NITROGEN GENERATOR Tradition Trail Plano, Texas 75093

Size: px

Start display at page:

Download "NITROGEN GENERATOR Tradition Trail Plano, Texas 75093"

Myles Elliott
5 years ago
Views:

1 NITROGEN GENERATOR Local: Fax: Tradition Trail Plano, Texas 75093

Applications Laser Cutting Laser cutting technology requires ultra-pure nitrogen to provide a clean and brilliant cut.

By rapidly removing the molten metal from the cutting zone, no smut or oxidized edges are created. This prevents potential problems for paint and powder coating, and improves welds.

Nitrogen is used to prevent oxidation that can affect the taste, as well as create a controlled atmosphere to keep food fresh.

By using clean nitrogen to reduce the oxygen content the food and beverage industry can prevent product deterioration which may occur due to oxidative rancidity, moisture, or microbial growth.

2 Applications Laser Cutting Laser cutting technology requires ultra-pure nitrogen to provide a clean and brilliant cut. Today s new fast-motion-systems, that use rapid acceleration and deceleration, need high pressure nitrogen to get the full value from your machine tool investment. By rapidly removing the molten metal from the cutting zone, no smut or oxidized edges are created. This prevents potential problems for paint and powder coating, and improves welds. Food and Beverage In today s global marketplace, consumers expect to receive maximum quality at minimum cost. Nitrogen is used to prevent oxidation that can affect the taste, as well as create a controlled atmosphere to keep food fresh.creating these modified atmospheres help maintain product freshness, quality and extend shelf-life. By using clean nitrogen to reduce the oxygen content the food and beverage industry can prevent product deterioration which may occur due to oxidative rancidity, moisture, or microbial growth. Oil Recovery Enhanced Oil Recovery (EOR), or tertiary recovery, involves extending the life of oil and gas reservoirs through a variety of fluid / chemical injections into existing reservoirs. Nitrogen injection is one of several fluids that can be used for EOR. Injection Molding The principle of this process is that nitrogen gas is injected, during the molding cycle, either through the spruce or directly into the mould tool. The controlled high pressure has the benefit of overcoming sink marks or introducing a cavity without the requirement of a core.

Industries: Aviation Energy Manufacturing Electronics Food and Beverage Oil and Gas Pharmaceuticals Metal Production Marine Electronics Manufacturing Automotive Chemical Features All-In-One unit, no

3 Industries: Aviation Energy Manufacturing Electronics Food and Beverage Oil and Gas Pharmaceuticals Metal Production Marine Electronics Manufacturing Automotive Chemical Features All-In-One unit, no buying a generator from one company and a booster pump from another and hoping they will work together. Our solution can provide you with nitrogen at pennies compared to bottles, or liquid nitrogen. You literally can get a Return on Investment in months. ISC s PSA nitrogen generators come pre-tested, fine tuned and inspected thoroughly to ensure that our generators are set up to meet the specific needs of our customers. Use either the clean, dry compressed air from your supply, or complete the package with one of our air compressors. Touch Screen LCD provides complete control of the unit, with multiple alarm, diagnostic, and monitoring settings.

Product Information Model Compressed Air Requirements Nitrogen output can be scaled: Boost pump: PSA-6000/PB-400 200 SCFM at 120 PSI required to produce 4,800 SCFH of Nitrogen 300 SCFM at 120 PSI

4 Product Information Model Compressed Air Requirements Nitrogen output can be scaled: Boost pump: PSA-6000/PB SCFM at 120 PSI required to produce 4,800 SCFH of Nitrogen 300 SCFM at 120 PSI required to produce 6,000 SCFH of Nitrogen 6000 SCFH of Nitrogen Outflow 4000 SCFH of Nitrogen Outflow or below 3000 SCFH of Nitrogen Outflow 20 hp, 480V, 3Ph with (1) 30 gallon 400psi pressure tank. Flow Capacity : 4, psi psi Filters: (1) Particulate Filter, (1) Oil Vapor Filter Storage Tanks: 240 gallon Compressed Air Storage Tank 240 gallon Nitrogen Storage Tank Controller LCD touch screen that provides complete control of the unit. It allows the user measure and change the nitrogen purity, flow, boost pump cycles, and alarms. *Air Supply must be free of water and oil. (Maximum inlet air pressure 145 psi) * Production Ratings are based upon 20 degree C Ambient Temperature.

5 System Operation: Our Nitrogen Generators arrive fully constructed, Plug-And-Play, with the clean, dry air from your compressor. Utilizing PSA technology and the best Carbon Molecular Sieve material in the world, we are able to produce clean nitrogen at high purity levels. These units use the latest technology in PLC controls, and creates nitrogen only when needed. It will provide an unlimited supply of nitrogen, and can run multiple lasers simultaneously. At the beginning of the pressure swing adsorption (PSA) process, treated compressed air enters the unit and flows through the carbon molecular sieve (CMS). This process separates the nitrogen from the other gases in the compressed air supply. Nitrogen molecules pass by the CMS, while Oxygen and the trace gases are adsorbed into the CMS. The active columns discharge Oxygen and trace gases, in the regenerative mode, while its twin column becomes activated and starts the process of separation.these nitrogen generators are the highest quality, and most cost effective high pressure PSA nitrogen generators on the market today.

Applied Compression s nitrogen generator packages offer users a cost-effective alternative to costly bottled nitrogen.

Applied Compression s nitrogen generator packages offer users a cost-effective alternative to costly bottled nitrogen. APPLICATIONS: Autoclaves Modified Packaging Atmospheres Coffee Packaging Oxidation Control Coil Tubing Units Pharmaceutical Manufacturing Electronic Parts Manufacturing Reflow Ovens Enhanced Oil Recovery