THE WHOLE WORLD OF GAS NON-RETURN VALVES AND SAFETY DEVICES IN ACCORDANCE WITH EN 730-2
|
|
|
- Margery Doyle
- 6 years ago
- Views:
Transcription
1 THE WHOLE WORLD OF GAS NONRETURN VALVES AND SAFETY DEVICES IN ACCORDANCE WITH EN 7302
2 SECURE THE ADVANTAGES! Effective synergies and new possibilities abound when you combine the IBEDA product lines of Gas Safety Engineering, Flame Spraying, Gas Manifold Systems and Autogenous Engineering. That means: fleible, affordable, certified and safe products and production solutions from a single supplier, as well as conservation of valuable natural resources. We will never compromise on safety. We are committed to the ongoing development of new products as well as continuing to improve our eisting products. We are able to provide wellengineered and reliable safety solutions for every industrial application, all with certification! GAS SAFETY GAS SAFETY ENGINEERING ENGINEERING GAS MANIFOLD GAS MANIFOLD SYSTEMS SYSTEMS AUTOGENOUS AUTOGENOUS ENGINEERING ENGINEERING FLAME FLAME SPRAYING SPRAYING 2
3 GAS NONRETURN VALVES IN ACCORDANCE WITH EN 7302 The safety devices are used to safeguard plants, pipeline systems and tapping points. The check valves type GRV prevent gas return. The flashbackresistant gas nonreturn valves type GRS prevent gas return as well as flashback if compressed air is used as an oidant. THE GAS NONRETURN VALVES ARE AVAILABLE IN THREE SIZES, DN, DN 32 AND DN 0, WITH THREAD FROM ½ TO 2 AS WELL AS SPECIAL FLANGE CONNECTION UP TO NOMINAL DIAMETER OF DN 0. CERTIFIED SAFETY YOU CAN RELY ON! The safety devices satisfy the requirements specified in all relevant standards and directives. They are tested by BAM in Berlin and are registered under the DVGW certification mark: NG4390CQ0062 (gas nonreturn valves/check valves, Model GRV) and DG4390CQ006 (gas nonreturn valves (flashbackresistant), Model GRS) TECHNICAL DATA Gas nonreturn valves / Check valves Gas nonreturn valves (flashback resistant) Types GRV ½" GRV ¾" GRV " GRV 32 " GRV 32 ¼" GRV 0 ½" GRV 0 2" GRV 0 FLANGE DN 0 GRS ½" GRS ¾" GRS " GRS 32 " GRS 32 ¼" GRS 0 ½" GRS 0 2" GRV 0 FLANGE DN 0 Safety elements DF (dust filter) NV (gas nonreturn valve) FD (flame deflector) Maimum working pressure (bar) bar = 0, MPa Town gas, grid gas (C),,,,, Hydrogen (H),,,,, Natural gas (M) Propan (P) Cleaned Biogas Oygen (O) Nitrogen (N) Inert gases (N) Compressed air (D) Inlet pressure (mbar) Flow rate (Nm/h³)* *All flow rates are measured with air 3
4 GAS NONRETURN VALVES DN CHECK VALVES GRV G ½" ,7 CW CR/NBR GRV G ¾" ,6 CW CR/NBR GRV G " ,7 CW CR/NBR GRV NPT ½" ,7 CW CR/NBR GRV NPT ¾" ,6 CW CR/NBR GRV NPT " ,7 CW CR/NBR GAS NONRETURN VALVES DN 32 CHECK VALVES GRV32 G " 60 9,0 CW CR/NBR GRV32 G ¼" 60 00, CW CR/NBR GRV32 NPT " 60 9,0 CW CR/NBR GRV32 NPT ¼" 60 00, CW CR/NBR GAS NONRETURN VALVES DN 0 CHECK VALVES GRV0 G ½" ,6 CW CR/NBR GRV0 G 2" ,4 CW CR/NBR GRV0 NPT ½" ,7 CW CR/NBR GRV0 NPT 2" , CW CR/NBR GRV0 FLANGE DN ,3 CW CR/NBR GAS NONRETURN VALVES DN Flashbackresistant if compressed air is used as oidant GRS G ½" 03,2 CW CR/NBR GRS G ¾" 2,2 CW CR/NBR GRS G " 08, CW CR/NBR GRS NPT ½" 03,2 CW CR/NBR GRS NPT ¾" 2,2 CW CR/NBR GRS NPT " 08, CW CR/NBR GAS NONRETURN VALVES DN 32 Flashbackresistant if compressed air is used as oidant GRS32 G " 6 0 2, CW CR/NBR GRS32 G ¼" 6 7 2,2 CW CR/NBR GRS32 NPT " 6 0 2, CW CR/NBR GRS32 NPT ¼" 6 7 2,2 CW CR/NBR GAS NONRETURN VALVES DN 0 Flashbackresistant if compressed air is used as oidant GRS0 G ½" 94 7,9 CW CR/NBR GRS0 G 2" CW CR/NBR GRS0 NPT ½" CW CR/NBR GRS0 NPT 2" , CW CR/NBR GRS0 FLANGE DN ,9 CW CR/NBR 4
5 FOR THERMAL PROCESS PLANTS AND PIPELINE SYSTEMS GAS NONRETURN VALVES (CHECK VALVES) GRV, GRV 32 AND GRV 0 Gas nonreturn valves for town gas, grid gas, natural and liquid gas, Methane (cleaned biogas), Hydrogen, Oygen, Nitrogen, inert gases and compressed air GAS NONRETURN VALVES (FLASHBACKRESISTANT) GRS, GRS 32 AND GRS 0 Gas nonreturn valves (flashback resistant) for town gas, grid gas, natural and liquid gas, Methane (cleaned biogas) HIGHLIGHTS Very low cracking pressures of 4 6 mbar High flow rates, minimal pressure loss Positionindependent installation Compact design Prevents dangerous gas mitures on the inlet side Stainless steel dust filter with large filter surface ensures a long service life DVGWcertified APPLICATION Application areas of our products are thermal process plants according to EN 7462 as well as heating processes for welding, cutting and related processes that are operated with mitures of fuel gas and air. e.g. in a steel mill
6 IBEDA GAS SAFETY ENGINEERING WORLDWIDE IN USE IBEDA Sicherheitsgeräte und Gastechnik GmbH & Co. KG Bahnhofstraße Neustadt/Wied Tel. +49(0) Fa +49(0) We reserve the right to make technical changes without notice. No liability for printing errors. All trademarks, logos and images are aknowledged. Printed in Germany WM
IBEDA GAS MIXERS HIGHEST PRECISION FOR YOUR WELDING AND CUTTING PROCESSES
IBEDA GAS MIXERS HIGHEST PRECISION FOR YOUR WELDING AND CUTTING PROCESSES GAS SAFETY ENGINEERING GAS MANIFOLD SYSTEMS AUTOGENOUS ENGINEERING FLAME SPRAYING GAS MIXERS IBEDA GAS MIXERS FOR MANY AREAS OF
How Flashback Arrestors Work
What are Flashback Arrestors Flashback Arrestors prevent reverse flow of gases with built-in check valves and extinguishes flashback fire with a stainless steel sintered element. How Flashback Arrestors
Safety Shut-off Valve SSV
Safety Shut-off Valve SSV 8200-8300 < Accurate operation < Compact design < Easy maintenance Applications The safety shut-off valve is designed for use in gas distribution, and pressure regulation systems.
flashback arrestors Regulator end
flashback arrestors Regulator end Regulator end flashback arrestors are safety devices fitted to the outlet of a regulator. They incorporate a number of features designed to protect upstream equipment
Pressure reducing valves Index
Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel
Gas Filters DN15 DN300. delta-elektrogas.com EE151 03/17
FG Gas Filters DN15 DN300 delta-elektrogas.com EE151 03/17 FG Gas Filters Contents Description.. 2 Features.. 2 Functioning and application. 3 Technical specifications 4 Gas flow chart (pressure drop)
RR 16 Commercial & Industrial Regulator
Gas RR 16 Commercial & Industrial Regulator Applications The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations
Safety Shut-Off Valve HON 720
Safety Shut-Off Valve HON 70 Product information serving the gas industry worldwide Application, Characteristics, Technical Data Application main safety device for gas pressure regulating stations suitable
VRD Series VRD40.xxxUx Double Valves for use with SKP... electro-hydraulic actuators
VRD Series VRD40.xxxUx Double Valves for use with SKP... electro-hydraulic actuators Document No. 7649 VRD40.xxxUx ISO 9001 and 14001 REGISTERED FIRM Only with series SKPxx.xxxUx actuators Description
Safety. Operating instructions Manual valves AKT, flow adjusting cocks GEHV, GEH, LEH DANGER. Contents WARNING CAUTION. Changes to edition 03.
08 Elster GmbH Edition 09.8 Translation from the German 33000 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Manual valves, flow adjusting cocks GEHV, GEH, LEH Contents Manual
safety shut-off Valve HON 703 / HON 704
safety shut-off Valve HON 703 / HON 704 Product information serving the gas industry worldwide Applications, characteristics, technical data Applications Main safety device in gas pressure regulating systems
TRZ 03-K Volumeter. Proven Technology. Superior Performance. TRZ 03-K Volumeter is a Turbine Gas Flowmeter for Secondary Gas Metering.
TRZ 0-K Volumeter TRZ 0-K Volumeter is a Turbine Gas Flowmeter for Secondary Gas Metering. TRZ 0-K Turbine Gas Flowmeter continues the tradition of Honeywell s field-proven turbine meter technology, delivering
Gas Filters DN15 DN300. elektrogas.com EE151 06/13
FG Gas Filters DN15 DN300 elektrogas.com EE151 06/13 FG Gas Filters Contents Description.. 2 Features.. 2 Functioning and application. 3 Accessories and optionals 4 Technical specifications 4 Gas flow
cooled, Heated ATH 2800 MT, DN 250 ISO-F, External drive electronics, Water cooled, Heated
ATH 2800 MT, DN 250 ISO-F, External drive electronics, Water cooled, Heated ATH 2800 MT, DN 250 ISO-F, External drive electronics, Water cooled, Heated ATH 2800 MT, DN 250 ISO-F, External drive electronics,
Y-Pattern Strainer Valves Range
Y-Pattern Strainer Valves Range Conex Bänninger Y-Pattern Strainer Valves During installation and subsequent operation, debris and scale flowing through the system can cause considerable damage to pipeline
Safety. Operating instructions Manual valves AKT, flow adjusting cocks GEHV, GEH, LEH DANGER. Contents WARNING CAUTION. Changes to edition 06.
06 Elster GmbH Edition 09.6 Translation from the German 33000 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Manual valves, flow adjusting cocks GEHV, GEH, LEH Contents Manual
Combined Pressure / Vacuum Relief Valve KITO VD/o
KITO VD/o DN D H kg* vacuum setting (mbar) pressure DIN ANSI DIN ANSI min max min max** 50 PN 16 2 220 332 351 11 3 50 10 75 80 PN 16 3 260 367 387 145 3 50 10 70 100 PN 16 4 260 368 393 178 3 50 10 80
SERIES 30. Spring Operated Tank Blanketing Valve PROTECTOSEAL.
SERIES 30 PROTECTOSEAL 1 2" NPT inlet and outlet standard Direct acting valve mechanism Optional flanged or threaded inlet and outlet connections available Inlet gas pressures from 10 PSIG to 200 PSIG
The affordable consumption counter for compressed air and gases R 3 /4 (DN 20)
VA 420 new The affordable consumption counter for compressed air and gases R 1 /4 (DN 8) DN 15 R 3 /4 (DN 20) DN 25 R 1 1 /4 (DN 32) DN 40 R 2 (DN 50) With mit und and ohne without Flansch flange Intelligent
RR 16 Commercial & Industrial Regulator
RR 16 Commercial & Industrial Regulator The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations where accurate
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressors Greatest Performance Range of Liquid Ring Compressors Worldwide The ability to compress wet, saturated or dirty
Blanketing Valve ZM-R. low pressure reducing valve
Blanketing Valve low pressure reducing valve ZMR Ø a / c DN f e Pressure range: Supply pressure: up to +16 bar / +6424 inch W.C. Set pressure for function: up to +500 mbar / +200 inch W.C. Set pressure
Thermal Energy Flowmeter Model KEC. Application Range. Special Features
Thermal Energy Flowmeter for gases measuring monitoring analysing KEC O O Direct mass flow rate measurement of gases OMeasuring O accuracy: ± 0.3% of full scale ±1.5% of reading on request: ± 0.3% of full
Huat Siang Hardware Sdn. Bhd. Wire Mesh. Steel Sheet Piles. 1 of 33
Huat Siang Hardware Sdn. Bhd. Wire Mesh Steel Sheet Piles 1 of 33 2 of 33 Rails Purlins 3 of 33 4 of 33 Plates Plates 5 of 33 Hollow Sections HOLLOW SECTIONS SUPPLIER IN MALAYSIA - Huat Siang Hardware
High Pressure Tube Unions
High Pressure Tube Unions DILO. Sustainably tight. Made in Germany I am totally convinced by the high safety level even under extreme pressure. Christian Komm, Siemens AG, Power Generation DILO High pressure
Installation and Commissioning Instructions for GÄBLER-piston slide valves, especially for gaseous oxygen pipelines
Installation and Commissioning Instructions for GÄBLER-piston slide valves, especially for gaseous oxygen pipelines 1. General: GÄBLER-piston slide valves are shut-off valves of a high standard that are
Flow metering in gases Introduction to COMBIMASS family
Flow metering in gases Introduction to COMBIMASS family - physical principle, basic information - different types of instruments, pricing & delivery time Sales Training Germany October 17 th to 19 th,
Valves. Diaphragm shut-off valves, kidney-type
Valves Diaphragm shut-off valves, kidney-type Application When leakage of even the smallest quantities must be avoided with certainty For maximum requirements to operating safety For maximum requirements
Valvex Valves for Mining Applications
Valvex Valves for Mining pplications roven technology The Electronic Drive Systems product group at Voith Turbo GmbH & Co. KG develops and produces explosion-proof Valvex solenoid valves and valve assemblies.
Tubes Components Valves Units Engineering SO EVERYTHING KEEPS FLOWING. Safety valves Bunging valves Vacuum valves Tank dome fittings
SO EVERYTHING KEEPS FLOWING Safety valves Bunging valves Vacuum valves Tank dome fittings Reliable reaction at the right moment Safety components are part of our everyday life. Like anti-skid systems in
safety Shut-Off Valve HON 721
safety Shut-Off Valve HON 7 product information serving the gas industry worldwide safety shut-off valve HON 7 safety shut-off valve HON 7 Application, Characteristics, Technical Data Application safety
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators Technical Instructions Document No. 155-51P5 VG August 1, 01 VGG VGD0 VGD0 Description Only when assembled to Series SKP actuators
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators Technical Instructions Document No. 155-51P5 VG August 11, 005 GAS009R1 VGG VGD0 VGD0 Description Only when assembled to SKP
Your Specialist and Partner in the Field of Pharmaceutical Applications
Your Specialist and Partner in the Field of Pharmaceutical Applications Pressure Reducer We reserve the right to make technical changes. Images non-binding. 08/2014 CrNiMo stainless steel (1.4435*), deep-drawn,
Gas Appliance Pressure Regulators and. Line Pressure Regulator. FRS 7../6 Series FRS 5... Series
Gas Appliance Pressure Regulators and Line Pressure Regulators FRS../6 Series FRS 5... Series CSA Certified ANSI Z21.18 CSA 6.3 as a Gas Appliance Pressure Regulator ANSI Z21.80 CSA 6.22 (FRS/6 series
RELIEF VALVES. Type VS- FL. Process Management TM
RELIEF VLVES Type VS- FL Process Management TM Relief Valves This series of axial flow relief valves was designed to meet a wide range of applications. Large appreciation from worldwide customers is a
Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve
Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve ANSI version Application Pressure reducing valve for set points from 0.075 to 150 psi (5 mbar to 10 bar) Valve size NPS ½ to 2 1) (DN
SERIES 10. Pilot Operated Tank Blanketing Valve, 2" PROTECTOSEAL.
SERIES 10 PROTECTOSEAL 2" NPT inlet and outlet standard Pilot operated design provides tight operating band Optional inlet and outlet connections available Inlet gas pressures from 40 PSIG to 130 PSIG
Differential Pressure Transmiter
Differential Pressure Transmiter Description The is an economical alternative to established differential pressure transmitters. It combines state of the art electronics and a high performance sensor;
better measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars.
Simply a question of better measurement SCHMIDT Flow Sensor SS 20.261 The cost-effective alternative in pressurised systems up to 10 bars. Compressed air technology Industrial processes A cost analysis
Gas Pressure Regulator HON 200
Product information serving the gas industry worldwide Applications, characteristics, technical data Application Gas supply to municipal, industrial and individual consumers Regulator for low-load rails
V83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability > > Modular design - Maxseal valves > > able terminations inside coil housing
Noth American 7347 High Pressure Gas Regulators
Combustion Noth American 7347 High Pressure Gas s Bulletin 7347 7347 s reduce high gas supply pressures to practical use levels. Since capacities will vary with the pressure drop across the regulator (see
Brief history in the Biogas sector. Compressor features. Applications. Product range. Experience
March 2018 Brief history in the Biogas sector Compressor features Applications Product range Experience 2005 FORNOVO GAS supplied the first compressor in a biogas plant in Iceland to compress biomethane
Slam Shut Valves SBC 782
Slam Shut Valves SBC 782 SBC 782 > Slam shut valves Introduction SBC 782 is a compact safety device (SAV) which quickly intercepts gas flow whenever the pressure under monitoring reaches preset limits,
North American Orifice Metering System
Combustion North American Orifice Metering System 8697 and M8697 Metering Orifices accurately measure gas flows to industrial burners. They are compact, inexpensive, and can be installed in individual
Line Pressure Regulator. Class I or Class II. FRS 7../6 Series
Line Pressure Regulators Class I or Class II FRS 7../6 Series CSA Certified ANSI Z21.80 / CSA 6.22 as a 5 PSI Class I or Class II Line Pressure Regulator File # 1205910 NPT Threaded Versions FRS 705/6
KMT. Thermal Mass Flow Meter. for Compressed Air and Gases. Measuring range: m3n/h m3 N
Thermal Mass Flow Meter for Compressed Air and Gases measuring monitoring analysing KMT Measuring range: 0.32... 63 m3n/h... 3.5... 1400 m3 N /h Accuracy: ±2,5% of reading + 0,15% of full scale p max :
Types ACE95 and ACE95Sr Tank Blanketing Valves
October 2014 Types ACE95 and ACE95Sr Tank Blanketing Valves W9133 W8155 Figure 1. Type ACE95 Tank Blanketing Valve Figure 2. Type ACE95Sr Tank Blanketing Valve Features Fully Balanced Pilot Design Reduces
O NEof Premium tools for professionals!
O NEof 6.000 Premium tools for professionals! 1 System Overview 190 Testing of Water Lines & Containers Testing Pumps 191-193 Testing of Gas- & Water Lines Analogue Testing Device 194-195 Testing of Waste
Differential pressure
Differential pressure 9 Overview Page 200 VEGADIF 65 Page 202 Chemical seal Page 204 Accessory Page 208 199 VEGADIF For differential pressure, level and flow measurements Measuring principle The sensor
GasBloc Multifunctional gas control Combined regulator and safety shut-off valves Electrically modulating GB-M(P) 055 D01
Gasloc Multifunctional gas control Combined regulator and safety shut-off valves Electrically modulating G-M(P) 055 D01 Two stage operating mode G-(LEP)Z 055 D01 3.0 Printed in Germany Edition 05.11 Nr.
Old documentation - Only for your information! Product is not available any more!
Gasloc Multifunctional gas control Combined regulator and safety shut-off valves Electrically modulating G-M(P) 055 D01 Two stage operating mode G-(LEP)Z 055 D01 3.0 Printed in Germany Edition 05.11 Nr.
T 2523 EN Type 2406 Excess Pressure Valve Self-operated Pressure Regulators ANSI version
T 2523 EN Type 2406 Excess Pressure Valve Self-operated Pressure Regulators ANSI version Application Excess pressure valve for set points from 0.075 to 150 psi (5 mbar to 10 bar) Valve size NPS ½ to 2
pressure regulator Zero pressure regulator Proportional pressure regulator Compressed air-controlled
Pressure regulator FRNG Zero pressure regulator Proportional pressure regulator Compressed air-controlled pressure regulator 4.14 Printed in Germany Edition 01.18 Nr. 219 570 Technical description The
Micro Motion 7812 Fiscal Gas Density Meter
Product Data Sheet PS-001162, Rev. B April 2009 Micro Motion 7812 Fiscal Gas Density Meter Micro Motion density and concentration meters are built to tackle the most demanding process and fiscal applications.
Self-operated Pressure Regulators for special applications
Self-operated Pressure Regulators for special applications Type 2357-31 Pressure Build-up Regulator with safety function and integrated excess pressure valve Application Pressure regulators for cryogenic
Your local gas generation partner. Precision series Modular gas generation solution for GC.
Your local gas generation partner Precision series Modular gas generation solution for GC www.peakscientific.com Perform with Precision Specifically designed and engineered for GC laboratory applications,
Operating instructions - Translation of the original -
Operating instructions - Translation of the original - 5091 xxx 000-xxx Check valve (O-Ring - design) DN 10 - DN 100, DN 1inch - DN 4inch EPDM Male part - welding end (G-S) 23.2.12 KIESELMANN GmbH Paul-Kieselmann-Str.4-10
Y692VB Series Vacuum Breaker
Y692VB Series Vacuum Breaker Bulletin 71.3:Y692VB June 2009 W7429 Figure 1. Type Y692VB Vacuum Breaker Introduction The Y692VB Series direct-operated vacuum breakers are used for the precise control of
OVERVIEW PRODUCTS AND PRICES PRICE LIST 2017/2018 GAS SAFETY ENGINEERING GAS MANIFOLD SYSTEMS AUTOGENOUS ENGINEERING FLAME SPRAYING
OVERVIEW PRODUCTS AND PRICES PRICE LIST 2017/2018 GAS SAFETY ENGINEERING GAS MANIFOLD SYSTEMS AUTOGENOUS ENGINEERING FLAME SPRAYING IBEDA PRODUCT GROUPS TABLE OF CONTENTS GAS SAFETY ENGINEERING TECHNICAL
ATEX VACUUM PUMPS AND GAUGES CHEMICALLY RESISTANT, OIL-FREE AND SAFE
ATEX VACUUM PUMPS AND GAUGES CHEMICALLY RESISTANT, OIL-FREE AND SAFE ATEX CHEMISTRY DIAPHRAGM PUMPS. ATEX VARIO CHEMISTRY DIAPHRAGM PUMPS. Chemistry diaphragm pumps, vacuum systems and gauges for use in
Types ACE95 and ACE95Sr Tank Blanketing Valves
Types ACE95 and ACE95Sr Tank Blanketing Valves Bulletin 74.1:ACE95 May 2010 W9133 W8155 Figure 1. Type ACE95 Tank Blanketing Valve Figure 2. Type ACE95Sr Tank Blanketing Valve Features Fully Balanced Pilot
Flow and Energy Measurement F-5400 THERMAL MASS FLOW METER
THERMAL MASS FLOW METER s Series Thermal Mass Flow Meters provide accurate and reliable flow measurement for natural gas, compressed air, and other industrial gas applications. Natural Gas Compressed Air
Wescol WESCOL LIMITED
Introduction Limited offer a comprehensive range of industrial gas control equipment, providing solutions for cutting, welding, heating and gas distribution. One of only two manufacturers of such product
Si C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
Type ACE95jr Tank Blanketing Valve
Type ACE95jr Tank Blanketing Valve Features Fully Balanced Plug Design Reduces Inlet Pressure Sensitivity Bulletin 74.1:ACE95JR May 2010 Stainless Steel Construction Available High Sensitivity Self-Contained
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressor Systems Engineered-to-Order Liquid Ring Compressor Systems Unmatched experience Nash liquid ring compressors are
GasBloc Multifunctional gas control Combined regulator and safety shut-off valves Integrated gas-air system GB-GD 057 D01
Gasloc Multifunctional gas control Combined regulator and safety shut-off valves Integrated gas-air system G-GD 057 D01 Zero pressure regulator G-ND 057 D01 3.12 Technical description Multifunctional gas
Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve
Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve Application Pressure reducing valve for set points from 5 mbar to 10 bar Nominal size DN 15 to 50 Nominal pressure PN 16 to 40 Suitable
Self-operated Regulators Accessories Differential Pressure and Flow Regulators
Self-operated Regulators Accessories Differential Pressure and Flow Regulators Compression-type fittings Needle valves Compensation chambers Orifice plates Welding neck flanges Control lines Application
FILTER REGULATOR. We produce with artistic attitude.
FILTER REGULTOR We produce with artistic attitude. DURY from Germany is expert in fluid control; the products are mainly for control and measurement of various gases, liquid pressure and flow, including
SMART Explosion. Efficient Boiler Cleaning with Explosion Generators
SMART Explosion Efficient Boiler Cleaning with Explosion Generators Problem and Solution The use of solid fuels, such as coal, waste or biomass, is liable to intense fouling of the steam generator heating
Type R622 Pressure Reducing Regulator
Type R622 Pressure Reducing Regulator June 2010 Compact Design Protective Inlet Screen High Capacity Internal Relief Light Weight W8806 Inlet and Outlet Pressure Gauge Taps Figure 1. Type R622 Pressure
VESSEL & REACTOR VALVES. VS Series SPRAY & RINSE VALVES PROCESS VALVES
VS Series VESSEL & REACTOR VALVES SPRAY & RINSE VALVES PROCESS VALVES CLEANING VESSELS OR REACTORS WITHOUT OPENING TO ATMOSPHERE Spray & Rinse Valves Code: VRR-VRS Automatic models use an electric or air
Type BBS-03, BBS-05, BBS-06, BBS-25
Type BBS-03, BBS-05, BBS-06, BBS-25 Sterile connection elements Sterile Verbindungselemente Raccords union stériles Operating Instructions Bedienungsanleitung Manuel d utilisation 1. THE OPERATING INSTRUCTIONS
Fuel Filters DN15 DN25. elektrogas.com DE
FF Fuel Filters DN15 DN25 elektrogas.com DE180 0914 FF Fuel Filters Contents Description.. 2 Features.. 2 Functioning and application. 3 Accessories and optionals 4 Technical specifications 4 Gas flow
Types ACE95 and ACE95Sr Tank Blanketing Valves
August 2013 Types ACE95 and ACE95Sr Tank Blanketing Valves W9133 W8155 Figure 1. Type ACE95 Tank Blanketing Valve Figure 2. Type ACE95Sr Tank Blanketing Valve Features Fully Balanced Pilot Design Reduces
PRESSURE REGULATOR LBM SERIES
VIRTUAL CATALOGUE FAIL TO OPEN REGULATOR HIGH FLOW COEFFICIENT WIDE PRESSURE-REGULATION RANGE FAST RESPONSE PRESSURE REGULATOR LBM SERIES FULL SEAL AT ZERO FLOW CAN BE SUPPLIED WITH MINIMUM / MAXIMUM PRESSURE
Cellular Gas Filters DF 100. Product Information
Cellular Gas Filters DF 100 Product Information Reserve technical changes! Reprint not permitted! Table of Contents Application, Features, Technical Data 4 Application 4 Features 4 Technical Data 5 Design
Line Pressure Regulators Class I or Class II. FRS 7../6 Series
Line Pressure Regulators Class I or Class II FRS 7../6 Series CSA Certified ANSI Z21.80 / CSA 6.22 as a 5 PSI Class I or Class II Line Pressure Regulator File # 1205910 NPT Threaded Versions FRS 705/6
V DFX Series. Direct-Operated Tank Blanketing Regulator Manual D103808X012
V2015.2 DFX Series Direct-Operated Tank Blanketing Regulator Manual D103808X012 Contents 1. Introduction... 3 2. Specifications... 3 3. Features... 3 4. Dimensions... 4 5. Principle of Operation... 4 6.
Do you require maximum pressure stability in your gas supply?
TECHNOLOGY FOR GASES Do you require maximum pressure stability in your gas supply? Rely on 40 years of experience in dome-loaded pressure regulation. Dynamic WITT regulators ensure a stable, adaptable
Slam Shut Valves SCN
Slam Shut Valves SCN SCN > Slam shut valves Introduction SCN is a compact safety device (SAV) which quickly intercept gas flow whenever the pressure under monitoring reaches a pre-set limits, or whenever
VALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44
INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44 Pressure Reducing Valve PRV44 - Operation and Installation - 1 - manual PRV44-16-ENG JULY 2016 INDEX PAGE 1 IDENTIFICATION PLATE
Mass Flow Meter (MFM) for Gases
873 Mass Flow Meter (MFM) for Gases Direct flow measurement by MEMS- Technology for nominal flow rates from 1 ml N /min to 8 l N /min (N 2 ) High accuracy Short response time Compact design and digital
BGA158, BGA171 and BGA110 Series Shutoff Gas Valve
Installation Instructions BGA Series Issue Date October 3, 2017 BGA158, BGA171 and BGA110 Series Shutoff Gas Valve Applications The BGA Series shutoff gas valve is an electrically operated gas valve that
Actuator HON 670 / 671
Actuator HON 670 / 67 Product information serving the gas industry worldwide Applications, characteristics, technical data Application The actuators HON 670 (K6, K8) and HON 67 (K7) are used to trigger
Flow VA 520. incl. temperature measurement. Intelligent solutions for ac- for compressed air and gases R 1/4 (DN 8) DN 15 R 3/4 (DN 20) DN 25
VA 520 incl. temperature R 1/4 (DN 8) DN 15 R 3/4 (DN 20) DN 25 R 1 1/4 (DN 32) DN 40 R 2 (DN 50) Intelligent solutions for ac- for compressed air and gases work according to the approved calorimetric
Flow VA 520. incl. temperature measurement. Intelligent solutions for ac- for compressed air and gases R 1/4 (DN 8) DN 15 R 3/4 (DN 20) DN 25
VA 520 incl. temperature R 1/4 (DN 8) DN 15 R 3/4 (DN 20) DN 25 R 1 1/4 (DN 32) DN 40 R 2 (DN 50) Intelligent solutions for ac- for compressed air and gases work according to the approved calorimetric
Micro Motion 3098 Gas Specific Gravity Meter
Product Data Sheet PS-001188, Rev. B April 2009 Micro Motion 3098 Gas Specific Gravity Meter Micro Motion density and concentration meters are built to tackle the most demanding process and fiscal applications.
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressors Greatest Performance Range of Liquid Ring Compressors Worldwide The ability to compress wet, saturated or dirty
Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848
Cal/OSHA Gas Systems for Welding GAS WELDING Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848 When performing gas welding, the following precautions, work procedures,
Type 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator
January 2009 Type 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator Introduction The Type 310A pilot-operated high-pressure regulator (Figure 1) is used where high capacity
Alkylphosphines. Storage and Handling Recommendations
Alkylphosphines Storage and Handling Recommendations 2 The Phosphine Specialties Group has been producing phosphine and phosphine derivatives on a large scale for a number of years and the handling procedures
Regulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
SV60 Safety valves. for use with steam, gas and liquids
SV60 Safety valves for use with steam, gas and liquids Spirax Sarco safety valves - protecting people, plant and profit The SV60 spring loaded full lift safety valve range from Spirax Sarco has been designed
Operating instructions - Translation of the original -
Operating instructions - Translation of the original - 5093 xxx 000-xxx Check valve DN25 - DN100 EPDM O-Ring-design Intermediate flanged with welding ends 27.1.12 KIESELMANN GmbH Paul-Kieselmann-Str.4-10
Series 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-1 B Pressure Reducing Valve Type 44-6 B Excess Pressure Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT