FILTER REGULATOR. We produce with artistic attitude.
|
|
- Alison Mosley
- 6 years ago
- Views:
Transcription
1 FILTER REGULTOR We produce with artistic attitude.
2 DURY from Germany is expert in fluid control; the products are mainly for control and measurement of various gases, liquid pressure and flow, including all kinds of, back pressure, volume boosters, electronic proportional, flow control valves, FRL units, pressure transducers and pressure gauge. DURY products are widely used in industry, medical equipment manufacturing, hemical, pharmaceutical, electronics industry and laboratory in the world. Regulator products cover an extensive product line ranges from large to small port, high pressure to low pressure. We will be your most professional pressure control equipment supplier in hina. DURY has established inventory distribution system in Mainland hina, Most commonly used models can be shipped within 24 hours after order being released, the expert team in hina will be always at your service, solving your problems in gas system, fluid technology and electronic technology, and we will choose the most suitable products to meet the requirements of your condition. ontents 548 Miniature Pressure Regulator /12 Midi Pressure Regulator Pressure Regulator Made of Plastic Regulator,Stainless Steel Throughout, up to 50 bar Stainless Steel Regulator /75/105 ube Pressure Regulator /21 Maxi Pressure Regulator D Pressure Regulator Series D, up to 30 bar Pressure Regulator down to -40 / -40 F M Regulator Made of rass, up to 50 bar
3 Miniature Pressure Regulator 548 Regulator of small and compact design, ideal for limited space conditions. compressed air or non-corrosive gases Supply pressure max. 11 bar for plastic bowl, max. 21 bar for metal bowl djustment by plastic knob with snap-lock Relieving function relieving G 1 8 on both sides of the body, screw plugs supplied element 20 µm, optionally 5 µm, made of polypropylene owl plastic or metal version Drainage manual drain as standard, for max. 21 bar semiautomatic drain as option, for max. 12 bar Temperature range 0 to 50 / 32 F to 122 F for plastic bowl and semiautomatic drain version 0 to 80 / 32 F to 17 F for metal bowl Material ody: aluminium Elastomer: NR/una-N Spring cage: glass fibre-reinforced plastic Inner valve: brass owl: polyurethane or zinc die-cast G 1 8 and G¼ Dimensions owl Flow Supply onnection Pressure Order Design apacity rate max. thread range number mm mm mm made of l m ³ /h* 1 l/min* 1 bar G bar Miniature filter regulator with manual drain, relieving, Versorgungsdruck max. 13 barw/o pressure gauge, 20 µm filter element plastic G H H H metal DH DH DH plastic G¼ H H H metal DH DH DH H 5 µm filter element G. NPT connection thread N non-relieving without relieving function K semiautomatic drain RK500SY, max. 12 bar M fibreglass spring cage max. 80 / 17 F, metal bowl D..X DH ccessories, enclosed pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 M * 2 mounting bracket made of steel W30-02 mounting nut made of plastic M30x1,5K made of aluminium M30x1,5 gauge G 1 8 RK500SY Ø W30-02 * 1 at 7 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 02 = bar, 04 = 0 4 bar, 10 = 0 10 bar H hina website:
4 Midi Pressure Regulator 11 / 12 pressure regulator with high flow and of small design. compressed air or non-corrosive gases Supply pressure max. 17 bar for metal bowl with sight glass, max. 21 bar for metal bowl without sight glass djustment by plastic knob with snap-lock at 11, by T-handle with locknut at 12 Relieving function relieving G¼ on both sides of the body, screw plugs supplied element 40 µm, optionally 5 µm, made of polypropylene owl metal version with sight glass, optionally without Drain manual drain as standard, for max. 21 bar semiautomatic or automatic drain as option, for max. 12 bar Temperature range 0 to 70 / 32 F to 158 F for metal bowl with sight glass 0 to 80 / 32 F to 17 F for metal bowl without sight glass 0 to 50 / 32 F to 122 F for semiautomatic or automatic drain Material ody: zinc die-cast owl: zinc die-cast Inner valve: brass, optionally stainless steel Elastomer: NR/una-N, optionally FKM Spring cage: glass fibre-reinforced plastic at 11, zinc die-cast at 12 G¼ up to G½ Dimensions owl Flow Supply onnection Pressure Order Design apacity rate max. thread range number mm mm mm made of / with l m ³ /h* 1 l/min* 1 bar G bar Midi filter regulator manual drain, relieving, max. 17 bar Versorgungsdruck max. without 13 barpressure gauge, 40 µm filter element metal / G¼ WJ sight glass WJ WJ WJD metal / G WJ sight glass WJ WJ WJD metal / G½ WJ sight glass WJ WJ WJD 11-02WJ with adjusting knob T-handle locknut included, height 215 mm µm filter element G. bowl w/o sight glass max. 21 bar, 0 to 80 / 32 F to 17 F, for appropriately conditioned compressed air down to -30 /-22 F D.. NPT connection thread N non-relieving without relieving function K semiautomatic drain RK500SY, max. 12 bar M automatic drain S05MD, max. 12 bar R FKM elastomer inner parts made of brass X4 ccessories, enclosed pressure gauge Ø 50 mm, 0 * 2 bar, G 1 4 M * 2 mounting bracket made of steel W45-02 mounting bracket made of plastic M45x1,5K made of aluminium M45x1, WJ with T-handle gauge G 1 4 gauge G 1 4 RK500SY S05MD W45-02 * 1 at 8 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 02 = bar, 04 = 0 4 bar, 10 = 0 10 bar, 25 = 0 25 bar 11-02WJ hina website:
5 Pressure Regulator Made of Plastic Modular pressure filter regulator which can be interlocked with all other instruments of the same series. compressed air or non-corrosive gases Supply pressure max. 15 bar djustment by plastic knob with snap-lock Relieving function relieving G 1 8 or G¼ at series 095, on both sides of the body, screw plugs supplied element 20 µm, optionally 5 µm, made of sintered polyethylene owl plastic version with bayonet catch, threaded connection at series 042 Drainage manual drain with semiautomatic drain, optionally automatic drain Temperature range 0 to 50 / 32 F to 122 F Material ody: nylon, POM at series 042 Inner valve: brass owl: polyamide Thread insert: brass Elastomer: NR/una-N G¼ up to G1 Dimensions owl Flow Supply onnection Order Design apacity rate max. thread number mm mm mm made of / with l m ³ /h* 1 l/min* 1 bar G Plastic filter regulator manual drain with semiautomatic drain, relieving, max. 15 bar Versorgungsdruck w/o max. gauge, 13 pressure bar range 0 8 bar, 20 µm filter element plastic / G¼ H bowl guard G H G½ H G½ H G¾ 080-0H G H µm filter element for 042 to G. for G. non-relieving without relieving function all K bar pressure range for 042 to for bar pressure range for 042 to D for D automatic drain R ccessories, enclosed pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 for 042 M * 2 Ø 50 mm, 0 * 2 bar, G 1 8 for 050 to 080 M * 2 Ø 3 mm, 0 * 2 bar, G¼ for 095 M * 2 mounting bracket made of steel, mounting nut at the device for 042 W30-01 for 050 to 080 W42-01 for 095 W F D Ø E W W W gauge G 5 gauge G 1 hose connection x L K Series D Ø E F K L / * 1 at 10 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar, 1 = 0 1 bar H hina website:
6 Regulator Made of Stainless Steel Throughout, up to 50 bar 3000 pressure regulator with bowl without sight glass completely made of stainless steel. pplication examples are the chemistry, petroleum processing as well as food industry and medical technology. compressed air, gases or liquids Supply pressure max. 50 bar (without drain) djustment by hexagon socket crew with locknut Relieving function relieving, optionally non-relieving G¼ on both sides of the body, G 1 8 at , one screw plug supplied element 50 µm, optionally 5 µm, made of stainless steel owl stainless steel version without sight glass Drain screw plug as standard, optionally manual drain (max. 30 bar) or automatic drain (max. 1 bar) Temperature range -20 to 0 / -04 F to 140 F for NR/una-N, EPDM or FKM -20 to 130 / -04 F to 2 F for high temperature version down to -40 / -40 F for stainless steel diaphragm Material ody: stainless steel 31L, material no O-rings: NR/una, optionally EPDM or FKM owl: stainless steel 31L, material no Diaphragm: NR/una-N with PTFE coating, Inner valve: stainless steel 31L, material no optionally stainless steel G 1 8 to G1, max. 50 bar up to 130 / 2 F Dimensions owl Regulating system Flow onnection Order capacity D = diaphragm rate thread number mm mm mm l P = piston m 3 /h* 1 l/min* 1 G pressure regulator screw plug, relieving, w/o gauge, supply pressure 50 bar, 50 µm filter element, pressure range bar D 3 00 G G¼ D G¼ G D G½ G¾ P G¾ G µm filter element for G¼ (02) to G G NPT connection thread N bar pressure range bar pressure range D manual drain max. 30 bar H automatic drain max. 1 bar for G¼ (02) to G R non-relieving without relieving function K up to 130 / 2 F high temperature version X54 EPDM elastomer E FKM elastomer V SST diaphragm not for water for G¼ to G¾ S nitrogen N 2 : 07 ammonia NH 3 : 02 carbon dioxide O 2 : argon r: 05 helium He: 09 hydrogen H 2 : methane H 4 : 13 oxygen O 2 : 15 propane 3 H 8 : nitrous oxide N 2 O: flange connection see end of the chapter / flanges F. FD material SST diaphragm, EPDM o-rings for G¼ , , ccessories, enclosed pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 for G 1 8 and G 1 4 (2) MS * 2 Ø 50 mm, 0 * 2 bar, G¼ for G 1 4 to G 3 4 () MS * 2 Ø 3 mm, 0 * 2 bar, G¼ for G 3 4 and G1 MS302-..* 2 mounting bracket for G 1 8 and G 1 4 (2) W30-03S mounting nut M30x1,5S mounting bracket for G 1 4 (02) to G 3 8 W45-03S mounting nut M45x1,5S mounting bracket for G½ and G1 W50-01S mounting nut M50x1,5S G¼, G W30-03S * 1 at 8 bar supply pressure, 8 bar outlet pressure and 1 bar pressure drop W45-03S W50-01S * 2 04 = 0 4 bar, 10 = 0 10 bar, 1 = 0 1 bar hina website:
7 4000 Stainless Steel Regulator 4000 filter made of stainless steel throughout, is for high pressure use,corrosion and chemical resistance, good performance in chemically environments and outdoor facility. piston regulated, accurate and sensitive pressure setting,suitable for semi-conductor industry,large flow rate and effectively removes water and particle,4000-md midi filter regulator also has the feature of light weight, compact size for space saving. Supply pressure max. 0bar (4000-MD max. 30bar) compressed air or other gas(including corrosive and non-corrosive) Relieving function 4000-MD and /03/04 semi-auto drain,optionally manual drain, /08 manual drain as standard Temperature range G1/4(4000-MD G1/8)on both sides of the body,one screw plug supplied element 5μm,optionally 40μm,stainless steel 31 owl no window for stainless steel bowl,optionally with window for /08(only for low pressure,max15bar) Material body: stainless steel 31 Inner valve: stainless steel 31 owl: stainless steel 31 G 1 4 到 G1, max. 0 bar Dimensions Drain Flow owl apacity Operating onnection D rate pressure thread mm mm mm mm l/min ar G Order Number MIDI Regulator P1: max. 30 bar, P2: bar, semi-auto G MD P1: max. 0 bar Regulator semi-auto G¼ G G½ manual G¾ G MD 40 µm filter element G NPT threaded port N bar range only for / Manual drain H uto drain only for /03/ R owl with window only for / W D D /03/ MD D /03/ / / hina website:
8 ube Pressure Regulator 35 / 75 / 105 Modular cube filter pressure regulator. Threads of ports in body or in end plates. Integrated wall mounting system, no brackets necessary. Pressure adjustment by tamper-proof plastic knob. compressed air or non-corrosive gases Relieving function relieving Supply pressure max. 11 bar for plastic bowl, max. 17 bar for metal bowl with sight glass, max. 21 bar for metal bowl without sight glass G 1 8 at 35 and 75 or G¼ at 105, on both sides of the body, screw plugs supplied element 20 µm or 40 µm, optionally 5 µm or 20 µm, made of polypropylene owl plastic version with or without bowl guard, metal version with or without all-around sight glass Drainage manual drain as standard for max. 21 bar, optionally automatic or semiautomatic drain for max. 12 bar Temperature range 0 to 50 / 32 F to 122 F for plastic bowl or (semi-)automatic drain version 0 to 70 / 32 F to 158 F for metal bowl with sight glass 0 to 80 / 32 F to 17 F for metal bowl without sight glass for appropriately conditioned compressed air down to -30 / -22 F Material ody: zinc die-cast at 35 and 75, aluminium at 105 Spring cage: glass fibre-reinforced plastic owl: polyurethane or zinc die-cast Elastomer: NR/una-N Inner valve: brass G 1 8 up to G¾ Dimensions owl Flow Supply onnection Order Design apacity rate max. element thread number mm mm mm made of / with l m ³ /h* 1 l/min* 1 bar µm G ube filter regulator with manual drain, relieving, without gauge, Versorgungsdruck pressure max. 13 range bar bar 35/75/ plastic G H metal DH metal / sight glass WH plastic G¼ 35-02H metal DH metal / sight glass WH plastic G J plastic / bowl guard J metal DJ metal / sight glass WJ plastic G½ 75-04J plastic / bowl guard J metal DJ metal / sight glass WJ 8 22 plastic G½ J plastic / bowl guard J metal DJ metal / sight glass WJ plastic G¾ 105-0J plastic / bowl guard J metal DJ metal / sight glass WJ 75-03J 75-03J 75-03DJ 75-03WJ 5 µm filter element for G. 20 µm filter element EK100H for H. semiautomatic drain PKF35, piston drain, max. 12 bar for S RK500SY, spring-loaded, max. 12 bar all devices M automatic drain S05MD, max. 12 bar for R SF105MD, max. 12 bar for R ccessories, enclosed pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 for 35 M * 2 Ø 50 mm, 0 * 2 bar, G 1 8 for 75 M * 2 Ø 3 mm, 0 * 2 bar, G¼ for 105 M * 2 mounting bracket made of steel, mounting at the spring cage for 35 / 75 W30-02 for 105 W45-02 mounting nut made of plastic for 35 / 75 M30x1,5K for 105 M45x1,5K made of aluminium for 35 / 75 M30x1,5 for 105 M45x1,5 mounting bracket made of steel, side mounting for 35 W00-03 for 75 W00-04 for 105 W00-05 E Series D E Ø F ØF Ø D W W W W00-03 W00-04 W00-05 * 1 at 7 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar, 25 = 0 25 bar 35-01H hina website:
9 Maxi Pressure Regulator 20 / 21 High-capacity filter regulator of modular design with exchangeable inserts. an be interlocked with lubricator without needs for double nipples. Each maxi device may be taken from a fixed line in seconds by simply removing the mounting bolts. compressed air or non-corrosive gases Supply pressure max. 17 bar djustment by plastic knob with snap-lock at 20, by T-handle with locknut at 21 Relieving function relieving G¼ on both sides of the body, screw plugs supplied owl metal version with sight glass element 40 µm, optionally 5 µm, made of polypropylene Drainage manual drain as standard, optionally semiautomatic or automatic drain for max. 12 bar Temperature range 0 to 70 / 32 F to 158 F, up to 50 / 122 F for semiautomatic or automatic drain version Material ody: zinc die-cast Spring cage: zinc die-cast Knob (20): glass fibre-reinforced plastic T-handle (21): steel owl: zinc die-cast Sight glass: polyurethane Elastomer: NR/una-N Inner valve: brass and plastic G¼ up to G1 Dimensions owl Flow onnection Pressure Order Design apacity rate thread range number mm mm mm made of / with l m ³ /h* 1 l/min* 1 G bar Maxi filter regulator with manual drain, relieving, without gauge, Versorgungsdruck max µm bar filter element, max. 17 bar metal/sight glass G¼ WJ WJ WJD G WJ WJ WJD G½ WJ WJ WJD metal/sight glass G¾ WJ WJ WJD G1 0,2 4, WJ 0,3 9, WJ 0, WJD 20 with adjusting knob T-handle including locknut, total height 329 mm W.. filter element 5 µm WG. NPT connection thread W..N non-relieving without relieving function K semiautomatic drain RK500SY, max. 12 bar W..M automatic drain S05MD, max. 12 bar W..R ccessories, enclosed pressure gauge Ø 3 mm, 0 * 2 bar, G¼ M302-..* 2 mounting bracket mounting at the spring cage W45-02 mounting nut made of plastic M45x1,5K made of aluminium M45x1,5 mounting bracket set made of steel MK with T-handle Ø.5 gauge G¼ MK RK500SY S05MD W45-02 * 1 at 7 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar, 25 = 0 25 bar 20-02WJ hina website:
10 Pressure Regulator Series D, up to 30 bar D Good value zinc die-cast regulator of solid design and diaphragm operating system. Wall mounting through two drilled holes in the body. Suitable for compressed air or non-corrosive gases. Supply pressure max. 12 bar for plastic bowl, max. 1 bar for metal bowl with sight glass, max. 30 bar for metal bowl without sight glass djustment G 1 8 to G½: by plastic knob with snap-lock, G¾ to G1½ (D-1.): by handwheel, G1½ (D-12.) to G2: by T-handle with locknut G¼ or G 1 8 at D-01/02, on both sides of the body, one screw plug supplied element 20 µm and 50 µm, optionally 5 µm or 50 µm, made of propylene owl plastic version, standard or short, metal version with or without sight glass Drainage semiautomatic drain up to 1 bar, optionally manual (max. 30 bar) or automatic drain (max. 1 bar) Temperature range 0 to 50 / 32 F to 122 F for plastic bowl and semiautomatic or automatic drain version 0 to 70 / 32 F to 158 F for metal bowl with sight glass 0 to 80 / 32 F to 17 F for metal bowl without sight glass for appropriately conditioned compressed air down to -30 / -22 F Material ody: zinc die-cast at G 1 8 and G¼, Elastomer: NR/una-N aluminium at G 3 8 to G2 Inner valve: brass owl: polyurethane or zinc die-cast G 1 8 to G2 5/20/50 µm, up to 30 bar Dimensions owl Flow Supply onnection Order Design apacity rate max. element thread number mm mm mm made of / with l m ³ /h* 1 l/min* 1 bar µm G pressure regulator with semiautomatic drain, relieving, Versorgungsdruck max. 13 without bar pressure gauge, pressure range bar plastic G 1 8 D-01L plastic, short D-01K metal/sight glass D-01M metal D-01N plastic G¼ D-02L plastic, short D-02K metal/sight glass D-02M metal D-02N metal/sight glass G 3 8 D-03M metal D-03N metal/sight glass G½ D-04M metal D-04N metal/sight glass G¾ D-0M metal D-0N metal/sight glass G1 D-08M metal D-08N metal/sight glass G1¼ D-10M metal D-10N metal/sight glass G1½ D-1M metal D-1N metal/sight glass G1½ D-12M metal D-12N metal/sight glass G2 D-1M metal D-1N 5 µm filter element D-... G bar range D-... E operating pressure 30 bar only for metal bowl without sight glass, with manual drain D-..NH manual drain max. 1 bar for metal bowl with sight glass D-... H automatic drain max. 1 bar, drainage through float valve for G 3 8 to G2 D-... R ccessories, enclosed pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 for G 1 8 and G¼ M * 2 Ø 50 mm, 0 * 2 bar, G 1 4 for G 3 8 and G½ M * 2 Ø 3 mm, 0 * 2 bar, G¼ for G¾ to G2 M302-..* 2 mounting bracket made of steel for G 1 8 and G¼ W30-02 mounting nut made of plastic for G 1 8 and G¼ M30x1,5K mounting bracket made of steel for G 3 8 and G½ W50-03 mounting nut made of plastic for G 3 8 and G½ M50x1,5K mounting bracket made of steel for G¾ to G1½ (1.) W00-0 D D M ØE only G1½ inlet P P cross section outlet W50-03 * 1 at 8 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar, 1 = 0 1 bar Ø W Ø10 13 D type M D Ø E D-01/02 M30x1, D-03/04 M50x1, D-0 to -1 M50x1, W00-0 D-02L D-02M D-04M D-08M D-01L hina website:
11 Pressure Regulator down to -40 / -40 F 300 pressure regulator especially for low temperatures as well as supply of instruments. compressed air or non-corrosive gases Supply pressure max. 17 bar Supply sensitivity 10 mbar outlet pressure deviation at supply pressure variation of 1 bar djustment by square-headed spindle (spanner size 8 mm) with locknut Relieving function relieving, optionally non-relieving ¼ NPT on one side of the body, one screw plug supplied element 40 µm, optionally 5 µm, made of impregnated cellulose Drainage manual drain Temperature range 0 to 50 / 32 F to 122 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Spring cage: aluminium die-cast Elastomer: nylon-reinforced NR/una-N, optionally FKM Inner valve: brass, acetal, galvanised steel ¼ NPT Dimensions owl Flow Supply onnection Pressure Order design capacity rate max. thread range number mm mm mm made of l m ³ /h* 1 l/min* 1 bar NPT bar regulator with manual drain, relieving, without gauge, 40 µm filter element metal ¼ NPT µm filter element G non-relieving without relieving function K tapped exhaust ¼ NPT X12 tamper-proof cap T FKM elastomer V 300 ccessories, enclosed mounting bracket mounting at spring cage, made of steel W00-38 inlet outlet cross section 58 Ø W00-38 * 1 at 8 bar supply pressure, bar outlet pressure and 1 bar pressure drop O hina website:
12 Regulator Made of rass, up to 50 bar M pressure regulator made of solid brass, with bowl without sight glass. compressed air, non-corrosive gases or liquids Supply pressure max. 50 bar (without drain) Relieving function relieving, optionally non-relieving djustment by black plastic knob at sizes G 1 8 to G 3 8, by T-handle with locknut at G½ to G2 G¼ or G 1 8 at M-01 and M-2, on both sides of the body, one screw plug supplied element 50 µm, optionally 5 µm, made of stainless steel owl stainless steel version without sight glass Drainage screw plug as standard, optionally manual drain (max. 30 bar) or automatic drain (max. 1 bar) Temperature range 0 to 0 / 32 F to 140 F for NR/FKM or EPDM -40 bis 0 / -40 F to 140 F for low temp. version 0 to 130 / 32 F to 17 F for high temperature version for appropriately conditioned compressed air down to -20 / -4 F Material ody: brass owl: stainless steel 31L / material no Diaphragm: NR/una-N with PTFE coating, O-rings: NR/una-N, optionally EPDM or FKM Knob: plastic at sizes G 1 8 to G 3 8, brass at G½ to G2 Inner valve: brass and plastic (not at option X54) G 1 8 to G2, max. 50 bar -40 to 130 / -40 to 2 F Dimensions owl Regulating system Flow onnection Order Design apacity D = diaphragm rate thread number mm mm mm made of l P = piston m 3 /h* 1 l/min* 1 G rass filter regulator ccessories, enclosed with screw plug, relieving, without gauge, Versorgungsdruck supply max. pressure 13 bar max. 50 bar, 50 µm filter element, bar M stainless steel 0.04 D 3 00 G 1 8 M G¼ M stainless steel 0.17 D G¼ M G 3 8 M stainless steel 0.28 D G½ M G¾ M stainless steel 0.58 P G¾ M G1 M stainless steel 1.00 P G1½ M G2 M-1 5 µm filter element for G¼ (02) to G¾ () for G¾ (0) and G1 M-0. G for G1½ and G2 M-.. G NPT connection thread M-.. N bar range M bar range M-.. D manual drain max. 30 bar M-.. H automatic drain made of stainless steel, max. 1 bar for G¼ (02) to G2 M-.. R non-relieving without relieving function M-.. K down to -40 / -40 F low temperature version M-.. X51 up to 130 / 2 F high temperature version M-.. X54 EPDM elastomer M-.. E FKM elastomer M-.. V flange connection see chapter for stainless steel devices / flanges M-.. F. T-handle instead of adjusting knob for G 1 8 to G 3 8 M-.. T nitrogen N 2 : 07 carbon dioxide O 2 : 03 argon r: M helium He: 09 hydrogen H 2 : 11 methane H 4 : M oxygen O 2 : 15 propane 3 H : 1 nitrous oxide N 2 O: M pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 for G 1 8 and G¼ (2) M * 2 Ø 50 mm, 0 * 2 bar, G 1 4 for G¼ (02) to G¾ () M * 2 Ø 3 mm, 0 * 2 bar, G¼ for G¾ (0) to G2 M * 2 gauge for -40 to 130 Ø.. mm, 0 * 2 bar, G 1. M X54* 2 mounting bracket made of stainless steel for G 1 8 and G¼ (2) W30-03S mounting nut M30x1,5S mounting bracket made of stainless steel for G¼ (02) to G 3 8 W35-01S mounting nut M35x1,5S mounting bracket made of stainless steel for G½ to G1 W50-01S mounting nut M50x1,5S gauge G¼, G 1 8 at M-01/-2 M-03H, M-0H, M-..H W30-03S W35-01S W50-01S * 1 at 7 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar, 1 = 0 1 bar M-01 hina website:
13
14 TEL : chinawebsite:
Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationDescription Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
More informationVolume Booster. Volume Booster Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Volume ooster Supply pressure Pressure range onnection Device Page max. bar bar thread precise differential pressure also 17 0 1 / 10 and G 3 8 R50.02 differential pressure also 10 0.2 1 / 8 ¼ NPT 53.19
More informationPrecision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
More informationDescription Pressure range Connection thread Device Page bar
Pressure Regulator Pressure range onnection thread Device Page bar factory-set pressure artridge regulator 2 / 3 / 4 / 6 artridge 233.02 without exhaust 7 x 25 2 / 3 / /0 G¼ia R3.03 for liquids 34 x 52
More informationVolume Booster. Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Volume ooster Supply pressure Pressure range onnection Device Page max. bar bar thread precise differential pressure also 17 0 1 / 10 and G 3 8 R50.02 ratio 1:1 up to 1: 17 0 10 and G 3 8 R750.03 different
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
More informationCalibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New
> Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,
More informationOperating Manual. R280 Pressure regulator made of brass. 1. Intended Use
Pressure regulator made of brass Operating Manual 1. Intended Use Line or outlet pressure regulators- /reducer for Air, gases and liquids which is designed to effect reduction to a downstream pressure
More informationB74G - EXCELON Modular System General purpose filter/regulator
> Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory
More informationFilter pressure regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with pressure gauge suitable for ATEX
Filter regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with gauge suitable for ATEX 1 00119372 Version Parts Mounting orientation Working min./max. Medium Medium temperature
More informationIP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators
Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed
More informationBL68 - Olympian Plus, plug-in system Filter/regulators and lubricators
>> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
More informationINDUSTRIAL PNEUMATICS - air treatment units. FIL filter
Due to its metal construction, the entire range of NEW DEAL elements is resistant to heavy duty working conditions. Designed for high pressure application (up to 18 bar). FIL filter Degree of filtration:
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationPARTICULATE FILTER/REGULATOR
PRTICULTE FILTER/REGULTOR High flow with a wide range of adjustable output pressure ranges Optional low profile integrated gauge, Optional extended temperature range of -40 C to +80 C Threaded ports allow
More informationlternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0
ir line equipment P1H, PTH Filter/Regulator- Lubricator Combination Units 07 Series Compact design Filter removes liquids and solid particles down to 5 µm Push to lock adjusting knob with tamper resistant
More informationALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
More informationSeries K Air service units G 1/8, G 1/4
Air service units G /8, G /4 Series FK Filter, G /8 G /4.02 Series RK Pressure regulator, G /8 G /4.04 Series FRK Filter/regulator, G /8 G /4.06 Series OK Lubricator, G /8 G /4.08 Series FROK Two piece
More informationSeries MX pressure regulators 3/
CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges
More informationList of Contents VMA. System description 2. Individual Units Pre-Filters 3. Combinations 6. Accessories and Main spare parts 6
List of Contents VMA System description Individual Units Pre-Filters 3 Micro-Filters Activated-Charcoal-Filters 5 Combinations Accessories and Main spare parts Service Units G 1 / Pre-Filter Micro-Filter
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationPower Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationR133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid
R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder
More informationProportional Flow Valves
Chapter - Proportional Flow Valves Flow rate Connection thread Device Page portable meter, for many gases 2 100 ml / 450 l/min G¼, G½ VG.02 mass meter for gases 5 100 ml / 6000 l/min G¼ - G1 PVM.04 mass
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationPressure regulators for a wide range of applications
Pressure regulators Pressure regulators for a wide range of applications Pressure regulators are used to reduce a gas from a higher input pressure (p1) to a lower output pressure (p2). They are used everywhere
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
More information1200 Series Pressure Regulators
SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
More informationHow to Order. Rc NPT 1/8 1/4 3/8 1/2
AWM 3 AWD 3 Mist Separator Regulator AWM2 to AWM4 Micro Mist Separator Regulator AWD2 to AWD4 3 E 3 E How to Order Mist Separator Regulator 1 2 Micro Mist Separator Regulator The AWM series is made up
More informationCENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES
P0170E-1.DOCX/08.16/MG CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES With a Central Gas Supply System, individual work places or gas take-off stations are supplied with gas through
More informationCompact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ
Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More informationAir service units series K G1/8, G1/4
Air service units series K Series FK Filter 12.011 Series RK Pressure regulator 12.012 Series FRK Filter/regulator 12.013 Series OK Lubricator 12.014 Series FROK Two piece air service unit 12.015 Series
More informationCompressed Air Cleaning Filter Series
Compressed ir Cleaning Filter Series M /FF Series For Water Droplet, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! Uses the same spacer as the
More informationMINIATURE COMBINATION UNITS Filter/regulators and lubricators P1H - G1/8, G1/4
P1H INITURE COINTION UNITS ilter/regulators and lubricators P1H - 1/8, 1/4 Combinations of filterregulators and lubricators can be ordered as pre-assembled units Complete control of filtration, regulation
More informationNEWS 66. VALVES & AIR SERVICE UNITS STEEL LINE Series
NEWS 66 Components for Pneumatic Automation VALVES & AIR SERVICE UNITS STEEL LINE Series www.pneumaxspa.com Valves General The new Steel line valve series was created and developed specifically for the
More informationPremium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
More informationFILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2
FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel L Compact /, High Flow / - / Air service equipment Series FEATURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment
More informationRegulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2
Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).
More informationFR12MD FR38MD. Modular filter-regulators, suitable for compressed air FEATURES. Filter-regulator for inlet pressure up to 30 bar (435 psi).
FR12MD FR38MD Modular filter-regulators, suitable for compressed air FEATURES Filter-regulator for inlet pressure up to 30 bar (435 psi). Inlet and outlet connections 1/2 F and 3/8 F in the body. Outlet
More informationALE-32. Miniature General Purpose Regulators R07, R46 (non-repairable) Air line equipment. Technical data
ir line equipment Miniature eneral Purpose egulators 7, (non-repairable) 7 Full flow gauge ports Snap action knob locks pressure setting when pushed in Standard relieving models allow reduction of outlet
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More informationMounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
More informationPrecision Pressure Regulators. Precision Fluidics
Precision Pressure Regulators Precision Fluidics This is increased efficiency. Precision low flow carrier gas control for gas chromatography. Parker precision regulators, valves and controllers are designed
More information64 Series Pressure Reducing Regulators
Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,
More informationList of Contents vma. Compressed Air Conditioning 2. System description 2. Individual Units Pre-Filters 3. Combinations 6
Úprava stlačeného vzduchu EWO VMA List of Contents System description Individual Units Pre-Filters 3 Micro-Filters 4 Activated-Charcoal-Filters 5 Combinations 6 Accessories and Main spare parts 6 Service
More information4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,
More informationR300 HELYON. Brass high pressure regulator, for compressed air, gas and liquids
HELYON 5 Chemin du Jubin 69570 DARDILLY Tél. +33 (0)4 72 52 16 70 - Fax +33 (0)4 72 52 16 71 R300 Brass high pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator for inlet
More informationCI-SfB 732 (5-1) x. - laboratory fittings
CI-SfB 732 (5-1) x - laboratory fittings - ordering information Generally, item numbers for fittings have the following structure XL XX XXX 10 XX - XX X brownall Labtap Series no. Models 30 - Angle valves
More informationSeries SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100
Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
More informationEXCELON QUIKCLAMP SYSTEM Pressure relief valves V72G, V74G - G1/4... G 3/4
V7 V7 EXCELO QUIKCLMP SYSTEM Pressure relief valves V7, V7-1/... 3/ Excelon design allows in-line installation or modular installation with other Excelon products Push to lock adjusting knob with tamper
More informationPressure regulator for water
Pressure regulator for water rass version with VGW and international drinking water approvals Stainless steel version with VGW approval Compact plastic version Manometer port at pressure output The water
More informationSeries 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve
Series Self-operated Pressure Regulators Type -6 B Excess Pressure Valve Application Set points from 0.2 to 20 bar with valves G ½, G ¾, and G as well as DN, DN 2, DN 0, and DN 0 Nominal pressure PN 2
More informationPRO-50 Instrument Supply Regulator
Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits
More informationHigh Pressure Cylinder Valves
High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationF68G - Olympian Plus plug-in system General purpose filter
> > Port size: /... / (ISO G/ PTF) > > Olympian Plus plug in system > > Large filter element area provides minimum pressure drop > > Effective liquid removal and positive solid particle filtration Technical
More informationAtlas Copco Tools & Assembly Systems. Air Line Accessories Optimizers- FRL
Atlas Copco Tools & Assembly Systems Air Line Accessories Optimizers- FRL MIDI Optimizer FRL Why use an Atlas Copco FRL? Atlas Copco filters, regulators, and lubricators are designed to help you get maximum
More informationSelf-operated Pressure Regulators for special applications
Self-operated Pressure Regulators for special applications Type 2357-31 Pressure Build-up Regulator with safety function and integrated excess pressure valve Application Pressure regulators for cryogenic
More informationRelated Products: Auto Drain Valve. Model/Specifications. Model
Related Products: Auto Drain Valve /600 Drainage is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl
More informationModular F.R.L. Units. New. New. Series AC 46% Better visibility and environmental resistance. Energy saving regulator
Modular F.R.L. Units New RoHS etter visibility and environmental resistance Double layer design The bowl is covered with a transparent bowl guard! The inside is visible from 36. The bowl is completely
More informationAuto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
More informationParker Legris Machine Safety: Product Sheets
Parker Legris Machine Safety: s Blocking Fittings Blocking fittings include a pneumatic monostable 2/2 normally closed (N) function. These fittings are directly installed onto the pneumatic cylinder supply
More information61 Series Pilots for Pilot-Operated Pressure Reducing Regulators
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally
More informationMounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type
Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating
More informationISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4
Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual
More informationPilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
More informationKEYSTONE. A C E C O E n v i r o n m e n t a l C o m p a n y. Bulletin 10-B
KEYSTONE Filtration Solutions A C E C O E n v i r o n m e n t a l C o m p a n y Bulletin 10-B Standard Housings The 11N, 21N and 23N filter housings are tested and certified by NSF International under
More informationModel AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K
Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424
More informationModular Type Regulators
Modular Type Regulators Series AR AC Regulator Series AR Port size Options AFARAL, 1/4 Bracket AFAR AWAL AR4-A, 1/2 Round type pressure gauge With set nut (for panel mount) AFAFMAR P.45 to 5 AR4-6-A ot
More informationBROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM BROEN-LAB UNIFLEX TM FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM PREMIUM LAB
BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN-LAB-LAB UniFlex TM 4-5 Fittings for Non-burnig 2.0 Gases/Vacuum
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationPrecision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
More informationBooster Regulator/Air Tank
Booster Regulator/Air Tank Increase factory air pressure by up to 4 times! Air-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. NEW Renewed
More informationRR 16 Commercial & Industrial Regulator
Gas RR 16 Commercial & Industrial Regulator Applications The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations
More informationPressure Regulator B-95
Pressure Regulator B-95 TYPE B WATER & AIR TYPE B INTERIOR WATER & AIR B SERIES VALVES DESTRIPTION The Cash Valve Series B pressure reducing and regulating valves are single seated, spring loaded, direct
More informationDifferential pressure
Differential pressure 9 Overview Page 200 VEGADIF 65 Page 202 Chemical seal Page 204 Accessory Page 208 199 VEGADIF For differential pressure, level and flow measurements Measuring principle The sensor
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationAMG. Model Note) Rated flow (l/min (ANR)) Port size Mass (kg) 1 8, , 3 8. Specifications Fluid. Element life
Water Separator Series AMG Can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element
More information670 Series Panel-Mounted Loading Regulators
November 1992 Bulletin 62.3:670 670 Series Panel-Mounted Loading Regulators The Types 670, 6, 674, and 675 panel-mounted loading regulators (figures 1, 2, 3 and 6) are compact, rugged units used primarily
More informationR84G - Excelon Plus Modular System Pressure regulators
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Easy to read flush mounted integrated pressure gauge as
More informationBourdon tube pressure gauges for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres.! When measuring gas or vapour, the instruments must be
More informationTapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
More informationHP/UHP Spring-Loaded Regulator
Description HP (High Purity) and UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise dead areas where contaminants
More informationPneumatic retractable fitting for simple commercially available control units or process applications
Pneumatic Retractable Fittings hem Energy Pharm Food Water SensoGate W 3 Pneumatic retractable fitting for simple commercially available control units or process applications Variable and reasonably priced
More informationBourdon tube pressure gauges with glycerine filling, for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres. For measurement in areas subject to high vibration levels
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
5043250/2 IM-P504-18 CH Issue 2 IP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators Installation and Maintenance Instructions 1. Safety information 2. General product information
More informationJSRH Series. Sanitary Valves JSRH Series High Flow Pressure Reducing Valves. High Flow Bio-Pharma Clean Gas Pressure Reducing Valves
JSRH Series High Flow Bio-Pharma Clean Gas Pressure Reducing Valves The JSRH Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. It may also be
More informationTHE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
More informationAIR TREATMENT H Z E 0. Air Treatment Units CHARACTERISTICS CODIFICATION KEY. Filter. Ambient temperature Fluid Working pressure Max pressure Size Body
NEW - HZE Air Treatment Units CHARACTERISTICS Ambient temperature Working pressure Max pressure Body Knob Ring nut Bowl Bowl guard Filter element Seals Springs Diaphragm CODIFICATION KEY H Z E B 8 G +6
More information