Bollard Post, Model R-8902
|
|
- Ethelbert Hudson
- 6 years ago
- Views:
Transcription
1 ollard Post, Model R-80 Removable Receiver with Lid (for detail, see sheet of ) Removable Receiver with hain (for detail, see sheet of ) Fixed Embedded Mount (for detail, see sheet of ) Flanged Surface Mount (for detail, see sheet 5 of ) Fold own Mount (for detail, see sheet 6 of ) General escription: The R-80 ollard features a clean, making it suitable for any site location. R-80 bollards are made from high-quality 6-grade stainless steel to Height: 6" ( bove ) ase iameter: /8" Weight: lbs ( ollard Post Full Length ) Material: 6 Satin Surface Finish uffed No. 6 Polyester Powder oated ( Optional ) 5 vailable Mounting Options 5/6" hain ccessories Installation Sample (for detail, see sheet of ) Optional hain ccessories vailable OPYRIGHT RESERVE hain Eye /8" (Powder oated) Quick Link onnector (Powder oated) ollard hain 5/6" (Powder oated) THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. Unit 0, Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard Post, Model R-80 WG NO R-80 SHEET OF
2 ollard Post, Model R-80 General escription: The R-80 ollard features a clean, making it suitable for any site location. R-80 bollards are made from high-quality 6-grade stainless steel to 6 Height: 6" ( bove ) ase iameter: /8" /8 /8 Wall New oncrete Weight: lbs ( ollard Post Full Length ) Material: 6 8 5/8 rain Rock Satin Surface Finish uffed No. 6 Polyester Powder oated ( Optional ) 8" Min. 0" Min. SETION - * If local frost line exceeds " deep, provide adequate drainage by piping through concrete, connect to drain rock layer underneath Removable Receiver with Lid (For important detail regarding installation with OPTIONL bollard chain accessories, refer to sheet of ) Removable Receiver with Lid (see sheet of ) Removable Receiver with hain (see sheet of ) (see sheet of ) Fold own Mount Optional hain ccessory ollard post is provided as shown, with material detailed in legend below. oncrete, foundation and/or installation ordered separately or provided by others. This drawing is not drawn to scale. imensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension is critical to your OPYRIGHT RESERVE PRT NUMER R80 Removable R80R Receiver Padlock (Optional) PRTS LIST ESRIPTION ollard R80 Removable ssembly R80R Receiver ssembly w/ Lid Optional Padlock (rass or ) MTERIL 6 6 hoice of rass or THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. lbs 5 lbs 5/8 lbs Unit 0, Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard Post, Model R-80 WG NO R-80 SHEET OF
3 ollard Post, Model R-80 General escription: The R-80 ollard features a clean, making it suitable for any site location. R-80 bollards are made from high-quality 6-grade stainless steel to 6 Height: 6" ( bove ) ase iameter: /8" /8 /8 Wall New oncrete Weight: lbs ( ollard Post Full Length ) Material: 6 rain Rock 5 / Satin Surface Finish uffed No. 6 Polyester Powder oated ( Optional ) 8" Min. 0" Min. SETION - * If local frost line exceeds " deep, provide adequate drainage by piping through concrete, connect to drain rock layer underneath Removable Receiver with hain (For important detail regarding installation with OPTIONL bollard chain accessories, refer to sheet of ) (see sheet of ) Removable Receiver with hain (see sheet of ) (see sheet of ) Fold own Mount Optional hain ccessory ollard post is provided as shown, with material detailed in legend below. oncrete, foundation and/or installation ordered separately or provided by others. This drawing is not drawn to scale. imensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension is critical to your OPYRIGHT RESERVE PRT NUMER R80 Removable R80R Receiver Padlock (Optional) R80R Receiver over (Optional) PRTS LIST ESRIPTION ollard R80 Removable ssembly R80R Receiver ssembly Optional Padlock (rass or ) Optional R80R Receiver over MTERIL 6 6 hoice of rass or 6 THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. lbs lbs 5/8 lbs lbs Unit 0, Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard Post, Model R-80 WG NO R-80 SHEET OF
4 ollard Post, Model R-80 General escription: The R-80 ollard features a clean, making it suitable for any site location. R-80 bollards are made from high-quality 6-grade stainless steel to 6 Height: 6" ( bove ) ase iameter: /8" /8 Weight: lbs ( ollard Post Full Length ) /8 Wall New oncrete Material: 6 Satin Surface Finish uffed No. 6 Polyester Powder oated ( Optional ) " Min. 0" Min. SETION - (see sheet of ) Removable Receiver with hain (see sheet of ) Fixed Embedded Mount (see sheet of ) Fold own Mount Optional hain ccessory Fixed Installation in New oncrete ollard post is provided as shown, with material detailed in legend below. oncrete, foundation and/or installation ordered separately or provided by others. This drawing is not drawn to scale. imensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension is critical to your OPYRIGHT RESERVE PRT NUMER R80 Fixed ollard Polyethylene Plug /" Steel Rebar PRTS LIST ESRIPTION R80 Fixed ollard ody Polyethylene Plug /" Steel Rebar 0 mm x " THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. MTERIL 6 Polyethylene Plastic Steel Epoxy oated lbs /8 lbs Unit 0, Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard Post, Model R-80 WG NO R-80 SHEET OF
5 ollard Post, Model R-80 / General escription: 6 The R-80 ollard features a clean, making it suitable for any site location. R-80 bollards are made from high-quality 6-grade stainless steel to Height: 6" ( bove ) ase iameter: /8" Weight: lbs ( ollard Post Full Length ) 6 Material: 6 /8 oncrete Pavement Satin Surface Finish uffed No. 6 Polyester Powder oated ( Optional ) /8 Wall / /8 SETION - Flanged / Surface Mount (see sheet of ) Removable Receiver with hain (see sheet of ) (see sheet of ) Flanged Surface Mount Fold own Mount Optional hain ccessory ollard post is provided as shown, with material detailed in legend below. oncrete, foundation and/or installation ordered separately or provided by others. This drawing is not drawn to scale. imensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension is critical to your OPYRIGHT RESERVE PRT NUMER R80 Flanged ollard utton Head olt /" x /" Washer /" rop-in oncrete Insert /" PRTS LIST ESRIPTION R80 Flanged ollard ody Hexagon Socket utton Head ap olt /" x /" - requires 5/6" hex key Washer /" O /" Thick.05" rop-in oncrete Insert /" - requires 5/8" x " hole (dia. x depth) MTERIL 6 Steel Plated THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. lbs /8 lbs /8 lbs Unit 0, Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard Post, Model R-80 WG NO R-80 SHEET 5 OF
6 ollard Post, Model R-80 General escription: The R-80 ollard features a clean, making it suitable for any site location. R-80 bollards are made from high-quality 6-grade stainless steel to Height: 6" ( bove ) ase iameter: /8" 5 Weight: lbs ( ollard Post Full Length ) Material: 6 6 /8 /8 Wall 8 6 Satin Surface Finish uffed No. 6 Polyester Powder oated ( Optional ) oncrete Pavement /8 SETION - Fold own Mount pprox. Ground learance 5 / at Fold own Position (see sheet of ) Removable Receiver with hain (see sheet of ) (see sheet of ) Fold own Mount Optional hain ccessory ollard post is provided as shown, with material detailed in legend below. oncrete, foundation and/or installation ordered separately or provided by others. This drawing is not drawn to scale. imensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension is critical to your PRTS LIST PRT NUMER ESRIPTION MTERIL R80 Fold own ollard R80 Fold own ollard ssembly 6 R50 Fold own ase R50 Fold own ase ssembly Steel HG utton Head olt /8" x " Hexagon Socket utton Head ap olt /8" x " - requires /" hex key O-Ring /8" Nitrile Rubber O-Ring /8" Nitrile Rubber Hex Nut Nylon Lock /8" Hex Nut Nylon Lock /8" - requires /6" wrench Steel Plated Nylon Lock utton Head olt /" x /" Hexagon Socket utton Head ap olt /" x /" - requires 5/6" hex key Washer /" Washer /" O /" Thick.05" rop-in oncrete Insert /" rop-in oncrete Insert /" - requires 5/8" x " hole (dia. x depth) Steel Plated Padlock (Optional) Optional Padlock (rass or ) hoice of rass or OPYRIGHT RESERVE THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. 8 lbs 5 lbs /8 lbs /8 lbs 5/8 lbs Unit 0, Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard Post, Model R-80 WG NO R-80 SHEET 6 OF
7 ollard Post, Model R-80 General escription: The R-80 ollard features a clean, making it suitable for any site location. R-80 bollards are made from high-quality 6-grade stainless steel to Height: 6" ( bove ) ase iameter: /8" Weight: lbs ( ollard Post Full Length ) Material: 6 Satin Surface Finish uffed No. 6 Polyester Powder oated ( Optional ) ontractor/installor lert: Please give consideration to the location of the chain eye and the padlock pin when installing removable bollard receiver. It is important that the removable bollard receiver padlock pin is oriented in the same direction as the chain is intended to flow. (see sheet of ) Removable Receiver with hain (see sheet of ) (see sheet of ) Fold own Mount Optional hain ccessory Optional hain ccessories Installation etails OPYRIGHT RESERVE PRTS LIST PRT NUMER ESRIPTION MTERIL hain Eye /8" (Optional) Optional hain Eye /8" Steel Powder oated Quick Link onnector (Optional) Optional Quick Link onnector Steel Powder oated hain 5/6" (Optional) Optional hain 5/6" (Sold by Length) Steel Powder oated Padlock (Optional) Optional Padlock (rass or ) hoice of rass or THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. Unit 0, Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard Post, Model R-80 WG NO R-80 SHEET OF
RegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
More informationPump Assembly. 25 Ton Jack. Air Kit. Emerson PN. Hyd Kit. Emerson PN. Air Kit ITEM NO.
2 4 ITM NO. ir Hyd SRIPTION QTY. 2-0P Pump ody 2 2-02P Piston Spring 2-0P Piston ssembly 4 2-04P Piston O-Ring 2-0P ir Piston Rod O-Ring 6 2-06P ir Motor lock 7 2-07P ir Motor lock O-Ring 8 2-08P ir Motor
More informationACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series
M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited
More informationTechnical Service Manual
SINCE 1925 RELIANCE FOUNDRY CO LTD. Series R-8400 Retractable Bollards Technical Service Manual Reliance Foundry Co Ltd. 6450 148 Street Suite 207 Surrey, BC V3S 7G7 E-Mail info@reliance-foundry.com Phone
More informationReservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
More informationPlok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
More informationMUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
More informationAvailable Sizes (Both width and height are available in the 10mm unit.) Pull Cord Type (with limit stopper) 300~2000mm 400~2000mm 400~2000mm 6m 2
ROLL SRN L R ROLL SRN L R STNR TYP vailable Sizes (oth width and height are available in the 10mm unit.) Method Max. rea Ratio of : Pull ord Type Pull ord Type (with limit stopper) 300~00mm 400~00mm 400~00mm
More informationWELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
More informationINSTALLATION INSTRUCTIONS: SCTB1600
INSTALLATION INSTRUCTIONS: SCTB1600 DESCRIPTION: BOLLARD, 1600 DWG: INSTALL_SCTB1600 REV: M01 BASE TYPE B1 DIRECT BURIAL - PG. 6: BOLLARD IS PERMANENT, IT IS DIRECTLY BURIED INTO CONCRETE BASE TYPE B2
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationCable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into
More informationSwage Socket (open)...86 Swage Button...87 Swage Socket (closed)...87 Swaging Sleeve for Flemish Eye...88 Mid Grip Clips...89 Wire Rope Clips...
Swage Socket (open).........................86 Swage utton...............................87 Swage Socket (closed).......................87 Swaging Sleeve for lemish ye................88 Mid Grip lips..............................89
More informationCA14 SG Iron Air and Gas Trap ½" and ¾" (Screwed)
ert. No. LRQ 9638 ISO 91 14 SG Iron ir and Gas Trap ½" and ¾" (Screwed) TI-P148-1 ST Issue 6 escription The 14 is a range of float type automatic liquid drainers for air and gas systems. The body and cover
More informationSeries variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )
Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm
More informationSCOUT DECK ANCHOR 3 1/4" BONDING SCREW
SCOUT DECK ANCHOR 16" 16" 1" X 4" ANCHOR BOLT (4) 10" 3 1/8" 5" 6" MIN COPPER WIRE TO ATTACH TO BONDING GRID 3 1/4" BONDING SCREW CONCRETE DECK SPECIFICATIONS: THE AQUA CREEK PRODUCTS' SCOUT DECK ANCHOR
More informationMAKE BOLLARD IMPACT RESISTANT PROTECT FOUNDATIONS RE-USE BOLLARD
\\ PROTECT FOUNDATIONS In-ground or surface mount Impact Recovery System protects foundations from damage when bollards are impacted, need replacing or upgrading. Surface mount version uses Impact resistant
More informationMUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationMUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More information20 to 280l/min 21MPa. econnecting a remote control valve to the vent port allows remote control of adjustment pressure.
Pressure Reducing (and heck) Valve eatures PRSSUR RU ( ) VV to 8l/min Pa -***-*- R -***-*- Specifications qthis valve is used when part of the circuit uses pressure that is lower than the main circuit.
More informationINSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
More informationISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4
Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual
More informationENGINE/ PUMP ADAPTERS
ENGINE/ PUMP PTERS Hayes Manufacturing, Inc. Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 TRNSMISSION PROUTS Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 Table Of ontents Engine/ Mount
More informationHolder Assembly. Assembly. 1 MCP bottom holder. 2 MCP top holder 3 Clip. 9.5x9.5x0.4 1 lbf. Weight: 0.32 lbs. Allen Zhao
Holder ssembly ssembly 9.5x9.5x0. lbf MP bottom holder Weight: 0. lbs MP top holder lip llen Zhao Sheet Metal inder top spring clamp spacer inding for mm edge llen Zhao FE of MP Load:.: 5G Max on the plane
More informationINSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN
INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN Important: Read all instructions and refer to local codes prior to installation. l Local soil conditions may require more gravel for drainage. l
More informationInductive Proximity Sensors Global Plus Prox
July 2005 PG.05..T. -35 Global Plus ontents Overview................... -35 Model Selection, Sensors...... - Model Selection, ompatible onnector ables........... -37 Model Selection, ccessories... -37
More informationRECTANGULAR CONNECTORS
RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With
More informationASTM A182 STAINLESS HIGH PRESSURE FITTINGS INDEX
STM 182 STINLESS HIH PRESSURE FITTINS INEX 90 ELOW / ROSS / TEE / 45 ELOW - SOKET 46 OUPLIN / HLF OUPLIN / P - SOKET 47 90 ELOW / ROSS / TEE / 45 ELOW - THREE 48 OUPLIN / HLF OUPLIN / P - THREE 49 REUIN
More informationTHOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
More informationMANUAL ROLLER SHADE MANUAL ROLLER SHADES SHADE SIZES & WEIGHTS: BRACKET PROJECTIONS:
MNUL ROLLER SHDE MNUL ROLLER SHDES (R, R & G0) (R, R & G0) STNDRD OMPONENTS:. Fabric. Roller Tube Dimensions: R.............. /" Diameter R............ /" Diameter R............... " Diameter G0...........
More informationCB 350. Spare parts list. Hydraulic concrete buster. CB 350 s/n DEQ Construction Tools GmbH No
CB 350 Spare parts list Hydraulic concrete buster CB 350 s/n DEQ179000-2018 Construction Tools GmbH No. 3390803501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationModel AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K
Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424
More informationPneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options
Section 2 Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options Metric Series Product Numbering System...............FIT-2-2 Metric Series Shapes
More informationSaf-T Vent EZ Seal Plus
Technical and Dimensional Data Saf-T Vent EZ Seal Plus Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange
More informationAnchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
More informationCAUTION - PUT SAFETY FIRST
www.shoremaster.com DVS Vertical Lift (Double V Side): Frame ssembly Instructions. Models: 500DVS - 0ft Wide, 5000lb Capacity - Part #: 0079 600DVS - 0ft Wide, 6000lb Capacity - Part #: 0033.. 3.. 5. CUTION
More informationRP series Rotor Pumps
ontact etails RP series Rotor Pumps Nomenclature Features Low noise Substantial reduction of the operation noise, by to db (comparison with aikin products), and improved sound quality are achieved by adopting
More informationbike parking The modern commuter has placed new demands on streetscapes. Cycling has become a major form of traffic and it continues to grow. At Reliance Foundry, we ve recognized that it is necessary
More information13 - Fishing Accessories - Bait Stations
13 - Fishing ccessories - Bait Stations Deluxe Jet Ski Bait Station This universal mount bait station suits all models of jet skis. 316 grade stainless steel frame with 3 x rod holders, handles & mount
More informationFNFB-30 (30 FT FIELDPRO FOOTBALL BACKSTOP SYSTEM) Installation Instructions
FNFB-30 (30 FT FIELDPRO FOOTBALL BACKSTOP SYSTEM) Installation Instructions Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.com Rev: - Page
More informationAir Intake Snorkel Kit
SSV KIT - Air Intake Snorkel Kit Part number (SKU) : 715003733 Product: Side-by-side Project no: 487802499 Instruction Sheet P/N: 487802499 Revision no: Revision date: Item covered: Air Intake Snorkel
More informationLiquid Tight Strain Relief Fittings, Accessories & Conduit System
Liquid Tight Strain Relief Fittings, ccessories & Our Service makes the difference! 20 years of excellence! Table of Contents Nylon Strain Relief Fittings Page escription 3 Nylon Fittings - Introduction
More information300lb MALLEABLE FITTINGS
NIPPLES & FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS ISO 9002 - CERTIFICTE OF QULITY - UL/ LISTED ND PPROVED T 300 PSI Our quality fittings are made with care and attention to detail.
More informationAN Wireless Tower Assembly Instructions
N Wireless Tower ssembly Instructions RED THOROUGHLY EFORE SSEMLY ND ERETION Thank you for your purchase of an N Wireless Self Supporting Tower. N Wireless Towers are designed and fabricated to be high-strength,
More informationRECTANGULAR CONNECTORS
RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With
More informationHardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
More informationRB 4000 Commercial & Industrial Regulator
R 4000 ommercial & Industrial Regulator The R 4000 pressure regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants and all installations where accurate
More informationWaveguide and Flange Data
Waveguide and lange ata requency Range (hz) ritish W Waveguide esignation I R I WR Internal imensions (mm) lann Standard flange details Please see page 110-115 for outline dimensions lange esignation escription
More informationExcess Flow Valves. General Information. How They Work. An Explanation and Warning. Proper Installation
xcess low Valves General Information RegO xcess low Valves have been designed, developed, and manufactured for a wide variety of industry needs for more than three decades. Throughout the years, those
More informationShift Chain. ST - N : Normal type. ST - E : Enclosed type. ST - S : Skid type ST044 E ST055 E ST072E ST095E ST120E ST150E
Shift hain ST - N : Normal type ST - : nclosed type ST - S : Skid type ST044 N ST0 N ST02N ST09N ST0N ST0N -9 - - - -1-19 ST044 ST0 ST02 ST09 ST0 ST0-2 -29-1 - - - ST044 S -4-1 www.cpsystem.co.kr ST -
More informationFlagpole Selection Guide
Selection Guide Selecting the right pole for your project To chose the right pole you should consider both flagpole Style and Height. The common styles are outlined on this page for easy comparison. The
More informationKent Coffin Bollard KCB-KDTB-101/3
Coffin Bollard Kent Coffin Bollard Specify: Kent Coffin Bollard ; 900mm Overall Height; 3mm thick wall; Grade 316L Stainless Steel; Bright Satin finish; 250mm deep storage chamber; B125 loading lid. The
More informationBARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S
ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE
More informationInstalling a Christie One Mount/Christie One Mount Plus
Installing a Christie One Mount/Christie One Mount Plus This document provides instructions for installing the Christie One Mount or Christie One Mount Plus and optional accessories to mount Christie projectors
More informationPRODUCT CARD WALL MOUNTED SIDE FOLDED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,2 TO 2,45 M
PRODUCT CARD WALL MOUNTED SIDE FOLDED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,2 TO 2,45 M I. List of components... 2 II. Complimentary products... 2 III. Product description... 3 IV. Product Purpose...
More informationBrass Tubular. P-Traps. Item # Description Qty
B r a s s T u b u l a r P-Traps 1 1-1/4 17 ga CP P-Trap 1B with brass nuts 1D with box flange 1BD with box flange and brass nuts 115 with 15 wall bend 1B15 with 15 wall bend and brass nuts 1D15 with 15
More informationATS430 turbidity sensor Retractable insertion assembly
A MEASUREMENT & ANALYTICS INSTRUCTION ATS430 turbidity sensor Retractable insertion assembly Measurement made easy 1 Introduction This publication details installation procedures for the retractable insertion
More informationDECK FILLS & TANK VENTS
122 K FILLS & TNK VNTS Standard eck Fills construction Flush profile ap retention cable olor coded graphics Pop-out eck Fills construction Flush profile No key needed olor coded graphics ap retention cable
More informationCA44 and CA44S Carbon Steel Air and Gas Traps Flanged DN15 to DN25
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationFilter regulator. Accessory. Description. Symbol. B With bracket With round. Port size. (Without limit indicator) Body size.
eries ow to Order opper, fluorine and silicon-free + Low particle generation il ote 1) ote 2) part no. lean series hread type Rc racket assembly ote ) ote 9) 1.0a 0.2a / -20 49-01 49-2-01 ilter regulator
More informationROLLER SLIDE BALL BEARING
ROLLER SLIDE BALL BEARING ROLLER SLIDE SYSTEM BALL BEARING SLIDE SYSTEM Standard slides and ball bearing slides offering a variety of top quality movement systems. www.grassusa.com Roller slides: Tried-and-tested
More informationPneumatic retractable fitting for simple commercially available control units or process applications
Pneumatic Retractable Fittings hem Energy Pharm Food Water SensoGate W 3 Pneumatic retractable fitting for simple commercially available control units or process applications Variable and reasonably priced
More informationIntroduction. P r otective Seals Panel seal for One Hole Mounting (OHM) O-Ring seals for panel mounting Switch boots
SECTION F Introduction ACCESSORIES Switch Guar d s Prevent accidental operation of switches Switch operation limited to selected functions Adaptable to one, two and four pole config u r a t i o n s One
More informationINSTALLATION INSTRUCTIONS FOR ROLLOVER PROTECTION SYSTEM (ROPS)
INSTALLATION INSTRUCTIONS FOR ROLLOVER PROTECTION SYSTEM (ROPS) This manual contains assembly, operating, maintenance and safety instructions for your ROPS. Before Installing the ROPS or operating a machine
More informationStainless Steel Straps
Stainless Steel s Stainless Steel s Nuts Nuts for use with alloy steel s New S SH Nut Code Old S SH escription AN365 self-locking, cadmium-plated steel with non-metallic insert AN363 self-locking high-temperature,
More informationPressure Control (and Check) Valve
Pressure ontrol (and heck) Valve PRSSUR OTRO (A ) VAV 50 to 80l/min 4Pa eatures qthis circuit control valve works as a sequence valve, unloading valve, and counter balance valve. waximum operating pressure
More informationHIGH-PRESSURE RELIEF VALVES H-900HP SERIES
IPRSSUR RLI VLVS 9P SRIS TURS n 9P is available as /P products. n 316St.St. onstruction n Service up to psi n Set Pressure from 5 psig to psig ( 3.5 to 414 bar) n Identifying colored springs for each pressure
More informationWide opening parallel grippers Series CGLN
CATALOGUE > s 202 Wide opening parallel grippers Series CGLN > Grippers Series CGLN Magnetic Sizes: ø 0-6 - 20-25 - 32 mm» High flexibility during mounting» High grip force» Rack and pinion synchronized
More informationParts List Recessed Laboratory Units
Recessed Laboratory Units tem Part Number escription P470-021L FS-Plus Spray ead P450-048 10 ia. Stainless Steel Shower ead P450-062 P450-016 10 ia. Recessed Flanged Stainless Steel Shower ead 8 ia. hrome
More informationFilter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4
eries eries ilter Regulator ilter Regulator with ackflow unction ow to Order lean series opper, fluorine and silicon-free low particle generation ilter regulator 10 03 21 03 q w e r t y "" must always
More informationModel 1800 PFM Series Regulator
Model 800 PFM Series Regulator Model 800 PFM Series Regulator 0 Elster 800 PFM Series Regulator losing Springs For improved lock-up performance Low differential High differential (See losing Spring chart
More informationAIR/OVER HYDRAULIC JACK 20 TON
AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.
More informationTapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
More informationK13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
More informationGRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS
GRAVITY BIKE RACK 94479 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationUSER MANUAL. Beach volleyball posts BEACH CHAMP ID:
USER MANUAL Beach volleyball posts BEACH CHAMP ID: 111203 INDEX USER MANUAL FOR BEACH VOLLEYBALL POSTS BEACH CHAMP General information Overview Overview: Floor mounting options City Beach - for a freestanding
More informationINSTALLATION INSTRUCTIONS. Parts List. Tools Required. Before You Begin. Installation. Customer Information BICYCLE ATTACHMENT JUL.
INSTALLATION INSTRUCTIONS JUL. 2006 Parts List Bicycle attachment Key plates (2) Tools Required Phillips screwdriver Flat-tip screwdriver Before You Begin Customer Information This Bicycle Attachment is
More informationImport Bike Rack OEM INSTALLATION MANUAL
Import ike Rack OEM INSTLLTION MNUL TLE OF ONTENTS System Information 2 Safety Information 2 Resources Required 3 Preparation 3 Under umper ttachment 3 Over umper ttachment 3 Installation 3 Under umper
More informationFILTER REGULATOR. We produce with artistic attitude.
FILTER REGULTOR We produce with artistic attitude. DURY from Germany is expert in fluid control; the products are mainly for control and measurement of various gases, liquid pressure and flow, including
More informationSEries 29 Hydrant valves installation, operation & maintenance manual
Instruction for use Thank you for selecting an AVK product. With correct use, it will give long and reliable service. This manual has been prepared to assist you install, operate and maintain the valve
More informationGP100 SERIES ENDURANCE PLAYGROUND SYSTEMS. Installation and Assembly Instructions. Gared Holdings, LLC 9200 E. 146th St. Noblesville, IN 46060
GP100 SERIES 1 OF 16 401754712 B Table of Contents Section Page No. Introduction 2 Cautions and Warnings 3 Parts Checklist 4 Post & Extension Arm Installation 7 Acrylic, Glass, and Perforated Steel Backboard
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Types A & B
Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More information2.4M Viking Swing Basket Swing
.M Viking Swing Basket Swing PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT 75x75x150 5 to Adult 1.5 Metres Approx 6Kg Approx 198Kg SPECIFICATION Solid steel components to EN 10087:1998
More informationBERMAD Waterworks. Combination Air Valve. Air Valves Series. Typical Applications. Features & Benefits. Additional Features.
BERMA Waterworks Combination Air Valve Model C7 BERMA C7 is a high quality combination air valve for a variety of water networks and operating conditions. It evacuates air during pipeline filling, allows
More informationApex 3 Theory of Operation
Apex 3 INSTALLATION & OVERVIEW... 2 Load Height... 2 Approach Angle... 2 Footprint... 3 Protrusion... 3 Mounting the Apex3... 4 General Torque Specs... 5 OPERATION OF BIKE RACK... 6 Loading Bikes... 6
More informationLock-N-Load. Bullet Feeder
Lock-N-Load Bullet Feeder table of contents steps Overview... 2 List of required hand tools... 2 1: Mounting the Bullet Feeder to the Bench... 3 2: Mounting the Bullet Feed Hopper... 4 3: Bullet Feed Hopper
More informationIndia Mark Handpump. Available Models & OperatingData: Materials of Construction: HANDPUMP. Recommended for water level setting depth (meters)
India Mark Handpump Available Models & OperatingData: Pump Model India Mark II India Mark III India Mark II Extra Deep well Afridev Head 12 to 45 m 12 to 33 m 50 to 85 m 45 m Minimum ID of bore (millimeter)
More informationMade in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks:
Submittal Sheet Materials: 2 Schedule 40 Steel Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available Powder Coat Our powder coat finish assures a high level
More informationMICHIGAN DEPARTMENT OF TRANSPORTATION 6" X 8" (NOMINAL POST) 3-1/2" DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE
X (NOMINAL POST) 1-1/ DIA. 2 HOLES X 8" (NOMINAL POST) 3-1/ DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE TO BE OAK, MAPLE OR OTHER APPROVED DENSE HARDWOODS) TO HOLD POST IN A STABLE POSITION AFTER
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More informationOWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL)
OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) Table of Contents ASSEMBLY ASSEMBLY Pistol Bullet Feeder... Page 3 CHANGE-OVERS The Hornady Lock-N-Load Pistol Bullet Feeder is capable of feeding most
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,
More informationMounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type
Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationSECTION 2 RING MOUNT
SECTION 2 RING MOUNT Rotax aircraft engines are manufactured and supported by Rotax GmbH of Austria. Read and understand the Rotax manuals completely before starting with the engine installation, as they
More informationTOYOTA TACOMA 2005 TOW HITCH Preparation. Part Number: PT
Preparation Part Number: PT791 04050 Kit Contents 1 1 Hitch Center Section 2 1 LH Frame bracket 1 RH Frame Bracket 4 2 Auxiliary Bracket Hardware Bag Contents 1 6 Hex Head Bolt, M12 x 1.2 (black) 2 6 Nut,
More informationALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
More information