VCO O-ring Face Se al Fit tings
|
|
|
- Kelly Farmer
- 5 years ago
- Views:
Transcription
1 O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections
2 2 O-ring Face Seal Fittings ontents Features Technical ata Information and imensions Nuts Female lind Glands Union Swagelok Fitting onnector dapter Weld Glands NPT and S/MS onnectors odies Union, ulkhead Union, Reducing Union lbow and Tee lind ody Swagelok Fitting onnector, ulkhead, lbow.. 7 Weld onnectors NPT onnectors and lbow S/MS onnector and lbow Options and ccessories Installation Instructions Features Swagelok O-ring face seal fittings are designed for rapid make-up in pipe, tube, and welded systems. Their unique design allows easy installation where space is limited. No axial clearance is required. Sealing is accomplished with a captive O-ring in the body component. ssemblies can be used from high pressure to critical vacuum, within a wide range of temperatures. O-ring contained completely for maximum efficiency Gland Test ports at two locations for easy leak testing Smooth finish on gland face ensures positive seal Female nut threads silver plated for easy assembly Nut ody Technical ata Materials of onstruction omponent odies, glands, nuts utomatic tube weld fittings O-ring, bodies O-ring, S/MS threads Lubricant O-ring Uniform O-ring Uniform /8 and /4 00 3/8 and 3/ S/MS Thread O-ring Uniform 7/ / / / / Material 36 SS 36L SS Fluorocarbon FKM (70 durometer) Fluorocarbon FKM (90 durometer) Silicone-based s ratings published in this catalog are calculated in accordance with SM 3.3, Process Piping. The listed pressure ratings are based on allowable stress values for temperatures up to 00 F (37 ). To determine pressure ratings in accordance with SM 3., Power Piping, multiply rating by Temperature s Temperature ratings for fittings are determined by the O-ring materials used. Testing Material Temperature F ( ) Fluorocarbon FKM 400 (204) una N 250 (2) PTF 450 (232) Perfluoroelastomer 550 (287) thylene propylene 300 (48) The face seal fitting design has been helium leak tested to a maximum leak rate of std cm 3 /s.
3 Information and imensions imensions are for reference only and are subject to change. The dimension refers to the smallest nominal inside diameter of the part. O-ring Face Seal Fittings 3 Nuts Female /8 and /4 SS /8 and SS /4 SS-2--4 SS-6--4 imensions, (mm) 0.69 (7.5) F /6 3/4 lind /8 and /4 SS-4--4-L 3/8 and SS-8--4-L 3/4 SS-2--4-L SS-6--4-L imensions, in (mm) (.2) 0.56 (4.2) 0.75 (9.) 0.8 F /6 3/4 Glands Union /4 SS-4-W-6-F SS-8-W-6-F imensions, (mm) F.42 (36.).6 (40.9) / Swagelok Fitting onnector /4 /4 SS-4-W /8 SS-8-W SS-8-W /4 3/4 SS-2-W-6-20 SS-6-W-6-60 imensions, (mm) F.74 (44.2).87 (47.5) 2.0 (5.) 2.4 (54.4) 2.45 (62.2) 0.70 (7.8) 0.77 (9.6) 0.76 (9.3) (26.4) 0.94 (23.9) 0.98 (24.9) 0.90 (22.9).23 (3.2) /6 3/ (275) 3 000
4 4 O-ring Face Seal Fittings Glands dapter /4 /4 SS T 3/8 SS T SS T 3/4 3/4 SS T SS T imensions, (mm).3 (33.3).38 (35.).62 (4.).80 (45.7) 2.05 (52.) 0.64 (6.3) 0.70 (7.8).02 (25.9).30 (33.0) 0.27 (6.8) 0.37 (9.3) 0.58 (4.7) (447) (46) (323) Socket Weld /8 /8 SS-2--3 /4 /4 SS /8 3/8 SS-6--3 SS /4 3/4 SS-2--3 SS-6--3 imensions, (mm) 0.77 (9.6) 0.77 (9.6) (23.9) 0.98 (24.9) 0.0 (2.5) 0.3 (7.9) (.2) 0.09 (2.3) 0.92 (23.4).9 (30.2) (06) (468) 8 00 (558) (255) Socket Weld Reducing /4 /8 SS TSW imensions, (mm) 0.77 (9.6) /4 SS TSW (2.5) 0.09 (2.3) 0.29 (7.4) 0.48 (2.2) (868) (737) Male Weld /4 /8 SS MTW 0.77 (9.6) /4 SS MTW.2 (28.4) imensions, (mm) 0.4 (0.4) /4 SS MTW 0.9 (23.) 0.4 (0.4) 3/8 SS MTW 0.84 (2.3) SS MTW.06 (26.9) 0.50 (2.7) 0.06 (.5) 0.2 (3.0) 0.2 (3.0) 0.23 (5.8) 0.33 (8.4) 200 (77) 200 (77) (564) (56)
5 Glands O-ring Face Seal Fittings 5 utomatic Weld /4 /4 36L /8 36L L /4 3/4 36L L-6--3 imensions, (mm).2 (28.4).3 (28.7).4 (29.0).20 (30.5).4 (35.8) 0.78 (9.8) 0.79 (20.0).00 (25.4) 0.02 (0.5) 0.03 (0.76) (.0) (.0) (.0) 0.3 (7.9) 0.65 (6.5) 0.29 (7.4) 0.4 (0.4) 0.55 (4.0).06 (26.9) Wall Thickness (35) 3300 (227) 3500 (24) 2200 (5) 2200 (5) Male NPT onnector G flat NPT /4 /4 SS-4-W--4 3/8 SS-8-W--6 SS-8-W--8 3/4 3/4 SS-2-W--2 SS-6-W--6 imensions, (mm) G.59 (40.4).67 (42.4).87 (47.5) 2.03 (5.6) 2.36 (59.9) /6 3/ (675) 5600 (385) 3900 (268) 2900 (99) Female NPT onnector G flat NPT /4 /4 SS-4-W-7-4 3/8 SS-8-W-7-6 SS-8-W-7-8 3/4 3/4 SS-2-W-7-2 SS-6-W-7-6 imensions, (mm) F G.57 (39.9).73 (43.9).96 (49.8) 2.2 (53.8) 2.29 (58.2) 3/4 /6 7/8 /6 5/6 3/ (454) 5300 (365) 4900 (337) 4000 (275) 3000 Male S/MS onnector G flat Straight Thread /4 7/6-20 SS-4-W--4ST 9/6-8 SS-8-W--6ST 3/4-6 SS-8-W--8ST 3/4 /6-2 SS-2-W--2ST 5/6-2 SS-6-W--6ST imensions, (mm) G.54 (39.).64 (4.7).7 (43.4) 2.07 (52.6) 2.7 (55.) /6 3/ (30) 4500 (30) 3600 (248) 2900 (99)
6 6 O-ring Face Seal Fittings odies Union /4 SS-4--6 imensions, (mm) F.25 (3.8) (985) SS (38.) 00 (764) ulkhead Union /4 SS-4--6 SS-8--6 F.88 (47.8) 2.09 (53.).06 (26.9).9 (30.2) imensions, (mm) Panel Hole rill 3/4 37/64 /6 57/64 Max Panel Thickness 0.36 (9.) (985) 00 (764) Reducing Union /4 SS imensions, (mm) F.43 (36.3) 00 (764) lbow /4 SS-4--9 SS-8--9 imensions, (mm).26 (32.0) (985) 00 (764) 3/4 SS (37.6) (75) SS (39.6) (606) Tee /4 SS-4--T imensions, (mm).92 (48.8) (985) SS-8--T 2.52 (64.0).26 (32.0) 00 (764) 3/4 SS-2--T SS-6--T 2.96 (75.2) 3.2 (79.2).48 (37.6).56 (39.6) (75) (606)
7 odies O-ring Face Seal Fittings 7 lind /4 SS-4---L SS-8---L 3/4 SS-2---L SS-6---L imensions, (mm) 0.77 (9.6) 0.89 (22.6) 0.99 (25.).02 (25.9) F 5/6 Swagelok Fitting onnector /4 /8 SS /4 SS /8 SS SS /4 3/4 SS SS imensions, (mm) F.38 (35.).47 (37.3).65 (4.9).78 (45.2).86 (47.2) 2.06 (52.3) 0.5 (3.0) 0.90 (22.9).23 (3.2) 0.09 (2.3) 5/ (75) (447) (46) (323) Swagelok Fitting ulkhead onnector x /4 /4 SS /8 SS SS /4 3/4 SS SS imensions, (mm) x F 2.0 (53.3) 2.34 (59.4) 2.55 (64.8) 2.86 (72.6) 3.29 (83.6).32 (33.5).45 (36.8).65 (4.9).87 (47.5) 2.26 (57.4) 0.90 (22.9).23 (3.2) Panel Hole rill 29/64 37/64 49/64 5/6 /64 2/64 Max Panel Thickness (.2) 0.50 (2.7) 0.75 (9.) (447) (46) (323) Swagelok Fitting lbow /4 /4 SS /8 SS SS /4 3/4 SS SS imensions, (mm).9 (30.2).39 (35.3) (32.0) (38.).80 (45.7) 2.04 (5.8).48 (37.6).56 (39.6) 0.90 (22.9).0 (27.9).40 (35.6).56 (39.6) 0.90 (22.9).23 (3.2) (447) (46) (323)
8 odies O-ring Face Seal Fittings 8 Socket Weld onnector /8 /8 SS-2-- /4 /4 SS-4-- 3/8 3/8 SS-6-- SS-8-- 3/4 3/4 SS-2-- SS-6-- imensions, (mm) F 0.88 (22.4).09 (27.7).28 (32.5).34 (34.0).50 (38.).72 (43.7) 0.0 (2.5) 0.3 (7.9) (.2) 0.09 (2.3) 0.29 (7.4) 0.73 (8.5) 5/ (23.4).9 (30.2) (868) (468) 8 00 (558) (254) utomatic Weld onnector /4 /4 36L-4-- 3/8 36L L-8-- 3/4 3/4 36L L-6-- imensions, (mm) F Wall.59 (40.4).74 (44.2).75 (44.4).78 (45.2) 2.03 (5.6) 0.78 (9.8) 0.79 (20.0).00 (24.5) 0.02 (0.5) 0.03 (0.8) (.0) (.0) (.0) 0.3 (7.9) 0.65 (6.5) 0.29 (7.4) 0.4 (0.4) 0.55 (4.0) 5/6.06 (26.9) (35) 3300 (227) 3500 (24) 2200 (5) 2200 (5) Male NPT onnector /4 NPT /8 SS /4 SS /8 SS SS /4 3/4 SS SS imensions, (mm) F.6 (29.5).34 (34.0).46 (37.).65 (4.9).75 (44.4).97 (50.0) 5/ (689) (923) (537) (689) (502) (365)
9 9 O-ring Face Seal Fittings odies Female NPT onnector /4 NPT /8 SS /4 SS /8 SS SS /4 3/4 SS SS imensions, (mm) F.25 (3.8).39 (35.3).57 (39.9).77 (45.0).93 (49.0) 2.02 (5.3) 3/4 /6 5/ (578) 6600 (454) 6600 (454) 4900 (337) 4600 (36) 4400 (303) Male NPT lbow /4 NPT /8 SS /4 SS /8 SS SS /4 3/4 SS SS imensions, (mm).05 (26.7).26 (32.0) (32.0) (36.8).67 (42.4).94 (49.3).48 (37.6).56 (39.6) 0.56 (4.2) 0.56 (4.2) 0.75 (9.) 0.75 (9.) 0.94 (23.9) (22.0) (689) (55) (537) (530) (502) (365) Male S/MS onnector /4 Straight Thread 7/6-20 SS-4---4ST 9/6-8 SS-4---6ST 7/6-20 SS-8---4ST 9/6-8 SS-8---6ST 3/4-6 SS-8---8ST 3/4 /6-2 SS-2---2ST 5/6-2 SS-6---6ST imensions, (mm) F.24 (3.5).7 (29.7).36 (34.5).39 (35.3).47 (37.3).73 (43.9).79 (45.5) 0.36 (9.) 0.39 (9.9) 0.36 (9.) 0.39 (9.9) (.2) 0.59 (5.0) 0.59 (5.0) 0.30 (7.6) 0.85 (2.6) /6 3/8 s 4500 (30) 4500 (30) 3600 (248) 2900 (99)
10 odies Male S/MS Positionable lbow U washer Straight Thread /4 7/6-20 SS-4--9P-4ST 9/6-8 SS-8--9P-6ST 3/4-6 SS-8--9P-8ST 3/4 /6-2 SS-2--9P-2ST 5/6-2 SS-6--9P-6ST imensions, (mm) U.9 (30.2).54 (39.) (33.8) (4.9) 2.3 (54.) 2.3 (58.7).53 (38.9).72 (43.7) 0.39 (9.9) (.2) 0.50 (2.7) (7.6) 0.65 (6.5) 4500 (30) 0.79 (20.) (248) (25.7).44 (36.6).73 (43.9) 2900 (99) 2300 (58) Options and ccessories O-rings Perfluoroelastomer, una N, PTF, and ethylene propylene O-rings are available for special applications. ontact your authorized Swagelok sales and service representative for information. Fitting Installation Instructions Finger-tight 2 Warranty Information Swagelok products are backed by The Swagelok Limited Lifetime Warranty. For a copy, visit swagelok.com or contact your authorized Swagelok representative. 45 Safe Product Selection When selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Swagelok, TM Swagelok ompany 2002, 2005 Swagelok ompany Printed in U.S.., MI November 2005, R6 MS-0-28
VCO O-Ring Face Seal Fittings
O-Ring Face Seal Fittings www.swagelok.com O-Ring Face Seal Fittings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 Weld, VR,, Pipe, and Vacuum Fittings ontents Technical
Sample C ylinde rs, Acce ssorie s, and O utage Tube s
www.swagelok.com Sample C ylinde rs, cce ssorie s, and O utage s Features Sizes from 10 to 3785 cm 3 (1 gal) Working pressures up to 5000 psig (344 bar) 304L and 316L stainless steel and alloy 400 2 Sample
Propor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
Flange Adapters. Threadless, weldless transition from flanged piping systems to tubing systems
www.swagelok.com Flange dapters Threadless, weldless transition from flanged piping systems to tubing systems Flange types meet SM, IN, N, and IS standards One-piece integrally machined forged body vailable
Proportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
Tank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
High Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves
High Pressure leed Valves, Gauge Valves and lock & leed Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +9 9 9 9 Fax: +9 9 9 9 FITOK, Inc. North Promenade
Industrial Compression Style Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
Industrial Compression Style Fittings. Compression Fittings Compress-Align Fittings Brass Metric Compression Poly-Tite Fittings Hi-Duty Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
INDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
HEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
COMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an
Plok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
Fittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products MPI Medium Fittings Introduction Hannifin Fittings are engineered and manufactured to provide secure,
Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options
Section 2 Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options Metric Series Product Numbering System...............FIT-2-2 Metric Series Shapes
FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
shutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
Specifications For Threaded and Butt Weld Hammer Unions
.02 Introduction Pacific Hoseflex offers a comprehensive range of standard and sour gas. Each union is thoroughly inspected to ensure long, dependable service in the most extreme conditions. - Three lug
Products Compliant with the Transportable Pressure Equipment Directive (TPED)
Swagelok Products Compliant with the Transportable Pressure Equipment Directive () 1 www.swagelok.com Swagelok Products Compliant with the Transportable Pressure Equipment Directive () Products Double-ended
Cable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into
High-Flow, Manual Gas Pressure Regulators
High-Flow, Manual Gas Pressure Regulators HF Series 1 www.swagelok.com High-Flow, Manual Gas Pressure Regulators HF Series Compact size with flow rates up to 2 std L/min Maximum inlet pressures up to 5
High Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
High Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
Avenger Model 33M Installation & Operation Instructions
Avenger Model 33M Installation & Operation Instructions Manufacturing Contact Information A+ Corporation, LLC Call for expert product application assistance: 41041 Black Bayou Rd. Gonzales, LA 70737 Phone:
Ball Valves Subsea Series
Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand
Go to Table of Contents. Ball and Plug Valves
Ball and Plug s July 2014 Series s Parker series manually, pneumatically and electrically actuated two-way and three-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications
HIGH-PRESSURE RELIEF VALVES
HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range
Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
ALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
COMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications
Clean Gas Filter. SF Series. Cartridge Type/Disposable Type IDFA IDFB IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC SF SFD LLB AD GD SFC10
Clean Gas Filter SF Series Cartridge Type/Disposable Type Disposable type SFC0 Disposable type SFB30 Cartridge type SFA0 SFA20 SFA30 HAA HAW AT IDU FS A B IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC
// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.
Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied
Medium Pressure Valves, Fittings and Tubing Pressures to 22,500 psi
Medium Pressure Valves, ittings and Tubing Pressures to 22,00 psi MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality
Albany Connecticut Vermont Westchester
Natural Gas Sampling Sample Cylinders Grab Sample Panels Natural Gas field sampling is performed to determine gas composition, specific gravity, hydrocarbon dew point and natural gas value. Accurate gas
Intru-lok Flareless Bite Type Fittings
Intru-lok Flareless Bite Type Fittings 4300 atalog Flareless Bite Type Fittings Nuts, Ferrules, Inserts BIP Knurled Nut BI2 Nut BTI2 Nut and Ferrule TI2 Ferrule TIP Expander / Insert T23UI Insert HBI2
RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.
RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
RS(H)20, 25 USER MANUAL
RS(H)20, 25 USER MANUAL Read the complete manual before installing and using the regulator. WARNING Before removing a regulator from the system for service, you must depressurize system purge the system
RHPS Series RD(H)F40 User Manual. Read the complete manual before installing and using the regulator.
RHPS Series RD(H)F40 User Manual Read the complete manual before installing and using the regulator. 2 WARNING Before removing a regulator from the system for service, you must depressurize system purge
Adapters and Tube Fittings Index
dapters and Tube Fittings Index lphabetical Index PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES dapters 196 Braze and
RegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK
Piston Accumulators Series Catalog ontents
atalog 1630-7ontents Piston ccumulators Series 3000 Series 3000 Piston ccumulators Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring
INSTALLATION, OPERATION AND MAINTENANCE GUIDE
INSTALLATION, OPERATION AND Placement in Pipeline System When installing Process Development & Control s ElastoTITE Elastomer-Hinged Check Valves in a pipeline, a minimum of five pipe diameters should
Smooth Vent Valve XVD. Series
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
Filter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4
eries eries ilter Regulator ilter Regulator with ackflow unction ow to Order lean series opper, fluorine and silicon-free low particle generation ilter regulator 10 03 21 03 q w e r t y "" must always
Manual retractable fitting with safe-to-operate rotary drive
Manual Retractable Fittings SensoGate W M Manual retractable fitting with safe-to-operate rotary drive Revolutionary operation The SensoGate W M has a manual rotary drive, which enables the fitting to
Smooth Vent Valve. Series XVD XL XL Q D- XVD XGT CYV
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
One-touch Fittings Manifold. Porting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting.
One-touch Fittings Manifold Series KM RoHS Compact piping possible. Manifold piping possible. Many varieties (0 types) are available. s give the most efficient operation. KM1 KM1 orting Rc female thread
ACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series
M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited
ALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
Smooth Vent Valve. XVD Series
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
MODEL MN-PWV PRESSURIZED WATER VESSEL ASSEMBLY OPERATING MANUAL
MODEL MN-PWV PRESSURIZED WATER VESSEL ASSEMBLY OPERATING MANUAL Prepared by CR Manning Edited by SC Woidtke Rev August 22, 2011 PRESSURIZED WATER VESSEL OPERATING MANUAL 1. Background 1.1 The Pressurized
MCB All fluids. All stainless steel
MCB All fluids All stainless steel Stainless steel anti-pollution technology at the service Applications Clean-break connections and disconnections for all fluids, without spillage, in corrosive environments,
4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
World Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
Proportional Relief Valves
Proportional Relief ValvesR Series 1 www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to psig (0.7 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections
TYPE 3710 CARTRIDGE SPLIT SEAL Technical Specification
A Mating Ring B Mating Ring/ Retaining Ring C Mating Ring/ Clamp Ring D Mating Ring Adapter E Primary Ring F Primary Ring/ Retaining Ring G Finger Springs H Spring Retainer I Gland O-ring J Flat Gasket
FILTON SWIVEL JOINTS. technical manual
SWIVEL JOINTS technical manual FILTON SWIVEL JOINTS AN INTRODUCTION What are Swivel Joints? Swivel Joints are sealing devices which allow the leakproof transfer of fluid to and from slow and intermittent
CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
Piston Accumulators Series Catalog ontents
atalog 1630-7ontents Piston ccumulators Series 3000 Series 3000 Piston ccumulators Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring
LRS(H)4 Pressure-Reducing Regulator User Manual
LRS(H)4 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be considered
Installation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Operating instructions - Translation of the original -
Operating instructions - Translation of the original - 5091 xxx 000-xxx Check valve (O-Ring - design) DN 10 - DN 100, DN 1inch - DN 4inch EPDM Male part - welding end (G-S) 23.2.12 KIESELMANN GmbH Paul-Kieselmann-Str.4-10
CLARK 200 Series Vortex Flow Transmitter Frequency Output, 1/4 to 1.0 Pipe Sizes, Rugged Molded PPA Construction
www.clarksol.com LRK 200 Series Vortex Flow Transmitter Frequency Output, 1/4 to 1.0 Pipe s, Rugged Molded PP onstruction DESRIPTION The series 200 vortex flow transmitters are designed with equipment
Saf-T Vent EZ Seal Plus
Technical and Dimensional Data Saf-T Vent EZ Seal Plus Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange
RD(H)20/25 Pressure-Reducing Regulator User Manual
RD(H)20/25 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be
THE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301
THE HF-300 SERIES Operating and Service Manual Series includes all variants of HF-300/301 Issue A July 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 3.1. Spring Loaded...
INSTRUMENTATION VALVES
INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION
HOSE & FLEXIBLE TUBING
http://southwest.swagelok.com HOSE & FLEXIBLE TUBING PROVIDED BY SWAGELOK SOUTHWEST SWAGELOK SOUTHWEST Swagelok Hose and Flexible Tubing Metal Hose & Tubing FX Series Metal Hose FM Series Metal Hose FJ
LRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator.
LRS(H)4 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to the
Buying more than 11 gauges? Call Lesman for additional discounts.
Low Cost Liquid Filled Pressure Gauges Size: 1.5", 2", and 2.5" Accuracy: 2.5% of full scale Materials: Case and ring: 304 stainless steel; Window: Polycarbonate; Seals: Buna-N; Pointer: Black-finished
INTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
INSTALLATION & MAINTENANCE INSTRUCTION
ARCHON Industries, Inc Liquid Level Gauges Models: BT-LLG ND-LLG INSTALLATION & MAINTENANCE INSTRUCTION Instruction No.: 1014.2 Revision Issued: 3/01/03 Approved: Engineering Manager Warning ONLY QUALIFIED
Model AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K
Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424
An example of systems that are inherently excellent applications for the cupronickel product are:
W&O Supply, founded in 1975, is the leading provider of marine piping solutions in the United States. W&O Supply, through its branch locations, distributes and provides services for valves, pipe, fittings,
Installation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No
Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Guide Cables No Guide Cables 1 August 4, 2011 Assembly Instructions: (Shown with a 2 board, 12 ft kit) ITEM NO. PART NUMBER DESCRIPTION
Y692VB Series Vacuum Breaker
Y692VB Series Vacuum Breaker Bulletin 71.3:Y692VB June 2009 W7429 Figure 1. Type Y692VB Vacuum Breaker Introduction The Y692VB Series direct-operated vacuum breakers are used for the precise control of
Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
VISI-FLO Sight Flow Indicators
Leading The Way in Fluid Handling Solutions Worldwide VISI-FLO Sight Flow Indicators Document No. H32199PA Revised: February, 2016 OPW Engineered Systems has been manufacturing sight flow indicators for
Precision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
Pressure Relief Valve DHV 718
Advantages frictionless components low maintenance low pressure increase up to fully opened valve constant low vibration controlling hermetically sealed by diaphragm for oscillating pumps for viscous media
Pressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
Inline & 90 Swivels. Hydraulic Live Swivels. Heavy Duty Ball Bearing, Rebuildable Design
Hydraulic Live Swivels Available In BSPP Inline & 90 Swivels Heavy Duty Ball Bearing, Rebuildable Design www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax: 763-784-7423 M1606.1711 Thousands
High Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
CPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846
CPVC Transition Fittings - Female Adapter STD4703BTLF12 1/2 CPVC X 1/2 FIP 25 250 CPVC Transition Fittings - Female Adapter STD4703BTLF34 3/4 CPVC X 3/4 FIP 25 250 CPVC Transition Fittings - Female Adapter
SELECTION GUIDE SELECTION GUIDE. Pressure, Flow, Level & Temperature Products for Ultra-Clean Processing P R E C I S I O N S E N S O R S
SELECTION GUIDE SELECTION GUIDE Pressure, Flow, Level & Temperature Products for Ultra-Clean Processing P R E C I S I O N S E N S O R S S t a i n l e s s S t e e l P r e s s u r e S w i t c h e s f o r
TWO POST RAM PACKAGE 5 GALLON READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.
OPERATOR S MANUAL TP0411G2XXXXXXXX INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. RELEASED: 2-15-10 INCLUDE MANUALS: AF0411GXXXXXX-XX-X Two-Ball Pump (97999-1496), 66731-X Follower Assembly (pn REVISED:
C 0G 00 N/US
G, GP, G, GP In-line flow regulators (block form) Uni-directional Ø /... / inch, Ø 4... mm High flow performance In-line or panel mounting Adjustment can be locked aptive regulator needle will not blow
Flow control valves Series RFU - RFO 2/
CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5
Connectors. SECTION 2 OF 3 SECTIONS ON CONNECTORS VHP Tees and Crosses. Top Seller SEE STARRED PRODUCTS. VHP Tees & Crosses for Capillary Tubing
SECTION 2 OF 3 SECTIONS ON CONNECTORS VHP Tees and Crosses VHP Tees & Crosses for Capillary Tubing VHP Tees & Crosses for 1/16 OD Tubing IDEX Health & Science offers Very High Pressure, designed to bring
Introduction to Stainless Steel Fitting Line
Introduction to Fitting Line he wyer Series -1000 quality tube fittings have been designed and manufactured to provide reliable leak-free connections in a wide variety of applications. reliable leak-free
Instruments AQDC. Aluminium Quick Disconnects. Light-weight, quick and reliable method a making a number of pneumatic connections.
AQDC Aluminium Quick Disconnects Instruments Light-weight, quick and reliable method a making a number of pneumatic connections. 8, 16, 24 and 32 port stainless steel quick disconnects. Available with
Filter regulator. Accessory. Description. Symbol. B With bracket With round. Port size. (Without limit indicator) Body size.
eries ow to Order opper, fluorine and silicon-free + Low particle generation il ote 1) ote 2) part no. lean series hread type Rc racket assembly ote ) ote 9) 1.0a 0.2a / -20 49-01 49-2-01 ilter regulator
Hydrogen Valves, Fittings and Tubing
Hydrogen Valves, Fittings and Tubing utech is a leading brand of high-pressure valves, fittings and tubing designed to meet the critical requirements of today s most severe applications. We prove our commitment
High-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
Direct Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
Visual Index K4 BSP Adapters
K4 BP Adapters I 4300 atalog K4 BP Adapters 60 one BP Adapters traights HMK4 Union WMK4W4NM Bulkhead Union F6MK4 60 wivel / 60 one H6MK4 wivel Union FMK4 NPTF / 60 one F3MK4 BPT / 60 one G4MK4 / 60 one