DECK FILLS & TANK VENTS
|
|
- Evelyn Ryan
- 5 years ago
- Views:
Transcription
1 122 K FILLS & TNK VNTS Standard eck Fills construction Flush profile ap retention cable olor coded graphics Pop-out eck Fills construction Flush profile No key needed olor coded graphics ap retention cable vailable with security key locking overed eck Fills construction Low profile design over conceals mounting hardware olor coded graphics ap retention cable Vented eck Fills vailable in 316 stainless steel or nylon body with stainless steel cap combination Innovative design requires a single mounting hole ap retention cable No need for external vent Flush Tank Vents Low profile tank vent with an attractive design Removable cap allows for easy tank pressure test vailable with straight or 90 degree angle vailable with stainless steel or nylon mounting hardware Tank vent accessory available for a quick 90 degree turn nvironmental eck Fills construction Flush profile Lockable version Provides a seal to minimise vapour emissions Retained filling cap eck Fills and Tank Vents accessories The following table provides an overview of all replacement parts for eck Fills and Tank Vents offered Part Number M M M M M M M K escription Replacement cap for 1.5" locking (pop-out) Replacement cap for 2" locking (pop-out) Replacement cap for 1.5" regular (pop-out) Replacement cap for 2" regular (pop-out) Replacement washer, screw, clip and cable Replacement cap and cable (standard) Replacement standard deck fill key imensions in millimeters (inch) unless otherwise stated
2 123 K FILLS & TNK VNTS nvironmental eck Fills Features a captive hinge cap with rubber seal for minimal vapour emissions Order self-adhesive engraved badges separately 2-1/8 installation hole required for the 2 fill 1 7/8 installation hole required for the 1 1/2 fill Locking & non-locking versions available Part No mm ngle Locking mm mm mm M (1 1/2 ) 0 0 No M (1 1/2 ) 0 0 Yes M (1 1/2 ) 30 0 No 84 (3 5/16 ) 50 (2 ) 84 (3 5/16 ) M (1 1/2 ) 30 0 Yes M (2 ) 0 0 No M (2 ) 0 0 Yes M (2 ) 30 0 No 102 (3 5/16 ) 50 (2 ) 84 (3 5/16 ) M (2 ) 30 0 Yes nvironmental eck Fill adges Self adhesive stainless steel badges Suits all environmental deck fills International symbol and engraved lettering Part number includes a strip of 10 badges adge Part Number M Gas M Petrol M iesel M Water M Fuel M Waste Standard eck Fills Features a spring loaded stainless steel cap retention cable olor-coded international symbol with engraved lettering 1-7/8 installation hole required for the 1-1/2 fill 2-1/8 installation hole required for the 2 fill Part No Model mm mm mm mm ngle M Water 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 74 (3 ) M Waste 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 74 (3 ) M Gas 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 74 (3 ) M iesel 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 74 (3 ) M Fuel 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 74 (3 ) M Gas 50 (2 ) 76 (3 ) 54 (2 1/8 ) 84 (3 5/16 ) M iesel 50 (2 ) 76 (3 ) 54 (2 1/8 ) 84 (3 5/16 ) M Water 38 (1 1/2 ) 90 (3 9/16 ) 45 (1 3/4 ) 74 (3 ) M Waste 38 (1 1/2 ) 90 (3 9/16 ) 45 (1 3/4 ) 74 (3 ) M Gas 38 (1 1/2 ) 90 (3 9/16 ) 45 (1 3/4 ) 74 (3 ) M iesel 38 (1 1/2 ) 90 (3 9/16 ) 45 (1 3/4 ) 74 (3 ) M Fuel 38 (1 1/2 ) 90 (3 9/16 ) 45 (1 3/4 ) 74 (3 ) M Gas 50 (2 ) 102 (4 ) 54 (2 1/8 ) 84 (3 5/16 ) M iesel 50 (2 ) 102 (4 ) 54 (2 1/8 ) 84 (3 5/16 ) M K Key Only imensions in millimeters (inch) unless otherwise stated
3 124 K FILLS & TNK VNTS POP-OUT K FILL Pop-out center on cap for easy keyless operation vailable with keyed or standard cap Features a spring loaded stainless steel cap retention cable olor-coded international symbol with engraved lettering 1-7/8 installation hole required for the 1-1/2 fill 2-1/8 installation hole required for the 2 fill Part No Model mm mm mm mm M Water 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 76 (3 ) M Waste 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 76 (3 ) M Gas 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 76 (3 ) M iesel 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 76 (3 ) M Gas 50 (2 ) 76 (3 ) 54 (2 1/8 ) 84 (3 5/16 ) M iesel 50 (2 ) 76 (3 ) 54 (2 1/8 ) 84 (3 5/16 ) For keyed cap option add -L after the part number FULL OVR K FILL ll stainless steel construction. Features an easy grip cap with simple adjustment of orientation after final installation Features a spring loaded stainless steel cap retention cable 1-7/8 single installation hole is required, 5/8 vented barb Part No Model mm mm mm mm ngle M Water 38 (1 1/2 ) (4 3/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) 30 0 M Waste 38 (1 1/2 ) (4 3/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) 30 0 M Gas 38 (1 1/2 ) (4 3/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) 30 0 M Gas 50 (2 ) 123 (4 7/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) 30 0 M Water 38 (1 1/2 ) 98 (3 7/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) - M Waste 38 (1 1/2 ) 98 (3 7/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) - M Gas 38 (1 1/2 ) 98 (3 7/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) - M iesel 38 (1 1/2 ) 98 (3 7/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) - M iesel 50 (2 ) 114 (4 1/2 ) 79.5 (3 1/8 ) 12.5 (1/2 ) - imensions in millimeters (inch) unless otherwise stated
4 125 K FILLS & TNK VNTS 90 FLUSH TNK VNT 90 angle design Unique design allows recessed flush mounting in the hull or cabin sides, protecting the vent body Modern attractive appearance and high airflow capacity arb up installation to prevent tank contamination eep or shallow cup provides for installation in material thickness up to 33mm (1-5/16 ) Part No mm mm mm mm -Max. M (5/8 ) 70 (2 3/4 ) 35 (1 3/8 ) 46 (1 13/16 ) 0-18 (0-3/4 ) M (3/4 ) 75 (3 ) 38 (1 1/2 ) 49 (1 15/16 ) 0-18 (0-3/4 ) M (5/8 ) 70 (2 3/4 ) 35 (1 3/8 ) 46 (1 13/16 ) (3/4-1 5/16 ) M (3/4 ) 75 (3 ) 38 (1 1/2 ) 49 (1 15/16 ) (3/4-1 5/16 ) STRIGHT FLUSH TNK VNT Straight angle design Unique design permits recessed flush mounting in the hull or cabin sides, protecting the vent body ttractive appearance and high airflow capacity Part No mm mm mm mm Max. M (5/8 ) 76 (3 ) 35 (1 3/8 ) 46 (1 13/16 ) 0-18 (0-3/4 ) imensions in millimeters (inch) unless otherwise stated
5 126 K FILLS & TNK VNTS NYSTL TNK VNT body with nylon cup and nut Flushed installation Removable cap and test fitting allow for quick and easy fuel system pressure check Suitable for 4-28mm material thickness Same face size for 16mm (6/8 ) and 19mm (3/4 ) barb fitting Part No mm mm mm mm Max. M (5/8 ) 71 (2 13/16) 38 (1 1/2 ) 48 (1 7/8 ) 19 (3/4 ) 90 STLON THRU HULL TNK VNT Nylon body with 316 stainless steel cap 90 angle design omes with a stainless steel integral screen Part No mm mm mm mm mm M (5/8 ) 69 (2 3/4 ) 33 (1 3/8 ) 48 (1 7/8 ) 25 (1 ) imensions in millimeters (inch) unless otherwise stated
6 127 K FILLS & TNK VNTS STLON TNK VNT body with nylon cup and nut vailable in straight or 90 angle design Various cup sizes and depths allow for installation in different material thickness Match with the Southco stainless steel thru hull design omes with stainless steel integral screen Part No Model mm mm mm mm mm M Straight 16 (5/8 ) 76 (3 ) 35 (1 3/8 ) 45 (1 3/4 ) 18 (3/4 ) M (5/8 ) 70 (2 3/4 ) 35 (1 3/8 ) 45 (1 3/4 ) 16 (5/8 ) 90 STLON TNK VNT Nylon body with 316 stainless steel cup omes with stainless steel integral screen Part No Model mm mm mm mm mm M (5/8 ) 70 (2 3/4 ) 35 (1 3/8 ) 45 (1 3/4 ) 16 (5/8 ) imensions in millimeters (inch) unless otherwise stated
7 128 THRU HULLS Standard Stainless Steel Thru Hulls 316 Stainless steel construction vailable with barb pipes Promotes a small visual footprint onsistent appearance across six different hose diameters Nysteel Thru Hulls 316 Stainless steel and high nickel content provides non-magnetic properties and superior corrosion resistance Light weight thru hull technology vailable with a straight or 90 degree angle Offers a one man installation with a key barb feature vailable with round face Stalon Thru Hulls 316 Stainless steel face plate and nylon body offers a light weight thru hull technology with a stainless look vailable in both straight, 90 degree and 15 degree angle designs o-injected material under the face plate provides a permanent attachment xhaust Thru Hulls 316 Stainless steel construction Incorporates a drip ring to avoid hull streaking Flapper stops water intrusion vailable with a straight or 25 degree angle design ight position angle adjustment Manifold ssemblies ssembly includes thru hull and manifold vailable in 316 stainless steel imensions in millimeters (inch) unless otherwise stated
8 129 THRU HULLS THRU HULL WITH R FITTING Reduced face size promotes a small visual footprint vailable in 3 body sizes and fits the 6 most popular barb fittings Part No mm mm mm mm mm M (5/8 ) 76 (3 ) 32 (1 1/4 ) 43 (1 11/16 ) 30 (1 3/16 ) M (1 1/8 ) 56 (2 1/4 ) 32 (1 1/4 ) 42 (1 15/84 ) 22 (7/8 ) M (3/4 ) 76 (3 ) 32 (1 1/4 ) 43 (1 11/16 ) 30 (1 3/16 ) M (3/4 ) 120 (4 3/4 ) 32 (1 1/4 ) 44 (1 3/4 ) 73 (2 7/8 ) M (1 ) 76 (3 ) 32 (1 1/4 ) 44 (1 3/4 ) 30 (1 3/16 ) M (1 ) 120 (4 3/4 ) 32 (1 1/4 ) 44 (1 3/4 ) 73 (2 7/8 ) M (3/4 ) 53 (2 1/16 ) 32 (1 1/4 ) 42 (1 5/8 ) 20 (3/4 ) M (1 1/8 ) 76 (3 ) 32 (1 1/4 ) 43 (1 11/16 ) 30 (1 3/16 ) M (1 1/8 ) 120 (4 3/4 ) 32 (1 1/4 ) 44 (1 3/4 ) 73 (2 7/8 ) M (1 1/4 ) 88 (3 1/2 ) 44 (1 3/4 ) 65 (2 9/16 ) 33 (1 5/16 ) M (1 1/2 ) 88 (3 1/2 ) 44 (1 3/4 ) 65 (2 9/16 ) 33 (1 5/16 ) M (1 1/2 ) 133 (5 1/4 ) 44 (1 3/4 ) 65 (2 9/16 ) 75 (3 ) M (2 ) 133 (5 1/4 ) 55 (2 3/16 ) 82 (3 1/4 ) 50 (2 ) 90 SHORT THRU HULL Face size is identical to the Southco standard thru hull fitting Part No mm mm mm mm mm M (5/8 ) 60 (2 3/8 ) 32 (1 1/4 ) 43 (1 11/16 ) 17 (11/16 ) M (3/4 ) 62 (2 7/16 ) 32 (1 1/4 ) 43 (1 11/16 ) 17 (11/16 ) M (1 ) 65 (2 9/16 ) 32 (1 1/4 ) 43 (1 11/16 ) 17 (11/16 ) M (1 1/8 ) 67 (2 5/8 ) 32 (1 1/4 ) 43 (1 11/16 ) 14 (9/16 ) M (1 1/2 ) 81 (3 3/16 ) 41 (1 5/8 ) 58 (2 9/32 ) 14 (9/16 ) imensions in millimeters (inch) unless otherwise stated
9 130 THRU HULLS NYSTL THRU HULL with nylon nut ttractive round face design Innovative cast thread technology minimizes rust potential Light-weight design Two face sizes Part No mm mm mm mm mm M (1 1/8 ) 75 (2 7/8 ) 32 (1 1/4 ) 43 (1 11/16 ) 29 (1 1/8 ) M (1 1/2 ) 87 (3 7/16 ) 41 (1 5/8 ) 55 (2 3/16 ) 29 (1 1/8 ) STLON THRU HULL Nylon body with 316 stainless steel cap Light-weight design with a stainless steel appearance Part No mm mm mm mm mm M (5/8 ) 81 (3 3/16 ) 33 (1 5/16 ) 48 (1 7/8 ) 28 (1 1/8 ) M (3/4 ) 86 (3 3/8 ) 33 (1 5/16 ) 48 (1 7/8 ) 28 (1 1/8 ) M (1 ) 86 (3 3/8 ) 33 (1 5/16 ) 48 (1 7/8 ) 28 (1 1/8 ) M (1 1/8 ) 87 (3 7/16 ) 33 (1 5/16 ) 48 (1 7/8 ) 28 (1 1/8 ) M (1 1/4 ) 103 (4 1/16 ) 41 (1 5/8 ) 60 (2 3/8 ) 33 (1 5/16 ) M (1 1/2 ) 103 (4 1/16 ) 41 (1 5/8 ) 60 (2 3/8 ) 33 (1 5/16 ) M (2 ) 130 (5 1/8 ) 56 (2 1/4 ) 82 (3 1/4 ) 46 (1 13/16 ) M (3/4 ) 144 (5 11/16 ) 33 (1 5/16 ) 48 (1 7/8 ) 86 (3 7/16 ) M (1 1/8 ) 144 (5 11/16 ) 33 (1 5/16 ) 48 (1 7/8 ) 86 (3 7/16 ) imensions in millimeters (inch) unless otherwise stated
10 131 THRU HULLS STLON THRU HULL NGL Nylon & 316 Stainless Steel ap arb down angle design eliminates water trapping in the drain hose. Part No Model mm mm mm mm mm M (1 1/2 ) 178 (7 ) 56 (2 1/4 ) 82 (3 1/4 ) 100 (4 ) 90 STLON THRU HULL Nylon body with 316 stainless steel cap 90 angled barb design Same face design as the Southco straight stalon thru hull Light-weight design with a stainless steel appearance Part No mm mm mm mm mm M (5/8 ) 69 (2 3/4 ) 33 (1 5/16 ) 48 (1 7/8 ) 25 (1 ) M (3/4 ) 69 (2 3/4 ) 33 (1 5/16 ) 48 (1 7/8 ) 25 (1 ) M (3/4 ) 81 (3 3/16 ) 33 (1 5/16 ) 48 (1 7/8 ) 28 (1 1/8 ) M (1 ) 95 (3 3/4 ) 33 (1 5/16 ) 48 (1 7/8 ) 50 (2 ) M (1 1/8 ) 92 (3 5/8 ) 33 (1 5/16 ) 48 (1 7/8 ) 35 (1 3/8 ) M (1 1/8 ) 115 (4 1/2 ) 40 (1 5/8 ) 60 (2 3/8 ) 28 (1 1/8 ) M (1 1/2 ) 119 (4 11/16 ) 40 (1 5/8 ) 60 (2 3/8 ) 33 (1 5/16 ) M (2 ) 124 (4 7/8 ) 56 (2 1/4 ) 83 (3 1/4 ) 38 (1 1/2 ) imensions in millimeters (inch) unless otherwise stated
11 132 THRU HULLS XHUST THRU HULL Innovative design features a stainless steel flapper and drip collar to prevent water intrusion and streaking of hull The one part collar features a flapper insert which can be rotated every 45 for the desired angle use F Part No Straight or mm mm mm mm mm 25 0 M One Part 50 (2 ) 138 (5 1/2 ) 57 (2 1/4 ) 80 (3 3/16 ) 53 (2 1/16 ) M One Part 64 (2 1/2 ) 146 (5 3/4 ) 88 (3 1/2 ) 118 (4 5/8 ) 46 (1 7/8 ) M One Part 76 (3 ) 146 (5 3/4 ) 88 (3 1/2 ) 118 (4 5/8 ) 46 (1 7/8 ) M One Part 50 (2 ) 152 (6 ) 57 (2 1/4 ) 80 (3 3/16 ) 53 (2 1/16 ) STINLSS STL MNIFOL 316 Stainless Steel Features three 19mm (3/4 ) staggered female pipe discharge parts Part No mm mm mm mm M (2 9/16 ) 170 (6 11/16 ) 45 (1 3/4 ) 68 (2 11/16 ) imensions in millimeters (inch) unless otherwise stated
12 133 RINS Stalon ockpit rain Nylon body and 316 stainless steel face pace provides a stainless appearance Flush profile ompact design with minimal internal protrusion vailable as mini version Scuppers vailable in 316 stainless steel or stalon construction vailable with barb or thread pipes Features either a check valve or a check ball to prevent water entry and enable a one way water flow F Shower rains construction Small drain holes prevent hair and dirt from entering the drain esigned to be comfortable to step on rain Plugs vailable 316 stainless steel aptured plug can be opened and closed by hand vailable in two sizes Hooded ompartment rain 316 Stainless steel cap with nylon threaded tube asy installation Heavy duty cast construction rain ccessories arb adapters ockpit drain system imensions in millimeters (inch) unless otherwise stated
13 134 RINS MINI OMPRTMNT RIN Stamped 304 stainless steel drain tube and rubber grip barb Suitable for deck and hatch gutter drains F Part No mm mm mm mm mm M (5/8 ) 12 (1/2 ) 12 (1/2 ) 18 (3/4 ) 9 (3/8 ) M (3/4 ) 44 (1 3/4 ) 16 (5/8 ) 22 (7/8 ) 9 (3/8 ) M (1 ) 44 (1 3/4 ) 22 (7/8 ) 29 (1 1/8 ) 9 (3/8 ) 90 SI MOUNT OKPIT RIN Nylon body with 316 stainless steel cap esigned to be mounted flush to the deck for complete drainage Hose barb design suitable for installation in tight spaces Part No Size mm mm mm mm mm M /2 38 (1 1/2 ) 44 (1 3/4) 63.5 (2 1/2 ) 102 (5 ) 57 (2 1/4 ) M Temporary plug for / K RIN SUPPR KIT Nylon body with 316 stainless steel grate ompact design is suitable for applications with limited space One-way check ball design ll parts are NPSM threaded vailable in two drain head designs Part No rain Head mm mm mm mm M (2 ) 82 (3 1/4 ) 27 (1 1/16 ) 38 (1 1/2 ) 58 (2 1/4 ) M (2 ) 75 (3 ) 27 (1 1/16 ) 38 (1 1/2 ) 58 (2 1/4 ) imensions in millimeters (inch) unless otherwise stated
14 135 RINS RIN SHOWR FITTING WITH PIP THR & arb adaptors Fits 90 stainless steel adapters and stainless steel pipe thread adapters esigned to be used as sink, shower or deck drains vailable as surface mount versions Part No mm mm mm S.S. Nut ngle M (1 1/4 ) 15 (5/8 ) 42 (1 5/8 ) No - M (1 3/4 ) 18 (11/16 ) 70 (2 3/4 ) No - M (1 3/4 ) 50 (2 ) 70 (2 3/4 ) Yes - M (1 1/4 ) 18 (11/16 ) 50 (2 ) 70 (2 3/4 ) 90 0 Surface Mount Version M (3/4 ) N/ 68 (2 3/4 ) N/ 90 0 M (1 ) N/ 68 (2 3/4 ) N/ 90 0 F M (1 1/2 ) N/ 68 (2 3/4 ) N/ 90 0 SHOWR K RIN WITH NYLON PTR 316 Stainless Steel rain grate designed to maximize water flow. Part No mm mm Gasket Nut M (1 1/2 ) 52 (2 ) 75 (2 15/16 ) 8 mm Yes M (1 1/2 ) 27 (1 1/16 ) 75 (2 15/16 ) 3 mm Yes M (2 ) 27 (1 1/16 ) 75 (2 15/16 ) 3 mm No K SHOWR RIN SUPPRS Polished cover over can be removed for cleaning Incorporates one-way check ball design rain grate key included Part No Model mm mm mm mm M (1 1/2 ) 58 (2 1/4 ) 115 (4 1/2 ) 91 (3 5/8 ) M (1 1/2 ) 57 (2 1/4 ) 79 (3 1/8 ) 91 (3 5/8 ) imensions in millimeters (inch) unless otherwise stated
15 136 RINS OKPIT RIN SYSTM omes with a removable one-way flow diaphragm & stopper plug Tube can be cut to desired length F Part No mm mm M (2 ) 127 (5 ) M (1 1/2 ) 127 (5 ) SUPPR WITH R FITTING Straight angle design Features a flexible one-way PV check valve Prevents water from entering the boat Part No mm mm mm mm mm M (1 1/2 ) 110 (4 3/8 ) 53 (2 1/16 ) 65 (2 1/2 ) 42 (1 5/8 ) M (1 1/2 ) 148 (5 7/8 ) 53 (2 1/16 ) 65 (2 1/2 ) 81 (3 3/16 ) M (2 ) 154 (6 1/16 ) 53 (2 1/16 ) 65 (2 1/2 ) 81 (3 3/16 ) M (2 ) 96 (3 3/4 ) 53 (2 1/16 ) 65 (2 1/2 ) 27 (1 1/16 ) 90 STLON SUPPR Nylon body with 316 stainless steel cap 90 angle design Prevents water from entering the boat Part No mm mm mm mm mm M (1 1/2 ) 120 (4 3/4 ) 56 (2 1/4 ) 82 (3 1/4 ) 21 (13/16 ) SUPPR WITH PIP FITTING Straight angle design Features a flexible one-way PV check valve Prevents water from entering the boat Part No mm mm mm mm mm M (1 1/2 ) 79 (3 1/8 ) 53 (2 1/16 ) 65 (2 1/2 ) 29 (1 1/8 ) imensions in millimeters (inch) unless otherwise stated
16 137 RINS STLON SUPPR Nylon body with 316 stainless steel cap Light-weight design with a stainless steel appearance Tested to STM 638 and STM 790 Features a one-way PV check valve Part No Model mm mm mm mm mm M (1 1/2 ) 133 (5 1/4 ) 56 (2 1/4 ) 82 (3 1/4 ) 44 (1 3/4 ) M (2 ) 133 (5 1/4 ) 56 (2 1/4 ) 82 (3 1/4 ) 44 (1 3/4 ) M (1 1/2 ) 95 (3 3/4 ) 56 (2 1/4 ) 82 (3 1/4 ) 38 (1 1/2 ) M (1 1/2 ) 178 (7 ) 56 (2 1/4 ) 82 (3 1/4 ) 100 (4 ) M heck Valve Only/Flapper F HOO OMPRTMNT RIN Nylon body with 316 stainless steel hood Suitable for drainage for above waterline compartments vailable with or without drain plug Part No Type mm mm mm mm mm M W/O Plug Female 48 (1 7/8 ) 40 (1 1/2 ) 54 (2 1/8 ) 25 (1 ) 17 (11/16 ) M W Plug Female 48 (1 7/8 ) 40 (1 1/2 ) 54 (2 1/8 ) 25 (1 ) 17 (11/16 ) HOO OMPRTMNT WITH R PIP Nylon body with 316 stainless steel hood Suitable for drainage for above waterline compartments Part No Type mm mm mm mm mm F mm G mm M Male arb 48 (1 7/8 ) 40 (1 1/2 ) 96 (3 3/4 ) 25 (1 ) 16 (5/8 ) 40 (1 9/16 ) 40 (1 9/16 ) M Male arb 48 (1 7/8 ) 40 (1 1/2 ) 96 (3 3/4 ) 25 (1 ) 19 (3/4 ) 40 (1 9/16 ) 42 (1 5/8 ) G F OVL RIN PLUG, and stainless steel nylon retaining plug Retention cap can be operated by hand rain plug is held captive to the housing Part No Material mm mm mm M Stainless steel 54 (2 1/8 ) 25 (1 ) 12 (1/2 ) M Stainless steel 64 (2 1/2 ) 32 (1 1/4 ) 19 (3/4 ) imensions in millimeters (inch) unless otherwise stated
17 138 LTRONI SS SOUTHO lectronic ccess Solutions Over 60 years of innovative engineered access solutions now combined with electronic actuation for remote control and monitoring of SOUTHO products. SOUTHO electromechanical latch and lock solutions can be remotely operated by a variety of access control options such as electronic keys, keypads, RF proximity readers, RF key fobs, biometrics and custom switches. G Southco s electronic key system provides secure access control with an intuitive one touch actuation. liminates key management issues keys are easily programmed as needed Simply touch probe with programming key to enter programming mode to add or delete user keys Lock/unlock signal produced by simply touching valid iutton key to probe Programmable output timing 280 trillion possible key codes no duplication Sleep mode for minimal current draw L s integrated with probe for programming and lock status feedback ontrols all SOUTHO electromechanical locks and latches For additional details, go to System Part Number -90 System includes 1 Probe, 1 ontroller, and 1 Wire Harness. lectronic key is constructed using corrosion resistant materials suitable for marine applications. The Junction box enables up to 2 electromechanical latches to be controlled by up to 2 access control systems. imensions in millimeters (inch) unless otherwise stated
18 139 LTRONI SS lectromechanical Latching Southco's primary focus is the electromechanical latching or locking device, the most critical element of the electronic access system. Southco has combined electronics with our extensive knowledge of mechanical access solutions to create a set of innovative electromechanical latch and lock solutions. Our intelligent latches can provide a latch status feedback signal and can be easily incorporated into a fully integrated control system or used as a stand-alone device. Our expanding range of electronic access solutions provide an easy upgrade to our existing range of mechanical access systems. hallenge Southco Marine to integrate an electronic solution to your cabin doors or deck applications or visit our website for more information. G Visible mechanical solution oncealed mechanical solution oncealed electromechanical (local or remote actuation) solution (stand-alone or fully integrated into control system) imensions in millimeters (inch) unless otherwise stated
19 140 SOUTHO Warranty Seller warrants that the products manufactured and sold by Seller shall be in accordance with Seller's specifications and free from defects in material and workmanship for a period of one (1) year from the date of delivery to uyer if used under normal circumstances and provided any defect(s) are not the result of: (i) installation method; (ii) customer or third party abuse or misuse; (iii) failure to adhere to Seller's instructions; or (iv) except as otherwise may be specifically stated in Seller's product literature, wear or deterioration due to environmental conditions. uyer shall give written notice to Seller within 20 days of the discovery of any alleged defect within such one (1) year period, and any action shall be brought within one (1) year after such breach of warranty is or should have been discovered. The above is the sole and exclusive warranty of Seller; there are no other warranties, either express or implied, as to any matter whatsoever, including, without limitation, the IMPLI WRRNTIS OF MRHNTILITY OR FITNSS FOR PRTIULR PURPOS. The sole and exclusive remedy of uyer for any breach of warranty by Seller shall be that Seller shall provide, upon confirmation of the defective condition of the subject part, at no cost to uyer, a replacement part for each defective part manufactured and sold by Seller to uyer, or at uyer's choice, uyer shall receive a credit toward a future purchase in an amount equal to the purchase price paid by Seller for defective parts. In no event shall seller be liable for consequential or indirect damages, or economic losses, loss of use, lost profits, down time or damages due to delay, whether by reason of breach of warranty, breach of contract, negligence, strict liability or otherwise.
Compact Triple Cabinet Outlet Station Model Installation and Operating Instructions
Compact Triple Cabinet Outlet Station Model 6258-1 Installation and Operating Instructions The Porter Compact Triple Outlet Station (6258-1) provides a quick, safe, and reliable method of connection to
More informationACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series
M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited
More informationBS Series Basket Strainer
BS Series Basket Strainer Operating, Installation, & Maintenance Manual Corrosion Resistant Fluid and Air Handling Systems. Dated 04-26-12 PRESSURE DROP SIMTECH strainers are engineered to offer the lowest
More informationGETZ EQUIPMENT INNOVATORS PART No. 4G59678 CARBON DIOXIDE MINI PUMP FOR EXTINGUISHER SERVICE (Revised )
GETZ EQUIPMENT INNOVATORS PART No. 4G59678 CARBON DIOXIDE MINI PUMP FOR EXTINGUISHER SERVICE (Revised 11-24-10) 2320 Lakecrest Drive, Pekin IL 61554 PH. (888) 747-4389 Fax (309) 495-0625 Website: www.getzequipment.com
More informationFLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
More informationRegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
More informationROPV R40 E Series User Manual
HARBIN ROPV INDUSTRY DEVELOPMENT CENTER ROPV R40 E Series User Manual For Use with the Following ROPV Pressure Vessel Models: R40 300E R40 450E Headquarters Tel:(+86)451-82267301 Fax:(+86)451-82267303
More informationCompact Triple Cabinet Outlet Station Model B Installation and Operating Instructions
PORTER Parker Hannifin Corporation Porter Instrument Division 245 Township Line Rd. P.O. Box 907 Hatfield, PA 19440-0907 USA (215) 723-4000 / fax (215) 723-5106 Compact Triple Cabinet Outlet Station Model
More informationFLANGED MULTI-PORT BALL VALVES
INTRODUCTION This instruction manual includes installation, operation and maintenance information for flanged multi-port ball valves. This manual addresses lever operated ball valves only. Please refer
More information3800 SERIES END SUCTION PUMP REPAIR PARTS INDEX. Model Model 3804
Model 3801 Model 3804 3800 SERIES END SUCTION PUMP REPAIR PARTS INDEX NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains
More informationINSTALLATION MANUAL Matheson Tri-Gas Cabinet Enclosures
INSTALLATION MANUAL Matheson Tri-Gas Cabinet Enclosures MINT-0289-XX TABLE OF CONTENTS Limited Warranty... 3 User Responsibility... 3-4 General Service... 4 Safety Precautions.... 5 Physical Dimensions..
More informationFLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
More informationWELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
More informationATD /8 x 50 Retractable Air Hose Reel Owner s Manual
ATD-31166 3/8 x 50 Retractable Air Hose Reel Owner s Manual Features Heavy-gauge, all-steel reel assembly 8-position ratchet mechanism locks reel at desired hose length 5-position adjustable roller outlet
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationSOTR Special Operations Tactical Respirator
SOTR Special Operations Tactical Respirator OPERATOR S MANUAL FOR INDIVIDUAL RESPIRATORY PROTECTION OPS-CORE 2018 OMM G055-1000 REV. B INTRODUCTION ABOUT YOUR SOTR The Ops-Core Special Operations Tactical
More information2016 /17 Catalog. distributed exclusively throughout the U.S by
BALL VALVES/SEACOCKS Ball Valve ½ NPS 90659 2211 Ball Valve ¾ NPS 90660 2228 Ball Valve 1 NPS 90661 2235 Ball Valve 1¼ NPS 90662* 2242 Ball Valve 1½ NPS 90663 2259 Ball Valve 2 NPS 90664 2266 THRU-HULL
More informationPressure Injection Cell Operator s Manual
Pressure Injection Cell Operator s Manual Operator s Manual Pressure Injection Cell CONGRATULATIONS! Congratulations on your purchase of a Next Advance Pressure Injection Cell. Please read this operator
More informationThis document to be used with Hurley traditional Davits
~ InstructIon Manual ~ This document to be used with Hurley traditional Davits WarnIngs WarnIng - Failure to install, maintain, protect, and operate the system properly can cause malfunction resulting
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationKJ4000 Operating Instructions & Parts Manual NSN
KJ4000 Operating Instructions & Parts Manual NSN 1025-01-473-7710 Mandus Group Ltd. KJ4000 Operators Manual Date: 3 Jan. 2002 TABLE OF CONTENTS General Safety Instructions...Page 1 Operator Instructions...Page
More informationWEATHERIZING INSTRUCTIONS
FOR PNEUMATIC MASTS The Will-Burt Company 169 S. Main Street Orrville, OH 44667 www.willburt.com TP-4744301-C, 2017 The Will-Burt Company Pneumatic Mast Warranty Will-Burt warrants its pneumatic masts
More informationInstallation and Operation Manual
Installation and Operation Manual WIKA FLR-SBDF / BLR-SBDF Magnetic Level Transmitter (Please retain for future usage) Contact: Gayesco-WIKA USA, L.P. 229 Beltway Green Boulevard Pasadena, TX 77503 www.wika.com
More informationViega Advantix Vario. Millimetre precision. Unlimited flexibility.
Viega Advantix Vario Millimetre precision. Unlimited flexibility. Viega Advantix Vario Individuality in its most beautiful form. Demanding design and high-quality materials have long since been par for
More informationAPCO ARV CLEAN WATER AIR RELEASE VALVES. Model 50A
APCO ARV CLEAN WATER AIR RELEASE VALVES Model 50A Instruction D12013 February 2017 Instructions These instructions provide installation, operation and maintenance information for APCO ARV Clean Water Air
More informationInflatable Stand Up Paddle Board Manual
Inflatable Stand Up Paddle Board Manual V-Max AIR 12 6 Voyager AIR 11 6 Koa AIR 10 2 and 10 8 Heavy duty built in carrying handles Steel D Ring Built in Cargo Straps EVA Deck Pad High Pressure Air Valve
More informationGETZ EQUIPMENT INNOVATORS PART NO.: 9G59554 MODEL: MS 36 SC-R HYDROSTATIC TEST PUMP
GETZ EQUIPMENT INNOVATORS PART NO.: 9G59554 MODEL: MS 36 SC-R HYDROSTATIC TEST PUMP LIMITED WARRANTY Getz Equipment Innovators warrants its products, and component parts of any product manufactured by
More informationSERIES BB TRASH BASKETS
SERIES BB TRASH BASKETS T AB L E O F C O N T E N T S V e n d o r D a t a Ap p l i c a t i o n a n d S p e c i f i c a t i o n Installation and Maintenance Instructions Limited Warranty 1 VENDOR DATA HALLIDAY
More informationG7S Hand Pump Owner s Manual
G7S Hand Pump Owner s Manual Copyright Air Venturi 2018 Version 4-18 Specifications 24.80 inches long closed 43.31 inches long extended 4500 psi/310 bar max pressure Features Integral manometer (pressure
More informationAPCO ASU-SCAV & ASU-CAV SINGLE BODY COMBINATION AIR VALVES
APCO ASU-SCAV & ASU-CAV SINGLE BODY COMBINATION AIR VALVES Instruction D12039 December 2015 Instructions These instructions provide installation, operation and maintenance information for the. They are
More informationHenry Pratt Diviner Position Indicator. Operation and Maintenance Manual. Job Name: Contractor: Date: Document #:DIVPOSNOM Revision Date: 2/9/11
Henry Pratt Diviner Position Indicator Operation and Maintenance Manual Job Name: Contractor: Date: Document #:DIVPOSNOM Revision Date: 2/9/11 SAFETY MESSAGES All safety messages in the instructions are
More information13 - Fishing Accessories - Bait Stations
13 - Fishing ccessories - Bait Stations Deluxe Jet Ski Bait Station This universal mount bait station suits all models of jet skis. 316 grade stainless steel frame with 3 x rod holders, handles & mount
More informationHot Tapping Machine. OPERATIONS MANUAL and OPERATING INSTRUCTIONS
262-2040 Hot Tapping Machine For performing 1/4 6 Hot taps 285 psi or less. Municipal Water, Sewage, & Building Services Use OPERATIONS MANUAL and OPERATING INSTRUCTIONS WARNING: These instructions are
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationD Series Air and Water Kit Part# 02550
D Series Air and Water Kit Part# 02550 Unpacking Please open and inspect your package upon receipt. Your package was packed with great care and all the necessary packing materials to arrive to you undamaged.
More informationINSTRUCTION MANUAL. FLOW CONTROL DRAWERS MANUAL / PLC CONTROL SERIES Model Version Perma Pure LLC Tel:
PERMA PURE INSTRUCTION MANUAL FLOW CONTROL DRAWERS MANUAL / PLC CONTROL SERIES Model 3300 Version 4.06 Perma Pure LLC Tel: 732-244-0010 P.O. Box 2105, 8 Executive Drive Tel: 800-337-3762 (toll free US)
More informationMedia-Isolated Mag Plus Probe Low Pressure-ISO Kit
Manual No: 577013-975 Revision: B Media-Isolated Mag Plus Probe Low Pressure-ISO Kit Installation Guide Notice Veeder-Root makes no warranty of any kind with regard to this publication, including, but
More informationSUMMITTM 400 & 600. Natural Gas Barbecues. Step-By-Step Guide
SUMMITTM 400 & 600 Natural Gas Barbecues Step-By-Step Guide W E B E R W E B E R W E B E R W E B E R Summit 400 NG Summit 600 NG CANADIAN GAS ASSOCIATION R A P P R O V E D WARNING: Follow all leak check
More informationInstallation Instructions JATCO Environmental Protection Tank Model J-5000CX
Installation Instructions JATCO Environmental Protection Tank Model J-5000CX The JATCO Environment Tank must be installed at a level which will allow the waste liquids to be disposed of to gravity flow
More informationACCU-MIX 1200 / / 26270
ACCU-MIX 1200 / 14100 / 26270 Model 102006 (1200) Model 102002 (14100) Model 102003 (26270) Pre filter is required when the water supply is from a in house un filtered well to retain the warranty. Pre
More informationPLAQUE MFM0680 UNDERWATER LIGHT. Operating Instructions
PLAQUE MFM0680 UNDERWATER LIGHT Operating Instructions CONTENTS Preface... 3 Features... 3 Precautions... 3 Controls and Connectors... 4 Underwater Light PLAQUE MFM0680... 4 Power Supply Unit MPS021000
More informationRK LEL Sample Draw Aspirator Adapter Operator s Manual
30-0951RK LEL Sample Draw Aspirator Adapter Operator s Manual Part Number: 71-0017RK Revision: A Released: 6/2/10 www.rkiinstruments.com Product Warranty RKI Instruments, Inc. warrants gas alarm equipment
More informationINSTALLATION INSTRUCTIONS AT-SERIES ANCHOR ASSEMBLY PART NUMBER: F-04CAJP 450 LB. [204kg] MAXIMUM CAPACITY (PRO POOL LIFT)
INSTALLATION INSTRUCTIONS AT-SERIES ANCHOR ASSEMBLY PART NUMBER: F-04CAJP 450 LB. [204kg] MAXIMUM CAPACITY (PRO POOL LIFT) - WARNING- IMPORTANT SAFETY INSTRUCTIONS 1. READ AND FOLLOW ALL INSTRUCTIONS.
More informationBGI, INC. WALTHAM, MA 02451
BGI, INC. WALTHAM, MA 02451 JANUARY, 2002 58 Guinan Street Waltham, MA 02451 Tel: 781-891-9380 Fax: 781-891-8151 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
More informationCOMPACT TRIPLE WALL OUTLET STATION MODEL INSTALLATION AND OPERATING INSTRUCTIONS
COMPACT TRIPLE WALL OUTLET STATION MODEL 6255-1 INSTALLATION AND OPERATING INSTRUCTIONS To assure safe operation and conformation to local fire codes, all Porter Outlet Stations are designed to be used
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationSPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1.
2 GALLON TWIN STACK AIR COMPRESSOR Model: 9526 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or
More informationInstallation Operating Instructions for Simple Duplex Manual Manifolds PX-TSD Series
Introduction Powerex manifolds are cleaned, tested and prepared for the indicated gas service and are built in accordance with the Compressed Gas Association guidelines. The manifold consists of a regulator
More informationTriple Tine Mechanical Grapple
Attachment Solutions Triple Tine Mechanical Grapple Operators Manual KENCO Mechanical Grapple Operation Manual 1 TABLE OF CONTENTS 170 State Route 271 Section I. General Information.... 3 Section II. Safety...
More informationE8AA. Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications. Pressure Sensor (Stainless Steel Diaphragm)
Pressure Sensor (Stainless Steel Diaphragm) CSM DS_E_3_1 Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications Incorporates double diaphragms consisting of SUS316L stainless
More informationS&S. Installation Instructions: S&S Stealth Air Cleaner Kit for Harley-Davidison Models With Stock Cable Operated Delphi EFI
Instruction 510-0388 01-11-16 Version 1 Copyright 2016 by S&S Cycle, Inc. All rights reserved. Printed in the U.S.A. S&S Cycle, Inc. 14025 Cty Hwy G PO Box 215 Viola, Wisconsin 54664 Phone: 608-627-1497
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationSIX R (P ) AND SEVEN R (P ) POSITION CYLINDERS Service Information
SIX R431006322 (P -063892-00001) AND SEVEN R431006321 (P -063981--00002) POSITION CYLINDERS Service Information The six and seven position cylinders are medium duty pneumatic positioning devices that operate
More informationModel PSI Compressor with 3-Gallon Air Tank 12VDC
Model 6350 150 PSI Compressor with 3-Gallon Air Tank 12VDC IMPORTANT: It is essential that you and any other operator of this product read and understandd the contents of this manual before installing
More informationE2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information
Liquid Level EK-L CSM_EK-L_DS_E 3 Liquid Level That Is Unaffected by the Color of the or Liquid Mount to bypass pipes. Fit a wide range of pipe diameters: 8 to mm or to mm Built-in Amplifiers to save space.
More informationJ Air and Water Kit Instructions Part# 02584
J Air and Water Kit Instructions Part# 02584 Unpacking Please open and inspect your package upon receipt. Your package was packed with great care and all the necessary packing materials to arrive to you
More informationaccidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS
18 GAUGE 1-1/4 INCH BRAD NAILER Model: 7611 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
More informationHAYWARD FLOW CONTROL Series PBV Back Pressure Valve and Series RPV Pressure Relief Valve INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS
HAYWARD FLOW CONTROL Series PBV Back Pressure Valve and Series RPV Pressure Relief Valve INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS Page 1 of 20 Page 2 of 20 TABLE OF CONTENTS Safety Warnings
More informationINSTALLATION. and INSTRUCTION MANUAL. for QUALITY AIR BREATHING SYSTEMS. Model 50-P-Mini Portable Systems Outfitted with ABM-725 Monitor
INSTALLATION and INSTRUCTION MANUAL for QUALITY AIR BREATHING SYSTEMS Model 50-P-Mini Portable Systems Outfitted with ABM-725 Monitor M A R T E C H S E R V I C E S C O M P A N Y P.O. Box 7079 OFFICE: (507)
More informationCocoa Patio Pond with Lit Spillway
Cocoa Patio Pond with Lit Spillway REMINDER CALL 1-888-755-5641 BEFORE RETURNING TO STORE. PACKAGE CONTENTS ITEM # GQSPPB/GQSPPW Questions, problems, missing parts? Before returning to your retailer, call
More informationBollard Post, Model R-8902
ollard Post, Model R-80 Removable Receiver with Lid (for detail, see sheet of ) Removable Receiver with hain (for detail, see sheet of ) Fixed Embedded Mount (for detail, see sheet of ) Flanged Surface
More informationProduct Specifications Specialty Junction Boxes
NOVA Energy & Automation Product Specifications Specialty Junction Boxes Model JB 03 January 2012 Product Description 1. Specialty Junction Boxes Nova Junction Boxes are custom manufactured by size, material,
More informationModel No Product Name Handpiece Only Complete System
Ney QC 700 E 30,000 RPM IECE 30,000 R N HANDPIE IVEN HA R DRIV AIR D Owner & Operator's Manual Model No Product Name 7201326 Handpiece Only 7201325 Complete System Description Page Safety... 2 Setup...
More informationRK-IR Sample Draw Aspirator Adapter Operator s Manual
30-0951RK-IR Sample Draw Aspirator Adapter Operator s Manual Part Number: 71-0018RK Revision: A Released: 6/2/10 www.rkiinstruments.com Product Warranty RKI Instruments, Inc. warrants gas alarm equipment
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More informationCHEMICAL INDUCTION KIT (Pt.No Issue 6, October 2015)
CHEMICAL INDUCTION KIT (Pt.No.2400-0740 Issue 6, October 2015) DESCRIPTION The C-Dax Chemical Induction Kit is an accessory kit for the GoldLine range of three point linkage sprayers. The system operates
More informationB36 R, N, & M High Pressure Service Regulator
B36 R, N, & M High Pressure Service Regulator The B36 is a pounds to pounds reducing regulator for inlet pressures up to 175 PSIG and outlet pressures from 1 to 60 PSIG. Designed for use where two stage
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationHydraulic Live Swivels
Switch Your Swivel! Hydraulic Live Swivels Inline & 90 Swivels 304 & 440c Stainless Steel Heavy Duty Ball Bearing, Rebuildable Design Super Swivels was established in 1986. We manufacture heavy-duty, leak
More informationDISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE
INTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES DISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE OPERATION OF SEATPOST GIANT LIMITED WARRANTY 1 INTRODUCTION Congratulations
More informationIntroduction. P r otective Seals Panel seal for One Hole Mounting (OHM) O-Ring seals for panel mounting Switch boots
SECTION F Introduction ACCESSORIES Switch Guar d s Prevent accidental operation of switches Switch operation limited to selected functions Adaptable to one, two and four pole config u r a t i o n s One
More informationYoke Block Instruction Manual
Yoke Block Instruction Manual ! WARNING IMPORTANT: READ MANUAL COMPLETELY BEFORE OPERATING THIS DEVICE This manual contains instructions on periodically required checks to be performed by the user. These
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationD. ACCESSORIES ADAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANDLES & LIFT CORDS GALVANIC PROTECTION KITS MUSHROOM STRAINER
. ACCESSORIES AAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANLES & LIFT CORS GALVANIC PROTECTION KITS MUSHROOM STRAINER SLUGE STRAINERS NEMA 4 WATERTIGHT CONTROL & UAL LEVEL CONTROL (Replaces
More informationRADROVER REAR RACK INSTALLATION MANUAL
RADROVER REAR RACK INSTALLATION MANUAL WWW.RADPOWERBIKES.COM We are here to help! Please contact us at SUPPORT@RADPOWERBIKES.COM or 1-800-939-0310 if you have questions. REV022216 Welcome Thanks you for
More informationSASK-A-POLE OWNERS AND USERS MANUAL
SASK-A-POLE OWNERS AND USERS MANUAL GENERAL INFORMATION The Saskatchewan Abilities Council s Sask-a-Pole accessibility and transfer aid is designed to help provide safe and easy access to chairs, beds,
More informationHalsey Taylor Owners Manual 4410 Freeze Resistant Tubular Fountain STOP!
Halsey Taylor Owners Manual 4410 Freeze Resistant Tubular Fountain STOP! PLEASE READ THE FOLLOWING INFORMATION. ITALLATION ITRUCTIO FOR THE 4410FR FTN. WITH 97243C SINGLE VALVE CONTROL ASSEMBLY ARE LOCATED
More informationUnderground irrigation
Prograers Turbines and Pop-ups Solenoid valves ittings Accessories and Hoses 70 Irrigation located in set areas, and the only time that you need to invest into it, is the time it takes to set it up, then
More informationHORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationIMPORTANT PLEASE READ BEFORE COMMENCING INSTALLATION
IMPORTANT PLEASE READ BEFORE COMMENCING INSTALLATION This Fitting Guide is designed to assist in the Installation of your Reverse Osmosis System. Some of the parts that are supplied with each system may
More informationISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4
Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual
More informationYoke Block Instruction Manual
Yoke Block Instruction Manual ! WARNING IMPORTANT: READ MANUAL COMPLETELY BEFORE OPERATING THIS DEVICE This manual contains instructions on periodically required checks to be performed by the user. These
More informationINSTRUCTION MANUAL. January 23, 2003, Revision 0
INSTRUCTION MANUAL Model 810A In-Vitro Test Apparatus for 310B Muscle Lever January 23, 2003, Revision 0 Copyright 2003 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway S., Unit 4 Aurora,
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationUser Instruction Manual
User Instruction Manual 4500 psi Air Compressor Ver 2, 1.18 Contents Parts Included...3 Assembly Instructions...3-5 Operation Instructions...6-7 Oil Change Intervals...8 Air Filter Replacement...9 Setting
More informationModel B-1 Pipe Line Strainer 3, 4, 6 & 8 Inch (DN80, DN100, DN150 & DN200) 175 psi (12,1 bar) General Description. Technical Data
Technical Services: Tel: (800) 381-312 / Fax: (800) 71-5500 Customer Service/Sales: Tel: (215) 362-0700 / (800) 523-6512 Fax: (215) 362-5385 Model B-1 Pipe Line Strainer 3,, 6 & 8 Inch (DN80, DN100, DN150
More informationINSTRUCTIONS PARTS LIST
3066V-E INSTRUCTIONS PARTS LIST INSTRUCTIONS! This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. AQ Poppet Color Valve (3066-41-00A) 304 Stainless Steel Body Autoquip,
More informationHP-104 & HP-106 Tapping Machine OPERATIONS MANUAL
30230 Los Alamos Rd. Murrieta, CA 92563 800-279-5659 FAX 951-926-2334 TappingMachines.com HP-104 & HP-106 Tapping Machine OPERATIONS MANUAL & OPERATING INSTRUCTIONS WARNING READ: Before using this product,
More informationINSTRUCTION MANUAL GAS TRAK
INSTRUCTION MANUAL GAS TRAK 166 Keystone Drive Montgomeryville, PA 18936 Telephone: 215-641-2700 Fax: 215-641-2714 INT-0234 rev A1 TABLE OF CONTENTS SERVICE 3 LIMITED WARRANTY 3-4 USER RESPONSIBILITY 4-5
More informationPART 3 HULL INTEGRITY AND ARRANGEMENT
PART 3 HULL INTEGRITY AND ARRANGEMENT PART 3 HULL INTEGRITY AND ARRANGEMENT SECTION SUBJECT 3.1 General 3.2 Doors, hatchways and covers 3.3 Air pipes 3.4 Ventilators 3.5 Side scuttles (portholes) and
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSURE PUMP To minimize vibration, it is best to build brackets on the motor itself, similar to alternator brackets. Use cardboard to construct a pattern first before making
More informationOperating Manual. Models MP-23ENBC, MP-23LPANB, MP-23EHNBC, MP-2300HNB
Models MP-23ENBC, MP-23LPANB, MP-23EHNBC, MP-2300HNB Manual No. AIRCRT22 (Rev 1 July 2007) Operating Manual AIR SYSTEMS INTERNATIONAL, INC. 829 Juniper Crescent, Chesapeake, Va., 23320 Telephone (757)
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationInstallation Instructions
Installation Instructions COLONY SOFT 7.0 Centerset Lavatory Faucet 7.0 with Speed Connect Drain Congratulations on purchasing your American Standard faucet with the Speed Connect drain, a features found
More informationPDS Control 4 and 8 Station Pneumatic Drinking System Installation and Operators Manual
Pneumatic Drinking System Installation and Operators Manual January 2015 Limited Warranty Limited Warranty Chore-Time Group, a division of CTB, Inc. ( Chore-Time ) warrants new CHORE-TIME Cage and Cage
More informationMANUAL: Jumbo Siamese and Jumbo Wye
TASK FORCE TIPS FIRE FIGHTING EQUIPMENT MANUAL: Jumbo Siamese and Jumbo Wye INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Read instruction manual before use. Operation of this device without understanding
More informationProtocol Switchover Station
ADI 3215-B Certified ISO 9001 Protocol Switchover Station INSTALLATION AND OPERATION INSTRUCTIONS Before Installing or Operating, Read and Comply with These Instructions Controls Corporation of America
More informationCommon Components for: (Procenter / Elevance / Elevance Continental-Style / International (Whip) Delivery Systems)
Common Components for: (Procenter / Elevance / Elevance Continental-Style / International (Whip) Delivery Systems) Connectors & Plugs Umbilicals Common Tubing Handpiece Tubing Index for Procenter Units
More informationPage 1. Single Scull Car Rack Assembly and User s Manual " "
Page 1 Single Scull Car Rack Assembly and User s Manual Page 2 Items in the box: (2) V cradles (2) 4 rails (1) 1 3/4 X 18 rail coupler (4) 1/4-20 X 4 1/2 bolts (2) 1/4-20 X 2 1/2 bolts (12) 1/4 flat washers
More information444C DUAL PERFORMANCE VALUE PACK
(Chrome) PART NO. 44432 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS MANUAL
More information