHNICAL DATA. Page 1 of 12
Page 1 of 12 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking Model H or J Flow Control
TECHNICAL DATA. Pressure Regulation 531a. April 24, 2009
April 24, 29 Pressure Regulation 531a 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking
V48 Series 3-Way Pressure-Actuated Water-Regulating Valves With Union Fittings
Installation Instructions V48 Issue Date 08/30/01 V48 Series 3-Way Pressure-Actuated Water-Regulating Valves With Union Fittings Application IMPORTANT: The V48 Series 3-Way Pressure-Actuated Water-Regulating
TECHNICAL DATA CAUTION
Page 1 of 12 1. DESCRIPTION The Viking Model C-2 Pilot Pressure Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
CRYOGENIC SERIES Regulators, Pressure Gauges, Shut-off Valves, Relief Valves Technology for a Better Future
www.genstartech.com Regulators, Pressure Gauges, Shut-off Valves, Relief Valves CRYOGENIC SERIES Technology for a Better Future GENTEC CRYOGENIC SERIES Cryogenic Shut-off Valves Cryogenic Relief Valves
V-24 OXYGEN LANCE VALVE
INSTRUCTIONS for F-4737-U May, 2009 V-24 OXYGEN LANCE VALVE w/ C -Size Inlet w/ B -Size Inlet V-24 Oxygen Lance with 1/8" Pipe Holder... 9728D65... 2218939 V-24 Oxygen Lance with 1/4" Pipe Holder... 9728A65...
Push-in fittings QB, NPT
General technical data Connecting thread UNF NPT Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating Operating and environmental conditions Operating
CO2 Tank Conversion Kit P.N , P.N , and P.N
Foodservice Group Multiplex Beverage Equipment Installation Instructions for CO2 Tank Conversion Kit P.N. 002247, P.N. 0022505, and P.N. 0025099 Introduction The following instructions cover the installation
Bulletin TCR-104 & 109 Filling and adding to the Glycol pressure system
Bulletin 061013 TCR-104 & 109 Filling and adding to the Glycol pressure system 1. Glycol System and air On this model the glycol system is a closed system, the glycol is not exposed to the air. No external
Quincy QSG Gasends 225, 430, 580, 730 & 850
Quincy QSG Gasends 225, 430, 580, 730 & 850 Parts Manual This publication contains important safety information and should be made available to all personnel who operate and/or maintain this product. Carefully
FILTER TYPE PRESSURE SNUBBER
FILTER TYPE PRESSURE SNUBBER Pressure oscillations and other sudden pressure changes can affect the delicate mechanisms of a pressure gauge or pressure transmitter. This can result in either complete failure
Continental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
H4802, H4802-1, H , and Pole Tampers
SERVICE MANUAL H4802, H4802-1, H-4802-6, and 43227 Pole Tampers Serial Codes FKA, FKF, FKM, FZP, FZR, FZT, and FZV Read and understand all of the instructions and safety information in this manual before
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK
Table I Classes 2B, 3B
Table I Classes 2B, 3B Basic Basic Classes X X + Classes X X + = + Lead Half Angle = + Lead Half Angle Series CL. 2B CL. 3B = - Tol. Tol. Series CL. 2B CL. 3B = - Tol. Tol. #0-80 UNF.0519.0542.0536.0002.0002
Binks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)
INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete
GENERAL DESCRIPTION: The RCV/RCR is a remote controlled oxygen valve and regulator assembly intended for use in experimental aircraft oxygen systems a
5MRCV-0001-00 GENERAL DESCRIPTION: The RCV/RCR is a remote controlled oxygen valve and regulator assembly intended for use in experimental aircraft oxygen systems and related applications. The RCV/RCR
CASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
TXSSN SERIES(LFFPBVT SERIES)
TXSSN SERIES(LFFPBVT SERIES) Lead Free, Full Port Valves Female NPT * Female NPT Dezincification Resistant (DZR) Lead Free Material Thread Conform ANSI B1.20.1 Forged Blow Out Proof Design,O-RING & On
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
12S 1st Stage. -Maintenance Procedure-
12S 1st Stage -Maintenance Procedure- 1 Warning! All maintenance and repair procedures MUST be performed by a Mares authorized Service Center and/or Distributor. Therefore, the information provided below
Coiling Tube with Twist-Proof Fitting
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem
TOTALINE BRASS FITTINGS
LONG NUT SHORT NUT & SHORTER NUT TO CAP NUT MALE CONNECTOR WT. PER LONG NUT 1/8 1.20 4000 25 P806-N2-2 3/16 1.70 2500 25 P806-N2-3 1/4 3.44 1400 50 P806-N2-4 5/16 4.60 900 25 P806-N2-5 3/8 7.90 550 50
3" UC Ultra-Chuck Durable Lightweight Air Inflated Bladder Chuck Operation/Repair Manual. (76.2 mm) DOUBLE E COMPANY, INC.
3" UC-3000 (76.2 mm) Ultra-Chuck Durable Lightweight Air Inflated Bladder Chuck Operation/Repair Manual DOUBLE E COMPANY, INC. 319 Manley Street, West Bridgewater, MA 02379 U.S.A. Tel: (508) 588-8099 /
V43 Pressure Actuated Water Regulating Valve
FANs 125, 121 Product/Technical Bulletin V43 Issue Date 0996 V43 Pressure Actuated Water Regulating Valve The V43 Pressure Actuated Water Regulating Valves are designed to regulate water flow for water-cooled
Installation Instructions and valve Maintenance Rev. 0 of 29/09/15
Pag1 ASSEMBLING PROCEDURE AND VALVE MAINTENANCE 1.0.... Safety Information 2.0.. INTRODUCTION 3.0 VARIATIONS 4.0..ASSEMBLING PROCEDURE FOR THE STEM 5.0 ASSEMBLING PROCEDURE FOR OUTLET CONNECTIONS 6.0 PROCEDURE
Barbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing
Barbed Fittings zfc05 ubl-barb Fittings Compact One-piece Economical Reusable Use with Polyethylene Tubing Hose Barb Fittings All Brass Construction Straight and etric Threads Beaded & Standard Hose Barbs
Flexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
V146 Series 2-Way Pressure-Actuated Water-Regulating Valves
roduct/technical Bulletin V146 Issue Date November 20, 2002 V146 Series 2-Way ressure-actuated Water-Regulating s The V146 Series 2-Way ressure-actuated Water-Regulating s regulate water flow and control
Push-in fittings QB, NPT
General technical data Connecting thread UNF10-32 NPT1/8-27 NPT1/4-18 NPT3/8-18 NPT1/2-14 Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating
PTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings
PTRE Series Assembly A B C D ED EL EO F FL H SD SL T -.001 Width Dia -.002 Offset Hex Shld Width + PTRE-1.00 1.000 0.75 0.437 1.00 0.625 0.48 0.03 7/16-20 0.52 3/16 0.7 0.03 0.78 PTRE-1.125 1.125 0.75
PVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
Prestolok PLM Metal Push-to-Connect Fittings
Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for
CLEAN AGENT FIRE EXTINGUISHING SYSTEM MX 1230 Extinguishing Agent Cylinders
The technical data described herein is for components of the Minimax Fire Products MX 30 Clean Agent System. For design, installation, and operation instructions, refer to the latest edition of the original
Industrial Products. Innovative Solutions for Gas Management Systems. Global Gas Management Technology. Enterprises Innovator Medica Westwinds
Industrial Products Innovative Solutions for Gas Management Systems Global Gas Management Technology Enterprises Innovator Medica Westwinds www.westernenterprises.com GENERAL INFORMATION GENERAL INFORMATION/ORDERING
Variable Area Flow Meters
Variable Area Flow Meters Over sixty years of variable area meter expertise Brooks started designing and manufacturing variable area (VA) meters, also referred to as rotameters, in 1946. Now, with more
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide Date: April 7, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts
Type Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
DN 1/4" to 3" Female BSP - 10 C C Max Pressure : 25 Bars ( up to DN 1 ) Specifications : Anti blow-out stem With PTFE packing Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 3" Female BSP - 10 C + 120 C Max Pressure : 25 Bars ( up to DN 1 ) Specifications : Anti blow-out stem With PTFE packing Full bore Materials
4-Ball Lowers 750cc, 1000cc, 1500cc, and 2000cc Models
Instructions - Parts List Repair Kits Accessory Kits Related Manuals See page 28 4-Ball Lowers 750cc, 1000cc, 1500cc, and 2000cc Models 3A0539L EN Designed for low pressure, high volume circulation of
7625 West New York Street Indianapolis IN Phone: Fax: Order Desk:
Flotec was incorporated on June 30, 1983 as a wholly owned subsidiary of Davidson, Inc. Since the beginning, the core activity has been manufacturing for the medical, industrial, and OEM markets. The products
Shut-off ball valve Type GBC
Data sheet Shut-off ball valve GBC shut-off ball valves, type GBC, are manually operated shut-off valves suitable for bi-directional flow. The GBC valves are used in liquid, suction and hotgas lines in
A Pocket Guide to Air-Line Systems
A Pocket Guide to Air-Line Systems Introduction Type-C supplied-air respirators, more commonly referred to as air-line respirators, are designed to pro vide long-duration respiratory pro tec tion. These
Pressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
Installation Instructions and valve Maintenance Rev. 0 of 21/09/15
ASSEMBLING PROCEDURE AND VALVE MAINTENANCE 1.0.... Safety Information 2.0.. INTRODUCTION 3.0 VARIATIONS 4.0..ASSEMBLING PROCEDURE FOR THE STEM 5.0 ASSEMBLING PROCEDURE FOR OUTLET CONNECTIONS 6.0 PROCEDURE
CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
KOMPLETNÍ PNEUMATICKÉ ROZVODY
KOMPLETNÍ PNEUMATICKÉ ROZVODY KOPR s.r.o. Kněžmost Sokolská 170 294 02 Kněžmost PRICE LIST BRASS QUICK FITTINGS RAP 7 2009 WE OFFER : - quantity discounts - other parts made to customer specifications
Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100
Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to
High Pressure Cylinder Valves
High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series
(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)
This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around
ACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series
M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited
Type 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
GEN-1e CO2 Generator OVERVIEW INSTALLATION PROPANE GENERATORS ONLY NATURAL GAS GENERATORS ONLY
GEN-1e CO2 Generator Custom Automated Products offers economical and safe carbon dioxide generators. They produce CO2 by burning either propane or natural gas. We have designed our CO2 generator to allow
Torque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
Tidland Air Chuck Installation, Operation and Maintenance
TIDLAND WINDING SOLUTIONS Tidland Air Chuck Installation, Operation and Maintenance EN MI 517786 1 L www.maxcessintl.com Tidland Air Chuck MI 517786 1 L Page 2 CONTENTS Assembly Diagram and Parts List...
INDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
Cautions : 1. Be careful when you release the Stop Fitting with some internal pressure
The flow-shut mechanism will operate to stop the air flow when the tube is disconnected and will allow air flow when the tube is connected. The double-passage structure facilitates easy connection and
V248 Series 3-Way Pressure-Actuated. Water-Regulating Valves for High-Pressure
V248 Series 3-Way Pressure-Actuated Water-Regulating Valves for High-Pressure Refrigerants The V248 Series 3-Way Pressure-Actuated Water-Regulating Valves for High-Pressure Refrigerants regulate water
Forged stainless steel ASTM A182 F316
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 8 to 25 (NPS 1/4" to 1") Female - Female NPT - 29 C + 538 C Max Pressure : 138 Bars (Class 800) Specifications
Ball Valves Subsea Series
Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand
MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
DN 1/2" to 2" Female BSP + 0 C C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Female BSP + 0 C + 120 C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve Materials
RA-N radiator valves with integrated presetting and self-sealing tailpiece
Data sheet RA-N radiator valves with integrated presetting and self-sealing tailpiece EN 215 Application Straight version Angle version Horizontal angle version All RA-N valve bodies can be used together
Related Products: Auto Drain Valve. Model/Specifications. Model
Related Products: Auto Drain Valve /600 Drainage is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl
Rocky Mountain Instinct / Pipeline Frame Assembly Guide. Date: March 31, 2017
Rocky Mountain Instinct / Pipeline Frame Assembly Guide Date: March 31, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts Needed...
Rocky Mountain Element Technical Manual. Rev B
Rocky Mountain Element Technical Manual Rev B 1 Table of Contents Materials Required... 3 Suspension Pivot Torque Guide... 4 Small Parts Torque Guide... 5 Assembly Instructions... 6 1) Bearing Installation...
Liquid Level Controllers
Liquid Level Controllers ALL PUMPS LLC-2Y For both pump up and down control. Variable On/Off set points. NDP-15/20/25/32, DP-10/15 & *NDP-40/50/80 LLC-1 Pump up and down versions available. 6 to 12 differential
AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES
Series AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES Standard Air Chucks 374 Flow-Thru Air Chucks 375 Standard Pencil Tire Gauges 376 Dual Foot Tire Gauges 377 Dial Tire Gauges 378 Digital Tire Gauges 379
INSERT FITTINGS INSERT FITTINGS
Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4
precision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com Sales-hoke@circor.com
THREAD/SCREW - Drill & Tap Chart
Machine Screw THREAD/SCREW Drill & Tap Chart Threads Per Inch Min Dia Alum, Brass, & Plasitcs 75% Thread Tap Drills Stainless Steel, Steels & Iron 50% Thread Clearance Hole Drills Close Fit All Materials