SAFETY AND OSHA GUIDELINE CURRICULUM
|
|
- Darren Barnett
- 5 years ago
- Views:
Transcription
1 SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will learn to contribute to the critical job of Safety using basic safety procedures and policies. You will understand how the cost of accidents can affect everyone and how, by applying basic safety guidelines from OSHA, the Occupational Safety and Health Administration, you can identify hazards and prevent accidents. Accidents Safety programs are designed to help you prevent accidents, but occasionally accidents do occur. In this course you will learn what you should, and should not do, when an accident occurs, when and how to get help, how to interact with the people involved in an accident and how to protect yourself and others. Fire Safety Fire is the most potentially dangerous hazard you can face and represents the greatest potential long-term damage to our company. In this course you will learn about Fire Safety procedures, and OSHA, guidelines. You will learn about the different types of fires, fire prevention, and how and when to use fire extinguishers. Lockout/Tagout In this course you will learn about what Lockout/Tagout is and how it applies to you. This program is designed to meet the specific requirements established by the Occupational Safety and Health Administration, OSHA. The OSHA Lockout/Tagout standard has been established to prevent accidents and injuries to employees during servicing and maintenance of equipment. Hazardous Communications In this course you will learn about Your Right to Know regarding any potentially hazardous chemicals. You will learn about MSDS or Material Safety Data Sheets and how to read and understand them. Labels on the products you may use will also contain important information, which you will need to understand. Powered Lift Truck Essentials In this course you will learn about Powered Pallet Jacks and other powered lift trucks; their safety regulations and general operating essentials. The completion of this program is often a requisite addition to the required hands on driver training. Safety Courses from Asbestos Hazard Awareness The goal of this lesson is to improve the health and safety of employees by providing required training regarding the awareness of asbestos hazards. Basic First Aid Each learner will learn how to initially respond to an injury. They will understand first aid guidelines and good practices, and be able to respond to emergencies. They will also learn what not to do without the proper training. Bloodborne Pathogens The goal of this course is to help employers provide a safe and healthful work environment for their employees and minimize the possibility of employee exposure to bloodborne pathogens.
2 Chemical Safety The goal of this lesson is to provide required awareness training in the occupational hazards common to the handling and use of chemicals, methods and techniques used for evaluating and minimizing chemical exposure, measures employees can take to protect themselves from chemical hazards, safe practices for chemical storage and waste disposal, and the correct response to emergency situations involving chemical spills. Chlorine Safety The goal of this lesson is to provide awareness training to help workers recognize the occupational hazards and health effects of chlorine exposure and the exposure controls. Confined Spaces - Entry Level The goal of this lesson is to make employees aware of the hazards that exist in a permit-required confined space and recognize that special precautions, training, and an approved Confined Space Entry Permit or approved Routine Entry Procedures are required for entry. Confined Spaces The goal of this lesson is to make all employees aware of the potential hazards that may exist in a confined space and understand that special precautions, training, and an approved Confined Space Entry Permit or approved Routine Entry Procedures are required for entry. Cardio Pulmonary Resuscitation (CPR ) The goal of this lesson is to provide lay rescuers with refresher training or supplement training from a practical hands-on CPR course on how to respond confidently to a respiratory, cardiac or choking emergency until professional medical help arrives. Driver Safety The goal of this course is to enable drivers to recognize and identify hazardous driving conditions and to minimize their risk of accidents. Electrical Safety This course is designed for employees with a low risk of exposure to electrical hazards. It covers general electrical safety in the workplace including the proper use of portable electrical equipment, such as appliances and tools, extension cords, and Ground Fault Circuit Interrupters (GFCI). Fall Protection The goal of this course is to make all employees aware of the requirements for use of Fall Protection, Work Positioning, Fall Restraint, and Fall Arrest systems. Fire Safety The goal of this course is to reduce the financial and personnel cost of fires. Flammable Liquid Safety The learner will correctly apply the principles of hazard recognition, safety, flashpoint protection, and inventory inspections in the use of flammable and combustible liquids in the workplace. Formaldehyde Safety The learner will recognize the occupational hazards and health effects of exposure to formaldehyde and formaldehyde-based products, how this exposure occurs, and the controls necessary to ensure worker safety when exposed to these products in the workplace, including accidental spills or release. Hand and Power Tools Each employee using hand and power tools will recognize definitions and types of portable tools, the potential hazards connected with their use, including manual, electric, pneumatic, hydraulic, liquid-fueled, powder-actuated, and abrasive wheel tools, and will demonstrate the proper procedures required for each type of tool. Hand Safety The goal of this course is to identify the major types and causes of hand injuries and how to prevent them through awareness of hazards, the use of hand protective equipment, and effective safe working practices.
3 Hazard Communication Also available in Spanish To inform workers of their right to know about chemical hazards in their work place and to meet OSHA requirements for providing employees information about the Hazard Communication Standard. Hearing Conservation This course will enable the employee to correctly apply the principles of hazard recognition, risk management, and rights and responsibilities when working in areas where noise is a hazard. Heat and Cold Stress The goal of this course is to reduce the financial and personnel cost of personal injuries on the job resulting in lost work days due to heat stress illness. Incident Investigation In this course the user will recognize the purpose of an incident investigation, learn the investigative procedures to follow, and the kinds of information to be developed. Also covered are the procedures for conducting an interview following the incident, and how to create an incident investigation report. Indoor Air Quality This course is for General Employees whose work tasks are mainly conducted indoors. The goal of this lesson is to provide awareness training to help employees recognize the occupational hazards and health effects of indoor air contaminants and what controls are available to help maintain good indoor air quality. Industrial Ergonomics This course satisfies the general need to minimize the possibility of employee accidents and illness due to chronic work-related physical and psychological stresses. It will also encourage the proper procedures that will maximize productivity and efficiency. Ladder Safety The learner will learn the common terms associated with work on ladders, to recognize the hazards inherent with ladder work, and incorporate general safe practices to reduce or eliminate these hazards. The learner will also recognize the fall protection requirements associated with ladder work, and when, as well as how, to inspect ladders. Lead Awareness The goal of this course is to provide the awareness training that will help workers recognize the occupational hazards and health effects of lead exposure; where lead is found, and the exposure controls Lock and Tag This course, for general worker, provides an understanding of, and compliance with, the lockout/tagout system of their workplace location/facility Office Ergonomics To minimize the possibility of employee accidents and illness due to chronic work-related physical and psychological stresses and maximize productivity and efficiency. Personal Protective Equipment The goal of this course is to provide the information necessary to help employees protect themselves from workrelated illness and injury through the use of Personal protective equipment. Process Safety Management The goal of this lesson is to provide awareness training on "highly hazardous" chemical processes and the importance of having, and following, certain procedures to prevent or minimize the release of these chemicals. Radio Communications Learners will earn to identify why radio operator training is required and how to recognize operator responsibilities. The course will demonstrate correct procedures for calling and acknowledging messages, recognizing code words, and identifying general radio communication requirements.
4 Safety Audits This training is for managers, supervisors, and general employees who may be involved in conducting a safety audit. The goal of this course is to provide awareness training for managers, supervisors, and general employees on the importance of safety audits and how to plan and conduct an audit. Scaffold Safety Each employee working around scaffolds will recognize types of scaffolds, the potential hazards connected with their use, including electrical, structural instability, the danger of falls, and falling objects. The course will also demonstrate proper procedures required for working on or near scaffolds. Slips, Trips, and Falls The goal of this introductory course is to teach employees to identify safe and correct methods for using portable ladders and scaffolds. The student learns to identify good housekeeping practices to prevent accidents, as well as safe procedures for working on elevated surfaces. Traffic Control (Flagger) The students will learn to recognize general guidelines for traffic control; the signs, barriers, flags, stop/slow paddle and lights used at the work site, and clothing regulations.,. The students will also learn how to judge traffic speed and congestion, regulate traffic accordingly. and how to properly position themselves for optimum safety Forklift Operator Forklift 1 - Fundamentals Forklift 2 - Stability and Capacity Forklift 3 - Load Handling Forklift 4 - Safe Driving Practices Forklift 5 - Safety Standards Forklift 6 - Inspection and Maintenance
5 Department of Transportation (DOT) DOT Hazardous Materials General Awareness This course provides general awareness training of the basic requirements of the DOT, including the definition of hazardous materials. Employees who are responsible for the transport of hazardous materials will become familiar with regulations related to packaging, marking, labeling and shipping papers. This course can be used for either new employees or as recurrent training. DOT Training for Drivers of HAZMAT Shipments This course is designed to meet DOT requirements to train each HAZMAT employee who "drives a motor vehicle containing hazardous material." Because more hazardous materials are transported on highways than all other modes of transportation combined, DOT requires that HAZMAT drivers have highway-specific training, in addition to the basic HAZMAT training. This course provides basic HAZMAT training for drivers plus the highwayspecific training in pre-trip safety inspections, general vehicle operation information, vehicle attendance requirements, and safe loading and unloading. This course can be used for either new employees or as refresher training. DOT Training for Offerers of HAZMAT Shipments This course is designed to meet DOT requirements to train all employees who directly affect the safe transportation of hazardous materials. Such employees include those who load, unload, or handle hazardous materials; prepare hazardous materials for transportation; or are responsible for the safety of transporting hazardous materials. This course provides basic hazardous materials training for these employees plus training in DOT requirements for bulk and non-bulk packaging, labeling, loading, and unloading. This course can be used for either new employees or as recurrent training.
SPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
More informationAccident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments
Accidents Causes and Prevention Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments Anatomy of an Accident Asbestos Awareness Asbestos Awareness
More informationWritten Programs Listing
Written Programs Listing Bloodborne Pathogens (BBP) (29CFR1910.1030) This standard requires that precautions be taken to prevent the transmission of bloodborne pathogens. Viruses and bacteria can be found
More informationhttp://www.tfrec.wsu.edu/pages/safety/safety_plan Contents TFREC Occupational Illness and Injury Prevention Plan Section 1. Facilities, Laws and Responsibilities, Disciplinary Policy, Organization and
More informationSafeLandUSA - Syllabus
1. Incident Reporting and Investigation Responsibility for reporting Definition of an incident to report How to report an incident Types of incidents Purpose of incident investigation Explain why incidents
More informationSH&E Training Matrix (Americas, all Business Groups)
SH&E Training Matrix (Americas, all Business Groups) Employee Name: Location: Employee Number: Date: Table 1: All Employees 10 Hour Outreach Course (OSHA General Industry or Construction) 30 Hour Outreach
More information10-Hour OSHA Training
Designated Training Topics 10-Hour OSHA Training This training program is intended to provide entry level construction workers information about their rights, employer responsibilities, and how to file
More informationCommitted to Providing Quality Safety Products and Services. Online Training
Online Training Don t let a lack of time keep you from making your company a safe place to work. Arbill has designed our online education program to be as flexible as you need it to be, allowing you to
More informationNSC Online Workplace Training
ACCIDENT INVESTIGATION What is an Accident Investigation? Learn why an accident investigation is conducted and how to plan the investigation. Importance of gathering information Conducting an effective
More informationEnvironmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY
Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY 2018 360training.com 888-360-TRNG (8764) www.360training.com About 360training.com 360training.com is a privately held,
More informationGIVE ME FIVE VIDEO EXCHANGE CLUB
GIVE ME FIVE VIDEO EXCHANGE CLUB The following programs are available to club members on DVD. An (S) beside a title denotes availability in Spanish. ATTITUDES & MOTIVATION 4778 Take Action To Avoid Distraction
More informationOSHACAMPUS.com TM. powered by 360training. Course Catalog
Course Catalog General Industry Safety Product Catalog General Industry Courses: Advanced Advanced level courses are for Safety Managers and Compliance Officers. They are focused on the compliance aspects
More informationPRINTED COPY IS NOT CONTROLLED Page 1 of 22
The current (electronic) copy of this procedure is found at: Z:/ISDC Procedures and Forms/Current/ (Revision History/Approvals is on last page) 1. PURPOSE The following guidelines are intended to help
More informationA Different Sort Of Knowledge Box
The Oil & Gas Safety Library contains courses addressing Federally Mandated Training, including topics such as: Emergency Response Powered Industrial Equipment Environmental Product/Process Standards Hazard
More informationSAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE
The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included
More informationOnline Course and Lesson Objectives
Online Course and Lesson Objectives 2 0 0 6 - No Downtime - No Travel Expenses - Available 24/7 - Customization - High Retention - Scalability Accident Investigation...3 Aerial Lift Safety...3 Air Emissions...3
More information9/7/2018. Introduction to the. Presenter. Disclaimer ADD PRESENTER PHOTO HERE. Richard A. Lantz, CVI, ASCS, VSMR
New Manual Copyright 2018, All Rights Reserved No part of this publication may be reproduced or distributed by any means, electronic or mechanical, including photocopy, recording, or any other information
More informationCreative A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE PERFORMANCE WITH OUR. COMPREHENSIVE TRAINING SERVICES Revised November 2007
T h e D e l l G r o u p, I n c. Creative s o l u t i o n s for your compliance burdens A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE FORMANCE WITH OUR COMPREHENSIVE TRAINING SERVICES Revised November
More informationCreative Solutions for your compliance burdens
The Dell Group, Inc. Creative Solutions for your compliance burdens A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE FORMANCE WITH OUR COMPREHENSIVE TRAINING SERVICES Revised September 2016 TRAINING
More informationRequired Courses. Total Hours 39
Public Sector Safety & Health Fundamentals Certificate Program for Construction Participants must complete a minimum of seven courses, comprised of required and elective courses, that include a minimum
More informationSafety Orientation OSHA 5(a)(1) General Duty Clause SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE SCOPE
SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE Preventing injuries in the workplace is a primary consideration for Millard. An orientation program has been developed to introduce employees to the warehousing
More informationMid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center
Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center Mid-Del Technology Center provides a wide variety of customized safety and health training. This training can be conducted
More informationOSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant
OSHA Compliance Saves Money, See How They Are Connected Ryan S. Hellman, MS Principal EHS Consultant Why Safety? OSHA Regulations Approximately 50 individual OSHA General & Construction Industry Standards
More informationRISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION
RISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION Revised July 2015 COURSE INFORMATION This course description catalog describes courses offered by or through the Department of
More informationBRIT TEAM PLATEFORM Training Module List
BRIT TEAM PLATEFORM Training Module List Fleet Safety Accident Scene Management Every day, drivers are involved in motor vehicle emergencies and accidents. The goal of this training program is to instruct
More informationCourse outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationAccess Interactive Training Courses at Any Time
OSHA OSHA 10-& 30-hr Online Courses for General Industry Get your workers the DOL/OSHA training they need and save your company both time and money with Summit Training Source s online OSHA 10- and 30-Hour
More informationNew Employee Safety Orientation
New Employee Safety Orientation Introduction Colleges are relatively safe places to work. However, workplace hazards do exist. Siena College, along with the NYC&URMG and., have created this New Employee
More informationThere is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.
OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There
More informationHarley-Davidson Motor Company
Harley-Davidson Motor Company Standardized Contractor Safety Pre-Qualification Form (SCSPF) Complete and email this form to the appropriate facility by clicking on the location below: Arizona Proving Grounds
More informationMIOSHA Administrative Requirements. Chad Ignatowski
MIOSHA Administrative Requirements: Metal Fabrication Industry MIOSHA Administrative Requirements Chad Ignatowski Office: (616) 696-3887 Cell: (616) 240-2739 Email: Chad@AccessSafety.biz www.accesssafety.biz
More informationPromotion of Personal Safety: Chapter 11
Promotion of Personal Safety: Chapter 11 Using Body Mechanics Reasons for using Proper Body Mechanics: Muscles work best when used correctly Makes lifting, pulling, and pushing easier Prevents unnecessary
More informationInstructions: Use this format to prepare the security plans for ACP contracts. EVERY point has to be covered; if they do not apply, write N/A.
APPENDIX F - RISK CONTROL PLAN FORMAT FOR CONTRACTORS OF THE PANAMA CANAL Instructions: Use this format to prepare the security plans for ACP contracts. EVERY point has to be covered; if they do not apply,
More informationEHS Solutions Based in Reality
ETC Compliance Solutions Corporate Office Remittance Address: 5532 E. Grant Rd., AZ 85712 PRSRT STD US POSTAGE PAID, AZ Permit #2216 Serving clients in Arizona & around the world! Site-Specific Training
More informationPreventive Maintenance
A Health and Safety Guideline for Your Workplace Why? Preventive maintenance is predetermined work performed to a schedule with the aim of preventing the wear and tear or sudden failure of equipment components.
More informationWORK HEALTH AND SAFETY
Employees in South Australia are protected by and required to adhere to State & National health and safety regulations. Employers, employees and others all have an important role to play. For further information
More informationJanuary 25, TO: Our Clients. FROM: Will Johnson, Corporate Training Director. SUBJECT: Increase your bottom line, safety is profitable!
January 25, 2011 TO: Our Clients FROM: Will Johnson, Corporate Training Director SUBJECT: Increase your bottom line, safety is profitable! Ladies and Gentlemen: Workplace injuries and illnesses are preventable
More information1 Purpose. 2 Responsibilities. 3 Policy Content ENVIRONMENTAL, HEALTH AND SAFETY STANDARDS. TITLE: CONFINED SPACE ENTRY Document Number: *
(Insert Company Logo) CORPORATE SAFETY MANUAL ENVIRONMENTAL, HEALTH AND SAFETY STANDARDS TITLE: CONFINED SPACE ENTRY Document Number: * Issue Date: Revision Date: * 1 Purpose The purpose of this policy
More informationAccess Interactive Training Courses at Any Time
OSHA OSHA 10-& 30-hr Online Courses for General Industry Get your workers the DOL/OSHA training they need and save your company both time and money with Summit Training Source s online OSHA 10- and 30-Hour
More informationDirectory of Safety Services and Courses
639 N. Salina St., Syracuse, NY 13208 Environmental, Health & Safety Phone: 315-428-1959 Fax: 315-428-0432 Consultants www.churchillenvironmental.com Directory of Safety Services and Courses Office (315)
More informationCalifornia Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM
California Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM OF: POLICY AND RESPONSIBILITY: We are committed to maintaining an injury and illness free workplace. Accordingly we have adopted
More informationWaste Industry Safety & Health
Waste Industry Safety & Health A practical pocket guide for the Waste industry Supported by: Delivering the Solution Together Introduction The Waste Industry Safety and Health (WISH) forum is supporting
More informationJob Hazard Analysis. University of Washington Seattle Campus Facilities Services Campus Engineering & Operations Seattle, WA 98195
Job Hazard Analysis University of Washington Seattle Campus Facilities Services Campus Engineering & Operations Seattle, WA 98195 Working Job Title: Utility Worker 2 (CEO) JHA Completed by Date: The Job
More informationPHCC Educational Foundation Safety Library OSHA General Industry
PHCC Educational Foundation Safety Library OSHA General Industry http://phccweb.360training.com Course Package General Industry Library Package 31.0 hours - $99.00 Package contains following courses: Beryllium
More informationOSHA FIRE INVESTIGATOR OPERATIONS SAFETY CHECKLISTS GENERAL SCENE SAFETY PROCEDURES
OSHA FIRE INVESTIGATOR OPERATIONS SAFETY CHECKLISTS These checklists are provided as examples and are by no means all-inclusive. Fire service and law enforcement agencies should review them and add or
More informationModule: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
More informationManagement Plan for Electrical Safety ISD #535
Management Plan for Electrical Safety ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9 ½ Street Rochester, MN 55904 507-328-4507 MANAGEMENT PLAN FOR ELECTRICAL SAFETY Table of Contents
More informationSelf Inspection Checklist
Self Inspection Checklist Name: Date: Job Name: Title: Time: Job Number: Instructions: Review each lettered subpart under each section that you are responsible for completing. If you have inspected all
More informationOSHA 30 Syllabus. Laborers Training School. Time: 40 hours. Maximum Class Size: 30. Prerequisites: None
Time: 40 hours Maximum Class Size: 30 Prerequisites: None Course Description: The 40-hour OSHA Outreach Training Program provides training for workers and employers on the recognition, avoidance, abatement,
More informationOn-Demand SAFETY Learning Library Catalog
On-Demand SAFETY Learning Library Catalog Click on the course title or scroll down to see each course description. To register, please contact Michelle Spitzer at P A S Associates (661) 631-2165 Michelle@PASassociates.com
More informationANSI A Work Zone Safety for Highway Construction. Scott Schneider, CIH and Travis Parsons Laborers Health and Safety Fund of North America
ANSI A10.47-2009 Work Zone Safety for Highway Construction Scott Schneider, CIH and Travis Parsons Laborers Health and Safety Fund of North America Agenda Introductions History Overview of the Standard
More informationOccupational Health and Safety Act Hazards in the Workplace
Occupational Health and Safety Act Hazards in the Workplace Recognizing Hazards A hazard is anything that can hurt you or the people you supervise or work with. There is a hazard at the root of almost
More informationTraining Videos and Other Materials
Training Materials pg 1 Training Videos and Other Materials (Updated as of 9/23/2015) Title Format Category Length Description 12 Secrets to High Self-esteem CD Professional Includes workbook to print
More informationJob Hazard Analysis (JHA) What is Job Hazard Analysis (JHA)?
Job Hazard Analysis (JHA) How to Analyze Health & Safety Hazards at your worksite Michael Hall, Director CA EH+S TRAINING CENTER 1 What is Job Hazard Analysis (JHA)? It is a method for systematically identifying
More informationA Health and Safety Tip Sheet for School Maintenance Staff. Did you know? Step 1. Identify job hazards. Step 2. Work towards solutions
INSPECTION Health and CHECKLIST Safety Committees MAINTAINING SAFETY: A Health and Safety Tip Sheet for School Maintenance Staff 1 Maintenance and facilities staff members keep schools operational, safe,
More informationSH&E Training Matrix (EMIA)
SH&E Training Matrix (EMIA) Employee ame: Location: Employee umber: Date: 1. Table 5 All Employees - EMIA Required Employee induction within one week of starting at AECOM As required by client of local
More informationESSENTIAL SAFETY RESOURCES
ESSENTIAL SAFETY RESOURCES GS-3018 HAZARD IDENTIFICATION AND RISK ASSESSMENT Originator: Safety Advisor s Signature: Type Name Approval: HSE Manager s Signature: Type Name Approval: Operations Manager
More informationONLINE SAFETY TRAINING PROGRAM SUMMARY
Act First Safety provides best-in-class online/e-learning opportunities for employers and workers. With a selection of 17 programs, including eight (8) programs in French. Choosing Act First Safety is
More informationSection 4. Fundamentals of Accident/Incident Prevention. Accidents/Incidents are Preventable
Fundamentals of Accident/Incident Prevention Accidents/Incidents are Preventable Many people believe that accidents are the inevitable result of unchangeable circumstances, fate, or a matter of bad luck.
More informationCITY AND COUNTY OF DENVER CR&CF RISK UNIT Job Hazard Analysis
CITY AND COUNTY OF DENVER CR&CF RISK UNIT 65.4.1 Job Hazard Analysis 1.0 Introduction The Job Hazard Analysis (JHA) shall be used to describe task specific hazards and to identify control measures that
More informationMAFES Horticultural Facilities AREA-SPECIFIC SAFETY TRAINING GUIDANCE
MAFES Horticultural Facilities AREA-SPECIFIC SAFETY TRAINING GUIDANCE Each University of Maine employee, Faculty, graduate student, and undergraduate shall take the University of Maine Basic Safety Training
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
More informationResponsibilities / Accountability
Responsibilities / Accountability What we will cover Brief history of OPP safety program OPP s commitment to safety Safety responsibilities Accountability for safety Employee expectations History of Safety
More informationHazardous Waste Training Plan. Supersedes: 02/15/16 (Rev.02) Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager
Procedure No.: PA-033-0006 Page: 1 of 19 Port Arthur, TX. Reviewed: 02/18 Effective: 02/06/18 (Rev.03) Supersedes: 02/15/16 Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager Document
More informationB S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
More informationJJ Keller Safety Group Approved Courses
JJ Keller Safety Group Approved Courses For a complete list of course available through JJ Keller, please visit www.pinnacol.com/training Aerial Lifts in Industrial and Construction Environments (45-60
More informationHazard Communication Program. San José State University
San José State University One Washington Square San José, California Facilities Development and Operations Department July 11, 2012 Page intentionally left blank SJSU_Hazard Communication Program_2012-0711.docx
More informationInitial Hazard Specifics Gap Analysis for Fruit & Vegetable Processing
Initial Hazard Specifics Gap Analysis for Fruit & Vegetable Processing Answer the following questions to assist you in identifying the health and safety hazards associated with your processes: Section
More informationSection J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
More informationAccident/Illness Prevention: 6 Keys
Accident/Illness Prevention: 6 Keys 1. Identification of hazards This is the foundation for our Accident Prevention Program. The boxes we have checked in the chart below, "Typical Work Site Hazards or
More informationSUGGESTED TRAINING BY JOB TITLE
As of September 1, 2017 's Aide Art Coach or PE Science Substitute Shop Bus EMERGENCY MANAGEMENT Active Shooter: s S S 37 min Active Shooter: Staff S S S S S S S S S S S S S S S S S S S X 41 min Crisis
More informationHazardous Materials Management. Presented by. James E. Roughton, MS, CSP, CRSP, CHMM.
Hazardous Materials Management Presented by. James E. Roughton, MS, CSP, CRSP, CHMM. Hazardous Waste Operations And Emergency Response (HAZWOPER) 29 CFR 1910.120 Scope Clean-up Operations At Uncontrolled
More informationNational Wireless Training Standard
Skills Based Training Subcommittee In Collaboration with Wireless Industry Safety Task Force and National Association of Tower Erectors (NATE) 2014 Contents Contents Definition of Job Classifications...1
More informationHazardous Materials Management Guidelines
Environmental, Health and Safety Guidelines Hazardous Materials Management Guidelines Applicability These guidelines apply to facilities and activities involving the transportation, production, handling,
More informationOSHA Federal Standards October 1, 2016 September 30, 2017
OSHA Federal Standards October 1, 2016 September 30, 2017 29 CFR 1926 SUBPARTS 29 CFR 1926. C M L L E M M E X M MOST FREQUENTLY CITED SERIOUS VIOLATIONS IN CONSTRUCTION 2017.501(b)(13) FALL PROTECTION
More informationHAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE PLAN Kenyon College
HAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE PLAN Kenyon College PURPOSE The purpose of this Emergency Response Plan is to plan for and execute an organized response to hazardous waste spills or releases
More informationEnvironmental, Safety & Health. Online Learning Courses
Office of the Chancellor and California State University Risk Management Authority (CSURMA) present Online Learning Courses Environmental, Safety & Health . The courses in this catalog are available at
More informationElectrical Safety Work Practices
Work Practices I. SCOPE This program covers any SOUTHWESTERN COMMUNITY COLLEGE employee that may work or be exposed to exposed electrical systems: To assure that employees are not exposed to potentially
More informationWorking Alone Guidelines
Working Alone Guidelines Normal weekday office hours at Carleton University are between 8:30 a.m. and 4:30 p.m., Monday through Friday (excluding any weekday when the university is officially closed).
More informationStaffing Services Client Evaluation Form
Staffing Services Client Evaluation Form Client Name: Location: Contact(s): Completed By: A Safety Performance Experience Modification Factor? OSHA 300 Logs Available? # Of Injuries/Illnesses? Types of
More informationCONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
More informationChapter 1 FF I Orientation and Fire Service History
Chapter 1 FF I Orientation and Fire Service History After completing this lesson, the student shall be able to describe how the history and culture of the fire service influence its basic mission, the
More informationThis written Compressed Gas Plan is kept at the corporate office and in the written Safety & Health Program.
Safety & Health Program 10627 Midwest Industrial Boulevard, St. Louis, MO Phone: 314-785-6425 Fax: 314-785-6426 Compressed Gas Plan Purpose It is the policy of EMA to permit only trained and authorized
More informationPromotion of Safety. Chapter 10 Intro to HST
Promotion of Safety Chapter 10 Intro to HST Using Body Mechanics Unit 1 Prevent strain and help maintain muscle strength Prevent injury to yourself and others Reasons for Using Body Mechanics Muscles work
More informationDon t let a fall shatter your life!
Safety Training Courses 2014-2015 Don t let a fall shatter your life! Browns Ladders & Ceilings Ltd In House Safe Use & Pre-Use Inspection of Ladders & Steps What tests will I undertake? Lecture, theory
More informationTo comply with the OHS Act, the responsible manager must carry out and document the following:
Owner: Manager Health, Wellbeing and Safety Last Update: 10 January 2018 Contents 1. Purpose... 1 2. Minimum Compliance Requirements... 1 3. Definitions... 2 4. Legislative requirements under the OHS Act
More informationLockout / Tag out Program
Lockout / Tag out Program Presented by DOSHTI www.doshti.com You will learn Purpose of Lockout- Tag out Requirements for LOTO Types of Hazardous Energy Procedures for LOTO The OSHA Standard for the Control
More informationCollision Repair Shop Inspection Checklist
Collision Repair Shop Inspection Checklist Note: This is a sample inspection chesklist only, and may mot include all appropriate inspection items. The Occupational Health and Safety Regulation specifies
More informationSafety Training Source
Safety Training Source COURSE CATALOG APRIL 2018 MAP CLIENT SERVICES MAP@SAFETYNATIONAL.COM Table of Contents Accident Investigation - CLMI (Streaming Video)...5 Accident Investigation for Healthcare (Streaming
More informationOmega Safety Training, Inc Hwy 6 North, Ste. 207 Houston, Texas Ph:
Omega Safety Training, Inc. 4654 Hwy 6 North, Ste. 207 Houston, Texas 77084 Ph: 281-979-4849 Email: Chad@omegasafetytraining.com Training Syllabus: P.E.C. 24 Hour Core Compliance SafeLand USA & SafeGulf
More informationTable of Contents. Chapter 1: Health, Safety and Environment Programs. Chapter 2: General Guidelines and Health Control
IADC Health, Safety and Environmental Reference Guide Table of Contents Chapter 1: Health, Safety and Environment Programs Safety Policy Statement... 1 HSE Meetings... 1 Safety Inspections and Logbooks...
More informationWorking Alone Safety Program
Facilities Operations and Development Environmental Health and Safety 1314 Kinnear Road #106 Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404 Fax www.ehs.osu.edu Working Alone Safety Program Prepared
More informationDISTRICT OF COLUMBIA WATER AND SEWER AUTHORITY ATTACHMENT M SAFETY PROVISIONS GOODS AND SERVICES CONTRACTS
DISTRICT OF COLUMBIA WATER AND SEWER AUTHORITY ATTACHMENT M SAFETY PROVISIONS GOODS AND SERVICES CONTRACTS Page 1 of 6 RFP 16-PR-DEM-33 Comprehensive All-Hazards Risk Assessment The Contractor shall comply
More informationLAKE ARROWHEAD COMMUNITY SERVICES DISTRICT STANDARD OPERATING PROCEDURES FACILITY SAFETY The following procedures are to be used by all District employees when working in the District facilities or with
More informationIIUM EVENT SAFETY RISK ASSESSMENT
INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA HAZARD IDENTIFICATION OCCUPATIONAL WORKPLACE SAFETY, HEALTH AND BUILT ENVIRONMENT DEPARTMENT (OSHBE) PRESENTED BY: YBHG. DATO IR. SHAFFEI MOHAMAD IIUM EVENT SAFETY
More informationRelease: 1. UEPOPL002A Licence to operate a reciprocating steam engine
Release: 1 UEPOPL002A Licence to operate a reciprocating steam engine UEPOPL002A Licence to operate a reciprocating steam engine Modification History Not applicable. Unit Descriptor Unit Descriptor 1)
More informationSAFETY STREAMING VIDEO CATALOG
SAFETY STREAMING VIDEO CATALOG November 2014 brickstreet.com 1.866.452.7425 TM Back Safety for Material Handlers Injuries strike more than one million workers every year, resulting in lost time, wages
More informationLOCKOUT/TAGOUT PLAN August 2015
LOCKOUT/TAGOUT PLAN August 2015 Office of Environmental Health and Safety 423-354-5224 TABLE OF CONTENTS Purpose and Intended Use... 2 A. Types of Energy Sources... 2 B. Activities Requiring Lockout/Tagout
More informationSOLAR CONSTRUCTION SAFETY REVIEW QUESTIONS
SOLAR CONSTRUCTION SAFETY REVIEW QUESTIONS Review Quiz: General jobsite safety The following questions and true or false statements help ensure that you understand the material presented in this module.
More information