DTDDT, CYRTS? What makes a good sign particularly from a safety perspective? What leads people to heed or ignore the information /warning?
|
|
- Vincent Robinson
- 5 years ago
- Views:
Transcription
1 Do This, Don t Do That! Can t You Read the Sign? PRESENTED BY: RON WILKINS SENIOR ENVIRONMENTAL, HEALTH & SAFETY COMPLIANCE MANAGER RSR CORPORATION DALLAS TEXAS AHMP NATIONAL CONFERENCE SEPTEMBER 1, 2015 SCOTTSDALE, AZ DTDDT, CYRTS? What makes a good sign particularly from a safety perspective? What leads people to heed or ignore the information /warning? 01 Signs.m4a Got Me Thinking DTDDT, CYRTS? GHS training December 2012 Let s go way back What is the original warning sign? Ossuaries stacked skulls and bones in this manner since the Middle Ages Now universally recognized as a symbol of death/grave hazard Which is More Effective? If None of These Work - WARN 1
2 Safety as Advertisement Safety as Advertisement Safety signs - advertisements for safe behavior Must be tailored for effectiveness to each situation Sign designers should utilize a wide range of tools and designs to help prevent accidents Slogans Repetition Photos/Graphics Humor Taking into account the audience their training/experience urgency of the hazard Pretty clear what the hazard is. What is Advertising? What Makes an Effective Sign? advertising [...] makes you spend money you haven't got for things you don't want. Will Rogers as Hank Martin in A Connecticut Yankee (1931) Substitute the phrase time and effort for money Advertising Campaign Management (Ali Kanso UTSA) Conduct a Situation Analysis Identify Problems and Opportunities Establish Short and Long Term Objectives Determine Budget Develop Creative Strategy Create Message Select Appropriate Media Measure the Outcome Notice Salience, Proximity signal word to attract attention identification of the hazard, explanation of consequences if exposed to hazard, directives for avoiding the hazard. Communication Human Information Processing What Makes an Effective Sign? Visible Notice Brief Accurate Comprehensible 2
3 ?Question? One Solution If a hazard sign is posted, and no-one is there to read it, does it still get ignored? or, No Sign at All The Regulators Get Involved OSHA has specific marking requirements for physical hazards in 29 CFR : Red shall be the basic color used to mark: Fire protection equipment and apparatus Danger including safety cans or other portable containers of flammable liquids, excluding shipping containers. These shall be painted red with some additional clearly visible identification either in the form of a yellow band around the can or the name of the contents conspicuously stenciled or painted on the can (can should also be labeled in accordance with , Hazardous Communication /Global Harmonized System) Stop, emergency stop bars, hazardous machines, stop buttons and other electrical switches used for emergency stopping Yellow shall be the basic color for designating caution and for marking physical hazards, such as striking against, stumbling, falling and getting caught in-between ANSI Sign size - The wording on any safety sign should be concise and easy to read. The size of the lettering must be as large as possible for the intended viewing distance. Minimum letter height for the signal word (danger, caution, notice, etc.) shall be one unit of height for every 150 units of safe viewing distance. Minimum letter height for other words on the sign shall be one unit of height for every 300 units of safe viewing distance (ANSI Z ). The Regulators Get Involved ANSI standards for safety color coding are: Safety red identifies danger and stop. Safety orange identifies dangerous parts of machines or energized equipment. Safety yellow designates caution. Solid yellow, yellow and black stripes, or yellow and black checkers must be used for maximum contrast with the particular background. Safety green designates safety, emergency egress, and the location of first aid and safety equipment. Safety blue identifies safety information used on informational signs and bulletin boards. Safety purple is not yet assigned Safety gray is not yet assigned. Safety black, safety white, safety yellow or combinations of safety black with safety white or safety yellow are used to designate traffic or housekeeping markings. 3
4 Guess This Sign Designer Didn t Read ANSI International Standards Organization In event of fire, do not use elevator Refer to instruction manual Selfie Safety The Regulators Get Involved OSHA has three classifications of signs: Danger signs Indicate immediate danger and that special precautions are necessary. OSHA also specifies that the red, black and white colors used for Danger signs be in accordance with ANSI Z Caution signs Warn against potential hazards or caution against unsafe practices. OSHA specifies that the standard color for Caution signs shall have a yellow background black panel and yellow letters. All letters used against the yellow background shall be black. The colors must be in accordance with ANSI Z Safety instruction signs Used where there is a need for general instructions and suggestions relative to safety measures. OSHA specifies that the standard color for Safety Instruction signs shall be a white background, green panel and white letters. Any letters used on the white background shall be black. The colors must be in accordance with ANSI Z Notice Notice Do you see it? 4
5 Traffic Signs Huh?? TMI!!!!! Who would have thought? Viewer does a cost-benefit analysis cost of compliance, perception of danger level and personal and social and cultural decision-making factors. 5
6 All elements of the cost-benefit analysis are psychological. Perceived risk, perceived hazard, perceived control and perceived norms that matter, not actual ones. Familiarization Dilution Appearance (size, color, location) Specificity Risk taking High cost of compliance Underestimate danger Partial Compliance (Control Perception) I can control risk by behaving safely I know this process Social Factors No one else heeds the warning Culture Many of the people who design warnings are engineers - not so likely to consider mental models or psychological concepts. That's one reason that much of the warning research is so concerned with physical factors such as warning color, shape, wording and less with goals and motivation. Remember all the rules on signs from ANSI, OSHA, ISO? Conclusion Signs Your Going Nowhere There is much more to creating effective warnings than choosing the right color, size, location and font or even the right message. Understand what the viewer is trying to achieve and how the warning affects attainment t of his/her goal. The designer must consider the cost-benefit calculations that the viewer is likely to perform. Must consider the viewer's experience and knowledge and how s/he fits into the social world. 6
The Basics of Signage
2009 The Basics of Signage The nature of signage is, at the most basic level, designed to let these employees know the nature of the danger and what they need to do to avoid injury Rob Vajko 1/12/2009
More informationEffective Date: 26, October 2016 TITLE: COLOR CODING AND ACCIDENT PREVENTION SIGNS AND TAGS GUIDELINES
Version: 2 Page: 1 of 5 1.0 Introduction 1.1 Purpose The purpose of this guideline is to communicate information and to establish a method for marking physical hazards. 1.2 Scope This guideline is intended
More informationWays to Meet OSHA Requirements for Safety Signage
Safety Sign Training Ways to Meet OSHA Requirements for Safety Signage References: 29 CFR 1910.145 and ANSI Z535 Standard This material was developed by MCLBA, Risk Management. It does not necessarily
More informationSAFETY DIRECTIVE. 2.0 DEPARTMENTS AFFECTED This directive applies to all departments and employees of the Town of Marana.
SAFETY DIRECTIVE Title: Safety Signs and Accident Prevention Tags Issuing Department: Town Manager s Safety Office Effective Date: September 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action:
More informationAccident Prevention Signs and Tags Safety Training Course
Accident Prevention Signs and Tags Safety Training Course Copyright protected. All rights reserved. ATTENTION! This PowerPoint training presentation provides safety education and information to our employees
More informationSafety Sign Assessment for Frequently Endangered Employees
SAFE Safety Sign Assessment for Frequently Endangered Employees Guidelines: This checklist covers the regulations issued by the U.S. Department of Labor - OSHA under the General Industry standards 29 CFR
More informationHAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING. Leader s Guide. ERI Safety Videos
2876 HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING Leader s Guide ERI Safety Videos HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING This easy-to-use Leader
More informationAccident Prevention Signs and Tags
Accident Prevention Signs and Tags 1910.145 Specifications for accident prevention signs and tags. (a) Scope. (1) These specifications apply to the design, application, and use of signs or symbols (as
More informationThere is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.
OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There
More informationTOP 5 ITEMS TO CONSIDER WHEN CHOOSING SAFETY SIGNS
TOP 5 ITEMS TO CONSIDER WHEN CHOOSING SAFETY SIGNS By: Thomas Smith, Product Manager, Brady Worldwide Inc. Last updated: January, 2012 Safety signs are a necessary component for warning and communicating
More informationOriginal Date of Issue: 04/09
POLICIES AND PROCEDURES DEPARTMENT: Environmental Health and Safety SUBJECT: Electrical Safety Program Original Date of Issue: 04/09 Reviewed 12/2011 Revised 12/2011 BACKGROUND ELECTRIC SHOCK It is well
More informationCarter Healthcare, Inc
Training Requirements for the Revised Hazard Communication Standard December 1st, 2013 Questions and Answers Q. What is the Globally Harmonized System? A. The Globally Harmonized System (GHS) is an international
More informationDoc #: 1000-AD Revision: - GLOBALLY HARMONIZED SYSTEM (GHS) SOP. Author(s): T. Lavoie/ M. Saucedo/ J. Dunlop/ Supervisor
Doc #: 1000-AD-015-0028 Revision: - GLOBALLY HARMONIZED SYSTEM (GHS) SOP Author(s): T. Lavoie/ M. Saucedo/ J. Dunlop/ Supervisor TABLE OF CONTENTS REVISION HISTORY... 3 1.0 INTRODUCTION... 4 2.0 PROGRAM
More informationAccidents and accident prevention
Accidents and accident prevention What is an accident? 1. Oxford Dictionary An unforeseeable event often resulting in injury. 2. British Safety Council A management error; the result of errors or omissions
More informationArmy Guidelines for Safety Color Codes, Signs, Tags, and Markings
Department of the Army Pamphlet 385 11 Safety Army Guidelines for Safety Color Codes, Signs, Tags, and Markings Headquarters Department of the Army Washington, DC 25 June 2013 UNCLASSIFIED SUMMARY DA PAM
More informationHazard Communication 29 CFR
Hazard Communication 29 CFR 1910.1200 Effective March 1, 2014 Subpart Z - Toxic & Hazardous Substances (1910.1000-1450) Hazard Communication - Written program 1200(e)(1) Hazard Communication - Information
More informationAmerican National Standard
Illustrative draft. ANSI Z535.X-2016 Revision of ANSI Z535.2-2011 and ANSI Z535.4-2011 Table of contents, section and figure numbering within document, many figures, Foreword have not been consolidated/updated.
More informationEscondido Union High School District. Hazard Communication Plan
Escondido Union High School District Hazard Communication Plan Updated June 2017 Table of Contents Introduction. 2 Globally Harmonized System (GHS). 2 Hazardous Substance Inventory. 3 Safety Data Sheets
More informationUniversity of Vermont Department of Physical Plant Burlington, Vermont
University of Vermont Department of Physical Plant Burlington, Vermont CONTROL OF HAZARDOUS ENERGY SOURCES AND ELECTRICAL HAZARDS LOCKOUT AND TAGOUT PROGRAM in accordance with OSHA 29 CFR 1910.147 REVISED
More informatione-compliance Training
e-compliance Training A Hazard Communication - October 2018 In 2012, OSHA modified the Hazard Communication Standard significantly. This was done to adopt the internationally used Globally Harmonized System
More informationCONTROL OF HAZARDOUS ENERGY IN THE WORKPLACE
Office of Environmental Health & Safety CONTROL OF HAZARDOUS ENERGY IN THE WORKPLACE LOCK OUT/TAG OUT OSHA 29 CFR 1910.147 rev. 3 2014 Director of Environmental Health & Safety Control of Hazardous Energy
More informationHazard Communication Safety Data Sheets
Hazard Communication Safety Data Sheets OSHA revised its Hazard Communication Standard (HCS) to align with the United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS).
More informationARKANSAS TECH UNIVERSITY FACILITIES MANAGEMENT HEALTH AND SAFETY MANUAL (LOCKOUT/TAGOUT) 30.0
() 30.0 The purpose of the Energy Control Policy (Lockout/Tagout) is to ensure that before any employee performs any servicing and/or maintenance on machinery or equipment, where the unexpected energizing,
More informationHazard Communication Program
Hazard Communication Program I. Purpose, Applicability, and Scope A. Purpose: The purpose of this program is to ensure that the hazards of chemicals used in the workplace are evaluated, and those hazards
More informationISD #535 Rochester Public Schools
ISD #535 Rochester Public Schools Health & Safety Office Maintenance Service Building 10 9½ St SE Rochester, MN 55904 507-328-4507 Management Plan for Machine Guarding Modification Date Document Modification
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD. Cranes - Safety signs and hazard pictorials - General principles
INTERNATIONAL STANDARD ISO 13200 First edition 1995-12-15 Cranes - Safety signs and hazard pictorials - General principles Appareils de levage a Charge suspendue - - Principes g>-aux Signaux de s&uritg
More informationUsing Personal Safety in Agricultural Mechanics
Lesson A1 3 Using Personal Safety in Agricultural Mechanics Unit A. Mechanical Systems and Technology Problem Area 1. Introduction to Agricultural Mechanics and Technology Systems Lesson 3. Using Personal
More information2. The purpose of this program is to achieve the following objectives:
Section 16A. Lockout and Tagout Program 1. In the course of their duties, personnel at the TFREC may need to secure controls, switches, and equipment in order to prevent injury caused by the sudden, unexpected
More informationWHMIS 2015 HARMONIZATION OR HEADACHE? PRESENTED BY. ICC 2016 STLE WHMIS 2015 Presentation Page 1
WHMIS 2015 HARMONIZATION OR HEADACHE? PRESENTED BY ICC 2016 STLE WHMIS 2015 Presentation Page 1 Growth of Right to Know EU Seveso Directive 1982 OSHA Hazcom Standard (OSHA 1910.1200) 1985 Canada s WHMIS
More informationLOCKOUT / TAGOUT PROGRAM
LOCKOUT / TAGOUT PROGRAM Developed in accordance with the OSHA Control of Hazardous Energy Standard, 29 CFR 1910.147 DECEMBER 7, 2017 SKIDMORE COLLEGE 815 NORTH BROADWAY, SARATOGA SPRINGS, NY 12866 Table
More informationDepartment of Electrical Engineering & Computer Science. Electrical Safety. for Staff and Students in EECS Instructional Laboratories
NEVER WORK ALONE Department of Electrical Engineering & Computer Science Electrical Safety for Staff and Students in EECS Instructional Laboratories If you will be working with energized circuits or equipment
More informationAccident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments
Accidents Causes and Prevention Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments Anatomy of an Accident Asbestos Awareness Asbestos Awareness
More informationTHE UNIVERSITY OF NORTH CAROLINA
THE UNIVERSITY OF NORTH CAROLINA AT CHAPEL HILL CHILLED WATER DEPARTMENT ENERGY CONTROL PROCEDURE The purpose of this document is to establish minimum requirements for the manual isolation and securing
More informationOmega Safety Training, Inc Hwy 6 North, Ste. 207 Houston, Texas Ph:
Omega Safety Training, Inc. 4654 Hwy 6 North, Ste. 207 Houston, Texas 77084 Ph: 281-979-4849 Email: Chad@omegasafetytraining.com Training Syllabus: P.E.C. 24 Hour Core Compliance SafeLand USA & SafeGulf
More informationELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR CFR , ,
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.331 335-29 CFR 1926.302, 1926.416, 1926.417 BASIS: The National Safety Council estimates that there are at least 300 deaths
More informationPresented by John Whale Control Banding as a Potential Alternative to Risk Assessment
Presented by John Whale Control Banding as a Potential Alternative to Risk Assessment AUSA National Conference Sydney 2009 Background Monash s current risk control program has been in place for over 6
More informationLockout / Tagout Program OSHA 29 CFR
Lockout / Tagout Program OSHA 29 CFR 1910.147 Baylor University utilizes outside contractors to perform set-up, maintenance, service, and repair to equipment utilized on campus. University staff perform
More informationEnergy Control. Suite 2A, 55 Frid Street Hamilton, ON L8P 4M3 office: cell:
Energy Control Suite 2A, 55 Frid Street Hamilton, ON L8P 4M3 office: 905.577.0303 cell: 905.977.0210 consultant@staffaid.ca www.staffaid.com Safety, Energy Control, Power Lockout & Function Test Procedures
More informationFLAMMABLE & COMBUSTIBLE LIQUIDS PROGRAM
FLAMMABLE & COMBUSTIBLE LIQUIDS PROGRAM 1.0 PURPOSE This program applies to employees, visitors and contractors (persons) for the purpose of articulating safe work practices when working with and around
More information3124 It Only Takes a Second Discussion Version
3124 It Only Takes a Second Discussion Version Leader s Guide 2000, Aurora Pictures Inc. 1 Format of the Video This discussion version of It Only Takes A Second consists of a series of safety mishaps,
More informationHAZARD COMMUNICATION PROGRAM (GHS) (Global Harmonizing System)
HAZARD COMMUNICATION PROGRAM (GHS) (Global Harmonizing System) Company Name: Gryphon Roofing & Remodeling. The purpose of this program is to ensure that potential hazards and hazard control measures for
More informationHazard Communications. Your Right to Know
Hazard Communications Your Right to Know Hazard Communication Standard (HCS) 29 CFR (Code of Federal Regulations) 1910.1200 Hazard Communication The purpose of this is to ensure that the hazards of all
More informationHealth, Safety, Security and Environment
Document owner and change code Document Owner Aaron Perronne Title HSSE Manager Mark X Change Code Description X N/A First Issue A Typographical/Grammatical correction; formatting change; text clarification-no
More informationLOCKOUT/TAGOUT PLAN August 2015
LOCKOUT/TAGOUT PLAN August 2015 Office of Environmental Health and Safety 423-354-5224 TABLE OF CONTENTS Purpose and Intended Use... 2 A. Types of Energy Sources... 2 B. Activities Requiring Lockout/Tagout
More informationLockout/Tagout Safety Policy
University of North Carolina Wilmington Environmental Health & Safety Workplace Safety Lockout/Tagout Safety Policy GENERAL The UNCW Environmental Health & Safety Department (EH&S) is authorized by UNCW
More informationGlobally Harmonized System of Classification and Labeling of Chemicals (GHS)
Globally Harmonized System of Classification and Labeling of Chemicals (GHS) New OSHA Requirements presented by: Safety Committee of the Houston Chapter, Associated General Contractors of America August
More informationLockout/Tagout - Energy Control Program
Lockout/Tagout - Energy Control Program Lockout and Tagging of ELECTRICAL Circuits This portion of the K.R. Miller Contractors, Inc. safety program has been created to maintain a written copy of procedures
More informationJOB HAZARD CHECKLIST
JOB HAZARD CHECKLIST Safe working conditions continue to rank in OSHA s Top 10 violations for manufacturing. Taking a proactive step to evaluate your current work environment will begin the process of
More informationSAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED. This Administrative Directive shall apply to all Town of Marana departments and employees.
SAFETY DIRECTIVE Title: Control of Hazardous Energy Lock-out/Tag-out/Try-out Issuing Department: Town Manager s Safety Office Effective Date: July 1, 2014 Approved: Gilbert Davidson, Town Manager Type
More informationWEBINARS. Hazard Communication
WEBINARS Hazard Communication Teaches employees the safe use and handling of hazardous chemicals in the workplace and how to protect themselves and others from those hazards. The modified standard provides
More informationService Instructions. Syntron Jogger Model: Mini-CheckMate TM
Service Instructions Syntron Jogger Model: Mini-CheckMate TM Service Manual Syntron Jogger Model: Mini-CheckMate TM 1 Table of Contents Page Safety Instructions 3 Introduction 4 Installation 4 Operation
More informationPURPOSE OF THE POLICY
Title: Safe Storage, Handling, Use and Disposal Procedures of Compressed Gas Cylinders Effective Date: November 2005 Revision Date: March 1, 2017 Issuing Authority: Responsible Officer: VP, Capital Projects
More informationLock Out - Tag Out Safety Program
Lock Out - Tag Out Safety Program Daniel Schmid 4-22-15 Pam Schmid 4-22-15 Dan Schmid Pam Schmid Safety Director Quality Director Table of Contents DOCUMENT REVISION TABLE... 3 PURPOSE... 4 RESPONSIBILITY...
More informationEquipment and Shop Safety. Safety Unit
Equipment and Shop Safety Safety Unit 2 General Safety Rules 1. Listen to or read instructions carefully before attempting to doanything. 2. Wear safety goggles to protect your eyes from chemicals, heated
More informationDEPARTMENT OF THEATRE AND DANCE CALIFORNIA STATE UNIVERSITY, FULLERTON
DEPARTMENT OF THEATRE AND DANCE CALIFORNIA STATE UNIVERSITY, FULLERTON SCENIC LAB SAFETY PROCEDURES (CPAC 154) 1. POLICY The Department Scenic Lab is a facility, which supports courses in scenic design
More informationManaging for Liability Avoidance. (c) Lewis Bass
Managing for Liability Avoidance (c) Lewis Bass 2005 1 Staying Safe in an Automated World Keys to Automation Safety and Liability Avoidance Presented by: Lewis Bass, P.E. Mechanical, Industrial and Safety
More informationAn atc-induced runway incursion
An atc-induced runway incursion Editorial note: This situational example is not a real occurrence and neither is it intended to be a full description. It has been created to allow a focus on operational
More informationNew OSHA Sweep Auger Enforcement Policy. Presented by: Jim Nolte - Safety Director Wisconsin Agri-Business Association
New OSHA Sweep Auger Enforcement Policy Presented by: Jim Nolte - Safety Director Wisconsin Agri-Business Association Background In 2008 OSHA was asked if an unguarded sweep auger could be operated (energized)
More informationWilliamsport Community Woodshop
Center for Creativity Williamsport Community Woodshop Work Rules The following rules are designed for your safety and the safety of other s. Non-compliance to these rules may result in your expulsion from
More informationSPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
More informationHAZARD COMMUNICATION STANDARD (HCS) GLOBALLY HARMONIZED SYSTEM (GHS)
HAZARD COMMUNICATION STANDARD (HCS) GLOBALLY HARMONIZED SYSTEM (GHS) OR-OSHA Standard 29 CFR 1910.1200 Table of Contents Purpose... 2 Accountability... 2 Container Labeling... 2 Safety Data Sheets... 3
More informationRevised Hazard Communication Standard (GHS) Triumvirate Environmental
Revised Hazard Communication Standard (GHS) Triumvirate Environmental Why is GHS Needed? No country has the ability to identify and specifically regulate every hazardous chemical product For example, in
More informationConsider This. 4.67x6.58 0x1.21 HEALTH & SAFETY NEWSLETTER MAY Chrome Plating Process. Captain Obvious. Preventing Back Injuries
4.67x6.58 0x1.21 Consider This MAY 2015 Coaching: Developing Safe Work Habits & a Positive Attitude Visual Communication Safety Labels for Machines & Equipment Preventing Back Injuries Chrome Plating Process
More informationHandout Activity: HA107
Engines: Motive Power Types: Handout Activity: HA107 Student/Intern information: Name Date Class Identifying hazards Summary A workshop is a hazardous environment. The objective of this procedure is to
More informationGolf. By Matthew Cooke. Game Like Training
Game Like Training for Golf By Matthew Cooke Game Like Training @gltgolf @gltraininggolf Introduction In this quick start guide we dive a little deeper into what it means to train in a Game Like way. Game
More informationMaurer Manufacturing th Ave. West P.O. Box 160 Spencer, IA PH: (712) FAX: (712)
02-22-12 8E000002,Rev. AD Combine Grain Tank Extension Tip-Up Kit JOHN DEERE STS SERIES & S-SERIES OPERATORS / ASSEMBLY MANUAL FITS: ALL 50, 60, & 70 SERIES STS COMBINES & MAURER 9E000032 S-SERIES BIN
More informationINSTRUCTIONS FOR USE
Rebar Chain Assembly INSTRUCTIONS FOR USE 7260XX Rebar Chain Assembly Complies with the current ANSI Z359.1-2007 and all applicable OSHA regulations and requirements. Reliance Industries P.O. Box 2046
More informationRULES OF PLAY FOR BRSL GAMES SECTION 11.1
RULES OF PLAY FOR BRSL GAMES SECTION 11.1 RULES OF PLAY FOR BRSL GAMES Play in the Blue Ridge Soccer League (BRSL) will be in accordance with FIFA Laws of the Game and the Universal Guide for Referees
More informationAnnex 1 to Decision 2009/007/R
Annex 1 to Decision 2009/007/R AMC to Part 145 A new AMC 145.A.45(e) is added: AMC 145.A.45(e) Maintenance data The maintenance organisation should transcribe accurately the maintenance data onto such
More informationWESTERN CONNECTICUT STATE UNIVERSITY LOCKOUT/TAGOUT PROCEDURE S-107
WESTERN CONNECTICUT STATE UNIVERSITY LOCKOUT/TAGOUT PROCEDURE S-107 Draft Issued 12/97 Revised 11/00 Please direct any questions or comments about the applicability of this document to Luigi Marcone, WCSU
More informationGettysburg College. Energy Control Program
Gettysburg College Energy Control Program Adopted October 2009 Reviewed and Updated February 2015 Reviewed and Updated July 2015 I. Energy Control Procedures Table of Contents A. General Lockout Procedures
More informationNPGA White Paper. OSHA Hazard Communication Standard
I. INTRODUCTION NPGA White Paper OSHA Hazard Communication Standard The purpose of this white paper is to describe the changes to the Occupational Safety and Health Administration (OSHA) Hazard Communication
More informationIntended Audience. Graphic Justifications
John Fuller BSU ED TECH 506 4/29/2012 Intended Audience The following unit of instruction is intended for Roseville High School students enrolled in CP Earth Science. Classes consist mainly of 9 th and
More information2008. AURORA PICTURES
2923 LOCKOUT/TAGOUT: It Would Have Saved His Life 2008. AURORA PICTURES 1 Table of Contents Introduction 3 Video Overview.3 Introduction 3 Purpose of Lockout/Tagout 3 Hazardous Energy Sources.3 Authorized
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 14456 First edition 2015-09-15 Gas cylinders Gas properties and associated classification (FTSC) codes Bouteilles à gaz Propriétés des gaz et codes de classification associés
More informationElectrical Safety Work Practices
Work Practices I. SCOPE This program covers any SOUTHWESTERN COMMUNITY COLLEGE employee that may work or be exposed to exposed electrical systems: To assure that employees are not exposed to potentially
More informationEffective Workplace Inspections
Effective Workplace Inspections Why are workplace inspections important? 3600-Safety Inspections-General Information Workplace inspections help prevent injuries and illnesses. Through critical examination
More informationDeveloping a Safer Cycling Strategy for the ACT ACRS Conference August 2012
Developing a Safer Cycling Strategy for the ACT ACRS Conference 2012 Peter Strang Canberra Manager Sarah Court Transport Consultant 10 August 2012 Presentation Outline Background Data Analysis (Stage 1)
More informationLaboratory Safety Coordinator Meeting
Laboratory Safety Coordinator Meeting SUMMER 2013 News and Updates Welcome! Welcome New LSCs! Joseph Barbercheck- Associate Director Research Safety Andrea Voehringer Research Safety Specialist Good Byes!
More informationSAFETY AND OSHA GUIDELINE CURRICULUM
SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will
More informationA MESSAGE FROM THE MD
A MESSAGE FROM THE MD The Life Saving Rules set out clear and simple dos and don ts covering activities with the highest potential safety risk and apply to all employees and contractors. The best-performing
More informationElements of a Lockout/Tagout Program OSHA
September 15, 2015 Elements of a Lockout/Tagout Program OSHA 1910.147 Dayna Noble Industrial Safety Consultant Specialist Ohio BWC 567-204-8917 Dayna.noble@bwc.state.oh.us Top 10 most frequently cited
More informationProcess Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR
Process Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR 1910.119 PSM - Definition Not all refining hazards are caused by the same factors or involve ve the same degree of potential damage.
More informationLaboratory Self Inspection Checklist LAB01
Laboratory Self Inspection Checklist LAB01 General Chemical/Biological Laboratories Location Assessor Date This core checklist is provided by the Health and Safety Department as a template, which provides
More informationUnited States and World Breaking Associations- Competition Rules , USBA/WBA all rights reserved
United States and World Breaking Associations- Competition Rules 2005-2017, USBA/WBA all rights reserved General Judging and Scoring Method: 1. Scoring point range varies by division. 2. 3-7Judge system
More informationLockout Tagout Policy
Office of Environmental Health & Safety www.moreheadstate.edu/ehs 606-783-2584 Lockout Tagout Policy PURPOSE To establish procedures for the de-energization and isolation of energy sources or the lockout
More informationELECTRIC OPERATING PROCEDURES Date: 11/01/06
Doc No.: NG-USA EOP D001 Page: 1 of 5 ELECTRIC OPERATING PROCEDURES SUBJECT: Cutouts Open/Enclosed Type SECTION: Distribution/Overhead REFERENCE: National Grid Retail Company Safety Manuals National Grid
More informationLOCKOUT-TAGOUT PROGRAM
LOCKOUT-TAGOUT PROGRAM Please Note: This material, or any other material used to inform employers/employees of compliance requirements of OSHA standards through simplification of the regulations should
More informationUniversity of Tennessee Safety Program
University of Tennessee Safety Program Policy Subject: Lockout/Tagout Program Effective Date: 4/22/98 Area Affected: All areas on campus where equipment can be locked out for service. Contact Information:
More informationH. Control of Hazardous Energy: Lockout/Tag Out
H. Control of Hazardous Energy: Lockout/Tag Out 1. Purpose Control of Hazardous energy is the purpose of the Lockout- Tagout Program. This program establishes the requirements for isolation of both kinetic
More informationOSHA Updates for the Aviation Maintenance Technician. Bob Gould Bravo Golf Aviation
OSHA Updates for the Aviation Maintenance Technician Bob Gould Bravo Golf Aviation Bob Gould Who Am I? dba Bravo Golf Aviation 47 years in aviation and aircraft maintenance Retired from US Navy and industry
More informationGlobally Harmonized System Hazard Communication
1 IEC NATIONAL Globally Harmonized System Hazard Communication Presented for National Electrical Safety Month 2 Presentation Goals Understand the new Globally Harmonized System Hazard (GHS) regulations
More informationChemicals, ranging from water to acid, can be found just about everywhere. Some chemicals are more harmful than others. You must be aware of chemical hazards at all times, especially at work. At work,
More informationOKLAHOMA CITY COMMUNITY COLLEGE CONTROL OF HAZARDOUS ENERGY PROGRAM. Environmental Health and Safety. Established:
OKLAHOMA CITY COMMUNITY COLLEGE CONTROL OF HAZARDOUS ENERGY PROGRAM Environmental Health and Safety Established: Developed in accordance with OSHA Standard 29 CFR 1910.147 1 1.0 SCOPE. Oklahoma City Community
More informationGeneral Safety and Health Provisions for Construction Self Inspection Checklist
Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: General Safety and Health Provisions for Construction Self Inspection Checklist Instructions:
More informationSafety & Health Division. INVESTIGATION INTO THE FATAL ACCIDENT TO JOHN ANTHONY MAHER AT COOK COLLIERY ON 30th AUGUST 2000
INVESTIGATION INTO THE FATAL ACCIDENT TO JOHN ANTHONY MAHER AT COOK COLLIERY ON 30th AUGUST 2000 1 ACCIDENT SUMMARY Prior to the accident the continuous miner was immobilised in a sump when the left rib
More informationGlobal EHS Powered Industrial Truck and Pedestrian Safety
Global EHS Powered Industrial Truck and Pedestrian Safety Control No: Policy Name: Powered Industrial Truck and Pedestrian Safety Policy Responsible Corporate Function/Business Segment: Global Environmental
More informationPLANT HAZARD REPORT. Plant Description: Element Aspect Plant Hazards and Controls Advice. Circular Saw
PLANT HAZARD REPORT Plant Description: Circular Saw PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser
More informationIn This Document. OBJECTIVES Upon completion of this module, you should be able to:
Struck By Fact Sheet MODULE DESCRIPTION This module provides information that will enable you to recognize common struck-by hazards at construction worksites. OBJECTIVES Upon completion of this module,
More informationHAZCOM 2012 RIGHT-TO-UNDERSTAND. Helping you comply with 29 CFR
HAZCOM 2012 RIGHT-TO-UNDERSTAND Helping you comply with 29 CFR 1910.1200 INTRODUCTION REVISED HAZARD COMMUNICATION STANDARD 29 CFR 1910.1200 First major technical revision in 29 years HazCom is more than
More information